Airborne foliar transfer of PM bound heavy metals in Cassia siamea: A less common route of heavy metal accumulation

Effects of atmospheric deposition on heavy metal contamination in paddy field systems under different functional areas in ChangZhuTan, Hunan Province, China

In recent decades, the problem of heavy metal contamination in rice paddies has attracted widespread attention. However, most studies on heavy metal contamination in paddy fields are biased towards soil and/or rice plants, without taking atmospheric deposition into account. In this study, atmospheric deposition, paddy soil, and rice samples were collected from three functional areas (area proximity to factories, along the roadside, and suburban) in ChangZhuTan, Hunan Province. The pollution characterization, translocation, and health risk of heavy metals were reassessed. The findings revealed that Cd and As contamination in the study area's soils was more severe, with point exceedance rates reaching 70 % and 35.9 %, respectively. The highest concentrations of As, Ni, Cd, and Pb in atmospheric deposition were found along the roadside, with 1.42 μg/m2/day, 3.21 μg/m2/day, 0.34 μg/m2/day, and 8.28 μg/m2/day, respectively. In area proximity to factories, As and Ni in atmospheric deposition showed to be lowest, whereas Cd and Pb concentrations showed lowest in suburban areas. Furthermore, the accumulation of Cd and Pb in rice grains in regions proximity to factories was significantly higher than in other regions. The human health risk assessment indicated the health risk caused by rice intake in areas proximity to factories was the highest and requires attention, which was mainly due to Cd accumulation, with HQ value reached 3.19. Correlation tests indicate that atmospheric deposition has a positive effect on heavy metal enrichment in rice grains. Further Random Forest analysis revealed that the transport of heavy metals from atmospheric deposition to leaves and shells were important influencing factors for As, Cd, Ni and Mg accumulation in rice grain. Therefore, more attention should be paid to the effects of atmospheric deposition on the accumulation of heavy metals in paddy fields in order to maintain the production safety of crops.

Foliar uptake screening: A promising strategy for identifying wheat varieties with low lead accumulation

Lead (Pb) contamination in wheat grain is of great concern, especially in North China. Atmospheric deposition is a major contributor to Pb accumulation in wheat grain. Screening low Pb accumulating wheat varieties has been an effective method for addressing Pb contamination in wheat grain. However, identifying wheat varieties with low Pb accumulation based on foliar uptake of atmospheric Pb has been neglected. Therefore, two field trials with distinct atmospheric Pb deposition were conducted to screen for stable varieties with low Pb accumulation. It was verified that YB700 and CH58, which have high thousand-grain weights and stable low Pb accumulation in field 1 (0.19 and 0.13 mg kg-1) and field 2 (0.17 and 0.20 mg kg-1), respectively, were recommended for cultivation in atmospheric Pb contaminated farmlands in North China. Furthermore, indoor experiments were conducted to investigate Pb uptake by the roots and leaves of different wheat varieties. Our findings indicate that Pb accumulation in different wheat varieties is primarily influenced by foliar Pb uptake rather than root Pb uptake. Interestingly, there was a positive correlation (p < 0.05) between the Pb concentrations in leaves and the stomatal width and trichome length of the adaxial epidermal surface. Additionally, there is a positive correlation (p < 0.01) between the Pb concentration in the wheat grain and trichome length. In conclusion, the screening of wheat varieties with narrower stomatal widths or shorter trichomes based on foliar uptake pathways is an effective strategy for ensuring food safety in areas contaminated by atmospheric Pb.

Reconstruction of a century of air pollution history in Nanjing, China, using trace elements in situ leaf specimens of Platanus × hispanica and Pittosporum tobira

Leaves can specifically uptake trace elements from the surrounding environment. And tree leaves are a good biological indicator for air pollution. Therefore, chemical analysis of leaf specifications can be used to reproduce a historical record of air pollution. To better understand the history of urban air pollution from the 1920s to the 2020s in Nanjing, China, leaf samples of two woody plants, Platanus × hispanica and Pittosporum tobira, were collected in this study as environmental indicators from different historical periods. These included historical herbarium specimens and current leaves from live trees. The concentrations of 10 trace elements were determined in the samples using ICP‒MS. Pollution indices were calculated, yielding the key findings. The historical leaf samples showed continuously increasing mean concentrations of the 10 trace elements over time, which significantly correlating with automobile quantities and the number of large-scale industrial enterprises (p < 0.05). Moreover, modern leaf trace element concentrations were significantly correlated with PM10, PM2.5, automobiles, large-scale industrial enterprises, and atmospheric factors, confirming these as sources. In addition to the historical growth trend, spatial heterogeneity was revealed in historical Platanus × hispanica leaf samples from the 14 sites in Nanjing. Changes in heavy metal trace element pollution distributions were consistent with transportation and industrial expansion, with homologous patterns across elements. Specifically, post 1980s increases were observed in the representative NJ2 (Zhongshan Botanical Garden) and the NJ5(Nanjing University) sites, with higher concentrations occurring at in the NJ5 contaminated site than at the NJ2 uncontaminated site. After 2009, the 10 element (except Cd) pollution indices in Platanus × hispanica leaves fluctuated but declined overall. This reconstruction of Nanjing's air pollution history demonstrates that ample environmental information can be extracted from plant leaf markers over time and space.

Straw removal or non-removal affects cadmium (Cd) accumulation in soil-rice (Oryza sativa L.) system at different ambient air Cd levels

Despite the potential importance of the removal of contaminated straw for heavy metal output from agricultural soils, previous studies have primarily focused on the variation in the metal concentration without considering the impact input of heavy metals from atmospheric deposition. Here, rice was grown under field conditions, and, as a reference, in a deposition-free environment, and exposed to different ambient air Cd levels. Two consecutive years of pot experiments were conducted in two study areas (ZZ and LY) to examine the changes in soil physicochemical properties as well as Cd accumulation in the soil-rice (Oryza sativa L.) system in response to straw return or removal. The results showed that rice straw return enhanced the soil pH and organic matter (OM) content, but reduced the soil redox potential (Eh); and the variation in amplitude increased with number of cultivation years. After two years of cultivation, the concentrations of soil total Cd and extractable Cd in the straw-removal treatments reduced by 9.89-29.49% and 4.88-37.74%, respectively, whereas those in the straw-return treatments exhibited a slight decrease, or even an increase. This indicated that straw removal could effectively reduce the concentration and bioavailability of Cd in contaminated farmland, which was further confirmed by the results for accumulation of Cd in rice tissues. In addition, the contribution from atmospheric deposition was confirmed by the greater variation in Cd concentration in soils and rice tissues under deposition-free conditions. A major implication of our findings is that the adoption of reasonable straw-treatment measures and proper control over ambient air heavy metals can promote the remediation efficiency of Cd-contaminated fields.

Backyard aerosol pollution monitors: foliar surfaces, dust enrichment, and factors influencing foliar retention

Air pollution is one of the leading causes of death from noncommunicable diseases globally, and in Arizona, both mining activities and abandoned agriculture can generate erodible dust. This dust is transported via wind and can carry high amounts of toxic pollutants. Industry-adjacent communities, or "fenceline communities," are generally closer to the pollution sources and are disproportionally impacted by pollution, or in this case, dust. The dust transported from the mine settles into nearby rivers, gardens, and homes, and increases the concentrations of elements beyond their naturally occurring amounts (i.e., enriched). This study was built upon previous community science work in which plant leaves were observed to collect similar concentrations to an accepted dust collection method and illustrated promise for their use as low-cost air quality monitors in these communities. This work investigated the concentration of Na, Mg, Al, K, Ca, Mn, Co, Cu, Zn, Mo, and Ba in dust from the leaves of community-collected backyard and garden plants (foliar dust), as well as if certain variables affected collection efficacy. This assessment evaluated (1) foliar concentration versus surface area for 11 elements, (2) enrichment factor (EF) values and ratios, (3) comparisons of foliar, garden, and yard samples to US Geological Survey data, and (4) what variable significantly affected dust collection efficacy. The EF results indicate that many of the samples were enriched (anthropogenically contaminated) and that the foliar samples were generally more contaminated than the yard and garden soil samples. Leaf surface area was the most influential factor for leaf collection efficiency (p < 0.05) compared to plant family or sampling location. Further studies are needed that standardize the plant species and age and include multiple replicates of the same plant species across partnering communities. This study has demonstrated that foliar dust is enriched in the participating partnering communities and that plant leaf samples can serve as backyard aerosol pollution monitors. Therefore, foliar dust is a viable indicator of outdoor settled dust and aerosol contamination and this is an adoptable monitoring technique for "fenceline communities."

Mechanisms of lead uptake and accumulation in wheat grains based on atmospheric deposition-soil sources

Lead (Pb) accumulation in wheat grains depends on two aspects: i) Pb uptake by the roots and shoots, and ii) the translocation of organ Pb into the grain. However, the underlying mechanism of the uptake and transport of Pb in wheat remains unclear. This study explored this mechanism by establishing field leaf-cutting comparison treatments. Interestingly, as the organ with the highest Pb concentration, only 20.40 % of the root's relative contribution to grain Pb. The relative contributions of the spike, flag leaf, second leaf, and third leaf to grain Pb were 33.13 %, 23.57 %, 13.21 %, and 9.69 %, respectively, which was opposite to their Pb concentration distribution trends. According to Pb isotope analysis, it was found leaf-cutting treatments reduced the proportion of atmospheric Pb in grain, and grain Pb predominantly comes from atmospheric deposition (79.60 %). Furthermore, from the bottom to the top, the concentration of Pb in internodes decreased gradually, and the proportions of Pb originating from soil in the nodes also decreased, revealing that wheat nodes hindered the translocation of Pb from roots and leaves to the grain. Therefore, the hindering effect of nodes on the migration of soil Pb in wheat resulted in atmospheric Pb having a more convenient pathway to the grain than soil Pb, and further leading grain Pb accumulation primarily depended on the contribution of the flag leaf and spike.

Transcriptomic mechanisms of reduced PM2.5-Pb retention in the leaves of the low-Pb-accumulation genotype of Chinese cabbage

Atmospheric fine particulate matter (PM_2.5) mainly contributes to Pb accumulation in the edible leaves of Chinese cabbage in North China. It was found that a low-Pb-accumulation (LPA) genotype of Chinese cabbage contained less Pb in leaves than high-Pb-accumulation (HPA) genotype exposed to PM_2.5-Pb. However, there are no data on the transcriptional regulatory mechanisms of foliar PM_2.5-Pb uptake by Chinese cabbage. The present study investigated the retention of PM_2.5-Pb in foliar apoplast and symplasm and the underlying molecular mechanisms of reduced Pb in LPA leaves. It appeared more Pb in apoplast and less Pb in symplasm of LPA leaves, whereas the pattern was opposite in HPA. There were 2646 and 3095 differentially expressed genes (DEGs) in LPA and HPA leaves under PM_2.5-Pb stress with clearly genotype-specific function, respectively. Furthermore, mRNA levels of XTH16 regulating cell wall thickening, PME2 and PME6 involved in cell wall remodification were significantly expressed in LPA, but not in HPA. Meanwhile, foliar PM_2.5-Pb stress downregulated expression of ZIP1, YSL1, and CNGC3 responsible for Pb influx to cell, and upregulated expression of ABCG36 regulated Pb efflux from symplasm in LPA leaves. These results improve our understanding to the mechanisms underlying foliar Pb uptake from PM_2.5-Pb at transcriptomic level.

Direct absorption of atmospheric lead by rapeseed siliques is the leading cause of seed lead pollution

Rapeseed cultivation is a novel approach to safely utilizing lead (Pb) contaminated farmland. However, the mechanism of Pb absorption in seeds remains uncertain. A field experiment was conducted to explore this mechanism with two contrasting treatments: rapeseed exposed to atmospheric deposition and non-exposed treatment. Non-exposed treatment ultimately decreased Pb content in leaf, silique, and seed by 46.7%, 53.7%, and 53.6%, respectively. Sub-microstructure analysis further confirmed that rapeseed leaves and siliques could directly absorb atmospheric Pb. In addition, Pb isotope analysis indicates that atmospheric deposition is the primary source of silique and seed Pb. The root and silique organs had relative Pb contributions of 28.0% and 72.0%, respectively, to seed. Thus, the direct absorption of atmospheric Pb by siliques during the filling stage was found to be the leading cause of seed Pb pollution.

Heavy metal accumulation in leaves of selected plant species in urban areas of Delhi

Heavy metals beyond their permissible limits are major contaminants and causes of concern due to their persistent nature and health hazards. Several studies validated the utilization of plants as biomonitors and bioaccumulators for heavy metal pollution. Therefore, this study was conducted to examine the proficiency for heavy metal monitoring and mitigation by commonly found plant species in urban areas of Delhi. For this objective, four sites (viz., control, residential, commercial, and industrial) and sixteen usually growing plant species were selected. Four heavy metals, i.e., lead (Pb), cadmium (Cd), copper (Cu), and zinc (Zn), were analysed for soil and dust from each site, and leaf samples from each plant, at all sites, and various other parameters were calculated. Among the four elements, Pb and Cd showed maximum geoaccumulation and contamination at all sites. Pollution load index (PLI) values for both soil and dust indicated that industrial sites (1.78, 2.15) were most contaminated followed by commercial (1.52, 1,87), residential (1.41, 1.67), and control (1.22, 1.37) sites. Concentrations of Pb, Cu, and Zn were found to be highest in Morus alba, while Cd concentrations were found to be highest in Millettia pinnata (L.) Panigrahi. From various analyses, we concluded that commonly found plant species such as Ficus religiosa L., Terminalia arjuna (Roxb. Ex DC.) Wight &Arn., Morus alba L., Prosopis juliflora (Sw.) DC., and M. pinnata proved to be exceptional biomonitors and bioaccumulators for heavy metals in urban areas. Therefore, these plant species are highly recommended for plantation in urban areas for decontamination of the air and soil by mitigating heavy metal pollution.

Heavy metal habitat: A novel framework for mapping heavy metal contamination over large-scale catchment with a species distribution model

Heavy metal(loid)s (HMs) have been consistently entering the food chain, imposing great harm on environment and public health. However, previous studies on the spatial dynamics and transport mechanism of HMs have been profoundly limited by the field sampling issues, such as the uneven observations of individual carriers and their spatial mismatch, especially over large-scale catchments with complex environment. In this study, a novel methodological framework for mapping HMs at catchment scale was proposed and applied, combining a species distribution model (SDM) with physical environment and human variables. Based on the field observations, we ecologicalized HMs in different carriers as different species. This enabled the proposed framework to model the 'enrichment area' of individual HMs in the geographic space (termed as the HM 'habitat') and identify their 'hotspots' (peak value points) within the catchment. Results showed the output maps of HM habitats from secondary carriers (soil, sediment, and wet deposition) well agreed with the influence of industry contaminants, hydraulic sorting, and precipitation washout process respectively, indicating the potential of SDM in modeling the spatial distributions of the HM. The derived maps of HMs from secondary carriers, along with the human and environmental variables were then input as explanatory variables in SDM to predict the spatial patterns of the final HM accumulation in river water, which was observed to have largely improved the prediction quality. These results confirmed the value of our framework to leverage SDMs from ecology perspective to study HM contamination transport at catchment scale, offering new insights not only to map the spatial HM habitats but also help locate the HM transport chains among different carriers.

The Relative Contributions of Different Wheat Leaves to the Grain Cadmium Accumulation

In the context of increasing atmospheric particles pollution, wheat cadmium (Cd) pollution caused by atmospheric deposition in agro-ecosystems has attracted increasing attention. However, the relative contribution of different wheat leaves-to-grain Cd accumulation is still unclear. We assessed the roles of different wheat leaves on grain Cd accumulation with field-comparative experiments during the filling stage. Results show that wheat leaves can direct uptake atmospheric Cd through stomata, and the flag leaf exhibited a higher Cd concentration compared to other leaves. The relative contribution of the leaves-to-grain Cd accumulation decreased gradually during the grain-filling period, from 34.44% reaching 14.48%, indicating that the early grain-filling period is the critical period for leaf Cd contributions. Moreover, the relative contribution of flag leaves (7.27%) to grain Cd accumulation was larger than that of the sum of other leaves (7.21%) at maturity. Therefore, the flag leaf is the key leaf involved in grain Cd accumulation, and controlling the transport of Cd from leaves to grains at the early filling period, particularly flag leaf, could help to ensure wheat grain safety, thus ensuring the safety of food production.

Foliar dust particle retention and metal accumulation of five garden tree species in Hangzhou: Seasonal changes

As particulate matter and heavy metals in the atmosphere affect the atmospheric quality, they pose a threat to human health through the respiratory system. Vegetation can remove airborne particles and purify the atmosphere. Plant leaves are capable of effectively absorbing heavy metals contained by particulates. To evaluate the effects of different garden plants on the particulate matter retention and heavy metal accumulation, the seasonal changes of dust retention of five typical garden plants were compared in the industrial and non-industrial zones in Hangzhou. Results revealed that these species differed in dust retention with the descending order of Loropetalum chinense > Osmanthus fragrans > Pittosporum tobira > Photinia × fraseri > Cinnamomum camphora, which were related to the microstructure feature of the leaf. These species also showed seasonal variation in dust retention, with the highest in summer, followed by winter, autumn, and spring, respectively. The total suspended particle per unit leaf area was higher in the industrial site (80.54 g m^-2) than in the non-industrial site (19.77 g m^-2). Leaf particles in different size fractions differed among species, while coarse particles (d > ten μm) predominated in most cases. The L. chinense and C. camphora plants accumulated the greatest Pb and Ni compared to other plants. Overall, L. chinense was the best suitable plant species to improve the air quality.

Anthropogenic Sources Dominate Foliar Chromium Dust Deposition in a Mining-Based Urban Region of South Africa

Dust pollution can be severe in urban centers near mines and smelters. Identification of dust sources and assessing dust capturing plant morphological traits may help address the problem. A chromium (Cr) mining and ferrochrome smelting region in Sekhukhuneland, South Africa, was investigated to identify the sources of Cr in soil and plant leaf surfaces and to evaluate the association between Cr sources and plant morphology. Combinations of bi- and multivariate statistical analysis techniques were applied. Non-significant relation between Cr quantities in surface soil and on leaf surfaces suggested negligible Cr dust contribution from soil to leaves. Association among Cr, Fe, Mg, Al, and Si levels on leaf surfaces confirmed their shared origin, possibly from chromite containing dust dispersed by mines, smelters, roads, and tailings. Both plant morphology and Cr sources (number and proximity to mines and roads) conjointly determined Cr dust deposition on leaf surfaces. Air mass movement patterns further identified local polluters, i.e., mines, ferrochrome smelters, and roads, as dominant dust sources in the region. Common plant species showed Cr dust adhesion favouring traits (plant tallness, larger leaf area, dense epicuticular wax structures, and larger stomata) and projected dust mitigation prospects for Sekhukhuneland.

Mechanism of Pb accumulation in Chinese cabbage leaves: Stomata and trichomes regulate foliar uptake of Pb in atmospheric PM2.5

Chinese cabbage (Brassica rapa ssp. pekinensis) is one of the most popular and frequently consumed leafy vegetables. It was found that atmospheric PM_2.5-Pb contributes to Pb accumulation in the edible leaves of Chinese cabbage via stomata in North China during haze seasons with high concentrations of fine particulate matter in autumn and winter. However, it is unclear whether both stomata and trichomes co-regulate foliar transfer of PM_2.5-Pb from atmospheric deposition to the leaf of Chinese cabbage genotypes with trichomes. Field and hydroponic experiments were conducted to investigate the effects of foliar uptake of PM_2.5-Pb on Pb accumulation in leaves using two genotypes of Chinese cabbage, one without trichomes and one with trichomes. It was verified that open stoma is a prominent pathway of foliar PM_2.5-Pb transfer in the short-term exposure for 6 h, contributing 74.5% of Pb accumulation in leaves, whereas Pb concentrations in the leaves of with-trichome genotype in the rosette stage were 6.52- and 1.04-fold higher than that of without-trichome genotype in greenhouse and open field, respectively, which suggests that stomata and trichomes co-regulate foliar Pb uptake of from atmospheric PM_2.5. Moreover, subcellular Pb in the leaves was distributed in the following order of cytoplasm (53.8%) > cell wall (38.5%)> organelle (7.8%), as confirmed through high-resolution secondary ion mass spectrometry (NanoSIMS). The Leadmium™ Green AM dye manifested that Pb in PM_2.5 entered cellular space of trichomes and accumulated in the basal compartment, enhancing foliar Pb uptake in the edible leaves of cabbage. The results of these experiments are evidence that both stomata and trichomes are important pathways in the regulation of foliar Pb uptake and translocation in Chinese cabbage.

Contribution of the flag leaf to lead absorption in wheat grain at the grain-filling stage

Wheat flag leaf (FL) is one of the primary sources of carbohydrates in grains; however, its role in grain lead (Pb) absorption remains unclear. A field experiment was conducted to assess the relative contribution of the FL to Pb accumulation in wheat grain by two contrasting treatments: without (CK) and with FL removal (FLR) at the grain-filling stage. The Pb concentration in leaves was closely related to leaf strata and decreased from FL to the third leaf. FLR treatment significantly reduced the yield and grain Pb concentration by 2.79% and 11.47%, respectively. The contribution of FL to grain Pb accumulation decreased gradually with the filling process, from 35.08% (at early stage) to 13.94% (at maturity stage). After FLR, the contribution proportion of atmospheric fallout to grain Pb decreased from 69.01% (CK) to 62.43% (FLR). Combined isotope analysis with scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM-EDS) revealed that the main contribution of FLs to grain Pb originated from Pb fallout in fine atmospheric particles. Therefore, taking measures to reduce the influence of fine atmospheric particles on wheat may be an effective way to control wheat grain Pb contamination.

Foliar surfaces as dust and aerosol pollution monitors: An assessment by a mining site

Recent studies in the southwestern United States have shown that smelting processes and mine tailings emit heavy metal(loid)s that are distributed via wind dispersion to nearby communities. With increased attention regarding the effect of air pollution on environmental health, communities have begun to use citizen/community-based monitoring techniques to measure the concentration of metal(loid)s and evaluate their air quality. This study was conducted in a mining community to assess the efficacy of foliar surfaces as compared to an inverted disc (frisbee) to sample aerosol pollutants in ambient air. The assessment was conducted by evaluating As, Pb, Cd, Cu, Al, Ni, and Zn concentrations versus distance from a former smelter, statistical and regression analyses, and enrichment factor calculations compared to similar sites worldwide. Both the foliar and frisbee collection methods had a decrease in metal(loid)s concentration as a function of distance from the retired smelter. Statistical calculations show that the collection methods had similar mean concentrations for all of the metal(loid)s of interest; however, the tests also indicate that the frisbee collection method generally collected more dust than the foliar method. The enrichment factors from both collection methods were comparable to similar studies by other mining areas referenced, except for aluminum. Since there is evidence of enrichment, correlation between methods, and citizen/community science potential, these efforts show promise for the field. Further studies should consider alternating the types of plant used for foliar collection as well as collecting samples on a more frequent basis in order to sufficiently categorize results based on meteorological conditions.

Quantifying the Potential Contribution of Urban Forest to PM2.5 Removal in the City of Shanghai, China

Climate change and air pollution pose multiple health threats to humans through complex and interacting pathways, whereas urban vegetation can improve air quality by influencing pollutant deposition and dispersion. This study estimated the amount of PM2.5 removal by the urban forest in the city of Shanghai by using remote sensing data of vegetation and a model approach. We also identified its potential contribution of urban forest presence in relation to human population and particulate matter concentration. Results show that the urban forest in Shanghai reached 46,161 ha in 2017, and could capture 874 t of PM2.5 with an average of 18.94 kg/ha. There are significant spatial heterogeneities in the role of different forest communities and administrative districts in removing PM2.5. Although PM2.5 removal was relatively harmonized with the human population distribution in terms of space, approximately 57.41% of the urban forest presented low coupling between removal capacity and PM2.5 concentration. Therefore, we propose to plant more trees with high removal capacity of PM2.5 in the western areas of Shanghai, and increase vertical planting in bridge pillars and building walls to compensate the insufficient amount of urban forest in the center area.

Extremely high concentrations of zinc in birch tree leaves collected in Chelyabinsk, Russia

Zinc is an essential trace element and a vital microelement for human health. Zinc can be toxic when exposures exceed physiological needs. Toxic effects in humans are most evident from inhalation exposure to high concentrations of Zn compounds. Urban air pollution can be especially dangerous due to the Zn content in airborne dust. Tree leaves can absorb significant levels of zinc. In this study, leaf deposition of Zn was investigated in Chelyabinsk, Russia. Russian zinc production plant and metallurgical plant are located in Chelyabinsk. Extremely high concentrations of Zn (316-4000 mg kg^-1) were found in the leaves of birch trees. It is well known that traffic also is Zn source in an urban environment. Trees, growing at the different distances from zinc production and metallurgical plants and road to identify the contribution of each source (road or industry), were studied. Through SEM analysis, the prevalence of small particulates (PM10 and less), containing Zn, illustrated leaf Zn deposition from the air by passing root accumulation. It was shown that emission of zinc production plant and the metallurgical plant is the main source of leaf Zn deposition in Chelyabinsk.

Contribution of PM2.5-Pb in atmospheric fallout to Pb accumulation in Chinese cabbage leaves via stomata

Foliar uptake of Pb is especially important when Chinese cabbage (Brassica rapa spp. pekinensis), having a large leaf surface area, is cultivated in North China during seasons with heavy haze. However, the mechanisms of foliar Pb uptake via stomata by Chinese cabbage exposed to atmospheric fallout are unclear. A field experiment was conducted to explore the impacts of Pb in particulate matter with sizes ≤ 2.5 µm (PM_2.5-Pb) from atmospheric fallout to Pb accumulation in cabbage leaves through stomata. Cabbage varieties with low-Pb-accumulation (LPA) and high-Pb-accumulation (HPA) were examined using inductively coupled plasma-mass spectrometry and scanning electron microscopy/energy-dispersive X-ray analysis. The ²⁰⁶Pb/²⁰⁷Pb and ²⁰⁸Pb/²⁰⁷Pb ratios of PM_2.5, plants, and soil demonstrated that the major source of Pb in cabbage leaves was PM_2.5. The average width and length of the stomatal apertures were 7.14 and 15.61 µm for LPA cabbage and 8.10 and 16.64 µm for HPA cabbage, which are large enough for PM_2.5-Pb to enter the leaves. The HPA cabbage had significantly higher stomatal width-to-length ratios than the LPA cabbage, indicating that the former trapped much more PM_2.5-Pb and accumulated more Pb. These results clarify the contributions of the stomatal characteristics to PM_2.5-Pb accumulation in the edible parts of Chinese cabbage.

Biomonitoring of heavy metal contamination with roadside trees from metropolitan area of Hefei, China

Air and dust borne heavy metals can be deposited and bioaccumulated by plants; therefore, biomonitoring employing plants is an effective tool for environmental impact assessment in urban environments. In this study, in addition to road dust, leaves and bark were collected from four common tree species at roadside and urban park sampling sites within the metropolitan area of Hefei, China. A range of heavy metals were analyzed by ICP-MS and AFS. The metal accumulation index (MAI) was adopted to compare the bioaccumulation capacity. Results showed that Cd was highly enriched in road dust although its abundance was low in comparison with that of other elements. The MAI values presented a narrow range (1.8-2.7); however, significant differences (p < 0.05) were found for Al, Cu, Zn, and As among the tree species. Moreover, deciduous Platanus orientalis bioaccumulated more nonessential As than the other species and deserved further risk management. In addition, bark samples from Cinnamomum camphora bioaccumulated more heavy metals than the other species as a result of its morphological and anatomical characteristics. The distribution patterns of heavy metals in tree tissues showed obvious spatial heterogeneity, as impacted by anthropogenic activities to varying degrees. This study examined the biomonitoring potential of roadside trees and the distribution pattern of heavy metals in an urban area under rapid development. Results from the present study could provide baseline data for urban environmental impact assessment and the design of green belts.

Ecotoxicology of Heavy Metal(loid)-Enriched Particulate Matter: Foliar Accumulation by Plants and Health Impacts

Atmospheric contamination by heavy metal-enriched particulate matter (metal-PM) is highly topical nowadays because of its high persistence and toxic nature. Metal-PMs are emitted to the atmosphere by various natural and anthropogenic activities, the latter being the major source. After being released into the atmosphere, metal-PM can travel over a long distance and can deposit on the buildings, water, soil, and plant canopy. In this way, these metal-PMs can contaminate different parts of the ecosystem. In addition, metal-PMs can be directly inhaled by humans and induce several health effects. Therefore, it is of great importance to understand the fate and behavior of these metal-PMs in the environment. In this review, we highlighted the atmospheric contamination by metal-PMs, possible sources, speciation, transport over a long distance, and deposition on soil, plants, and buildings. This review also describes the foliar deposition and uptake of metal-PMs by plants. Moreover, the inhalation of these metal-PMs by humans and the associated health risks have been critically discussed. Finally, the article proposed some key management strategies and future perspectives along with the summary of the entire review. The abovementioned facts about the biogeochemical behavior of metal-PMs in the ecosystem have been supported with well-summarized tables (total 14) and figures (4), which make this review article highly informative and useful for researchers, scientists, students, policymakers, and the organizations involved in development and management. It is proposed that management strategies should be developed and adapted to cope with atmospheric release and contamination of metal-PM.

Foliar application of lead and arsenic solutions to Spinacia oleracea: biophysiochemical analysis and risk assessment

Atmospheric contamination by heavy metal(loid)s is a widespread global issue. Recent studies have shown foliar pathway of heavy metal(loid) uptake by plants, thus menacing plant productivity and threatening health risks. In contrast to root uptake of heavy metal(loid)s, there is scarce data available on heavy metal(loid) foliar uptake, accumulation in different plant parts, changes in growth and other biophysiochemical processes/reactions, detoxification mechanisms and associated health risks due to the consumption of contaminated vegetables. This study evaluated the effect of foliar application of two potentially toxic metal(loid)s (arsenic (As) and lead (Pb)) on their uptake by Spinacia oleracea, plant growth, pigment contents, physiological changes, and activation of antioxidative enzymes. Results revealed that S. oleracea seedlings can accumulate both the metal(loid)s in their leaves via foliar pathway. Arsenic was transferred from the leaves towards the roots, while Pb was mainly sequestered in S. oleracea leaves. Both the metal(loid)s significantly decreased plant growth and pigment contents, As being more toxic than Pb. Foliar application of As and Pb did not cause lipid peroxidation and overproduction of reactive oxygen species (ROS). However, both the metal(loid)s enhanced the activities of antioxidative enzymes. We also calculated possible health risks (both non-carcinogenic and carcinogenic) due to As and Pb accumulation in the edible parts for both the adults and children. It was observed that As can induce non-carcinogenic effects (HQ > 1) in children only, while both As and Pb can cause carcinogenic hazards in both adults and children under their all applied foliar levels. Therefore, it is proposed that As and Pb contents in the atmosphere must be monitored continuously for their possible foliar uptake and accumulation in edible plant parts to avoid cancer risks. Moreover, multivariate analysis traced weak-strong correlations between metal(loid) treatments and plant response variables.

Foliar uptake and transport of atmospheric trace metals bounded on particulate matters in epiphytic Tillandsia brachycaulos

Epiphytic Tillandsia species are uniquely suitable for the study of foliar uptake of atmospheric trace metals (ATM) because these plants can only rely on their leaves for this purpose. Therefore, we analyzed the uptake and transport of different metals (Fe, Al, Zn, Mn, Ba, Ti, Cu, Ni, Cr, Sn, Pb, Co, As, and Se) bounded on atmospheric particulate matters (APM) in Tillandsia brachycaulos Schltdl. The results showed that the metal contents inside leaves significantly (p < .05) increased after APM exposure. There was a significant (p < .05) positive correlation between the content of 14 trace metals accumulated on the leaf surface and inside the leaf, which indicated that APM is the main source of ATM uptake. The subcellular analysis showed that the Pb, Cu, Ni, Zn, and Cr absorbed by T. brachycaulos were stored primarily in the cell walls and organelles. After the removal of foliar trichomes of T. brachycaulos, the metal contents on the leaf surface decreased, whereas the contents of most metals inside the leaf increased. This is an evidence that foliar trichomes serve a protective function by intercepting ATM onto the leaf surface.Novelty statementsThere was a significant positive correlation between the contents of 14 trace metals accumulated on the leaf surface and in the leaf of T. brachycaulos, which indicated that atmospheric particulate matters are the main source of trace metals in the leaves.After the removal of foliar trichomes of T. brachycaulos, the trace metal contents on the leaf surface decreased, whereas the contents of most trace metals inside the leaf increased. This is an evidence that foliar trichomes serve a protective function by intercepting atmospheric trace metals onto the leaf surface.

Risk assessment and biophysiochemical responses of spinach to foliar application of lead oxide nanoparticles: A multivariate analysis

Despite extensive research progress in the recent past, the data regarding foliar uptake of heavy metals, associated biophysiochemical changes inside plants and possible health hazards are limited. This study determined the effect of foliar application of lead oxide nanoparticles (PbO-NPs) on lead (Pb) accumulation, physiological and biochemical changes inside spinach plants and associated health risks. A green method was used to prepare PbO-NPs using coconut water. Scanning electron microscopy (SEM) showed the preparation of smooth, unwrinkled, granular and spherical PbO-NPs. Spinach leaves were exposed via foliar application to three concentrations of PbO-NPs (0, 10 and 50 mg/plant). Foliar PbO-NPs application resulted in a significant accumulation of Pb in leaves (42.25 μg g^-1), with limited translocation towards root tissues (4.46 μg g^-1). This revealed that spinach can accumulate considerable amount of Pb via foliar uptake. Lead accumulation inside spinach caused a significant decrease in pigment contents (38%) and dry weight (67%). After foliar uptake, Pb caused several-fold increase in the activities of catalase and peroxidase. However, foliar PbO-NPs did not induce significant changes in H₂O₂ production, lipid peroxidation and superoxide dismutase activity. Application of PbO-NPs (50 mg/plant) showed possible health risks (non-carcinogenic) due to ingesting Pb-contaminated leaves of spinach. It is proposed that atmospheric contamination and foliar deposition of metal-PM can seriously affect vegetable growth and can provoke health issues due to ingestion of metal-enriched vegetables. Therefore, atmospheric levels of heavy metals need to be monitored on a regular basis to avoid their food chain contamination and possible human exposure.

The bioavailability and contribution of the newly deposited heavy metals (copper and lead) from atmosphere to rice (Oryza sativa L.)

Despite the global importance of atmospheric heavy metal input into agricultural soils, research has primarily focused on the amount of the depositions with limited attention given to the risk of the newly deposited heavy metals. To understand the remobilization of the newly deposited copper (Cu) and lead (Pb) from the atmosphere and explore the metals' mobility and bioavailability to rice (Oryza sativa L.), a soil transplant experiment was conducted in three areas along a gradient of atmospheric depositions. Approximately 61% of the Cu and 76% of the Pb depositions tended to be present in potentially mobile fractions. The soil retention of newly deposited Cu and Pb presented as higher mobile fractions than these in the original soil. The newly deposited Cu and Pb in soils only accounted for 0.34-8.7% and 0.07-0.29% of the total soil Cu and Pb pools, but they contributed 30-84% and 6-41% in rice tissues, respectively. A major implication of these findings is that once the heavy metal is deposited, it may be reactivated in soils and transported to aerial parts or foliar uptake into plant tissues, emphasizing the important role of the newly deposited Cu and Pb in contributing to the edible parts of crops.

Atmospheric deposition as a source of cadmium and lead to soil-rice system and associated risk assessment

Atmospheric deposition of heavy metals is widely documented and has been connected to adverse ecological and health impacts. The influence of atmospheric deposition on the soil-rice system in a typical urban agglomeration region was studied continuously through a field contrast experiment for two years. The results showed that the Cd and Pb in rice grains is mainly from soil, but Cd and Pb from the atmospheric deposition should be a focus of attention. The bioavailable content of heavy metals in atmospheric deposition is higher than that in corresponding surface soil. Atmospheric deposition contributed 10.8-47.7% of the Cd and Pb in brown rice, and 13.7-60.3% of the Cd and Pb in rice leaves was from atmospheric deposition. In the traffic area, a high deposition site, the contributions of atmospheric depositions to heavy metals in rice plants were higher than those from abandoned mine area and suburban area. Atmospheric deposition also consistently decreased the pH (0.17-0.66) and increased the exchangeable Cd (27.1-62.1%) and Pb (3.3-26.1%) in surface soil. In addition, the health risk index (HRI) of rice consumption was also increased as a result of the different atmospheric depositions of heavy metals, which accounted for 40.0% and 35.5% of Cd and Pb at the high deposition site, respectively. These findings demonstrate the potential influences of atmospheric deposition on the soil-crop system and human health, and can also provide a useful reference for developing the emission control strategies.

Airborne foliar transfer of particular metals in Lactuca sativa L.: translocation, phytotoxicity, and bioaccessibility

The uptake, translocation, and human bioaccessibility of metals originating from atmospheric fine particulate matters (PM) after foliar exposure is not well understood. Lettuce (Lactuca sativa L.) plants were exposed to micronic PbO, CuO, and CdO particulate matters (PMs) by the foliar pathway and mature plants (6 weeks old) were analyzed in terms of: (1) metal accumulation and localization on plant leaf surface, and metal translocation factor (TF) and global enrichment factor (GEF) in the plants; (2) shoot growth, plant dry weight (DW), net photosynthesis (Pn), stomatal conductance (Gs), and fatty acid ratio; (3) metal bioaccessibility in the plants and soil; and (4) the hazard quotient (HQ) associated with consumption of contaminated plants. Substantial levels of metals were observed in the directly exposed edible leaves and newly formed leaves of lettuce, highlighting both the possible metal transfers throughout the plant and the potential for human exposure after plant ingestion. No significant changes were observed in plant biomass after exposure to PbO, CuO, and CdO-PMs. The Gs and fatty acid ratio were increased in leaves after metal exposure. A dilution effect after foliar uptake was suggested which could alleviate metal phytotoxicity to some degree. However, plant shoot growth and Pn were inhibited when the plants are exposed to PbO, and necrosis enriched with Cd was observed on the leaf surface. Gastric bioaccessibility of plant leaves is ranked: Cd > Cu > Pb. Our results highlight a serious health risk of PbO, CuO, and CdO-PMs associated with consumption of vegetables exposed to these metals, even in newly formed leaves in the case of PbO and CdO exposure. Finally, the study highlights the fate and toxicity of metal rich-PMs, especially in the highly populated urban areas which are increasingly cultivated to promote local food.

Dual Role of Metallic Trace Elements in Stress Biology-From Negative to Beneficial Impact on Plants

Heavy metals are an interesting group of trace elements (TEs). Some of them are minutely required for normal plant growth and development, while others have unknown biological actions. They may cause injury when they are applied in an elevated concentration, regardless of the importance for the plant functioning. On the other hand, their application may help to alleviate various abiotic stresses. In this review, both the deleterious and beneficial effects of metallic trace elements from their uptake by roots and leaves, through toxicity, up to the regulation of physiological and molecular mechanisms that are associated with plant protection against stress conditions have been briefly discussed. We have highlighted the involvement of metallic ions in mitigating oxidative stress by the activation of various antioxidant enzymes and emphasized the phenomenon of low-dose stimulation that is caused by non-essential, potentially poisonous elements called hormesis, which is recently one of the most studied issues. Finally, we have described the evolutionary consequences of long-term exposure to metallic elements, resulting in the development of unique assemblages of vegetation, classified as metallophytes, which constitute excellent model systems for research on metal accumulation and tolerance. Taken together, the paper can provide a novel insight into the toxicity concept, since both dose- and genotype-dependent response to the presence of metallic trace elements has been comprehensively explained.

Influence of the residence time of street trees and their soils on trace element contamination in Paris (France)

With the actual increasing interest for urban soils, the evaluation of soil contamination by trace elements and the dynamics of this contamination appear mandatory to preserve plant and thereby human health. Street trees and the associated soil placed in pits located nearby roads could represent convenient indicators of urban and vehicle traffic influences on soils and plants. However, data on these soils remain scarce, many studies investigating park soils rather than street tree soils. Furthermore, trace elements could be one of the main factors causing the observed urban tree decline, while practitioners more and more question the possible reuse of these soils after the death of trees as well as tree litter collected in the streets. We evaluated the contamination in anthropogenic trace elements (TE), namely Zn, Pb, and Cd, of street trees (Tilia tomentosa) and their soils distributed all over Paris (France). Street tree soils are imported from rural areas at the plantation of each new tree so that tree age corresponds to the time of residence of the soil within an urban environment allowing the evaluation of temporal trends on TE concentration in soils and trees. The TE concentration revealed an important soil pollution, especially for the older soils (mean age of 80 years old). The consideration of the residence time of trees and soils in an urban environment evidenced an accumulation of Zn and Pb (ca. 4.5 mg kg^-1 year^-1 and 4 mg kg^-1 year^-1 for Zn and Pb, respectively). However, leaf concentrations in TE were low and indicate that soil-root transfer was not significant compared to the contamination by atmospheric deposition. These results underlined the necessity to deepen the evaluation of the recycling of urban soils or plants submitted to urban contamination.

Size fractions of dust and amount of associated metals on leaf surface and inner wax of 15 plant species at Beijing roadside

To provide more insight into the removal ability of urban air dust and associated metals by plant leaves, and thus guide urban green planning to improve air quality, 15 plant species leaves collected from Beijing roadside were analyzed for size fractions of leaf surface dust (SD) and inner wax dust (WD). Seven associated metals Cd, Cr, Cu, Fe, Mn, Pb and Zn were also measured. Metal Accumulation Index (MAI) was calculated for different species leaves at various dust sizes and soluble forms, respectively. Cluster analysis was used for the plant species and correlations between dust and metal concentrations and for inter-metal concentrations were calculated for both surface and inner wax dust. Mean leaf total dust TD (SD + WD), SD and WD were measured as 1159, 817 and 342 mg m^-2, respectively, with the highest values observed all in Euonymus japonicus. Most species leaves collected larger ratios of SD than WD except Salix babylonica and Robinia pseudoacacia. While SD was presented at all particle size fractions for all plants, nearly all species leaves collected higher proportions of WD >10 µm. Mean metal levels of leaf TD of all species ranged from high to low as Fe > Cr > Zn > Pb > Cu > Mn > Cd, but with different orders for individual species. Metals were observed in all sizes of SD/WD, although the size distributions were various for certain metals. Intercorrelations of metal concentrations in leaf SD/WD were positively significant except Pb, which may have different emission sources. Species Prunus cerasifera f. atropurpurea, Syringa oblata, Malus micromalu, Koelreuteria paniculata and Robinia pseudoacacia may possess better overall metal collection ability due to their relatively higher MAI values, but species Euonymus japonicus, Malus micromalu, Ligustrum x vicaryi and Koelreuteria paniculata were identified as the best choices in removing air dust based on cluster analysis and suggested to be planted at heavy trafficked road site for air quality improvement.

SUNSPACE, A Porous Material to Reduce Air Particulate Matter (PM)

The World Health Organization reports that every year several million people die prematurely due to air pollution. Poor air quality is a by-product of unsustainable policies in transportation, energy, industry, and waste management in the world's most crowded cities. Particulate matter (PM) is one of the major element of polluted air. PM can be composed by organic and inorganic species. In particular, heavy metals present in PM include, lead (Pb), mercury (Hg), cadmium, (Cd), zinc (Zn), nickel (Ni), arsenic (As), and molybdenum (Mo). Currently, vegetation is the only existing sustainable method to reduce anthropogenic PM concentrations in urban environments. In particular, the PM-retention ability of vegetation depends on the surface properties, related to the plant species, leaf and branch density, and leaf micromorphology. In this work, a new hybrid material called SUNSPACE (SUstaiNable materials Synthesized from by-Products and Alginates for Clean air and better Environment) is proposed for air PM entrapment. Candle burning tests are performed to compare SUNSPACE with Hedera Helix L. leafs with respect to their efficacy of reducing coarse and fine PM. The temporal variation of PM10 and PM2.5 in presence of the trapping materials, shows that Hedera Helix L. surface saturates more rapidly. In addition, the capability of SUNSPACE in ultrafine PM trapping is also demonstrated by using titanium dioxide nanoparticles with 25 nm diameter. Scanning electron microscope (SEM) and Transmission electron microscope (TEM) images of SUNSPACE after entrapment tests highlight the presence of collected nanoparticles until to about 0.04 mm in depth from the sample surface. N2 physisorption measurements allow to demonstrate the possibility to SUNSPACE regeneration by washing.

Characterization and Risk Analysis of Metals Associated with Urban Dust in Rawang (Malaysia)

This study was designed to determine the particle size distribution and develop road dust index combining source and transport factors involving road dust for dust pollution quantification in Rawang. Principal component analysis (PCA) was applied to identify possible sources of potentially toxic elements and spot major pollution areas in Rawang. The health risks (carcinogenic and noncarcinogenic) to adults and children were assessed using the hazard index and total lifetime cancer Risk, respectively. A total of 75 road dust samples were collected and particle sizes (1000, 500, 250, 160, 125 and 63 µm) were determined. Concentrations of potentially toxic elements (Cu, Cd, Co, Cr, Pb, Ni, Zn and As) in particle size of 63 µm were analyzed. The results demonstrated that the highest grain size of 250 µm has contributed almost more than 25% of atmospheric particulate pollution. The highest potentially toxic element concentration was Pb (593.3 mg/kg), whereas the lowest was Co (5.6 mg/kg). Road dust index output indicated that pollution risk fell into moderate levels in eastern and northern areas of Rawang. Similarly, PCA results revealed that potentially toxic elements (Cu, Cd, Pb, Zn, Ni and Cr) were linked with anthropogenic sources (urbanization process, industrial and commercial growth, urban traffic congestion) in northern and southern parts of Rawang. Cobalt and As concentrations were explained mainly from natural sources. Noncarcinogenic risk by hazard index value more than 1.0 was indicated for adults and children. Similarly, carcinogenic risk by total lifetime cancer risk value also showed carcinogenic risks among adults and children.

Heavy metals and arsenic content in water along the southern Caspian coasts in Iran

Due to the importance of pollution monitoring in marine ecosystems and lack of a coherent and systematic investigation of heavy metal ions along the southern shores of the Caspian Sea, in the present study, the amount of these metals and As ions in coastal waters along its 780-km-long coast in Iran have been studied. Heavy metals (cobalt, nickel, copper, zinc, cadmium, mercury, lead) and a poisonous metalloid (arsenic) were selected in 59 sampling stations and determined using differential pulse polarography method. The multivariate statistical tools were applied to describe and interpret the experimental data. The overall mean concentrations of studied metals (in microgram per liter; μg L^-1) in the samples were found in the order Zn (10.9) > Ni (7.4) > Cu (5.5) > Pb (1.9) > Hg (1.4) > As (1.3) > Co (1.1) > Cd (0.2). The results when compared with reported international standards confirmed that the sampled waters do contain some of these elements above the suggested maximum permissible limits. Hg and Cu were detected in 54.2 and 72.9% of the samples, almost all above the permissible limits. Ni, Zn, Pb, and Co were detected in 100, 96.6, 93.2, and 88.1%, respectively, while 8.5, 22.0, 3.4, and 1.7% were above the permissible limits. Cd and As were present in 61 and 93% of the samples, and their concentrations were higher than the rate presented by Russian System of Management Chemicals (RSMC). In addition, spatial distribution of heavy metal concentrations showed that Gorgan Bay is an ecosystem serving as a filter, trapping natural and anthropogenic materials that are brought from industrial, commercial, and urbanized areas. The multivariate data analysis reveals that Caspian Sea is contaminated by both anthropogenic as well as pedo-geochemical sources.

Experimental study on the magnetic characteristics of coal fly ash at different combustion temperatures

Two different coals containing iron minerals were combusted in a drop tube furnace at different temperatures. The ash samples collected were analyzed in detail to investigate the transformation behaviors of iron-bearing minerals and the magnetic characteristics of coal fly ash (FA). The vibrating sample magnetometer (VSM) was used to analyze the magnetic characteristics of the ash samples and Mössbauer spectroscopy was used to analyze the iron-bearing components in FA. The results indicate that combustion temperature does not significantly affect the crystals phases formed in FA, but does change the relative content of crystals. With an increase in temperature, the relative content of maghemite (γ-Fe₂O₃) and magnetite (Fe₃O₄) decreases, while the relative content of hematite (α-Fe₂O₃) increases. The rising combustion temperature also results in a decreasing trend on saturation magnetization of FA. Furthermore, there is a significant positive correlation between the equivalent content of iron-bearing minerals and the saturation magnetization of FA, which can be applied to remove the particulates from flue gas more efficiently.