Smart Polymeric Gels: Redefining the Limits of Biomedical Devices

Recent advances of intelligent polymer gels as active carriers for medical imaging-guided cancer therapy: A review

Cancer is a major global health challenges and various imaging-guided techniques are gaining prominence for its diagnosis and therapy with the advantages of high sensitivity, spatial resolution, and quantitative capability. The effectiveness of these approaches mainly relies on the establishment of a responsive platform. The intelligent polymer gel composites as the active carriers have drawn considerable attention owing to their outstanding versatility, three-layer network structure, mechanical adjustability and so forth, which may be contribute to loading drug, imaging probe, and targeting biomarkers in medical imaging-guided cancer therapy (IGCT). In this review, significant progress has been highlighted in fabrication of intelligent polymer gel composites with multi-functional molecules for the anticancer drugs delivery systems, multimodal imaging-guided management and developing molecular devices in various tumors. In addition, we also explore the current challenges and future development directions of these composites as carriers with the assistance of IGCT for precise anti-cancer applications in clinical practice.

A functional eutectogel based on ultrahigh-molecular weight polymers: Physical entanglements in deep eutectic solvent

Eutectogels have emerged as a promising material for wearable devices due to its superior ionic conductivity, non-volatility, and low cost. Despite numerous efforts, only a limited number of polymers and gelling mechanisms have been successfully employed in the fabrication of eutectogels. In this study, an effective three-dimensional network is developed based on the entanglements of polymer chains, facilitating the formation of an entangled eutectogel. The fabrication process involves directly dissolving ultra-high molecular weight polyvinylpyrrolidone (PVP) in deep eutectic solvent (reline) through a simple heating-cooling method. The resulting eutectogel, containing 40 wt% PVP, exhibits excellent stretchability of 1410 % strain, toughness of 544.8 kJ/m3, and ionic conductivity of 0.015 S/m. It also generates a reliable resistance signal suitable for strain-sensing applications. Furthermore, this entangled eutectogel displays self-healing capabilities, enabled by the diffusion and re-entanglement of polymer chains. This work not only demonstrates a facile fabrication approach for an entangled eutectogel but also provides the first investigation into employing long chain entanglements in the development of eutectogels.

Cryogels Composites: Recent Improvement in Bone Tissue Engineering

Autogenous bone grafts have long been considered the optimal choice for bone reconstruction due to their excellent biocompatibility and osteogenic properties. However, their limited availability and associated donor site morbidity have led to exploration of alternative bone substitutes. Cryogels, with their interconnected porosity, shape recovery, and enhanced mass transport capabilities, have emerged as a promising polymer-based solution. By incorporating bioactive glasses and nanofillers, cryogel composites offer bioactivity, cost-efficiency, and easy cell integration. This approach not only enhances bone regeneration but also underscores the broader role of nanotechnology in regenerative medicine. This mini-review discusses the advancement of organic-inorganic composites, focusing on biopolymeric cryogels and inorganic elements for reinforcement. We highlight how cryogels can be integrated into minimally invasive procedures, reducing patient distress and complications, and advanced 3D-printing techniques that enable further customization of these materials to mimic bone tissue architecture, offering potential for patient-specific treatments.

Hofmeister-Effect-Driven Hybrid Glycerogels for Perfect Wide-Temperature Shape Fixity and Shape Recovery in Soft Robotics Applications

Shape memory gels have emerged as crucial elements in soft robotics, actuators, and biomedical devices; however, several problems persist, like the trade-off between shape fixity and shape recovery, and the limited temperature range for their application. This article introduces a new class of shape memory hybrid glycerogels (GGs) designed to address these limitations. The well-modulated internal structure of the GGs, facilitated by the Hofmeister salting-out effect, strategically incorporates a higher crystallite content, abundant crosslinking points, and a high elastic modulus. Unlike reported shape memory gels, the GG exhibits a perfect triple-step shape memory behavior in air with 100% shape fixity in a wide programming temperature range (75-135 °C) and simultaneously achieves 100% shape recoverability. The gel recovers its shape at -40 °C under near-infrared light across a wide programming temperature range (25-135 °C), showing unexpected initiation even at subzero temperatures. Inspired by the mechanics of composite structures, a method is proposed to integrate the GG seamlessly with a shape memory alloy, which further expands the temperature range that yields perfect shape memory properties. Finally, two light-controlled fluttering and crawling soft robot prototypes are engineered to illustrate the versatility and potential applications of the composite gel in soft robotics.

Vitreous substitutes and tamponades - A review of types, applications, and future directions

Vitreous substitutes and tamponades occupy the vitreous cavity following vitrectomy in the management of various conditions such as retinal detachment, macular hole, and diabetic retinopathy. Such replacements can be for the short term (gases such as sulfur hexafluoride (SF6) and perfluoropropane (C3F8) or long term (such as silicone oils). Certain substitutes such as perfluorocarbon liquids are used only transiently during surgery as "a third hand" or rarely till a few days post surgery. Hydrogels and hyaluronan derivatives are among the newer vitreous substitutes that are showing promise for the future, albeit still under investigation. still being investigated for use as vitreous substitutes. These materials have properties similar to the natural vitreous and may offer advantages such as improved biocompatibility and biodegradability. Although vitreous substitutes are valuable tools in treating vitreoretinal conditions, they carry risks and potential complications such as cataract formation, glaucoma, and inflammation. The current communication extensively reviews the available literature on vitreous tamponades. It details the composition and properties of various vitreous substitutes and tamponades available for the clinician, highlighting the techniques of usage, indications, and limitations.

Radiopaque, Self-Immolative Poly(benzyl ether) as a Functional X-ray Contrast Agent: Synthesis, Prolonged Visibility, and Controlled Degradation

A self-immolative radiocontrast polymer agent has been newly designed for this study. The polymer agent is composed of a degradable poly(benzyl ether)-based backbone that enables complete and spontaneous depolymerization upon exposure to a specific stimulus, with iodophenyl pendant groups that confer a radiodensity comparable to that of commercial agents. In particular, when incorporated into a biodegradable polycaprolactone matrix, the agent not only reinforces the matrix and provides prolonged radiopacity without leaching but also governs the overall degradation kinetics of the composite under basic aqueous conditions, allowing for X-ray tracking and exhibiting a predictable degradation until the end of its lifespan. Our design would be advanced with various other components to produce synergistic functions and extended for applications in implantable biodegradable devices and theragnostic systems.

Bioresorbable, wireless, passive sensors for continuous pH measurements and early detection of gastric leakage

Continuous monitoring of biomarkers at locations adjacent to targeted internal organs can provide actionable information about postoperative status beyond conventional diagnostic methods. As an example, changes in pH in the intra-abdominal space after gastric surgeries can serve as direct indicators of potentially life-threatening leakage events, in contrast to symptomatic reactions that may delay treatment. Here, we report a bioresorbable, wireless, passive sensor that addresses this clinical need, designed to locally monitor pH for early detection of gastric leakage. A pH-responsive hydrogel serves as a transducer that couples to a mechanically optimized inductor-capacitor circuit for wireless readout. This platform enables real-time monitoring of pH with fast response time (within 1 hour) over a clinically relevant period (up to 7 days) and timely detection of simulated gastric leaks in animal models. These concepts have broad potential applications for temporary sensing of relevant biomarkers during critical risk periods following diverse types of surgeries.

Multi-DNA-Modified Double-Network Hydrogel with Customized Microstructure: A Novel System for Living Circulating Tumor Cells Capture and Real-Time Detection

The precise and effective isolation of living circulating tumor cells (CTCs) from peripheral blood, followed by their real-time monitoring, is crucial for diagnosing cancer patients. In this study, a cell-imprinted double-network (DN) hydrogel modified with circular multi-DNA (CMD), coined the CMD-imprinted hydrogel with fixed cells as templates (CMD-CIDH), was developed. The hydrogel featured a customized surface for proficient capture of viable CTCs and in situ real-time fluorescent detection without subsequent release. The customized surface, constructed using polyacrylamide/chitosan DN hydrogel as the matrix on the cell template, had a dense network structure, thereby ensuring excellent stability and a low degradation rate. Optimal capture efficiencies, recorded at 93 ± 3% for MCF-7 cells and 90 ± 2% for Hela cells, were achieved by grafting the CMD and adjusting the nodule size on the customized surface. The capture efficiency remained significantly high at 67 ± 11% in simulated breast cancer patient experiments even at a minimal concentration of 5 cells mL-1. Furthermore, CMD grafted onto the surface produced a potent fluorescence signature, enabling in situ real-time fluorescent detection of the target cell's growth state even in complex environments. The customized surface is highly efficient for screening CTCs in peripheral blood and has promising potential for setting up the CTCs culture.

Multi-stimuli-responsive Hydrogels for Therapeutic Systems: An Overview on Emerging Materials, Devices, and Drugs

The rising interest in hydrogels nowadays is due to their usefulness in physiological conditions as multi-stimuli-responsive hydrogels. To reply to the prearranged stimuli, including chemical triggers, light, magnetic field, electric field, ionic strength, temperature, pH, and glucose levels, dual/multi-stimuli-sensitive gels/hydrogels display controllable variations in mechanical characteristics and swelling. Recent attention has focused on injectable hydrogel-based drug delivery systems (DDS) because of its promise to offer regulated, controlled, and targeted medication release to the tumor site. These technologies have great potential to improve treatment outcomes and lessen side effects from prolonged chemotherapy exposure.

Advances in gum-based hydrogels and their environmental applications

Gum-based hydrogels (GBHs) have been widely employed in diverse water purification processes due to their environmental properties, and high absorption capacity. More desired properties of GBHs such as biodegradability, biocompatibility, material cost, simplicity of manufacture, and wide range of uses have converted them into promising materials in water treatment processes. In this review, we explored the application of GBHs to remove pollutants from contaminated waters. Water resources are constantly being contaminated by a variety of harmful effluents such as heavy metals, dyes, and other dangerous substances. A practical way to remove chemical waste from water as a vital component is surface adsorption. Currently, hydrogels, three-dimensional polymeric networks, are quite popular for adsorption. They have more extensive uses in several industries, including biomedicine, water purification, agriculture, sanitary products, and biosensors. This review will help the researcher to understand the research gaps and drawbacks in this field, which will lead to further developments in the future.

A Critical Review of Palladium Nanoparticles Decorated in Smart Microgels

Palladium nanoparticles (Pd) combined with smart polymer microgels have attracted significant interest in the past decade. These hybrid materials have unique properties that make them appealing for various applications in biology, environmental remediation, and catalysis. The responsive nature of the microgels in these hybrids holds great promise for a wide range of applications. The literature contains diverse morphologies and architectures of Pd nanoparticle-based hybrid microgels, and the architecture of these hybrids plays a vital role in determining their potential uses. Therefore, specific Pd nanoparticle-based hybrid microgels are designed for specific applications. This report provides an overview of recent advancements in the classification, synthesis, properties, characterization, and uses of Pd nanostructures loaded into microgels. Additionally, the report discusses the latest progress in biomedical, catalytic, environmental, and sensing applications of Pd-based hybrid microgels in a tutorial manner.

Temperature-Sensitive Hydrogels as Carriers for Modulated Delivery of Acetaminophen

The purposes of this study are the polymerization of temperature-sensitive copolymers based on N-isopropyl acrylamide and 10 mol % of 2-hydroxypropylmethacrylate, characterisations of their thermal, morphological and swelling properties, as well as the analysis of potential application in drug-delivery systems. Acetaminophen, the representative of non-steroidal anti-inflammatory drugs, was used as a model drug in this study. It is a common pain relief drug, which is also used for fever treatment. However, oral administration comes with certain health risks, mainly the overdose and frequent administration of up to four times a day. The goal of applying temperature-sensitive hydrogel is to enable extended administration once a day, depending on the body temperature. The swelling behavior of the obtained poly(N-isopropyl acrylamide-co-2-hydroxypropylmethacrylate) (p(NIPA/HPMA)) hydrogels and their temperature-sensitivity, kinetics and order of swelling processes at 18 and 38 °C were analyzed. The thermal properties of these hydrogels were observed by the DSC method, and the obtained thermograms showed both melting and glass transitions. The drug delivery system of p(NIPA/HPMA) hydrogels with loaded acetaminophen was analyzed using scanning electron microscopy and Fourier transform infrared spectroscopy methods. Structural analysis of FTIR spectra indicates that non-covalent intermolecular interactions of the type of hydrogen bonds were formed among functional groups of acetaminophen and side-chains of p(NIPA/HPMA) hydrogels. The surface structure of p(NIPA/HPMA) hydrogels after drug loading indicates the acetaminophen presence into the pores of the hydrogel network, and their loading efficiency was higher than 92%. Qualitative and quantitative analysis of acetaminophen, determined by the high-pressure liquid chromatography method, showed that about 90-99% of the loaded amount was released from p(NIPA/HPMA) hydrogels within 24 h. Kinetic parameters of the acetaminophen release under simulated gastrointestinal conditions were determined. Based on obtained results, the drug delivery system of temperature-sensitive p(NIPA/HPMA) hydrogels with loaded acetaminophen could be suitable for additional investigation for modulated drug administration, e.g., for extended drug administration.

Urinary Exosomal Metabolites: Overlooked Clue for Predicting Cardiovascular Risk

Over the last decade, increasing research has focused on urinary exosomes (UEs) in biological fluids and their relationship with physiological and pathological processes. UEs are membranous vesicles with a size of 40-100 nm, containing a number of bioactive molecules such as proteins, lipids, mRNAs, and miRNAs. These vesicles are an inexpensive non-invasive source that can be used in clinical settings to differentiate healthy patients from diseased patients, thereby serving as potential biomarkers for the early identification of disease. Recent studies have reported the isolation of small molecules called exosomal metabolites from individuals' urine with different diseases. These metabolites could utilize for a variety of purposes, such as the discovery of biomarkers, investigation of mechanisms related to disease development, and importantly prediction of cardiovascular diseases (CVDs) risk factors, including thrombosis, inflammation, oxidative stress, hyperlipidemia as well as homocysteine. It has been indicated that alteration in urinary metabolites of N1-methylnicotinamide, 4-aminohippuric acid, and citric acid can be valuable in predicting cardiovascular risk factors, providing a novel approach to evaluating the pathological status of CVDs. Since the UEs metabolome has been clearly and precisely so far unexplored in CVDs, the present study has specifically addressed the role of the mentioned metabolites in the prediction of CVDs risk factors.

A Review of Research Progress on the Performance of Intelligent Polymer Gel

Intelligent polymer gel, as a popular polymer material, has been attracting much attention for its application. An intelligent polymer gel will make corresponding changes to adapt to the environment after receiving stimuli; therefore, an intelligent polymer gel can play its role in many fields. With the research on intelligent polymer gels, there is great potential for applications in the fields of drug engineering, molecular devices, and biomedicine in particular. The strength and responsiveness of the gels can be improved under different configurations in different technologies to meet the needs in these fields. There is no discussion on the application of intelligent polymer gels in these fields; therefore, this paper reviews the research progress of intelligent polymer gel, describes the important research of some intelligent polymer gel, summarizes the research progress and current situation of intelligent polymer gel in the environment of external stimulation, and discusses the performance and future development direction of intelligent polymer gel.

Microwave-Treated Physically Cross-Linked Sodium Alginate and Sodium Carboxymethyl Cellulose Blend Polymer Film for Open Incision Wound Healing in Diabetic Animals-A Novel Perspective for Skin Tissue Regeneration Application

This study aimed at developing the microwave-treated, physically cross-linked polymer blend film, optimizing the microwave treatment time, and testing for physicochemical attributes and wound healing potential in diabetic animals. Microwave-treated and untreated films were prepared by the solution casting method and characterized for various attributes required by a wound healing platform. The optimized formulation was tested for skin regeneration potential in the diabetes-induced open-incision animal model. The results indicated that the optimized polymer film formulation (MB-3) has significantly enhanced physicochemical properties such as high moisture adsorption (154.6 ± 4.23%), decreased the water vapor transmission rate (WVTR) value of (53.0 ± 2.8 g/m²/h) and water vapor permeability (WVP) value (1.74 ± 0.08 g mm/h/m²), delayed erosion (18.69 ± 4.74%), high water uptake, smooth and homogenous surface morphology, higher tensile strength (56.84 ± 1.19 MPa), and increased glass transition temperature and enthalpy (through polymer hydrophilic functional groups depicting efficient cross-linking). The in vivo data on day 16 of post-wounding indicated that the wound healing occurred faster with significantly increased percent re-epithelialization and enhanced collagen deposition with optimized MB-3 film application compared with the untreated group. The study concluded that the microwave-treated polymer blend films have sufficiently enhanced physical properties, making them an effective candidate for ameliorating the diabetic wound healing process and hastening skin tissue regeneration.

Fast Transport and Transformation of Biomacromolecular Substances via Thermo-Stimulated Active "Inhalation-Exhalation" Cycles of Hierarchically Structured Smart pNIPAM-DNA Hydrogels

Although smart hydrogels hold great promise in biosensing and biomedical applications, their response to external stimuli is governed by the passive diffusion-dependent substance transport between hydrogels and environments and within the 3D hydrogel matrices, resulting in slow response to biomacromolecules and limiting their extensive applications. Herein, inspired by the respiration systems of organisms, an active strategy to achieve highly efficient biomolecular substance transport through the thermo-stimulated "inhalation-exhalation" cycles of hydrogel matrices is demonstrated. The cryo-structured poly(N-isopropylacrylamide) (pNIPAM)-DNA hydrogels, composed of functional DNA-tethered pNIPAM networks and free-water-containing macroporous channels, exhibit thermally triggered fast and reversible shrinking/swelling cycles with high-volume changes, which drive the formation of dynamic water stream to accelerate the intake of external substances and expelling of endogenous substances, thus promoting the functional properties of hydrogel systems. Demonstrated by catalytic DNAzyme and CRISPR-Cas12a-incorporating hydrogels, significantly enhanced catalytic efficiency with up to 280% and 390% is achieved, upon the introduction of active "inhalation-exhalation" cycles, respectively. Moreover, remotely near-infrared (NIR)-triggering of "inhalation-exhalation" cycles is achieved after the introduction of NIR-responsive MXene nanosheets into the hydrogel matrix. These hydrogel systems with enhanced substance transport and transformation properties hold promise in the development of more effective biosensing and therapeutic systems.

Fabrication of Thermo-Responsive Controllable Shape-Changing Hydrogel

Temperature response double network (DN) hydrogels comprising a network formed by polymerization of methacrylic acid (MA) modified PVA, N,N'-methylene bis(acrylamide), N-isopropylacryl amide (NIPAM), and one formed from crystalline polyvinyl alcohol (PVA) are prepared in a 3D printed tailor-made mold. The (PVA-MA)-g-PNIPAAm thermoset intermediate is formed in water by a radical, photo-initiated process, and in the presence of dissolved PVA polymers. A subsequent freezing-thawing sequence induces the crystallization of the PVA network, which forms a second network inside the thermoset NIPAM polymer. The prepared hydrogel is thermoresponsive by the phase transition of PNIPAAm segments (T ≈ 32 °C) and has good mechanical properties (tensile strength 1.23 MPa, compressive strength 1.47 MPa). Thermal cycling between room temperature at 40 or 50 °C shows the product converses from a virgin-state to a steady-state, which most likely involves the reorganization of PVA crystals. The swelling-deswelling cycles remain clear at a length change of about 13%.

Mechanically Diverse Gels with Equal Solvent Content

Mechanically diverse polymer gels are commonly integrated into biomedical devices, soft robots, and tissue engineering scaffolds to perform distinct yet coordinated functions in wet environments. Such multigel systems are prone to volume fluctuations and shape distortions due to differential swelling driven by osmotic solvent redistribution. Living systems evade these issues by varying proximal tissue stiffness at nearly equal water concentration. However, this feature is challenging to replicate with synthetic gels: any alteration of cross-link density affects both the gel's swellability and mechanical properties. In contrast to the conventional coupling of physical properties, we report a strategy to tune the gel modulus independent of swelling ratio by regulating network strand flexibility with brushlike polymers. Chemically identical gels were constructed with a broad elastic modulus range at a constant solvent fraction by utilizing multidimensional network architectures. The general design-by-architecture framework is universally applicable to both organogels and hydrogels and can be further adapted to different practical applications.

Cross-Linking Agents for Electrospinning-Based Bone Tissue Engineering

Electrospun nanofibers are promising bone tissue scaffolds that support bone healing due to the body’s structural similarity to the extracellular matrix (ECM). However, the insufficient mechanical properties often limit their potential in bone tissue regeneration. Cross-linking agents that chemically interconnect as-spun electrospun nanofibers are a simple but effective strategy for improving electrospun nanofibers’ mechanical, biological, and degradation properties. To improve the mechanical characteristic of the nanofibrous bone scaffolds, two of the most common types of cross-linking agents are used to chemically crosslink electrospun nanofibers: synthetic and natural. Glutaraldehyde (GTA) is a typical synthetic agent for electrospun nanofibers, while genipin (GP) is a natural cross-linking agent isolated from gardenia fruit extracts. GP has gradually gained attention since GP has superior biocompatibility to synthetic ones. In recent studies, much more progress has been made in utilizing crosslinking strategies, including citric acid (CA), a natural cross-linking agent. This review summarizes both cross-linking agents commonly used to improve electrospun-based scaffolds in bone tissue engineering, explains recent progress, and attempts to expand the potential of this straightforward method for electrospinning-based bone tissue engineering.

Surface Reconstruction of Fluoropolymers in Liquid Media

Surface reconstruction is the rearrangement of atoms or molecules at an interface in response to a stimulus, driven by lowering the overall free energy of the system. Perfluoroalkyl acrylate polymers with short side chains undergo reconstruction at room temperature when exposed to water. Here, we use contact angle aging to examine the liquid- and temperature- dependency of surface reconstruction of plasma polymerized perfluoroalkyl acrylates. We use a first order kinetic model to examine the dynamics of reconstructive processes. Our results show that, above the bulk melting point of the polymers, the contact angles of both polar and nonpolar (hydrocarbon) liquids show a time dependency well fit by the model. We conclude that surface reconstruction can be driven by the preferential segregation of hydrocarbon and fluorocarbon moieties as well as by polar interactions. This has implications in terms of using fluorocarbons to design oleophobic surfaces (and vice versa) and in terms of designing fluorocarbon and/or hydrocarbon surfaces with switchable wettability.

Photoresponsive Gelation of Four-Armed Poly(ethylene glycol) with Photodimerizable Groups

Standard hydrogels prepared by free radical polymerization (FRP) have heterogeneous structures with a wide mesh size distribution, which affect their mechanical and separation properties. Recent research has identified four-armed poly(ethylene glycol) (tetra-PEG) as a solution to this problem. tetra-PEG gels with a homogeneous network can be prepared and applied as high-strength gels and cell-culture substrates by reacting two types of tetra-PEG with different reactive groups at the ends. In this study, we report a photoresponsive tetra-PEG that undergoes a phase transition from a sol to a gel state in response to light. tetra-PEGs containing cinnamoyl and maleimide groups at the ends of the four-armed chains were found to gel when exposed to light. The effects of polymer concentration and light irradiation time on the gelation of tetra-PEG containing photodimerization groups were investigated. The results showed that the elastic modulus of the gel increased with the increase in the light irradiation time.

Biomedical Application, Patent Repository, Clinical Trial and Regulatory Updates on Hydrogel: An Extensive Review

Hydrogels are known for their leading role in biomaterial systems involving pharmaceuticals that fascinate material scientists to work on the wide variety of biomedical applications. The physical and mechanical properties of hydrogels, along with their biodegradability and biocompatibility characteristics, have made them an attractive and flexible tool with various applications such as imaging, diagnosis and treatment. The water-cherishing nature of hydrogels and their capacity to swell-contingent upon a few ecological signals or the simple presence of water-is alluring for drug conveyance applications. Currently, there are several problems relating to drug delivery, to which hydrogel may provide a possible solution. Hence, it is pertinent to collate updates on hydrogels pertaining to biomedical applications. The primary objective of this review article is to garner information regarding classification, properties, methods of preparations, and of the polymers used with particular emphasis on injectable hydrogels. This review also covers the regulatory and other commerce specific information. Further, it enlists several patents and clinical trials of hydrogels with related indications and offers a consolidated resource for all facets associated with the biomedical hydrogels.

Synthesis and Characterization of Antibacterial Carbopol/ZnO Hybrid Nanoparticles Gel

This study recommends Carbopol/zinc oxide (ZnO) hybrid nanoparticles gel as an efficient antibacterial agent against different bacterial species. To this end, ZnO nanoparticles were synthesized using chemical precipitation derived from a zinc acetate solution with ammonium hydroxide as its precipitating agent under the effect of ultrasonic radiation. The synthesized ZnO nanoparticles were stabilized simultaneously in a freshly prepared Carbopol gel at a pH of 7. The chemical composition, phase identification, particle size and shape, surface charge, pore size distribution, and the BET surface area of the ZnO nanoparticles, as well as the Carbopol/ZnO hybrid Nanoparticles gel, were by XRD, SEM, TEM, AFM, DLS, Zeta potential and BET instruments. The results revealed that the synthesized ZnO nanoparticles were well-dispersed in the Carbopol gel network, and have a wurtzite-crystalline phase of spherical shape. Moreover, the Carbopol/ZnO hybrid nanoparticles gel exhibited a particle size distribution between ~9 and ~93 nm, and a surface area of 54.26 m2/g. The synthesized Carbopol/ZnO hybrid nanoparticles gel underwent an antibacterial sensitivity test against gram-negative K. pneumonia (ATCC 13883), Bacillus subtilis (ATCC 6633), and gram-positive Staphylococcus aureus (ATCC 6538) bacterial strains, and were compared with ampicillin as a reference antibiotic agent. The obtained results demonstrated that the synthesized Carbopol/ZnO hybrid nanoparticles gel exhibited a compatible bioactivity against the different strains of bacteria.

Exchange Counterion in Polycationic Hydrogels: Tunability of Hydrophobicity, Water State, and Floating Capability for a Floating pH Device

Smart gel materials are capable of controlling and switching swelling, water state, and wettability properties triggered by external stimuli. In this study, we fabricated a series of polyelectrolyte hydrogels bearing a 3-trimethylammoniumpropyl pendant to a methacrylamide-based backbone and examined the switchability with hydrophobic-like counteranions. The exchange between the initial chloride and camphor sulfate (CaS), dodecyl sulfate (DS), and perfluorooctanoate (PFO) counterions was investigated. The kinetics of the exchange showed that the fast exchange (within 4 h) of PFO allowed for a favorable coordination for ion pairing, resulting in a decrease in hydration. The reversibility of the exchange to the Cl⁻ ion was only enabled for the CaS ion due to its bulkiness, while the PFO and DS hydrogels were unable to exchange, even by using tetrabutylammonium chloride, which is a structurally similar reagent, due to aggregation or the coagulates in the collapsed state of the linear tails of the counterions. The hydrogels exhibited a modulable water state and water swelling. Moreover, the hydrogels containing DS and PFO, as counterions, showed surface hydrophobic (contact angle 90°) and high hydrophobic (110°) behavior, respectively. The Raman spectrometry fluorescence with a pyrene probe indicated an increase in strong hydrogen-bonded water molecules, water confinement, and hydrophobic domains in the PFO hydrogel. Moreover, the PFO-modified hydrogel demonstrated a free-floating ability on the water surface, with a strong water repellency, showing that it has the potential to be applied in a floating pH detection device to distinguish between volatile and nonvolatile bases in a controlled manner.

Thermoresponsive properties of polymer hydrogels induced by copolymerization of hydrophilic and hydrophobic monomers: comprehensive study of monomer sequence and water affinity

In order to raise the possibility of the practical use of thermoresponsive hydrogels in various fields, it is imperative to achieve on-demand control of responsive behavior especially by using a simple synthetic method with common monomers. To this end, we synthesized various hydrophilic/hydrophobic copolymer hydrogels from common acrylamide derivatives and acrylate monomers via free radical copolymerization, and examined the correlation between the structure and the swelling properties of the obtained gels, specifically from the viewpoint of the monomer sequence in the network chains and the affinity to water molecules. The obtained gels with a hydrophobic acrylamide monomer were shown to exhibit a sharp volume change in water upon heating at suitable monomer compositions. In contrast, the gels consisting of a hydrophobic acrylate monomer only decreased the swelling degree with no significant thermoresponsive volume change. The formation of a local amphiphilic structure without a long hydrophobic sequence is critical for achieving sharp thermoresponsiveness. Moreover, the water affinity was drastically changed at a sharp volume transition with the copolymer gels of a hydrophobic acrylamide. This transition was most likely driven by an entropic factor because of the strong contribution of the hydration/dehydration of the network chains. The comparison of the temperature-responsive behavior of the gels with that of the corresponding linear copolymers demonstrated that the crosslinking structure made significant hydrophobic contribution to the responsive behavior.

Protein Hydrogels: The Swiss Army Knife for Enhanced Mechanical and Bioactive Properties of Biomaterials

Biomaterials are dynamic tools with many applications: from the primitive use of bone and wood in the replacement of lost limbs and body parts, to the refined involvement of smart and responsive biomaterials in modern medicine and biomedical sciences. Hydrogels constitute a subtype of biomaterials built from water-swollen polymer networks. Their large water content and soft mechanical properties are highly similar to most biological tissues, making them ideal for tissue engineering and biomedical applications. The mechanical properties of hydrogels and their modulation have attracted a lot of attention from the field of mechanobiology. Protein-based hydrogels are becoming increasingly attractive due to their endless design options and array of functionalities, as well as their responsiveness to stimuli. Furthermore, just like the extracellular matrix, they are inherently viscoelastic in part due to mechanical unfolding/refolding transitions of folded protein domains. This review summarizes different natural and engineered protein hydrogels focusing on different strategies followed to modulate their mechanical properties. Applications of mechanically tunable protein-based hydrogels in drug delivery, tissue engineering and mechanobiology are discussed.

A review on TiO2-based photocatalytic systems applied in fruit postharvest: Set-ups and perspectives

Titanium dioxide (TiO₂) is a photocatalytic material used to degrade ethylene, and it has been studied as an alternative postharvest technology. Although several studies have indicated the effective action of TiO₂ photocatalysis for delaying the fruit ripening, photocatalytic systems need to be well-designed for this application. Fruit is susceptible to environmental conditions like temperature, relative humidity, atmosphere composition and exposure to UV-light. This fragility associated with its variable ethylene production rate over its maturation stage limits the photocatalysis parameters optimization. Thus, this review aims to detail the reaction mechanisms, set-up, advantages, and limitations of TiO₂ photocatalytic systems based on polymers-TiO₂ nanocomposites and reactors containing TiO₂ immobilized into inorganic supports designed for fruit applications. It is expected that this review can elucidate the fundamental aspects that should be considered for the use of these systems.

Soft matter polysaccharide-based hydrogels as versatile bioengineered platforms for brain tissue repair and regeneration

Acute or chronic brain injuries promote deaths and the life-long debilitating neurological status where, despite advances in therapeutic strategies, clinical outcome hardly achieves total patient recovery. In recent decades, brain tissue engineering emerged as an encouraging area of research for helping in damaged central nervous system (CNS) recovery. Polysaccharides are abundant naturally occurring biomacromolecules with a great potential enhancement of advanced technologies in brain tissue repair and regeneration (BTRR). Besides carrying rich biological information, polysaccharides can interact and communicate with biomolecules, including glycosaminoglycans present in cell membranes and many signaling moieties, growth factors, chemokines, and axon guidance molecules. This review includes a comprehensive investigation of the current progress on designing and developing polysaccharide-based soft matter biomaterials for BTRR. Although few interesting reviews concerning BTRR have been reported, this is the first report specifically focusing on covering multiple polysaccharides and polysaccharide-based functionalized biomacromolecules in this emerging and intriguing field of multidisciplinary knowledge. This review aims to cover the state of art challenges and prospects of this fascinating field while presenting the richness of possibilities of using these natural biomacromolecules for advanced biomaterials in prospective neural tissue engineering applications.

Direct Observation of Photo-Induced Reversible Sol-Gel Transition in Block Copolymer Self-Assembly Containing an Azobenzene Ionic Liquid

Using atomic force microscopy, the photo-induced reversible changes in a block copolymer self-assembly containing an azobenzene ionic liquid, which undergoes sol-gel transition is directly observed. This is the first report on the sol-gel transition of an ABA-type block copolymer consisting of upper critical solution temperature (UCST)-type A blocks in a photoresponsive ionic liquid mixture. The sol-gel transition is accompanied by an order-to-disorder structural change, which subsequently induces a change in the ionic conductivity. Surprisingly, the photo-induced ionic conductivity and rheological changes occurs rapidly (≈30 s) despite the dense (≈80 wt%) polymeric system. The rapid structural change is probably attributable to the fast diffusion of the ionic liquid.

Microstructured Macromaterials Based on IPN Microgels

This study investigates the formation of microstructured macromaterials from thermo- and pH-sensitive microgels based on interpenetrating networks of poly-N-isopropylacrylamide (PNIPAM) and polyacrylic acid (PAA). Macromaterials are produced as a result of the deposition of microgel particles and subsequent crosslinking of polyacrylic acid subnetworks to each other due to the formation of the anhydride bonds during annealing. Since both PNIPAM and PAA are environment-sensitive polymers, one can expect that their conformational state during material development will affect its resulting properties. Thus, the influence of conditions of preparation for annealing (pH of the solution, the temperature of preliminary drying) on the swelling behavior, pH- and thermosensitivity, and macromaterial inner structure was investigated. In parallel, the study of the effect of the relative conformations of the IPN microgel subnetworks on the formation of macromaterials was carried out by the computer simulations method. It was shown that the properties of the prepared macromaterials strongly depend both on the temperature and pH of the PNIPAM-PAA IPN microgel dispersions. This opens up new opportunities to obtain materials with pre-chosen characteristics and environmental sensitivity.

Semi-Crystalline Copolymer Hydrogels as Smart Drug Carriers: In Vitro Thermo-Responsive Naproxen Release Study

In this study, poly(N-isopropylacrylamide-co-2-hydroxypropyl methacrylate) hydrogels were synthesized using free radical initiated copolymerization method. Four hydrogels with different cross-linker concentrations were prepared. Semi-crystalline, cross-linked copolymer networks were confirmed by FTIR, SEM and XRD analysis. Variation of swelling behaviour was monitored gravimetrically and thermo-responsiveness has been noticed. An application of synthesized thermo-responsive hydrogels as carriers for the modulated release of anti-inflammatory model drug was investigated. Moreover, naproxen loading into these hydrogels was also determined using FTIR, SEM and XRD techniques and release was analyzed using HPLC method at simulated physiological conditions. Swelling kinetic and mechanism of water transport, as well as diffusion of naproxen through the hydrogels were analyzed. Thus, the aim of this work was to study various compositions of obtained hydrogels and their possibility of application as a thermo-responsive carrier for prolonged naproxen release in order to evaluate as a potential candidate for drug carrier in future pharmaceutical applications.

Glycolipid-Based Oleogels and Organogels: Promising Nanostructured Structuring Agents

Over the past few decades, the scientific community is actively involved in the development of edible structuring agents suitable for food, cosmetics, agricultural, pharmaceutical, and biotechnology applications. In particular, edible oil structuring using simple amphiphiles would be the best alternative for the currently used trans and saturated fatty acids, which cause deleterious health effects and cardiovascular problems. In this report, we have made an attempt to address the aforementioned consequences, by synthesizing a new class of structuring agents by a judicious combination of δ-gluconolactone and ricinoleic acid, compounds classified as GRAS, using simple steps in good yield. To our delight, the synthesized glycolipids self-assemble in a wide variety of vegetable oils and commercially viable glycerol, ethylene glycol, and polyethylene glycol via various intermolecular interactions to form a gel. The morphology of molecular gels was investigated by optical microscopy and FESEM analysis, which reveal the existence of a tubular architecture with a diameter ranging from 75 to 150 nm. Rheological studies disclosed the viscoelastic nature, thermal processability, and thixotropic behavior of both oleogels and organogels. Altogether, self-assembled oleogel and organogel reported in this paper would potentially be used in food, agricultural, cosmetics, pharmaceutical, and biotechnological applications.

A Novel Temperature-Dependent Hydrogel Emulsion with Sol/Gel Reversible Phase Transition Behavior Based on Polystyrene-co-poly(N-isopropylacrylamide)/Poly(N-isopropylacrylamide) Core-Shell Nanoparticle

As a kind of temperature-responsive hydrogel, polystyrene-co-poly(N-isopropylacrylamide)/poly(N-isopropylacrylamide) (PS-co-PNIPAM/PNIPAM) core-shell nanoparticles prepared by two-step copolymerization are widely studied and used because of their specific structures and properties. Unlike most reports about the steady stability of PS-co-PNIPAM/PNIPAM core-shell nanoparticle hydrogel emulsion, in this work, the PS-co-PNIPAM/PNIPAM core-shell nanoparticle hydrogel emulsion (symbolized as PS/PNIPAM hydrogel emulsion), which is prepared after the second step of synthesis and without washing out a large number of PNIPAM polymer segments, shows a reversible temperature-dependent sol-gel transition characteristic during the temperature range of 34-80 °C. The PS/PNIPAM hydrogel emulsion is a normal solution at room temperature, and it changes from a sol to a gel statue when the temperature approaches up to low critical solution temperature (LCST). As the temperature continues to increase, the gel (core-shell nanoparticles as the crosslinkers and the linear PNIPAM chain as the 3D gel network) of the PS/PNIPAM hydrogel emulsion gradually shrinks and drains linearly. Compared with most crosslinked hydrogels, the hydrogel here can be arbitrarily changed in shape according to use needs, which is convenient for use, transportation, and storage. Here a new route is provided for the preparation of a PS/PNIPAM core-shell hydrogel nanoparticle system, as well as a new supramolecular crosslinking sol-gel system for application in biomedical materials, sensors, biological separation, drug release, macromolecular adsorption, and purification.

RETRACTED: A review on biomacromolecular hydrogel classification and its applications

This article has been retracted: please see Elsevier Policy on Article Withdrawal (https://www.elsevier.com/locate/withdrawalpolicy). This article has been retracted at the request of the Editor-in-Chief and Author. The work included substantial parts copied without attribution from a prior work by Varaprasad et al (2017): https://doi.org/10.1016/j.msec.2017.05.096

Hyaluronic Acid/Alginate Hydrogel Containing Hepatocyte Growth Factor and Promotion of Vocal Fold Wound Healing

BACKGROUND

Hepatocyte growth factor (HGF) has been shown to facilitate vocal fold (VF) wound healing. This study was undertaken to determine whether the therapeutic efficacy of HGF could be enhanced by applying it in hyaluronic acid and alginate (HA/ALG) composite hydrogels into VFs after injury in a rabbit model.

METHODS

HGF was loaded into HA/ALG composite hydrogel (HGF-HA/ALG) and its in vitro release profile was evaluated. In addition, HGF-HA/ALG was injected into the VFs of rabbits immediately after direct injury and HGF or PBS was injected in the same manner into control groups. Macroscopic features were observed by endoscopy at 3 months post-injury. Functional analyses including mucosal waves of VFs and viscoelastic properties were performed by kymography following high-speed digital imaging and rheometer. Histopathological and immunohistochemical evaluations were also conducted on VFs.

RESULTS

HGF release from HGF-HA/ALG was sustained for up to 3 weeks. Rabbits treated with HGF-HA/ALG showed improved mucosal vibrations and VF viscoelastic properties as compared with the PBS and HGF controls. Histopathological staining revealed HGF-HA/ALG treated VFs showed less fibrosis than PBS and HGF controls, and immunohistochemical analysis demonstrated amounts of type I collagen and fibronectin were lower in HGF-HA/ALG treated animals than in PBS and HGF controls at 3 months post-injury.

CONCLUSION

HGF containing HA/ALG hydrogel enhanced healing in our rabbit model of VF injury.