A parametric study of supercritical carbon dioxide extraction of oil from Moringa oleifera seeds using a response surface methodology

Effect of Extraction Methods and Preheat Treatments on the Functional Properties of Pumpkin Seed Protein Concentrate

This study explores the effect of different extraction methods and preheat treatments in obtaining protein concentrate from pumpkin seed flour. The effects on the yield and functional properties of pumpkin seed protein concentrate (PSPC) were compared alongside microwave and conventional preheating methods using alkali, salt, and enzyme-assisted alkali extraction techniques. Analytical assessments included proximate analysis, soluble protein content, water solubility index (WSI), emulsification activity (EA) and stability (ES), foaming capacity (FC) and stability (FS), and antioxidant activity (AA). Hydration and structural analyses were performed via time-domain nuclear magnetic resonance (TD-NMR) Relaxometry and Fourier-Transform Infrared (FTIR) Spectroscopy. In addition, color measurements were performed to evaluate the visual quality of the samples. The alkali extraction method paired with microwave heating (MH-AE) significantly outperformed other techniques, with an extraction yield and protein content of approximately 55% and 77%, respectively. This study demonstrated the superior yield and functional properties of PSPC using MH-AE, opening opportunities for future research in optimizing plant-based protein extraction techniques.

Composition and Characterization of Cold Pressed Moringa oleifera Seed Oil

The present study aims to investigate the volatile compound and the triacylglycerol profiles of Tunisian cold pressed Moringa oleifera seed oil (MoSO) and to assess its thermal properties and its biological activities. GC-MS analysis identified thirty six phyto-compounds amounting to 98.99% of the total oil. These compounds were classified into eleven groups among which the fatty acid one exhibited the highest intensity (91.63%). Cis, 6-octadecenoic acid was the most abundant compound (70.68%). The triacylglycerol composition of MoSO was characterized by the predominance of the glycerol trioleate (OOO) (32.42±0.12%). Thermogravimetric analysis of MoSO showed that the oil possess an interesting thermal stability with a highly Onset temperatures (T_onset) of 390.72°C and 357.47°C, respectively in nitrogen and air atmospheres. By using the ABTS assay, MoSO exhibited an interesting antioxidant capacity of 365 μM TEAC. The oil was also endowed with a relatively strong anti-inflammatory activity since its treatment at the different concentrations tested (75, 150 and 300 μg/mL). However, no antimicrobial activity was observed. On the basis of the obtained results, MoSO could be used in diverse industrial applications such as pharmaceutical, cosmetic, and food fields thanks to its thermal stability and interesting biological activities.

Process Optimization for Supercritical Carbon Dioxide Extraction of Origanum vulgare L. Essential Oil Based on the Yield, Carvacrol, and Thymol Contents

Background

Origanum vulgare L. essential oil (OEO) is widely known for its good biological activity, but different extraction methods with significant implications on the yield of OEO and the content of the thymol and carvacrol. As an efficient method for extracting essential oils (EO), the supercritical carbon dioxide extraction (SC-CO2) can improve the yield of EOs while protecting their main active components from loss.

Objective

In this study, the process optimization of SC-CO2 of OEO was carried out. The effects of extraction pressure, temperature, time, and modifier concentration on the composite score of OEO extraction process were investigated.

Method

Response surface analysis was performed using a Box-Behnken design with three levels and four independent variables. Steam distillation (SD) and lipophilic solvents (n-hexane) extraction (LSE) were compared with SC-CO2 for OEO yields. OEOs extracted by the three methods were qualitatively and semi-quantitatively analyzed by gas chromatography quadrupole-time-of-flight mass spectrometry and gas chromatography-flame ionization detector.

Results

The results showed that extraction pressure was the most significant factor affecting the OEO yield, thymol, and carvacrol content. In the optimal conditions (pressure: 217 bar, temperature: 54°C, time: 2 h, modifier concentration: 14%), the yield of OEO reached up to 1.136%, and the contents of thymol and carvacrol reached 53.172  and 41.785 mg/g, respectively.

Conclusions

SC-CO2 was the best extraction method compared to the other two methods. Under the optimal conditions, yield and the content of main components can be effectively improved. It can provide a theoretical basis for the industrial extraction of OEO.

Highlights

Taking the comprehensive score as the index, the interaction between the four independent variables in the supercritical fluid extraction process was evaluated by the response surface method. The effects of extraction parameters on the yield of EOs and the contents of thymol and carvacrol were comprehensively investigated.

An Evaluation of the Equilibrium Properties in Hexane and Ethanol Extractive Systems for Moringa oleifera Seeds and Fatty Acid Profiles of the Extracts

Until the present, oilseed extractions have been mainly performed using hexane: a toxic, non-sustainable solvent. Extraction methods using ethanol have recently been proposed and, to evaluate the suitability of ethanol as an alternative solvent, Moringa seeds with an oil content as high as 40% have been chosen to determine the equilibrium properties in solid–liquid ethanol extractions. The equilibrium constant (Keq) and the specific retained solution (M) of the extractive systems seeds–oil–hexane and seeds–oil–ethanol were determined and validated, following a counter-current multi-stage extraction model. The extractions were carried out at 40 and 50 °C, the mass to solvent ratios used were 1:5, 1:10 and 1:20, and shelled and unshelled seeds (kernels) were tested. The Keq and M of the different kinetics revealed that Keq was not infinite in the hexane systems, whereas the ethanol systems registered slightly lower values. Regarding M, although the seed powder allowed more rapid extractions, particle size was increased to reduce M for an easier phase preparation. Finally, a counter-current multi-stage extraction system was simulated and applied under suitable conditions. The fatty acid profiles for both types of extract were similar regarding their main components. definition:

Green Extraction of Bioactive Compounds from Plant Biomass and Their Application in Meat as Natural Antioxidant

Plant extracts are rich in various bioactive compounds exerting antioxidants effects, such as phenolics, catechins, flavonoids, quercetin, anthocyanin, tocopherol, rutin, chlorogenic acid, lycopene, caffeic acid, ferulic acid, p-coumaric acid, vitamin C, protocatechuic acid, vitamin E, carotenoids, β-carotene, myricetin, kaempferol, carnosine, zeaxanthin, sesamol, rosmarinic acid, carnosic acid, and carnosol. The extraction processing protocols such as solvent, time, temperature, and plant powder should be optimized to obtain the optimum yield with the maximum concentration of active ingredients. The application of novel green extraction technologies has improved extraction yields with a high concentration of active compounds, heat-labile compounds at a lower environmental cost, in a short duration, and with efficient utilization of the solvent. The application of various combinations of extraction technologies has proved to exert a synergistic effect or to act as an adjunct. There is a need for proper identification, segregation, and purification of the active ingredients in plant extracts for their efficient utilization in the meat industry, as natural antioxidants. The present review has critically analyzed the conventional and green extraction technologies in extracting bioactive compounds from plant biomass and their utilization in meat as natural antioxidants.

Rana chensinensis Ovum Oil Based on CO2 Supercritical Fluid Extraction: Response Surface Methodology Optimization and Unsaturated Fatty Acid Ingredient Analysis

Rana chensinensis ovum oil (RCOO) is an emerging source of unsaturated fatty acids (UFAs), but it is lacking in green and efficient extraction methods. In this work, using the response surface strategy, we developed a green and efficient CO2 supercritical fluid extraction (CO2-SFE) technology for RCOO. The response surface methodology (RSM), based on the Box-Behnken Design (BBD), was used to investigate the influence of four independent factors (pressure, flow, temperature, and time) on the yield of RCOO in the CO2-SFE process, and UPLC-ESI-Q-TOP-MS and HPLC were used to identify and analyze the principal UFA components of RCOO. According to the BBD response surface model, the optimal CO2-SFE condition of RCOO was pressure 29 MPa, flow 82 L/h, temperature 50 °C, and time 132 min, and the corresponding predicted optimal yield was 13.61%. The actual optimal yield obtained from the model verification was 13.29 ± 0.37%, and the average error with the predicted value was 0.38 ± 0.27%. The six principal UFAs identified in RCOO included eicosapentaenoic acid (EPA), α-linolenic acid (ALA), docosahexaenoic acid (DHA), arachidonic acid (ARA), linoleic acid (LA), and oleic acid (OA), which were important biologically active ingredients in RCOO. Pearson correlation analysis showed that the yield of these UFAs was closely related to the yield of RCOO (the correlation coefficients were greater than 0.9). Therefore, under optimal conditions, the yield of RCOO and principal UFAs always reached the optimal value at the same time. Based on the above results, this work realized the optimization of CO2-SFE green extraction process and the confirmation of principal bioactive ingredients of the extract, which laid a foundation for the green production of RCOO.

Simultaneous extraction and separation of oil, proteins, and glucosinolates from Moringa oleifera seeds

Moringa oleifera is a worldwide cultivated edible and medicinal plant. Its seeds are rich in oil, proteins, and glucosinolates. A practical method was developed to simultaneously extract and separate the three groups of substances from M. oleifera seeds. Smashed seed material was loaded into columns with petroleum ether: ethanol 8:2 (PE-ethanol) and eluted sequentially with 4.8-fold PE-ethanol to extract oil, and 10.8-fold water to extract proteins and glucosinolates. More than 95% of oil, proteins, and glucosinolates were extracted. The extracts were separated automatically into ether (oil) phase and ethanol aqueous phase. The latter was further separated into proteins and glucosinolates by 70% ethanol precipitation. The main glucosinolate was identified by LC-MS as GLC (4-α-rhamnopyranosyloxy-benzyl glucosinolate). After purification, 22.3 g refined oil, 33.0 g proteins, and 5.5 g purified GLC from 100 g M. oleifera seeds were obtained. This study provides a simple and high-efficient method to utilize M. oleifera seeds.

Exploiting the Potential of Moringa oleifera Oil/Polyvinyl Chloride Polymeric Bionanocomposite Film Enriched with Silver Nanoparticles for Antimicrobial Activity

The present study focused on the prospect of fabricating a polymeric naturally extracted Moringa oleifera oil bionanocomposite film enriched with silver nanoparticles for antimicrobial activity. In this study, a standard concentration of Moringa oleifera oil (5-10 wt%) was used to fabricate a polymeric bionanocomposite film using polyvinyl chloride (PVC) enriched with silver nanoparticles. The active constituents of the extracted Moringa oleifera oil were verified using gas chromatography-mass spectrometry. Spectroscopic and microscopic techniques, including scanning electron microscopy, X-ray diffraction, and energy-dispersive X-ray analysis, were employed to characterize and study the surface morphology of the fabricated bionanocomposite film. The antimicrobial activity of the fabricated bionanocomposite film was investigated using different strains of bacteria and fungus. The results revealed well-oriented and excellently dispersed silver nanoparticles in the PVC-Moringa oleifera oil matrix. The bionanocomposite was able to inhibit the growth of Staphylococcus aureus, Escherichia coli, Klebsiella pneumoniae, Salmonella typhi, Pseudomonas aeruginosa, Shigella flexneri, and Candida albicans. The combination of nanoparticles with polymers is opening new routes for engineering fixable composites, which showed antimicrobial properties.

Sono hydrodistillation for isolation of citronella oil: A symbiotic effect of sonication and hydrodistillation towards energy efficiency and environment friendliness

Environmental benign approach for extraction of essential oil was made. An essential oil rich in citronellol, linalool and citronellal was extracted from the leaves of Cymbopogon winterianus using a clean hybrid extraction technique, sono hydrodistillation. Sono hydrodistillation combines ultrasonic waves along with conventional hydrodistillation process to have symbiotic outcomes in terms of process improvement. Significant process parameters such as size of the plant material, extraction time, power, ultrasound amplitude, pulse interval and solid loading were investigated independently to study the effect on yield of oil and composition of oil. The water residue remained after extraction of volatile oil was analyzed using Folin-Ciocalteu method to determine the total phenolic content (TPC) which would help in assessing the residue as a useful by-product. Substantial reduction in time was observed with the inclusion of ultrasound compared to conventional hydrodistillation. Further, to optimize the extraction conditions, observe interactive effects of various parameters and develop mathematical model, response surface methodology was employed. The maximum yield of oil was found to be 4.118% (w/w) at 21 min extraction time, 5 g solid loading, 250 mL water volume, 500 W heating mantle power, 70% ultrasonic amplitude and 10:50 pulse interval. Total phenolic content was 13.84 mg GAE/g DM. The citronella oil was found to be composed of 27.47% of linalool, 11.52% of citronellal, 34.25% citronellol and 11.15% of elemol. Extraction time, solid loading and pulse interval had the significant influence on the yield of oil and total phenolic contents. Microscopic analysis has assisted in envisaging the probable mechanism indicating the role of sonication for rapid extraction. This novel technique was compared with the conventional hydrodistillation to ascertain the impact towards process intensification. Sono hydrodistillation was found to be a greener and cleaner process as energy consumption has been reduced by 40% while carbon footprint has shrunken by 47%.

Recovery of Oil with Unsaturated Fatty Acids and Polyphenols from Chaenomelessinensis (Thouin) Koehne: Process Optimization of Pilot-Scale Subcritical Fluid Assisted Extraction

The potential effects of three modern extraction technologies (cold-pressing, microwaves and subcritical fluids) on the recovery of oil from Chaenomelessinensis (Thouin) Koehne seeds have been evaluated and compared to those of conventional chemical extraction methods (Soxhlet extraction). This oil contains unsaturated fatty acids and polyphenols. Subcritical fluid extraction (SbFE) provided the highest yield—25.79 g oil/100 g dry seeds—of the three methods. Moreover, the fatty acid composition in the oil samples was analysed using gas chromatography–mass spectrometry. This analysis showed that the percentages of monounsaturated (46.61%), and polyunsaturated fatty acids (42.14%), after applying SbFE were higher than those obtained by Soxhlet, cold-pressing or microwave-assisted extraction. In addition, the oil obtained under optimized SbFE conditions (35 min extraction at 35 °C with four extraction cycles), showed significant polyphenol (527.36 mg GAE/kg oil), and flavonoid (15.32 mg RE/kg oil), content, had a good appearance and was of high quality.

Characterization of Acanthosicyos horridus and Citrullus lanatus seed oils: two melon seed oils from Namibia used in food and cosmetics applications

The physicochemical characteristics, fatty acid, tocopherol, stigmasterol, β-sitosterol, and ¹H NMR profiles of Citrullus lanatus and Acanthosicyos horridus melon seed oils were determined and compared among different extraction methods (cold pressing, traditional, and Soxhlet). The oil content was 40.2 ± 3.45 and 37.8 ± 7.26% for C. lanatus and A. horridus, respectively. Significant differences (p < 0.05) were observed among the different extraction methods in the characteristics studied. Physicochemical characteristics of the melon seed oils were saponification value, 180.48-189.86 mg KOH/g oil; iodine value, 108.27-118.62 g I₂/100 g oil; acid value, 0.643-1.63 mg KOH/g oil; peroxide value; 1.69-2.98 mequiv/kg oil; specific gravity, 0.901-0.922; and refractive indices, 1.4676-1.4726. The dominant tocopherol was γ-tocopherol with total tocopherol in the range 27.61-74.39 mg/100 g. The dominant fatty acid was linoleic acid in the range 52.57-56.96%. The favorable oil yield, physicochemical characteristics, tocopherol, and fatty acid composition have the potential to replace or improve major commercial vegetable oils and to be used for various applications in the food industry and nutritive medicines.

Solvent Supercritical Fluid Technologies to Extract Bioactive Compounds from Natural Sources: A Review

Supercritical fluid technologies offer a propitious method for drug discovery from natural sources. Such methods require relatively short processing times, produce extracts with little or no organic co-solvent, and are able to extract bioactive molecules whilst minimising degradation. Supercritical fluid extraction (SFE) provides a range of benefits, as well as offering routes to overcome some of the limitations that exist with the conventional methods of extraction. Unfortunately, SFE-based methods are not without their own shortcomings; two major ones being: (1) the high establishment cost; and (2) the selective solvent nature of CO₂, i.e., that CO₂ only dissolves small non-polar molecules, although this can be viewed as a positive outcome provided bioactive molecules are extracted during solvent-based SFE. This review provides an update of SFE methods for natural products and outlines the main operating parameters for extract recovery. Selected processing considerations are presented regarding supercritical fluids and the development and application of ultrasonic-assisted SFE methods, as well as providing some of the key aspects of SFE scalability.

Supercritical extraction of sunflower oil: A central composite design for extraction variables

Supercritical carbon dioxide (SC-CO2) extraction of sunflower seed for the production of vegetable oil is investigated and compared to conventional methods. The effects of extracting variables, namely pressure, temperatures, particle size, SC-CO2 flow rate and co-solvent, on SC-CO2 extraction are investigated. The maximum yield for sunflower oil is found to be about 54.37 wt%, and is obtained when SC-CO2 extraction is carried out at 80 °C, 400 bar, 0.75 mm particle and 10 g/min solvent flow with 5% co-solvent. A central composite design is used to develop the model and also to predict the optimum conditions. At optimum conditions obtained based on desirability function, 80.54 °C, 345 bar, 1.00 mm, 10.50 g/min and 7.58% ethanol, SC-CO2 extraction has performed and found that extraction yield dropped by 2.88% from the predicted value. Fatty acid composition of SC-CO2 and hexane extracted oil shows negligible difference and found high source of linoleic acid.

Optimization of Purification, Identification and Evaluation of the in Vitro Antitumor Activity of Polyphenols from Pinus Koraiensis Pinecones

In this study, an efficient purification method for the polyphenols of Pinus koraiensis pinecone (PPP) has been developed. AB-8 resin was verified to offer good adsorption and desorption ratio for PPP. Response surface methodology (RSM) indicated that the optimized purification parameters for PPP were 1.70 mg GAE/mL phenolic sample concentration, 22.00 mL sample volume, and 63.00% ethanol concentration. Under these conditions, the experimental purity of PPP was 27.93 ± 0.14% (n = 3), which matched well with the predicted purity of 28.17%. Next, the antiproliferative effects of PPP on seven cancer cell lines, including A375 (human skin melanoma cancer cell line), A549 (human lung cancer cell line), SH-SY5Y (human neuroblastoma cell line), LOVO (human colon cancer stem cell line), MCF-7 (human breast cancer cell line), HeLa (human cervical cancer line), and HT29 (human colon cancer line), were examined by MTT assays. The results indicated that PPP had the highest capacity for inhibiting LOVO cells growth with an EC50 value of 0.317 ± 0.0476 mg/mL. Finally, Ultra-high performance liquid chromatography- tandem mass spectrometry (UPLC-MS) was used to tentatively identify twenty-four peaks in the purified PPP, of which five representative peaks were identified as catechin, methyl quercetin, o-vanillin, luteolin and coronaric acid. Our results demonstrate that Pinus koraiensis pinecone is a readily available source of polyphenols, and the purified PPP could be a promising natural antitumor agent for applications in functional foods.