In situ nanoremediation of soils and groundwaters from the nanoparticle's standpoint: A review

In situ stabilization of antimony and arsenic in co-contaminated soil using organic matter-Fe/Mn (hydr)oxides colloids and their mineral phase transformation

Natural organic matter (NOM) containing Fe/Mn (hydr)oxides effectively stabilizes antimony (Sb) and arsenic (As) in soils. However, the specific type of NOM that limits the mobility of Fe/Mn (hydr)oxides and how NOM-Fe/Mn colloidal properties can be modulated for better Sb and As stabilization remains unclear. This study suggests that the degree of stabilization of the colloidal structure formed between NOM and Fe/Mn (hydr)oxides is crucial for Sb and As stabilization. It was found that straw-derived (SD), compared to humic acid (HA) with a high content of carboxyl groups, forms more stable colloidal structures with Fe/Mn (hydr)oxides. HA-Fe/Mn colloids show greater mobility and less deposition than SD-Fe/Mn colloids. In soil remediation simulations, SD-Fe/Mn colloids more effectively stabilized Sb and As. After 35 days, SD-Fe/Mn achieved nearly complete stabilization (100 %) of water-soluble and decarbonate-extracted bioavailable fractions at depths of 1-12 cm, with high rates for other fractions as well. Even at depths of 23-34 cm, SD-Fe/Mn outperformed HA-Fe/Mn, showing higher stabilization rates for Sb and As by 12.6 % and 20.4 %, respectively. Morphological analysis suggests that the stabilization of Sb and As by SD-Fe/Mn primarily involves adsorption onto or incorporation within the Fe/Mn (hydr)oxides. This study offers guidance for optimizing NOM-Fe/Mn for in situ stabilization of Sb and As, enhances the understanding of different types of NOM that affect the behavior of Sb and As soil contamination, and presents new perspectives for developing effective in situ remediation materials.

Green synthesized nanoscale zero-valent iron impregnated tea residue biochar efficiently captures metal(loid)s for sustainable water remediation

Pristine or modified nanoscale zero-valent iron (nZVI) synthesized though conventional chemical reduction have been widely recommended for remediating metal(loid)-contaminated water. However, their eco-friendliness is often challenged with the concomitant bio-toxicity and secondary environmental risks. Alternatively, this study utilized waste tea leaves extract and remaining residue as the reducing agent and pyrolytic matrix to innovatively fabricate a green synthesized nZVI impregnated tea residue biochar (G-nZVI/TB). Since the performances, mechanisms, and potential applications of G-nZVI/TB for simultaneous removal of metal cation and metalloid anion remain unclear, typical synthetic aqueous solutions and real wastewaters were systematically tested. The adsorption isotherms showed that the calculated maximum adsorption capacities of G-nZVI/TB for various meta(loid)s were 1.4-10.7 fold higher than those of TB. Although Cd(II) competed with Pb(II) for adsorption on G-nZVI/TB, they synergistically promoted As(III) sequestration. The SEM and FTIR spectra demonstrated that G-nZVI nanoparticles were uniformly dispersed onto TB framework, whereas newly grafted groups like Fe-O, C=O, and C-N accelerated metal(loid)s bonding. The results of batch experiments, XRD, and XPS comprehensively elucidated that metal(loid)s were predominantly separated from polynary systems via electrostatic adsorption, ion exchange, co-precipitation, cation-π interaction, oxidation-complexation, and B-type ternary complexation. In synthetic industrial wastewater and real paddy field drainage with divergent environmental conditions, 0.5 g L-1 optimized G-nZVI/TB efficiently captured over 92.4% metal(loid)s at their concentrations ranging from 0.04 to 3 mg L-1, indicating its excellent selective adsorption effectiveness and extensive compatibility for practical application in reusing multi-metal(loid)s contaminated wastewater. Overall, these findings provide new insights into developing green nano-functional materials for sustainable water purification.

Non-phytoremediation and phytoremediation technologies of integrated remediation for water and soil heavy metal pollution: A comprehensive review

Since the 1980s, there has been increasing concern over heavy metal pollution remediation. However, most research focused on the individual remediation technologies for heavy metal pollutants in either soil or water. Considering the potential migration of these pollutants, it is necessary to explore effective integrated remediation technologies for soil and water heavy metals. This review thoroughly examines non-phytoremediation technologies likes physical, chemical, and microbial remediation, as well as green remediation approaches involving terrestrial and aquatic phytoremediation. Non-phytoremediation technologies suffer from disadvantages like high costs, secondary pollution risks, and susceptibility to environmental factors. Conversely, phytoremediation technologies have gained significant attention due to their sustainable and environmentally friendly nature. Enhancements through chelating agents, biochar, microorganisms, and genetic engineering have demonstrated improved phytoremediation remediation efficiency. However, it is essential to address the environmental and ecological risks that may arise from the prolonged utilization of these materials and technologies. Lastly, this paper presents an overview of integrated remediation approaches for addressing heavy metal contamination in groundwater-soil-surface water systems and discusses the reasons for the research gaps and future directions. This paper offers valuable insights for comprehensive solutions to heavy metal pollution in water and soil, promoting integrated remediation and sustainable development.

A review of passive acid mine drainage treatment by PRB and LPB: From design, testing, to construction

An extensive volume of acid mine drainage (AMD) generated throughout the mining process has been widely regarded as one of the most catastrophic environmental problems. Surface water and groundwater impacted by pollution exhibit extreme low pH values and elevated sulfate and metal/metalloid concentrations, posing a serious threat to the production efficiency of enterprises, domestic water safety, and the ecological health of the basin. Over the recent years, a plethora of techniques has been developed to address the issue of AMD, encompassing nanofiltration membranes, lime neutralization, and carrier-microencapsulation. Nonetheless, these approaches often come with substantial financial implications and exhibit restricted long-term sustainability. Among the array of choices, the permeable reactive barrier (PRB) system emerges as a noteworthy passive remediation method for AMD. Distinguished by its modest construction expenses and enduring stability, this approach proves particularly well-suited for addressing the environmental challenges posed by abandoned mines. This study undertook a comprehensive evaluation of the PRB systems utilized in the remediation of AMD. Furthermore, it introduced the concept of low permeability barrier, derived from the realm of site-contaminated groundwater management. The strategies pertaining to the selection of materials, the physicochemical aspects influencing long-term efficacy, the intricacies of design and construction, as well as the challenges and prospects inherent in barrier technology, are elaborated upon in this discourse.

Effects of environmental metal and metalloid pollutants on plants and human health: exploring nano-remediation approach

Metal and metalloid pollutants severely threatens environmental ecosystems and human health, necessitating effective remediation strategies. Nanoparticle (NPs)-based approaches have gained significant attention as promising solutions for efficient removing heavy metals from various environmental matrices. The present review is focused on green synthesized NPs-mediated remediation such as the implementation of iron, carbon-based nanomaterials, metal oxides, and bio-based NPs. The review also explores the mechanisms of NPs interactions with heavy metals, including adsorption, precipitation, and redox reactions. Critical factors influencing the remediation efficiency, such as NPs size, surface charge, and composition, are systematically examined. Furthermore, the environmental fate, transport, and potential risks associated with the application of NPs are critically evaluated. The review also highlights various sources of metal and metalloid pollutants and their impact on human health and translocation in plant tissues. Prospects and challenges in translating NPs-based remediation from laboratory research to real-world applications are proposed. The current work will be helpful to direct future research endeavors and promote the sustainable implementation of metal and metalloid elimination.

Fe(II) coordination transition regulates reductive dechlorination: The overlooked abiotic role of lactate

The coordination environment of Fe(II) significantly affect the reductive reactivity of Fe(II). Lactate is a common substrate for enhancing microbial dechlorination, but its effect on abiotic Fe(II)-driven reductive dechlorination is largely ignored. In this study, the structure-reactivity relationship of Fe(II) is investigated by regulating the ratio of lactate:Fe(II). This work shows that lactate-Fe(II) complexing enhances the abiotic Fe(II)-driven reductive dechlorination with the optimum lactate:Fe(II) ratio of 10:20. The formed hydrogen bond (Fe-OH∙∙∙∙∙∙O = C-) and Fe-O-C metal-ligand bond result in a reduced Fe(II) coordination number from six to four, which lead to the transition of Fe(II) coordination geometry from octahedron to tetrahedron/square planar. Coordinatively unsaturated Fe(II) results in the highest reductive dechlorination reactivity towards carbon tetrachloride (k1 = 0.26254 min-1). Excessive lactate concentration (> 10 mM) leads to an increased Fe(II) coordination number from four to six with a decreased reductive reactivity. Electrochemical characterization and XPS results show that lactate-Fe(II)-I (C3H5O3-:Fe(II) = 10:20) has the highest electron-donating capacity. This study reveals the abiotic effect of lactate on reductive dechlorination in a subsurface-reducing environment where Fe(II) is usually abundant.

Removing polyfluoroalkyl substances (PFAS) from wastewater with mixed matrix membranes

Polyfluoroalkyl and perfluoroalkyl (PFAS) chemicals are fluorinated and exhibit complicated behavior. They are determined and highly resistant to ecological modifications that render plants ecologically robust. Thermal stability and water and oil resistance are examples of material qualities. Their adverse consequences are causing increasing worry due to their bioaccumulative nature in humans and other creatures. Direct data indicates that PFAS exposure in humans causes endocrine system disruption, immune system suppression, obesity, increased cholesterol, and cancer. Several PFASs are present in drinking water at low doses and may harm people. These cancer-causing PFAS have caused concern for water bodies all around the globe. Analytical techniques are used to identify and measure PFAS in an aqueous medium (membrane). Furthermore, a deeper explanation is provided for PFAS removal methods, including mixed matrix membrane (MMM) technology. By removing over 99 % of the PFAS from wastewater, MMMs may effectively remove PFAS from sewage when the support matrix contains adsorbing components. Furthermore, we consider several factors affecting the removal of PFAS and practical sorption methods for PFAS onto various adsorbents.

Nanotechnologies for environmental remediation and their ecotoxicological impacts

Environmental nanoremediation is an emerging technology that aims to rapidly and efficiently remove contaminants from the polluted sites using engineered nanomaterials (ENMs). Inorganic nanoparticles which are generally metallic, silica-based, carbon-based, or polymeric in nature serve to remediate through chemical reactions, filtration, or adsorption. Their greater surface area per unit mass and high reactivity enable them to treat groundwater, wastewater, oilfields, and toxic industrial contaminants. Despite the growing interest in nanotechnological solutions for bioremediation, the environmental and human hazard associated with their use is raising concerns globally. Nanoremediation techniques when compared to conventional remediation solutions show increased effectivity in terms of cost and time; however, the main challenge is the ability of ENMs to remove contaminants from different environmental mediums by safeguarding the ecosystem. ENMs improving the accretion of the pollutant and increasing their bioavailability should be rectified along with the vigilant management of their transfer to the upper levels of the food chain which subsequently causes biomagnification. The ecosystem-centered approach will help monitor the ecotoxicological impacts of nanoremediation considering the safety, sustainability, and proper disposal of ENMs. The environment and human health risk assessment of each novel engineered nanomaterial along with the regulation of life cycle assessment (LCA) tools of ENMs for nanoremediation can help investigate the possible environmental hazard. This review focuses on the currently available nanotechnological methods used for environmental remediation and their potential toxicological impacts on the ecosystem.

Nanoremediation strategies to address environmental problems

A rapid rise in population, extensive anthropogenic activities including agricultural practices, up-scaled industrialization, massive deforestation, etc. are the leading causes of environmental degradation. Such uncontrolled and unabated practices have affected the quality of environment (water, soil, and air) synergistically by accumulating huge quantities of organic and inorganic pollutants in it. Environmental contamination is posing a threat to the existing life on the Earth, therefore, demands the development of sustainable environmental remediation approaches. The conventional physiochemical remediation approaches are laborious, expensive, and time-consuming. In this regard, nanoremediation has emerged as an innovative, rapid, economical, sustainable, and reliable approach to remediate various environmental pollutants and minimize or attenuate the risks associated with them. Owing to their unique properties such as high surface area to volume ratio, enhanced reactivity, tunable physical parameters, versatility, etc. nanoscale objects have gained attention in environmental clean-up practices. The current review highlights the role of nanoscale objects in the remediation of environmental contaminants to minimize their impact on human, plant, and animal health; and air, water, and soil quality. The aim of the review is to provide information about the applications of nanoscale objects in dye degradation, wastewater management, heavy metal and crude oil remediation, and mitigation of gaseous pollutants including greenhouse gases.

Nanoparticles containing hazardous elements and the spatial optics of the Sentinel-3B OLCI satellite in Amazonian rivers: a potential tool to understand environmental impacts

The Amazon River is the longest river in the world. The Tapajós River is a tributary to the Amazon. At their junction, a marked decrease in water quality is evident from negative impacts from the constant activity of clandestine gold mining in the Tapajós River watershed. The accumulation of hazardous elements (HEs), capable of compromising environmental quality across large regions is evident in the waters of the Tapajós. Sentinel-3B OLCI (Ocean Land Color Instrument) Level-2 satellite imagery with Water Full Resolution (WFR) of 300 m was utilized to detect the highest potential for the absorption coefficient of detritus and gelbstoff in 443 m^-1 (ADG443_NN), chlorophyll-a (CHL_NN) and total suspended matter concentration (TSM_NN), at 25 points in the Amazon and Tapajós rivers (in 2019 and 2021). Physical samples of riverbed sediment collected in the field at the same locations were analyzed for NPs and ultra-fine particles to verify the geospatial findings. The riverbed sediment samples collected in the field were studied by Transmission electron microscopy (TEM) and scanning transmission electron microscopy (STEM), with selected area electron diffraction (SAED), following laboratory analytical procedures. The Sentinel-3B OLCI images, based on the Neural Network (NN) were calibrated by the European Space Agency (ESA), with a standard average normalization of 0.83 µg/mg, containing a maximum error of 6.62% applied to the sampled points. The analysis of the riverbed sediment samples revealed the presence of the following hazardous elements: As, Hg, La, Ce, Th, Pb, Pd, among several others. The Amazon River has significant potential to transport ADG443_NN (55.475 m^-1) and TSM_NN (70.787 gm^-3) in sediments, with the possibility of negatively impacting marine biodiversity, in addition to being harmful to human health over very large regions.

Quantitative study of in situ chemical oxidation remediation with coupled thermal desorption

In situ chemical oxidation (ISCO) is widely used as an efficient remediation technology for groundwater pollution. However, quantitative studies of its reactive remediation process under coupled thermal desorption technology are scarce. Based on laboratory experiments and site remediation, the chemical oxidation remediation reaction process was quantified, and the apparent reaction equation of the ISCO process was constructed. And then, a numerical model coupled with Hydraulic-Thermal-Chemical (HTC) fields was built to quantitatively describe the remediation process of an actual contaminated site. The simulation results fit well with the site monitoring data, and the results indicated that thermal desorption strengthens the ISCO remediation effect. In addition, the HTC model is expanded to build a conceptual and numerical model of a coupled remediation system, including heating and remediation wells. The results showed that high-temperature conditions enhance the activity of remediation chemicals and increase the rate of remediation reaction to obtain a better remediation effect. The heating wells increase the regional temperature, accelerating the diffusion of pollutants and remediation chemicals, and promoting adequate contact and reaction. Based on this crucial mechanism, thermal desorption coupled with ISCO technology can significantly improve remediation efficiency, shorten the remediation cycle, and precisely control agent delivery with the help of numerical simulation to avoid secondary contamination.

Environmental safety of nanotechnologies: The eco-design of manufactured nanomaterials for environmental remediation

Nanosafety is paramount considering the risks associated with manufactured nanomaterials (MNMs) whose implications could outweigh their advantages for environmental applications. Although nanotechnology-based solutions to implement pollution control, remediation and prevention are incremental with clear benefits for public health and Earth' natural ecosystems, nanoremediation is having a setback due to the risks associated with the safety of MNMs for humans and the environment. MNMs are diverse, work differently and bionano-interactions occurring upon environmental exposure will guide their fate and hazardous outcomes. Here we propose a new ecologically-based design strategy (eco-design) having its roots in green nanoscience and LCA that will ground on an Ecological Risk Assessment approach, which introduces the evaluation of MNMs' ecotoxicity along with their performances and efficacies at the design stage. As such, the proposed eco-design strategy will allow recognition and design-out since the very beginning of material synthesis, those hazardous peculiar features that can be hazardous to living beings and the natural environment. A more ecologically sound eco-design strategy in which nanosafety is conceptually included in MNMs design will sustain safer nanotechnologies including those for the environment as remediation by leveraging any risks for humans and natural ecosystems.

Citric acid modified ultrasmall copper peroxide nanozyme for in situ remediation of environmental sulfonylurea herbicide contamination

Herbicide residues in the environment threaten high-quality agriculture and human health. Consequently, in situ remediation of herbicide contamination is vital. We synthesized a novel self-catalyzed nanozyme, ultrasmall (2-3 nm) copper peroxide nanodots modified by citric acid (CP@CA) for this purpose, which can break down into H₂O₂ and Cu²⁺ in water or soil. Ubiquitous glutathione reduces Cu²⁺ into Cu⁺, which promotes the decomposition of H₂O₂ into •OH through a Fenton-like reaction under mild acid conditions created by the presence of citric acid. The generated •OH efficiently degrade nicosulfuron in water and soil, and the maximum degradation efficiency could be achieved at 97.58% in water at 56 min. The possible degradation mechanisms of nicosulfuron were proposed through the 25 intermediates detected. The overall ecotoxicity of the nicosulfuron system was significantly reduced after CP@CA treatment. Furthermore, CP@CA had little impact on active components of soil bacterial community. Moreover, CP@CA nanozyme could effectively remove seven other sulfonylurea herbicides from the water. In this paper, a high-efficiency method for herbicide degradation was proposed, which provides a new reference for the in situ remediation of herbicide pollution.

Bioresponses of earthworm-microbiota symbionts to polychlorinated biphenyls in the presence of nano zero valent iron in soil

Both earthworms and nano zero-valent iron (nZVI) have been recently regarded as important approaches for in-situ remediation of polychlorinated biphenyls (PCBs) in soil. However, the combined action of earthworms and nZVI toward PCBs, and the biological responses of earthworm-microbiota symbionts to nZVI-PCBs co-exposure in soil remediation systems remain unclear. In this study, a 28-d exposure with different levels of polychlorinated biphenyls (PCBs) and nZVI was applied to earthworm Eisenia fetida in an agricultural soil. Both physiological responses of earthworms and their surrounding microbiota in gut and soil were examined. Kinetic modelling parameters showed a doubled PCB accumulation in earthworms with the presence of nZVI. Meanwhile, nZVI-PCBs coexposure synergistically stimulated the activities of superoxide dismutase (SOD) and catalase (CAT), along with the elevated levels of reactive oxygen species (ROS), malondialdehyde (MDA) and glutathione (GSH) in earthworms. Based on integrated metabolomic and 16S rRNA analysis, it was found that earthworms provided certain metabolites, e.g., S-(2-hydroxyethyl)glutathione, 16-hydroxypalmitic acid, and formamide, beneficial to PCB-degrading microbiota (Novosphingobium and Achromobacter) in the intestine. Our findings of nZVI-enhanced PCB bioaccumulation and the defense mechanism afforded by the earthworm-microbiota symbionts toward PCB-nZVI exposure show the promise of combining earthworms with nZVI for the remediation of PCBs-contaminated soil.

Nanoscale Interactions of Humic Acid and Minerals Reveal Mechanisms of Carbon Protection in Soil

The concentrations of terrestrially sourced dissolved organic matter (DOM) have expanded throughout aquatic ecosystems in recent decades. Although sorption to minerals in soils is one major pathway to sequestrate soil organic matter, the mechanisms of organic matter-mineral interactions are not thoroughly understood. Here, we investigated the effect of calcium phosphate mineralization on humic acid (HA) fixation in simulated soil solutions, either with or without clay mineral montmorillonite (Mt). We found that Mt in solution promoted nucleation and crystallization of calcium phosphate (CaP) due to amorphous calcium phosphate clustering and coalescence on Mt surface, which contributed to the long-term persistence and accumulation of HA. Organic ligands with specific chemical groups on HA have higher binding energies to CaP-Mt than to CaP/Mt, according to dynamic force spectroscopy observations. Moreover, CaP-Mt formed in solution showed a great capacity for HA adsorption with a maximum adsorption quantity of 156.89 mg/g. Our findings directly support that Mt is crucial for DOM sequestration by facilitating CaP precipitation/transformation. This has an impact on how effectively we understand the long-term turnover of DOM and highlights knowledge gaps that might assist in resolving essential soil C sequestration issues.

Functionalization of graphene nanostructures with inorganic nanoparticles and their use for the removal of pharmaceutical pollutants in water

Emerging pollutants such as pharmaceuticals are of special concern because despite their low environmental concentration, their biological activity can be intense, and they should be prevented to reach uncontrolledly to the environment. A graphene-based hybrid material decorated with Fe3O4 and TiO2 nanoparticles (NPs) has been prepared to effectively remove emerging pollutants as nonsteroidal anti-inflammatory drugs (NSAIDs) Ibuprofen and Diclofenac present in water at low environmental concentrations by a one-step functionalization process following a novel gentle and scalable surfactant depletion approach. Following this methodology, nanoparticles are progressively deprived of their original surfactant in the presence of graphene, leading to the formation of hybrid nanostructures composed of two different types of nanoparticles well dispersed over the graphene nanosheets. Ibuprofen and Diclofenac adsorption kinetics on the composites was investigated via UV-Vis spectroscopy. The as prepared hybrid material possesses high adsorption capacity, superparamagnetic properties, photocatalytic behavior, and good water dispersibility. Thanks to incorporating TiO2 nanoparticles as in situ catalysts, the adsorption performance of composites is restored after use, which could be a promising recycling pathway for the adsorbents in wastewater treatments.

Constructing Ni4/Fe@Fe3O4-g-C3N4 nanocomposites for highly efficient degradation of carbon tetrachloride from aqueous solution

Catalytic hydrodechlorination is one of the most potential remediation methods for chlorinated organic pollutants. In this study, Ni₄/Fe@Fe₃O₄-g-C₃N₄ (NFFOCN) nanocomposites were synthesized for carbon tetrachloride (CT) removal and characterized by SEM, XPS and FTIR. The characterization results demonstrated that the special functional groups of g-C₃N₄, especially NH groups, effectively alleviated the aggregation of nanoparticles. In addition, the C and N groups of g-C₃N₄ enhanced the catalytic dechlorination of CT by providing binding sites. The experimental results showed that NFFOCN could effectively remove CT over a wide initial pH range of 3-9, and the CT removal efficiency reached 94.7% after 35 min with only 0.15 g/L of NFFOCN at pH 5.5. The Cl^-, SO₄^2-, and HCO₃^- promoted the removal of CT, while HA and NO₃^- had the opposite effect. Furthermore, good sequential CT removal by NFFOCN nanocomposites was observed, and the CT removal efficiency reached 77.3% after four cycles. Based on the identification of products, a possible degradation pathway of CT was proposed. Moreover, the main mechanisms regarding CT removal included the direct reduction of nZVI (about 40.51%), adsorption (around 34.79%), and hydrodechlorination of CT by Ni⁰ using H₂ (about 19.40%).

Freeze-Dried Tuna Pepsin Powder Stabilized by Some Cryoprotectants: In Vitro Simulated Gastric Digestion toward Different Proteins and Its Storage Stability

The impact of maltodextrin (10%) in combination with trehalose or glycerol at different levels (2.5% and 5%) and their mixture on the stability of freeze-dried pepsin from skipjack tuna stomach was studied. Addition of 5% trehalose and 10% maltodextrin yielded the powder (TPP-T5) with highest relative pepsin activity (p < 0.05). TPP-T5 had different shapes and sizes, with mean particle size of 65.42 ± 57.60 μm, poly-dispersity index of 0.474, and zeta potential of −19.95. It had bulk density of 0.53 kg m−3 and possessed fair flowability. The wetting time for TPP-T5 was 16.36 ± 0.73 min, and solubility was 93.58%. TPP-T5 stored at room temperature under different relative humidities could maintain proteolytic activity up to 4 weeks. Commercial porcine pepsin (CP) and crude tuna pepsinogen had molecular weights of 35.2 and 43.3 kDa, respectively, when analyzed using gel filtration (Sephadex G-50) and SDS-PAGE. Tuna pepsin had comparable hydrolysis toward threadfin bream muscle protein, whey protein isolate, and kidney bean protein isolate to commercial pepsin, especially at a higher level (15 units/g protein). Digested proteins contained peptides with varying molecular weights as determined by MALDI-TOF. Therefore, pepsin from skipjack tuna stomach could replace commercial porcine pepsin and was beneficial supplement for patients with maldigestion, particularly the elderly.

pH-Triggered Removal of Nitrogenous Organic Micropollutants from Water by Using Metal-Organic Polyhedra

Water pollution threatens human and environmental health worldwide. Thus, there is a pressing need for new approaches to water purification. Herein, we report a novel supramolecular strategy based on the use of a metal-organic polyhedron (MOP) as a capture agent to remove nitrogenous organic micropollutants from water, even at very low concentrations (ppm), based exclusively on coordination chemistry at the external surface of the MOP. Specifically, we exploit the exohedral coordination positions of RhII -MOP to coordinatively sequester pollutants bearing N-donor atoms in aqueous solution, and then harness their exposed surface carboxyl groups to control their aqueous solubility through acid/base reactions. We validated this approach for removal of benzotriazole, benzothiazole, isoquinoline, and 1-napthylamine from water.

Safer plant-based nanoparticles for combating antibiotic resistance in bacteria: A comprehensive review on its potential applications, recent advances, and future perspective

BACKGROUND

Antibiotic resistance is one of the current threats to human health, forcing the use of drugs that are more noxious, costlier, and with low efficiency. There are several causes behind antibiotic resistance, including over-prescription of antibiotics in both humans and livestock. In this scenario, researchers are shifting to new alternatives to fight back this concerning situation.

SCOPE AND APPROACH

Nanoparticles have emerged as new tools that can be used to combat deadly bacterial infections directly or indirectly to overcome antibiotic resistance. Although nanoparticles are being used in the pharmaceutical industry, there is a constant concern about their toxicity toward human health because of the involvement of well-known toxic chemicals (i.e., sodium/potassium borohydride) making their use very risky for eukaryotic cells.

KEY FINDINGS AND CONCLUSIONS

Multiple nanoparticle-based approaches to counter bacterial infections, providing crucial insight into the design of elements that play critical roles in the creation of antimicrobial nanotherapeutic drugs, are currently underway. In this context, plant-based nanoparticles will be less toxic than many other forms, which constitute promising candidates to avoid widespread damage to the microbiome associated with current practices. This article aims to review the actual knowledge on plant-based nanoparticle products for antibiotic resistance and the possible replacement of antibiotics to treat multidrug-resistant bacterial infections.

Exploration of Zero-Valent Iron Stabilized Calcium–Silicate–Alginate Beads’ Catalytic Activity and Stability for Perchlorate Degradation

Perchlorate contamination in groundwater poses a serious threat to human health, owing to its interference with thyroid function. The high solubility and poor adsorption of perchlorate ions make perchlorate degradation a necessary technology in groundwater contaminant removal. Here, we demonstrate the perchlorate degradation by employing nano zero-valent iron (nZVI) embedded in biocompatible silica alginate hybrid beads fabricated using calcium chloride (1 wt%) as a crosslinker. The concentration of precursors (sodium alginate, sodium silicate) for bead formation was standardized by evaluating the thermal stability of beads prepared at different sodium silicate and alginate concentrations. Thermal degradation of silica alginate hybrid samples showed a stepwise weight loss during the thermal sweep, indicating different types of reactions that occur during the degradation process. The formation of the silica alginate hybrid structure was confirmed by FT-IR spectroscopy. Scanning electron microscopy (SEM) data revealed the surface morphology of silica alginate hybrid changes by varying sodium silicate and alginate concentrations. nZVI-loaded alginate–silicate polymer bead (nZVI-ASB) exhibited excellent perchlorate degradation efficiency by degrading 20 ppm of perchlorate within 4 h. Our study also showed the perchlorate degradation efficiency of nZVI-ASB is maximum at neutral pH conditions.

Combining electrokinetic treatment with modified zero-valent iron nanoparticles for rapid and thorough dechlorination of trichloroethene

In situ injection of nanoscale zero-valent iron (nZVI) slurry is a promising method to treat chlorinated solvents represented by trichloroethylene (TCE) in groundwater. In this study, the effects of sulfidation and emulsification treatment on the performance of nZVI reductive dechlorination of TCE under enhancement by an external electric field were evaluated. The hydrophobic oil film on the surface of sulfidized and emulsified zero-valent iron (S-EZVI) can sequestrate more than one-fifth of the unreacted TCE in the early stage of the experiment (at 5 min). The FeS layer formed on the surface of S-EZVI can facilitate the electron-transfer process and reduce the degree of corrosion of Fe⁰ with water by 94.0%. Electric-field-enhanced S-EZVI technology can remove more than 93.1% of TCE in the pH range 6.0-9.0, and the performances in overly acid and overly alkali environments both improved. Under the optimal conditions, the TCE removal rate and reaction constant of the applied electric field group reached 96.7% and 1.6 × 10^-2 L g^-1 min^-1, respectively, which were much higher than those of the group without an electric field (53.2% and 3.3 × 10^-3 L g^-1 min^-1) owing to rapid concurrent hydrogenolysis of dichloroethenes and vinyl chloride, or another transformation pathway, such as direct oxidation by the anode. Thereby, this method avoids accumulation of chlorinated intermediates, especially toxic vinyl chloride. This work shows that combination technology has many characteristics that are favorable for field application, and it is expected to provide a new reference and have application value for development of in situ efficient and thorough treatment of TCE-contaminated groundwater.