Occurrence and characteristics of atmospheric microplastics in Mexico City

Air pollution and its impacts on health: Focus on microplastics and nanoplastics

Air pollution represents a significant public health concern, contributing to approximately 6.7 million premature deaths annually. Among the various pollutants, particulate matter (PM)2.5, emitted from fossil fuel combustion, poses a significant health risk. It induces oxidative stress and increases respiratory and cardiovascular disease risk. Recently, particulate plastics, classified as microplastics (MPs) (less than 5 mm) or nanoplastics (NPs) (less than 1 μm), have been identified as environmental contaminants. It has been demonstrated that plastic particles, including MPs and NPs, can gain access to the human body via inhalation, ingestion, and dermal contact, resulting in various adverse health effects, such as inflammation and oxidative stress. Particulate plastics have been identified in human biological samples, including blood, saphenous vein tissues and lung tissues. Moreover, their presence in PM2.5, particularly in urban settings, exacerbates the health risks associated with air pollution. This review addresses the sources, detection, health effects, and mitigation strategies for particulate plastics in the atmosphere. Additionally, the study discusses the biological degradation of particulate plastics by microorganisms and the potential of advanced oxidation processes for their removal. These comprehensive approaches could reduce the environment and human health from the adverse effects of airborne particulate plastics.

Assessment of suspended atmospheric microplastics in Tianjin Binhai New Area: characterization, human health risks, and correlation with weather conditions and Air Quality Index

Suspended atmospheric microplastics (SAMPs), as a critical component of environmental microplastic pollution, have garnered substantial scientific interest. The characterization of SAMPs in urban environments, as well as the potential risks on health, continues to be a topic of significant research interest. This study provides a comprehensive report on the presence of SAMPs in the Binhai New Area of Tianjin, China, based on samples collected during the autumn and winter of 2023-2024 using a medium-flow total suspended particulate (TSP) sampler at a monitoring station. Microplastics were detected in all samples, with concentrations ranging from 0.2 to 1.8 items/m3 in autumn and from 0.1 to 1.1 items/m3 in winter, and a total mean of 0.6 ± 0.4 items/m3. Particle sizes spanned 12.28-3248.58 µm, with fibrous shapes dominating the morphological composition. Observed colors included black, blue, yellow, transparent, red, and green, with black microplastics being the most prevalent. These SAMPs were composed of polyethylene terephthalate, polyethylene, rayon, polypropylene, and ethylene-ethyl acrylate copolymer. A risk assessment indicated that residents of Binhai New Area, Tianjin City, face a measurable health risk from microplastic exposure. Significant correlations were identified between SAMPs and dew point temperature as well as relative humidity in the autumn. In the winter, significant correlations were observed between the abundance of SAMPs and ground barometric pressure and wind velocity. Weak negative correlations were observed between SAMP abundances and the Air Quality Index (AQI) in both seasons Future research will utilize more advanced technologies and establish a global monitoring network to further explore the sources, distribution, and impacts of atmospheric microplastics.

Plastic Smell: A Review of the Hidden Threat of Airborne Micro and Nanoplastics to Human Health and the Environment

Airborne micro and nanoplastics (MPs/NPs) are a growing issue due to their possible health hazards. Since the current bibliography lacks a thorough evaluation, this review examines the sources, environmental dynamics, and health impacts of airborne MPs/NPs. Through atmospheric transport processes, these neo-pollutants spread around the world after being released, potentially settling in urban and remote areas. This review is the first to compare active and passive aerosol sampling methods, and microscopy, thermochemical, and spectroscopy analytical techniques, with a focus on their limitations in precisely quantifying micro-nanoscale plastic particles. It also draws attention to the potential toxicological effects of inhaled MPs/NPs, which can lead to oxidative stress, respiratory inflammation, and other negative health consequences. This review concludes by examining how airborne MPs/NPs may worsen their ecological impact by serving as carriers of hazardous chemicals and microbial pollutants. Despite growing awareness, there still are many unanswered questions, especially about the impact of long-term exposure and how atmospheric conditions affect the spread of MPs/NPs. The aim of this review was to bring attention to the issue of airborne MP/NP effects and to promote the development of advanced monitoring systems, a new multidisciplinary scientific field for the study of these novel pollutants, and global regulatory frameworks.

Microplastic aging and adsorption in the atmosphere, and their associated impacts on various spheres of the earth: A review

Microplastic (MPs, size <5 mm) is an emerging category of contaminants with detrimental effects on human health, climate, and ecology. The atmospheric pathway is a crucial transport route for the migration of MPs from source to receptor locations. This long-range transport leads to the ubiquitous presence of MPs across all environmental matrices and constrains the source-transport pathway-sink interaction. During atmospheric transport, MPs experience aging and adsorption as a result of interactions with winds, solar radiation, moisture, pH, and atmospheric pollutants, which alters their hydrophilicity, structure, surface area, size, color, and the capacity for adsorption, often resulting in elevated toxicity and associated risks. However, the multifaceted dynamics of atmospheric aging of MPs and consequent impacts are poorly understood. This review presents a critical assessment of three major factors that determine the nature and degree of MP aging and adsorption in the atmosphere, namely: intrinsic MP properties such as the degree of unsaturation, crystallinity, presence of functional groups, charge, specific surface area, and structural defects; environmental factors such as temperature, pH, moisture, and the presence of chemical species; and pollutant characteristics such as charge and hydrophilicity/hydrophobicity that influence adsorption, with an emphasis on potential mechanisms. Additionally, the review presents a comparative assessment of the critical factors and mechanisms responsible for aging and adsorption in atmosphere with those in other environmental media. Further, the potential impacts of atmospherically aged MPs on climate, the biosphere, cryosphere, pedosphere, and hydrosphere are summarized. The review finally identifies key knowledge gaps and outlines perspectives for future research.

Unveiling the seasonal transport and exposure risks of atmospheric microplastics in the southern area of the Yangtze River Delta, China

This study investigates the prevalence and impacts of suspended atmospheric microplastics (SAMPs) in the coastal metropolitan city of Ningbo in the Yangtze River Delta Region, China. The sampling was conducted at both urban centre and urban-rural fringe areas, near the coast but distant from large urban populations. SAMP abundance ranged from 0.017 to 0.430 items m-³, with an average of 0.145 ± 0.09 items m⁻³. The urban centre exhibited approximately 70% more SAMPs than the urban-rural fringe, highlighting the influence of population density and human activity on microplastic pollution. Fibres dominated SAMP composition at both sites, while urban samples featured a greater variety of microplastic forms, such as fragments, beads, and films. Rayon and Polyethylene terephthalate were the predominant polymers, which were found to be directly related to local industrial activities. SAMPs ranged in size from 20 μm to 4984.4 μm, with over 60% smaller than 1000 μm. Seasonal variation followed a winter > autumn > spring > summer pattern. Correlation and principal component analyses identified atmospheric temperature, pressure, wind speed, and rainfall as key factors influencing SAMP abundance. Notably, backward trajectory analysis showed that oceanic air masses carried significantly fewer SAMPs compared to terrestrial air, diluting concentrations in coastal regions. Annually, an estimated 4.67 × 101³ microplastics are suspended over Ningbo. This is the first comprehensive study of SAMP pollution in this region, revealing interactions between local sources, environmental variations, air mass dynamics, and exposure. The findings underscore the need for targeted strategies to mitigate atmospheric microplastic pollution in coastal urban environments.

Characterization of atmospheric microplastics: A case study in Shenzhen City, a southern coastal area of China

The sources of atmospheric microplastics (AMPs) are complex and widely distributed. Microplastic pollution is particularly severe in urban areas. In this study, the abundance of AMPs was investigated at ten representative sampling points, with three points at an experimental building, and seven sample points at a residential district, an industrial area, a park, a farmland, a roadside, a river, and a seaside, respectively. The results show that the average abundance of AMPs is 2.22 n/m3, with a range from 1.31 to 4.5 n/m3. Human activities significantly contribute to the release of MPs. Furthermore, the abundance of AMPs decreases with increasing altitude. The predominant colors of AMPs are black and transparent, and particle sizes predominantly range from 50 to 200 µm. The micro-Fourier transform infrared spectrometer (µ-FTIR) analysis indicates that AMPs are primarily composed of polyethylene (PE), polypropylene (PP), and polyethylene terephthalate (PET), with fibrous shapes being predominant. In the principal component analysis (PCA), it was observed that AMPs exhibit a positive correlation with temperature and a negative correlation with humidity. This research may shed new light on future policy-making in microplastic control.

Physicochemical characteristics of airborne microplastics of a typical coastal city in the Yangtze River Delta Region, China

Airborne microplastics (MPs) are important pollutants that have been present in the environment for many years and are characterized by their universality, persistence, and potential toxicity. This study investigated the effects of terrestrial and marine transport of MPs in the atmosphere of a coastal city and compared the difference between daytime and nighttime. Laser direct infrared imaging (LDIR) and polarized light microscopy were used to characterize the physical and chemical properties of MPs, including number concentration, chemical types, shape, and size. Backward trajectories were used to distinguish the air masses from marine and terrestrial transport. Twenty chemical types were detected by LDIR, with rubber (16.7%) and phenol-formaldehyde resin (PFR; 14.8%) being major components. Three main morphological types of MPs were identified, and fragments (78.1%) are the dominant type. MPs in the atmosphere were concentrated in the small particle size segment (20-50 µm). The concentration of MPs in the air mass from marine transport was 14.7 items/m3 - lower than that from terrestrial transport (32.0 items/m3). The number concentration of airborne MPs was negatively correlated with relative humidity. MPs from terrestrial transport were mainly rubber (20.2%), while those from marine transport were mainly PFR (18%). MPs in the marine transport air mass were more aged and had a lower number concentration than those in the terrestrial transport air mass. The number concentration of airborne MPs is higher during the day than at night. These findings could contribute to the development of targeted control measures and methods to reduce MP pollution.

Influence of meteorological conditions on atmospheric microplastic transport and deposition

Atmospheric microplastics are of great concern because of their potential impact on the environment and human health. Although several studies have shown the presence of large quantities of microplastics in the air, questions about the transport and deposition of microplastics in the atmosphere remain unanswered. Based on these shortcomings, this review provides a comprehensive overview of the influence of meteorological conditions on atmospheric microplastic fate. Dry and wet deposition are the main removal mechanisms for atmospheric microplastic. Furthermore, by exploring how wind facilitates the long-range transport of microplastics between terrestrial and marine ecosystems, establishing a global microplastic cycle. Besides, this review also examines the effects of other meteorological conditions on atmospheric microplastic transport. Characteristics of current atmospheric microplastic models are summarized, particularly with respect to the consideration of meteorological conditions. Finally, we propose future research directions and mitigation measures for atmospheric microplastic pollution, which are necessary for mitigating atmospheric microplastic pollution and protecting ecosystems and human health.

It is snowing microplastics in Western Siberia

The atmosphere is an important transport medium for polymeric anthropogenic particles such as microplastics (MPs). The analysis of particles deposited on the snowpack enables monitoring the abundance and transport of MPs and semi-synthetic fibers. In the current study, the abundance of MPs and man-made textile fibers in deposited snow in Western Siberia, Russia, was investigated in a large area ranging from the Altai Mountains (52°01″N) to the Arctic Circle (66°30″N). Rayon fibers accounted for 44% of all detected particles, while the remaining 56% were MPs made of PET, PA, PC, PP and other plastics. The highest number of MPs and fibers per unit area was 2817 ± 915 items m-2 with an estimated daily deposition rate of 25.8 items m-2 d-1. The maximum calculated mass particle load was 4444 ± 1530 mg m-2 or 34.9 ± 12 mg L-1 of melted snow. Particle concentrations in snow were generally higher in the southern parts of Western Siberia but did not significantly correlate with population density. The Lagrangian dispersion model FLEXPART was used to estimate the geographical patterns of potential sources of the fibers detected in the snow in Western Siberia. Our analysis shows that particles can reach the sampling sites via both short-range and long-range atmospheric transport, including the possibility of cross-border transport for the smaller particle sizes.

Airborne microplastic monitoring: Developing a simplified outdoor sampling approach using pollen monitoring equipment

A novel, yet simple, airborne microplastic (MP) sampling approach using global pollen monitoring equipment was applied to identify, characterise and quantify outdoor airborne MPs for the first time. Modification of Burkard spore trap tape adhesive provided particle capture and facilitated downstream spectroscopy analysis. 36 polymer types were identified from a total of 21 days sampling using Burkard spore traps at two locations (United Kingdom and South Africa). MPs were detected in 95 % of daily samples. Mean MP particle levels were 2.0 ± 0.9 MP m-3 (11 polymer types) in Hull (U.K.), during March, 2.9 ± 2.0 MP m-3 (16 types) in Hull in July, and 11.0 ± 5.7 MP m-3 (29 types) in Gqeberha, (S.A.) in August 2023. The most abundant polymer type was nylon (Gqeberha). The approach was compared with two passive sampling methods whereby 27 polymer types were identified and of these, 6 types were above the limit of quantification (LOQ), with poly(methacrolein:styrene) (PMA/PS) the most abundant. Irregularly shaped MPs < 100 µm in length were predominant from all sampling approaches. For the first time, airborne MPs were chemically characterised and quantified using volumetric pollen sampling equipment, representing a viable approach for future airborne MP monitoring.

Fibrous microplastics in the environment: Sources, occurrence, impacts, and mitigation strategies

Fibrous microplastics (FMPs), a unique class of microplastics, are increasingly recognized as a significant environmental threat due to their ubiquitous presence and potential risks to ecological and human health. This review provides a comprehensive overview of FMPs, including their sources, prevalence in various environmental media, and potential impacts. FMPs, which can be found in over 90 % of certain environmental samples, originate from a diverse range of sources, including synthetic textiles, landfill waste, industrial emissions, and atmospheric deposition. These persistent pollutants pose a threat to both terrestrial and marine ecosystems. Their insidious presence can lead to ingestion by organisms, potentially disrupting ecosystems and posing risks to human health. Addressing the challenge of FMPs requires a multi-faceted approach. Reducing the production and use of synthetic fibers, implementing effective waste management practices, and developing new technologies to remove FMPs from wastewater and the broader environment are all crucial components of the solution. However, further research is essential to fully understand the long-term implications of FMPs on ecosystems and human health, laying the foundation for the development of robust and effective mitigation strategies.

Microplastic atmospheric pollution in an urban Southern Brazil region: What can spider webs tell us?

The World Health Organization categorizes air pollution as the presence of one or more contaminants in the atmosphere such as smoke, dust, and particulate matter like microplastics, which are considered a priority pollutant. However, only a few studies have been developed on atmospheric pollution, and knowledge about MPs in the atmosphere is still limited. Spider webs have been tested and used as a passive sampling approach to study anthropogenic pollution. Despite this, studies on microplastic contamination using spiderwebs as samplers are scarce. Thus, this study uses spider webs as passive indicators to investigate air quality regarding microplastic contamination in an urbanized area. Therefore, 30 sampling points were selected, and webs of Nephilingis cruentata were collected. The spider webs were dipped in KOH 10 %. After digestion, the solution was washed and sieved through a 90 µm geological sieve. The remaining material was transferred to a Petri dish with filter paper, quantified, and identified by type and color. The chemical composition of the polymers was determined using Raman spectroscopy. 3138 microplastics were identified (2973 filaments and 165 fragments). The most frequent colors were blue and black. Raman spectroscopy revealed five types of polymers: Isotactic Polypropylene, Polyethylene Terephthalate, Polyurethane, Polyamide, and Direct Polyethylene.

Distribution Characteristics of Atmospheric Microplastics in Typical Desert Agricultural Regions

We examined the distribution characteristics of atmospheric microplastics in typical desert agricultural regions, with a focus on the agricultural areas surrounding the Taklamakan Desert, Xinjiang, China. We collected samples of total suspended particulate matter (TSP), atmospheric deposition, and atmospheric dust using both active and passive collection methods. The chemical composition, particle size, shape, and color of atmospheric microplastics were examined using a stereomicroscope and a Fourier-transform infrared spectrometer to analyze their characteristics. The results showed that the primary chemical compositions of microplastics included polypropylene (PP), polyethylene, polyethylene terephthalate, polymethylmethacrylate, and cellophane. Particle sizes were mainly within the range of 0 to 1000 μm. Fibrous microplastics constituted the majority of the TSP and atmospheric deposition, whereas film-like microplastics constituted the largest proportion of atmospheric dustfall. The deposition flux of atmospheric microplastics in the first quarter was measured at 103.21 ± 22.12 particles/m2/day, which was lower than that observed in conventional agricultural areas. The abundance of microplastics in atmospheric dustfall was found to be 1.36 particles/g. The proportion of PP microplastics in atmospheric dustfall can be as high as 35%. Through a comparison of microplastic content in TSP during dust storms and under normal weather conditions, it was found that dust storms can lead to an increase in the abundance of microplastics within the atmospheric TSP. The present study provides a scientific basis for understanding the distribution of atmospheric microplastics in typical desert agricultural regions. Environ Toxicol Chem 2024;43:1982-1995. © 2024 SETAC.

Atmospheric deposition of microplastics at a western China metropolis: Relationship with underlying surface types and human exposure

The issue of atmospheric microplastic (AMP) contamination is gaining increasing attention, yet the influencing factors and human exposure are not well-understood. In this study, atmospheric depositions were collected in the megacity of Chengdu, China, to investigate the pollution status and spatial disparities in AMP distribution. The relationship between AMP abundance and underlying surface types was then analyzed with the aid of back trajectory simulation. Additionally, a probabilistic estimation of human exposure to AMP deposition during outdoor picnics was provided, followed by the calculation of AMP loading into rivers. Results revealed that the mean deposition flux ranged within 207.1-364.0 N/m2/d (14.17-33.75 μg/m2/d), with significantly larger AMP abundance and sizes in urban compared to rural areas. Areas of compact buildings played an important role in contributing to both fibrous and non-fibrous AMP contamination from urban to rural areas, providing new insight into potential sources of pollution. This suggests that appropriate plastic waste disposal in compact building areas should be prioritized for controlling AMP pollution. Besides, the median ingestion of deposited AMPs during a single picnic was 34.9 N/capita/hour (3.03 × 10-3 μg/capita/hour) for urban areas and 17.8 N/capita/hour (7.74 × 10-4 μg/capita/hour) for suburbs. Furthermore, the worst-case scenario of AMPs loading into rivers was investigated, which could reach 170.7 kg in summertime Chengdu. This work could contribute to a better understanding of the status of AMP pollution and its sources, as well as the potential human exposure risk.

Airborne transboundary microplastics-A Swirl around the globe

Microplastics are persistent pollutants discovered and extensively researched in marine, freshwater, and terrestrial ecosystems but have yet to receive attention in an atmospheric context. Although recent reports stated the presence of microplastics in the air, their global existence and distribution are not critically discussed to date. This review aimed to investigate the current status of research on atmospheric microplastics through bibliometric analysis and by comparing and summarising published research on global distribution. The review also provides a summary of methods that have been used to collect samples, identify microplastics, quantify their occurrence, and determine their transport mechanisms. The bibliometric analysis revealed that atmospheric microplastic studies predominantly originated in China. Clothing, vehicle, and tire materials were the major primary sources while house furniture, construction materials, landfills, urban dust, plastic recycling processes, and agricultural sludge were precursor secondary sources. Polyethylene, polypropylene, and polyethylene terephthalate microfibres have most frequently found in indoor and outdoor atmospheres. Level of urbanization and temporal or spatial distributions governs the fate of airborne microplastics, however, the knowledge gap in the retention and circulation of microplastics through the atmosphere is still large. Many challenges and limitations were identified in the methods used, presentation of data, aerodynamic processes facilitating atmospheric transport, and scarcity of research in spatially and temporally diverse contexts. The review concluded that there was a greater need for globalization of research, methods and data standardization, and emphasizes the potential for future research with atmospheric transportation modelling and thermochemical analysis.

Barnacle analysis as a microplastic pollution bioindicator on the East Coast of Surabaya

Background

Plastic pollution is a significant issue on the East Coast of Surabaya, emphasizing the need to develop microplastic monitoring programs. Barnacles became one of the potential microplastic bioindicator species on the East Coast of Surabaya. This study aimed to characterize the visual and polymers of microplastics found in barnacles and assess their potential as a bioindicator species for microplastic pollution on the East Coast of Surabaya.

Methods

Microplastic polymer analysis was performed using ATR-FTIR.

Results

A total of 196 microplastic particles were found in barnacles, water, and sediment. The size of microplastics in barnacles, water, and sediment varied, with the size in barnacles dominated by class 1 (1-10 µm), in water by class 2 (10-50 µm), and in sediments by class 3 (50-100 µm). Fragments dominated the shape of microplastics in barnacles, while water and sediment were dominated by fiber. The microplastic color in barnacles, water, and sediment was dominated by blue, and the microplastic polymer composition on barnacles, water, and sediments was dominated by cellophane (36%). Amphibalanus amphitrite was found to be predominant and identified as a potential microplastic bioindicator because it is a cosmopolitan species. Its population was found to correlate positively with cellophane (CP) accumulation. The Pearson's correlation test between barnacle length and microplastic length at a = 0.05 was inversely proportional to r =  - 0.411 (p < 0.05), categorized as a strong enough correlation. These findings are essential in developing monitoring programs and mitigating the impact of microplastics on the marine environment.

A multivariate analysis of microplastics in soils along the headwaters of Yangtze river on the Tibetan Plateau

Microplastics (MPs) are among the most widespread anthropogenic pollutants of natural environments, while limited research has focused on the fate of MPs in soils along the Plateau rivers. In this study, we investigated MPs in soils along the source areas of the Yangtze River on the Qinghai-Tibet Plateau. The results showed mean MP abundance values of (89.4 ± 51.0) and (64.4 ± 24.5) items/kg of dry soils around the tributary and mainstream areas, respectively. Film, transparent colors, and polyethylene were common shape, color, and compositions, respectively. The correlation analysis and PCA revealed that MP abundance was related to soil heavy metals (Cr and Ni) and nutrients (TOC and TP) (p < 0.05). Structural equation modeling also revealed that population density was the dominant driving factor contributing to MPs, with a total effect coefficient of 0.45. In addition, the conditional fragmentation model further distinguished the differences in MP sources from upstream to downstream along the Jinsha River. The significant sources of MPs in the bare land and grasslands from the upper reaches of the Jinsha River included traffic, tourism, and atmospheric transport. In contrast, MP transport during farming activities mainly contributed to MPs in the agricultural soil in the lower reaches.

Unveiling microplastics pollution in a subtropical rural recreational lake: A novel insight

While global attention has been primarily focused on the occurrence and persistence of microplastics (MP) in urban lakes, relatively little attention has been paid to the problem of MP pollution in rural recreational lakes. This pioneering study aims to shed light on MP size, composition, abundance, spatial distribution, and contributing factors in a rural recreational lake, 'Nikli Lake' in Kishoreganj, Bangladesh. Using density separation, MPs were extracted from 30 water and 30 sediment samples taken from ten different locations in the lake. Subsequent characterization was carried out using a combination of techniques, including a stereomicroscope, Fourier transform infrared spectroscopy (FTIR) and field emission scanning electron microscopy (FE-SEM). The results showed a significant prevalence of MPs in all samples, with an average amount of 109.667 ± 10.892 pieces/kg3 (dw) in the sediment and 98.167 ± 12.849 pieces/m3 in the water. Small MPs (<0.5 mm), fragments and transparent colored particles formed the majority, accounting for 80.2%, 64.5% and 55.3% in water and 78.9%, 66.4% and 64.3% in sediment, respectively. In line with global trends, polypropylene (PP) (53%) and polyethylene (PE) (43%) emerged as the predominant polymers within the MPs. MP contents in water and sediment showed positive correlations with outflow, while they correlated negatively with inflow and lake depth (p > 0.05). Local activities such as the discharge of domestic sewage, fishing waste and agricultural runoff significantly influence the distribution of polypropylene. Assessment of pollution factor, pollution risk index and pollution load index values at the sampling sites confirmed the presence of MPs, with values above 1. This study is a baseline database that provides a comprehensive understanding of MP pollution in the freshwater ecosystem of Bangladesh, particularly in a rural recreational lake. A crucial next step is to explore ecotoxicological mechanisms, legislative measures and future research challenges triggered by MP pollution.

Microplastics suspended in dust from different indoor environments in Barranquilla, Colombia: Predominant microparticles?

Considering that microplastics (MPs) are classified as ubiquitous pollutants, that air quality affects human health, and that people remain indoors most of the time, the need has arisen to evaluate the exposure to MPs within the suspended dust in indoor environments. With this objective, the present study carried out passive sampling to analyze the precipitation of microparticles in some indoor residential environments (2 apartments) and workplaces (an office, a pastry shop, a gift shop, and a paint shop) in Barranquilla, Colombia. The quantification and physical characterization of microparticles were carried out under a stereomicroscope, and the chemical characterization was carried out by infrared microspectroscopy (μFTIR). The highest average concentration of MPs in the apartments was found in the air-conditioned rooms (1.1 × 104 MP/m2/day), and concerning the workplaces, the gift shop and the paint shop were the spaces with a higher proportion of MPs (6.0-6.1 × 103 MP/m2/day), with polyesters being the main synthetic polymers, but being semi-synthetic particles the predominant among the samples. Regarding its morphology, fibers were the most abundant shape (>90%), grouping mainly in the 1000-5000 μm range, while the few fragments found were mostly grouped below 50 μm. Exposure by inhalation of MPs in adults was estimated between 1.7 × 102-1.6 × 103 MP/kg/day, while by ingestion it ranged between 2.7 × 102-2.4 × 103 MPs/kg/day. On the other hand, within our research, a significant presence of non-plastic microparticles was found, which reached up to 69% in analyzed samples, corresponding mainly to cotton and cellulose, so we suggest that these should also be included in future studies that aim to estimate potential health implications from exposure to suspended micropollutants.

Characteristics, distribution patterns and sources of atmospheric microplastics in the Bohai and Yellow Seas, China

Although the prevalence of microplastics in the atmosphere has recently received considerable attention, there is little information available regarding the distribution of atmospheric microplastics over oceanic regions. In this study, during the summer and autumn months of 2022, we investigated atmospheric microplastics in four marine regions off the eastern coast of mainland China, namely, the southern, middle, and northern regions of the Yellow Sea, and the Bohai Sea. The abundance of atmospheric microplastics in these regions ranged from 1.65 to 16.80 items/100 m3 during summer and from 0.38 to 14.58 items/100 m3 during autumn, although we detected no significant differences in abundance among these regions. Polyamide, chlorinated polyethylene, and polyethylene terephthalate were identified as the main types of plastic polymer. On the basis of meteorological data and backward trajectory model analyses, we established that the atmospheric microplastics detected during summer were mainly derived from the adjacent marine atmosphere and that over the continental landmass in the vicinity of the sampling area, whereas microplastics detected during autumn appear to have originated mainly from the northeast of China. By influencing the settlement and migration of microplastics, meteorological factors, such as relative humidity and wind speed, were identified as potential factors determining the distribution and characteristics of the detected microplastics. Our findings in this study, revealing the origin and fate of marine atmospheric microplastics, make an important contribution to our current understanding of the distribution and transmission of microplastics within the surveyed region and potentially worldwide.

Micro- and nano-plastics in the atmosphere: A review of occurrence, properties and human health risks

The ubiquitous occurrence of micro/nano plastics (MNPs) poses potential threats to ecosystem and human health that have attracted broad concerns in recent decades. Detection of MNPs in several remote regions has implicated atmospheric transport as an important pathway for global dissemination of MNPs and hence as a global health risk. In this review, the latest research progress on (1) sampling and detection; (2) origin and characteristics; and (3) transport and fate of atmospheric MNPs was summarized. Further, the current status of exposure risks and toxicological effects from inhaled atmospheric MNPs on human health is examined. Due to limitations in sampling and identification methodologies, the study of atmospheric nanoplastics is very limited today. The large spatial variation of atmospheric MNP concentrations reported worldwide makes it difficult to compare the overall indoor and outdoor exposure risks. Several in vitro, in vivo, and epidemiological studies demonstrate adverse effects of immune response, apoptosis and oxidative stress caused by MNP inhalation that may induce cardiovascular diseases and reproductive and developmental abnormalities. Given the emerging importance of atmospheric MNPs, the establishment of standardized sampling-pretreatment-detection protocols and comprehensive toxicological studies are critical to advance environmental and health risk assessments of atmospheric MNPs.

Human Exposure to Ambient Atmospheric Microplastics in a Megacity: Spatiotemporal Variation and Associated Microorganism-Related Health Risk

Microplastics are found in various human tissues and are considered harmful, raising concerns about human exposure to microplastics in the environment. Existing research has analyzed indoor and occupational scenarios, but long-term monitoring of ambient atmospheric microplastics (AMPs), especially in highly polluted urban regions, needs to be further investigated. This study estimated human environmental exposure to AMPs by considering inhalation, dust ingestion, and dermal exposure in three urban functional zones within a megacity. The annual exposure quantity was 7.37 × 104 items for children and 1.06 × 105 items for adults, comparable with the human microplastic consumption from food and water. Significant spatiotemporal differences were observed in the characteristics of AMPs that humans were exposed to, with wind speed and rainfall frequency mainly driving these changes. The annual human AMP exposure quantity in urban green land spaces, which were recognized as relatively low polluted zones, was comparable with that in public service zones and residential zones. Notably, significant positive correlations between the AMP characteristics and the pathogenicity of the airborne bacterial community were discovered. AMP size and immune-mediated disease risks brought by atmospheric microbes showed the most significant relationship, where Sphingomonas might act as the potential key mediator.

Comparative study on physicochemical characteristics of atmospheric microplastics in winter in inland and coastal megacities: A case of Beijing and Shanghai, China

Atmospheric microplastics (MPs) have received global attention across various sectors of society due to their potential negative impacts. This study aims to understand the physicochemical characteristics of MPs in inland and coastal megacities for raising awareness about the urgent need to reduce plastic pollution. Laser Direct Infrared Imaging (LDIR) and Scanning Electron Microscopy (SEM) with Energy Dispersive X-ray Spectroscopy (EDX) techniques were employed to characterize atmospheric MPs in megacities (inland megacity Beijing and coastal megacity Shanghai) in China, focusing on their physicochemical characteristics, including compositional types, number concentration, morphology, size, possible sources, and potential health risks. The LDIR analysis identified sixteen different types of MPs present in the atmospheres of Beijing and Shanghai. The number concentration of atmospheric MPs in Beijing (3.0 items/m3) is 1.8 times that of Shanghai (1.7 items/m3). The study found that the variations in MP pollution between Beijing and Shanghai are influenced by the urban industrial structure and geographical location. Morphological analysis indicates that fragment MPs have the highest relative abundance in Beijing, while fibrous MPs dominate the atmosphere of Shanghai. Additionally, the study assessed the potential health risks of atmospheric MPs to urban residents. The results suggest that residents of Beijing face more severe health risks from atmospheric MPs compared to those in Shanghai. These findings underscore the urgency to address the issue of atmospheric MPs and provide crucial evidence for the formulation of relevant environmental and health policies.

Long-term presence of microplastics in aerobic and anaerobic sequential batch reactors: Effect on treatment, microbial diversity, and microplastics morphology

Sewage treatment plants (STPs) are identified as the significant sink and source of microplastics (MPs) in aquatic bodies and terrestrial systems. A major fraction of MPs gets retained in STPs for a longer duration, and their potentiality for secondary MPs generation and additives leaching remain under investigated. Therefore, this study focussed on the effect of long-term exposure of aerobic and anaerobic biological sewage treatment units on MPs, along with the effect of MPs on treatment efficiency and microbial consortium. A mixture of polyvinyl chloride, polystyrene, and nylon MPs at 262 MPs/L was spiked in the aerobic and anaerobic sequential batch reactors (SBRs) for 120 days at the start of study. The study revealed a release of noteworthy fraction of secondary MPs into the reactors from spiked MPs. At the end of 120th day, the presence of secondary generated MPs was estimated as 1000 ± 71 MPs/L and 650±141 MPs/L in aerobic and anaerobic SBRs respectively. Most of the observed secondary MPs were of size < 300 µm. Leaching of additives, i.e. cyclohexylamine, cyclotetradecane, octadecanol, pipericine etc., into the SBR effluents were also observed. The depuration capacities of the reactors were not affected with the presence of MPs during the study. While the microbial diversity and abundance were negatively impacted in aerobic SBRs, no such impacts were observed in anaerobic SBRs due to MPs. These results do suggest such exposures to potentially cause secondary MPs and chemical pollution in receiving matrices for the treated effluent, as well as effect on the native microbial community.

New insights into the long-term dynamics and deposition-suspension distribution of atmospheric microplastics in an urban area

Atmospheric microplastics (AMPs) transmitted through the atmosphere are critical to global microplastic pollution. However, little is known about the long-term dynamics and distribution patterns of deposited (DAMPs) and suspended (SAMPs) AMPs. In this study, simultaneous sampling was conducted over one year to examine the deposition-suspension distribution of AMPs. Monthly and seasonal variations in abundance were evident, with an annual average of 302.31 ± 107.40 items/m2/day for DAMPs and 1.31 ± 0.62 items/m3 for SAMPs. The dynamics of DAMP and SAMP abundance demonstrated the dynamic distribution of AMPs between deposition and suspension. Both meteorological factors and particle features were found to influence the AMP distribution, manifesting as morphological differences and abundance variations. AMPs were most likely derived from traffic, industry, construction, and synthetic textiles, with diverse source areas up to 1750 km away. The estimated deposition flux of 7.28 × 1014 items per year and inhalation exposure of up to 12,777 items per year highlight the potential ecological and health risks of AMPs.

Microplastics in Ecuador: A review of environmental and health-risk assessment challenges

Pollution from plastic debris and microplastics (MPs) is a worldwide issue. Classified as emerging contaminants, MPs have become widespread and have been found not only in terrestrial and aquatic ecosystems but also within the food chain, which affects both the environment and human health. Since the outbreak of COVID-19, the consumption of single-use plastics has drastically increased, intensifying mismanaged plastic waste in countries such as Ecuador. Therefore, the aim of this review is to 1) summarize the state of MP-related knowledge, focusing on studies conducted with environmental matrices, biota, and food, and 2) analyze the efforts by different national authorities and entities in Ecuador to control MP contamination. Results showed a limited number of studies have been done in Ecuador, which have mainly focused on the surface water of coastal areas, followed by studies on sediment and food. MPs were identified in all samples, indicating the lack of wastewater management policies, deficient management of solid wastes, and the contribution of anthropogenic activities such as artisanal fishing and aquaculture to water ecosystem pollution, which affects food webs. Moreover, studies have shown that food contamination can occur through atmospheric deposition of MPs; however, ingredients and inputs from food production, processing, and packaging, as well as food containers, contribute to MP occurrence in food. Further research is needed to develop more sensitive, precise, and reliable detection methods and assess MPs' impact on terrestrial and aquatic ecosystems, biota, and human health. In Ecuador specifically, implementing wastewater treatment plants in major cities, continuously monitoring MP coastal contamination, and establishing environmental and food safety regulations are crucial. Additionally, national authorities need to develop programs to raise public awareness of plastic use and its environmental effects, as well as MP exposure's effects on human health.

Interactions of humic acid with pristine poly (lactic acid) microplastics in aqueous solution

Microplastics and natural organic matter are present in the aquatic environment and their reciprocal interaction plays important roles in the transport and behavior of nutrients and contaminants. Nevertheless, we lack mechanistic understanding on these interactions, especially in the case of biodegradable plastics. Here we investigate the adsorption of a commercial humic acid onto poly (lactic acid) (PLA) microplastics in aqueous solution. While the pseudo-second order kinetic model provided a more accurate representation of the adsorption kinetics, the Elovich model also produced a good fit, suggesting that chemisorption may be the rate-limiting step. The equilibrium data was better fit by the Langmuir model, that provided a maximum adsorption capacity of 0.118 ± 0.006 mg·g-1. The obtained values for the separation factor (RL) and free energy (E) suggest that adsorption of humic acid onto PLA is controlled by physisorption. We studied the effects of pH, ionic strength, and PLA concentration on the adsorption of humic acid onto PLA and demonstrated that electrostatic interactions and aggregation are important. The humic acid was characterized by Fourier-transform infrared (FTIR) spectroscopy, excitation-emission matrix (EEM) fluorescence spectroscopy, and parallel factor analysis (PARAFAC), before and after interacting with PLA. This set of analyses demonstrated that PLA caused alterations in the molecular structure of humic acid, primarily attributed to modifications in hydrogen bonding and hydrophobic interactions. Therefore, we hypothesize that the carboxylic groups of humic acid formed dimers in contact with PLA. This study provides new insights into the interactions between organic matter and a biodegradable microplastic in aqueous systems.

A mini-review on plasticrusts: occurrence, current trends, potential threats, and recommendations for coastal sustainability

Plasticrusts manifest as a coating on intertidal rocks due to environmental exposure. They refer to crushed plastic debris that blankets rocks found along intertidal shorelines. This study significantly contributes to a better understanding of the occurrence of these novel plastic formations, shedding light on their potential pathways of formation during the Anthropocene era. The research provides comprehensive insights into the composition, origins, challenges, and effective management strategies for removing coastal plastic litter. The findings of this investigation offer valuable evidence regarding the formation and impact of these recently discovered plastic items in coastal regions, prompting discussions about their formation processes and their effects on the marine ecosystem. Recognizing that these newly emerged plastic litter pose a considerable threat to the marine environment is crucial. With their emergence, we face an environmental challenge, especially concerning the health of coastal ecosystems. Plasticrusts, when degraded, can release microplastics (MPs) and nanoparticles (NPs) into the surrounding environment. These micro- and nano-sized plastic particles pose significant ecological risks as they persist in ecosystems, potentially harming wildlife and entering the food chain, causing widespread environmental contamination. Significantly, it outlines strategies to minimize the impact of this emerging plastic debris and its source.

Microplastic contamination in commercially packaged edible seaweeds and exposure of the ethnic minority and local population in Mexico

Diet is an important pathway for microplastic exposure. This study examined distinct edible seaweed products sold at ethnic food stores in Mexico for microplastic contamination, as well as the exposure of the Asian ethnic minority and local population to microplastics. Microplastics were extracted from seaweed samples using a wet oxide digestion with hydrogen peroxide followed by zinc chloride density separation. They were subsequently detected, quantified, and the polymer type was determined via microscopic inspection and Fourier transform infrared spectroscopy. Microplastic contamination was detected in all samples, with an average abundance of 24.0 ± 9.4 items g-1. Fibrous-shaped (61 %) and non-colored (57 %) microplastics were prevalent. Microplastics with sizes smaller than 0.2 mm prevailed (60 %), and they have the potential to penetrate gut barriers and endanger human health. Polymers identified consisted of polyethylene-polypropylene, polyamide, cellophane, rayon, and polyethylene terephthalate. According to pollution load index values, seaweed samples were minimally contaminated with microplastics, with values ranging between 3.7 and 6.0. The estimated yearly intake of microplastic from seaweed consumption by the South Korean and Chinese populations in Mexico was 5.8 × 104 ± 2.3 × 104 and 5.7 × 104 ± 4.9 × 104, respectively. This study's findings highlight the importance of improved control measures for minimizing microplastics in foods for export.

A comprehensive review of micro- and nano-plastics in the atmosphere: Occurrence, fate, toxicity, and strategies for risk reduction

Micro- and nano-plastics (MNPs) have received considerable attention over the past 10 years due to their environmental prevalence and potential toxic effects. With the increase in global plastic production and disposal, MNP pollution has become a topic of emerging concern. In this review, we describe MNPs in the atmospheric environment, and potential toxicological effects of exposure to MNPs. Studies have reported the occurrence of MNPs in outdoor and indoor air at concentrations ranging from 0.0065 items m-3 to 1583 items m-3. Findings have identified plastic fragments, fibers, and films in sizes predominantly <1000 μm with polyamide (PA), polyester (PES), polyethylene terephthalate (PET), polypropylene (PP), rayon, polyethylene (PE), polystyrene (PS), polyvinyl chloride (PVC), polyacrylonitrile (PAN), and ethyl vinyl acetate (EVA) as the major compounds. Exposure through indoor air and dust is an important pathway for humans. Airborne MNPs pose health risks to plants, animals, and humans. Atmospheric MNPs can enter organism bodies via inhalation and subsequent deposition in the lungs, which triggers inflammation and other adverse health effects. MNPs could be eliminated through source reduction, policy/regulation, environmental awareness and education, biodegradable materials, bioremediation, and efficient air-filtration systems. To achieve a sustainable society, it is crucial to implement effective strategies for reducing the usage of single-use plastics (SUPs). Further, governments play a pivotal role in addressing the pressing issue of MNPs pollution and must establish viable solutions to tackle this significant challenge.

Spatial distribution, source apportionment and potential ecological risk assessment of suspended atmosphere microplastics in different underlying surfaces in Harbin

Although suspended atmospheric microplastics (SAMPs) have been found to be ubiquitous and have potential impacts on human health, whereas studies related to source apportionment and potential ecological risk assessment in the atmospheric environment are still limited. This study investigated spatial distribution, source apportionment and potential ecological risk of SAMPs in six underlying surfaces of Harbin, China. The results show that all six underlying surfaces existed SAMPs, including polypropylene (PP), polyethylene terephthalate (PET) polyethylene (PE), polystyrene (PS) and polyvinyl chloride (PVC), with approximate 26.13 %, 24.10 %, 23.87 %, 13.51 %, and 12.39 %, respectively. SAMPs abundances from filtered air were relatively high and averaged 1.76 n/m3. The SAMPs mainly contained fibrous (59.01 %), fragmented (30.18 %), and granular (10.81 %) with transparent (62.39 %), black 13.74 %), red (7.43 %), white (6.53 %), blue, and yellow (3.60 %), and particle size ranged from 1.3 to 518 μm. In addition, source apportionment of SAMPs shows that SAMPs were originated from five emission sources including living source (19.53 %), construction source (12.08 %), transportation source (47.25 %), industrial source (5.11 %), and agricultural source (16.13 %) in Harbin. A significant correction was observed between SAMPs abundances and human activity (R = 0.68, P = 0.66), atmospheric humidity (R = -0.40, P = 0.02), and wind direction (R = 0.22, P = 0.04) in different underlying surface. Furthermore, potential ecological hazardous single index (EI) of PVC and PS were higher than PP, PET, and PS in the construction land, cultivated land, forest land, grassland, water area, and unused land. An estimation of the potential ecological risk index (RI) from SAMPs using Positive Matrix Factorization (PMF) model indicated that Harbin presented a minor ecological risk with average 16.59 of RI index of microplastics in environments. In conclusion, data in this study indicate that SAMPs are existed in atmospheric environments, which have possible risks for human health via inhalation.

Occurrence, characteristics, and factors influencing the atmospheric microplastics around Jiaozhou Bay, the Yellow Sea

Atmospheric microplastics are attracting increasing attention as an emerging pollutant. However, research on its characteristics and influencing factors is insufficient. This study examines the characteristics and spatiotemporal distribution of atmospheric microplastics around Jiaozhou Bay, the Yellow Sea. The results showed that the dominant shapes of microplastic were fragments (61.9 %) and fibers (25.6 %), and the main types were polyethylene terephthalate (23.8 %), polyethylene (31.6 %) and cellulose (rayon, 34.9 %). The deposition rate of microplastic varied from 8.395 to 80.114 items·m-2·d-1, with a mean of 46.708 ± 21.316 items·m-2·d-1. The deposition rate was higher in the dry season than in the rainy season, indicating the influence of weather condition. The annual mass of atmospheric microplastics entering the bay was estimated to be 7.612 ± 3.474 tons. For the first time, this study reveals that atmospheric microplastics in Jiaozhou Bay change spatiotemporally due to monsoons, which pose a potential threat to marine ecosystems.

Vertical distribution and transport of microplastics in the urban atmosphere: New insights from field observations

The distribution and transport of atmospheric microplastics (AMPs) have raised concerns regarding their potential effects on the environment and human health. Although previous studies have reported the presence of AMPs at ground level, there is a lack of comprehensive understanding of their vertical distribution in urban environments. To gain insight into the vertical profile of AMPs, field observations were conducted at four different heights (ground level, 118 m, 168 m and 488 m) of the Canton Tower in Guangzhou, China. Results showed that the profiles of AMPs and other air pollutants had similar layer distribution patterns, although their concentrations differed. The majority of AMPs were composed of polyethylene terephthalate and rayon fibers ranging from 30 to 50 μm. As a result of atmospheric thermodynamics, AMPs generated at ground level were only partially transported upward, leading to a decrease in their abundance with increasing altitude. The study found that the stable atmospheric stability and lower wind speed between 118 m and 168 m resulted in the formation of a fine layer where AMPs tended to accumulate instead of being transported upward. This study for the first time delineated the vertical profile of AMPs within the atmospheric boundary layer, providing valuable data for understanding the environmental fate of AMPs.

Effects of agricultural land types on microplastic abundance: A nationwide meta-analysis in China

Microplastics (MPs) accumulation in agricultural land that possibly poses threats to food security and human health has recently attracted increasing attention. Land use type probably is a key factor that drives the contamination level of soil MPs. Nevertheless, few studies have performed large-scale systematic analysis of the effects in different agricultural land soils on the MPs abundance. In this study, we constructed a national MPs dataset comprising 321 observations from 28 articles, summarised the current status of microplastic pollution in five agricultural land types in China through meta-analysis, and investigated the effects and key factors of agricultural land types on microplastic abundance. The results showed that among the existing soil microplastic research, vegetable soils maintained a higher environmental exposure distribution than other agricultural lands, and with the most common trend being vegetable land > orchard land > cropland > grassland. By combining agricultural practices, demographic economic factors and geographical factors, a potential impact identification method based on subgroup analysis was established. The findings demonstrated that agricultural film mulch significantly increased soil MPs abundance, especially in orchards. Increased population and economy (carbon emissions and PM2.5 concentrations) add MPs abundance in all kinds of agricultural lands. And the significant changes of effect sizes in high-latitude and mid-altitude areas suggested that geographical space differences exerted a certain degree of impact on the soil distribution of MPs. By the proposed method, different levels of MPs risk areas in agricultural soils can be more reasonably and effectively identified, which will provide type-specific policies technical and theoretical support for the precise management of MPs in agricultural land soils.

Plastic rain-Atmospheric microplastics deposition in urban and peri-urban areas of Patna City, Bihar, India: Distribution, characteristics, transport, and source analysis

Evidence of atmospheric microplastics (MPs) deposition in India is scarce though reports of MPs pollution in other environmental media exist. Henceforth, this study for the first time examines and compares the abundance, characteristics, transport, and source analysis of atmospheric MPs in the urban and peri-urban areas of Patna city, Bihar, India. Wet atmospheric fallout samples were collected and analyzed for MPs deposition rate. The results showed that the mean MPs concentrations at each site were 1959.6 ± 205 (urban) and 1320.4 ± 126 (peri-urban) MPs/m²/day. The deposited MPs were mainly transparent fibers and fragments with a mean size of 347.9 ± 189.2 µm. Polyethylene terephthalate and polypropylene were the most abundant polymer found at both sites. Morphological characteristics revealed surface degradation and deposition of metal contaminants on the identified MPs. Meteorological parameters (wind direction and rainfall intensity) were significantly associated with the distribution of atmospheric MPs in the study area. The cluster mean backward trajectory suggested vehicular emissions, construction activities, and waste mismanagement as the potential sources of MPs. Findings of the present work necessitates future studies in gaining a deeper understanding of the fate, movement, and potential health hazards associated with atmospheric MPs.

Microplastics and anthropogenic debris in rainwater from Bahia Blanca, Argentina

Concern about atmospheric microplastic (MP) contamination has increased in recent years. This study assessed the abundance of airborne anthropogenic particles, including MPs, deposited in rainfall in Bahia Blanca, southwest Buenos Aires, Argentina. Rainwater samples were collected monthly from March to December 2021 using an active wet-only collector consisting of a glass funnel and a PVC pipe that is only open during rain events. Results obtained show that all rain samples contained anthropogenic debris. The term "anthropogenic debris" is used to refer to the total number of particles as not all the particles found could be determined as plastic. Among all the samples, an average deposition of 77 ± 29 items (anthropogenic debris) m^-2d^-1 was found. The highest deposition was observed in November (148 items m^-2d^-1) while the lowest was found in March (46 items m^-2d^-1). Anthropogenic debris ranged in size from 0.1 mm to 3.87 mm with the most abundant particles being smaller than 1 mm (77.8%). The dominant form of particles found were fibers (95%), followed by fragments (3.1%). Blue color predominated (37.2%) in the total number of samples, followed by light blue (23.3%) and black (21.7%). Further, small particles (<2 mm), apparently composed of mineral material and plastic fibers, were recognized. The chemical composition of suspected MPs was examined by Raman microscopy. The analysis of μ-Raman spectra confirmed the presence of polystyrene, polyethylene terephthalate, and polyethylene vinyl acetate fibers and provided evidence of fibers containing industrial additives such as indigo dye. This is the first assessment of MP pollution in rain in Argentina.