Colorimetric detection of cholesterol based on enzyme modified gold nanoparticles

Research progress of fluorescent composites based on cyclodextrins: Preparation strategies, fluorescence properties and applications in sensing and bioimaging

Fluorescence analysis has been regarded as one of the commonly used analytical methods because of its advantages of simple operation, fast response, low cost and high sensitivity. So far, various fluorescent probes, with noble metal nanoclusters, quantum dots, organic dyes and metal organic frameworks as representatives, have been widely reported. However, single fluorescent probe often suffers from some deficiencies, such as low quantum yield, poor chemical stability, low water solubility and toxicity. To overcome these disadvantages, the introduction of cyclodextrins into fluorescent probes has become a fascinating approach. This review (with 218 references) systematically covers the research progress of fluorescent composites based on cyclodextrins in recent years. Preparation strategies, fluorescence properties, response mechanisms and applications in sensing (ions, organic pollutants, bio-related molecules, temperature, pH) and bioimaging of fluorescent composites based on cyclodextrins are summarized in detail. Finally, the current challenges and future perspectives of these composites in relative research fields are discussed.

A detection system for serum cholesterol based on the fluorescence color detection of beta-cyclodextrin-capped gold nanoclusters

Cholesterol is one of the major markers for cardiovascular diseases. Herein, a portable cholesterol measurement system based on fluorescence color detection was constructed by combining the high sensitivity of fluorescence analysis with the ease of color sensing to determine low levels of serum cholesterol. Cyclodextrin capping gold nanoclusters with blue-green emission were used as fluorescent probes because cholesterol exposure induced fluorescence enhancement of the probe due to the host-guest inclusion interaction between cholesterol and the cavity of cyclodextrin. The integrated sensing system consisted of modules including a microprocessor, a power supply, an LED light with a constant current source, an RGB color sensor, a display, and a darkroom. All the modules except the display screen were placed in a 3D printing darkroom to avoid interference from ambient light. An RGB color sensor TCS230 was applied to capture the RGB signals of the fluorescent color of the probe solution before and after cholesterol addition. Then the obtained RGB signals were converted into the signals in Hue, Saturation, and Value (HSV) color space with a central control chip STM32F407. The Hue value of the fluorescent color of the solution can discriminate the concentration change of cholesterol. Experimental results demonstrate that the system responds linearly to cholesterol in the concentration range of 20.00 ∼ 150.00 μmol·L-1 with a detection limit of 16.07 μmol·L-1 (3σ, n = 3). The detection of the system has good consistency and accuracy compared with the standard instrument, showing potential for the detection of low levels of serum cholesterol.

A comprehensive review of cancer therapies mediated by conjugated gold nanoparticles with nucleic acid

Nucleic acids provide a promising therapeutic platform by targeting various cell signaling pathways involved in cancer and genetic disorders. However, maintaining optimal stability during delivery limits their utility. Nucleic acid delivery vehicles are generally categorized into biological and synthetic carriers. Regardless of the efficiency of biological vectors, such as viral vectors, issues related to their immunogenicity and carcinogenesis are very important and vital for clinical applications. On the other hand, synthetic vectors such as lipids or polymers, have been widely used for nucleic acid delivery. Despite their transfection efficiency, low storage stability, targeting inefficiency, and tracking limitations are among the limitations of the clinical application of these vectors. In the past decades, gold nanoparticles with unique properties have been shown to be highly efficient mineral vectors for overcoming these obstacles. In this review, we focus on gold nanoparticle-nucleic acid combinations and highlight their use in the treatment of various types of cancers. Furthermore, by stating the biological applications of these structures, we will discuss their clinical applications.

A General Review of Methodologies Used in the Determination of Cholesterol (C27H46O) Levels in Foods

Cholesterol (C27H46O) is a lipid-derived substance found in lipoproteins and cell membranes. It is also one of the main sources for the production of bile acids, vitamin D, and steroid hormones. Today, foods are evaluated by consumers not only according to their taste and nutritional content but also according to their effects on consumer health. For example, many consumers choose foods according to their cholesterol level. The cholesterol in the food can directly affect the blood cholesterol level when consumed, which can lead to cardiovascular diseases. High levels of cholesterol can lead to diet-related human diseases such as cardiac arrest, paralysis, type II diabetes, and cerebral hemorrhage. In societies with high living standards, interest in and consumption of foods that lower or have low cholesterol levels have increased recently. Accordingly, efforts to increase the variety of foods with reduced cholesterol levels are on the rise. This has indirectly led to the accurate measurement of cholesterol levels in blood and food being of great importance. Classical chemical, enzymatic, colorimetric, polarographic, chromatographic, and spectrophotometric methods; enzymatic, nonenzymatic, and electrochemical sensors; and biosensors are used for the determination of cholesterol in foods. The purpose of this review is to reveal and explore current and future trends in cholesterol detection methods in foods. This review will summarize the most appropriate and standard methods for measuring cholesterol in biological components and foods.

Fe-Ni dual-single atoms nanozyme with high peroxidase-like activity for sensitive colorimetric and fluorometric dual-mode detection of cholesterol

Cholesterol is widely existed in nerve myelin sheath and various membrane structures, whose abnormal level would deteriorate human cells or even cause diseases. Herein, Fe-Ni dual-single-atom nanozyme was efficiently incorporated into N-doped carbon nanosheets (FeNi DSAs/N-CSs) by a simple calcination method. Its nanozyme activity and catalytic mechanism were investigated in details. The FeNi DSAs/N-CSs nanozyme showed superior peroxidase-like property, which was applied for the dual-mode determination of hydrogen peroxide (H2O2) and cholesterol. The colorimetric/fluorometric assays of H2O2 displayed the linear ranges of 1-50 mM and 5-40 mM with low limits of detection of 0.45 mM and 3.33 mM, respectively. In parallel, there exhibited the linear ranges of 0.5-5.0 mM and 0.25-5.0 mM for the colorimetric/fluorometric analysis of cholesterol, coupled with the limits of detection down to 0.19 mM and 0.044 mM, respectively. This work provided a rapid, cost-effectiveness and simple colorimetric/fluorometric method for sensitive dual-mode detection of cholesterol in human serum samples.

Label-free and selective cholesterol detection based on multilayer functional structure coated fiber fabry-perot interferometer probe

A reflective fiber-optic Fabry-Perot cavity probe sensor is proposed to selectively measure cholesterol concentration by insert single mode fiber into ceramic tube and immobilize epoxy resin (ER)/graphene oxide (GO)/beta-cyclodextrin (β-CD) multi-layer film onto end face of ceramic tube. EDC/NHS activated GO is selected to form chemical binding with β-CD, and β-CD is the sensitive materials to bind with cholesterol molecules. With multi-layer film assisted, the sensitivity of sensor to cholesterol concentration can reach 3.92 nm/mM and the limit of detection reaches 3.48 μ M. In addition, 4 mM hemoglobin, glucose and ascorbic acid are doped into a set cholesterol sample and verified the highly selectivity of sensing cholesterol. Furthermore, the reproducibility was proved by measure the spectrum of four sensors with same fabrication process, and the reusability was also proved by repeated measurements. Overall, the sensor features with high mechanical strength, ease of fabrication, real-time monitoring, low cost and ease for measurement that given by probe structure. Therefore, the sensor provides a remarkable analytical platform for biosensing applications.

Self-Assembled Plasmonic Nanojunctions Mediated by Host-Guest Interaction for Ultrasensitive Dual-Mode Detection of Cholesterol

Herein, a fluorescence and surface-enhanced Raman spectroscopy dual-mode system was designed for cholesterol detection based on self-assembled plasmonic nanojunctions mediated by the competition of rhodamine 6G (R6G) and cholesterol with β-cyclodextrin modified on gold nanoparticles (HS-β-CD@Au). The fluorescence of R6G was quenched by HS-β-CD@Au due to the fluorescence resonance energy transfer effect. When cholesterol was introduced as the competitive guest, R6G in the cavities of HS-β-CD@Au was displaced to recover its fluorescence. Moreover, two of HS-β-CD@Au can be linked by one cholesterol to form a more stable 2:1 complex, and then, plasmonic nanojunctions were generated, which resulted in the increasing SERS signal of R6G. In addition, fluorescence and SERS intensity of R6G increased linearly with the increase in the cholesterol concentrations with the limits of detection of 95 and 74 nM, respectively. Furthermore, the dual-mode strategy can realize the reliable and sensitive detection of cholesterol in the serum with good accuracy, and two sets of data can mutually validate each other, which demonstrated great application prospects in the surveillance of diseases related with cholesterol.

Ratiometric Fluorescence Probe of Vesicle-like Carbon Dots and Gold Clusters for Quantitation of Cholesterol

We report a facile method for the preparation of vesicle-like carbon dots (VCDs) via dry-heating of surfactant solutions. Like most reported CDs, the VCDs possess interesting fluorescence properties. Entrapment of enzymes and gold nanoclusters (AuNCs) inside the VCDs allows for the development of fluorescent probes for the quantitation of various substrates, with the advantages of high sensitivity and selectivity. The AuNCs act as a probe, and the VCDs as an internal standard confine the AuNCs, enzyme, and analyte to provide high local concentrations to enhance the assay sensitivity. In this study, we employed cholesterol oxidase (ChOX) as a model enzyme for the quantitation of cholesterol. The as-formed hydrogen peroxide through the enzyme reaction inside the VCDs causes fluorescence quenching of AuNCs (excitation/emission wavelengths of 320/670 nm), but not that of the VCDs (excitation/emission wavelengths of 320/400 nm). To improve the sensitivity and linearity, the fluorescence ratios of AuNCs/VCDs are plotted against analyte concentration. The present ratiometric fluorescent method allows for the detection of hydrogen peroxide over the concentration range of 1–100 μM, with a detection limit of 0.673 μM, and cholesterol concentrations ranging from 5 to 100 μM, with a detection limit of 2.8 μM. The practicality of this fluorescent method has been further validated by evaluating cholesterol levels in human serum samples with sufficient accuracy and recovery, revealing its great prospective in diagnosis and biomedical applications.

Exploration of nanozymes in viral diagnosis and therapy

Nanozymes are nanomaterials with similar catalytic activities to natural enzymes. Compared with natural enzymes, they have numerous advantages, including higher physiochemical stability, versatility, and suitability for mass production. In the past decade, the synthesis of nanozymes and their catalytic mechanisms have advanced beyond the simple replacement of natural enzymes, allowing for fascinating applications in various fields such as biosensing and disease treatment. In particular, the exploration of nanozymes as powerful toolkits in diagnostic viral testing and antiviral therapy has attracted growing attention. It can address the great challenges faced by current natural enzyme-based viral testing technologies, such as high cost and storage difficulties. Therefore, nanozyme can provide a novel nanozyme-based antiviral therapeutic regime with broader availability and generalizability that are keys to fighting a pandemic such as COVID-19. Herein, we provide a timely review of the state-of-the-art nanozymes regarding their catalytic activities, as well as a focused discussion on recent research into the use of nanozymes in viral testing and therapy. The remaining challenges and future perspectives will also be outlined. Ultimately, this review will inform readers of the current knowledge of nanozymes and inspire more innovative studies to push forward the frontier of this field.

Freshness monitoring of raw fish by detecting biogenic amines using a gold nanoparticle-based colorimetric sensor array

We herein report the quantitative detection of biogenic amines using a gold nanoparticle-based colorimetric chemosensor array for food analysis. The gold nanoparticles are functionalized with carboxylate derivatives, which capture target amines through hydrogen bonds and electrostatic interactions. The simultaneous discrimination of 10 amine derivatives was achieved by a linear discriminant analysis with a 100% correct classification based on the multi-colorimetric response pattern of structural differences. Furthermore, a real sample analysis for raw fish (i.e., tuna) demonstrated highly accurate determination of histamine concentrations by a support vector machine, the result of which was matched with high-performance liquid chromatography. Most importantly, the chemosensor array succeeded in detecting the time-dependent concentration change of histamine in the raw fish, meaning that the decomposition of the fish could be monitored by the colorimetric changes. Hence, the proposed chemosensor array combined with pattern recognition techniques can be a user-friendly analytical method for food freshness monitoring.

A gold nanoparticle-based chemosensor array functionalized with carboxylate derivatives performed freshness monitoring of amines in a fish sample.

Colorimetric, Naked-Eye Detection of Lysozyme in Human Urine with Gold Nanoparticles

The stabilizing effect of lysozymes to salt addition over a gold colloid are exploited in order to detect lysozymes in human urine samples. The present research is aimed at the development of a fast, naked-eye detection test for urinary lysozymuria, in which direct comparison with a colorimetric reference, allows for the immediate determination of positive/negative cases. CIEL*a*b* parameters were obtained from sample absorbance measurements, and their color difference with respect to a fixed reference point was measured by calculating the ΔE76 parameter, which is a measure of how well the colors can be distinguished by an untrained observer. Results show that a simple and quick test can reliably, in less than 15 min, give a positive colorimetric response in the naked eye for concentrations of a urinary lysozyme over 57.2 µg/mL. This concentration is well within the limits of that observed for leukemia-associated lysozymurias, among other disorders.

Microfluidic nanopaper based analytical device for colorimetric and naked eye determination of cholesterol using the color change of triangular silver nanoprisms

A microfluidic nanopaper-based analytical device (μNPAD) has been prepared for the determination of cholesterol by using triangular silver nanoprisms (T-AgNPrs).

Au@polydopamine nanoparticles/tocilizumab composite as efficient scavengers of oxygen free radicals for improving the treatment of rheumatoid arthritis

Rheumatoid arthritis (RA) is the most common chronic autoimmune disorder associated with high-cost, side effects, and low therapeutic effects. To improve the treatment of RA, we originally developed a novel anti-RA Au@polydopamine nanoparticles (PDANPs)/TCZ composite using PDANPs as the binding sites of gold nanoparticles (AuNPs) and the drug carries of tocilizumab (TCZ) through a facile and environmentally-friend method, aiming to effectively scavenge oxygen free radicals (OFR) and inhibit the formation of related inflammatory factors. Characterizations showed that AuNPs with the size of 11.4 ± 2.9 nm randomly distributed onto the surface of PDANPs (145.8 ± 31.9 nm), meanwhile TCZ was chemically cross-linked to PDANPs through Schiff base linkage. The synthesized composite had good biocompatibility that can promote the proliferation and growth of chondrocytes and fibroblasts. More importantly, Au@PDANPs/TCZ composite showed more excellent abilities to scavenge OFR and inhibit the related inflammatory factors in vitro and in vivo than that of AuNPs and PDANPs owing to the synergistic scavenging effect, ensuring its best therapeutic effect in RA therapy. This new composite will have application potential in the treatment of RA related disease.

Tailoring thermo-optical properties of eosin B dye using surfactant-free gold-silver alloy nanoparticles

Surfactant free gold, silver and gold-silver alloy nanoparticles were synthesized using a laser mediated method for localized surface plasmon resonance tuning. The effect of these nanoparticles on the thermo-optical properties of eosin B dye was investigated. Dual beam mode matched thermal lens method was implemented to evaluate the thermal diffusivity of the eosin B with gold, silver and gold-silver alloy nanoparticles. Concentration and composition dependant changes in thermo-optical properties of the eosin B-nanoparticle systems were quantified. As the concentration of nanoparticles incorporated into the dye solution increased, the thermal diffusivity and fluorescence emission intensity of the samples were found to be decreased. At the same time an enhancement of the thermal lens signal was observed with the introduction of nanoparticles into the system. Further enhancement in signal and reduction in thermal diffusivity and fluorescence intensity can be obtained with fine tuning of surface plasmon resonance wavelength by gold, silver and gold-silver alloy nanoparticles.

ZnO nanowire-based fluorometric enzymatic assays for lactate and cholesterol

A rapid fluorometric method is described for the determination of lactate and cholesterol by using ZnO nanowires (ZnO NWs). The assay is based on the detection of the hydrogen peroxide generated during the enzymatic reactions of the oxidation of lactate or cholesterol. Taking advantage of the electrostatic interactions between the enzymes and the ZnO NWs, two bioconjugates were prepared by mixing the nanomaterial and the enzymes, viz. lactate oxidase (LOx) or cholesterol oxidase (ChOx). The enzymatically generated hydrogen peroxide quenches the fluorescence of the ZnO NWs, which have emission peaks at 384 nm and at 520 nm under 330 nm photoexcitation. H₂O₂ quenches the 520 nm band more strongly. Response is linear up to 1.9 μM lactate concentration, and up to 1.1 μM cholesterol concentration. Relative standard deviation was found to be 5%. The detection limits for lactate and cholesterol are 0.54 and 0.24 μM, respectively. Graphical abstractSchematic representation of fluorescence assay based on ZnO nanowires photoluminiscence for lactate and colesterol detection.

Functionalized gold nanoparticles for sample preparation: A review

Sample preparation is a crucial step for the reliable and accurate analysis of both small molecule and biopolymers which often involves processes such as isolation, pre-concentration, removal of interferences (purification), and pre-processing (e.g., enzymatic digestion) of targets from a complex matrix. Gold nanoparticle (GNP)-assisted sample preparation and pre-concentration has been extensively applied in many analytical procedures in recent years due to the favorable and unique properties of GNPs such as size-controlled synthesis, large surface-to-volume ratio, surface inertness, straightforward surface modification, easy separation requiring minimal manipulation of samples. This review article primarily focuses on applications of GNPs in sample preparation, in particular for bioaffinity capture and biocatalysis. In addition, their most common synthesis, surface modification and characterization methods are briefly summarized. Proper surface modification for GNPs designed in accordance to their target application directly influence their functionalities, e.g., extraction efficiencies, and catalytic efficiencies. Characterization of GNPs after synthesis and modification is worthwhile for monitoring and controlling the fabrication process to ensure proper quality and functionality. Parameters such as morphology, colloidal stability, and physical/chemical properties can be assessed by methods such as surface plasmon resonance, dynamic light scattering, ζ-potential determinations, transmission electron microscopy, Taylor dispersion analysis, and resonant mass measurement, among others. The accurate determination of the surface coverage appears to be also mandatory for the quality control of functionality of the nanoparticles. Some promising applications of (functionalized) GNPs for bioanalysis and sample preparation are described herein.

LSPR-based cholesterol biosensor using a tapered optical fiber structure

Accurate cholesterol level measurement plays an important role in the diagnosis of severe diseases such as cardiovascular diseases, hypertension, anemia, myxedemia, hyperthyroidism, coronary artery illness. Traditionally, electrochemical sensors have been employed to detect the cholesterol level. However, these sensors have limitations in terms of sensitivity and selectivity. In this paper, a localized surface plasmon resonance (LSPR) -based biosensor is demonstrated that accurately detects and measures the concentration of cholesterol. In the present study, a tapered optical fiber-based sensor probe is developed using gold nanoparticles (AuNPs) and cholesterol oxidase (ChOx) to increase the sensitivity and selectivity of the sensor. Synthesized AuNPs were characterized by UV-visible spectrophotometer, transmission electron microscope (TEM), and energy dispersive X-ray spectroscopy (EDS). Further, coating of AuNPs over fiber was confirmed by scanning electron microscope (SEM). The developed sensor demonstrates for a clinically important cholesterol range of 0 to 10 mM, and the limit of detection is found to be 53.1 nM.

LSPR-based cholesterol biosensor using a tapered optical fiber structure

Accurate cholesterol level measurement plays an important role in the diagnosis of severe diseases such as cardiovascular diseases, hypertension, anemia, myxedemia, hyperthyroidism, coronary artery illness. Traditionally, electrochemical sensors have been employed to detect the cholesterol level. However, these sensors have limitations in terms of sensitivity and selectivity. In this paper, a localized surface plasmon resonance (LSPR) -based biosensor is demonstrated that accurately detects and measures the concentration of cholesterol. In the present study, a tapered optical fiber-based sensor probe is developed using gold nanoparticles (AuNPs) and cholesterol oxidase (ChOx) to increase the sensitivity and selectivity of the sensor. Synthesized AuNPs were characterized by UV-visible spectrophotometer, transmission electron microscope (TEM), and energy dispersive X-ray spectroscopy (EDS). Further, coating of AuNPs over fiber was confirmed by scanning electron microscope (SEM). The developed sensor demonstrates for a clinically important cholesterol range of 0 to 10 mM, and the limit of detection is found to be 53.1 nM.

Surface plasmon resonance of gold nanoparticles as a colorimetric sensor for indirect detection of Cefixime

This study reports a colorimetric sensor with excellent sensitivity to detect Cefixime base on gold nanoparticles. Cefixime is an antibiotic which has a wide range of applications in medicine. Cefixime did not change the surface plasmon resonance bond in gold nanoparticles solution; therefore, there was no change in the color solution of gold nanoparticles. The presence of Alizarin Red S in the system was necessary for the degradation of Cefixime, resulting in the aggregation of gold nanoparticles and a color change from red to blue. As a result of aggregation, the localized surface plasmon resonance band of gold nanoparticles decreased to around 525 nm and a new red-shifted band at 640 nm appeared which increases gradually as the function of Cefixime concentration. A unique detection limit (2.5 ng mL^-1) was achieved for Cefixime in comparison with other colorimetric methods. Relative standard deviations (RSD) for 40.0 and 140.0 ng mL^-1 of Cefixime were 2.6 and 1.8% for intra-day respectively. A possible mechanism was discussed for the surface plasmon resonance changes of AuNPs in the presence of Cefixime. The proposed method was applied to detect Cefixime in pharmaceutical samples with satisfactory results. This system is low-cost and is highly sensitive with no need for any preconcentration steps or using any expensive or sophisticated instrumentation.

Synthesis, spectral characterization, molecular modeling, antibacterial and antioxidant activities and stability study of binuclear Pd(II) and Ru(III) complexes with novel bis-[1-(2-[(2-hydroxynaphthalen-1-yl)methylidene]amino}ethyl)-1-ethyl-3-phenylthiourea] ligand: Application to detection of cholesterol

A novel bis-[1-(2-[(2-hydroxynaphthalen-1-yl) methylidene]amino}ethyl)-1-ethyl-3-phenylthiourea] Schiff base (L) and its binuclear palladium and ruthenium complexes have been prepared and characterized by ESI-MS, elemental analysis, NMR (¹H NMR, ¹³C NMR, COSY, NEOSY and HSQC), FT-IR, ATR, UV-Visible spectra, TGA measurements, conductivity and cyclic voltammetry. The experimental results and the molecular parameters calculated using DFT method revealed a square planar geometry around Pd and octahedral geometry around ruthenium metal. The antibacterial activity of the ligand L and its complexes was evaluated against different human bacteria. In addition, the formation constants of the synthesized Schiff base-metal complexes and the systems formed with these chelates and cholesterol were estimated using spectrophotometric technique. The detection of cholesterol using novel Pd and Ru Schiff base complexes was studied using fluorometric method, and the measurements showed that the sensitive fluorometric response towards cholesterol analysis was determined using palladium complex. The limit of detection (LOD) of cholesterol calculated using this complex (4.6 μM) is lower (better) than LOD found using ruthenium complex (19.1 μM) and different compounds previously published around linear range of 0-5 mM.

Bifunctional magnetic nanoparticles for efficient cholesterol detection and elimination via host-guest chemistry in real samples

Cholesterol is an essential compound for maintaining cellular homeostasis and human healthy. Sensitive detection of cholesterol and efficient elimination of excess cholesterol have become the essential manipulations in clinical diagnosis and health management. To date, it is still quite challenging that cholesterol detection and elimination tasks are carried out simultaneously. In this study, bifunctional magnetic nanoparticles (Fe₃O₄@PDA-PBA-CD) are designed and fabricated to overcome this difficulty. Taking advantages of competitive host-guest interaction and magnetic separation, highly efficient, reusable and simultaneous cholesterol detection and elimination can be achieved. The limit of detection is determined to be 4.3 nM, which is comparable or even lower than existing methods. The distinguished performance may attribute to the high loading efficiency and magnetic enrichment of nanoparticles. Besides, this efficient strategy is resistant to interfering substances, thus realizing sensitive cholesterol detection in real sample. Simultaneously, the bifunctional magnetic nanoparticles also have up to 95% cholesterol elimination efficiency, which is higher than previous reported methods. Furthermore, the nanoparticles are turned out to be reusable within 5 times without noticeable loss in cholesterol elimination efficiency. Therefore, the bifunctional magnetic nanoparticles fabricated here could hold great potential for simultaneous cholesterol detection and elimination in practical applications.

Penicillin Detection by Tobacco Mosaic Virus-Assisted Colorimetric Biosensors

The presentation of enzymes on viral scaffolds has beneficial effects such as an increased enzyme loading and a prolonged reusability in comparison to conventional immobilization platforms. Here, we used modified tobacco mosaic virus (TMV) nanorods as enzyme carriers in penicillin G detection for the first time. Penicillinase enzymes were conjugated with streptavidin and coupled to TMV rods by use of a bifunctional biotin-linker. Penicillinase-decorated TMV particles were characterized extensively in halochromic dye-based biosensing. Acidometric analyte detection was performed with bromcresol purple as pH indicator and spectrophotometry. The TMV-assisted sensors exhibited increased enzyme loading and strongly improved reusability, and higher analysis rates compared to layouts without viral adapters. They extended the half-life of the sensors from 4 - 6 days to 5 weeks and thus allowed an at least 8-fold longer use of the sensors. Using a commercial budget-priced penicillinase preparation, a detection limit of 100 µM penicillin was obtained. Initial experiments also indicate that the system may be transferred to label-free detection layouts.