Carbon nanotube amendment for treating dichlorodiphenyltrichloroethane and hexachlorocyclohexane remaining in Dong-ting Lake sediment - An implication for in-situ remediation

Evaluating the metabolic functional profiles of the microbial community and alfalfa (Medicago sativa) traits affected by the presence of carbon nanotubes and antimony in drained and waterlogged sediments

Antimony (Sb) is the ubiquitous re-emerging contaminant greatly accumulated in sediments which has been revealed risky to ecological environment. However, the impacts of Sb (III/V) on microbes and plants in sediments, under different water management with presence of engineering materials are poorly understood. This study conducted sequential incubation of sediments (flooding, draining and planting) with presence of multiwall carbon nanotubes (MWCNTs) and Sb to explore the influence on microbial functional diversity, Sb accumulation and alfalfa traits. Results showed that water management and planting led to greater impacts of sediment enzyme activities and microbial community metabolic function and bioavailable Sb fractions (defined as sum of acid-soluble fraction and reducible fraction, F1 + F2). Available fractions of Sb (V) showed higher correlation to microbial metabolism (r = 0.933) than that of Sb (III) (r = -0.480) in planting stage. MWCNTs with increasing concentrations (0.011%, w/w) positively correlated to microbial community metabolic function in planting stage whereas resulted in decreasing of Sb (III/V) concentrations in alfalfa, although 0.01% MWCNT led to increase of Sb (V) and decrease of Sb (V) by 50.97% and 32.68% respectively. This study provided information for investigating combined ecological impacts of heavy metal and engineering materials under different water managing sediments.

Recent Advances of Nanoremediation Technologies for Soil and Groundwater Remediation: A Review

Nanotechnology has been widely used in many fields including in soil and groundwater remediation. Nanoremediation has emerged as an effective, rapid, and efficient technology for soil and groundwater contaminated with petroleum pollutants and heavy metals. This review provides an overview of the application of nanomaterials for environmental cleanup, such as soil and groundwater remediation. Four types of nanomaterials, namely nanoscale zero-valent iron (nZVI), carbon nanotubes (CNTs), and metallic and magnetic nanoparticles (MNPs), are presented and discussed. In addition, the potential environmental risks of the nanomaterial application in soil remediation are highlighted. Moreover, this review provides insight into the combination of nanoremediation with other remediation technologies. The study demonstrates that nZVI had been widely studied for high-efficiency environmental remediation due to its high reactivity and excellent contaminant immobilization capability. CNTs have received more attention for remediation of organic and inorganic contaminants because of their unique adsorption characteristics. Environmental remediations using metal and MNPs are also favorable due to their facile magnetic separation and unique metal-ion adsorption. The modified nZVI showed less toxicity towards soil bacteria than bare nZVI; thus, modifying or coating nZVI could reduce its ecotoxicity. The combination of nanoremediation with other remediation technology is shown to be a valuable soil remediation technique as the synergetic effects may increase the sustainability of the applied process towards green technology for soil remediation.

A critical review on the formation, fate and degradation of the persistent organic pollutant hexachlorocyclohexane in water systems and waste streams

The environmental impacts of persistent organic pollutants (POPs) is an increasingly prominent topic in the scientific community. POPs are stable chemicals that are accumulated in living beings and can act as endocrine disruptors or carcinogens on prolonged exposure. Although efforts have been taken to minimize or ban the use of certain POPs, their use is still widespread due to their importance in several industries. As a result, it is imperative that POPs in the ecosystem are degraded efficiently and safely in order to avoid long-lasting environmental damage. This review focuses on the degradation techniques of hexachlorocyclohexane (HCH), a pollutant that has strong adverse effects on a variety of organisms. Different technologies such as adsorption, bioremediation and advanced oxidation process have been critically analyzed in this study. All 3 techniques have exhibited near complete removal of HCH under ideal conditions, and the median removal efficiency values for adsorption, bioremediation and advanced oxidation process were found to be 80%, 93% and 82% respectively. However, it must be noted that there is no ideal HCH removal technique and the selection of removal method depends on several factors. Furthermore, the fates of HCH in the environment and challenges faced by HCH degradation have also been explained in this study. The future scope for research in this field has also received attention.

Accumulation characteristics of endosulfan soil residues in soybean and reduction in their phytoavailability by treatment with powdered activated carbon

Powdered activated carbon (PAC) has been utilized for sorptive remediation of environmental sites contaminated with various organic chemicals. In the present study, time-dependent sorption/desorption characteristics of the α- and β-isomers and a sulfate-metabolite of endosulfan (ED) were investigated in PAC-amended soils to determine the optimal PAC amendment dosage. Subsequently, ED phytoavailability to soybean (Glycine max Merr.) plants were examined in the presence or absence of PAC under restricted laboratory conditions. Based on the results of sorption/desorption tests, the optimal dosage of PAC amendment for ED-contaminated soils was determined as 1% (w/w), and at this dosage, all ED residues were sorbed completely onto the PAC-amended soils without any desorption. In soil amended with 1% PAC, the extents of ED accumulated by soybean plants were reduced by 89.4-100.0% within 20 days compared to those extents observed in unamended controls. Moreover, PAC treatment precluded the formation of the toxic metabolite ED-sulfate in either the soil or soybean plants. Therefore, PAC amendment in ED-contaminated soils could be highly effective for limiting uptake of ED into plants from contaminated soil and may be useful as an alternative method to produce safe food resources from contaminated arable soils.

Utilization of nanomaterials for in-situ remediation of heavy metal(loid) contaminated sediments: A review

Heavy metal(loid)s are toxic and non-biodegradable environmental pollutants. The contamination of sediments with heavy metal(loid)s has attracted increasing attention due to the negative environmental effects of heavy metal(loid)s and the development of new remediation techniques for metal(loid) contaminated sediments. As a result of rapid nanotechnology development, nanomaterials are also being increasingly utilized for the remediation of contaminated sediments due to their excellent capacity of immobilizing/adsorbing metal(loid) ions. This review summarizes recent studies that have used various nanomaterials such as nanoscale zero-valent iron (nZVI), stabilizer-modified nZVI, nano apatite based-materials including nano-hydroxyapatite particles (nHAp) and stabilized nano-chlorapatite (nCLAP), carbon nanotubes (CNTs), and titanium dioxide nanoparticles (TiO₂ NPs) for the remediation of heavy metal(loid) contaminated sediments. We also review the analysis of potential mechanisms involved in the interaction of nanomaterials with metal(loid) ions. Subsequently, we discuss the factors affecting the nanoparticle-heavy metal(loid)s interaction, the environmental impacts resulting from the application of nanomaterials, the knowledge gaps, and potential future research.

Effects of multi-walled carbon nanotubes on pyrene adsorption and desorption in soils: The role of soil constituents

Once entering soil, carbon nanotubes (CNTs) can influence the fate of hydrophobic organic compounds (HOCs) in soil due to its strong adsorption capacity. This process may be influenced by the interactions between CNTs and soil constituents. The mechanisms therein were investigated in the present study by examining pyrene adsorption/desorption on one CNTs, two soils (black soil and paddy soil), and mixtures thereof. CNTs' amendment enhanced soil site heterogeneity and adsorption capacity of pyrene while it was less than that predicted by the sum of the individual adsorption on soils and CNTs, which was more obvious at low aqueous concentrations. This could be due to the interactions between soil constituents (dissolved organic matter (DOM) and clays) and CNTs. Modification of CNTs by DOM attenuated pyrene adsorption by 14.9%-66.1%, which was ascribed to occupying of surface adsorption sites, pore blockage of CNTs' aggregates, enhancement of surface polarity, and enhancement of pyrene solubility in aqueous phase. The coexistence of clay (kaolinite) also showed inhibition on pyrene adsorption onto CNTs with a reduction of 19.2%-40.2%. This could be ascribed to that the attachment of clay particles on CNTs' aggregates could cover the surface adsorption sites and enhance the surface polarity of CNTs. The effect of CNTs amendment on pyrene desorption hysteresis differed among soils. The hysteresis index of the black soil doubled after CNTs' amendment while that of paddy soil remained unchanged. The results of this study provide insights into the possible effects of CNTs on the fate of HOCs in real soil environment.