Aerobic co-composting degradation of highly PCDD/F-contaminated field soil. A study of bacterial community

Black soldier fly larvae mitigate greenhouse gas emissions from domestic biodegradable waste by recycling carbon and nitrogen and reconstructing microbial communities

Black soldier fly larvae have been proven to reduce greenhouse gas emissions in the treatment of organic waste. However, the microbial mechanisms involved have not been fully understood. The current study mainly examined the dynamic changes of carbon and nitrogen, greenhouse gas emissions, the succession of microbial community structure, and changes in functional gene abundance in organic waste under larvae treatment and non-aeration composting. Thirty percent carbon and 55% nitrogen in the organic waste supplied were stored in larvae biomass. Compared to the non-aeration composting, the larvae bioreactor reduced the proportion of carbon and nitrogen converted into greenhouse gases (CO2, CH4, and N2O decreased by 62%, 87%, and 95%, respectively). 16S rRNA sequencing analysis indicated that the larvae bioreactor increased the relative abundance of Methanophaga, Marinobacter, and Campylobacter during the bioprocess, enhancing the consumption of CH4 and N2O. The metagenomic data showed that the intervention of larvae reduced the ratio of (nirK + nirS + nor)/nosZ in the residues, thereby reducing the emission of N2O. Larvae also increased the functional gene abundance of nirA, nirB, nirD, and nrfA in the residues, making nitrite more inclined to be reduced to ammonia instead of N2O. The larvae bioreactor mitigated greenhouse gas emissions by redistributing carbon and nitrogen and remodeling microbiomes during waste bioconversion, giving related enterprises a relative advantage in carbon trading.

Optimization of organic solid waste composting process through iron-related additives: A systematic review

Composting is an environmentally friendly method that facilitates the biodegradation of organic solid waste, ultimately transforming it into stable end-products suitable for various applications. The element iron (Fe) exhibits flexibility in form and valence. The typical Fe-related additives include zero-valent-iron, iron oxides, ferric and ferrous ion salts, which can be targeted to drive composting process through different mechanisms and are of keen interest to academics. Therefore, this review integrated relevant literature from recent years to provide more comprehensive overview about the influence and mechanisms of various Fe-related additives on composting process, including organic components conversion, humus formation and sequestration, changes in biological factors, stability and safety of composting end-products. Meanwhile, it was recommended that further research be conducted on the deep action mechanisms, biochemical pathways, budget balance analysis, products stability and application during organic solid waste composting with Fe-related additives. This review provided guidance for the subsequent targeted application of Fe-related additives in compost, thereby facilitating cost reduction and promoting circular economy objectives.

Feedstock optimization with rice husk chicken manure and mature compost during chicken manure composting: Quality and gaseous emissions

This study investigated the impact of mature compost input on compost quality, greenhouse gases (GHGs, i.e. methane and nitrous oxide) and ammonia emissions during chicken manure and rice husk chicken manure co-composting. The experiment used different volumes of mature compost: 10% (T1), 20% (T2), and 30% (T3) to replace rice husk chicken manure. Results showed that mature compost enhanced compost maturity by promoting the activities of Bacillus, Caldicoprobacter, Thermobifida, Pseudogracilibacillus, Brachybacterium, and Sinibacillus. Compared to CK, T1, T2, and T3 reduced NH3 emission by 32.07%, 33.64%, and 56.12%, and mitigated 14.97%, 16.57%, and 26.18% of total nitrogen loss, respectively. Additionally, T2 and T3 reduced CH4 emission by 40.98% and 62.24%, respectively. The N2O emissions were positive correlation with Lactobacillus, Pseudogracilibacillus and ammonium nitrogen (p < 0.05), while T2 reducing total greenhouse effects. Therefore, replacing rice husk chicken manure with 20% mature compost is an efficient and promising approach for composting.

Enhanced biodegradation of endocrine disruptor bisphenol A by food waste composting without bioaugmentation: Analysis of bacterial communities and their relative abundances

Composting with food waste was assessed for its efficacy in decontaminating Bisphenol A (BPA). In a BPA-treated compost pile, the initial concentration of BPA 847 mg kg-1 fell to 6.3 mg kg-1 (99% reduction) over a 45-day composting period. The biodegradation rate was at its highest when bacterial activity peaked in the mesophilic and thermophilic phases. The average rate of total biodegradation was 18.68 mg kg-1 day-1. Standard methods were used to assess physicochemical parameters of the compost matrix and gas chromatography combined with mass spectrometry (GC/MS) was used to identify BPA intermediates. Next-generation sequencing (NGS) was used to detect BPA degraders and the diverse bacterial communities involved in BPA decomposition. These communities were found consist of 12 phyla and 21 genera during the composting process and were most diversified during the maturation phase. Three dominant phyla, Firmicutes, Pseudomonadota, and Bacteroidetes, along with Lactobacillus, Proteus, Bacillus, and Pseudomonas were found to be the most responsible for BPA degradation. Different bacterial communities were found to be involved in the food waste compost biodegradation of BPA at different stages of the composting process. In conclusion, food waste composting can effectively remove BPA, resulting in a safe product. These findings might be used to expand bioremediation technologies to apply to a wide range of pollutants.

Exploring the role of microbes for the management of persistent organic pollutants

Persistent organic pollutants (POPs) are chemicals which have been persisting in the environment for many years due to their longer half-lives. POPs have gained attention over the last few decades due to the unsustainable management of chemicals which led to their widespread and massive contamination of biota from different strata and environments. Due to the widespread distribution, bio-accumulation and toxic behavior, POPs have become a risk for organisms and environment. Therefore, a focus is required to eliminate these chemicals from the environment or transform into non-toxic forms. Among the available techniques for the removal of POPs, most of them are inefficient or incur high operational costs. As an alternative to this, microbial bioremediation of POPs such as pesticides, polycyclic aromatic hydrocarbons, polychlorinated biphenyls, pharmaceuticals and personal care products is much more efficient and cost-effective. Additionally, bacteria play a vital role in the biotransformation and solubilization of POPs, which reduces their toxicity. This review specifies the Stockholm Convention that evaluates the risk profile for the management of existing as well as emerging POPs. The sources, types and persistence of POPs along with the comparison of conventional elimination and bioremediation methods of POPs are discussed comprehensively. This study demonstrates the existing bioremediation techniques of POPs and summaries the potential of microbes which serve as enhanced, cost-effective, and eco-friendly approach for POPs elimination.

Soil microbiome response to 2-chlorodibenzo-p-dioxin during bioremediation of contaminated tropical soil in a microcosm-based study

A pristine soil was artificially contaminated with 2-chlorodibenzo-p-dioxin (2-CDD) and separated into three portions. Microcosms SSOC and SSCC were seeded with Bacillus sp. SS2 and a three-member bacterial consortium respectively; SSC was untreated, while heat-sterilized contaminated soil served as overall control. Significant degradation of 2-CDD occurred in all microcosms except for the control where the concentration remained unchanged. Degradation of 2-CDD was highest in SSCC (94.9%) compared to SSOC (91.66%) and SCC (85.9%). There was also a notable reduction in the microbial composition complexity both in species richness and evenness following dioxin contamination, a trend that nearly lasted the study period; particularly in setups SSC and SSOC. Irrespective of the bioremediation strategies, the soil microflora was practically dominated by the Firmicutes and at the genus level, the phylotype Bacillus was the most dominant. Other dominant taxa though negatively impacted were Proteobacteria, Actinobacteria, Chloroflexi, and Acidobacteria. Overall, this study demonstrated the feasibility of microbial seeding as an effective strategy to cleanup tropical soil contaminated with dioxins and the importance of metagenomics in elucidating the microbial diversities of contaminated soils. Meanwhile, the seeded organisms, owed their success not only to metabolic competence, but survivability, adaptability and ability to compete favourably with autochthonous microflora.

Succession of biochar addition for soil amendment and contaminants remediation during co-composting: A state of art review

This paper aimed to highlight the succession of biochar addition for soil amendment and contaminants remediation during composting process. Biochar incorporated into the compost mixture promotes composting performance and enhances contaminants reduction. Co-composting with biochar for soil biota has been demonstrated via modified soil biological community abundance and diversity. On the other hand, adverse alterations to soil properties were noted, which had a negative impact on the communication of microbe-to-plant interactions within the rhizosphere. As a result, these changes influenced the competition between soilborne pathogens and beneficial soil microorganisms. Co-composting with biochar promoted the heavy metals (HMs) remediation efficiency in contaminated soils by around 66-95%. Notably, applying biochar during composting could improve nutrient retention and mitigate leaching. The adsorption of nutrients such as nitrogen and phosphorus compounds by biochar can be applied to manage environmental contamination and presents an excellent opportunity to enhance soil quality. Additionally, the various specific functional groups and large specific surface areas of biochar allow for excellent adsorption of persistent pollutants (e.g., pesticides, polychlorinated biphenyls (PCBs)) and emerging organic pollutants, such as microplastic, phthalate acid esters (PAEs) during co-composting. Finally, future perspectives, research gaps, and recommendations for further studies are highlighted, and potential opportunities are discussed.

Synergistic effects of rice husk biochar and aerobic composting for heavy oil-contaminated soil remediation and microbial community succession evaluation

Soil petroleum pollution is an urgent problem in modern society, which seriously threatens the ecological balance and environmental safety. Aerobic composting technology is considered economically acceptable and technologically feasible for the soil remediation. In this study, the combined experiment of aerobic composting with the addition of biochar materials was conducted for the remediation of heavy oil-contaminated soil, and treatments with 0, 5, 10 and 15 wt% biochar dosages were labeled as CK, C5, C10 and C15, respectively. Conventional parameters (temperature, pH, NH₄⁺-N and NO₃^--N) and enzyme activities (urease, cellulase, dehydrogenase and polyphenol oxidase) during the composting process were systematically investigated. Remediation performance and functional microbial community abundance were also characterized. According to experimental consequences, removal efficiencies of CK, C5, C10 and C15 were 48.0%, 68.1%, 72.0% and 73.9%, respectively. The comparison with abiotic treatments corroborated that biostimulation rather than adsorption effect was the main removal mechanism during the biochar-assisted composting process. Noteworthy, the biochar addition regulated the succession process of microbial community and increased the abundance of microorganisms related to petroleum degradation at the genus level. This work demonstrated that aerobic composting with biochar amendment would be a fascinating technology for petroleum-contaminated soil remediation.

Biochar Can Improve Absorption of Nitrogen in Chicken Manure by Black Soldier Fly

(1) Background: There is growing interest in using insects to treat nutrient-rich organic wastes, such as the black soldier fly (BSF), one of the most efficient organic waste recyclers for upcycling nutrients into the food system. Although biochar (BC) was shown to enhance nutrient retention and the final product quality during the composting of livestock and poultry manure in many previous studies, little information is available on the effect of BC on livestock manure bioconversion by black soldier fly larvae (BSFL). (2) Methods: This study investigated the effect of adding a small amount of BC to chicken manure (CM) on the bioconversion system of the black soldier fly (including N2O and NH3 emissions and the final distribution of nitrogen during the treatment process). (3) Results: The lowest N2O and NH3 emission and highest residual nitrogen in the substrate were observed in the 15% BC treatment. The highest bioconversion rate of CM (8.31%) and the peak of larval biomass was obtained in the 5% BC treatment. (4) Conclusions: The results demonstrate the feasibility of adding 5% BC to reduce pollution and achieve a satisfactory BSFL-based CM bioconversion efficiency.

Ecological risk assessment and corrective actions for dioxin-polluted sediment in a chemical plant's brine water storage pond

Despite the known high toxicity of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs, or dioxins), there are few case studies of PCDD/Fs contamination in sediment and there remains much to learn regarding their ecological impact. In this study, we performed an environmental risk assessment of a brine water storage pond near a chemical plant with high PCDD/Fs pollution potential before and after corrective actions. We found PCDD/F accumulation in the pond's fish and crab from the brine water storage pond, and the PCDD/Fs concentrations in biota higher than Taiwan's food safety standard (3.5 pg-TEQ/g). Furthermore, we found a high degree of pollution using different indices, including contamination factor (CF), modified degree of contamination (mCd), and pollution index (PI), in the pond's sediment. Before corrective actions, we also found high risk in the PCDD/F contamination in the sediment using various biological risk indices, including potential ecological risk index (RI) and risk quotient (RQ). After the corrective actions, including institutional/engineering control and remediation, the CF, mCd, and PI had decreased by 20-41 % and RI and RQ by 41-56 %. In addition, despite the slight reduction of pollution and risk index values in the whole pond, significant reduction was observed in the sediment of highly polluted area A owing to the lower disturbing suction dredging. In conclusion, the corrective actions used in this study helped decrease the pollution and ecological risk associated with this site's PCDD/Fs polluted sediment to some extent, suggesting that contamination and risk could be reduced to acceptable levels if these corrective actions are continued.

Biodegradation of high di-(2-Ethylhexyl) phthalate (DEHP) concentration by food waste composting and its toxicity assessment using seed germination test

Di-(2-ethylhexyl) phthalate (DEHP), a plasticizer derived from phthalate ester, is used as an additive in industrial products such as plastics, paints, and medical devices. However, DEHP is known as an endocrine-disrupting chemical, causing cancers and adverse effects on human health. This study evaluated DEHP biodegradation efficiency via food waste composting during 35 days of incubation. At high DEHP concentrations (2167 mg kg^-1) in food waste compost mixture, the DEHP biodegradation efficiency was 99% after 35 days. The highest degradation efficiency was recorded at the thermophilic phase (day 3 - day 11) with the biodegradation rate reached 187 mg kg^-1 day^-1. DEHP was metabolized to dibutyl phthalate (DBP) and dimethyl phthalate (DMP) and would be oxidized to benzyl alcohol (BA) and mineralized into CO₂ and water via various metabolisms. Finally, the compost's quality with residual DEHP was evaluated using Brassica chinensis L. seeds via 96 h of germination tests. The compost (at day 35) with a trace amount of DEHP as the end product showed no significant effect on the germination rate of Brassica chinensis L. seeds (88%) compared to that without DEHP (94%), indicating that the compost can be reused as fertilizer in agricultural applications. These results provide an improved understanding of the DEHP biodegradation via food waste composting without bioaugmentation and hence facilitating its green remediation and conversion into value-added products. Nevertheless, further studies are needed on DEHP biodegradation in large-scale food waste composting or industrial applications.

Composting of Organic Solid Waste of Municipal Origin: The Role of Research in Enhancing Its Sustainability

The organic solid waste of municipal origin stands as one of the residual streams of greatest concern: the great amounts continuously produced over time as well as its biochemical and physical characteristics require its proper handling via biological processes, pursuing the recovery of material and/or the generation of energy. At the European level, most of the industrial plants treating the organic fraction of municipal solid waste (OFMSW) rely on composting, which is a well-established and reliable process that is easy to operate in different socio-economic contexts. Nevertheless, when regarded in a life cycle perspective as well as in the view of the principles of circular economy underlying waste management, several issues (e.g., the presence of toxic substances in compost) can be recognized as technical challenges, requiring further studies to identify possible sustainable solutions. This work aims at discussing these challenges and figuring out the state of the art of composting in a circular perspective. Firstly, the main mentioned issues affecting compost quality and process sustainability are briefly reviewed. Next, to promote the effective use of composting in light of the circular economy principles, research experiences are critically presented to highlight the current technical challenges concerning the environmental and health impact reduction and possible scientific perspectives to overcome issues affecting the compost quality. Based on the critical analysis of reviewed studies, it emerged that further research should be aimed at unveiling the hazard potential of emerging contaminants as well as to address the understanding of the mechanisms underlying their potential removal during composting. Moreover, the adoption of a multidisciplinary perspective in the design of research studies may play a key role towards the definition of cost-effective and environmentally friendly strategies to overcome the technical issues affecting the process.

Characteristics of carbon, nitrogen, phosphorus and sulfur cycling genes, microbial community metabolism and key influencing factors during composting process supplemented with biochar and biogas residue

Carbon (C), nitrogen (N), phosphorus (P), and sulfur (S) cycling functional genes and bacterial and fungal communities during composting with biochar and biogas residue amendments were studied. Correlations between microbial community structure, functional genes and physicochemical properties were investigated by network analysis and redundancy analysis. It was shown that the gene of acsA abundance accounted for about 50% of the C-related genes. Biogas residue significantly decreased the abundance of denitrification gene nirK. Biogas residues can better promote the diversity of bacteria and fungi during composting. Biochar significantly increased the abundance of Humicola. Redundancy analysis indicated that pile temperature, pH, EC were the main physicochemical factors affecting the microbial community. WSC and NO₃^--N have significant correlation with C, N, P, S functional genes. The research provides a theoretical basis for clarifying the metabolic characteristics of microbial communities during composting and for the application of biochar and biogas residues in composting.

Analysis and discussion on formation and control of dioxins generated from municipal solid waste incineration process

Dioxins are a kind of persistent organic pollutants (POPs) with extremely toxic. Municipal solid waste incineration (MSWI) process has become one of the most dominant discharge sources of dioxins. A comprehensive discussion about dioxin formation mechanisms was reviewed in this paper, and the mechanisms of high-temperature gas-phase reaction and "de novo" synthesis were systematically illustrated in the form of diagrams. What's more, the effects of various influencing factors on the formation of PCDD/Fs were briefly analyzed in the form of a table. We believed that temperature, catalyst, chlorine source, carbon source, oxygen concentration and moisture were necessary factors for PCDD/Fs formation. Control technologies of dioxins in MSWI process were summarized subsequently from three stages: pre-combustion, in-combustion and post-combustion, and a device for synergistic removal of dioxins based on multi-field force coupling and technical routes for controlling dioxin emissions were proposed, so as to provide mechanisms and methods for effectively reducing the emission concentration of dioxins. An introduction was also conducted of dioxin control technologies in municipal solid waste incineration fly ash (MSWI-FA) in this paper, and their mechanisms, advantages, disadvantages and technical maturity were illustrated in the form of diagrams, which can provide theory and reference for in-depth research of follow-up scholars and industrial application of dioxin control technologies. Finally, current research hotspots, challenges and future research directions were proposed.Implications: In this paper, the main research contents and achievements are as follows: With the emphasis placed on the formation mechanism of dioxins and effects of various influencing factors on the formation of PCDD/Fs. The control technology of dioxins in MSWI process is summarized subsequently from three stages: pre-combustion, in-combustion and post-combustion.A device for synergistic removal of dioxins based on multi-field force coupling and technical routes for controlling dioxin emissions are proposed.A systematic review is conducted of the research progress on control technologies of dioxins in MSWI fly ash in the most recent years.The mechanisms, advantages, disadvantages and technical maturity of PCDD/Fs degradation technologies in MSWI fly ash are illustrated in the form of diagrams.Current research hotspots, challenges and future research directions are proposed.

Effects of di-n-butyl phthalate on aerobic composting process of agricultural waste: Mainly based on bacterial biomass and community dynamics analysis

Phthalic acid esters (PAEs) pollution has become a major environmental problem in agricultural waste composting. However, little information was available about the how the PAEs alter microbial processes during composting. This study investigated the effects of di-n-butyl phthalate (DBP) on bacterial biomass and community dynamics during composting. The results showed that a decreasing of DBP was observed from thermophilic phase and 43.26% of DBP was degraded after composting. The bacterial biomass and diversity during composting were reduced under DBP stress, so delaying the decomposition of organic matter. Moreover, the changes in bacterial community were observed since the thermophilic phase of DBP-contaminated composting. KEGG pathway analysis indicated that DBP stress decreased the relative abundance of the main metabolic pathways and inhibited compost maturation. Moreover, DBP stress had more significant correlation with the dominant bacteria. This work will expand the understanding of PAEs-contaminated organic waste composting and further control of PAEs pollutants.

The nitrogen cycle and mitigation strategies for nitrogen loss during organic waste composting: A review

Composting is a promising technology to decompose organic waste into humus-like high-quality compost, which can be used as organic fertilizer. However, greenhouse gases (N₂O, CO₂, CH₄) and odorous emissions (H₂S, NH₃) are major concerns as secondary pollutants, which may pose adverse environmental and health effects. During the composting process, nitrogen cycle plays an important role to the compost quality. This review aimed to (1) summarizes the nitrogen cycle of the composting, (2) examine the operational parameters, microbial activities, functions of enzymes and genes affecting the nitrogen cycle, and (3) discuss mitigation strategies for nitrogen loss. Operational parameters such as moisture, oxygen content, temperature, C/N ratio and pH play an essential role in the nitrogen cycle, and adjusting them is the most straightforward method to reduce nitrogen loss. Also, nitrification and denitrification are the most crucial processes of the nitrogen cycle, which strongly affect microbial community dynamics. The ammonia-oxidizing bacteria or archaea (AOB/AOA) and the nitrite-oxidizing bacteria (NOB), and heterotrophic and autotrophic denitrifiers play a vital role in nitrification and denitrification with the involvement of ammonia monooxygenase (amoA) gene, nitrate reductase genes (narG), and nitrous oxide reductase (nosZ). Furthermore, adding additives such as struvite salts (MgNH₄PO₄·6H₂O), biochar, and zeolites (clinoptilolite), and microbial inoculation, namely Bacillus cereus (ammonium strain), Pseudomonas donghuensis (nitrite strain), and Bacillus licheniformis (nitrogen fixer) can help control nitrogen loss. This review summarized critical issues of the nitrogen cycle and nitrogen loss in order to help future composting research with regard to compost quality and air pollution/odor control.

Evaluate the role of biochar during the organic waste composting process: A critical review

Composting is very robust and efficient for the biodegradation of organic waste; however secondary pollutants, namely greenhouse gases (GHGs) and odorous emissions, are environmental concerns during this process. Biochar addition to compost has attracted the interest of scientists with a lot of publication in recent years because it has addressed this matter and enhanced the quality of compost mixture. This review aims to evaluate the role of biochar during organic waste composting and identify the gaps of knowledge in this field. Moreover, the research direction to fill knowledge gaps was proposed and highlighted. Results demonstrated the commonly referenced conditions during composting mixed biochar should be reached such as pH (6.5-7.5), moisture (50-60%), initial C/N ratio (20-25:1), biochar doses (1-20% w/w), improved oxygen content availability, enhanced the performance and humification, accelerating organic matter decomposition through faster microbial growth. Biochar significantly decreased GHGs and odorous emissions by adding a 5-10% dosage range due to its larger surface area and porosity. On the other hand, with high exchange capacity and interaction with organic matters, biochar enhanced the composting performance humification (e.g., formation humic and fulvic acid). Biochar could extend the thermophilic phase of composting, reduce the pH value, NH₃ emission, and prevent nitrogen losses through positive effects to nitrifying bacteria. The surfaces of the biochar particles are partly attributed to the presence of functional groups such as Si-O-Si, OH, COOH, CO, C-O, N for high cation exchange capacity and adsorption. Adding biochars could decrease NH₃ emissions in the highest range up to 98%, the removal efficiency of CH₄ emissions has been reported with a wide range greater than 80%. Biochar could absorb volatile organic compounds (VOCs) more than 50% in the experiment based on distribution mechanisms and surface adsorption and efficient reduction in metal bioaccessibilities for Pb, Ni, Cu, Zn, As, Cr and Cd. By applicating biochar improved the compost maturity by promoting enzymatic activity and germination index (>80%). However, physico-chemical properties of biochar such as particle size, pore size, pore volume should be clarified and its influence on the composting process evaluated in further studies.

A Review of Soil Contaminated with Dioxins and Biodegradation Technologies: Current Status and Future Prospects

This article provides a comprehensive assessment of dioxins contaminating the soil and evaluates the bioremediation technology currently being widely used, and also offers recommendations for future prospects. Soil pollution containing dioxins is extremely toxic and hazardous to human health and the environment. Dioxin concentrations in soils around the world are caused by a variety of sources and outcomes, but the main sources are from the consequences of war and human activities. Bioremediation technology (bioaugmentation, biostimulation, and phytoremediation) is considered an optimal and environmentally friendly technology, with the goal of applying native microbial communities and using plant species with a high biomass to treat contaminated dioxins in soil. The powerful bioremediation system is the growth of microorganisms that contribute to the increased mutualistic and competitive relationships between different strains of microorganisms. Although biological treatment technology can thoroughly treat contaminated dioxins in soil with high efficiency, the amount of gas generated and Cl radicals dispersed after the treatment process remains high. Further research on the subject is required to provide stricter control over the outputs noted in this study.

Composting and its application in bioremediation of organic contaminants

This review investigates the findings of the most up-to-date literature on bioremediation via composting technology. Studies on bioremediation via composting began during the 1990s and have exponentially increased over the years. A total of 655 articles have been published since then, with 40% published in the last six years. The robustness, low cost, and easy operation of composting technology make it an attractive bioremediation strategy for organic contaminants prevalent in soils and sediment. Successful pilot-and large-scale bioremediation of organic contaminants, e.g., total petroleum hydrocarbons, plasticizers, and persistent organic pollutants (POPs) by composting, has been documented in the literature. For example, composting could remediate >90% diesel with concentrations as high as 26,315 mg kg^−a of initial composting material after 24 days. Composting has unique advantages over traditional single- and multi-strain bioaugmentation approaches, including a diverse microbial community, ease of operation, and the ability to handle higher concentrations. Bioremediation via composting depends on the diverse microbial community; thus, key parameters, including nutrients (C/N ratio = 25–30), moisture (55–65%), and oxygen content (O₂ > 10%) should be optimized for successful bioremediation. This review will provide bioremediation and composting researchers with the most recent finding in the field and stimulate new research ideas.

Soil washing for the remediation of dioxin-contaminated soil: A review

Dioxin-contaminated soil has attracted worldwide attention due to its potential negative impacts on human health and the ecosystem. Thus, technological development aiming at high treatment efficiency and low cost for dioxin-contaminated soil is largely needed. In this review, approximately 200 documents were involved to summarize up-to-date scientific achievements of soil washing technology for the remediation of dioxin-contaminated soil. The mechanisms, advantages, and limitations of physical separation techniques (e.g. mechanical stirring, mechanical shaking, ultrasonication, and froth flotation) and washing solutions (e.g. organic solvents, edible oils, and surfactants) used for chemical extraction were comprehensively reviewed. Froth flotation is very promising for field-scale soil washing, whereas organic solvents show high removal efficiencies (up to 99%) of dioxins from contaminated soil. Further, the combination of physical separation and chemical extraction can help enhance dioxin removal efficiency (from 1.5 to 2 times), reducing energy consumption and cost (about 2 times). Among available remediation technologies for dioxin-contaminated soil, soil washing is truly promising since it has shown high removal efficiency (66-99% different remediation scales) with reasonable cost (46 - 250 USD per metric ton). However, the washed solution and volatile organic compounds generated during the process remain a concern and should be addressed in future research.

Innovative mycoremediation technique for treating unsterilized PCDD/F-contaminated field soil and the exploration of chlorinated metabolites

Mycoremediation of unsterilized PCDD/F-contaminated field soil was successfully demonstrated by solid-state fermentation coupled with Pleurotus pulmonarius utilizing a patented incubation approach. The experiments were carried out in four setups with two as controls. The contaminated soil was homogenously mixed with solid inocula, 1:0.5 dry w/w, resulting in an initial concentration of 4432 ± 623 ng WHO-TEQ kg^-1. After a 30-day incubation under controlled conditions, the overall removal (approx. 60%) was non-specific. The removal was attributed to degradation by extracellular ligninolytic enzymes and uptake into the fruiting tissue (~110 ng WHO-TEQ kg^-1 of mushroom). Furthermore, less recalcitrant chlorinated metabolites were found, implying ether bond cleavage and dechlorination happened during the mycoremediation. These metabolites resulted from the complex interaction between P. pulmonarius and the indigenous microbes from the unsterilized soil. This study provides a new step toward scaling up this mycoremediation technique to treat unsterilized PCDD/F-contaminated field soil.

Role of nanocatalyst in the treatment of organochlorine compounds - A review

Since a few centuries ago, organochlorine compounds (OCs) become one of the threatened contaminants in the world. Due to the lipophilic and hydrophobic properties, OCs always discover in fat or lipid layers through bioaccumulation and biomagnification. The OCs are able to retain in soil, sediment and water for long time as it is volatile, OCs will evaporate from soil and condense in water easily and frequently, which pollute the shelter of aquatic life and it affects the function of organs and damage system in human body. Photocatalysis that employs the usage of semiconductor nanophotocatalyst and solar energy can be the possible alternative for current conventional water remediation technologies. With the benefits of utilizing renewable energy, no production of harmful by-products and easy operation, degradation of organic pollutants in rural water bodies can be established. Besides, nanophotocatalyst that is synthesized with nanotechnology outnumbered conventional catalyst with larger surface area to volume ratio, thus higher photocatalytic activity is observed. In contrast, disadvantages particularly no residual effect in water distribution network, requirement of post-treatment and easily affected by various factors accompanied with photocatalysis method cannot be ignored. These various factors constrained the photocatalytic efficiency via nanocatalysts which causes the full capacity of solar photocatalysis has yet to be put into practice. Therefore, further modifications and research are still required in nanophotocatalysts' synthesis to overcome limitations such as large band gaps and photodecontamination.

A review on the valorisation of food waste as a nutrient source and soil amendment

Valorisation of food waste offers an economical and environmental opportunity, which can reduce the problems of its conventional disposal. Food waste is commonly disposed of in landfills or incinerated, causing many environmental, social, and economic issues. Large amounts of food waste are produced in the food supply chain of agriculture: production, post-harvest, distribution (transport), processing, and consumption. Food waste can be valorised into a range of products, including biofertilisers, bioplastics, biofuels, chemicals, and nutraceuticals. Conversion of food waste into these products can reduce the demand of fossil-derived products, which have historically contributed to large amounts of pollution. The variety of food chain suppliers offers a wide range of feedstocks that can be physically, chemically, or biologically altered to form an array of biofertilisers and soil amendments. Composting and anaerobic digestion are the main large-scale conversion methods used today to valorise food waste products to biofertilisers and soil amendments. However, emerging conversion methods such as dehydration, biochar production, and chemical hydrolysis have promising characteristics, which can be utilised in agriculture as well as for soil remediation. Valorising food waste into biofertilisers and soil amendments has great potential to combat land degradation in agricultural areas. Biofertilisers are rich in nutrients that can reduce the dependability of using conventional mineral fertilisers. Food waste products, unlike mineral fertilisers, can also be used as soil amendments to improve productivity. These characteristics of food wastes assist in the remediation of contaminated soils. This paper reviews the volume of food waste within the food chain and types of food waste feedstocks that can be valorised into various products, including the conversion methods. Unintended consequences of the utilisation of food waste as biofertilisers and soil-amendment products resulting from their relatively low concentrations of trace element nutrients and presence of potentially toxic elements are also evaluated.

Bacterial community progression during food waste composting containing high dioctyl terephthalate (DOTP) concentration

The overall dioctyl terephthalate (DOTP) degradation efficiency during food waste composting was 98%. The thermophilic phases contributed to 76% of the overall degradation efficiency, followed by the maturation phase (22%), then the mesophilic phase (0.7%). The thermophilic phase had the highest specific degradation rate of 0.149 d^-1. The progression of the bacterial community during the composting process was investigated to understand DOTP biodegradation. The results showed that the bacterial richness and the alpha diversity of the DOTP composting were similar to a typical composting process, indicating that the high concentration of DOTP did not hinder the thriving and evolution of the bacterial community. Additionally, Firmicutes was the most dominant at the phylum level, followed by Proteobacteria and Bacteroidetes. Bacilli was the most dominant class (70%) in the mesophilic phase, with the abundance decreasing thereafter in the thermophilic and maturation phase. Moreover, Lactobacillus sp. was the dominant species at the beginning of the experiment, which was probably responsible for DOTP biodegradation. The high removal efficiency observed in the maturation phase indicates that degradation occurs in all the composting phases, and that compost can be used to enhance natural attenuation. These findings provide a better understanding of the bacterial communities during biodegradation of DOTP and plasticizers via food waste composting and should facilitate the development of appropriate green bioremediation technologies.

Degradation and effect of 6:2 fluorotelomer alcohol in aerobic composting of sludge

Perfluoroalkyl carboxylates (PFCAs) is toxic to the environment and human health. However, the degradation characteristics of fluorotelomer alcohols (FTOHs), precursors of PFACAs biodegradation, in the sludge during aerobic composting remain unclear. In this study, the degradation characteristics of 6:2 FTOH in sewage sludge by composting were researched and the influences of 6:2 FTOH on the composting process and microbial communities of the sludge were evaluated. After 52 days of composting, 6:2 FTOH retained only 0.73% of its original concentration, and its half-life was less than 1 d; 6:2 FTOH was degraded finally to perfluorohex unsaturated acid, perfluoropentanoic acid, 5:3 polyfluorinated acid (FTCA), 4:3 FTCA, and perfluorobutanoic acid through two pathways; and 6:2 FTCA and 6:2 fluorotel unsaturated acid were the intermediate products. Notably, dosing with 6:2 FTOH affected the composting process of sewage sludge. Additionally, 50 mg/kg 6:2 FTOH resulted in a decrease in the microbial richness and diversity of sludge compost. When compared with the compost without 6:2 FTOH, the proportion of Proteobacteria had increased, and the proportion of Firmicutes had decreased as the concentration of 6:2 FTOH increased. The negative effect of a dosage of 50 mg/kg 6:2 FTOH was more obvious than the effect of other treatments. This study expanded our understanding of the risk of sludge contaminated by 6:2 FTOH being used as a fertilizer after composting.

Aerobic composting remediation of petroleum hydrocarbon-contaminated soil. Current and future perspectives

This article provides a comprehensive review on aerobic composting remediation of soil contaminated with total petroleum hydrocarbons (TPHs). The studies reviewed have demonstrated that composting technology can be applied to treat TPH contamination (as high as 380,000 mg kg^-1) in clay, silt, and sandy soils successfully. Most of these studies reported more than 70% removal efficiency, with a maximum of 99%. During the composting process, the bacteria use TPHs as carbon and energy sources, whereas the fungi produce enzymes that can catalyze oxidation reactions of TPHs. The mutualistic and competitive interactions between the bacteria and fungi are believed to sustain a robust biodegradation system. The highest biodegradation rate is observed during the thermophilic phase. However, the presence of a diverse and dynamic microbial community ensures that TPH degradation occurs in the entire composting process. Initial concentration, soil type, soil/compost ratio, aeration rate, moisture content, C/N ratio, pH, and temperature affect the composting process and should be monitored and controlled to ensure successful degradation. Nevertheless, there is insufficient research on optimizing these operational parameters, especially for large-scale composting. Also, toxic and odorous gas emissions during degradation of TPHs, usually unaddressed, can be potential air pollution sources and need further insightful characterization and mitigation/control research.

White rot fungus Pleurotus pulmonarius enhanced bioremediation of highly PCDD/F-contaminated field soil via solid state fermentation

This study was performed to evaluate the use of white rot fungus, Pleurotus pulmonarius, to treat polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) in contaminated soil using solid state fermentation (SSF). The soil was collected from a long-closed pentachlorophenol plant in southern Taiwan. The non-sterilized soil with a total PCDD/F concentration of 14,000 ± 2400 ng I-TEQ kg^-1 was mixed directly with the solid fungal inocula at dry w/w ratio of 1:1.4 (ratio-adjusted test) and incubated at 26 ± 2 °C in a controlled environment. The highest PCDD/F decomposition was observed during the mycelium colonization. Pearson correlation coefficient (r) studied during this period (35 days) indicated that laccase had no significant correlation (r = -0.53), while manganese peroxidase had a strong positive correlation (r = 0.88) with PCDD/F decomposition efficiency. After 72 days, the more toxic congeners, tetra- and penta-CDD/Fs were removed to non-detectable levels. Meanwhile, the removal efficiencies of hexa-, hepta-, and octa-CDD/Fs were >80%, >97%, and >90%, respectively. The simultaneous degradation of low and high chlorinated DD/Fs suggested that overall removal was nonspecific. The overall PCDD/F removal was 96%, and the residual concentration (276 ng I-TEQ kg^-1) was below the regulatory control limit (1000 ng I-TEQ kg^-1). In conclusion, this study shows that P. pulmonarius via SSF can successfully remediate the PCDD/F-contaminated field soil. Furthermore, this SSF technique overcame the well-known intractability of PCDD/F biodegradation in non-sterilized soil, making it promising for actual field application.

Hazardous wastes treatment technologies

A review of the literature published in 2019 on topics related to hazardous waste management in water, soils, sediments, and air. The review covered treatment technologies applying physical, chemical, and biological principles for the remediation of contaminated water, soils, sediments, and air. PRACTICAL POINTS: This report provides a review of technologies for the management of waters, wastewaters, air, sediments, and soils contaminated by various hazardous chemicals including inorganic (e.g., oxyanions, salts, and heavy metals), organic (e.g., halogenated, pharmaceuticals and personal care products, pesticides, and persistent organic chemicals) in three scientific areas of physical, chemical, and biological methods. Physical methods for the management of hazardous wastes including general adsorption, sand filtration, coagulation/flocculation, electrodialysis, electrokinetics, electro-sorption ( capacitive deionization, CDI), membrane (RO, NF, MF), photocatalysis, photoelectrochemical oxidation, sonochemical, non-thermal plasma, supercritical fluid, electrochemical oxidation, and electrochemical reduction processes were reviewed. Chemical methods including ozone-based, hydrogen peroxide-based, potassium permanganate processes, and Fenton and Fenton-like process were reviewed. Biological methods such as aerobic, anoxic, anaerobic, bioreactors, constructed wetlands, soil bioremediation and biofilter processes for the management of hazardous wastes, in mode of consortium and pure culture were reviewed. Case histories were reviewed in four areas including contaminated sediments, contaminated soils, mixed industrial solid wastes and radioactive wastes.

Effect of passive ventilation on the performance of unplanted sludge treatment wetlands: heavy metal removal and microbial community variation

Sludge treatment wetlands (STWs) have been applied worldwide to treat excess sludge; however, the performance of STWs is generally limited by weather partly due to the plants vegetated on the STWs. In this study, ventilation is suggested to assist unvegetated STWs. Solid samples from different depths were analysed. Additionally, the variation of microbial community in STW unit was analysed and the fate of heavy metals in the sludge was determined. Results indicate that the STW unit with suitable parameters has better performance in stabilising and maturing the sludge than planted STW, which may contribute to the variation of the microbial community; additionally, ventilation exerts a positive influence on these bacteria during the variation of microbial community and on heavy metal removal through the substrate and positively impacts the Cd and Pb in reduction state. Furthermore, ventilation decreases the bioavailability of Cr. With ventilation in STWs, Bacillus and Streptomyces play a necessary role in enhancing the possibility of sludge to be used as microbial inoculants.

Aerobic bacterial transformation and biodegradation of dioxins: a review

Waste generation tends to surge in quantum as the population and living conditions grow. A group of structurally related chemicals of dibenzofurans and dibenzo-p-dioxins including their chlorinated congeners collectively known as dioxins are among the most lethal environmental pollutants formed during different anthropogenic activities. Removal of dioxins from the environment is challenging due to their persistence, recalcitrance to biodegradation, and prevalent nature. Dioxin elimination through the biological approach is considered both economically and environmentally as a better substitute to physicochemical conventional approaches. Bacterial aerobic degradation of these compounds is through two major catabolic routes: lateral and angular dioxygenation pathways. Information on the diversity of bacteria with aerobic dioxin degradation capability has accumulated over the years and efforts have been made to harness this fundamental knowledge to cleanup dioxin-polluted soils. This paper covers the previous decades and recent developments on bacterial diversity and aerobic bacterial transformation, degradation, and bioremediation of dioxins in contaminated systems.

Changes in structure and function of bacterial and fungal communities in open composting of Chinese herb residues

In this study, dynamic changes in bacterial and fungal communities, metabolic characteristics, and trophic modes in Chinese herb residues open composting for 30 days were analyzed by using high-throughput sequencing, PICRUSt, and FUNGuild, respectively. Bacillaceae and Basidiomycota predominated at the early composting stage, while Proteobacteria and Ascomycota became the dominant phyla during the active phase. Aerobic composting had a significant effect on bacterial metabolic characteristics and fungal trophic modes over the composting time. The function of the bacterial communities changed from environmental information processing to metabolism. Fungal communities changed as well, with the pathogenic fungi decreasing and wood saprotrophs increasing. These results indicated that open composting of Chinese herb residues not only influenced microbial community structure but also changed metabolic characteristics and trophic modes, which became the internal dynamics of composting.

Recognition of the neutral sugars conversion induced by bacterial community during lignocellulose wastes composting

The aim of this study was to explore the conversion characteristics of neutral sugars during different lignocellulose wastes composting from rice straw (RS), leaf (L) and mushroom dreg (MD). The results showed that the changes of neutral sugars were different during different wastes composting, but the changes of various hexose or pentose were similar during composting of the same material. The diversity of bacterial community led to different conversion characteristics of neutral sugars. During RS composting, each neutral sugar was transformed by a specific group of bacteria. However, a group of bacteria could transform multiple neutral sugars during MD and L composting. Furthermore, GM/AX value was first applied to composting, which could be used to characterize the conversion of neutral sugars during composting. This will help to provide more efficient recommendations for lignocellulose wastes treatment and accelerating humic substances synthesis during composting.

Aided Phytoremediation to Clean Up Dioxins/Furans-Aged Contaminated Soil: correlation between microbial communities and pollutant dissipation

To restore and clean up polluted soils, aided phytoremediation was found to be an effective, eco-friendly, and feasible approach in the case of many organic pollutants. However, little is known about its potential efficiency regarding polychlorinated dibenzo-p-dioxins and furans-contaminated soils. Thus, phytoremediation of aged dioxins/furans-contaminated soil was carried out through microcosm experiments vegetated with alfalfa combined with different amendments: an arbuscular mycorrhizal fungal inoculum (Funneliformis mosseae), a biosurfactant (rhamnolipids), a dioxins/furans degrading-bacterium (Sphingomonas wittichii RW1), and native microbiota. The total dioxins/furans dissipation was estimated to 23%, which corresponds to 48 ng.kg-1 of soil, after six months of culture in the vegetated soil combined with the four amendments compared to the non-vegetated soil. Our findings showed that the dioxins/furans dissipation resulted from the stimulation of soil microbial enzyme activities (fluorescein diacetate hydrolase and dehydrogenase) and the increase of bacterial abundance, richness, and diversity, as well as fungal diversity. Amplicon sequencing using Illumina MiSeq analysis led to identification of several bacterial (Bacillaceae, Sphingomonadaceae) and fungal (Chaetomium) groups known to be involved in dioxins/furans degradation. Furthermore, concomitant cytotoxicity and dioxins/furans concentration decreases were pointed out in the phytoremediated soil. The current study demonstrated the usefulness of combining different types of amendments to improve phytoremediation efficacy of aged dioxins/furans-contaminated soils.

Effects of exogenous protein-like precursors on humification process during lignocellulose-like biomass composting: Amino acids as the key linker to promote humification process

The aim of this study is to assess the effectiveness of protein-like precursors addition on promoting humification process during lignocellulose-like biomass composting through adding amino acids to compost. The humification indexes of R1 and R2 was significantly higher than that of CK (P < 0.05). The decreasing ratio of Maillard precursor concentration of R2 and R1 was higher than CK. Amino acids addition affected the bacteria community and environmental factors during composting. Variance partitioning analysis showed that humification process was strengthened with environmental factors, bacteria community, Maillard precursors. Structural equation model (SEM) analysis showed that amino acids had substantial impact on promoting humic acid (HA) formation. The combined application of protein-like wastes and lignocellulose-like wastes was suggested to improve carbon sequestration. This study lays a foundation for economically and effectively managing different types of straws by composting.

Characteristics of PCDD/Fs in soil and sediment samples collected from A-So former airbase in Central Vietnam

A-So airbase, located in A-Luoi Valley - Central Vietnam, is a former military base occupied by US Special Forces between 1963 and 1966. The storage of Agent Orange in A-So airbase during the Vietnam War now poses a high potential for PCDD/F contamination in soils and sediments. In order to evaluate the occurrence and characteristics of PCDD/Fs in A-So former airbase, which has been reserved for a long time and suffered almost no significant anthropogenic impacts, soil and sediment samples were collected from 40 sites of two adjacent zones A and B in an area of 160,000 m². Seventeen 2,3,7,8-substituted PCDD/Fs were analyzed using HRCG/HRMS (US EPA method 1613). Results indicate that concentrations of PCDD/Fs measured in zone A ranged from 95.0 to 4534 ng kg_dw^-1 (4.58 to 746 ng TEQ kg_dw^-1), while those in zone B were in the range of 80.8-4150 ng kg_dw^-1 (2.70-89.0 ng TEQ kg_dw^-1). The concentrations of PCDD/Fs observed in zone A are higher than those in zone B, suggesting that PCDD/Fs could be transported from zone A to zone B through surface soil erosion and runoff events. The main contributor to the total TEQ concentration was 2,3,7,8-TCDD, which was the indicator of Agent Orange contamination, accounting for 91 ± 9% and 72 ± 17% of the total TEQ concentrations measured in zones A and B, respectively. Comparison of PCDD/F concentrations in different soil layers reveals that the topsoil layer (at depth < 1 m) contributed 81-95% to the total PCDD/Fs in the study area, indicating that future remediation projects should focus on this topsoil layer. Since PCDD/F contamination in A-So airbase has not significantly improved for the last 20 years, remediation projects are urgently needed in order to mitigate the negative impacts of PCDD/F contamination on human health and wellbeing.