Development of a novel label-free impedimetric electrochemical sensor based on hydrogel/chitosan for the detection of ochratoxin A

A novel amplification strategy based on target-induced multicomponent nuclease-mediated catalytic hairpin assembly for fluorescent DNA sensor

Ochratoxin A (OTA) is a highly hazardous mycotoxin widely found in food ingredients and processed products. In response to the demand for food safety, there is an urgent need to establish a highly sensitive, reliable, and cost-effective method for the detection of OTA. In this study, a simple, enzyme-free, sensitive cascade amplification fluorescent strategy was developed to detect OTA based on a magnetic separation system-assisted, multicomponent nuclease (MNAzyme) and its induced catalytic hairpin assembly (CHA). The formation of a stable active MNAzyme was induced by the presence of the target, and the MNAzyme specifically cleaved multiple hairpin H1 to produce sDNA fragments. The sDNA could initiate the mismatched CHA cycle, leading to the production of a large number of H2-H3 complexes, with carboxyfluorescein (FAM) moving away from the quench group (BHQ1), and the fluorescent signal being significantly amplified. The constructed fluorescent aptasensor has a good linear range (0.5-100 ng/mL) and detection limit (0.45 ng/mL). The developed sensor was successfully applied to detect OTA in corn flour and black tea samples.

From traditional to modern: Nanotechnology-driven innovation in mycotoxin sensing for Chinese herbal medicines

Mycotoxin contamination in Chinese herbal medicines (CHMs) is a pressing concern that jeopardizes their quality and safety, despite their widespread therapeutic use. Conventional detection methods are often limited by complexity, cost, and sensitivity, particularly in resource-limited settings. This gap in effective and efficient mycotoxin detection necessitates a comprehensive review that explores innovative solutions to enhance the safety and efficacy of CHMs. Advancements in nanomaterials and related advanced sensing techniques have emerged as a beacon of hope. Therefore, this review aims to fill the knowledge gap by providing a comprehensive overview of the latest developments in mycotoxin detection in CHMs, spotlighting the transformative role of nanomaterials and advanced sensing techniques. This review stands out for its in-depth exploration of functional nanomaterials across dimensions and their innovative applications in mycotoxin detection. Its innovation stems from a holistic approach that not only surveys current technologies but also charts a forward-looking path, emphasizing novel nanomaterial development, refined pretreatment, and advanced biosensing for on-site detection. It delves into the integration of nanomaterials with advanced sensing technologies, discussing the advantages and limitations of these approaches. A significant innovation of this review lies in the nuanced integration of nanomaterials with machine learning and artificial intelligence, revealing untapped potential for accuracy enhancement. Through this synthesis of knowledge, we hope to inspire further research and development in this critical area, ensuring the continued safe use of CHMs in traditional medicine practices.

Construction of a Self-Enhanced Electrochemiluminescent Sensor Based on Tandem Signal Amplification and a Self-Luminescent Lanthanide Covalent-Organic Polymer for Ochratoxin A Assay

Ochratoxin A (OTA) is a type of mycotoxin found in various contaminated foods, and it is highly toxic to the livers and kidneys of humans. Herein, we develop a self-enhanced electrochemiluminescent (ECL) sensor based on tandem signal amplification and a self-luminescent europium covalent-organic polymer (Eu-COPTMT-BPA) for OTA assay. Eu-COPTMT-BPA is a self-enhanced ECL emitter that is obtained by using 2,4,6-trimethyl-1,3,5-triazine (TMT) and 2,2'-bipyridine-5,5'-dicarbaldehyde (BPA) as the first and second ligands to form a highly conjugated structure for sensitizing the Eu3+ luminescence. In Eu-COPTMT-BPA, BPA can adjust the energy gap between the triplet ligand and Eu3+excited state to achieve rapid and effective energy transfer for the generation of an enhanced ECL signal. When target OTA is present, it binds with the aptamer segment of the hairpin aptamer probe (HAP) to form a tight structure. The exposed sequence of HAP subsequently binds with the hairpin probe 1/single-stranded DNA 1 (HP1/S1) hybrid to release OTA and trigger (S1). The released S1 can be recognized by a magnetic bead (MB)-capture probe conjugate to trigger a hybridization chain reaction (HCR) between Fc-labeled HP2 and Fc-labeled HP3, leading to the formation of long double-stranded DNA (dsDNA) nanowires on the MB surface and the accumulation of abundant Fc that can quench the ECL intensity of the Eu-COPTMT-BPA/TPrA system. This ECL sensor exhibits good stability, excellent specificity, and high sensitivity, with a detection limit (LOD) of 0.47 fg/mL and a linear range of 1 pg/mL-10 ng/mL, and it can quantitatively measure OTA in wine and coffee.

Study on Highly Sensitive Capacitive Pressure Sensor Based on Silk Fibroin-Lignin Nanoparticles Hydrogel

Silk fibroin (SF) hydrogel has been proven to have excellent applications in the field of pressure sensors, but its sensing performance still needs improvement. A flexible hydrogel prepared from natural macromolecular materials was developed, and lignin nanoparticles (LNPs) were introduced during the preparation of the SF hydrogel. When LNPs account for 3% of SF, the sensing unit of the SF-LNPs3% hydrogel exhibits high stress sensitivity (1.32 kPa-1), fast response speed (<0.1 s), and superior cycle stability (≥8000 cycles). The sensor can detect human motion information, such as finger bending, elbow bending, and pulse signals. When worn at the vocal cord position, it can detect the peak value of the characteristic signal during the wearer speaks. This work demonstrates that the SF-LNPs3% hydrogel has high sensitivity and shows great potential in the field of pressure sensors.

Unlocking the electrochemical performance of glassy carbon electrodes by surface engineered, sustainable chitosan membranes

Chitosan coatings, derived from crustacean shell waste, possess inherent biocompatibility and biodegradability, rendering them suitable for various biomedical and environmental applications, including electrochemical biosensing. Its amine and hydroxyl functional groups offer abundant sites for chemical modifications to boost the charge transfer kinetics and provide excellent adhesion, enabling the construction of robust electrode-coating interfaces for electroanalysis. This study explores the role of electrostatically-driven chemical interactions and crosslinking density originating from different chitosan (Cs) and glutaraldehyde (Ga) concentrations in this aspect. Studying anionic ([Fe(CN)6]3-/4-), neutral (FcDM0/+), and cationic ([Ru(NH3)6]2+/3+) redox probes highlights the influence of Coulombic interactions with chitosan chains containing positively-charged pathways, calculated by DFT analysis. Our study reveals how a proper Ch-to-Ga ratio has a superior influence on the cross-linking efficacy and resultant charge transfer kinetics, which is primarily boosted by up to 20× analyte preconcentration increase, due to electrostatically-driven migration of negatively charged ferrocyanide ions toward positively charged chitosan hydrogel. Notably the surface engineering approach allows for a two-orders of magnitude enhancement in [Fe(CN)6]4- limit of detection, from 0.1 µM for bare GCE down to even 0.2 nM upon an adequate hydrogel modification.

A novel label-free impedance biosensor for KRAS G12C mutations detection based on PET-RAFT and ROP synergistic signal amplification

The KRAS G12C mutations, as crucial biomarkers, are closely associated with non-small cell lung cancer. Here, a novel label-free electrochemical biosensor with synergistic signal amplification of photocell energy transfer-reversible addition fragmentation chain transfer (PET-RAFT) and ring-opening polymerization (ROP) was developed for the first time for sensitive detection of KRAS G12C mutations. Specifically, hairpin DNA (hDNA), which act as biomolecular probe, was self-assembled on Au electrode surface by Au-S bond. 4-cyano-4-[(dodecylsulfanylthiocarbonyl) sulfanyl] pentanoic acid (CDTPA), the chain transfer agent of PET-RAFT reaction, was then attached to hDNA via amide bond. After that, the target DNA (tDNA) was captured on the electrode surface by complementary base pairing with hDNA. Subsequently, large numbers of electro-active monomers N-acryloxysuccinimide (NAS) were successfully grafted to the electrode surface via PET-RAFT reaction, which provided plenty of junction sites for doxorubicin-polycaprolactone (Dox-PCL) synthesized by ROP. Finally, the Dox-PCL was connected to the electrode surface by ester bond, significantly amplifying the electrochemical signal. Under optimized conditions, the biosensor has a wide linear detection range of 0.1 pM to 1 μM, with a detection limit of 86.9 fM. Attribute to its high sensitivity, specificity, reproducibility and stability, this biosensor possesses considerable potential in early diagnosis of disease and biomedical research.

Development and application of hydrogels in pathogenic bacteria detection in foods

Hydrogels are 3D networks of water-swollen hydrophilic polymers. It possesses unique properties (e.g., carrying biorecognition elements and creating a micro-environment) that make it highly suitable for bacteria detection (e.g., expedited and effective bacteria detection) and mitigation of bacterial contamination in specific environments (e.g., food systems). This study first introduces the materials used to create hydrogels for bacteria detection and the mechanisms for detection. We also summarize different hydrogel-based detection methods that rely on external stimuli and biorecognition elements, such as enzymes, temperature, pH, antibodies, and oligonucleotides. Subsequently, a range of widely utilized bacterial detection technologies were discussed where recently hydrogels are being used. These modifications allow for precise, real-time diagnostics across varied food matrices, responding effectively to industry needs for sensitivity, scalability, and portability. After highlighting the utilization of hydrogels and their role in these detection techniques, we outline limitations and advancements in the methods for the detection of foodborne pathogenic bacteria, especially the potential application of hydrogels in the food industry.

A label-free electrochemical sensor based on π-structured bipedal DNA walker-triggered hybridization chain reaction and AuPt NPs/Zr-MOF for OTA detection

BACKGROUND

Ochratoxin A (OTA) is a serious food contaminant, not easily degradable, and capable of causing irreversible damage to the human body. Therefore, it is of great practical significance to establish a sensitive and efficient OTA detection method. The electrochemical aptasensor has a broad development prospect in OTA detection with its advantages of fast response speed and low cost.

RESULTS

Herein, a cascade signal amplification strategy based on AuPt NPs/Zr-MOF and π-structure bipedal DNA walker-triggered hybridization chain reaction (HCR) was designed for the detection of ochratoxin A (OTA). AuPt NPs/Zr-MOF was employed as the electrode modification material, providing a large number of active sites and high conductivity, achieving 1.47 times signal amplification. Interestingly, bipedal DNA walker binds to hairpin 1 (H1) to form the π-structure. Under the activation of Pb2+, one bipedal DNA walker can simultaneously bind and cleave two H1. It exhibits a wide walking range and high recognition efficiency. After H1 is cleaved, the trigger sequence was exposed to trigger HCR and a large amount of methylene blue was loaded on the electrode. Under the optimal conditions, the linear range of the determined OTA is 1 × 10-3-500 ng/mL, and the limit of detection is as low as 0.525 pg/mL.

SIGNIFICANCE

The experimental results demonstrate that the constructed electrochemical aptasensor is a sensitive and efficient platform for OTA monitoring. The applicability in food samples was also confirmed, and the strategy was efficiently selective and reproducible for different analytes. This provides ideas for subsequent food safety testing.

Impedimetric Characterization of NanA Structural Domains Activity on Sialoside-Containing Interfaces

Streptococcus pneumoniae is a pathogenic bacterium that contains the surface-bound neuraminidase, NanA. NanA has two domains that interact with sialosides. It is hard to determine the contribution of each domain separately on catalysis or binding. In this work, we used biochemical methods to obtain the separated domains, applied electrochemical and surface analysis approaches, and determined the catalytic and binding preferences toward a surface-bound library of sialosides. Impedimetric studies on two different surfaces revealed that protein-surface interactions provide a tool for distinguishing the unique contribution of each domain at the interface affecting the substrate preference of the enzyme in different surroundings. We showed that each domain has a sialoside-specific affinity. Furthermore, while the interaction of the sialoside-covered surface with the carbohydrate-binding domain results in an increase in impedance and binding, the catalytic domain adheres to the surface at high concentrations but retains its catalytic activity at low concentrations.

Molecular imprinting electrochemical sensor based on hollow spherical PProDOT-2CH2OH and chitosan-derived carbon materials for highly sensitive detection of chloramphenicol

The misuse of chloramphenicol (CAP) has jeopardized environmental safety. It is critical to create an effective and sensitive CAP detection technique. In this paper, a composite of chitosan (CS)-derived carbon material modified hollow spherical hydroxylated poly(3,4-propylenedioxythiophene) (PProDOT-2CH2OH) was designed, which innovatively used o-phenylenediamine and p-aminobenzoic acid as bi-functional monomers to prepare molecular imprinting polymer (MIP) sensors for highly sensitive analysis and determination of CAP. It was found that the hollow spherical structure of PProDOT-2CH2OH significantly enhanced the rapid electron migration. When combined with the CS-derived carbon material, which has multi-functional sites, it improved the electrical activity and stability of the sensor. It also provided more active centers for the MIP layer to specifically recognize CAP. Therefore, this MIP sensor had a wide linear response (0.0001 ∼ 125 μM), a low limit of detection (LOD, 6.6 pM), excellent selectivity and stability. In addition, studies showed that the sensor has potential practical value. ENVIRONMENTAL IMPLICATION: Chloramphenicol (CAP) is one of the most widely used antibiotics with the highest dosage due to its low price and broad-spectrum antimicrobial properties. Due to its incomplete metabolism in living organisms and its difficulty in degrading in the environment, contamination caused by it can pose a threat to public health. In this study, a novel molecularly imprinted sensor (MIP/PC2C1/GCE) was designed to provide a new idea for rapid and precise removal of CAP by adsorption. The detection of CAP in pharmaceutical, water quality, and food fields was realized.

A DNA tetrahedral scaffolds-based electrochemical biosensor for simultaneous detection of AFB1 and OTA

Herein, a bifunctional electrochemical biosensor based on the DNA tetrahedral scaffolds (TDNs) was proposed, OTA@TDNs and AFB1@TDNs were adopted for electrochemical signal output in response to OTA and AFB1 concentration, simultaneously. In order to increase the conductivity of the biosensor, highly porous gold (HPG) was loaded on electrode surface by pulse electrodeposition. Under optimal conditions, the PFc displayed a linear range with AFB1 concentration between 0.05 ∼ 360 ng·mL-1 with the LOD of 3.5 pg·mL-1. And the PMB selective and sensitive responses to OTA are achieved with a linear range of 0.05 ∼ 420 ng·mL-1 and a LOD of 2.4 pg·mL-1. This biosensor has high sensitivity, selectivity and stability for OTA and AFB1 detection in peanut samples. The approach streamlines the experimental procedure, leading to significantly improve the detection efficiency of mycotoxins. Collectively, this method suggest a novel approach for the detection and monitoring of OTA and AFB1 in food sample.

Establishment of a Dual-Signal Enhanced Fluorescent Aptasensor for Highly Sensitive Detection of Ochratoxin A

A robust and versatile dual-signal enhanced fluorescent aptasensor was developed for ochratoxin A (OTA) detection based on fluorescence resonance energy transfer between 5-carboxyfluorescein (FAM) and Super Green I (SG) fluorophores as the donor and graphene oxide (GO) nanosheet as the acceptor. Abundant SG probes were adsorbed into the FAM-complementary DNA (cDNA)-aptamer double-stranded structure to achieve remarkably enhanced fluorescence responses. Without OTA, the FAM-cDNA-SG conjugates coexisted with GO nanosheets, exhibiting strong fluorescence signals. In the presence of OTA, it was captured by the aptamers to release cDNA-FAM and SG probes, which were adsorbed by GO, leading to OTA-dependent fluorescence quenching. The changed fluorescence intensity was measured for accurate quantitation of OTA. Under optimum conditions, the dual-signal enhanced fluorescent aptasensor realized fascinating sensitivity with a limit of detection of 0.005 ng/mL and a wide concentration range of 0.02-20 ng/mL, as well as high selectivity for OTA over other interfering substances, excellent accuracy with average recoveries of 91.37-116.83% in the fortified malt matrices, and superior reliability and practicability in actual samples. This FAM-cDNA-aptamer-SG/GO nanosheet-based aptasensing platform could be extended to monitor other contaminants or trace molecules in food, environmental, and diagnostic fields by altering the corresponding aptamers.

Hydrogels for Chemical Sensing and Biosensing

The development and synthesis of hydrogels for chemical and biosensing are of great value. Hydrogels can be tailored to its own physical structure, chemical properties, biocompatibility, and sensitivity to external stimuli when being used in a specific environment. Herein, hydrogels and their applications in chemical and biosensing are mainly covered. In particular, it is focused on the manner in which hydrogels serve as sensing materials to a specific analyte. Different types of responsive hydrogels are hence introduced and summarized. Researchers can modify different chemical groups on the skeleton of the hydrogels, which make them as good chemical and biosensing materials. Hydrogels have great application potential for chemical and biosensing in the biomedical field and some emerging fields, such as wearable devices.

Polysaccharide-based hydrogels for medical devices, implants and tissue engineering: A review

Hydrogels are highly biocompatible biomaterials composed of crosslinked three-dimensional networks of hydrophilic polymers. Owing to their natural origin, polysaccharide-based hydrogels (PBHs) possess low toxicity, high biocompatibility and demonstrate in vivo biodegradability, making them great candidates for use in various biomedical devices, implants, and tissue engineering. In addition, many polysaccharides also show additional biological activities such as antimicrobial, anticoagulant, antioxidant, immunomodulatory, hemostatic, and anti-inflammatory, which can provide additional therapeutic benefits. The porous nature of PBHs allows for the immobilization of antibodies, aptamers, enzymes and other molecules on their surface, or within their matrix, potentiating their use in biosensor devices. Specific polysaccharides can be used to produce transparent hydrogels, which have been used widely to fabricate ocular implants. The ability of PBHs to encapsulate drugs and other actives has been utilized for making neural implants and coatings for cardiovascular devices (stents, pacemakers and venous catheters) and urinary catheters. Their high water-absorption capacity has been exploited to make superabsorbent diapers and sanitary napkins. The barrier property and mechanical strength of PBHs has been used to develop gels and films as anti-adhesive formulations for the prevention of post-operative adhesion. Finally, by virtue of their ability to mimic various body tissues, they have been explored as scaffolds and bio-inks for tissue engineering of a wide variety of organs. These applications have been described in detail, in this review.

Recognition-Activated Primer-Mediated Exponential Rolling Circle Amplification for Signal Probe Production and Ultrasensitive Visual Detection of Ochratoxin A with Nucleic Acid Lateral Flow Strips

We proposed a visual strategy for rapid and ultrasensitive detection of ochratoxin A (OTA) by integration of primer-mediated exponential rolling circle amplification (P-ERCA) with a designed nucleic acid lateral flow strip (LFS). The recognition component was preimmobilized in the tube by hybridization between the immobilized functionalized aptamer and complementary ssDNA. Recognition of OTA induces the release of complementary ssDNA from the tube, which will also act as the primer of the designed P-ERCA. Three nicking sites on the template P-ERCA could contribute to the production of enormous signal probes based on the simultaneous amplification-nicking model, which can be visually measured directly with the constructed nucleic acid LFS. Importantly, the nicked signal probe can also act as the trigger of the new-round RCA, achieving exponential growth of signal probes for measurement and signal enhancement. Taking advantage of the extraordinary amplification efficiency of P-ERCA and the simplicity of LFS, this P-ERCA-LFS method demonstrates ultrasensitive detection of OTA with a visual limit of detection as low as 100 fg/mL for qualitative screening and a limit of detection of 35 fg/mL for semiquantitative analysis. This designed strategy could also be utilized as a universal method for detection of other chemical analytes with the replacement of the aptamer for recognition, and the nucleic acid LFS unit could also be a useful protocol for direct ssDNA analysis.

Strategy of functional nucleic acids-mediated isothermal amplification for detection of foodborne microbial contaminants: A review

Foodborne microbial contamination (FMC) is the leading cause of food poisoning and foodborne illness. The foodborne microbial detection methods based on isothermal amplification have high sensitivity and short detection time, and functional nucleic acids (FNAs) could extend the detectable object of isothermal amplification to mycotoxins. Therefore, the strategy of FNAs-mediated isothermal amplification has been emergingly applied in biosensors for foodborne microbial contaminants detection, making biosensors more sensitive with lower cost and less dependent on nanomaterials for signal output. Here, the mechanism of six isothermal amplification technologies and their application in detecting FMC is firstly introduced. Then the strategy of FNAs-mediated isothermal amplification is systematically discussed from perspectives of FNAs' versatility including recognition elements (Aptamer, DNAzyme), programming tools (DNA tweezer, DNA walker and CRISPR-Cas) and signal units (G-quadruplex, FNAs-based nanomaterials). Finally, challenges and prospects are presented in terms of addressing the issue of nonspecific amplification reaction, developing better FNAs-based sensing elements and eliminating food matrix effects.

Immobilization-free electrochemical homogeneous aptasensor for highly sensitive detection of carcinoembryonic antigen by dual amplification strategy

Electrochemical aptasensor has been widely studied, while its practical application is limited by the unavoidable variations of aptamer loading densities and low signal amplification efficiency. To overcome these restrictions, an immobilization-free and label-free electrochemical homogeneous aptasensor was constructed for carcinoembryonic antigen (CEA) assay by combining RecJ_f exonuclease-mediated target cycling strategy and rolling circle amplification technology. In this system, the pre-immobilization of aptamers or other relevant signal elements on the electrode substrate is no longer necessary, thus the electrochemical homogeneous aptasensor shows good versatility on different transducers. Moreover, the whole recognition and signal amplification process are activated instantaneously by a non-professional operation of the solution mixture. This strategy can not only increase the stability (95.1% after 30 days of storage) and reproducibility (2.12% among five independent electrodes), but also further improve the sensitivity (detection limit of fg mL^-1 level) due to the free target recognition and dual signal amplification in the homogeneous solution phase. The proposed immobilization-free electrochemical homogeneous aptasensors on different electrode substrates both achieve satisfactory results in actual sample tests, which has the potential for commercial applications and the establishment of other target platforms in the future.

A G-triplex and G-quadruplex concatemer-enhanced fluorescence probe coupled with hybridization chain reaction for ultrasensitive aptasensing of ochratoxin A

Ochratoxin A (OTA), a typical mycotoxin contaminant found in various agricultural products and foods, poses a serious threat to human health. In this study, an aptasensor based on a novel fluorescence probe comprising a G-rich DNA sequence (G43) and thioflavin T (ThT) was designed via hybridization chain reaction (HCR) for the ultrasensitive detection of OTA. G43 is a concatemer of G-quadruplex and G-triplex (a G-quadruplex-like structure with one G-quartet removed), which can drastically enhance the fluorescence intensity of ThT. For this strategy to work, the OTA aptamer is pro-locked in a hairpin structure, denoted "hairpin-locked aptamer" (HL-Apt). OTA binds to HL-Apt, opens the hairpin structure, releases the trigger sequence, and initiates the HCR reaction to form a long DNA duplex and numerous side chains. The side chains combine entirely with the complementary DNA and liberate the pro-locked G43 DNA, dramatically enhancing the intensity of the ThT fluorescence signal. The fluorescence intensity correlates linearly with the OTA concentration between 0.02 and 2.00 ng mL^-1, and the method has a detection limit of 0.008 ng mL^-1. The developed aptasensor was used to detect OTA in foodstuffs with satisfactory results.

Exogenous interference and autofluorescence-free ratiometric aptasensor for detection of OTA based on dual-colored persistent luminescence nanoparticles

Accurate and sensitive detection of ochratoxin A (OTA) is highly necessary due to its high carcinogenicity, teratogenicity and mutagenicity. Herein, we reported an exogenous interference and autofluorescence-free ratiometric aptasensor based on dual-colored persistent luminescent nanoparticles for precise detection of OTA. Green-emitting ZnGeO:Mn bonded with OTA aptamer and BHQ1-modified complementary base was acted as detection and specific recognition probe (ZGM@BHQ1). Quaternary ammonium modified ZnGaGeO:Cr with red emission was employed as reference probe and further bonded to ZGM@BHQ1 through electrostatic interaction to construct the ratiometric aptasensor. The developed ratiometric aptasensor was free from real-time excitation, external interference and autofluorescence and gave low detection limit of 3.4 pg mL^-1, wide linearity in the range of 0.01-50 ng mL^-1 and high precision of 3.1 % (11 replicate determinations, at 1 ng mL^-1 level). The applicability of the aptasensor was successfully demonstrated by analyzing OTA in in grain samples with recoveries of 97.6 %-105.2 %.

Coordinating Etching Inspired Synthesis of Fe(OH)3 Nanocages as Mimetic Peroxidase for Fluorescent and Colorimetric Self-Tuning Detection of Ochratoxin A

The development of multifunctional biomimetic nanozymes with high catalytic activity and sensitive response is rapidly advancing. The hollow nanostructures, including metal hydroxides, metal-organic frameworks, and metallic oxides, possess excellent loading capacity and a high surface area-to-mass ratio. This characteristic allows for the exposure of more active sites and reaction channels, resulting in enhanced catalytic activity of nanozymes. In this work, based on the coordinating etching principle, a facile template-assisted strategy for synthesizing Fe(OH)₃ nanocages by using Cu₂O nanocubes as the precursors was proposed. The unique three-dimensional structure of Fe(OH)₃ nanocages endows it with excellent catalytic activity. Herein, in the light of Fe(OH)₃-induced biomimetic nanozyme catalyzed reactions, a self-tuning dual-mode fluorescence and colorimetric immunoassay was successfully constructed for ochratoxin A (OTA) detection. For the colorimetric signal, 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) diammonium salt (ABTS) can be oxidized by Fe(OH)₃ nanocages to form a color response that can be preliminarily identified by the human eye. For the fluorescence signal, the fluorescence intensity of 4-chloro-1-naphthol (4-CN) can be quantitatively quenched by the valence transition of Ferric ion in Fe(OH)₃ nanocages. Due to the significant self-calibration, the performance of the self-tuning strategy for OTA detection was substantially enhanced. Under the optimized conditions, the developed dual-mode platform accomplishes a wide range of 1 ng/L to 5 μg/L with a detection limit of 0.68 ng/L (S/N = 3). This work not only develops a facile strategy for the synthesis of highly active peroxidase-like nanozyme but also achieves promising sensing platform for OTA detection in actual samples.

Ultrasensitive detection of CA125 based on a triple signal amplification strategy with a huge number of loaded probes via exonuclease cyclic cleavage, rolling cyclic amplification and strand self-growth

A novel electrochemiluminescence (ECL) aptamer biosensor with high sensitivity and selectivity for the detection of tumor biomarker carbohydrate antigen 125 (CA125) was constructed, and a strategy of triple amplification of signals was proposed using an exonuclease cyclic cleavage aptamer, combined with rolling ring amplification technologies, generating multi-branched dendritic double-stranded DNA to load a large number of probes through "strand self-growth". The double-stranded DNA, which is abbreviated as CP/CA dsDNA, formed by hybridizing the single strand of capture DNA (CP DNA) with the single strand DNA of the CA125 aptamer (CA Apt) was modified on Fe₃O₄@Au. When CA125 was added, CP/CA dsDNA was unwound, and CA125 specifically combined with CA Apt to form a protein-aptamer complex, leaving only CP DNA on the surface of Fe₃O₄@Au. RecJ_f exonuclease cleaved the aptamer in the protein-aptamer complex and released CA125, which recombined with other CA125 aptamers, to form a cycle that produces more CP DNA on Fe₃O₄@Au. Three ssDNA (H1, H2, and H3) were introduced and hybridized with CP DNA to form a dsDNA with a "+" configuration structure. Then phi29 DNA polymerase, T4 DNA ligase, deoxy-ribonucleoside triphosphate (dNTP) and padlock probes were added to form a large number of complementary strands of padlock probes (CS padlock probes) by rolling cyclic amplification. CS padlock probes were linked to the "+" type dsDNA; then ssDNA H4 was added and hybridized with the CS padlock probe to form multi-branched dendritic dsDNA. A large number of tris(2,2'-bipyridyl)ruthenium(II) probes were embedded in the double strands, resulting in an extremely strong ECL signal in the presence of the co-reactant tri-n-propylamine (TPA). There is a linear relationship between the ECL signals and CA125 concentrations in the range of 1.0 × 10^-15-1.0 × 10^-8 mg mL^-1, and the detection limit was 2.38 × 10^-16 mg mL^-1. It has been used for the determination of CA125 in serum samples.

Rapid and inexpensive voltammetric detection of ochratoxin A in wheat matrices

Produced as toxic metabolites by fungi, mycotoxins, such as ochratoxin A (OTA), contaminate grain and animal feed and cause great economic losses. Herein, we report the fabrication of an electrochemical sensor consisting of an inexpensive and label-free carbon black-graphite paste electrode (CB-G-CPE), which was fully optimized to detect OTA in durum wheat matrices using differential pulse voltammetry (DPV). The effect of carbon paste composition, electrolyte pH and DPV parameters were studied to determine the optimum conditions for the electroanalytical determination of OTA. Full factorial and central composite experimental designs (FFD and CCD) were used to optimize DPV parameters, namely pulse width, pulse height, step height and step time. The developed electrochemical sensor successfully detected OTA with detection and quantification limits equal to 57.2 nM (0.023 µg mL^-1) and 190.6 nM (0.077 µg mL^-1), respectively. The accuracy and precision of the presented CB-G-CPE was used to successfully quantify OTA in real wheat matrices. This study presents an inexpensive and user-friendly method with potential applications in grain quality control.

Biomedical applications of aptamer-modified chitosan nanomaterials: An updated review

Among polysaccharides of environmental and economic interest, chitosan (CS) is receiving much attention, particularly in the food and biotechnology industries to encapsulate active food ingredients and immobilize enzymes. CS nanoparticles (CS NPs) combine the intrinsic beneficial properties of both natural polymers and nanoscale particles such as quantum size effect, biocompatibility, biodegradability, and ease of modification, and have great potential for bioimaging, drug delivery, and biosensing applications. Aptamers are single-stranded oligonucleotides that can fold into predetermined structures and bind to the corresponding biomolecules. They are mainly used as targeting ligands in biosensors, disease diagnostic kits and treatment strategies. They can deliver contrast agents and drugs into cancer cells and tissues, control microorganism growth and precisely target pathogens. Aptamer-conjugated CS NPs can significantly improve the efficacy of conventional therapies, minimize their side effects on normal tissues, and overcome the enhanced permeability retention (EPR) effect. Further, aptamer-conjugated carbohydrate-based nanobiopolymers have shown excellent antibacterial and antiviral properties and can be used to develop novel biosensors for the efficient detection of antibiotics, toxins, and other biomolecules. This updated review aims to provide a comprehensive overview of the bioapplications of aptamer-conjugated CS NPs used as innovative diagnostic and therapeutic platforms, their limitations, and potential future directions.

Biocatalysis versus Molecular Recognition in Sialoside-Selective Neuraminidase Biosensing

Sialic acid recognition and hydrolysis are essential parts of cellular function and pathogen infectivity. Neuraminidases are enzymes that detach sialic acid from sialosides, and their inhibition is a prime target for viral infection treatment. The connectivity and type of sialic acid influence the recognition and hydrolysis activity of the many different neuraminidases. The common strategies to evaluate neuraminidase activity, recognition, and inhibition rely on extensive labeling and require a large amount of sialylated glycans. The above limitations make the effort of finding viral inhibitors extremely difficult. We used synthetic sialylated glycans and developed a label-free electrochemical method to show that sialoside structural features lead to selective neuraminidase biosensing. We compared Neu5Ac to Neu5Gc sialosides to evaluate the organism-dependent neuraminidase selectivity-sensitivity relationship. We demonstrated that the type of surface and the glycan monolayer density direct the response to either binding or enzymatic activity. We proved that while the hydrophobic glassy carbon surface increases the interaction with the enzyme hydrophobic interface, the negatively charged interface of the lipoic acid monolayer on gold repels the protein and enables biocatalysis. We showed that the sialoside monolayers can serve as tools to evaluate the inhibition of neuraminidases both by biocatalysis and molecular recognition.

Sensitive and selective DNA detecting electrochemical sensor via double cleaving CRISPR Cas12a and dual polymerization on hyperbranched rolling circle amplification

Electrochemical sensors are widely used for nucleic acid detection. However, they exhibit low sensitivity and specificity. To overcome these limitations, DNA amplification method is necessary. In this study, we introduced CRISPR (Clustered regularly interspaced short palindromic repeats) Cas12a-dependent hyperbranched rolling circle amplification (HRCA) into an electrochemical sensor platform. By resolving the existing false-positive issue of HRCA, CRISPR Cas12a determines the real positive amplification that able to enhance its sensitivity for extremely low concentrations of nucleic acids and specificity for single-point mutations. In detail, CRISPR Cas12a, which activates the nucleic acid amplification reaction, was used for both trans and cis cleavage for the first time. Finally, selectively amplified DNA was detected using a screen-printed electrode. Using the change in surface coverage by DNA, the electrochemical sensor detected a decrease in the redox signal. In summary, combining a novel DNA amplification method and electrochemical sensor platform, our proposed method compensates for the shortcomings of existing RCA and hyperbranched RCA, secures a high sensitivity of 10 aM, and overcomes false-positivity problems. Moreover, such creative applications of CRISPR Cas12a may lead to the expansion of its applications to other nucleic acid amplification methods.

Recent Advances in Electrochemical Sensors for Mycotoxin Detection in Food

Mycotoxins pose a grave global threat to human life and health by contaminating food and feed and cause enormous losses in healthcare and trading. Trace mycotoxin concentrations and diverse matrices in food make identification and measurement challenges, necessitating highly specific and sensitive detection methods. Electrochemical (EC) sensors are characterized by simple operation, outstanding sensitivity, low cost, and facile miniaturization and have become a promising strategy for addressing specificity and sensitivity in detection. Recent studies on EC sensors for mycotoxin detection for food safety are reviewed here. First, we summarize the fabrication of EC sensors and techniques with enhanced specificity and sensitivity. Then, we review state‐of‐the‐art EC sensors for detecting major mycotoxins. Challenges and opportunities for this technology are further discussed. Finally, in‐depth information is provided on using EC sensors to detect mycotoxins for food safety, as well as the development of EC sensors for academic study and practical application.

Chitosan-Based Hydrogels for Bioelectronic Sensing: Recent Advances and Applications in Biomedicine and Food Safety

Due to the lack of efficient bioelectronic interfaces, the communication between biology and electronics has become a great challenge, especially in constructing bioelectronic sensing. As natural polysaccharide biomaterials, chitosan-based hydrogels exhibit the advantages of flexibility, biocompatibility, mechanical tunability, and stimuli sensitivity, and could serve as an excellent interface for bioelectronic sensors. Based on the fabrication approaches, interaction mechanisms, and bioelectronic communication modalities, this review divided chitosan-based hydrogels into four types, including electrode-based hydrogels, conductive materials conjugated hydrogels, ionically conductive hydrogels, and redox-based hydrogels. To introduce the enhanced performance of bioelectronic sensors, as a complementary alternative, the incorporation of nanoparticles and redox species in chitosan-based hydrogels was discussed. In addition, the multifunctional properties of chitosan-based composite hydrogels enable their applications in biomedicine (e.g., smart skin patches, wood healing, disease diagnosis) and food safety (e.g., electrochemical sensing, smart sensing, artificial bioelectronic tongue, fluorescence sensors, surface-enhanced Raman scattering). We believe that this review will shed light on the future development of chitosan-based biosensing hydrogels for micro-implantable devices and human-machine interactions, as well as potential applications in medicine, food, agriculture, and other fields.

Advances in the Translation of Electrochemical Hydrogel-Based Sensors

Novel biomaterials for bio- and chemical sensing applications have gained considerable traction in the diagnostic community with rising trends of using biocompatible and lowly cytotoxic material. Hydrogel-based electrochemical sensors have become a promising candidate for their swellable, nano-/microporous, and aqueous 3D structures capable of immobilizing catalytic enzymes, electroactive species, whole cells, and complex tissue models, while maintaining tunable mechanical properties in wearable and implantable applications. With advances in highly controllable fabrication and processability of these novel biomaterials, the possibility of bio-nanocomposite hydrogel-based electrochemical sensing presents a paradigm shift in the development of biocompatible, "smart," and sensitive health monitoring point-of-care devices. Here, recent advances in electrochemical hydrogels for the detection of biomarkers in vitro, in situ, and in vivo are briefly reviewed to demonstrate their applicability in ideal conditions, in complex cellular environments, and in live animal models, respectively, to provide a comprehensive assessment of whether these biomaterials are ready for point-of-care translation and biointegration. Sensors based on conductive and nonconductive polymers are presented, with highlights of nano-/microstructured electrodes that provide enhanced sensitivity and selectivity in biocompatible matrices. An outlook on current challenges that shall be addressed for the realization of truly continuous real-time sensing platforms is also presented.

Electrochemiluminescence Aptasensor Based on Gd(OH)3 Nanocrystalline for Ochratoxin A Detection in Food Samples

In the present study, the electrochemiluminescence (ECL) properties of Gd(OH)₃ nanocrystals with K₂S₂O₈ as the cathode coreactant were studied for the first time. Based on the prominent ECL behavior of this material and the excellent specificity of the aptamer technique, an ECL aptasensor for the detection of ochratoxin A (OTA) was formulated successfully. Over an OTA concentration range of 0.01 pg mL^-1 to 10 ng mL^-1, the change in the ECL signal was highly linear with the OTA concentration, and the limit of detection (LOD) was 0.0027 pg mL^-1. Finally, the ECL aptasensor was further used to detect OTA in real samples (grapes and corn) and satisfactory results were obtained, which indicated that the built method is expected to be applied in food detection.

Recent Progress in Aptamer-Functionalized Metal-Organic Frameworks-Based Optical and Electrochemical Sensors for Detection of Mycotoxins

Mycotoxin contamination in foodstuffs and agricultural products has posed a serious hazard to human health and raised international concern. The progress of cost-effective, facile, rapid and reliable analytical tools for mycotoxin determination is in urgent need. In this regard, the potential utility of metal-organic frameworks (MOFs) as a class of crystalline porous materials has sparked immense attention due to their large specific surface area, adjustable pore size, nanoscale framework structure and good chemical stability. The amalgamation of MOFs with high-affinity aptamers has resulted in the progress of advanced aptasensing methods for clinical and food/water safety diagnosis. Aptamers have many advantages over classical approaches as exceptional molecular recognition constituents for versatile bioassays tools. The excellent sensitivity and selectivity of the MOF-aptamer biocomposite nominate them as efficient lab-on-chip tools for portable, label-free, cost-effective and real-time screening of mycotoxins. Current breakthroughs in the concept, progress and biosensing applications of aptamer functionalized MOFs-derived electrochemical and optical sensors for mycotoxins have been discussed in this study. We first highlighted an overview part, which provides some insights into the functionalization mechanisms of MOFs with aptamers, offering a foundation to create MOFs-based aptasensors. Then, we discuss various strategies to design high-performance MOFs-based aptamer scaffolds, which serve as either signal nanoprobe carriers or signal nanoprobes and their applications. We perceived that applications of optical aptamers are in their infancy in comparison with electrochemical MOFs-derived aptasensors. Finally, current challenges and prospective trends of MOFs-aptamer sensors are discussed.

A Novel Fluorescent Aptasensor Based on Real-Time Fluorescence and Strand Displacement Amplification for the Detection of Ochratoxin A

It is urgently necessary to develop convenient, reliable, ultrasensitive and specific methods of ochratoxin A determination in food safety owing to its high toxicity. In the present study, an ultrasensitive and labeled-free fluorescent aptamer sensor combining real-time fluorescence with strand displacement amplification (SDA) was fabricated for the determination of OTA. In the presence of OTA, the OTA–aptamer combines with OTA, thus opening hairpins. Then, SDA primers specifically bind to the hairpin stem, which is used for subsequent amplification as a template. SDA amplification is initiated under the action of Bst DNA polymerase and nicking endonuclease. The amplified products (ssDNA) are dyed with SYBR Green II and detected with real-time fluorescence. The method has good linearity in the range of 0.01–50 ng mL⁻¹, with the lowest limit of detection of 0.01 ng mL⁻¹. Additionally, the fluorescent aptamer sensor shows outstanding specificity and reproducibility. Furthermore, the sensor shows excellent analytical performance in the artificial labeled detection of wheat and oat samples, with a recovery rate of 96.1~100%. The results suggest that the developed sensor has a promising potential application for the ultrasensitive detection of contaminants in food.

An ultra-sensitive dual-responsive aptasensor with combination of liquid crystal and intercalating dye molecules: A food toxin case study

Herein, a label-free aptasensor was designed through forming a double-stranded DNA skeleton on the glass substrate for ultrasensitive quantification of ochratoxin A (OTA) as a case study. The function fundament of the dual-responsive aptasensor was the perturbation of the vertical alignment of the liquid crystals (LCs) and intercalation of the SYBR Green I (SGI) dye molecules between the base pairs of the double-stranded DNA structure. The presence of OTA decomposed the double-stranded structure of DNA by releasing the OTA-specific aptamer from the sensing platform that induced an apparent alteration of the optical and fluorescent responses. The aptasensor specifically detected the ultra-low levels of OTA as 47.0E-9 pM (0.047 aM) and 34.0E-3 pM (34 fM) based on the polarized and fluorescent responses, respectively. The aptasensor monitored OTA in the coffee and grape drink samples. The aptasensor provides promising insight for manufacturing real-time, cost-effective, and portable sensing devices for food control usage.

Simple and programmed three-dimensional DNA tweezer for simultaneous one-step detection of ochratoxin A and zearalenone

Three-dimensional (TD) deoxyribonucleic acid (DNA) tweezers were programmed for one-step identification and detection of ochratoxin A (OTA) and zearalenone (ZEN). The unfolding of the TD-DNA tweezers by aptamers specific to these two mycotoxins "turned" the fluorescent signals "on." The bonding of the aptamers to their corresponding targets in OTA and ZEN "turned" the fluorescent signals and the DNA tweezers "off." The detection limit of the TD-DNA tweezers for OTA and ZEN was 0.032 and 0.037 ng mL^-1, respectively. The feasibility of this method was tested using two samples. Detection via this method increased the recovery of OTA and ZEN from 95.8% to 110.2%. Spike recovery and certified food products were used to detect applicability in actual situations. Analyte detection in complex samples using TD-DNA tweezers is rapid, as the process involves a single operational step. This proposed design has considerable potential for application in mycotoxin detection.

Century Impact of Macromolecules for Advances of Sensing Sciences

Impact of macro molecular theory on the progress of sensing sciences and technology has been presented in the light of materials developments, advances in physical and chemical properties. The chronological advances in the properties of macromolecules have significantly improved the sensing performances towards gases, heavy metals, biomolecules, hydrocarbon, and energetic compounds in terms of unexplored sensing parameters, durability, and working lifetime. In this review article, efforts have been made to correlate the advances in structure and interactivity of macro-molecules with their sensing behavior and working performances. The significant findings on the macromolecules towards advancing the sensing sciences are highlighted with the suitable illustration and schemes to establish it as a potential “microanalytical technique” along with existing challenges.

Construction of a fluorescence biosensor for ochratoxin A based on magnetic beads and exonuclease III-assisted DNA cycling signal amplification

Specific and sensitive detection of hazardous mycotoxins in agricultural crops is one of the most important goals of food safety. A fluorescence biosensor for sensitive detection of ochratoxin A (OTA) was constructed via magnetic beads and the exonuclease III (Exo III)-assisted trigger DNA circle amplification approach. Exo III-assisted trigger DNA circle amplification can be utilized as an effective strategy for the sensitive detection of OTA. The employment of streptavidin labeled magnetic beads offers a manner for the accumulation and separation of the hairpin signal probe sDNA-FAM in solution. After target specific recognition, the aptamers combined with OTA were released and the remaining block DNA (bDNA) probes captured the signal probes on magnetic bead modified fluorophores. Subsequently, the enzyme digestion reaction leads to the fluorophore free solution. Exo III-assisted DNA circle amplification contributed to the high sensitivity of the presented OTA fluorescence aptasensor. The experimental results demonstrate that the aptasensor is sensitive with the limit of detection as low as 0.28 ng mL^-1 for OTA, which was lower than that of the proposed aptasensors reported by the other literature on fluorescence methods. Additionally, the developed aptasensor with the diverse aptamer sequence shows promising potential applications in food monitoring.

Simple Design Concept for Dual-Channel Detection of Ochratoxin A Based on Bifunctional Metal-Organic Framework

A simple fluorescence and electrochemical dual-channel biosensor based on bifunctional Zr(IV)-based metal-organic framework (Zr-MOF) was proposed to detect Ochratoxin A (OTA). The bifunctional Zr-MOF, with photoluminescence properties and enormous electroactive ligands, was exploited to load OTA-specific aptamers for designing signal probes, greatly simplifying the probe-fabrication process and improving sensing reliability. Upon specific recognition of aptamer toward OTA, the anchored probe was released from the sensing interface into the reaction solution. In this circumstance, the increased amount of the signal probe in reaction solution led to an enhanced fluorescence response, while the decreased amount of the signal probe on the sensing interface resulted in a diminished electrochemical response. According to the dual-channel signal change with increasing OTA concentration, the visual fluorescence strategy was established for intuitive OTA detection, and meanwhile, sensitive electrochemical assay with a detection limit of 0.024 pg/mL was also achieved with the help of one-step electrodeposition as a sensing platform. Moreover, the proposed dual-channel assay has been successfully applied to determine OTA levels in corn samples with rapid response, superior accuracy, and high anti-interference capability, providing a promising method for food safety monitoring.

A DNA tetrahedral nanomaterial-based dual-signal ratiometric electrochemical aptasensor for the detection of ochratoxin A in corn kernel samples

Ochratoxin A (OTA) is a highly toxic food contaminant and is harmful to human beings.

A CdSe@CdS quantum dots based electrochemiluminescence aptasensor for sensitive detection of ochratoxin A

In this work, a CdSe@CdS quantum dots (QDs) based label-free electrochemiluminescence (ECL) aptasensor was developed for the specific and sensitive detection of ochratoxin A (OTA). Chitosan (CHI) could immobilize abundant QDs on the surface of an Au electrode as the luminescent nanomaterials. Glutaraldehyde was used as the crosslinking agent for coupling a large number of OTA aptamers. Thanks to the excellent stability, good biocompatibility, and strong ECL intensity of CdSe@CdS QDs, as well as the quick reactions of the generated SO₄•- in the electrolyte, strong ECL signals were measured. Because of the specific recognition of aptamer toward OTA, the reduced ECL signals caused by OTA in the samples were recorded for quantify the content of OTA. After optimizing a series of crucial conditions, the ECL aptasensor displayed superior sensitivity for OTA with a detection limit of 0.89 ng/mL and a wide linear concentration range of 1-100 ng/mL. The practicability and viability were verified through the rapid and facile analysis of OTA in real Lily and Rhubarb samples with recovery rates (n = 3) of 98.1-105.6% and 97.3-101.5%, respectively. The newly-developed QDs-based ECL aptasensor provided a new universal analytical tool for more mycotoxins in safety assessment of foods and feeds, environmental monitoring, and clinical diagnostics.

Paper-based analytical devices for virus detection: Recent strategies for current and future pandemics

The importance of user-friendly, inexpensive, sensitive, and selective detection of viruses has been highlighted again due to the recent Coronavirus disease 2019 (COVID-19) pandemic. Among the analytical tools, paper-based devices (PADs) have become a leading alternative for point-of-care (POC) testing. In this review, we discuss the recent development strategies and applications in nucleic acid-based, antibody/antigen-based and other affinity-based PADs using optical and electrochemical detection methods for sensing viruses. In addition, advantages and drawbacks of presented PADs are identified. Current state and insights towards future perspectives are presented regarding developing POC diagnosis platform for COVID-19. This review considers state-of-the-art technologies for further development and improvement in PADs performance for virus detection.

Recent Advances in Electrochemical Chitosan-Based Chemosensors and Biosensors: Applications in Food Safety

Chitosan is a biopolymer derived from chitin. It is a non-toxic, biocompatible, bioactive, and biodegradable polymer. Due to its properties, chitosan has found applications in several and different fields such as agriculture, food industry, medicine, paper fabrication, textile industry, and water treatment. In addition to these properties, chitosan has a good film-forming ability which allows it to be widely used for the development of sensors and biosensors. This review is focused on the use of chitosan for the formulation of electrochemical chemosensors. It also aims to provide an overview of the advantages of using chitosan as an immobilization platform for biomolecules by highlighting its applications in electrochemical biosensors. Finally, applications of chitosan-based electrochemical chemosensors and biosensors in food safety are illustrated.

Emerging electrochemical sensing and biosensing approaches for detection of Fumonisins in food samples

Fumonisins (FBs) can be found extensively in feedstuffs, foodstuffs, and crops. The consumption of the fumonisin-contaminated corn can result in esophageal cancer. In addition, the secondary metabolites of fungi termed mycotoxins may have some adverse effects on animals and humans such as estrogenicity, immunotoxicity, teratogenicity, mutagenicity, and carcinogenicity. Hence, developing sensitivity techniques for mycotoxins determination is of great importance. This paper reports the latest developments of nanomaterial-based electrochemical biosensing, apta-sensing, sensing, and immunosensing analyses to detect fumonisins. A concise study of the occurrence, legislations, toxicity, and distribution of FBs in levels monitoring was done. The techniques, different detection matrices, and approaches to highly selective and sensitive sensing methods were reviewed. The review also summarizes the salient features and the necessity of biosensing assessments in FBs detection, and diverse immobilization techniques. Furthermore, this review defined the performance of various electrochemical sensors using different detection elements couples with nanomaterials fabricated applying different detection elements coupled with nanomaterials (metal oxide nanoparticles (NPs), metal NPs, CNT, and graphene), the factors limiting progress, and the upcoming tasks in successful aptasensor fabrication with the functionalized nanomaterials.