Oilfield waste treatment using novel hydrocarbon utilizing bacterial consortium - A microcosm approach

Isolation and characterization of novel hydrocarbon-degrading bacteria from oil polluted soil near Nacharam, Hyderabad, India

Petroleum is a vital and strategic energy resource for boosting a country's GDP. Despite its high economic value, it is considered a primary factor in environmental deterioration. Bioremediation strategies employ indigenous microbial strains to propose an economical and sustainable alternative to conventional remediation practices. The current study investigates the isolation, identification, and characterization of five novel biosurfactant-producing and petroleum hydrocarbon-degrading bacterial species: Rhodococcus indonesiensis strain SARSHI1, Pseudomonas aeruginosa strain SARSHI2, Pseudomonas argentinensis strain SARSHI3, Acinetobacter baumannii strain SARSHI4, and Rhodococcus qingshengii strain SARSHI5. Molecular identification was determined via 16S rRNA sequencing, and their taxonomic identities were validated through biochemical assessments. Their partial sequences were deposited in NCBI with accession numbers: 'PV034287', 'OP597529', 'OP584476', 'OQ711779', and 'OQ711775' respectively. Amongst them, R. indonesiensis exhibited the highest biosurfactant and hydrocarbon-degrading potential with a critical micelle concentration of 70 mg/L, reduced surface tension of 27 mN/m, an emulsification index (E24) of 85.34%, and hydrocarbon-degrading potency of up to 90%. Gravimetric analysis revealed up to 84% hydrocarbon degradation when supplemented with glycerol, and GC-MS analysis confirmed the selective degradation of n-alkanes (C18-C24). Structural studies employing NMR established the biosurfactant as a lipopeptide. Statistical optimization utilizing RSM - Box-Behnken design obtained the optimized conditions for enhanced biosurfactant and biodegradation activity. Microcosm studies further assessed SARSHI1's bioremediation potential under field-simulated treatments, achieving up to 95% degradation rates under the combined treatment of Bioaugmentation + Biostimulation + Biosurfactant (BA + BS + B), signifying the amplified bioavailability of hydrocarbons. Phytotoxicity tests confirmed the environmental impact of the bacterial strain. The results govern a robust framework for advancing microbial applications in environmental remediation and further support R. indonesiensis SARSHI1 for large-scale biotechnological paradigms.

Biocatalytic Potential of Pseudomonas Species in the Degradation of Polycyclic Aromatic Hydrocarbons

Polycyclic aromatic hydrocarbons (PAHs), one of the major environmental pollutants, produced from incomplete combustion of materials like coal, oil, gas, wood, and charbroiled meat, that contaminate the air, soil, and water, necessitating urgent remediation. Understanding the metabolic pathways for PAHs degradation is crucial to preventing environmental damage and health issues. Biological methods are gaining increasing interest due to their cost-effectiveness and environmental friendliness. These methods are particularly suitable for remediating PAHs contamination and mitigating associated risks. The paper also outlines the processes for biodegrading PAHs, emphasizing the function of Pseudomonas spp., a kind of bacterium recognized for its capacity to degrade PAHs. To eliminate PAHs from the environment and reduce threats to human health and the environment, Pseudomonas spp. is essential. Understanding the mechanism of PAH breakdown by means of microbes could lead to effective clean-up strategies. The review highlights the enzymatic capabilities, adaptability, and genetic versatility of the genes like nah and phn of Pseudomonas spp., which are involved in PAHs degradation pathways. Scientific evidence supports using Pseudomonas spp. as biocatalysts for PAHs clean-up, offering cost-effective and eco-friendly solutions.

Slow-release microencapsulates containing nanoliposomes for bioremediation of soil hydrocarbons contaminated

Encapsulation and nutrient addition in bacterial formulations have disadvantages concerning cell viability during release, storage, and under field conditions. Then, the objective of this work was to encapsulate a bacterial consortium with hydrocarbon-degrading capacities in different matrices composed of cross-linked alginate/ polyvinyl alcohol /halloysite beads (M1, M2, and M3) containing nanoliposomes loaded with or without nutrients and evaluate their viability and release in a liquid medium, and soil (microcosmos). Also, evaluate their capacity to remove total petroleum hydrocarbons (TPH) for 165 days and matrices characterization. The encapsulate consortium showed a quick adaptation to contaminated soil and a percentage of removal (PR) of TPH up to 30% after seven days. All the matrices displayed a PR of up to 90% after 165 days. The matrix M2 displayed significant resistance to degradation and higher cell viability with a PR of 94%. This result supports the encapsulation of bacteria in a sustainable matrix supplemented with nutrients as a well-looked strategy for improving viability and survival and, therefore, enhancing their effectiveness in the remediation of hydrocarbon-contaminated soils.

Unlocking bioremediation potential for site restoration: A comprehensive approach for crude oil degradation in agricultural soil and phytotoxicity assessment

Crude oil contamination has inflicted severe damage to soil ecosystems, necessitating effective remediation strategies. This study aimed to compare the efficacy of four different techniques (biostimulation, bioaugmentation, bioaugmentation + biostimulation, and natural attenuation) for remediating agricultural soil contaminated with crude oil using soil microcosms. A consortium of previously characterized bacteria Xanthomonas boreopolis, Microbacterium schleiferi, Pseudomonas aeruginosa, and Bacillus velezensis was constructed for bioaugmentation. The microbial count for the constructed consortium was recorded as 2.04 ± 0.11 × 108 CFU/g on 60 d in augmented and stimulated soil samples revealing their potential to thrive in chemically contaminated-stress conditions. The microbial consortium through bioaugmentation + biostimulation approach resulted in 79 ± 0.92% degradation of the total polyaromatic hydrocarbons (2 and 3 rings ∼ 74%, 4 and 5 rings ∼ 83% loss) whereas, 91 ± 0.56% degradation of total aliphatic hydrocarbons (C8-C16 ∼ 90%, C18-C28 ∼ 92%, C30 to C40 ∼ 88% loss) was observed in 60 d. Further, after 60 d of microcosm treatment, the treated soil samples were used for phytotoxicity assessment using wheat (Triticum aestivum), black chickpea (Cicer arietinum), and mustard (Brassica juncea). The germination rates for wheat (90%), black chickpea (100%), and mustard (100%) were observed in 7 d with improved shoot-root length and biomass in both bioaugmentation and biostimulation approaches. This study projects a comprehensive approach integrating bacterial consortium and nutrient augmentation strategies and underscores the vital role of innovative environmental management practices in fostering sustainable remediation of oil-contaminated soil ecosystems. The formulated bacterial consortium with a nutrient augmentation strategy can be utilized to restore agricultural lands towards reduced phytotoxicity and improved plant growth.

Application of biochar on soil bioelectrochemical remediation: behind roles, progress, and potential

Bioelectrochemical systems (BESs) that combine electrochemistry with biological methods have gained attention in the remediation of polluted environments, including wastewater, sludge, sediments, and soils. The most attractive advantage of BESs is that the solid electrode is used as an inexhaustible electron acceptor or donor, and biocurrent directly converted from organics can afford the reaction energy of contaminant breakdown, crossing the internal energy barrier of endothermic degradation, which achieves a continuous biodegradation process without the simultaneous use of exogenetic chemicals and bioelectricity recovery. However, soil BESs are hindered by expensive electrode materials, difficult pollutant and electron transfer, low microbial competitive activity, and biocompatibility in contamination remediation. Fortunately, introducing biochar into soil BESs could reveal a high potential in addressing these BES inadequacies. The characteristics of biochar, e.g., conductivity, transferability, high specific surface area, high porosity, large functional groups, and biocompatibility, can improve the performance of soil BESs. In fact, biochar not only carries electrons but also transfers nutrients, pollutants, and even bacteria by facilitating transmission in the bioelectric field of BESs. Consequently, the abilities of biochar make for better functionality of BESs. This review collates information on the roles, application, and progress of biochar in soil BESs, and future prospects are given. It is beneficial for environmental researchers and engineers to extend BES application in environmental remediation and to assist the progress of carbon sequestration and emission reduction based on the inertia of biochar and the blocking of electron flow to form methane.

Holistic approach to waste mobil oil bioremediation: Valorizing waste through biosurfactant production for soil restoration

The combustion of mobil oil leads to the emission of toxic compounds in the environment. In this study, the aromatic and aliphatic hydrocarbon fractions present in a waste mobil oil collected from automobile market were comprehensively identified and their toxicity was evaluated using wheat grain. Lysinibacillus sphaericus strain IITR51 isolated and characterized previously could degrade 30-80% of both aliphatic and aromatic hydrocarbons in liquid culture. Interestingly, the strain IITR51 produced 627 mg/L of rhamnolipid biosurfactant by utilizing 3% (v/v) of waste mobil oil in the presence of 1.5% glycerol as additional carbon source. In a soil microcosm study by employing strain IITR51, 50-86% of 3-6 ring aromatic hydrocarbons and 63-98% of aliphatic hydrocarbons (C8 to C22) were degraded. Addition of 60 μg/mL rhamnolipid biosurfactant enhanced the degradation of both aliphatic and aromatic hydrocarbons from 76.88% to 61.21%-94.11% and 78.27% respectively. The degradation of mobil oil components improved the soil physico-chemical properties and increased soil fertility to 64% as evident by the phytotoxicity assessments. The findings indicate that strain IITR51 with degradation capability coupled with biosurfactant production could be a candidate for restoring hydrocarbon contaminated soils.

Genetic engineering of the branched-chain fatty acid biosynthesis pathway to enhance surfactin production from Bacillus subtilis

Surfactin, which is composed of a β-hydroxy fatty acid chain and a peptide ring, has drawn considerable attention due to its potential applications in the biomedicine, bioremediation, and petroleum industries. However, the low yield of surfactin from wild strains still restricts its industrial applications. In this study, eight genes relevant to the fatty acid biosynthesis pathway were targeted to enhance surfactin production, and high surfactin-yielding strains with potential industrial applications were obtained. When ldeHA and acc were co-overexpressed, the surfactin yield of recombinant strains TDS8 and TPS8 increased to 1.55- and 1.19-fold of their parental strains, respectively, again proving that the conversion of acetyl-coenzyme A (CoA) to malonyl-CoA is the rate-limiting step in fatty acid biosynthesis. Furthermore, changes in surfactin isoforms of recombinant strain TPS8 suggest that the fatty acid precursor synthesis pathway can be modified to improve the proportion of different isoforms. In addition, the deletion of lpdV, which is responsible for the conversion of α-ketoacyl-CoA precursors, resulted in a sharp decrease in surfactin production, further demonstrating the importance of branched-chain fatty acid biosynthesis in surfactin production. This work will facilitate the design and construction of more efficiently engineered strains for surfactin production and further extend industrial applications.

Quantitative analysis of biosurfactants in water samples by a modified oil spreading technique†

The oil spreading technique relies on biosurfactant to reduce the surface tension of an oil film and form an oil spreading ring in the center, and then judges the content of biosurfactant according to the diameter of the spreading ring. However, the instability and large errors of the traditional oil spreading technique limit its further application. In this paper, we modified the traditional oil spreading technique by optimizing the oily material, image acquisition and calculation method, which improves the accuracy and stability of the quantification of biosurfactant. We screened lipopeptides and glycolipid biosurfactants for rapid and quantitative analysis of biosurfactant concentrations. By selecting areas by color done by the software to modify image acquisition, the results showed that the modified oil spreading technique has a good quantitative effect, reflected in the concentration of biosurfactant being proportional to the diameter of the sample droplet. More importantly, using the pixel ratio method instead of the diameter measurement method to optimize the calculation method, the region selection was more exact, and the accuracy of the data results was high, and the calculation efficiency was improved significantly. Finally, the contents of rhamnolipid and lipopeptide in oilfield water samples were judged by the modified oil spreading technique, the relative errors were analyzed according to the different substances as the standard, and the quantitative measurement and analysis of oilfield water samples (the produced water of Zhan 3-X24 and the injected water of the estuary oil production plant) were realized. The study provides a new perspective on the accuracy and stability of the method in the quantification of biosurfactant, and provided some theoretical and data support for the study of the microbial oil displacement technology mechanism.

The oil spreading technique relies on biosurfactant to reduce the surface tension of an oil film and form an oil spreading ring in the center, and then judges the content of biosurfactant according to the diameter of the spreading ring.

Comparison of the efficiency and microbial mechanisms of chemical- and bio-surfactants in remediation of petroleum hydrocarbon

Surfactant-enhanced remediation (SER) is one of the most effective methods for petroleum hydrocarbon-contaminated sites compared to single physical and chemical methods. However, biosurfactants are not as commonly used as chemical surfactants, and the actual remediation effects and related mechanisms remain undefined. Therefore, to comprehensively compare the remediation effects and biological mechanisms of biosurfactants and chemical surfactants, soil column leaching experiments including two biosurfactants (rhamnolipids and lipopeptide) and three commercially used chemical surfactants (Tween 80, Triton X-100, and Berol 226SA) were conducted. After seven days of leaching, rhamnolipids exhibited the highest petroleum hydrocarbon removal rate of 61.01%, which was superior to that of chemical surfactants (11.73-18.75%) in n-alkanes C10-C30. Meanwhile, rhamnolipids exhibited a great degradation advantage of n-alkanes C13-C28, which was 1.22-30.55 times that of chemical surfactants. Compared to chemical surfactants, biosurfactants significantly upregulated the soil's biological functions, including soil conductivity (80.90-155.56%), and soil enzyme activities of lipase (90.31-497.10%), dehydrogenase (325.00-655.56%), core enzyme activities of petroleum hydrocarbon degradation, and quorum sensing between species. Biosurfactants significantly changed the composition of Pseudomonas, Citrobacter, Acidobacteriota, and Enterobacter at the genus level. Meanwhile, chemical surfactants had less influence on the bacterial community and interactions between species. Moreover, the biosurfactants enhanced the microbial interactions and centrality of petroleum hydrocarbon degraders in the community based on the network. Overall, this work provides a systematic comparison and understanding of the chemical- and bio-surfactants used in bioremediation. In the future, we intend to apply biosurfactants to practical petroleum hydrocarbon-contaminated fields to observe realistic remediation effects and compare their functional mechanisms.

Pseudomonas veronii strain 7-41 degrading medium-chain n-alkanes and polycyclic aromatic hydrocarbons

Pollution of the environment by crude oil and oil products (represented by various types of compounds, mainly aliphatic, mono- and polyaromatic hydrocarbons) poses a global problem. The strain Pseudomonas veronii 7-41 can grow on medium-chain n-alkanes (C₈-C₁₂) and polycyclic aromatic hydrocarbons such as naphthalene. We performed a genetic analysis and physiological/biochemical characterization of strain 7-41 cultivated in a mineral medium with decane, naphthalene or a mixture of the hydrocarbons. The genes responsible for the degradation of alkanes and PAHs are on the IncP-7 conjugative plasmid and are organized into the alk and nah operons typical of pseudomonads. A natural plasmid carrying functional operons for the degradation of two different classes of hydrocarbons was first described. In monosubstrate systems, 28.4% and 68.8% of decane and naphthalene, respectively, were biodegraded by the late stationary growth phase. In a bisubstrate system, these parameters were 25.4% and 20.8% by the end of the exponential growth phase. Then the biodegradation stopped, and the bacterial culture started dying due to the accumulation of salicylate (naphthalene-degradation metabolite), which is toxic in high concentrations. The activity of the salicylate oxidation enzymes was below the detection limit. These results indicate that the presence of decane and a high concentration of salicylate lead to impairment of hydrocarbon degradation by the strain.

Exploring bacterial communities through metagenomics during bioremediation of polycyclic aromatic hydrocarbons from contaminated sediments

The goal of this study was to evaluate the degradation effectiveness of PAHs degrading bacteria at the mesocosm level, including Stenotrophomonas maltophilia (SC), mixed culture (MC), and enriched native microflora (EC) at the mesocosm level. Maximum degradation was found in the mesocosm MC (26.67 %), followed by SC (25.08 %) and EC (18.25 %) after 60 days. Thus, mixed culture and Stenotrophomonas maltophilia could be a game changer in the PAHs bioremediation at the chronically contaminated sites. MiSeq sequencing has revealed dominancy of γ-Proteobacteria, α-Proteobacteria, β-Proteobacteria at class level and Sphingomonadales, oceanospirillales, Rhodothermales at Order level. Families Alcanivoracaceae, Alteromonadaceae, Nocardiaceae, Rhodospirillaceae and genus Stenotrophomonas, Alcanivorax, Methylophaga, Fluviicola and Rhodoplanes were considerably increased which play key role in the PAHs degradation. Dominant bacterial communities have revealed resilience community to enable potential PAHs degradation process in all the mesocosms. To the best our knowledge this is the first ever attempt in PAHs biodegradation study conducted at the mesocosm level mimicking natural environmental conditions. Consequently, this study could be a benchmark against which future progress studies for the policy makers and stakeholders to design appropriate bioremediation study for the historically PAHs polluted contaminate sites.

Prospective review on bioelectrochemical systems for wastewater treatment: Achievements, hindrances and role in sustainable environment

Bioelectrochemical systems (BESs) are a relatively new arena for producing bioelectricity, desalinating sea water, and treating industrial effluents by removing organic matter. Microbial electrochemical technologies (METs) are promising for obtaining value-added products during simultaneous remediation of pollutants from wastewater. The search for more affordable desalination technology has led to the development of microbial desalination cells (MDCs). MDC combines the operation of microbial fuel cells (MFC) with electrodialysis for water desalination and energy generation. It has received notable interest of researchers in desalination and wastewater treatment because of low energy requirement and eco-friendly nature. Firstly, this article provides a brief overview of MDC technology. Secondly, factors affecting functioning of MDC and its applications have been accentuated. Additionally, challenges and future outlook on the development of this technology have been delineated. State-of-the-art information provided in this review would expand the scope of interdisciplinary and translational research.

Biotreatment of oily sludge by a bacterial consortium: Effect of bioprocess conditions on biodegradation efficiency and bacterial community structure

We studied the biodegradation of oily sludge generated by a petroleum plant in Bahrain by a bacterial consortium (termed as AK6) under different bioprocess conditions. Biodegradation of petroleum hydrocarbons in oily sludge (C₁₁-C₂₉) increased from 24% after two days to 99% after 9 days of incubation in cultures containing 5% (w/v) of oily sludge at 40°C. When the nitrogen source was excluded from the batch cultures, hydrocarbon biodegradation dropped to 45% within 7 days. The hydrocarbon biodegradation decreased also by increasing the salinity to 3% and the temperature above 40°C. AK6 tolerated up to 50% (w/v) oily sludge and degraded 60% of the dichloromethane-extractable oil fraction. Illumina-MiSeq analyses revealed that the AK6 consortium was mainly composed of Gammaproteobacteria (ca. 98% of total sequences), with most sequences belonging to Klebsiella (77.6% of total sequences), Enterobacter (16.7%) and Salmonella (5%). Prominent shifts in the bacterial composition of the consortium were observed when the temperature and initial sludge concentration increased, and the nitrogen source was excluded, favoring sequences belonging to Pseudomonas and Stenotrophomonas. The AK6 consortium is endowed with a strong oily sludge tolerance and biodegradation capability under different bioprocess conditions, where Pseudomonas spp. appear to be crucial for hydrocarbon biodegradation.

Efficient removal of tar employing dolomite catalyst in gasification: Challenges and opportunities

Fossil fuels are currently the dominant source of electricity and energy production around the world. Biomass is one of the most referred renewable carbonaceous resource(s) that can be employed for the waste-to-energy concept. Syngas obtained from biomass gasification can be utilized for a variety of key industrial purposes, including internal gasification engine operation, power generation, and hydrocarbon compound production using the Fisher-Tropsch technique. However, the existence of impurities such as hydrogen sulfide, tar, and particulate matter along with other undesirable chemicals present in syngas are major disadvantages of biomass gasification. Tar is the most difficult among all the pollutants to be removed from syngas; it also causes serious problems in downstream syngas applications. For decades, studies have been performed with various catalysts to remove the tar. Dolomite has shown positive response for tar elimination and hydrogen-enriched gas production. Several studies have been carried out on dolomite for eliminating the tar from syngas. This review encompasses sources of solid waste, the mechanism of catalysis, and in-situ and ex-situ usage of dolomite in the gasification process. It addresses the key issues such as fragmentation and attrition, elutriation, and coke formation along with dolomite's usefulness in amalgamation with other catalysts, environmental consequences, and economic viability of dolomite applications. It also discusses the challenges and opportunities for tar removal using catalysts, with a specific focus on dolomite along with economic and environmental sustainability considerations.

Sustainable strategies for combating hydrocarbon pollution: Special emphasis on mobil oil bioremediation

The global rise in industrialization and vehicularization has led to the increasing trend in the use of different crude oil types. Among these mobil oil has major application in automobiles and different machines. The combustion of mobil oil renders a non-usable form that ultimately enters the environment thereby causing problems to environmental health. The aliphatic and aromatic hydrocarbon fraction of mobil oil has serious human and environmental health hazards. These components upon interaction with soil affect its fertility and microbial diversity. The recent advancement in the omics approach viz. metagenomics, metatranscriptomics and metaproteomics has led to increased efficiency for the use of microbial based remediation strategy. Additionally, the use of biosurfactants further aids in increasing the bioavailability and thus biodegradation of crude oil constituents. The combination of more than one approach could serve as an effective tool for efficient reduction of oil contamination from diverse ecosystems. To the best of our knowledge only a few publications on mobil oil have been published in the last decade. This systematic review could be extremely useful in designing a micro-bioremediation strategy for aquatic and terrestrial ecosystems contaminated with mobil oil or petroleum hydrocarbons that is both efficient and feasible. The state-of-art information and future research directions have been discussed to address the issue efficiently.

Biochar production with amelioration of microwave-assisted pyrolysis: Current scenario, drawbacks and perspectives

In recent years, biomass has been reported to obtain a wide range of value-added products. Biochar can be obtained by heating biomass, which aids in carbon sinks, soil amendments, resource recovery, and water retention. Microwave technology stands out among various biomass heating technologies not only for its effectiveness in biomass pyrolysis for the production of biochar and biofuel but also for its speed, volumetrics, selectivity, and efficiency. The features of microwave-assisted biomass pyrolysis and biochar are briefly reviewed in this paper. An informative comparison has been drawn between microwave-assisted pyrolysis and conventional pyrolysis. It focuses mainly on technological and economic scenario of biochar production and environmental impacts of using biochar. This source of knowledge would aid in the exploration of new possibilities and scope for employing microwave-assisted pyrolysis technology to produce biochar.

Mycoremediation of lignocellulosic biorefinery sludge: A reinvigorating approach for organic contaminants remediation with simultaneous production of lignocellulolytic enzyme cocktail

This research work aims to valorize lignocellulosic biorefinery sludge with genetically engineered Trichoderma atroviride for simultaneous removal of organic contaminants, fermentation inhibitors, and lignocellulolytic enzyme cocktail production. Upon analysis, three phenolic compounds (42.6 ± 3.6 μg/g), two polycyclic aromatic hydrocarbons (0.42 ± 0.06 μg/g) and five fermentation inhibitors (2.5 ± 0.3 mg/g) were detected in the sludge. Bioaugmentation of sludge with 72 h-old T. atroviride (5%) results in the production of cellulase (21 U/g), xylanase (84 U/g), laccase (20 U/g), lignin peroxidase (14 U/g) and aryl alcohol oxidase (116 U/g), along with the concomitant removal of organic contaminants (phenol, 2, 4-dinitrophenol, pentchlorophenol, phenanthrene, benzo(a)pyrene) and fermentation inhibitors (furfural, 5-hydroxymethylfurfural, levulinic acid, ferulic acid, and catechol). Subsequently, the enrichment of sludge with nutrients and rhamnolipids enhanced the enzyme production by 5-6-fold and resulted in the removal of 85-95% of organic contaminants and fermentation inhibitors, which constitutes an eco-friendly process.

Optimization of conditions for a surfactant-producing strain and application to petroleum hydrocarbon-contaminated soil bioremediation

Petroleum hydrocarbon-contaminated sites have been mainly remediated through the surfactant-enhanced soil leaching method. However, the commonly used chemical surfactants have poor biocompatibility and are prone to form residues in fields. Therefore, the purpose of this research is to establish an effective system of biosurfactant remediation in the field and provide instructions for common bioremediation challenges. First, wild-type Bacillus amyloliquefaciens A3, which produced lipopeptide biosurfactant, was used to improve the production of biosurfactant by atmosphere and room temperature plasma (ARTP) mutagenesis. Second, the mutant 1-24 was selected from a total of 174 mutants due to the outstanding yield. Subsequently, 1-24 was applied in the soil column leaching experiments and removed 45.44% of petroleum hydrocarbons by changing the relevant enzyme activities. Biosurfactant addition and 1-24 inoculation effectively activated a portion of the petroleum hydrocarbons in the soil columns, and 1-24 presented potential as a desired candidate for bioremediation. This is the first report of using ARTP mutagenesis to improve the production of biosurfactants. Simultaneously, we first propose a theoretical system in which the yield of biosurfactant was increased using ARTP mutagenesis for strains and applied the mutants in situ soil bioremediation. This research indicated that the theoretical system was useful in soil columns to simulate field remediation conditions, providing practical references for the bioremediation of contaminated soil.

Microbial electrolysis: a promising approach for treatment and resource recovery from industrial wastewater

Wastewater is one of the most common by-products of almost every industrial process. Treatment of wastewater alone, before disposal, necessitates an excess of energy. Environmental concerns over the use of fossil fuels as a source of energy have prompted a surge in demand for alternative energy sources and the development of sophisticated procedures to extract energy from unconventional sources. Treatment of municipal and industrial wastewater alone accounts for about 3% of global electricity use while the amount of energy embedded in the waste is at least 2–4 times greater than the energy required to treat the same effluent. The microbial electrolysis cell (MEC) is one of the most efficient technologies for waste-to-product conversion that uses electrochemically active bacteria to convert organic matter into hydrogen or a variety of by-products without polluting the environment. This paper highlights existing obstacles and future potential in the integration of Microbial Electrolysis Cell with other processes like anaerobic digestion coupled system, anaerobic membrane bioreactor and thermoelectric micro converter.

Trends in mitigation of industrial waste: Global health hazards, environmental implications and waste derived economy for environmental sustainability

Majority of industries, in order to meet the technological development and consumer demands generate waste. The untreated waste spreads out toxic and harmful substances in the environment which serves as a breeding ground for pathogenic microorganisms thus causing severe health hazards. The three industrial sectors namely food, agriculture, and oil industry are among the primary organic waste producers that affect urban health and economic growth. Conventional treatment generates a significant amount of greenhouse gases which further contributes to global warming. Thus, the use of microbes for utilization of this waste, liberating CO₂ offers an indispensable tool. The simultaneous production of value-added products such as bioplastics, biofuels, and biosurfactants increases the economics of the process and contributes to environmental sustainability. This review comprehensively summarized the composition of organic waste generated from the food, agriculture, and oil industry. The linkages between global health hazards of industrial waste and environmental implications have been uncovered. Stare-of-the-art information on their subsequent utilization as a substrate to produce value-added products through bio-routes has been elaborated. The research gaps, economical perspective(s), and future research directions have been identified and discussed to strengthen environmental sustainability.

Azole fungicides: (Bio)degradation, transformation products and toxicity elucidation

The increasing consumption of azole antifungal agents leads to their uncontrolled release into the environment. Therefore, it is crucial to remove their residues from natural ecosystems. This study aimed to examine the biological and chemical degradation of four typical azole fungicides: fluconazole (Fc), clotrimazole (Cl), climbazole (Cb), and epoxiconazole (Ep). The biodegradation was investigated using activated sludge and two novel Gram-negative bacterial strains. The chemical degradation experiments aimed to assess the efficiency of fungicides removal through UV treatment, the Fenton reaction, and a combination of these methods. Transformation products of Cb, Ep, and Cl photocatalytic removal were identified by mass spectrometry. In addition, the AlamarBlue® Assay and the MTT Assay allowed careful evaluation of the toxicity of azole derivatives and their transformation products towards newly isolated strains, Stenotrophomonas maltophilia AsPCl2.3 and Pseudomonas monteilii LB2. Among all azole fungicides, Cb was the most susceptible to biological removal while Fc, Ep, and Cl were basically resistant to biodegradation. Cl and Ep showed a significant biosorption on the activated sludge. Under optimized photolysis conditions, the removal efficiency of Cl, Cb, and Ep was significantly higher than that of biodegradation. The Fenton reaction supported by the UV-irradiation offered the best results of fungicides elimination. After 1 min of the experiment, Cl was almost completely removed while Cb and Ep removal rates reached an average of 60%. The proposed main degradation route of azole fungicides during UV-irradiation includes halogen atoms substitution by hydroxyl moieties. The final degradation product was imidazole or triazole. Azole fungicides and their transformation products differently affected the metabolic activity of Gram-negative bacteria. Cl and Cb intermediates showed lower toxicity than parent compounds. The findings help better understand the environmental impact of azole fungicides, their degradation, and toxicity. They also stress the need for reducing their uncontrolled release to the environment.

Valorization of agro-industrial wastes for biorefinery process and circular bioeconomy: A critical review

Energy recovery from waste resources is a promising approach towards environmental consequences. In the prospect of environmental sustainability, utilization of agro-industrial waste residues as feedstock for biorefinery processes have gained widespread attention. In the agro-industry, various biomasses are exposed to different unit processes for offering value to various agro-industrial waste materials. Agro-industrial wastes can generate a substantial amount of valuable products such as fuels, chemicals, energy, electricity, and by-products. This paper reviews the methodologies for valorization of agro-industrial wastes and their exploitation for generation of renewable energy products. In addition, management of agro-industrial wastes and products from agro-industrial wastes have been elaborated. The waste biorefinery process using agro-industrial wastes does not only offer energy, it also offers environmentally sustainable modes, which address effective management of waste streams. This review aims to highlight the cascading use of biomass from agro-industrial wastes into the systemic approach for economic development.

Factors Influencing the Bacterial Bioremediation of Hydrocarbon Contaminants in the Soil: Mechanisms and Impacts

The discharge of hydrocarbons and their derivatives to environments due to human and/or natural activities cause environmental pollution (soil, water, and air) and affect the natural functioning of an ecosystem. To minimize or eradicate environmental pollution by hydrocarbon contaminants, studies showed strategies including physical, chemical, and biological approaches. Among those strategies, the use of biological techniques (especially bacterial biodegradation) is critically important to remove hydrocarbon contaminants. The current review discusses the insights of major factors that enhance or hinder the bacterial bioremediation of hydrocarbon contaminants (aliphatic, aromatic, and polyaromatic hydrocarbons) in the soil. The key factors limiting the overall hydrocarbon biodegradation are generally categorized as biotic factors and abiotic factors. Among various environmental factors, temperature range from 30 to 40°C, pH range from 5 to 8, moisture availability range from 30 to 90%, carbon/nitrogen/phosphorous (C/N/P; 100:20:1) ratio, and 10–40% of oxygen for aerobic degradation are the key factors that show positive correlation for greatest hydrocarbon biodegradation rate by altering the activities of the microbial and degradative enzymes in soil. In addition, the formation of biofilm and production of biosurfactants in hydrocarbon-polluted soil environments increase microbial adaptation to low bioavailability of hydrophobic compounds, and genes that encode for hydrocarbon degradative enzymes are critical for the potential of microbes to bioremediate soils contaminated with hydrocarbon pollutants. Therefore, this review works on the identification of factors for effective hydrocarbon biodegradation, understanding, and optimization of those factors that are essential and critical.

A review on biosurfactants: properties, applications and current developments

Microbial surfactants are a large number of amphipathic biomolecules with a myriad of biomolecule constituents from various microbial sources that have been studied for their surface tension reduction activities. With unique properties, their applications have been increased in different areas including environment, medicine, healthcare, agriculture and industries. The present review aims to study the biochemistry and biosynthesis of biosurfactants exhibiting varying biomolecular structures which are produced by different microbial sources. It also provides details on roles played by biosurfactants in nature as well as their potential applications in various sectors. Basic biomolecule content of all the biosurfactants studied showed presence of carbohydrates, aminoacids, lipids and fattyacids. The data presented here would help in designing, synthesis and application of tailor-made novel biosurfactants. This would pave a way for perspectives of research on biosurfactants to overcome the existing bottlenecks in this field.

Worms eat oil: Alcanivorax borkumensis hydrocarbonoclastic bacteria colonise Caenorhabditis elegans nematodes intestines as a first step towards oil spills zooremediation

The environmental hazards of oil spills cannot be underestimated. Bioremediation holds promise among various approaches to tackle oil spills in soils and sediments. In particular, using oil-degrading bacteria is an efficient and self-regulating way to remove oil spills. Using animals for oil spills remediation is in its infancy, mostly due to the lack of efficient oil-degrading capabilities in eukaryotes. Here we show that Caenorhabditis elegans nematodes survive for extended periods (up to 22 days) on pure crude oil diet. Moreover, we report for the first time the use of Alcanivorax borkumensis hydrocarbonoclastic bacteria for colonisation of C. elegans intestines, which allows for effective digestion of crude oil by the nematodes. The worms fed and colonised by A. borkumensis demonstrated the similar or even better longevity, resistance against oxidative and thermal stress and reproductivity as those animals fed with Escherichia coli bacteria (normal food). Importantly, A. borkumensis-carrying nematodes were able to accumulate oil droplet from oil-contaminated soils. Artificial colonisation of soil invertebrates with oil-degrading bacteria will be an efficient way to distribute microorganisms in polluted soil, thus opening new avenues for oil spills zooremediation.

Bioaugmentation of Pseudomonas aeruginosa NCIM 5514 - A novel oily waste degrader for treatment of petroleum hydrocarbons

This study was aimed at remediation ofoily waste contaminated area by utilizing a newly obtained bacterium. For experimental setup three different approachessuch as bioaugmentation, natural attenuation and abiotic factors were employed. In bioaugmented experimental set up (treatment withP. aeruginosaNCIM 5514),76.14 ± 0.85% loss in oily waste with notable hydrocarbon utilizers was noted in 56 days. From the results, it was concluded that bioaugmentation with novel P. aeruginosasp. (oily waste degrader) could remediate oily waste pollution effectively. Results of this study demonstrate applicability of P. aeruginosa NCIM 5514 for environmental sustainability.