Photodegradation of microplastics mediated by different types of soil: The effect of soil components

Microplastic aging and adsorption in the atmosphere, and their associated impacts on various spheres of the earth: A review

Microplastic (MPs, size <5 mm) is an emerging category of contaminants with detrimental effects on human health, climate, and ecology. The atmospheric pathway is a crucial transport route for the migration of MPs from source to receptor locations. This long-range transport leads to the ubiquitous presence of MPs across all environmental matrices and constrains the source-transport pathway-sink interaction. During atmospheric transport, MPs experience aging and adsorption as a result of interactions with winds, solar radiation, moisture, pH, and atmospheric pollutants, which alters their hydrophilicity, structure, surface area, size, color, and the capacity for adsorption, often resulting in elevated toxicity and associated risks. However, the multifaceted dynamics of atmospheric aging of MPs and consequent impacts are poorly understood. This review presents a critical assessment of three major factors that determine the nature and degree of MP aging and adsorption in the atmosphere, namely: intrinsic MP properties such as the degree of unsaturation, crystallinity, presence of functional groups, charge, specific surface area, and structural defects; environmental factors such as temperature, pH, moisture, and the presence of chemical species; and pollutant characteristics such as charge and hydrophilicity/hydrophobicity that influence adsorption, with an emphasis on potential mechanisms. Additionally, the review presents a comparative assessment of the critical factors and mechanisms responsible for aging and adsorption in atmosphere with those in other environmental media. Further, the potential impacts of atmospherically aged MPs on climate, the biosphere, cryosphere, pedosphere, and hydrosphere are summarized. The review finally identifies key knowledge gaps and outlines perspectives for future research.

Microplastics in agricultural soils following sewage sludge applications: Evidence from a 25-year study

Sewage sludges applied to agricultural soils are sources of microplastic pollution, however, little is known about the accumulation, persistence, or degradation of these microplastics over time. This is the first study to provide long-term, high temporal resolution quantitative evidence of microplastics in agricultural soils following sewage sludge application. The abundance and degradation of microplastics was assessed in soils sampled biennially from an experimental field over a 25-year period managed under an improved grassland regime following the application of five different sewage sludges. The sludges contained different microplastic compositions reflecting the different sources of the sludges. Microplastic abundance increased by 723-1445% following sewage sludge applications (p < 0.05) and remained constant over time (22 years and possibly beyond) (p > 0.05). All sludges predominantly added white/transparent microfibres to soil. Microfilms, microfibres, and fragments were most susceptible to degradation, potentially creating micro(nano)plastics. Of note was the discoloration of coloured microfibres, which may be environmentally hazardous due to the toxicity of textile dyes in soil ecosystems. We also found that plastic composition could be used to trace its source. This evidence is useful in informing regulation on sewage sludge use and management, and in assessing the fate and impact of microplastics in soil.

Polyethylene fragments in Argentinean horticultural soils: Environmental transformation to a composite material

Polyethylene macro, meso, and microplastics collected from horticultural soils in Moreno, Buenos Aires, Argentina, were studied to understand their physicochemical transformations after environmental exposure. These plastics contained mechanically stable compounds of Si (1.2-4.0 %), Al (0.91-1.5 %), and Fe (0.64-2.2 %), likely due to soil clay particles adhering to the plastic. The plastics' surfaces were oxidized, with high carbonyl (0.05-0.23) and hydroxyl (1.6-2.7) indices. Weathering led to thinner, rougher surfaces with increased contact angles due to the presence of clay and polar organic groups. Scanning electron microscopy (SEM) showed cracks and particles on the surfaces, while atomic force microscopy (AFM) revealed roughness increased from 0.44 nm in pristine polyethylene (p-PE) to 1.60 nm in weathered samples. Heavy metal sorption experiments showed that the weathered plastics absorbed significantly more Ni2+ and Pb2+ than unweathered PE (4.5 times for Ni2+ and 11 times for Pb2+). After removing clay with hydrofluoric acid, the plastics still retained the same amount of these metals, suggesting that the sorption occurred mainly on the modified plastic surface rather than the clay. Arsenate tests indicated that the plastics selectively absorbed cationic metals. This study also developed a simple ATR-FTIR method for quantifying silicate on polyethylene surfaces, contributing to an understanding of soil-derived particle interactions with plastic in agricultural settings.

Insights into photoaging behaviors and mechanisms of biodegradable and conventional microplastics in soil

Understanding the photoaging dynamics of biodegradable and conventional microplastics (MPs) is crucial due to their widespread environmental risks. However, studies on the photoaging behaviors of different MPs in soil ecosystems are limited. This study focused on two representative MPs, conventional polyethylene (PE) and biodegradable poly(butylene adipate-co-terephthalate) (PBAT), examining their photoaging processes in soil. The photoaging performance of these MPs was characterized using indicators like carbonyl index (CI), oxygen-carbon ratio (O/C), weight loss (WL), and water contact angle (CA). The entropy weight method (EWM) was employed to calculate a comprehensive aging index (CAI), quantitatively measuring overall photoaging. The results revealed that PBAT underwent significantly greater photoaging than PE, with the CAI of aged PBAT (0.88) being over 15 times higher than that of aged PE (0.06). Environmental persistent free radicals (EPFRs) were identified as key factors in MPs' photoaging. LC-MS/MS analysis revealed oxygen-containing byproducts and plastic additives, suggesting photodegradation pathways involving chain scission and oxidation. Density functional theory (DFT) highlighted differences in energy gaps and susceptibility to free radical attacks between PE and PBAT. This study not only compares photoaging behaviors but also introduces a novel method for evaluating MPs' aging, providing a basis for assessing ecological risks in soil.

Coupling of radon and microbial analysis for dense non-aqueous-phase liquid tracing and health risk assessment in groundwater under seasonal variations

Dense non-aqueous-phase liquids (DNAPLs) represent one of the most hazardous contaminants of groundwater, posing health risks to humans. Radon is generally used to trace DNAPLs; however, external factors, such as rainfall or stream water, can influence its efficacy. To overcome these limitations, this study pioneered the integration of radon and microbial community structures to explore DNAPL tracing and natural attenuation in the context of seasonal variations for human health risk assessments. The results showed that a radon tracer can estimate DNAPL saturation in the source zone, especially during the dry season when radon deficiency predominates. However, samples exhibited mixing effects during the wet season because of local precipitation. Moreover, bioremediation and low health risks were observed in the plume boundary zone, indicating that microbial dechlorination was a predominant factor determining these risks. The abnormal patterns of radon observed during the wet season can be elucidated by examining microbiological communities. Consequently, a combined approach employing radon and microbial analysis is advocated for the boundary zone, albeit with a less intensive management strategy, compared with that for the source zone. This novel coupling method offers a theoretical and practical foundation for managing DNAPL-contaminated groundwater.

Microplastics alter cadmium accumulation in different soil-plant systems: Revealing the crucial roles of soil bacteria and metabolism

Cadmium (Cd) and microplastics (MPs) gradually increased to be prevalent contaminants in soil, it is important to understand their combined effects on different soil-plant systems. We studied how different doses of polylactic acid (PLA) and polyethylene (PE) affected Cd accumulation, pakchoi growth, soil chemical and microbial properties, and metabolomics in two soil types. We found that high-dose MPs decreased Cd accumulation in plants in red soil, while all MPs decreased Cd bioaccumulation in fluvo-aquic soil. This difference was primarily attributed to the increase in dissolved organic carbon (DOC) and pH in red soil by high-dose MPs, which inhibited Cd uptake by plant roots. In contrast, MPs reduced soil nitrate nitrogen and available phosphorus, and weakened Cd mobilization in fluvo-aquic soil. In addition, high-dose PLA proved detrimental to plant health, manifesting in shortened shoot and root lengths. Co-exposure of Cd and MPs induced the shifts in bacterial populations and metabolites, with specific taxa and metabolites closely linked to Cd accumulation. Overall, co-exposure of Cd and MPs regulated plant growth and Cd accumulation by driving changes in soil bacterial community and metabolic pathways caused by soil chemical properties. Our findings could provide insights into the Cd migration in different soil-plant systems under MPs exposure. ENVIRONMENTAL IMPLICATION: Microplastics (MPs) and cadmium (Cd) are common pollutants in farmland soil. Co-exposure of MPs and Cd can alter Cd accumulation in plants, and pose a potential threat to human health through the food chain. Here, we investigated the effects of different types and doses of MPs on Cd accumulation, plant growth, soil microorganisms, and metabolic pathways in different soil-plant systems. Our results can contribute to our understanding of the migration and transport of Cd by MPs in different soil-plant systems and provide a reference for the control of combined pollution in the future research.

Biochar immobilized hydrolase degrades PET microplastics and alleviates the disturbance of soil microbial function via modulating nitrogen and phosphorus cycles

Microplastics (MPs) pose an emerging threat to soil ecological function, yet effective solutions remain limited. This study introduces a novel approach using magnetic biochar immobilized PET hydrolase (MB-LCC-FDS) to degrade soil polyethylene terephthalate microplastics (PET-MPs). MB-LCC-FDS exhibited a 1.68-fold increase in relative activity in aquatic solutions and maintained 58.5 % residual activity after five consecutive cycles. Soil microcosm experiment amended with MB-LCC-FDS observed a 29.6 % weight loss of PET-MPs, converting PET into mono(2-hydroxyethyl) terephthalate (MHET). The generated MHET can subsequently be metabolized by soil microbiota to release terephthalic acid. The introduction of MB-LCC-FDS shifted the functional composition of soil microbiota, increasing the relative abundances of Microbacteriaceae and Skermanella while reducing Arthobacter and Vicinamibacteraceae. Metagenomic analysis revealed that MB-LCC-FDS enhanced nitrogen fixation, P-uptake and transport, and organic-P mineralization in PET-MPs contaminated soil, while weakening the denitrification and nitrification. Structural equation model indicated that changes in soil total carbon and Simpson index, induced by MB-LCC-FDS, were the driving factors for soil carbon and nitrogen transformation. Overall, this study highlights the synergistic role of magnetic biochar-immobilized PET hydrolase and soil microbiota in degrading soil PET-MPs, and enhances our understanding of the microbiome and functional gene responses to PET-MPs and MB-LCC-FDS in soil systems.

Centennial Records of Microplastics in Lake Cores in Huguangyan Maar Lake, China

Microplastic records from lake cores can reconstruct the plastic pollution history. However, the associations between anthropogenic activities and microplastic accumulation are not well understood. Huguangyan Maar Lake (HML) is a deep-enclosed lake without inlets and outlets, where the sedimentary environment is ideal for preserving a stable and historical microplastic record. Microplastic (size: 10-500 μm) characteristics in the HML core were identified using the Laser Direct Infrared Imaging system. The earliest detectable microplastics appeared unit in 1955 (1.1 items g-1). The microplastic abundance ranged from n.d. to 615.2 items g-1 in 1955-2019 with an average of 134.9 items g-1. The abundance declined slightly during the 1970s and then increased rapidly after China's Reform and Opening Up in 1978. Sixteen polymer types were detectable, with polyethylene and polypropylene dominating, accounting for 23.5 and 23.3% of the total abundance, and the size at 10-100 μm accounted for 80%. Socioeconomic factors dominated the microplastic accumulation based on the random forest modeling, and the contributions of GDP per capita, plastic-related industry yield, and total crop yield were, respectively, 13.9, 35.1, and 9.3% between 1955-2019. The total crop yield contribution further increased by 1.7% after 1978. Coarse sediment particles increased with soil erosion exacerbated microplastics discharging into the sediment.

Global analysis of the adverse effects of micro- and nanoplastics on intestinal health and microbiota of fish

The wide occurrence of micro- and nanoplastics (MPs/NPs) within aquatic ecosystems has raised increasing concerns regarding their potential effects on aquatic organisms. However, the effects of MPs/NPs on intestinal health and microbiota of fish remain controversial, and there is a lack of comprehensive understanding regarding how the impact of MPs/NPs is influenced by MPs/NPs characteristics and experimental designs. Here, we conducted a global analysis to synthesize the effects of MPs/NPs on 47 variables associated with fish intestinal health and microbiota from 118 studies. We found that MPs/NPs generally exerted obvious adverse effects on intestinal histological structure, permeability, digestive function, immune and oxidative-antioxidative systems. By contrast, MPs/NPs showed slight effects on intestinal microbial variables. Further, we observed that the responses of intestinal variables to MPs/NPs were significantly regulated by MPs/NPs characteristics and experimental designs. For instance, polyvinyl chloride plastics showed higher toxicity to fish gut than polyethylene and polystyrene did. Additionally, larval fish appeared to be more sensitive to MPs/NPs than juvenile fish. Collectively, this study highlights the potential impacts of MPs/NPs on intestinal health and microbiota of fish, and underscores the determinant role of MPs/NPs characteristics and experimental designs in MPs/NPs toxicity.

Health assessment based on exposure to microplastics in tropical agricultural soil

Microplastic (MP) pollution of agricultural soils has caused global alarm over its widespread distribution and potential risks to terrestrial ecosystems and human health. This study assessed human health based on exposure to soil MPs through a comprehensive investigation of the factors influencing their occurrence and spatial distribution on Hainan Island, South China. The results showed that the abundance of soil MPs was 1128.6 ± 391.5 items·kg-1, whereas the normalized abundance of MPs based on using a power-law function was 19,261.4 items·kg-1. Regarding the extent of population exposure to agricultural soil MPs, the average daily exposure dose (pADD) model revealed that using mass as an indicator to assess the health risks associated with MP intake is more reliable than using abundance. However, abundance-based exposure assessments are also relevant because MPs with smaller particle sizes are more harmful to human health. Moreover, for adults, the normalized pADD values based on abundance and mass were 1.68E-02 item MPs·kg BW-1·d-1 and 7.23E-02 mg MPs·kg BW-1·d-1, respectively. Although the multidimensionality of MPs should be further aligned and quantified, the preliminary findings of this study contribute to the development of human health risk assessment frameworks for soil MPs.

Do contaminants compromise the use of recycled nutrients in organic agriculture? A review and synthesis of current knowledge on contaminant concentrations, fate in the environment and risk assessment

Use of nutrients recycled from societal waste streams in agriculture is part of the circular economy, and in line with organic farming principles. Nevertheless, diverse contaminants in waste streams create doubts among organic farmers about potential risks for soil health. Here, we gather the current knowledge on contaminant levels in waste streams and recycled nutrient sources, and discuss associated risks. For potentially toxic elements (PTEs), the input of zinc (Zn) and copper (Cu) from mineral feed supplements remains of concern, while concentrations of PTEs in many waste streams have decreased substantially in Europe. The same applies to organic contaminants, although new chemical groups such as flame retardants are of emerging concern and globally contamination levels differ strongly. Compared to inorganic fertilizers, application of organic fertilizers derived from human or animal feces is associated with an increased risk for environmental dissemination of antibiotic resistance. The risk depends on the quality of the organic fertilizers, which varies between geographical regions, but farmland application of sewage sludge appears to be a safe practice as shown by some studies (e.g. from Sweden). Microplastic concentrations in agricultural soils show a wide spread and our understanding of its toxicity is limited, hampering a sound risk assessment. Methods for assessing public health risks for organic contaminants must include emerging contaminants and potential interactions of multiple compounds. Evidence from long-term field experiments suggests that soils may be more resilient and capable to degrade or stabilize pollutants than often assumed. In view of the need to source nutrients for expanding areas under organic farming, we discuss inputs originating from conventional farms vs. non-agricultural (i.e. societal) inputs. Closing nutrient cycles between agriculture and society is feasible in many cases, without being compromised by contaminants, and should be enhanced, aided by improved source control, waste treatment and sound risk assessments.

The reciprocity principle in mulch film deterioration and microplastic generation

Plastic film mulching stands as a globally employed agricultural technology pivotal to agricultural progress. Nevertheless, the environmental degradation of plastic mulch films underscores their role as a major source of secondary plastic pollutants, particularly microplastics. While a growing body of research has drawn attention to the rising issue of microplastic pollution and its environmental implications stemming from the use of plastic mulch films, there remains a significant knowledge gap regarding the kinetics and rate-limiting mechanisms governing the generation of microplastics during processes driven by plastic photodegradation. Moreover, a comprehensive quantification of the connection between mulch deterioration and the behavior of microplastic release and accumulation has yet to be fully realized. In this study, a kinetic equation was formulated to characterize the degradation of plastic mulch films and the subsequent release and accumulation of microplastics under light exposure. The results demonstrate that with increasing irradiation time, the change in the release rate exhibits a bell-shaped Gaussian probability distribution, while the cumulative alteration of microplastics follows a Gaussian distribution. Remarkably, once the exposure time reaches μ + 3σ, the accumulation plateaus at 99.7%. This research establishes a theoretical framework for the prospective assessment of plastic mulch lifespan and its environmental repercussions. Moreover, the findings provide valuable insights for optimizing plastic mulch design and devising strategies to mitigate microplastic pollution.

Environmental fate, aging, toxicity and potential remediation strategies of microplastics in soil environment: Current progress and future perspectives

Microplastics (MPs) are small plastic debris (<5 mm) that result from the fragmentation of plastic due to physical and physiochemical processes. MPs are emerging pollutants that pose a significant threat to the environment and human health, primarily due to their pervasive presence and potential bioaccumulation within the food web. Despite their importance, there is a lack of comprehensive studies on the fate, toxicity, and aging behavior of MPs. Therefore, this review aims to address this gap by providing a cohesive understanding of several key aspects. Firstly, it summarizes the sources and fate of MPs, highlighting their ubiquitous presence and the potential pathways through which they enter ecosystems. Secondly, it evaluates the aging process of MPs and the factors influencing it, including the morphological and physiological changes observed in crops and the release of pollutants from aged MPs, which can have detrimental effects on the environment and human health. Furthermore, the impacts of aging MPs on various processes are discussed, such as the mobilization of other pollutants in the environment. The influence of aged MPs on the soil environment, particularly their effect on heavy metal adsorption, is examined. Finally, the review explores strategies for the prevention technologies and remediation of MPs, highlighting the importance of developing effective approaches to tackle this issue. Overall, this review aims to contribute to our understanding of MPs, their aging process, and their impacts on the environment and human health. It underscores the urgency of addressing the issue of MPs and promoting research and remediation efforts to mitigate their adverse effects.

Microplastics in soils during the COVID-19 pandemic: Sources, migration and transformations, and remediation technologies

The COVID-19 pandemic has led to a notable upsurge of 5-10 % in global plastic production, which could have potential implications on the soil quality through increased microplastics (MPs) content. The elevated levels of MPs in the soil poses a significant threat to both the environment and human health, hence necessitating the remediation of MPs in the environment. Despite the significant attention given to MPs remediation in aqueous environments, less consideration has been given to MPs remediation in the soil. Consequently, this review highlights the major sources of MPs in the soil, their migration and transformation behaviors during the COVID-19 pandemic, and emphasizes the importance of utilizing remediation technologies such as phytoremediation, thermal treatment, microbial degradation, and photodegradation for MPs in the soil. Furthermore, this review provides a prospective outlook on potential future remediation methods for MPs in the soil. Although the COVID-19 pandemic is nearing its end, the long-term impact of MPs on the soil remains, making this review a valuable reference for the remediation of MPs in the post-pandemic soil.

Effects of environmental and anthropogenic factors on the distribution and abundance of microplastics in freshwater ecosystems

Although microplastics are emerging marine pollutants that have recently attracted increasing attention, it is still difficult to identify their sources. This study reviewed 6487 articles to determine current research trends and found 237 effective concentration points after sorting, which were distributed in four regions and related to freshwater ecosystems. Results found that 15 environmental variables represented natural and anthropogenic environmental characteristics, of which seven environmental variables were selected for experimental modelling. Random forest models fitted sample data, thus facilitating the identification of regional microplastics distribution. The global random forest model had random forest importance scores (RFISs) for gross domestic product, population, and the proportion of agricultural land use were 15.76 %, 15.64 %, and 14.74 %, respectively; these indicate that human activities significantly affected the global distribution of microplastics. In Asia, agriculture and urban activities are the main sources of microplastics, with an RFIS of 11.58 % and 12.24 % for the proportion of agricultural and urban land use, respectively. Activities in urban areas were determined to be the main influencing factors in North America, with an RFIS of 13.92 % for the proportion of urban land use. Agricultural activities were the main influencing factors in Europe, with RFISs for the proportion of agricultural land use of 16.90 %. Our results indicate that region-specific policies are required to control microplastics in different regions, with soil composition being a latency factor that affects microplastics' distribution.

Current status of microplastics and nanoplastics removal methods: Summary, comparison and prospect

In modern society, plastics also play an indispensable role in people's lives due to their various excellent properties. However, when these plastic products are discarded after being used, after being subjected to external influences, they will continue to be worn, damaged and degraded into micro- and nano-scale plastics, which are microplastics and nanoplastics (M/NPs). Although people's attention has been paid to M/NPs at present, the focus is still mainly on the detection and hazard of M/NPs, and how to remove M/NPs is relatively less popular. This review was written in order to draw the attention of more researchers to remove M/NPs. This review first briefly introduces the research background of M/NPs, and also shows the main analytical methods currently used for qualitative and quantitative M/NPs. Then, most of the current literature on the removal of M/NPs was collected, and they were classified, summarized, and introduced according to the classification of physical, physicochemical, and biological methods. The advantages and disadvantages of various methods are summarized, and they are also compared, which can help more researchers choose the appropriate method for research. In addition, the application scenarios of these methods are briefly introduced. Finally, some future research directions are proposed for the current research status of M/NPs removal. It is hoped that this will further promote the development on the method of removing M/NPs.

Typical microplastics in field and facility agriculture dynamically affect available cadmium in different soil types through physicochemical dynamics of carbon, iron and microbes

Combined pollution from microplastics (MPs) and other environmental pollutants has attracted considerable attention. Few studies have investigated the effects of polyurethane (PU) and polypropylene (PP) MPs on available Cadmium(Cd) in different soil types. Here, PU and PP additions affected available Cd and reduced its concentration in soil (P > 0.05). PU and PP reduced available Cd more strongly in clay soil than that in sandy soil. PU and PP improved the soil porous structure and voids and significantly increased the Zeta potential in clay soil (P < 0.05). Dissolved organic carbon and pH in clay soil were significantly negatively correlated with available Cd after PU and PP addition, and Fe(Ⅱ) was significantly negatively correlated with available Cd in sandy soil. PU and PP addition promoted the C-C, CO₃^2-, and C-H functional groups and FeO, FeOOH, and Fe₃O₄ formation and influenced the effective Cd through adsorption and precipitation. CdCO₃ formation and clay mineral adsorption, and iron oxide formation, influenced the effective Cd in clay and sandy soils, respectively. PU and PP influenced the effective state of Cd by affecting bacterial communities related to carbon and iron cycles. This study is significant for assessing the environmental risks of MPs combined with heavy metals in different soils and their mechanisms.

Studying the combined influence of microplastics' intrinsic and extrinsic characteristics on their weathering behavior and heavy metal transport in storm runoff

The weathering and contaminant transport behavior of both primary (PMPs) and secondary microplastics (SMPs) are interrelated to their original physiochemical features and variations within the environment. This study examines the influence of PMPs' intrinsic characteristics (polymer structure and crystallinity) and SMPs' extrinsic features (surface oxidation and external sediments attachment) on the photodegradation kinetics, and subsequently Pb(II) and Zn(II) uptake from stormwater. For this purpose, high density polyethylene (HDPE) and low density polyethylene (LDPE) with different degrees of crystallinities were produced as PMPs, and their photodegradation behaviors were compared with original polymers. Furthermore, the SMPs generated by abrasion and surface oxidation of PMPs and the virgin PMPs underwent accelerated photodegradation, and the changes of their crystallinity, surface chemistry, and morphology were examined. Scanning electron microscopy (SEM) imaging and X-ray photoelectron (XPS) studies revealed the formation of cracks and different oxidized functionalities on MPs surface due to UV photodegradation. The vinyl and carbonyl indices calculated using Attenuated Total Reflectance Fourier Transform Infrared (ATR-FTIR) spectroscopy demonstrated an elevated photodegradation rate for SMPs compared to the PMPs. Moreover, the Differential Scanning Colorimetry (DSC) demonstrated an increasing percentage of crystallinity in all MPs due to the photodegradation. The percent crystallinity of HDPE pellets increased after photodegradation from 49.8 to 62.6 and it increased from 17.2 to 38.9 for LDPE pellets respectively. The greater level of increase in crystallinity for LDPE in comparison to HDPE upon photodegradation was referred to as LDPE's greater amorphous content and branched structure. A greater level of metal uptake was obtained for photodegraded LDPE pellets as 2526 μg/m² for Pb(II) and 2028 μg/m² for Zn(II) respectively.

Photon-induced redox chemistry on pyrite promotes photoaging of polystyrene microplastics

The mineral particles in sediment could affect polystyrene microplastics (PS-MPs) prosperity through physical and chemical interactions. Pyrite with semiconducting properties is the most abundant metal sulfide mineral in the sediments of lake and river mouths. The widespread sunlight and the coexistence of PS-MPs and pyrite in lake or river water due to frequently water fluctuation is a typical photoaging environment for PS-MPs. The oxidation of reactive oxygen species (ROS) generated from pyrite would degrade the PS-MPs in theory. However, researches about photoaging of PS-MPs mediated by pyrite are paucity. Here, we investigated the photoaging process of PS-MPs affected by pyrite under simulated light condition. Remarkably, surface morphology of PS-MPs mediated by pyrite was broken. And the oxygen-containing functional group of PS-MPs increased, as revealed by Fourier Transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS) and contact angle test. 2D-COS analysis showed photoaging of PS-MPs with pyrite happened in the following order: C-H > C=C > C=O > C-O > OH. The photoaging of PS-MPs and transformation of intermediate were accelerated by ROS (O₂·^-, ·OH and ¹O₂) generated from pyrite. The free ·OH may play a major role in the promotion. Because the interfacial ROS reactions on pyrite surface were limited due to the electrostatic repulsion between pyrite and PS-MPs. The study explored photoaging behavior of PS-MPs accelerated by pyrite, which could be helpful for understanding photon-induced redox chemistry on PS-MPs via widespread sulfide metal minerals on earth's surface and providing further information to assess potential risks of PS-MPs.

Occurrence status of microplastics in main agricultural areas of Xinjiang Uygur Autonomous Region, China

A large number of plastic products are used in the process of agricultural production, and the recycling efficiency is low, which leads to the production of a large number of microplastics. Therefore, the microplastic contamination in agricultural areas requires being investigated urgently. In addition, the occurrence characteristics of microplastics are also different in agricultural areas with various land use modes. In this study, the main agricultural areas in Xinjiang are taken as the research object. The abundance of microplastics in the main agricultural areas in Xinjiang ranges from 288 to 1452 items/kg. The shape of microplastics is mainly bulks, and white microplastics account for the highest proportion, and the majority of their sizes are less than 0.5 mm. The risk assessment results show that the contamination risk index of microplastics in this area is 108.92 and the risk level is grade III. The research shows that there is little difference in the abundance of microplastics between paddy field and garden land, which may be because there are few sources of microplastics in the land of these two utilization modes, and the potential pollution sources are similar, such as the atmospheric deposition of microplastics, the falling of fibers on people's clothes during farming, and the agricultural use of sludge. This study can provide a reference for further study on the existing circumstances of microplastics in agricultural areas.

The polymers and their additives in particulate plastics: What makes them hazardous to the fauna?

Due to the increasing concerns on global ecosystems and human health, the environmental risks posed by microplastics (MPs) and nanoplastics (NPs) have become an important topic of research. Their ecological impacts on various faunal species have been extensively researched and reviewed. However, the majority of those studies perceive these micro(nano)-plastics (MNPs) as a single entity rather than a collective term for a group of chemically distinct polymeric particulates. Each of the plastic polymers can possess unique physical and chemical behavior, which, in turn, can determine the possible environmental impacts. Furthermore, many studies explore the adsorption, absorption, and release of other environmental pollutants by MNPs. But only a handful of them explore the leaching of additives possessed by these polymers. Data on the environmental behavior and toxicity of individual additives associated with different polymer particulates are scarce. Knowledge about the leachability and ecotoxicity of the additives associated with environmental MNPs (unlike large plastic particles) remains limited. The ecological impacts of different MNPs together with their additives and the basis of their toxicity have not been explored yet. The present review systematically explores the potential implications of environmentally predominant polymers and their associated additives and discusses their physicochemical characteristics. The review ultimately aims to provide novel insights on what components precisely make MNPs hazardous to the fauna. The paper also discusses the major challenges proposed in the available literature along with recommendations for future research to throw light on possible solutions to overcome the hazards of MNPs.