Bioremediation of acid mine drainage using algae strains: A review

Microbial strategies for copper pollution remediation: Mechanistic insights and recent advances

Environmental contamination is aninsistent concern affecting human health and the ecosystem. Wastewater, containing heavy metals from industrial activities, significantly contributes to escalating water pollution. These metals can bioaccumulate in food chains, posing health risks even at low concentrations. Copper (Cu), an essential micronutrient, becomes toxic at high levels. Activities like mining and fungicide use have led to Copper contamination in soil, water, and sediment beyond safe levels. Copper widely used in industries, demands restraint of heavy metal ion release into wastewater for ecosystem ultrafiltration, membrane filtration, nanofiltration, and reverse osmosis, combat heavy metal pollution, with emphasis on copper.Physical and chemical approaches are efficient, large-scale feasibility may have drawbackssuch as they are costly, result in the production of sludge. In contrast, bioremediation, microbial intervention offers eco-friendly solutions for copper-contaminated soil. Bacteria and fungi facilitate these bioremediation avenues as cost-effective alternatives. This review article emphasizes on physical, chemical, and biological methods for removal of copper from the wastewater as well asdetailing microorganism's mechanisms to mobilize or immobilize copper in wastewater and soil.

Application of biological soil crusts for efficient cadmium removal from acidic mine wastewater

Utilizing an acid-resistant biological soil crust (BSC) species that we discovered, we developed a device capable of efficiently removing cadmium (Cd) from mine wastewater with varying levels of acidity. Our research has demonstrated that this particular BSC species adapts to acidic environments by regulating the balance of fatty acids and acid-resistant enzymes. At a Cd concentration of 5 mg/L, the BSC grew well. When the initial Cd concentration was 2 mg/L, and the flow rate was set at 1 mL/min (at pH levels of 3, 4, and 5), BSC had a high removal rate of Cd, and the removal rate increased with the increase of pH (from 90% to 97%). Chemisorption is the primary removal mechanism in the initial stage, where the functional groups and minerals on the surface of the BSC play a significant role. In addition, BSC also adapts to Cd stress by changing bacterial community structure. It was discovered through infrared spectroscopy and two-dimensional correlation analysis that hydrophilic groups, specifically phosphate and carboxyl groups, exhibited the highest reactivity during the Cd binding process. Protein secondary structure analysis confirmed that as the pH increased, the adsorption capacity of the BSC increased; making biofilm formation easier. This study presents a novel approach for the treatment of acidic wastewater.

Microbial communities from weathered outcrops of a sulfide-rich ultramafic intrusion, and implications for mine waste management

The Duluth Complex (DC) contains sulfide-rich magmatic intrusions that represent one of the largest known economic deposits of copper, nickel, and platinum group elements. Previous work showed that microbial communities associated with experimentally-weathered DC waste rock and tailings were dominated by uncultivated taxa and organisms not typically associated with mine waste. However, those experiments were designed for kinetic testing and do not necessarily represent the conditions expected for long-term environmental weathering. We used 16S rRNA gene methods to characterize the microbial communities present on the surfaces of naturally-weathered and historically disturbed outcrops of DC material. Rock surfaces were dominated by diverse uncultured Ktedonobacteria, Acetobacteria, and Actinobacteria, with abundant algae and other phototrophs. These communities were distinct from microbial assemblages from experimentally-weathered DC rocks, suggesting different energy and nutrient resources in environmental samples. Sulfide mineral incubations performed with and without algae showed that photosynthetic microorganisms could have an inhibitory effect on autotrophic populations, resulting in slightly lower sulfate release and differences in dominant microorganisms. The microbial assemblages from these weathered outcrops show how communities develop during weathering of sulfide-rich DC rocks and represent baseline data that could evaluate the effectiveness of future reclamation of waste produced by large-scale mining operations.

How Synthesis of Algal Nanoparticles Affects Cancer Therapy? - A Complete Review of the Literature

The necessity to engineer sustainable nanomaterials for the environment and human health has recently increased. Due to their abundance, fast growth, easy cultivation, biocompatibility and richness of secondary metabolites, algae are valuable biological source for the green synthesis of nanoparticles (NPs). The aim of this review is to demonstrate the feasibility of using algal-based NPs for cancer treatment. Blue-green, brown, red and green micro- and macro-algae are the most commonly participating algae in the green synthesis of NPs. In this process, many algal bioactive compounds, such as proteins, carbohydrates, lipids, alkaloids, flavonoids and phenols, can catalyze the reduction of metal ions to NPs. In addition, many driving factors, including pH, temperature, duration, static conditions and substrate concentration, are involved to facilitate the green synthesis of algal-based NPs. Here, the biosynthesis, mechanisms and applications of algal-synthesized NPs in cancer therapy have been critically discussed. We also reviewed the effective role of algal synthesized NPs as anticancer treatment against human breast, colon and lung cancers and carcinoma.

Phycoremediation of heavy metals and production of biofuel from generated algal biomass: a review

Due to human activity and natural processes, heavy metal contamination frequently affects the earth's water resources. The pollution can be categorized as resistant and persistent since it poses a significant risk to terrestrial and marine biological systems and human health. Because of this, several appeals and demands have been made worldwide to try and clean up these contaminants. Through bioremediation, algal cells are frequently employed to adsorb and eliminate heavy metals from the environment. Bioremediation is seen as a desirable strategy with few adverse effects and low cost. Activities and procedures for bioremediation involving algal cells depend on various environmental factors, including salinity, pH, temperature, the concentration of heavy metals, the amount of alga biomass, and food availability. Additionally, the effectiveness of removing heavy metals from the environment by assessing how environmental circumstances affect algal activities. The main issues discussed are (1) heavy metal pollution of water bodies, the role of algal cells in heavy metal removal, the methods by which algae cells take up and store heavy metals, and the process of turning the algae biomass produced into biofuel. (2) To overcome the environmental factors and improve heavy metals bioremediation, many strategies are applied, such as immobilizing the cells, consortium culture, and using dry mass rather than living cells. (3) The processes for converting produced algal biomass into biofuels like biodiesel and biomethanol. The present study discusses the life cycle assessment and the limitations of biofuel products from algae biomass.

The interplay between microalgae and toxic metal(loid)s: mechanisms and implications in AMD phycoremediation coupled with Fe/Mn mineralization

Acid mine drainage (AMD) is low-pH with high concentration of sulfates and toxic metal(loid)s (e.g. As, Cd, Pb, Cu, Zn), thereby posing a global environmental problem. For decades, microalgae have been used to remediate metal(loid)s in AMD, as they have various adaptive mechanisms for tolerating extreme environmental stress. Their main phycoremediation mechanisms are biosorption, bioaccumulation, coupling with sulfate-reducing bacteria, alkalization, biotransformation, and Fe/Mn mineral formation. This review summarizes how microalgae cope with metal(loid) stress and their specific mechanisms of phycoremediation in AMD. Based on the universal physiological characteristics of microalgae and the properties of their secretions, several Fe/Mn mineralization mechanisms induced by photosynthesis, free radicals, microalgal-bacterial reciprocity, and algal organic matter are proposed. Notably, microalgae can also reduce Fe(III) and inhibit mineralization, which is environmentally unfavorable. Therefore, the comprehensive environmental effects of microalgal co-occurring and cyclical opposing processes must be carefully considered. Using chemical and biological perspectives, this review innovatively proposes several specific processes and mechanisms of Fe/Mn mineralization that are mediated by microalgae, providing a theoretical basis for the geochemistry of metal(loid)s and natural attenuation of pollutants in AMD.

Acidophilic microorganisms in remediation of contaminants present in extremely acidic conditions

Acidophiles are a group of microorganisms that thrive in acidic environments where pH level is far below the neutral value 7.0. They belong to a larger family called extremophiles, which is a group that thrives in various extreme environmental conditions which are normally inhospitable to other organisms. Several human activities such as mining, construction and other industrial processes release highly acidic effluents and wastes into the environment. Those acidic wastes and wastewaters contain different types of pollutants such as heavy metals, radioactive, and organic, whose have adverse effects on human being as well as on other living organisms. To protect the whole ecosystem, those pollutants containing effluents or wastes must be clean properly before releasing into environment. Physicochemical cleanup processes under extremely acidic conditions are not always successful due to high cost and release of toxic byproducts. While in case of biological methods, except acidophiles, no other microorganisms cannot survive in highly acidic conditions. Therefore, acidophiles can be a good choice for remediation of different types of contaminants present in acidic conditions. In this review article, various roles of acidophilic microorganisms responsible for removing heavy metals and radioactive pollutants from acidic environments were discussed. Bioremediation of various acidic organic pollutants by using acidophiles was also studied. Overall, this review could be helpful to extend our knowledge as well as to do further relevant novel studies in the field of acidic pollutants remediation by applying acidophilic microorganisms.

Immobilization of metal(loid)s from acid mine drainage by biological soil crusts through biomineralization

Acid mine drainage is harmful to the environment. Bioremediation based on biological soil crusts (BSCs) can be used as a new method to alleviate metal pollution in acid mine drainage. In this study, we found that BSCs can survive in a strongly acidic environment (pH = 3.28) and have a high metal(loid)s accumulation ability. The algae of genera Fragilaria, Klebsormidium, Cymbella, Melosira, Microcystacea, and Planctonema a're the main components of BSCs. These organisms in the BSCs regulated fatty acids and produced acid-resistant enzymes. The bioconcentration factors for As, Cd, Pb, Zn, and Cu were as high as 16,000, 200, 50, 26, and 400, respectively. The concentration of As and Cd in acid mine drainage decreased from 7.1 μg and 350 μg/L to 1.9 μg and 110 μg/L, respectively. In total, 56% of As, 73% of Cd, 88% of Pb, 85% of Zn, and 92% of Cu were present in BSCs as residual or mineral-bound forms. The XRD results (e.g., quarartz and phyllosilicates), SEM results (e.g., phylosilicates and diatom shells) and correlation results show that these metal(loid)s are immobilized by Cymbella (diatoms) during the deposition of silica in the acidic environment. Furthermore, adsorption and co-precipitation are other ways that metal(loid)s could have been bound. These findings provide new insights into the removal of metals (loid) in acidic water.

Fungal assisted bio-treatment of environmental pollutants with comprehensive emphasis on noxious heavy metals: Recent updates

In the present time of speedy developments and industrialization, heavy metals are being uncovered in aquatic environment and soil via refining, electroplating, processing, mining, metallurgical activities, dyeing and other several metallic and metal based industrial and synthetic activities. Heavy metals like lead (Pb), mercury (Hg), cadmium (Cd), arsenic (As), Zinc (Zn), Cobalt (Co), Iron (Fe), and many other are considered as seriously noxious and toxic for the aquatic environment, human, and other aquatic lives and have damaging influences. Such heavy metals, which are very tough to be degraded, can be managed by reducing their potential through various processes like removal, precipitation, oxidation-reduction, bio-sorption, recovery, bioaccumulation, bio-mineralization etc. Microbes are known as talented bio-agents for the heavy metals detoxification process and fungi are one of the cherished bio-sources that show noteworthy aptitude of heavy metal sorption and metal tolerance. Thus, the main objective of the authors was to come with a comprehensive review having methodological insights on the novel and recent results in the field of mycoremediation of heavy metals. This review significantly assesses the potential talent of fungi in heavy metal detoxification and thus, in environmental restoration. Many reported works, methodologies and mechanistic sights have been evaluated to explore the fungal-assisted heavy metal remediation. Herein, a compact and effectual discussion on the recent mycoremediation studies of organic pollutants like dyes, petroleum, pesticides, insecticides, herbicides, and pharmaceutical wastes have also been presented.

Algae, biochar and bacteria for acid mine drainage (AMD) remediation: A review

Acid mine drainage (AMD) is a global issue and causes harmful environmental impacts. AMD has high acidity and contains a high concentration of heavy metals and metalloids, making it toxic to plants, animals, and humans. Traditional treatments for AMD have been widely used for a long time. Nevertheless, some limitations, such as low efficacy and secondary contamination, have led them to be replaced by other methods such as bio-based AMD treatments. This study reviewed three bio-based treatment methods using algae, biochar, and bacteria that can be used separately and potentially in combination for effective and sustainable AMD treatment to identify the removal mechanisms and essential parameters affecting AMD treatment. All bio-based methods, when applied as a single process and in combination (e.g. algae-biochar and algae-bacteria), were identified as effective treatments for AMD. Also, all these bio-based methods were found to be affected by some parameters (e.g. pH, temperature, biomass concentration and initial metal concentration) when removing heavy metals from AMD. However, we did not identify any research focusing on the combination of algae-biochar-bacteria as a consortium for AMD treatment. Therefore, due to the excellent performance in AMD treatment of algae, biochar and bacteria and the potential synergism among them, this review provides new insight and discusses the feasibility of a combination of algae-biochar-bacteria for AMD treatment.

Biotechnology of Microorganisms from Coal Environments: From Environmental Remediation to Energy Production

Simple Summary

Despite the wide perception that coal environments are extreme habitats, they harbor resident microbial communities. Coal-associated habitats, such as coal mine areas/drainages, spoil heaps, and coalbeds, are defined as complex ecosystems with indigenous microbial groups and native microecological networks. Resident microorganisms possess rich functional potentials and profoundly shape a range of biotechnological processes in the coal industry, from production to remediation.

Abstract

It was generally believed that coal sources are not favorable as live-in habitats for microorganisms due to their recalcitrant chemical nature and negligible decomposition. However, accumulating evidence has revealed the presence of diverse microbial groups in coal environments and their significant metabolic role in coal biogeochemical dynamics and ecosystem functioning. The high oxygen content, organic fractions, and lignin-like structures of lower-rank coals may provide effective means for microbial attack, still representing a greatly unexplored frontier in microbiology. Coal degradation/conversion technology by native bacterial and fungal species has great potential in agricultural development, chemical industry production, and environmental rehabilitation. Furthermore, native microalgal species can offer a sustainable energy source and an excellent bioremediation strategy applicable to coal spill/seam waters. Additionally, the measures of the fate of the microbial community would serve as an indicator of restoration progress on post-coal-mining sites. This review puts forward a comprehensive vision of coal biodegradation and bioprocessing by microorganisms native to coal environments for determining their biotechnological potential and possible applications.

Bioaccumulation of metals by algae from acid mine drainage: a case study of Frongoch Mine (UK)

In Frongoch Mine (UK), it is unclear the distribution of metals on indigenous algae and whether these species of algae can accumulate metals. This study aimed to investigate the role of indigenous algae for metal removal from acid mine drainage and understand if metals can be adsorbed on the surface of algae or/and bioaccumulated in algae. A sequential extraction procedure was applied for algae samples collected from acid mine drainage (AMD) water to identify the forms in which metals are found in algae. Concentrations of Fe, Pb, Zn, Cu and Cd were evaluated in the algae and AMD samples were collected in June and October 2019. AMDs samples had a pH value ranging between 3.5 and 6.9 and high concentrations of Zn (351 mg/L) and Pb (4.22 mg/L) that exceeded the water quality standards (Water Framework Directive, 2015). Algae Ulothrix sp. and Oedogonium sp. were the two main species in the Frongoch AMDs. The concentrations of metals in algae ranged from 0.007 to 51 mg/g, and the bioconcentration factor of metals decreased in the following order: Fe >  > Pb >  > Cu > Cd > Zn. It was found that Zn, Cu and Cd were adsorbed onto the surface of and bioaccumulated in the algae, while Pb and Fe were mainly bioaccumulated in the algae. Indigenous algae can be considered as a biogeochemical barrier where metals are accumulating and can be used in bioremediation methods. Also, indigenous algae could be used as a bioindicator to assess water pollution at Frongoch Mine and other similar metal mines.

Attenuation of organics contamination in polymers processing effluent using iron-based sludge: process optimization and oxidation mechanism

The feasibility of using iron extracted from acid mine drainage (AMD) as Fenton's reagent for removal of organics pollutants from polymer and plastics manufacturing effluent was investigated in this study. AMD iron dose, H₂O₂ concentration and pH were evaluated as the treatment factors for their effects on organics oxidation. Optimum treatment conditions were identified using response surface methodological analysis (RSM), and of the ranges of the treatment factors examined, an optimal treatment combination was found to be AMD iron concentration: 40 mg/L and H₂O₂: 500 mg/L at pH 2.2, organics removal efficiency as high as 98% for TOC removal was achieved. The removal efficiency increased with temperature up to 40°C and further temperature increases resulted in lower removal efficiencies. The organics oxidation was characterized well by investigating the kinetic order and the process is following the second-order reaction kinetics. The thermodynamic parameters showed that the oxidation reaction was endothermic and non-spontaneous in nature.

Algal-based system for removal of emerging pollutants from wastewater: A review

The bioremediation of emerging pollutants in wastewater via algal biotechnology has been emerging as a cost-effective and low-energy input technological solution. However, the algal bioremediation technology is still not fully developed at a commercial level. The development of different technologies and new strategies to cater specific needs have been studied. The existence of multiple emerging pollutants and the selection of microalgal species is a major concern. The rate of algal bioremediation is influenced by various factors, including accidental contaminations and operational conditions in the pilot-scale studies. Algal-bioremediation can be combined with existing treatment technologies for efficient removal of emerging pollutants from wastewater. This review mainly focuses on algal-bioremediation systems for wastewater treatment and pollutant removal, the impact of emerging pollutants in the environment, selection of potential microalgal species, mechanisms involved, and challenges in removing emerging pollutants using algal-bioremediation systems.

Algae bioprocess to deal with cosmetic chemical pollutants in natural ecosystems: A comprehensive review

Elevated demand and extensive exploitation of cosmetics in day-to-day life have hiked up its industrial productions worldwide. Organic and inorganic chemicals like parabens, phthalates, sulfates, and so forth are being applied as constituents towards the formulations, which tend to be the mainspring ecological complication due to their enduring nature and accumulation properties in various sections of the ecosystem. These cosmetic chemicals get accrued into the terrestrial and aquatic systems on account of various anthropogenic activities involving agricultural runoff, industrial discharge, and domestic effluents. Recently, the use of microbes for remediating persistent cosmetic chemicals has gained immense interest. Among different forms of the microbial community being applied as an environmental beneficiary, algae play a vital role in both terrestrial and aquatic ecosystems by their biologically beneficial metabolites and molecules, resulting in the biobenign and efficacious consequences. The use of various bacterial, fungal, and higher plant species has been studied intensely for their bioremediation elements. The bioremediating property of the algal cells through biosorption, bioassimilation, biotransformation, and biodegradation has made it favorable for the removal of persistent and toxic pollutants from the environment. However, the research investigation concerned with the bioremediation potential of the algal kingdom is limited. This review summarizes and provides updated and comprehensive insights into the potential remediation capabilities of algal species against ecologically hazardous pollutants concerning cosmetic chemicals.

Microbial Community Diversity Dynamics in Acid Mine Drainage and Acid Mine Drainage-Polluted Soils: Implication on Mining Water Irrigation Agricultural Sustainability

Environmental degradation related to mining-generated acid mine drainage (AMD) is a major global concern, contaminating surface and groundwater sources, including agricultural land. In the last two decades, many developing countries are expanding agricultural productivity in mine-impacted soils to meet food demand for their rapidly growing population. Further, the practice of AMD water (treated or untreated) irrigated agriculture is on the increase, particularly in water-stressed nations around the world. For sustainable agricultural production systems, optimal microbial diversity, and functioning is critical for soil health and plant productivity. Thus, this review presents up-to-date knowledge on the microbial structure and functional dynamics of AMD habitats and AMD-impacted agricultural soils. The long-term effects of AMD water such as soil acidification, heavy metals (HM), iron and sulfate pollution, greatly reduces microbial biomass, richness, and diversity, impairing soil health plant growth and productivity, and impacts food safety negatively. Despite these drawbacks, AMD-impacted habitats are unique ecological niches for novel acidophilic, HM, and sulfate-adapted microbial phylotypes that might be beneficial to optimal plant growth and productivity and bioremediation of polluted agricultural soils. This review has also highlighted the impact active and passive treatment technologies on AMD microbial diversity, further extending the discussion on the interrelated microbial diversity, and beneficial functions such as metal bioremediation, acidity neutralization, symbiotic rhizomicrobiome assembly, and plant growth promotion, sulfates/iron reduction, and biogeochemical N and C recycling under AMD-impacted environment. The significance of sulfur-reducing bacteria (SRB), iron-oxidizing bacteria (FeOB), and plant growth promoting rhizobacteria (PGPRs) as key players in many passive and active systems dedicated to bioremediation and microbe-assisted phytoremediation is also elucidated and discussed. Finally, new perspectives on the need for future studies, integrating meta-omics and process engineering on AMD-impacted microbiomes, key to designing and optimizing of robust active and passive bioremediation of AMD-water before application to agricultural production is proposed.

Natural community of macroalgae from chromium-contaminated site for effective remediation of Cr(VI)-containing leachates

The natural macroalgal community, which developed in the unique and extremely Cr(VI)-polluted aquatic reservoir situated near a historical chromium-waste landfill, was studied in order to recognize the main mechanisms of Cr(VI) detoxification by the algal species. The conducted taxonomic analysis revealed mixed composition of the filamentous forms of algae and showed that three species of Tribonema, namely T. vulgare, T. microchloron and T. viride, which have not been studied before with regard to the mechanisms of Cr(VI) removal, are likely responsible for the effective bioremediation of this highly Cr(VI)-polluted habitat. The studied algal community, with the ability to grow in extremely high concentrations of Cr(VI), i.e. up to ca. 6150 times the upper limit for surface water, exhibited hyperaccumulative properties for chromium (max 16230 mg/kg dry weight) under the given environmental conditions. We found that the main mechanism of Cr(VI) detoxification was reduction followed by Cr(III) biosorption - feasibly by ion exchange and complexation mechanisms - and that the excellent efficiency of chromium reduction under the given, unfavorable weakly alkaline conditions indicates the biological origin of this process. It was concluded that the examined reservoir inhabited by the algal community can be used, after some modifications, as a simple cost-effective "bioreactor" allowing the reduction of chromium concentration to the desired level. Moreover, the conducted studies are also essential to obtain in-depth knowledge and should also be helpful in the relevance of the community for its further application as a potential biosorbent of Cr(VI) on a global scale.

A Multidisciplinary Approach for the Assessment of Origin, Fate and Ecotoxicity of Metal(loid)s from Legacy Coal Mine Tailings

Over the course of history, the development of human societies implied the exploitation of mineral resources which generated huge amounts of mining wastes leading to substantial environmental contamination by various metal(loid)s. This is especially the case of coal mine tailings which, subjected to weathering reactions, produce acid mine drainage (AMD), a recurring ecological issue related to current and past mining activities. In this study, we aimed to determine the origin, the fate and the ecotoxicity of metal(loid)s leached from a historical coal tailing heap to the Beuveroux river (Franche-Comté, France) using a combination of mineralogical, chemical and biological approaches. In the constitutive materials of the tailings, we identified galena, tetrahedrite and bournonite as metal-rich minerals and their weathering has led to massive contamination of the water and suspended particles of the river bordering the heap. The ecotoxicity of the AMD has been assessed using Chironomus riparius larvae encaged in the field during a one-month biomonitoring campaign. The larvae showed lethal and sub-lethal (growth and emergence inhibition and delay) impairments at the AMD tributary and near downstream stations. Metal bioaccumulation and subcellular fractionation in the larvae tissues revealed a strong bioavailability of, notably, As, Pb and Tl explaining the observed biological responses. Thus, more than 70 years after the end of mining operations, the coal tailings remain a chronic source of contamination and environmental risks in AMD effluent receiving waters.

Recent Advances in Biosorption of Copper and Cobalt by Filamentous Fungi

Copper (Cu) and Cobalt (Co) are among the most toxic heavy metals from mining and other industrial activities. Both are known to pose serious environmental concerns, particularly to water resources, if not properly treated. In recent years several filamentous fungal strains have been isolated, identified and assessed for their heavy metal biosorption capacity for potential application in bioremediation of Cu and Co wastes. Despite the growing interest in heavy metal removal by filamentous fungi, their exploitation faces numerous challenges such as finding suitable candidates for biosorption. Based on current findings, various strains of filamentous fungi have high metal uptake capacity, particularly for Cu and Co. Several works indicate that Trichoderma, Penicillium, and Aspergillus species have higher Cu and Co biosorption capacity compared to other fungal species such as Geotrichum, Monilia, and Fusarium. It is believed that far more fungal species with even higher biosorption capability are yet to be isolated. Furthermore, the application of filamentous fungi for bioremediation is considered environmentally friendly, highly effective, reliable, and affordable, due to their low technology pre-requisites. In this review, we highlight the capacity of various identified filamentous fungal isolates for biosorption of copper and cobalt from various environments, as well as their future prospects.

Low-Energy Method for Water-Mineral Recovery from Acid Mine Drainage Based on Membrane Technology: Evaluation of Inorganic Salts as Draw Solutions

In this work, a novel study for acid mine drainage remediation and reutilization by means of a forward osmosis technology is addressed. The proposed process is a potential alternative path, which allows to recover high-quality water and to concentrate metals for its possible reutilization as synthetic minerals. This novel process will help in the mining industry evolving toward more sustainable processes and favors circular economy policies. Four inorganic salts (NaCl, KCl, CaCl₂, and MgCl₂) were evaluated as draw solutions from 1 to 5 M concentrations, in terms of water flux, water recovery, and metal rejection, using a thin-film composite (TFC) membrane. Water flux obtained was in the range of 14-53 L/(m² h). The highest water flux was found for MgCl₂, whereas the lowest correspond to KCl. The metal rejection obtained was greater than 99%. After a discussion and comparison of the results, MgCl₂ was chosen for evaluating long-term assay performance. Scanning electron microscope images of the thin-film composite membrane after long-term assays were taken. The tendency of Mg-Ca and Al-Fe fouling was observed over the membrane surface. The energy consumption was estimated from 4.84-22.3 kWh_e/m³, assuming that osmotically assisted reverse osmosis is used to regenerate the draw solution.

Removal of Pollutants from an AMD from a Coal Mine by Neutralization/Precipitation Followed by “In Vivo” Biosorption Step with the Microalgae Scenedesmus sp

This work evaluates the benefits of a complementary treatment step of acid mine drainage (AMD) using the algae Scenedesmus sp. in terms of algae biomass production, residual metal removal, and the toxicity of the discharged water. Conventional treatment by neutralization/precipitation of an AMD from a coal mine in Brazil was conducted with Ca(OH)2 at pH 8.7. Algal growth studies were performed in the treated AMD, with and without a nutrient supply. The raw effluent and treatments were compared in terms of residual concentration of metals and sulfate, conductivity, and toxicity with the Allium cepa and Daphnia magna test organisms. The results show that the conventional treatment allowed a major metal removal, reduction in the conductivity, and good indices in the toxicological parameters evaluated. The biosorption with in vivo microalgae improved the quality of the effluent for residual metals. No significant toxicity was observed to Allium cepa in all treatments performed, while the Daphnia magna test indicated a reduction in toxicity after the biosorption step. It was concluded that algae growth can be carried out in treated mine waters, providing algae biomass and helping to achieve the standards for water discharge.

Extremophile Microalgae: the potential for biotechnological application

Microalgae are photosynthetic microorganisms that use sunlight as an energy source, and convert water, carbon dioxide, and inorganic salts into algal biomass. The isolation and selection of microalgae, which allow one to obtain large amounts of biomass and valuable compounds, is a prerequisite for their successful industrial production. This work provides an overview of extremophile algae, where their ability to grow under harsh conditions and the corresponding accumulation of metabolites are addressed. Emphasis is placed on the high-value products of some prominent algae. Moreover, the most recent applications of these microorganisms and their potential exploitation in the context of astrobiology are taken into account.

Biological remediation of acid mine drainage: Review of past trends and current outlook

Formation of acid mine drainage (AMD) is a widespread environmental issue that has not subsided throughout decades of continuing research. Highly acidic and highly concentrated metallic streams are characteristics of such streams. Humans, plants and surrounding ecosystems that are in proximity to AMD producing sites face immediate threats. Remediation options include active and passive biological treatments which are markedly different in many aspects. Sulfate reducing bacteria (SRB) remove sulfate and heavy metals to generate non-toxic streams. Passive systems are inexpensive to operate but entail fundamental drawbacks such as large land requirements and prolonged treatment period. Active bioreactors offer greater operational predictability and quicker treatment time but require higher investment costs and wide scale usage is limited by lack of expertise. Recent advancements include the use of renewable raw materials for AMD clean up purposes, which will likely achieve much greener mitigation solutions.

The Potential of Seaweeds as a Source of Functional Ingredients of Prebiotic and Antioxidant Value

Two thirds of the world is covered by oceans, whose upper layer is inhabited by algae. This means that there is a large extension to obtain these photoautotrophic organisms. Algae have undergone a boom in recent years, with consequent discoveries and advances in this field. Algae are not only of high ecological value but also of great economic importance. Possible applications of algae are very diverse and include anti-biofilm activity, production of biofuels, bioremediation, as fertilizer, as fish feed, as food or food ingredients, in pharmacology (since they show antioxidant or contraceptive activities), in cosmeceutical formulation, and in such other applications as filters or for obtaining minerals. In this context, algae as food can be of help to maintain or even improve human health, and there is a growing interest in new products called functional foods, which can promote such a healthy state. Therefore, in this search, one of the main areas of research is the extraction and characterization of new natural ingredients with biological activity (e.g., prebiotic and antioxidant) that can contribute to consumers' well-being. The present review shows the results of a bibliographic survey on the chemical composition of macroalgae, together with a critical discussion about their potential as natural sources of new functional ingredients.

Study on the Degradation of Sodium Diethyldithiocarbamate (DDTC) in Artificially Prepared Beneficiation Wastewater with Sodium Hypochlorite

The degradation of DDTC in beneficiation wastewater has become an increasingly concerned issue due to the serious effects on the environment. In this study, the degradation characteristics of DDTC in artificially prepared beneficiation wastewater were investigated by adding sodium hypochlorite as an oxidant, and the influences of different degradation conditions on removal efficiency of DDTC were analyzed systematically. The results indicated that the degradation rate of DDTC without sodium hypochlorite added can reach 88.4% in a stewing time of 6 h. When the dosage of sodium hypochlorite was 400 mg·L−1, the degradation rate of DDTC can reach 91.28% for 1 min reaction time under the natural condition of pH value 5.98 and reaction temperature 25°C. The DDTC in the wastewater was firstly degraded into carbon disulfide and diethylamine, and then carbon disulfide was further degraded into CO2, S, or SO42−, while diethylamine was degraded into N2 and CO2. The research results can provide a technical basis for the treatment of beneficiation wastewater containing DDTC.

Biological approaches to tackle heavy metal pollution: A survey of literature

Pollution by heavy metals has been identified as a global threat since the inception of industrial revolution. Heavy metal contamination induces serious health and environmental hazards due to its toxic nature. Remediation of heavy metals by conventional methods is uneconomical and generates a large quantity of secondary wastes. On the other hand, biological agents such as plants, microorganisms etc. offer easy and eco-friendly ways for metal removal; hence, considered as efficient and alternative tools for metal removal. Bioremediation involves adsorption, reduction or removal of contaminants from the environment through biological resources (both microorganisms and plants). The heavy metal remediation properties of microorganisms stem from their self defense mechanisms such as enzyme secretion, cellular morphological changes etc. These defence mechanisms comprise the active involvement of microbial enzymes such as oxidoreductases, oxygenases etc, which influence the rates of bioremediation. Further, immobilization techniques are improving the practice at industrial scales. This article summarizes the various strategies inherent in the biological sorption and remediation of heavy metals.