Sulfide- and UV-induced aging differentially affect contaminant-binding properties of microplastics derived from commercial plastic products

In situ formed sulfide-mediated aging of polystyrene microplastics and its impact on the fate of heavy metals in anaerobic digestion

Microplastics (MPs) entering wastewater treatment plants accumulate in sludge and are subsequently introduced into anaerobic digesters, a key sludge treatment process. However, little is known about how MPs undergo transformation during anaerobic digestion (AD). This study investigated the mechanism underlying the aging of polystyrene (PS) MPs in AD and its effect on heavy metal adsorption. In the AD batches containing an initial sulfate concentration of 5.1 mM, significant sulfate reduction (96.1 %) was observed, with reduced sulfur species accounting for 74 % of the total sulfur species deposited on the PS surface, as revealed by X-ray photoelectron spectroscopy. A positive correlation between sulfide formation and the selective proliferation of sulfur-reducing bacteria, particularly Desulfovibrio aminophilus, indicated the involvement of microorganisms in sulfur aging. The decomposition of in situ hydrogen peroxide (H2O2) and formation of hydroxyl radicals (∙OH) under sulfidogenic conditions were more pronounced, suggesting that reactive oxygen species may induce structural changes in PS MPs and potentially facilitate sulfur aging. Finally, isothermal titration calorimetry results showed that sulfur-aged PS had higher binding constants for Pb²⁺ and Cu²⁺ compared to pristine PS, due to the presence of sulfur-containing functional groups and a more negative surface charge. These findings provide valuable insights into the fate of MPs during the sludge treatment and their potential environmental impacts.

Leaching-driven transformations of tire wear particles (TWPs): Uncovering the neglected environmental implications

Extensive research has been conducted on the leaching behavior and risks of the leachate of tire wear particles (TWPs) in aquatic environments. However, the leaching-driven transformations of TWPs and the subsequent environmental impacts have been largely overlooked. This work examines the changes in physicochemical properties of TWPs during leaching in several water bodies, thereby facilitating a more thorough assessment of the environmental impacts. The results revealed that the environmental behavior related properties of TWPs, including surface morphology, pores, contact angel, zeta potential, functional groups, and surface adsorption sites varied at different levels during leaching. The ionic strength and organic matter content of water body highly determine the above transformations. The carbon index (CI) and O/C ratio of TWPs increased by 55.40 % and 14.27 % after leached in the water for 30 days, while the adsorption capacity of the TWPs for tetracycline (TC) and oxytetracycline (OTC) decreased by 27 % and 24.63 %, respectively. Herein, the changes in the functional groups and polarity during leaching highly influenced the adsorption performance of leached-TWPs. This study provides novel insight into understanding the leaching behavior of TWPs in aquatic environments and highlights an urgent need to assess the environmental implications of leaching-driven transformations of TWPs.

Inhalation of nanoplastics in the mouse model: Tissue bio-distribution and effects on the olfactory system

The impact of plastic fragments on human health is currently under investigation, with nanoplastics (NPs) being particularly concerning due to their small size. This allows them to be inhaled, pass through blood barriers, and reach various organs. In this study, we evaluated the effects of airborne NPs on the mouse olfactory system, which is a primary target of NPs inhalation. Adult mice were exposed to an aerosol solution containing synthetic polystyrene nanoplastics (PS-NPs) labelled with a red fluorophore for 5 h a day over 7 days. Biodistribution analysis revealed that PS-NPs accumulated in tissues, such as brain, lung, adipose tissue, and testicles, but were cleared after one month. This study is the first to investigate the effects of inhaled PS-NPs on the olfactory bulb (OB) and subventricular neurogenesis in adult mice. We observed long-term impairments in olfactory discrimination, decreased neuronal functionality, and pro-inflammatory activation in microglia in OB following PS-NPs exposure. Surprisingly, we noted a compensatory increase in olfactory neurogenesis, although insufficient to counteract the olfaction impairment induced by the PS-NPs. These results provide novel insights into the potential neurotoxic effects of inhaled PS-NPs and emphasize the importance of assessing occupational and environmental exposure to these pollutants.

Microplastics in agricultural soil: Unveiling their role in shaping soil properties and driving greenhouse gas emissions

Microplastics (MPs) contamination is pervasive in agricultural soils, significantly influencing carbon and nitrogen biogeochemical cycles and altering greenhouse gas (GHG) fluxes. This review examines the sources, status, mechanisms, and ecological consequences of MPs pollution in agricultural soils, with a focus on how MPs modified soil physicochemical properties and microbial gene expression, ultimately impacting GHG emissions. MPs were found to reduce soil water retention, decreasing soil respiration and increasing emissions of CO2, CH₄, and N2O. They also enhanced soil aggregate stability and influenced soil organic carbon (SOC) sequestration, contributing further to GHG emissions. MPs-induced increases in soil pH were associated with suppressed CH₄ and N2O emissions, whereas the abundance of genes encoding enzymes for cellulose and lignin decomposition (e.g., abfA and mnp) stimulated enzyme activity, intensifying N2O release. Additionally, a reduced soil C/N ratio promoted denitrification processes. Changes in microbial communities, including increases in Actinomycetes and Proteobacteria, were observed, with a rise in genes associated with carbon cycling (abfA, manB, xylA) and nitrification-denitrification (nifH, amoA, nirS, nirK), further exacerbating CO2 and N2O emissions. This review provides valuable insights into the complex roles of MPs in GHG dynamics in agricultural soils, offering perspectives for improving environmental management strategies.

A comprehensive review of microplastic aging: Laboratory simulations, physicochemical properties, adsorption mechanisms, and environmental impacts

As a new type of ecological environment problem, microplastic pollution is a severe challenge faced by the world, and its threat and potential risk to the ecosystem have become a hot research spot in the current environmental field. Microplastics (MPs) in the natural environment will experience aging effect, aging will change the physical and chemical properties of MPs and affect the adsorption behavior. Recently reported characterization techniques of MPs and laboratory simulation of aging are reviewed. The aging mechanism between MPs and different pollutants and the intervention mechanism of environmental factors (MPs, pollutants and water quality environment) were revealed. In addition, to further understand the potential ecological toxicity of MPs after aging, the release and harm of additives during aging, produce the environmentally persistent free radicals, and the mechanism of reactive oxygen species (ROS) removal of pollutants adsorbed on the surface of MPs were summarized. Future research efforts should focus more on bridging the disparity between laboratory aging simulations and natural environmental conditions to enhance the authenticity and ecological relevance of such studies. The ROS production mechanism of MPs provides a reference direction for removing pollutants adsorbed by aged MPs.

MRI-based microplastic tracking in vivo and targeted toxicity analysis

Microplastics (MPs) as an emerging pollutant have raised significant concerns in environmental health. However, elucidating the distribution of MPs in living organisms remains challenging due to their trace residue and tough detection problems. In this study, a novel magnetic resonance imaging (MRI)-based tracking method was employed to monitor functionalized MPs biodistribution in vivo. Our results identified that the liver is the primary accumulation site of polystyrene microplastics (PS-MPs) in biological systems through continuous in vivo monitoring spanning 21 days. Biochemical tests were performed to assess the toxicological effects of functionalized MPs on the liver tissue, revealing hepatocyte death, inflammatory cell infiltration, and alterations in alkaline phosphatase levels. Notably, positively charged MPs exhibited more severe effects. A combined metabolomics-proteomics analysis further revealed that PS-MPs interfered with hepatic metabolic pathways, particularly bile secretion and ABC transporters. Overall, this study effectively assessed the distribution of functionalized MPs in vivo utilizing MRI technology, validated toxicity in targeted organ, and conducted an in-depth study on underlying biotoxicity mechanism. These findings offer crucial scientific insights into the potential impact of MPs in the actual environment on human health.

Transport of reduced PBAT microplastics in saturated porous media: Synergistic effects of enhanced surface energy and roughness

Microplastic (MP) pollution presents significant global environmental challenges, exacerbated by reduction aging processes in anoxic environments, thereby increasing environmental risks and potential threats to human health. However, the mechanisms underlying the transport of reduced MPs remain poorly understood. In this study, laboratory-scale column experiments were conducted to investigate the transport behavior of polybutylene adipate terephthalate (PBAT), a common biodegradable MPs, and its reduced products obtained through the aging process mediated by two typical reducing agents, NaBH4 and Na2S, under varying conditions (ionic strength (IS), divalent cations, and low molecular weight organic acids (LMWOAs)). The results indicated that reduction aging improved the hydrophilicity of PBAT by increasing the surface roughness (roughness factor increased from 1.300 to 1.642) and surface energy (from 51.80 to 107.03 mN m-1), thereby increasing the mobility of reduced PBAT (with recovery rate increased from 53.77 % to 63.18 %). Increased IS decreased the mobility of reduced PBAT by decreasing the surface negative charge density. Divalent cations inhibited the mobility of both pristine and reduced PBAT in porous media, with pristine PBAT, containing more oxygen functional groups, exhibiting stronger inhibition. Furthermore, LMWOAs promoted the retention of reduced PBAT in porous media, which was dependent on the type of LMWOAs. This study revealed the alterations in MPs properties caused by reduction aging and their effects on transport mechanisms, offering new insights into the transport behavior and environmental risks of reduced MPs.

Effects of plastic aging on biodegradation of polystyrene by Tenebrio molitor larvae: Insights into gut microbiome and bacterial metabolism

Plastics aging reduces resistance to microbial degradation. Plastivore Tenebrio molitor rapidly biodegrades polystyrene (PS, size: < 80 μm), but the effects of aging on PS biodegradation by T. molitor remain uncharacterized. This study examined PS biodegradation over 24 days following three pre-treatments: freezing with UV exposure (PS1), UV exposure (PS2), and freezing (PS3), compared to pristine PS (PSv) microplastic. The pretreatments deteriorated PS polymers, resulting in slightly higher specific PS consumption (602.8, 586.1, 566.7, and 563.9 mg PS·100 larvae-1·d-1, respectively) and mass reduction rates (49.6 %, 49.5 %, 49.2 %, and 48.7 %, respectively) in PS1, PS2, and PS3 compared to PSv. Improved biodegradation correlated with reduced molecular weights and the formation of oxidized functional groups. Larvae fed more aged PS exhibited greater gut microbial diversity, with microbial community and metabolic pathways shaped by PS aging, as supported by co-occurrence network analysis. These findings indicated that the aging treatments enhanced PS biodegradation by only limited extent but impacted greater on gut microbiome and bacterial metabolic genes, indicating that the T. molitor host have highly predominant capability to digest PS plastics and alters gut microbiome to adapt the PS polymers fed to them.

Adsorption of PFAS onto secondary microplastics: A mechanistic study

Microplastics (MPs) are abundant in aquatic systems. The ecological risks of MPs may arise from their physical features, chemical properties, and/or their ability to concentrate and transport other contaminants, such as per- and polyfluoroalkyl substances (PFAS). PFAS have been extracted from MPs found in natural waters. Still, there needs to be a mechanistic investigation of the effect of PFAS chemistry and water physicochemical properties on how PFAS partition onto secondary MPs. Here, we studied the influence of pH, natural organic matter (NOM), ionic strength, and temperature on the adsorption of PFAS on MPs generated from PET water bottles. The adsorption of PFAS to the MPs was thermodynamically spontaneous at 25 °C, based on Gibb's free energy (ΔG = -16 to -23 kJ/mol), primarily due to increased entropy after adsorption. Adsorption reached equilibrium within 7-9 h. Hence, PFAS will partition to the surface of secondary PET MPs within hours in fresh and saline waters. Natural organic matter decreased the capacity of secondary PET MPs for PFAS through electrosteric repulsion, while higher ionic strength favored PFAS adsorption by decreasing electrostatic repulsion. Increased pH increased electrostatic repulsion, which negated PFAS adsorption. The study provides fundamental information for developing models to predict interactions between secondary MPs and PFAS.

Microplastics derived from plastic mulch films and their carrier function effect on the environmental risk of pesticides

Plastic film mulching can maintain soil water and heat conditions, promote plant growth and thus generate considerable economic benefits in agriculture. However, as they age, these plastics degrade and form microplastics (MPs). Additionally, pesticides are widely utilized to control organisms that harm plants, and they can ultimately enter and remain in the environment after use. Pesticides can also be sorbed by MPs, and the sorption kinetics and isotherms explain the three stages of pesticide sorption: rapid sorption, slow sorption and sorption equilibrium. In this process, hydrophobic and partition interactions, electrostatic interactions and valence bond interactions are the main sorption mechanisms. Additionally, small MPs, biodegradable MPs and aged conventional MPs often exhibit stronger pesticide sorption capacity. As environmental conditions change, especially in simulated biological media, pesticides can desorb from MPs. The utilization of pesticides by environmental microorganisms is the main factor controlling the degradation rate of pesticides in the presence of MPs. Pesticide sorption by MPs and size effects of MPs on pesticides are related to the internal exposure level of biological pesticides and changes in pesticide toxicity in the presence of MPs. Most studies have suggested that MPs exacerbate the toxicological effects of pesticides on sentinel species. Hence, the environmental risks of pesticides are altered by MPs and the carrier function of MPs. Based on this, research on the affinity between MPs and various pesticides should be systematically conducted. During agricultural production, pesticides should be cautiously selected and used plastic film to ensure human health and ecological security.

Co-impacts of cation type and humic acid on migration of polystyrene microplastics in saturated porous media

The aging process of microplastics (MPs) could significantly change their physical and chemical characteristics and impact their migration behavior in soil. However, the complex effects of different cations and humic acids (HA) on the migration of aged MPs through saturated media are not clear. In this research, the migration and retention of pristine/aged PSMPs (polystyrene microplastics) under combined effects of cations (Na+, Ca2+) (ionic strength = 10 mM) and HA (0, 5, 15 mg/L) were investigated and analyzed in conjunction with the two-site kinetic retention model and DLVO theory. The findings showed that the aging process accelerated PSMPs migration under all tested conditions. Aged PSMPs were less susceptible to Ca2+ than pristine PSMPs. Under Ca2+ conditions, pristine/aged PSMPs showed higher retention than under Na+ conditions in the absence of HA. Furthermore, under Na+ conditions, the migration of aged PSMPs significantly increased at higher concentrations of HA. However, under Ca2+ conditions, the migration of aged PSMPs decreased significantly at higher concentrations of HA. In higher HA conditions, HA, Ca2+, and PSMPs interact to cause larger aggregations, resulting in the sedimentation of aged PSMPs. The DLVO calculations and two-site kinetic retention models' results showed the detention of PSMPs was irreversible under higher HA conditions (15 mg/L) with Ca2+, and aged PSMPs were more susceptible to clogging. These findings may help to understand the potential risk of migration behavior of PSMPs in the soil-groundwater environment.

Comparison of sulfide-induced transformation of biodegradable and conventional microplastics: Mechanism and environmental fate

Biodegradable plastics have been massively produced and used as potential substitutes for conventional plastics, resulting in their inevitable entry into the environment and generation of biodegradable microplastics (MPs). The sulfidation transformation of MPs is an important process for their transformation in anoxic environments (e.g., sediments, anaerobic activated sludges) that can alter their environmental effects and risks. However, how sulfides induce the transformation of biodegradable MPs and whether they are similar to conventional MPs remains unknown. In the present study, we compared the transformation and mechanism of conventional polyethylene (PE) MPs and biodegradable poly(butylene adipate-co-terephthalate) (PBAT) MPs during sulfidation. The results demonstrated that sulfidation resulted in oxidation of PE MPs, whereas PBAT MPs underwent reduction and had higher physical damage, as evidenced by fragmentation, chain scission and organic compound release. Besides, reactive oxygen species and sulfide species played important roles in the sulfidation of PE and PBAT MPs, respectively. The presence of ester groups in PBAT MPs led to their hydrolysis, causing chain scission and further reduction. Furthermore, sulfidation caused a higher degree of adsorption and toxicity alterations in PBAT MPs than in PE MPs. This work uncovers critical abiotic transformation behaviors of biodegradable microplastics and highlights the necessity of considering microplastic structural features to accurately predict microplastic occurrence.

The adsorption and release mechanism of different aged microplastics toward Hg(II) via batch experiment and the deep learning method

Aged microplastics are ubiquitous in the aquatic environment, which inevitably accumulate metals, and then alter their migration. Whereas, the synergistic behavior and effect of microplastics and Hg(II) were rarely reported. In this context, the adsorptive behavior of Hg(II) by pristine/aged microplastics involving polystyrene, polyethylene, polylactic acid, and tire microplastics were investigated via kinetic (pseudo-first and second-order dynamics, the internal diffusion model), Langmuir, and Freundlich isothermal models; the adsorption and desorption behavior was also explored under different conditions. Microplastics aged by ozone exhibited a rougher surface attached with abundant oxygen-containing groups to enhance hydrophilicity and negative surface charge, those promoted adsorption capacity of 4-20 times increment compared with the pristine microplastics. The process (except for aged tire microplastics) was dominated by a monolayer chemical reaction, which was significantly impacted by pH, salinity, fulvic acid, and co-existing ions. Furthermore, the adsorbed Hg(II) could be effectively eluted in 0.04% HCl, simulated gastric liquids, and seawater with a maximum desorption amount of 23.26 mg/g. An artificial neural network model was used to predict the performance of microplastics in complex media and accurately capture the main influencing factors and their contributions. This finding revealed that aged microplastics had the affinity to trap Hg(II) from freshwater, whereafter it released the Hg(II) once transported into the acidic medium, the organism's gastrointestinal system, or the estuary area. These indicated that aged microplastics could be the sink or the source of Hg(II) depending on the surrounding environment, meaning that aged microplastics could be the vital carrier to Hg(II).

Aging of plastics in aquatic environments: Pathways, environmental behavior, ecological impacts, analyses and quantifications

The ubiquity of plastics in our environment has brought about pressing concerns, with their aging processes, photo-oxidation, mechanical abrasion, and biodegradation, being at the forefront. Microplastics (MPs), whether originating from plastic degradation or direct anthropogenic sources, further complicate this landscape. This review delves into the intricate aging dynamics of plastics in aquatic environments under various influential factors. We discuss the physicochemical changes that occur in aged plastics and the release of oxidation products during their degradation. Particular attention is given to their evolving environmental interactions and the resulting ecotoxicological implications. A rigorous evaluation is also conducted for methodologies in the analysis and quantification of plastics aging, identifying their merits and limitations and suggesting potential avenues for future research. This comprehensive review is able to illuminate the complexities of plastics aging, charting a path for future research and aiding in the formulation of informed policy decisions.

The iron matters: Aged microplastics disrupted the iron homeostasis in the liver organoids

Plastic products undergo artificial and unintentional aging during daily use, causing the presence of aged microplastics (aMP). Humans are inevitably exposed to aMP. Liver is one of the critical target organs of MP through oral intake, however, limited research has focused on the hepatic toxicity of aMP compared to pristine MP (pMP). We utilized the human pluripotent stem cells-derived liver organoids (LOs) to compare the cytotoxicity of pristine polystyrene microplastics (pPS) (1 μm, carbonyl index 0.08) and aged polystyrene microplastics (aPS) (1 μm, carbonyl index 0.20) ranged from 20 to 200 ng/mL. Our findings indicate that aPS was more cytotoxic than pPS. We explored the disrupted iron homeostasis in terms of the [Fe2+] and [Fe3+] levels, iron storage and transport. A "vector-like effect" induced by aPS has been preliminarily suggested by the correlated change in total iron level and co-localization of PS and ferritin light chain (FTL) in the LOs following exposure to aPS and ferric ammonium citrate (FAC) individually and combinedly. In addition, we observed abnormal mitochondrial morphology, elevated lipid peroxidation, and declined GSH peroxidase activity, together with the declined expression of transferrin receptor (TFRC) and elevated expressions of SLC7A11, FTL. The gene handled iron transport and iron use were disrupted by aPS. Moreover, we employed FAC to introduce iron overload and Nacetylcysteine (NAC) to protect the lipid peroxidation. In aPS + FAC group, aggravated effects could be observed in aspects of [Fe2+] level, lipid peroxidation, and compromised expression levels of iron homeostasis-related markers, in contrast, in aPS + NAC group, most of changes recovered but the hepatocytoxicity remained. Specifically, a dimorphic change in elevated FTL and decreased ferritin heavy chain (FTH1) caused by 50 ng/mL aMP (57.33 ± 3.57 items/mL, equivalent to human intake level), indicated a specific response to low-dose aMP.

Microplastics and Nanoplastics Impair the Biophysical Function of Pulmonary Surfactant by Forming Heteroaggregates at the Alveolar-Capillary Interface

Microplastics (MPs) are ubiquitous environmental pollutants produced through the degradation of plastic products. Nanoplastics (NPs), commonly coexisting with MPs in the environment, are submicrometer debris incidentally produced from fragmentation of MPs. We studied the biophysical impacts of MPs/NPs derived from commonly used commercial plastic products on a natural pulmonary surfactant extracted from calf lung lavage. It was found that in comparison to MPs/NPs derived from lunch boxes made of polypropylene or from drinking water bottles made of poly(ethylene terephthalate), the MP/NP derived from foam packaging boxes made of polystyrene showed the highest adverse impact on the biophysical function of the pulmonary surfactant. Accordingly, intranasal exposure of MP/NP derived from the foam boxes also induced the most serious proinflammatory responses and lung injury in mice. Atomic force microscopy revealed that NP particles were adsorbed on the air-water surface and heteroaggregated with the pulmonary surfactant film. These results indicate that although the incidentally formed NPs only make up a small mass fraction, they likely play a predominant role in determining the nano-bio interactions and the lung toxicity of MPs/NPs by forming heteroaggregates at the alveolar-capillary interface. These findings may provide novel insights into understanding the health impact of MPs and NPs on the respiratory system.

Research progress on the role of biofilm in heavy metals adsorption-desorption characteristics of microplastics: A review

Microplastics (MPs) have been found to be widely distributed in aquatic environments, where they will interact with toxic heavy metals and result in more serious adverse effects on the aquatic environments and organisms. However, after entering the aquatic environments, MPs are quickly covered by biofilms, which significantly modify MPs properties and relevant heavy metals adsorption-desorption characteristics In order to better understand the adsorption behavior of heavy metals on biofilm developed MPs (BMPs), we comprehensively reviewed representative studies in this area. First, we summarized the formation process of biofilms on MPs. Subsequently, we reviewed the current understanding on the influence of biofilm formation on the properties of MPs and discussed the metal adsorption-desorption characteristics of MPs affected by these changes. Finally, based on the systematic literature review, some future research needs and strategies were proposed to further understand the interactions between MPs and heavy metals.