Application of nickel foam-supported Co3O4-Bi2O3 as a heterogeneous catalyst for BPA removal by peroxymonosulfate activation

One-pot synthesis of NiCo-phyllosilicate supported on zeolite for enhanced degradation of antibiotic contaminants

The overuse of antibiotics currently results in the presence of various antibiotics being detected in water bodies, which poses potential risks to human health and the environment. Therefore, it is highly significant to remove antibiotics from water. In this study, we developed novel rod-like NiCo-phyllosilicate hybrid catalysts on calcined natural zeolite (NiCo@C-zeolite) via a facile one-pot process. The presence of the zeolite served as both a silicon source and a support, maintaining a high specific surface area of the NiCo@C-zeolite. Remarkably, NiCo@C-zeolite exhibited outstanding catalytic performance in antibiotic degradation under PMS activation. Within just 5 min, the degradation rate of metronidazole (MNZ) reached 96.14%, ultimately achieving a final degradation rate of 99.28%. Furthermore, we investigated the influence of catalyst dosage, PMS dosage, MNZ concentration, initial pH value, and various inorganic anions on the degradation efficiency of MNZ. The results demonstrated that NiCo@C-zeolite displayed outstanding efficacy in degrading MNZ under diverse conditions and maintained a degradation rate of 94.86% at 60 min after three consecutive cycles of degradation. Free radical quenching experiments revealed that SO•-4played a significant role in the presence of NiCo@C-zeolite-PMS system. These findings indicate that the novel rod-like NiCo-phyllosilicate hybrid catalysts had excellent performance in antibiotic degradation.

Development of efficient and economic Bi2O3/BN/Co3O4 composite photocatalyst: Degradation mechanism, pathway and toxicity study of norfloxacin

The production of cheap, efficient, and stable photocatalysts for degrading antibiotic contaminants remains challenging. Herein, Bi2O3/boron nitride (BN)/Co3O4 ternary composites were synthesized using the impregnation method. The morphological characteristics, structural features, and photochemical properties of the prepared photocatalysts were investigated via X-ray diffraction, Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, scanning electron microscopy, high-resolution transmission electron microscopy, and ultraviolet-visible (Vis) diffuse reflectance spectrum techniques. BN was used as a charge transfer bridge in the ternary composites, which afforded a heterojunction between the two semiconductors. The formation of the heterojunction substantially enhanced the charge separation and improved the photocatalyst performance. The degradation activity of the Bi2O3/BN/Co3O4 ternary composites against norfloxacin (NOR) under Vis light irradiation was investigated. The degradation rate of NOR using 5-wt% Bi2O3/BN/Co3O4 reached 98% in 180 min, indicating excellent photocatalytic performance. The ternary composites also exhibited high photostability with a degradation efficiency of 88.4% after five cycles. Hydroxyl radicals (•OH), superoxide radicals (•O2-), and holes (h+) played a synergistic role in the photocatalytic reaction, where h+ and •O2- were more important than •OH. Consequently, seven intermediates and major photocatalytic degradation pathways were identified. Toxicity experiments showed that the toxicity of the degradation solution to Chlorella pyrenoidosa decreased. Finally, the ecotoxicity of NOR and its intermediates were analyzed using the Toxicity Estimation Software Tool, with most intermediates exhibiting low toxicity.

Efficient benzo(a)pyrene degradation by coal gangue-based catalytic material for peroxymonosulfate activation

A low cost and green peroxymonosulfate (PMS) activation catalyst (CG-Ca-N) was successfully prepared with coal gangue (CG), calcium chloride, and melamine as activator. Under the optimal conditions, the CG-Ca-N can remove 100 % for benzo(a)pyrene (Bap) in an aqueous solution after 20 min and 72.06 % in soil slurry medium within 60 min, which also display excellent reuse ability toward Bap after three times. The removal of Bap is significantly decreased when the initial pH value was greater than 9 and obviously inhibited in the presence of HCO3- or SO42-. The characterization results indicated that the addition of calcium chloride could stabilize and increase the content of pyridinic N during thermal annealing, resulting in the production of •OH, SO4•- and 1O2. Based on electron paramagnetic resonance (EPR) and active radical scavenging experiments, 1O2 could be identified to be the dominant role in Bap degradation. Overall, this work opened a new perspective for the low cost and green PMS catalysts and offered great promise in the practical remediation of organic pollution of groundwater and soil.

Activation of persulfate for the degradation of ethyl-parathion in soil: Combined effects of microwave with biochar

Sulfate radical (SO4•-), formed by persulfate (PS) activation during advanced oxidation process (AOPs), can be used for the remediation of organic contaminated soil. However, the role of biochar and microwave (MW) in the activation of PS is not fully understood, especially the corresponding mechanism. Herein, biochar combined with MW was used to activate PS for the remediation of ethyl-parathion (PTH)-polluted soil. The dynamic evolutions of PTH under different conditions, such as biochar content, particle size, reaction temperature, and the degradation mechanisms of PTH were also systematically investigated. Significant enhancement performance on PTH removal was observed after adding biochar, which was 88.78% within 80 min. Meanwhile, activating temperature exhibited remarkable abilities to activate PS for PTH removal. The higher content of adsorption sites in nano-biochar facilitated the removal of PTH. Furthermore, chemical probe tests coupled with quenching experiments confirmed that the decomposition of PS into active species, such as SO4•-, •OH, O2•- and 1O2, contributed to the removal of PTH in biochar combined with MW system, which could oxidize PTH into oxidative products, including paraoxon, 4-ethylphenol, and hydroquinone. The results of this study provide valuable insights into the synergistic effects of biochar and MW in the PS activation, which is helpful for the potential application of biochar materials combined with MW-activated PS in the remediation of pesticide-polluted soils.

Novel electrospun bead-like Ag2MoO4 nanofibers coated on Ni foam for visible light-driven heterogeneous photocatalysis and high-performance supercapacitor electrodes

Novel Ag2MoO4 nanocomposite fibers were designed to enhance the photocatalytic response and supercapacitor performance of MoO3 grown via the sol-gel electrospinning technique. The Ag2MoO4 nanocomposite fibers exhibit a high specific surface area of 49.3 m2 g-1 comprising nanobeads that aggregate in the fibrous structure. The photodegradation efficiency of Ag2MoO4 was evaluated as 62% under visible light irradiation which improved to 71% with heterogeneous photocatalysis. The Ag2MoO4@Ni foam exhibited a low Rct of 19.6 Ω, and an enhanced specific capacitance of 1445 F g-1 was obtained at 1 A g-1, with 93% of its initial capacitance remaining after 5000 cycles. In addition, the Ag2MoO4//activated carbon asymmetric supercapacitor possesses an excellent energy density of 76.6 W h kg-1 at 743.2 W kg-1 and a noteworthy cycling durability of 91% after 5000 cycles. Our findings demonstrate that the electrospun Ag2MoO4@Ni foam is an important and inexpensive electrode material for supercapacitor applications and visible light-driven heterogeneous photocatalysis, drawing on the synergic effects of Ag and Mo to exhibit much better performance.

Rapid removal of high-concentration Rhodamine B by peroxymonosulfate activated with Co3O4-Fe3O4 composite loaded on rice straw biochar

In this study, rice straw biochar modified with Co₃O₄-Fe₃O₄ (RSBC@Co₃O₄-Fe₃O₄) was successfully prepared via calcinating oxalate coprecipitation precursor and employed as a catalyst to activate peroxymonosulfate (PMS) for the treatment of Rhodamine B (RhB)-simulated wastewater. The results indicated that RSBC@Co₃O₄-Fe₃O₄ exhibited high catalytic performance due to the synergy between Co₃O₄ and Fe₃O₄ doping into RSBC. Approximately 98% of RhB (180 mg/L) was degraded in the RSBC@Co₃O₄-Fe₃O₄/PMS system at initial pH 7 within 15 min. The degradation efficiency of RhB maintained over 90% after the fourth cycle, illustrating that RSBC@Co₃O₄-Fe₃O₄ displayed excellent stability and reusability. The primary reactive oxygen species (ROS) answerable for the degradation of RhB were ¹O₂, •OH, and SO₄^•-. Moreover, the intermediates involved in the degradation of RhB were identified and the possible degradation pathways were deduced. This work can provide a new approach to explore Co-based and BC-based catalysts for the degradation of organic pollutants.

Peroxymonosulfate Activation by CuO-Fe2O3-Modified Ni Foam: A 1O2 Dominated Process for Efficient and Stable Degradation of Tetracycline

The post-separation of powder catalysts restricts the practical application of peroxymonosulfate (PMS)-based advanced oxidation technology. Hence, we fabricated CuO-Fe2O3-modified Ni foam (CFO-NF) using a facile hydrothermal method for an efficient PMS activation. The CFO-NF/PMS system could achieve a 97.9% tetracycline hydrochloride (TC) removal efficiency in 60 min with four pieces of CFO-NF and 0.4 mmol L−1 of PMS. The removal efficiency was maintained at ˃85% even after five cycles, indicating the excellent stability of CFO-NF composites. The conversion among Fe(III)/Fe(II), Cu(II)/Cu(I), and Ni(III)/Ni(II) accelerated the PMS decomposition, verifying the synergy between CuO-Fe2O3 and Ni foam. The trapping experiments and EPR detection confirmed that abundant active species (•OH, SO4•−, O2•−, and 1O2) were produced in the CFO-NF/PMS system, accounting for the existence of radical pathways and a non-radical pathway, in which 1O2 (non-radical pathway) was dominated. This study developed a novel CuO-Fe2O3-modified Ni foam with a superior PMS activation performance, a high stability, and a recoverability for eliminating refractory organic pollutants.

Cobalt-bismuth bimetallic composite anchored on carbon derived from cigarette butts as peroxymonosulfate activator for rapid removal of chloramphenicol

Chloramphenicol (CAP) is a typical kind of antibiotics, which has posed a severe threat to nature and human beings due to its wide application. In this study, cobalt-bismuth bimetallic composite anchored on carbon derived from cigarette butts (Co-Bi@CCB) was prepared to activate peroxymonosulfate (PMS) for the removal of CAP. Our results demonstrated Co-Bi@CCB not only possessed excellent catalytic performance, but also significantly limited metal ions dissolution. Over 98% of CAP (10 mg/L) was degraded in the presence of Co-Bi@CCB (0.05 g/L) and PMS (1 mM) within 20 min at pH = 7. Quenching tests and electron paramagnetic resonance (EPR) spectrometry confirmed that SO₄^•-, ^•OH, and ¹O₂ led to the rapid decomposition of CAP. Combined with X-ray photoelectron spectroscopy (XPS) of Co-Bi@CCB before and after reaction, the mechanism of PMS activation was deduced. Finally, the possible pathways of CAP degradation was further speculated according to the intermediates determination by high-performance liquid chromatography equipped with high resolution mass spectrometer (HPLC-HRMS). Thus, the present study provides a new strategy to utilize discarded cigarette butts (recycled materials) as a carrier to fabricate novel and efficient catalysts to activate PMS for the removal of organic contaminants.

Facile one-step preparation of Co and Ce doped TiO2 in visible light PMS activation for PAHs degradation

In this work, Co and Ce doped TiO₂ (CoCeTi) with low content of Co and Ce was successfully prepared by a facile one-step sol-gel solvothermal process for activating Peroxymonosulfate (PMS) to degrade Polycyclic aromatic hydrocarbons (PAHs). The phenanthrene degradation rate was 98.2% effectively in 15 min by CoCeTi (50.0 mg/L) activation PMS (0.50 mmol/L) under visible light. SO₄^•-, O₂^•-, h⁺ and ¹O₂ were verified as the dominant reactive species for PAHs degradation. The collective effect of CoCeTi, PMS and visible light irradiation has been discussed. The possible phenanthrene degradation pathway was proposed through intermediates analysis. CoCeTi composed of Co₃O₄, CeO₂ and TiO₂ was confirmed. Outstandingly, CoCeTi/PMS/visible light system has very low cobalt (0.036 mg/L) and cerium (0.27 mg/L) leaching. Due to CoCeTi having good activated PMS properties and other excellent characteristics, it has potential application for PAHs or other organic pollutants degradation.

Application of pier waste sludge for catalytic activation of proxy-monosulfate and phenol elimination from a petrochemical wastewater

This investigation aimed to remove phenol from real wastewater (taken from a petrochemical company) by activating peroxy-monosulfate (PMS) using catalysts extracted from pier waste sludge. The physical and chemical properties of the catalyst were evaluated by FE-SEM/EDS, XRD, FTIR, and TGA/DTG tests. The functional groups of O-H, C-H, CO₃^2-, C-H, C-O, N-H, and C-N were identified on the catalyst surface. Also, the crystallinity of the catalyst before and after reaction with petrochemical wastewater was 103.4 nm and 55.8 nm, respectively. Operational parameters of pH (3-9), catalyst dose (0-100 mg/L), phenol concentration (50-250 mg/L), and PMS concentration (0-250 mg/L) were tested to remove phenol. The highest phenol removal rate (94%) was obtained at pH=3, catalyst dose of 80 mg/L, phenol concentration of 50 mg/L, PMS concentration of 150 mg/L, and contact time of 150 min. Phenol decomposition in petrochemical wastewater followed the first-order kinetics (k> 0.008 min^-1, R²> 0.94). Changes in pH factor were very effective on phenol removal efficiency, and maximum efficiency (≈83%) was achieved in pH 3. The catalyst stability test was performed for up to five cycles, and phenol removal in the fifth cycle was reduced to 42%. Also, the energy consumption in this study was 77.69 kW h/m³. According to the results, the pier waste sludge catalyst/PMS system is a critical process for eliminating phenol from petrochemical wastewater.

Unraveling spongy Co3O4 mediated activation of peroxymonosulfate: Overlooked involvement of instantaneously produced high-valent-cobalt-oxo

Peroxymonosulfate (PMS) activation induced by tricobalt tetroxide spinel (Co₃O₄) has been confirmed as a typical Haber-Weiss reaction, while free radicals were once considered as the dominated reactive species in the previous studies. However, the catalytic mechanism of the spongy Co₃O₄ driven PMS activation was surprisingly found as a radical/nonradical mixed process rather than a pure radical process in the present work. The important role of sulfate radical (SO₄^-) was confirmed through the quenching experiments. Despite the inhibition of furfuryl alcohol (FFA) and 1,4-benzoquinone (BQ) on degradation was generally accepted as the evidence to support the existence of ¹O₂ and O₂^-, additional experiments using methyl phenyl sulfoxide (PMSO) as the indicator indeed verified high-valent-cobalt-oxo rather than ¹O₂ and O₂^- dominated the very early reaction stage. Notably, instead of homogeneous Co³⁺, heterogeneous Co(IV) = O on catalyst surface was believed to be responsible for the oxidation of organics. Spongy Co₃O₄ not only possessed stronger catalytic ability than commercial Co₃O₄ (k_{[spongy Co3O4]} = 0.74 min^-1, k_[Co3O4] = 0.08 min^-1), but also owned preferable stability. The performance of catalytic system was barely affected by the solution pH under the near neutral condition. Besides, little suppression of the widely existing anions on the degradation indicated the potential application of spongy Co₃O₄/PMS system. This study provides a reliable oxidation technology for the removal of organic pollutants, and sheds new light on the cobalt oxide triggered PMS activation process.

A Review of Persulfate Activation by Magnetic Catalysts to Degrade Organic Contaminants: Mechanisms and Applications

All kinds of refractory organic pollutants in environmental water pose a serious threat to human health and ecosystems. In recent decades, sulfate radical-based advanced oxidation processes (SR-AOPs) have attracted extensive attention in the removal of these organic pollutants due to their high redox potential and unique selectivity. This review first introduces persulfate activation by magnetic catalysts to degrade organic contaminants. We present the advances and classifications in the generation of sulfate radicals using magnetic catalysts. Subsequently, the degradation mechanisms in magnetic catalysts activated persulfate system are summarized and discussed. After an integrated presentation of magnetic catalysts in SR-AOPs, we discuss the application of persulfate activation by magnetic catalysts in the treatment of wastewater, landfill leachate, biological waste sludge, and soil containing organic pollutants. Finally, the current challenges and perspectives of magnetic catalysts that activated persulfate systems are summarized and put forward.

Multimetallic CuCoNi Oxide Nanowires In Situ Grown on a Nickel Foam Substrate Catalyze Persulfate Activation via Mediating Electron Transfer

In situ growth of nanostructures on substrates is a strategy for designing highly efficient catalytic materials. Herein, multimetallic CuCoNi oxide nanowires are synthesized in situ on a three-dimensional nickel foam (NF) substrate (CuCoNi-NF) by a hydrothermal method and applied to peroxydisulfate (PDS) activation as immobilized catalysts. The catalytic performance of CuCoNi-NF is evaluated through the degradation of organic pollutants such as bisphenol A (BPA) and practical wastewater. The results indicate that the NF not only plays an important role as the substrate support but also serves as an internal Ni source for material fabrication. CuCoNi-NF exhibits high activity and stability during PDS activation as it mediates electron transfer from BPA to PDS. CuCoNi-NF first donates electrons to PDS to arrive at an oxidized state and subsequently deprives electrons from BPA to return to the initial state. CuCoNi-NF maintains high catalytic activity in the pH range of 5.2-9.2, adapts to a high ionic strength up to 100 mM, and resists background HCO₃^- and humic acid. Meanwhile, 76.6% of the total organic carbon can be removed from packaging wastewater by CuCoNi-NF-catalyzed PDS activation. This immobilized catalyst shows promising potential in wastewater treatment, well addressing the separation and recovery of conventional powdered catalysts.

A comprehensive review on BPA degradation by heterogeneous Fenton-like processes

Synthetic organic pollutants emanating continuously in the ecosystem have become a global concern because of their toxicity and persistent nature. Bisphenol A (BPA) is one such pollutant which threatens public health and safety. It is a monomer used in manufacturing plastics, polycarbonate resins, epoxy resins and is a well-recognised endocrine disruptor mimicking estrogen. BPA leaches into food and beverages stored in containers causing contamination issues. Its widespread exposure and potential toxicity is an environmental health concern. In this review, a systematic investigation has been carried out on the heterogeneous catalysts used for Fenton-like processes for BPA degradation. The Fenton-like reaction is one such reaction that is used for wastewater remediation purposes. The reaction advances through the generation of powerful oxidizing radicals like •OH and SO₄^•- in the presence of a suitable catalyst. The application of various Fenton catalysts, with their distinguished morphological characteristics, oxidizing properties, toxicity analysis, and the present state of the art of BPA degradation by these catalysts, have been documented in the current work. This review also highlights a few challenges and prospects for analysing degradation products of landfill leachate.

Copper Foam as Active Catalysts for the Borylation of α, β-Unsaturated Compounds

The use of simple, inexpensive, and efficient methods to construct carbon–boron and carbon–oxygen bonds has been a hot research topic in organic synthesis. We demonstrated that the desired β-boronic acid products can be obtained under mild conditions using copper foam as an efficient heterogeneous catalyst. The structure of copper foam before and after the reaction was investigated by polarized light microscopy (PM), scanning electron microscopy (SEM), and transmission electron microscopy (TEM), and the results have shown that the structure of the catalyst copper foam remained unchanged before and after the reaction. The XPS test results showed that the Cu(0) content increased after the reaction, indicating that copper may be involved in the boron addition reaction. The specific optimization conditions were as follows: CH₃COCH₃ and H₂O were used as mixed solvents, 4-methoxychalcone was used as the raw material, 8 mg of catalyst was used and the reaction was carried out at room temperature and under air for 10 h. The yield of the product obtained was up to 92%, and the catalytic efficiency of the catalytic material remained largely unchanged after five cycles of use.

Peroxymonosulfate activation by oxygen vacancies-enriched MXene nano-Co3O4 co-catalyst for efficient degradation of refractory organic matter: Efficiency, mechanism, and stability

Cobalt-based catalysts have been widely explored in the degradation of organic pollutants based on peroxymonosulfate (PMS) activation. Herein, we report an MXene nano-Co₃O₄ co-catalyst enriched with oxygen vacancies (O_v) and steadily fixed in nickel foam (NF) plates, which is used as an efficient and stable PMS activator for the removal of 1,4-dioxane (1,4-D). Ti originating from MXene was doped into the Co₃O₄ crystal, generating large amounts of O_v, which could provide more active sites to enhance PMS activation and facilitate the transformation of Co²⁺ and Co³⁺, causing a high stability. As a result, the 1,4-D removal efficiency of the NF/MXene-Co₃O₄/PMS system (k_app: 2.41 min^-1) was about four times higher than that of the NF/Co₃O₄/PMS system (k_app: 0.62 min^-1). In addition, singlet oxygen was the predominant reactive oxygen species. Notably, the 1,4-D removal of the NF/MXene-Co₃O₄/PMS system was over 95% after 20 h operation in the single-pass filtration mode with only 3.72% accumulative Co leaching, showing excellent stability and reusability of NF/MXene-Co₃O₄. This work provides a defect engineering strategy to design a robust and stable catalytic system for water treatment, which expands the application of MXene in the field of environmental remediation.

Enhancement strategies for efficient activation of persulfate by heterogeneous cobalt-containing catalysts: A review

As a clean and efficient technology for the degradation of organic contaminants, sulfate radical based advanced oxidation processes (SR-AOPs) have attracted more and more attention in the past decades. Cobalt is regarded as the most reactive and efficient non-noble metal catalyst for the activation of persulfate including peroxymonosulfate (PMS) and peroxydisulfate (PDS) to produce sulfate radicals. Due to the limitations of homogeneous catalytic systems, the heterogeneous cobalt-containing catalysts have been emerged and rapidly developed. Various strategies have been schemed to further enhance the activation ability of persulfate by heterogeneous cobalt-containing catalysts. This paper provides an overview on the recent progress in enhancement strategies for the highly efficient activation of persulfate by heterogeneous cobalt-containing catalysts. With a brief introduction on the chemistry and feature of sulfate radical reactions catalyzed by homogeneous Co²⁺/Co³⁺ species, the main strategies for enhancing persulfate activation by heterogeneous cobalt-containing catalysts are summarized, such as surface and morphology design, multiple reactive centers design, organic-inorganic hybrids and heterostructure composites. Future perspectives of heterogeneous SR-AOPs systems catalyzed by cobalt-containing catalysts are outlined.

Dual-functional Z-scheme CdSe/Se/BiOBr photocatalyst: Generation of hydrogen peroxide and efficient degradation of ciprofloxacin

The major challenges of clean energy and environmental pollution have resulted in the development of photocatalysis technologies for energy conversion and the degradation of refractory pollutants. Herein, a novel CdSe/Se/BiOBr hydrangea-like photocatalyst was used to produce hydrogen peroxide (H₂O₂) and degrade ciprofloxacin (CIP). The Z-scheme heterojunction structure of the photocatalyst and the doping of selenium (Se) led to the efficient separation of electron-hole pairs and charge transfer. The optimized sample of 2 wt% CdSe/Se/BiOBr produced 142.15 mg·L^-1 rate of H₂O₂, which was much higher than that produced by pure BiOBr (89.4 mg·L^-1) or CdSe/Se (10.9 mg·L^-1). Additionally, almost 100 % of CIP was degraded within 30 min, with a first order rate constant of nearly 5.35 times that of pure BiOBr and 81.44 times that of pure CdSe/Se. The excellent removal efficiency of CIP from natural water matrices confirmed that the composites are promising for the removal of contaminants from natural waterways. Based on trapping experiments, electron spin resonance spectra (ESR) spectroscopy, and density functional theory (DFT) calculations, the photocatalytic mechanisms of H₂O₂ and CIP degradation by the Z-scheme CdSe/Se/BiOBr composites were proposed. Overall, the dual-functional CdSe/Se/BiOBr composite could potentially be applied for photocatalytic production of H₂O₂ and treatment of organic pollutants in water.

Relying on the non-radical degradation of oxytetracycline by peroxymonosulfate activated with a magnetic Cu/Fe composite: performance and mechanism

CuFe-1 nanoparticles were successfully synthesized, and they could effectively activate peroxymonosulfate to assist the degradation of oxytetracycline.

A novel CoNi7O8/MnO2 nanocomposite supported on Ni foam as a peroxymonosulfate activator for the highly efficient singlet oxygen mediated removal of methylene blue

Novel CoNi7O8/MnO2 supported on Ni foam presented excellent catalytic activity toward PMS activation, with 100% MB removal achieved within 15 min.

Complete and rapid degradation of glyphosate with Fe3Ce1Ox catalyst for peroxymonosulfate activation at room temperature

Glyphosate, a common broad-spectrum herbicide, is a serious environmental pollutant that causes a significant threat to humans. Hence, there is a pressing task to remove glyphosate from the environment. Here, we report an excellent Fe3Ce1Ox catalyst synthesized via the one-step co-precipitation method for activating peroxymonosulfate (PMS) to degrade glyphosate at 25 °C. As a result, glyphosate is completely degraded with a high degradation rate of 400 mg L-1·h-1, and the TOC and TN removals are 85.6% and 80.8%, respectively. As proven by systematic characterizations, the Fe-Ce synergistic effect plays a significant role in promoting PMS activation. The main reactive oxygen species for glyphosate oxidation are surface-bound SO4-· and ·OH, produced by activating PMS by electron transfer between Fe2+/Fe3+ and Ce3+/Ce4+ of Fe3Ce1Ox. In light of the products determined, the possible degradation process of glyphosate is also speculated: C-N and C-P bonds of glyphosate molecules are attacked to form aminomethylphosphonic acid (AMPA) and orthophosphate (PO43-) by surface-bound SO4-· and ·OH that continuously mineralize and dephosphorylate AMPA to generate small molecules and inorganic ions, such as H2O and PO43-. The results of this work suggest that Fe3Ce1Ox/PMS could provide a potential candidate for efficiently removing organic compounds containing nitrogen or phosphorus from wastewater.

Fabrication of Co3O4-Bi2O3-Ti catalytic membrane for efficient degradation of organic pollutants in water by peroxymonosulfate activation

In this study, a functionalized Co₃O₄-Bi₂O₃-Ti catalytic membrane (CBO-Ti-M) was prepared and applied for removing organic pollutants via activating peroxymonosulfate (PMS) in the dead-end filtration mode. Characterizations including scanning electron microcopy (SEM), X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) showed that the Co₃O₄-Bi₂O₃ catalyst was successfully supported on the Ti membrane. The CBO-Ti-M /PMS system could efficiently remove various organic pollutants such as sulfamethoxazole, methyl orange, bisphenol A and methylene blue, achieving removal efficiencies of 98.0%-99.5%. The effects of PMS concentration, flow rate and solution environment on degradation efficiency were investigated in detail. Furthermore, quenching experiments, electron spin resonance (ESR) and in-situ open circuit potential (OCP) tests collectively demonstrated that singlet oxygen as well as the non-radical electron transfer pathway mainly contributed in the reaction mechanism. The synergistic effect of Co and Bi was illustrated according to XPS results, and the possible degradation pathway of MB was proposed based on LC-MS analysis. Reusability test showed that pollutant removal efficiency with the CBO-Ti-M /PMS system remained stable in four runs and limited metal leaching was observed.

Bamboo-like N-doped carbon nanotube-confined cobalt as an efficient and robust catalyst for activating monopersulfate to degrade bisphenol A

As bisphenol A (BPA) is an extensively used chemical for manufacturing plastic products, discharge of BPA into the environment has caused serious threats to ecology. Therefore, -based chemical oxidation methods have been employed for eliminating BPA. Because monopersulfate (MNP) has become a popular reagent for obtaining , and Co is the most efficient metal for activating MNP, it is critical to develop heterogeneous Co catalysts for easier implementation and recovery. Herein, a unique Co-based catalyst is proposed by utilizing tubular-structured N-doped carbon substrates, derived dicyandiamide (DCDA), to confine Co nanoparticles (NPs). Through simple pyrolysis of a mixture of Co/DCDA, DCDA would be transformed into N-doped carbon nanotubes (CNT) to wrap the resultant Co NP, and, interestingly, this N-doped CNT would exhibit a special bamboo-like morphology. More importantly, as Co NPs are mono-dispersed and singly-confined in N-doped CNTs, forming CoCNT, CoCNT exhibits significantly higher catalytic activities than Co₃O₄, for activating MNP to degrade BPA. The enhancement of catalytic activities in CoCNT would be possibly ascribed to the synergistic effects between Co NP and the N-doped CNT which not only acts as the support/protection but also provides active sites. Therefore, CoCNT + MNP could lead to a much lower E_a (i.e., 13.8 kJ/mol) of BPA degradation than the reported E_a values. Besides, CoCNT is still effective for eliminating BPA even in the presence of high-concentration NaCl and surfactants. CoCNT is also reusable over many cycles and retains its catalytic activity with 100% BPA removal, demonstrating that CoCNT is an advantageous and robust catalyst for MNP activation.

A Comprehensive Assessment of Catalytic Performances of Mn2O3 Nanoparticles for Peroxymonosulfate Activation during Bisphenol A Degradation

Catalytic performances of Mn2O3 nanoparticles for peroxymonosulfate (PMS) activation in bisphenol A (BPA) degradation were comprehensively investigated in this study. Experimental results showed that 10 mg/L BPA could be 100% degraded within 20 min with the dosages of 0.2 g/L Mn2O3 and 0.1 mM PMS. Moreover, Mn2O3 showed remarkable activity in activation of PMS and excellent adaptability in various real water matrices, including river water, tap water and secondary effluents. Based on the radical detection and scavenging experiments, it was found that both radical and non-radical oxidation contributed to the degradation of BPA and 1O2 was the dominant species in the degradation compared to •OH, SO4•− and O2•−. A total of 15 transformation products were identified by LC/MS-MS during BPA degradation in the Mn2O3/PMS system, and degradation pathways via three routes are proposed. Compared with lab-made catalysts reported in the literature, the Mn2O3 catalyst demonstrated its superiority in terms of its high TOC removal, low PMS consumption and fast degradation rate for BPA.

Surface dual redox cycles of Mn(III)/Mn(IV) and Cu(I)/Cu(II) for heterogeneous peroxymonosulfate activation to degrade diclofenac: Performance, mechanism and toxicity assessment

Advanced oxidation processes (AOPs) based on heterogeneous catalytic activated peroxymonosulfate (PMS) have been becoming alternatives to conventional wastewater treatment technologies to directly degrade chemical contaminants. To build dual/multi redox cycles of different metal ions may be an effective means for better PMS activation. Herein, this study designed Mn₃O₄/CuBi₂O₄ with dual redox cycles of Mn(III)/Mn(IV) and Cu(I)/Cu(II) to activate PMS for efficiently decomposing and mineralizing diclofenac sodium (DCF). Under optimal reaction conditions, DCF (50 mg/L) was degraded totally within 10 min, and TOC removal rate reached up to 74.3%. The possible mechanism of PMS activation by Mn₃O₄/CuBi₂O₄ was proposed, wherein dual redox cycles of Mn(III)/Mn(IV) and Cu(I)/Cu(II) on Mn₃O₄/CuBi₂O₄ effectively facilitated PMS activation to generate ·O₂^-, ¹O₂, SO₄·^- and ·OH, which was responsible for DCF degradation. Moreover, combined with degraded products detected by high resolution liquid chromatography coupled to mass spectrometry and corresponding toxic assessment results, the possible degradation pathways of DCF were proposed and the relative toxicity of degraded products was evaluated. This work may be useful for developing stronger heterogeneous activators of PMS to construct more efficient AOPs for purifying wastewater.

Efficient degradation of roxarsone and simultaneous in-situ adsorption of secondary inorganic arsenic by a combination of Co3O4-Y2O3 and peroxymonosulfate

Roxarsone (ROX), as one of aromatic organoarsenic compounds (AOCs), is extensively used in livestock industry, which tends to transform into high-toxic inorganic arsenic in environments. Herein, a bifunctional Co₃O₄-Y₂O₃, possessing extremely excellent catalytic and adsorption performance due to the synergy of Co₃O₄ and Y₂O₃, was designed and employed to activate peroxymonosulfate (PMS) for the elimination of ROX and the simultaneous in-situ adsorption of secondary inorganic arsenic, in which Co₃O₄ acted as the primary catalyst, and Y₂O₃ served as the main adsorbent. 50 μM (3.75 mg-As/L) of ROX was almost completely degraded, coupled with the conversion of As(III) to As(V) in the system of Co₃O₄-Y₂O₃ (0.2 g/L) and PMS (0.5 mM) within 15 min at initial pH 7. Meanwhile, > 99.3% of the secondary As(V) would be removed within 120 min. The reactive oxygen species (ROS) were identified to be ^•OH, SO₄^•-, and ¹O₂, which were responsible for the ROX degradation and the formation of As(V). Simultaneously, the produced As(V) were effectively adsorbed via the ligand/anion exchange with surface -OH and CO₃^2- anions of Co₃O₄-Y₂O₃. The possible degradation pathways of ROX were further proposed on the basis of the intermediates identification. Our findings may provide an insight into the degradation of AOCs and the simultaneous removal of secondary inorganic arsenic via the PMS activation with Co₃O₄-Y₂O₃.

Enhanced peroxymonosulfate activation over heterogeneous catalyst Cu0.76Co2.24O4/SBA-15 for efficient degradation of sulfapyridine antibiotic

The largest source of resistant bacteria or viruses is the overuse and misuse of antibiotics in humans and animals. These resistant bacteria or viruses may evolve into superbacteria or superviruses, which causes global plague. Therefore, it is significant to find a highly efficiency and low-cost method to eliminate antibiotics in water environment from inappropriate discharge. Here, a highly active and highly stable heterogeneous catalyst, Cu0.76Co2.24O4/SBA-15 (CCS) was prepared for peroxymonosulfate (PMS) activation in aim of decomposing persistent sulfapyridine (SPD). The reaction mechanism was thoroughly investigated via in situ quenching test and in situ electron paramagnetic resonance. Four reactive species, SO4·-, O2·-, 1O2 and ·OH were generated in Cu0.76Co2.24O4/SBA-15/PMS (CCSP) system. The SO4·- and O2·- were dominant active species responsible for SPD degradation. Co(Ⅱ)↔Co(Ⅲ)↔Co(Ⅱ) redox reaction cycle was constructed due to the different redox potential of Co(Ⅱ)/Co(Ⅲ), HSO5-/SO4∙-, and HSO5-/SO5∙-. Interestingly, Cu(Ⅰ) could urge the redox reaction cycle for PMS activation to be more thermodynamically feasible. Therefore, CCS possessed a highly catalytic activity and excellent stability. Meanwhile, the anions interference test indicated Cl-, NO3-, HCO3-, and H2PO4- had almost no inhibitory effect on SPD degradation over this catalytic system. We sincerely expected that this catalyst system would be applied extensively into antibiotics degradation in real water bodies.

Fabrication of electrochemically-modified BiVO4-MoS2-Co3O4composite film for bisphenol A degradation

A new electrochemically-modified BiVO₄-MoS₂-Co₃O₄ (represented as E-BiVO₄-MoS₂-Co₃O₄) thin film electrode was successfully synthesized for environmental application. MoS₂ and Co₃O₄ were grown on the surface of BiVO₄ to obtain BiVO₄-MoS₂-Co₃O₄. E-BiVO₄-MoS₂-Co₃O₄ film was achieved by further electrochemical treatment of BiVO₄-MoS₂-Co₃O₄. The as-prepared E-BiVO₄-MoS₂-Co₃O₄ exhibited significantly enhanced photoelectrocatalytic activity. The photocurrent density of E-BiVO₄-MoS₂-Co₃O₄ thin film is 6.6 times that of BiVO₄ under visible light irradiation. The degradation efficiency of E-BiVO₄-MoS₂-Co₃O₄ for bisphenol A pollutant was 81.56% in photoelectrochemical process. The pseudo-first order reaction rate constant of E-BiVO₄-MoS₂-Co₃O₄ film is 3.22 times higher than that of BiVO₄. And its reaction rate constant in photoelectrocatalytic process is 14.5 times or 2 times that in photocatalytic or electrocatalytic process, respectively. The improved performance of E-BiVO₄-MoS₂-Co₃O₄ was attributed to the synergetic effects of the reduction of interfacial charge transfer resistance, the formation of oxygen vacancies and sub-stoichiometric metal oxides and higher separation efficiency of photogenerated electron-hole pairs. E-BiVO₄-MoS₂-Co₃O₄ is a promising composite material for pollutants removal.

Recycling application of modified waste electrolytic manganese anode slag as efficient catalyst for PMS activation

Electrolytic manganese anode slag (EMAS) is the waste residue produced by electrolytic manganese metal industry. At present, no mature recycling system has been established, which causes a waste of resources and threatens the environment. Therefore, the resource utilization of EMAS has attracted increased attention. In this paper, the in-situ resource utilization of EMAS can be realized by pickling treatment was reported. Specifically, EMAS after pickling treatment (PEMAS) was first used as catalyst to activate PMS to degrade tetrachlorophenol (4-CP). Pickling could remove the inert inorganic components on EMAS and increase the specific surface area, pore volume and Mn distribution of the catalyst, thus improving the catalytic performance of the catalyst. Under the conditions of 4-CP of 40 ppm, PMS of 1 mM and PEMAS of 0.3 g L^-1, 85% of 4-CP could be degraded within 50 min. Mechanism studies proved that the main active species were O₂^- and ¹O₂. Some O₂^- contributed to the generation of ¹O₂ and some O₂^- directly contributed to the degradation of 4-CP. During the reaction, the valence state of Mn transformed between Mn(III)/Mn(IV) and Mn(II)/Mn(III) and kept the cycle. Moreover, PEMAS/PMS system exhibited excellent independence of the solution pH, resistance to the versatile inorganic ions and background organic matters, and stability of recycling. In a word, this study has achieved the resource utilization of EMAS and the goal of treating waste with waste, which is a win-win strategy of economic and environmental benefits.

Synthesis of coal fly ash supported MnO2 for the enhanced degradation of Acid Red 73 in the presence of peroxymonosulfate

In this study, coal fly ash supported MnO₂ (CFA@MnO₂) was synthesized as heterocatalyst for the activation of peroxymonosulfate to degrade Acid Red 73 (AR73). The synthesized catalyst was characterized by X-Ray Fluorescence Spectrometer (XRF), X-ray powder diffraction (XRD), Scanning electron microscope (SEM), X-ray photoelectron spectroscopy (XPS) and Brunauer-Emmett-Teller (BET). The composite of CFA@MnO₂ possesses a large surface area of 74.59 m²/g. In the catalytic experiment, CFA@MnO₂ exhibits excellent catalytic performance with 99.13% AR73 removed within 40 min with a high kinetic rate constant of 0.124 min^-1, 5.49 times higher than that of pure MnO₂. The operating parameters of CFA@MnO₂-based fenton catalytic system were discussed, including MnO₂ loading, solution pH, PMS dosage and temperature. The catalyst maintained a relatively high removal rate (>85%) over 5 cycles and degradation intermediates are detected on the catalyst surface after cycled via XPS analysis. The degradation mechanism was investigated by quenching experiments and Electron Paramagnetic Resonance technology. The surface-bound ^·OH and SO₄ ^·- are considered as the main active radicals in the degradation process. The composite of CFA@MnO₂ provides a low-cost and efficient alternative for the catalytic oxidation of organic pollutants.

Synthesis and catalytic utilization of bimetallic systems for wastewater remediation: A review

The environment is affected by agricultural, domestic, and industrial activities that lead to drastic problems such as global warming and wastewater generation. Wastewater pollution is of public concern, making the treatment of persistent pollutants in water and wastewater highly imperative. Several conventional treatment technologies (physicochemical processes, biological degradation, and oxidative processes) have been applied to water and wastewater remediation, but each has numerous limitations. To address this issue, treatment using bimetallic systems has been extensively studied. This study reviews existing research on various synthesis methods for the preparation of bimetallic catalysts and their catalytic application to the treatment of organic (dyes, phenol and its derivatives, and chlorinated organic compounds) and inorganic pollutants (nitrate and hexavalent chromium) from water and wastewater. The reaction mechanisms, removal efficiencies, operating conditions, and research progress are also presented. The results reveal that Fe-based bimetallic catalysts are one of the most efficient heterogeneous catalysts for the treatment of organic and inorganic contamination. Furthermore, the roles and performances of bimetallic catalysts in the removal of these environmental contaminants are different.

Carbon nanofibers supported Co/Ag bimetallic nanoparticles for heterogeneous activation of peroxymonosulfate and efficient oxidation of amoxicillin

The carbon nanofibers supported Co/Ag bimetallic nanoparticles (Co@CNFs-Ag) were synthesized for heterogeneous activation of peroxymonosulfate and efficient oxidation of amoxicillin in this work. Co nanoparticles with a diameter of 20-30 nm were encapsulated in the carbon nanofibers to reduce the loss of Co during the preparation and catalysis processes. Ag nanoparticles (5-10 nm) were distributed on the surface of CNFs. Complete removal of amoxicillin could be achieved within 30 min by Co@CNFs-Ag activated peroxymonosulfate system. The high catalytic performance could be attributed to the large aspect ratio (> 10,000) of the carbon nanofibers and the mutual reaction of the Co/Ag bimetallic nanoparticles with peroxymonosulfate. The optimal mass ratio of oxidant and catalyst was 10 and the optimized pH was 7. Co@CNFs-Ag exhibited stable catalytic activity and minimal metal leakage over a period of 5 cycles. The activation energy of the system was 29.51 kJ/mol derived by the Arrhenius equation. Both hydroxyl and sulfate radicals contributed to amoxicillin degradation and the latter were key to the degradation. Finally, the reaction mechanism of bimetallic synergistic catalytic system and possible amoxicillin degradation pathways were elucidated. The results of this study provide novel insights for application of sulfate radical-based advanced oxidation processes in environmental remediation.

Mechanism insight into efficient peroxydisulfate activation by novel nano zero-valent iron anchored yCo3O4 (nZVI/yCo3O4) composites

Novel nano zero-valent iron anchored bio-matrix supported Co₃O₄ (nZVI/yCo₃O₄) composites were fabricated for tetracycline (TC) efficient degradation by activating peroxydisulfate (PS). The systematical characterizations verified that the nZVI/yCo₃O₄ composites with magnetism have higher surface area than yCo₃O₄ and pure Co₃O₄, contributing to more accessible active sites. Various catalytic parameters (nZVI mass ratio, leached ions, initial pH, catalyst dosage, PS concentration and coexisting anions) were thoroughly investigated. In nZVI/yCo₃O₄/PS system, 97.6 %, 93.4 % and 77.3 % TC were degraded within 15 min at pH 3.0, 6.0 and 9.0, respectively. Based on four successive degradation runs, the excellent mineralization rate and reusability of nZVI/yCo₃O₄ composites were mainly benefited from the suppressed metals leaching. The PS activated mechanisms were proposed as non-radicals (¹O₂) dominated pattern at acidic conditions and radicals (SO₄-) predominant pattern at alkaline environment, which may be highly related to the electron donating capacity of nZVI at different pH and the M^(n + 1)+/Mⁿ⁺ redox cycling between Fe or Co metal. The plausible degradation routes of TC were presented based on the detected intermediates. Overall, the synthesized heterogeneous nZVI/yCo₃O₄ composites can efficiently active PS at a wide pH range, and further broaden the application of Co-based catalysts in PS activation.

Catalytic potential of CuFe2O4/GO for activation of peroxymonosulfate in metronidazole degradation: study of mechanisms

Application of magnetite nanoparticles (CuFe2O4/GO) were anchored on graphene oxide (GO), as a Heterogeneous nanocomposite for activating of peroxymonosulfate (PMS) into Metronidazole (MNZ) destruction. The effect of solution pH, reaction time, effectiveness of water matrix components and trapping factors, different catalyst concentrations, PMS and contaminants were evaluated as operating factors on the efficiency of MNZ degradation. Also, mineralization, stability, reactivity and Recycling tests of the catalyst, and the degradation kinetics were performed. MNZ degradation and mineralization were obtained under optimal conditions (0.2 g/L catalyst, pH = 5, 30 mg/L MNZ and 2 mM PMS), 100% and 41.02%, respectively over 120 min. Leaching of Fe and Cu was found <0.2 mg/L for CuFe2O4/GO showed a high stability of catalyst, and a significant recyclability was achieved CuFe2O4/GO within 5 times consecutive use. MNZ degradation affected by anions was reduced as follows: HCO3 - > NO3 - > Cl- > SO4 2-. The experimental data were very good agreement with pseudo-first-order kinetic model, and during quenching tests SO4 •- radicals played a dominant role in the degradation process of MNZ. As a result, the CuFe2O4/GO/PMS system can be described as a promising activation of PMS in MNZ degradation, due to its high stability, reusability and good catalyst reactivity, and the production of reactive species simultaneously.

Electrochemical activation of peroxymonosulfate in cathodic micro-channels for effective degradation of organic pollutants in wastewater

Persulfate may be electrochemically activated into sulfate radicals (SO₄^•-) or hydroxyl radicals (^•OH) by accepting electrons on cathode. Although electro-activated persulfate has displayed good performance in oxidation of organic pollutants in wastewater, both yield and availability of radicals are still limited because the electrostatic repulsion resists the contact between persulfate anions and cathode. In this study, a flow-through cathode (FTC) with well-ordered micro-channels was fabricated via carbonization of wood. The solution containing persulfate ions flowed through these micro-channels and then activation of persulfate was confined and performed in the micro-channels, which enhanced remarkably the contact between persulfate ions and cathode. Under the residence time of 10 min and other optimized conditions, the decomposition rate of persulfate in FTC displayed 3.78 folds of enhancement compared with that on a flow-by cathode (FBC). EPR signal of ^•OH produced in FTC was also higher distinctly than that on FBC. The average removal rates of phenol and TOC in FTC were 97.9 % and 39.6 %, respectively, which were 2.61 times and 2.57 times as much as that on FBC. Cycling experiments indicated that this FTC had good stability. Therefore, activating persulfate in FTC is an efficient strategy to enhance the yield and availability of radicals.

Co3O4/Bi4O5I2/Bi5O7I C-Scheme Heterojunction for Degradation of Organic Pollutants by Light-Emitting Diode Irradiation

Remediation of organic pollutant matrixes from wastewater by photodegradation using different heterojunctions is extensively studied to improve performance for potential application. Brilliant black (BB) and p-nitrophenol (PNP) have been detected in the environment and implicated as directly or indirectly carcinogenic to human health. This work analyzes their elimination from aqueous solutions under visible-light irradiation with composites of cobalt(II, III) oxide and bismuth oxyiodides (Co₃O₄/Bi₄O₅I₂/Bi₅O₇I). The synthesized nanomaterial properties were investigated using various techniques such as BET, SEM/EDS, TEM, XRD, FTIR, PL, and UV-vis. All the nanocomposites absorbed in the visible range of the solar spectrum with band gaps between 1.68 and 2.79 eV, and the specific surface area of the CB2 composite increased by 35.8% from that of Bi₄O₅I₂/Bi₅O₇I. There was an observed massive reduction in the rate of electron and hole recombination, and the band gaps of the composites decreased. The mineralization of PNP and BB was followed by determination of the total organic carbon with reductions of 93.6 and 83.7%, respectively. The main active species were the hydroxyl radicals, while the superoxide anion radical and generated holes were minor as confirmed by radical trapping experiments. The optimum pHs for degradation of PNP and BB were 9.6 and 5.3, respectively. The enhanced performance of the catalyst was due to C-scheme heterojunction formation that reduced the electron and hole recombination rate and was attributed to strong adsorption of the pollutants on the photocatalyst active surface. The nanocomposite is apposite for solar energy-driven remediation of organic pollutants from environmental aqueous samples.

Microwave-assisted one pot synthesis of β-cyclodextrin modified biochar for concurrent removal of Pb(II) and bisphenol a in water

Herein, β-cyclodextrin (β-CD) functionalized rice husk-derived biochar (BC) was conveniently and fast synthesized via microwave (MW)-assisted one pot process, and employed for simultaneous elimination of bisphenol A (BPA) and plumbum (Pb). Profiting by microwave irradiation, the surface modification was implemented in 15 min and the prepared BC_MW-β-CD presented an excellent adsorption performance with a heterogeneous adsorption capacity of 209.20 mg/g for BPA and a theoretical monolayer uptake of 240.13 mg/g for Pb(II) in the mono-component system. Furthermore, the BC_MW-β-CD could simultaneously achieve efficient cleanup of BPA and Pb(II) through avoiding the competitive behaviors between them, which were due to the different adsorption mechanisms for Pb(II) (i.e. electrostatic attraction and complexation) and BPA (i.e. host-guest supramolecular and π-π interactions). Moreover, the adsorbed BPA and Pb(II) could be sequentially desorbed with mild decrease in the adsorption performance of BC_MW-β-CD even after five cycles in the Pb(II)-BPA multi-component system.

The application of microwaves in sulfate radical-based advanced oxidation processes for environmental remediation: A review

The generation of sulfate radicals is a key factor to limit the catalytic activities of sulfate radical-based advanced oxidation processes (SR-AOPs). Microwave irradiation is a specific method to heat solutions via thermal and nonthermal effects, and has attracted an increasing amount of attention in recent years. Herein, we focus on the application of microwaves in SR-AOPs that called SR-MAOPs in environmental remediation, including wastewater, landfill leachate, biological waste sludge and soil, etc. treatment. Various systems including homogeneous and heterogeneous SR-MAOPs were reviewed. In wastewater treatment, not only the dyes and pharmaceutical and personal care products (PPCPs) were considered, the application in actual water matrices was also summarized. In addition, the function of remediation for organic-contaminated soil, landfill leachate and biological waste sludge were assessed using SR-MAOPs. In addition to evaluating the degradation efficiency of various organic pollutants from environment, the dewaterability is another key to treat biological waste sludge. The SR-MAOPs could break up hydrogen bonds and inactivate and denature complex biological molecules via microwave effects to achieve the dewatering of microorganisms in sludge. Furthermore, the COD of the sludge increased to a high level after microwave irradiation of sludge, which means that biopolymers released from microbial cells into the solution. Then, the released COD could be well treated by the SR-MAOPs. Based on the summary, we reveal that SR-MAOPs are potential technologies for environmental remediation, especially for systems with complicated organic compounds.