Reconsidering conventional and innovative methods for pectin extraction from fruit and vegetable waste: Targeting rhamnogalacturonan I

Citrus endogenous components as prebiotics: Advances in extraction, digestion, mechanisms, and delivery

The large number of by-products during the processing of citrus fruits exert significant pressure on the environment. Citrus by-products contain a variety of bioactive compounds that promote gut health and maintain microbial homeostasis. Therefore, recycling and reuse of these by-products is considered an excellent way to reduce environmental pressure. The purification and characterization methods of bioactive compounds (such as pectin, dietary fiber, polyphenols, essential oils, and limonin) extracted from citrus by-products in recent years are summarised. Subsequently, we summarize the digestive behavior (digestion, absorption, metabolism, and excretion) of these components, focusing on the mechanisms of action through which they exert prebiotic activity. This highlights the interactions between citrus by-product bioactives and gut microbiota, as well as the health effects on the host gut. Additionally, we provide a brief overview of the delivery systems for the active ingredients based on pectin from citrus sources. The results show that extraction methods can significantly affect the composition and structure of citrus by-products, which in turn affects digestive properties and eventually leads to differences in prebiotic activity. Notably, gut microbiota plays a key role in the metabolism and bioactivity of citrus actives. Besides, the innovative embedding methods can markedly enhance their prebiotic potential. Therefore, a comprehensive understanding of the relationship between the extraction, structure, and prebiotic activity of citrus by-products, as well as their delivery methods, is essential to advancing the use of citrus by-products in human health.

Extraction of pectin from watermelon rinds using sequential ultrasound-microwave technique: Optimization using RSM and ANN modeling and characterization

This study aimed to optimize pectin extraction from watermelon (Citrullus lanatus) rind using sequential ultrasound-microwave assisted extraction (UMAE) with artificial neural network (ANN) and response surface methodology (RSM). The effects of pH, sonication time, microwave power, and irradiation time on pectin yield were evaluated. The ANN model showed higher precision in predicting yield compared to the RSM model. The optimal yield was 32.11 % under the conditions of pH 2.01, sonication time 54.23 min, microwave power 900 watts, and irradiation time 6.34 min. This study evaluated the effects of different extraction techniques, including ultrasound-assisted extraction (UAE), microwave-assisted extraction (MAE), and microwave-ultrasound-assisted extraction (MUAE), on pectin yield and their physicochemical properties under optimal UMAE conditions. The highest pectin yield was achieved with UMAE, followed by MUAE, MAE, and UAE. The Fourier transform infrared spectroscopy (FTIR) analysis confirmed the presence of homogalacturonan, galacturonic acid backbone, and methyl esters in the extracted pectin. The viscosity study revealed that the pectin solution showed pseudoplastic behavior at 0.2 % w/v. All extracted pectin in different methods had high-methoxy content ranging from 7.68 ± 0.56 % to 11.96 ± 1.29 % and a degree of esterification between 56.55 ± 0.68 % and 63.43 ± 1.54 %. However, UMAE showed significantly lower energy consumption and CO2 emissions, suggesting it as a sustainable approach for pectin extraction from watermelon rind.

Effects of aging on the fine structure, chain conformation, and morphology of Chenpi polysaccharides

The aging process endows Chenpi (Pericarpium Citri Reticulatae) with unique value and efficacy. This study investigated the dynamic changes in the fine structure, chain conformation, and morphology of water-soluble polysaccharides from Chenpi over time. In the initial storage period of Chenpi (1 year), Chenpi polysaccharides (CP) exhibited a triple-helical structure, with chains entangled and aggregated into rough spherical conformations. Galacturonic acid (GalA, 47.78 mol%) was the predominant monosaccharide. As aging progressed, the homogalacturonan (HG) regions gradually degraded, leading to decreases in molecular sizes (particle size, Mw, Mn, and Rg), a reduction in the degree of esterification, and a weakening of the semicrystalline structure. Consequently, arabinose (Ara) emerged as the main monosaccharide (41.38 mol%). Neutral sugars continuously enriched the rhamnogalacturonan (RG-I) side chains, forming highly branched single molecules that curled into spherical shapes. By 15 years, CP were fully degraded, adopting a compact molecular conformation with the triple-helix structure disappearing and sizes uniformly below 20 nm. However, AFM results indicated aggregation phenomena in 15-year CP. Additionally, CP viscosity decreased while thermal stability improved, reflecting the natural structural transformation of CP. This study provides scientific evidence supporting the application of Chenpi in the food and pharmaceutical industries.

Passion fruit peel-derived low-methoxyl pectin: De-esterification methods and application as a fat substitute in set yogurt

Passion fruit pectin, originally high methoxyl pectin, undergoes substantial conversion into low methoxyl pectin (LMP) through de-esterification. This de-esterification is significance for reducing the application of sugar in food, as calcium ions can replace excessive sugar during gel formation. In this study, LMPs derived from passion fruit pectin were prepared using four methods: low-temperature alkali, room temperature alkali, enzymatic, and dielectric barrier discharge plasma (DBD)-assisted enzyme (DBDE). The de-esterification conditions were optimized, leading to the selection of LMPs with a degree of esterification for the analysis of molecular weight, monosaccharide composition, and gel properties. The results revealed significant differences in the structure and properties of LMPs depending on the de-esterification method applied. The galacturonic acid content of LMPs significantly increased, with LMP from DBDE (LMP-DBDE) exhibiting the highest increase at 47.81 %. Additionally, the molecular weights of LMPs significantly decreased, with LMP-DBDE showing the smallest decrease. LMP-DBDE demonstrated higher apparent viscosity, thermal stability, and gel properties, facilitating the formation of gels. After 21 days of storage, 0.40 % LMP-DBDE yogurt showed no whey separation, significantly extending its shelf life. Therefore, LMP-DBDE exhibits potential as a fat substitute, combining the advantages of LMP with enhanced water-holding capacity, and presenting promising applications in low-fat dairy products.

Structural characterization of rhamnogalacturonan-I purified from Curcuma longa and its anti-lung cancer efficacy via immunostimulation

In this study, we investigated the structural characteristics, immunostimulatory activities, and anti-cancer effects of turmeric-derived polysaccharides (TPE-I). Several results related to the structural features revealed that TPE-I possesses a typical rhamnogalacturonan (RG)-I structure. Furthermore, macrophage cytokine secretion was significantly reduced by partial side chain and main chain cleavage of TPE-I via sequential enzymatic and chemical degradation. In contrast, the administration of TPE-I effectively enhanced the cytotoxic effects of natural killer (NK) cells and cytotoxic T lymphocytes against tumor cells. Additionally, the administration of TPE-I potently inhibited lung cancer induced by Colon26-M3.1, and this efficacy persisted even in mice with NK cell function blocked by anti-asialo GM1 antibody. Consequently, it was confirmed that TPE-I, a RG-I type polysaccharide purified from turmeric, has potent anticancer effects which are closely related to immunostimulation. The results of this study support the hypothesis that curcuminoids are not the only bioactive substances present in turmeric.

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-024-01595-z.

An in-depth review: Unraveling the extraction, structure, bio-functionalities, target molecules, and applications of pectic polysaccharides

Pectic polysaccharides have long been a challenging subject of research in the field of macromolecular science, given their complex structures and wide range of biological effects. However, the extensive exploration of pectic polysaccharides has been limited due to the intricacy of their structures. In this comprehensive review, we aim to provide a thorough summary of the existing knowledge on pectic polysaccharides, with a particular focus on aspects such as classification, extraction methodologies, structural analysis, elucidation of biological activities, and exploration of target molecules and signaling pathways. By conducting a comprehensive analysis of existing literature and research achievements, we strive to establish a comprehensive and systematic framework that can serve as a reference and guide for further investigations into pectic polysaccharides. Furthermore, this review delves into the applications of pectic polysaccharides beyond their fundamental attributes and characteristics, exploring their potential in fields such as materials, food, and pharmaceuticals. We pay special attention to the promising opportunities for pectic polysaccharides in the pharmaceutical domain and provide an overview of related drug development research. The aim of this review is to facilitate a holistic understanding of pectic polysaccharides by incorporating multifaceted research, providing valuable insights for further in-depth investigations into this significant polymer.

Controlling strategies of methanol generation in fermented fruit wine: Pathways, advances, and applications

Methanol is widely existed in fermented fruit wines (FFWs), and the concentration is excessive at times due to inappropriate fermentation conditions. Methanol is neurotoxic, and its metabolites of formaldehyde and formic acid can cause organic lesions and central respiratory system disorders. FFWs with unspecified methanol limits are often produced with reference to grape wine standards (250/400 mg/L). To clarify the causes of methanol production in FFWs and minimize the methanol content, this study summarizes the current process methods commonly applied for methanol reduction in FFWs and proposes novel potential controlling strategies from the perspective of raw materials (pectin, pectinase, and yeast), which are mainly the low esterification modification and removal of pectin, passivation of the pectinase activity, and the gene editing of yeast to target the secretion of pectinases and modulation of the glycine metabolic pathway. The modified raw materials combined with optimized fermentation processes will hopefully be able to improve the current situation of high methanol content in FFWs. Methanol detection technologies have been outlined and combined with machine learning that will potentially guide the production of low-methanol FFWs and the setting of methanol limits for specific FFW.

Optimizing the microwave-assisted hydrothermal extraction of pectin from tangerine by-product and its physicochemical, structural, and functional properties

Microwave-assisted hydrothermal extraction (MAHE) was optimized using a Box-Behnken design (BBD) of the response surface methodology (RSM) for optimal recovery of pectin from tangerine peel (TPP). The effects of three factors (pH, irradiation time and temperature) on extraction yield (EY), galacturonic acid content (GAC) and degree of esterification (DE) of pectin were investigated. The optimal extraction conditions were as follows: pH 1.7, irradiation time 12 min and temperature 109 °C. Under these conditions, the EY, GAC and DE were 30.4, 72.3 and 45.2%, respectively. The low methoxyl content of MHAE (45.2%) compared to CE is confirmed by the 1H NMR and FTIR spectra, and the emulsifying activity is 57.65% and 50.56% for CE and MHAE, respectively. The total phenolic content (TPC) of pectin produced using MAHE is 41.2 mg GAE/g, thus indicating higher antioxidant properties compared to pectin produced with CE, which had a TPC of 38.4 mg GAE/g. In addition, the X-ray diffraction (XRD) and surface morphological analysis (SEM) results showed that TPP had a rough surface and crystalline structure. Overall, our findings show that TTP from MAHE can be used as a natural antioxidant ingredient in the functional food and pharmaceutical industries.

Sequential extraction of hawthorn pectin: An attempt to reveal their original mode of being in plants and functional properties

Hawthorn is rich in pectin, which is much higher than most cultivated fruits, but conventional extraction methods do not meet the requirements of low energy consumption and green production. Pectin in hawthorn is divided into soluble and insoluble parts, and with the ripening of hawthorn, the original pectin is converted into soluble pectin and pectic acid under the action of enzymes. Therefore, based on the characteristics of hawthorn pectin, this study sequentially extracted hawthorn pectin using water-soluble pectin (WSP) and hot acid-soluble pectin (HAP) method, verifying the feasibility of extracting hawthorn pectin with pure water at room temperature, and systematically analyzing and comparing the physicochemical properties and functional characteristics of the two methods. The combination of texture analysis and gel rheology revealed that WSP formed a more uniform and dense network structure during the gelation process. Additionally, microscopic observations and emulsification index results indicated that the emulsion prepared with WSP (WSE) had a smaller particle size and better stability. This indicates that hawthorn pectin is suitable for extraction with pure water at room temperature, which can maintain its good physical properties while reducing energy consumption, providing a new approach for the large-scale extraction of pectin in the food industry.

Pectic polysaccharides from Tartary buckwheat sprouts: Effects of ultrasound-assisted Fenton treatment and mild alkali treatment on their physicochemical characteristics and biological functions

Buckwheat sprouts are rich in pectic polysaccharides, which possess numerous health-improving benefits. However, the precise structure-activity relationship of pectic polysaccharides from Tartary buckwheat sprouts (TP) is still scant, which ultimately restricts their applications in the food industry. Hence, both ultrasound-assisted Fenton treatment (UAFT) and mild alkali treatment (MATT) were utilized for the modification of TP, and then the effects of physicochemical characteristics of original and modified TPs on their bioactivities were assessed. Our findings reveled that the UAFT treatment could precisely reduce TP's molecular weight, with the levels decreased from 8.191 × 104 Da to 0.957 × 104 Da. Meanwhile, the MATT treatment could precisely reduce TP's esterification degree, with the values decreased from 28.04 % to 4.72 %. Nevertheless, both UAFT and MATT treatments had limited effects on the backbone and branched chain of TP. Moreover, our findings unveiled that the UAFT treatment could notably promote TP's antioxidant, antiglycation, and immunostimulatory effects, while remarkedly reduce TP's anti-hyperlipidemic effect, which were probably owing to that the UAFT treatment obviously reduced TP's molecular weight. Additionally, the MATT treatment could also promote TP's immunostimulatory effect, which was probably attributed to that the MATT treatment significantly decreased TP's esterification degree. Interestingly, the MATT treatment could regulate TP's antioxidant and antiglycation effects, which was probably attributed to that the MATT treatment simultaneously reduced its esterification degree and bound phenolics. Our findings are conducive to understanding TP's structure-activity relationship, and can afford a scientific theoretical basis for the development of functional or healthy products based on TPs. Besides, the UAFT treatment can be a promising approach for the modification of TP to improve its biological functions.

Cocoa by-products: A comprehensive review on potential uses, waste management, and emerging green technologies for cocoa pod husk utilization

Cocoa is considered to be one of the most significant agricultural commodities globally, alongside Palm Oil and Rubber. Cocoa is the primary ingredient in the manufacturing of chocolate, a globally popular food product. Approximately 30 % of cocoa, specifically cocoa nibs, are used as the primary constituent in chocolate production., while the other portion is either discarded in landfills as compost or repurposed as animal feed. Cocoa by-products consist of cocoa pod husk (CPH), cocoa shell, and pulp, of which about 70 % of the fruit is composed of CPH. CPH is a renewable resource rich in dietary fiber, lignin, and bioactive antioxidants like polyphenols that are being underutilized. CPH has the potential to be used as a source of pectin, dietary fibre, antibacterial properties, encapsulation material, xylitol as a sugar substitute, a fragrance compound, and in skin care applications. Several methods can be used to manage CPH waste using green technology and then transformed into valuable commodities, including pectin sources. Innovations in extraction procedures for the production of functional compounds can be utilized to increase yields and enhance existing uses. This review focuses on the physicochemical of CPH, its potential use, waste management, and green technology of cocoa by-products, particularly CPH pectin, in order to provide information for its development.

Exploring the potential of waste biomass-derived pectin and its functionalized derivatives for water treatment

Environmental pollution remains a constant challenge due to the indiscriminate use of fossil fuels, mining activities, chemicals, drugs, aromatic compounds, pesticides, etc. Many emerging pollutants with no fixed standards for monitoring and control are being reported. These have adverse impacts on human life and the environment around us. This alarms the wastewater management towards developing materials that can be used for bulk water treatment and are easily available, low cost, non-toxic and biodegradable. Waste biomass like pectin is extracted from fruit peels which are a discarded material. It is used in pharmaceutical and nutraceutical applications but its application as a material for water treatment is very limited in literature. The scientific gap in literature review reports are evident with discussion only on pectin based hydrogels or specific pectin derivatives for some applications. This review focuses on the chemistry, extraction, functionalization and production of pectin derivatives and their applications in water treatment processes. Pectin functionalized derivatives can be used as a flocculant, adsorbent, nano biopolymer, biochar, hybrid material, metal-organic frameworks, and scaffold for the removal of heavy metals, ions, toxic dyes, and other contaminants. The huge quantum of pectin biomass may be explored further to strengthen environmental sustainability and circular economy practices.

Characterization of Functional Ingredients Extracted with Ethanol Solvents from Ponkan (Citrus reticulata) By-Products Using the Microwave Vacuum Drying Method Combined with Ultrasound-Assisted Extraction

For this study, microwave vacuum drying (MVD) was combined with ultrasound-assisted extraction to compare the effects of different ethanol volumes on ponkan extract and to evaluate the total phenolic content (TPC), total flavonoid content (TFC), and total ascorbic acid content (TAAC). High-performance liquid chromatography with photodiode array detection (HPLC-PDA) was used to analyze the flavanone contents and antioxidant activity of ponkan (Citrus reticulata) peels. The experimental results showed that the TPC and TFC increase with ethanol volume. Ethanol extraction (75%) showed significant advantages by increasing the TPC to 17.48 mg GAE/g (DW) and the TFC to 2.96 mg QE/g (DW) of ponkan extract and also exhibited the highest antioxidant activity. The TAAC improved along with increased water content. Water extraction showed the highest content (13.07 mg VitC/100 g, DW). The hesperidin content analyzed by HPLC-PDA was 102.95-622.57 mg/100 g (DW), which was the highest among the flavanones. Then, the ethanol insoluble residue extracts were taken from the pectin with four different solvents, evaluating TPC, TFC, and antioxidant activity. The TPC, TFC, and antioxidant capacity of pectin are significantly lower than those of the peels. Combining MVD and 75% ethanol with ultrasound-assisted extraction in the pre-treatment process can effectively eliminate polyphenols, flavonoids, and other compounds, thus enabling the extraction of high-methoxyl pectin. The total dietary fiber (TDF) content of MVD ponkan by-products was 25.83%. Ponkan by-products have the potential for the future development of functional foods and supplements.

Potential structure-function relationships of pectic polysaccharides from quinoa microgreens: Impact of various esterification degrees

Pectic polysaccharides are one of the most vital functional ingredients in quinoa microgreens, which exhibit numerous health-promoting benefits. Nevertheless, the detailed information about the structure-function relationships of pectic polysaccharides from quinoa microgreens (QMP) remains unknown, thereby largely restricting their applications as functional foods or fortified ingredients. Therefore, to unveil the possible structure-function relationships of QMP, the mild alkali de-esterification was utilized to modify QMP, and then the correlations of esterification degrees of native and modified QMPs to their biological functions were systematically investigated. The results showed that the modified QMPs with different esterification degrees were successfully prepared by the mild alkali treatment, and the primary chemical structure (e.g., compositional monosaccharides and glycosidic linkages) of the native QMP was overall stable after the de-esterified modification. Furthermore, the results revealed that the antioxidant capacity, antiglycation effect, prebiotic potential, and immunostimulatory activity of the native QMP were negatively correlated to its esterification degree. In addition, both native and modified QMPs exerted immunostimulatory effects through activating the TLR4/NF-κB signaling pathway. These results are conducive to unveiling the precise structure-function relationships of QMP, and can also promote its applications as functional foods or fortified ingredients.

Assessing high-temperature and pressure extraction of bioactive water-soluble polysaccharides from passion fruit mesocarp

The mesocarp (albedo) of passion fruit is considered a waste product but rich in soluble fibers, especially pectins. Biological activity and health benefits of pectins have recently emerged, especially in colorectal cancer and attenuating inflammation. Pectin conventional extraction often uses mineral acids, which can be hazardous to the environment, and alternatives can be costly. Here, we assessed a high-temperature and pressure method to extract pectin from the passion fruit albedo and evaluated the differences from the water-soluble fractions extracted. HPSEC, HPAEC, FTIR-ATR, and HSQC-NMR were performed to identify and confirm the highly methylated homogalacturonan structures. The heat-modified samples showed a decreased molecular size compared to the untreated sample. Colorectal cancer cell lines showed reduced viability after being treated with different doses of modified samples, with two of them, LW-MP3 and 4, showing the most potent effects. All samples were detected inside cells by immunofluorescence assay. It was observed that LW-MP3 and 4 upregulated the p53 protein, indicating cell-cycle arrest and the cleaved caspase-9 in one of the cell lines, with LW-MP4 enhancing cell death by apoptosis. Since the modified samples were composed of hydrolyzed homogalacturonans, those probably were the responsible structures for these anti-cancer effects.

Impacts of ultrasound-assisted Fenton degradation and alkaline de-esterification on structural properties and biological effects of pectic polysaccharides from Tartary buckwheat leaves

Tartary buckwheat (Fagopyrum tataricum (L.) Gaertn) leaf has abundant rhamnogalacturonan-I enriched pectic polysaccharides, which exert various health-promoting effects. Nevertheless, the potential relationship between the chemical structure and the biological function of pectic polysaccharides from Tartary buckwheat leaves (TBP) remains unclear. Therefore, to bridge the gap between the chemical structure and the biological function of TBP, the impacts of ultrasound-assisted Fenton degradation (UFD) and mild alkaline de-esterification (MAD) on structural properties and biological effects of TBP were systematically studied. Compared with the native TBP (molecular mass, 9.537 × 104 Da), the molecular masses of degraded TBPs (TBP-MMW, 4.811 × 104 Da; TBP-LMW, 2.101 × 104 Da) were significantly reduced by the UFD modification, while their primary chemical structures were overall stable. Besides, compared with the native TBP (esterification degree, 22.73 %), the esterification degrees of de-esterified TBPs (TBP-MDE, 14.27 %; TBP-LDE, 6.59 %) were notably reduced by the MAD modification, while their primary chemical structures were also overall stable. Furthermore, the results revealed that both UFD and MAD modifications could significantly improve the antioxidant, antiglycation, and immunostimulatory effects of TBP. Indeed, TBP's biological effects were negatively correlated to its molecular mass and esterification degree, while positively linked to its free uronic acids. The findings demonstrate that both UFD and MAD modifications are promising techniques for the structural modification of TBP, which can remarkedly promote its biological effects. Besides, the present results are conducive to better understanding TBP's structure-bioactivity relationship.

Modulating pectin structure and enhancing texture of frozen yellow peaches: The impact of low-temperature blanching

High-temperature blanching (HTB) is the primary process that causes texture softening in frozen yellow peaches. The implementation of low-temperature blanching reduced pectin methyl esterification, increased pectin cross-linking, and mitigated pectin depolymerization during the subsequent HTB, leading to the superior texture of frozen yellow peaches with enhanced water holding capacity, higher fracture stress, and initial modulus. However, adding 2 % calcium lactate (w/v) during low-temperature blanching did not further improve the texture of frozen yellow peaches. Instead, it softened the texture by reducing Na2CO3-soluble pectin (NSP) and increasing water-soluble pectin (WSP) content. This study provided a theoretical basis for applying low-temperature blanching to improve the texture of frozen yellow peaches.

Exploring pectin-casein micelles as novel carriers for oral drug delivery of artesunate in the treatment of systemic lupus erythematosus

The oral route of administration is considered the optimal choice for treating chronic diseases due to its convenience and non-invasiveness, which can help prevent physical and mental harm to patients undergoing long-term treatment. However, challenges such as safety, gastrointestinal stability, and bioavailability of oral drugs often limit their effectiveness. Natural biomacromolecule micelles, known for their safety, stability, biocompatibility, and diverse functions, have emerged as promising carriers for oral treatment of chronic diseases like systemic lupus erythematosus (SLE) with fat-soluble drugs. This study introduces an innovative approach by developing an oral delivery system using chemically synthesized natural biomacromolecules to load artesunate for treating SLE. By synthesizing amphiphilic polymer micelles from pectin and casein through a carbodiimide reaction, a more stable structure is achieved. The hydrophobic core of these micelles encapsulates artesunate, resulting in the formation of an oral delivery system (PC-AS) with several advantages, including high drug loading and encapsulation efficiency, small particle size, negative potential, strong stability in the gastrointestinal tract, low toxicity and side effects, strong adhesion in the small intestine, and high bioavailability. These advantages facilitate efficient absorption of artesunate in the gastrointestinal tract, leading to improved bioavailability and effective alleviation of SLE-like symptoms in MRL/lpr mice. By utilizing chemically synthesized natural macromolecular micelles for delivering artesunate in the treatment of SLE, this study overcomes the oral barriers associated with the original drug and presents a novel solution for the long-term oral treatment of chronic diseases.

The effect of ultrasonic power on the physicochemical properties and antioxidant activities of frosted figs pectin

Ultrasound has been widely used in industry due to its high energy and efficiency. This study optimized the ultrasonic-assisted extraction (UAE) process of frosted figs pectin (FFP) using response surface methodology (RSM), and further investigated the effect of ultrasonic power on the structural characteristics and antioxidant activities of FFPs. The UAE method of FFP through RSM was optimized, and the optimal extraction process conditions, particle size of 100 mesh, pH value of 1.95, liquid-solid ratio of 47:1 (mL/g), extraction temperature of 50 °C and extraction time of 65 min, were obtained. The extraction rate of FFP under this condition was 37.97 ± 2.56 %. Then, the four FFPs modified by ultrasound were obtained by changing the ultrasonic power. Research had found that ultrasonic power had little effect on the monosaccharide composition, Zeta potential, as well as the thermal stability and appearance structure of the four FFPs. However, ultrasonic power had a significant impact on other properties of FFP: as the ultrasonic power increased, the DM% and particle size decreased continuously, while the total carbohydrate content increased. Meanwhile, ultrasonic power also had a significant impact on antioxidant activities of FFPs. From the research results, it could be seen that different ultrasonic power had certain changes in its spatial structure and properties, and the structural changes also affected the biological activity of FFP. The study of the effects of ultrasonic power on the physicochemical properties and biological activity of FFP lays the foundation for the development and application of FFP in food additives and natural drug carriers.

Structural characterization and prebiotic activity of rhamnogalacturonan-I rich pumpkin pectic polysaccharide extracted by alkaline solution

The present study aimed to investigate the structural and physicochemical characteristics of alkali-extracted pectic polysaccharide (AkPP) and to evaluate its prebiotic effects. AkPP was obtained from pumpkin pulp using an alkaline extraction method. AkPP, which had a molecular weight (Mw) of mainly 13.67 kDa and an esterification degree of 9.60%, was composed mainly of galacturonic acid (GalA), rhamnose (Rha), galactose, and arabinose. The ratio of the homogalacturonan (HG) region to the rhamnogalacturonan-I (RG-I) region in AkPP was 48.74:43.62. In the nuclear magnetic resonance spectrum, the signals indicating α-1,4-linked D-GalA, α-1,2-linked L-Rha, α-1,2,4-linked L-Rha residues were well resolved, demonstrating the presence of the HG and RG-I regions in its molecular structure. Collectively, AkPP was low methoxyl pectin rich in the RG-I region with short side chains and had a low Mw. Thermal analysis revealed that AkPP had good thermal stability. Compared to inulin, AkPP more effectively promoted the proliferation of Lactobacillus acidophilus, Lacticaseibacillus rhamnosus GG, Lacticaseibacillus casei, and Lacticaseibacillus paracasei and the production of lactic, acetic, and propionic acids. This study presents the unique structural features of AkPP and provides a scientific basis for further investigation of the potential of AkPP as a promising prebiotic.

Comprehensive Assessment of Polysaccharides Extracted from Squash by Subcritical Water under Different Conditions

The effects of subcritical water microenvironment on the physiochemical properties, antioxidant activity and in vitro digestion of polysaccharides (SWESPs) from squash were investigated. After single-factor experiments, twenty samples were successfully prepared at different extraction temperatures (110, 130, 150, 170 and 190 °C) and extraction times (4, 8, 12 and 16 min). Under a low temperature environment, the whole process was mainly based on the extraction of SWESP. At this time, the color of SWESP was white or light gray and the molecular mass was high. When the temperature was 150 °C, since the extraction and degradation of SWESP reached equilibrium, the maximum extraction rate (18.67%) was reached at 150 °C (12 min). Compared with traditional methods, the yield of squash SWESP extracted by subcritical water was 3-4 times higher and less time consuming. Under high temperature conditions, SWESPs were degraded and their antioxidant capacity and viscosity were reduced. Meanwhile, Maillard and caramelization reactions turned the SWESPs yellow-brown and produced harmful substances. In addition, different SWESPs had different effects on in vitro digestion. In brief, SWESPs prepared under different conditions have different structures and physicochemical properties, allowing the obtainment of the required polysaccharide. Our results show that squash polysaccharides prepared in different subcritical water states had good development potential and application in the food industry.

Hot-air drying vs. lyophilization of sugar beet flakes for efficient pectin recovery and influence of extraction conditions on pectin physicochemical properties

This study assessed the influence of drying pretreatment and extraction conditions (type of acid and particle size of plant material) on the yield and physicochemical properties of pectin from sugar beet flakes resulted as by-product of sugar beet processing in the sugar industry. The results indicated that the drying conditions (hot-air drying and lyophilization) affected the extraction yield, the chemical composition of pectin, its color, degree of methylation and acetylation, molecular weight, and its rheological and emulsifying properties. The best results for pectin yield (16.20%), galacturonic acid content (91.19 g/100 g), degree of methylation and acetylation (66.93 and 23.87%), and molecular weight (3.89 × 105 g/mol) were obtained when sugar beet flakes were pretreated by hot-air drying, and the extraction was made with citric acid using plant material with particle sizes of 125-200 μm. This pectin also had high emulsion activity (51.42%) and emulsion stability (88.03%). The FT-IR spectra were similar, while pectin thermal behavior was affected by the drying pretreatment and extraction conditions. The results of this study showed that from this by-product of the sugar industry it can be extracted high quality pectin with rheological and emulsifying properties that are superior to commercial citrus and apple pectin.

Properties of lime peel pectin as mainly influenced by ethanol and protein-based purification methods

BACKGROUND

Lime peel, obtained from juice factory waste, is considered as a source of pectin. Lime peel pectin samples, extracted by three extraction procedures of 90 °C heating for 120 min, 90 °C heating for 90 min and then 32 min of ultrasound, and 80 °C heating for 60 min and then 22 min of ultrasound, and purified by two methods using ethanol and sodium caseinate (SC), were prepared and characterized.

RESULTS

The results showed that the purification method significantly affected the lime pectin samples properties. Pectin samples purified with SC had a transparent and film-like appearance, whereas the ethanol-purified pectin samples showed an amorphous and opaque appearance. Pectin samples purified with ethanol showed higher extraction recovery (approximately 20%), whereas the lowest pectin yield was observed for the purification with SC (approximately 10%). Although SC purification did not enhance the pectin yield, it diminished the level of 'non-pectin' components and resulted in purer pectin. The bands at 1045-1076 cm-1 , relating to neutral sugars, had higher intensities in ethanol-purified pectin samples, indicating their higher sugar contents. Also the samples purified with SC exhibited more thermal stability, probably as a result of the presence of protein in their structure.

CONCLUSION

In the present study, under the same or varying extraction conditions, the most important element distinguishing pectins in terms of appearance, physicochemical, thermal and Fourier transform infrared characteristics was the type of purification method. Purification with SC may result in pectins with more non-esterified galacturonic acids from the homogalacturonan fraction. © 2023 Society of Chemical Industry.

Extraction, structure and antioxidant activity of the polysaccharides from morels (Morchella spp.): A review

Morels (Morchella spp.), which are cultivated only in a few regions of the world, are edible mushrooms known for their various properties including antioxidation, immune regulation, antiinflammation, and antitumor effects. Polysaccharides from Morchella are principally responsible for its antioxidant activity. This paper reviews the extraction, purification, structural analysis and antioxidant activity of Morchella polysaccharides (MPs), providing updated research progress. Meanwhile, the structural-property relationships of MPs were further discussed. In addition, based on in vitro and in vivo studies, the major factors responsible for the antioxidant activity of MPs were summarized including scavenging free radicals, reduction capacity, inhibitory lipid peroxidation activity, regulating the signal transduction pathway, reducing the production of ROS and NO, etc. Finally, we hope that our research can provide a reference for further research and development of MPs.

Efficient and Selective Extraction of Rhamnogalacturonan-I-Enriched Pectic Polysaccharides from Tartary Buckwheat Leaves Using Deep-Eutectic-Solvent-Based Techniques

Tartary buckwheat green leaves are considered to be among the most important by-products in the buckwheat industry. Although Tartary buckwheat green leaves are abundant in pectic polysaccharides, their potential applications in the food industry are quite scarce. Therefore, to promote their potential applications as functional or fortified food ingredients, both deep-eutectic-solvent-assisted extraction (DESE) and high-pressure-assisted deep eutectic solvent extraction (HPDEE) were used to efficiently and selectively extract pectic polysaccharides from Tartary buckwheat green leaves (TBP). The results revealed that both the DESE and HPDEE techniques not only improved the extraction efficiency of TBP but also regulated its structural properties and beneficial effects. The primary chemical structures of TBP extracted using different methods were stable overall, mainly consisting of homogalacturonan and rhamnogalacturonan-I (RG-I) pectic regions. However, both the DESE and HPDEE methods could selectively extract RG-I-enriched TBP, and the proportion of the RG-I pectic region in TBP obviously improved. Additionally, both the DESE and HPDEE methods could improve the antioxidant and anti-glycosylation effects of TBP by increasing its proportion of free uronic acids and content of bound polyphenolics and reducing its molecular weight. Moreover, both the DESE and HPDEE methods could partially intensify the immunostimulatory effect of TBP by increasing its proportion of the RG-I pectic region. These findings suggest that DES-based extraction techniques, especially the HPDEE method, can be promising techniques for the efficient and selective extraction of RG-I-enriched TBP.

Toxicological evaluation of a pumpkin-derived pectin preparation: in vitro genotoxicity studies and a 13-week oral toxicity study in Sprague-Dawley rats

The safety of a rhamnogalacturonan-I-enriched pectin extract (G3P-01) from pumpkin (Cucurbita moschata var. Dickinson) was evaluated for use as an ingredient in food and dietary supplements. G3P-01 was tested in a battery of genetic toxicity studies including reverse mutagenicity and in vitro micronucleus assay. In addition, Sprague-Dawley rats were randomized and orally dosed with G3P-01 incorporated in animal diet at concentrations of 0, 9000, 18,000, and 36,000 ppm daily for 13-weeks (n=10/sex/group) in line with OECD guidelines (TG 408). The results of the in vitro bacterial reverse mutation assay and micronucleus assay in TK6 cells demonstrated a lack of genotoxicity. The 13-week oral toxicity study in Sprague-Dawley rats demonstrated that the test article, G3P-01 was well tolerated; there were no mortalities and no adverse effects on clinical, gross pathology, hematology, blood chemistry, and histological evaluation of the essential organs of the animals. The present study demonstrates that G3P-01 is non-genotoxic and is safe when ingested in diet at concentrations up to 36, 000 ppm. The subchronic no-observed-adverse-effect level (NOAEL) for G3P-01 was concluded to be 36,000 ppm, equivalent to 1,899 and 2,361 mg/kg/day for male and female rats respectively.

Recovering rhamnogalacturonan-I pectin from sugar beet pulp using a sequential ultrasound and microwave-assisted extraction: Study on extraction optimization and membrane purification

This research focuses on the integrated recovery of rhamnogalacturonan-I (RG-I) pectin from sugar beet pulp (SBP). First, the extraction of RG-I pectin through sequential ultrasound-assisted extraction (UAE) and microwave-assisted extraction (MAE) was assessed. Optimization using a response surface methodology identified the optimal conditions as initial pH 4, 10 min of UAE, and 157 °C for MAE, achieving a 66.0 % recovery of pectooligosaccharides (POS). Additionally, purification through continuous diafiltration and concentration via ultrafiltration of the POS using membranes with different molecular weight cut-offs (MWCO) was explored. In contrast to previous research using discontinuous diafiltration, the use of continuous diafiltration allowed a decrease in the extract viscosity and obtained higher yields using a higher MWCO membrane. The refined RG-I pectin solids exhibited a high global yield (39-40 g pectin/100 g SBP), and high-methoxyl characteristics, as well as purity levels (70-80 %) similar to commercial prebiotics.

Non-starch polysaccharides from kidney beans: comprehensive insight into their extraction, structure and physicochemical and nutritional properties

Kidney beans (Phaseolus vulgaris L.) are an important legume source of carbohydrates, proteins, and bioactive molecules and thus have attracted increasing attention for their high nutritional value and sustainability. Non-starch polysaccharides (NSPs) in kidney beans account for a high proportion and have a significant impact on their biological functions. Herein, we critically update the information on kidney bean varieties and factors that influence the physicochemical properties of carbohydrates, proteins, and phenolic compounds. Furthermore, their extraction methods, structural characteristics, and health regulatory effects, such as the regulation of intestinal health and anti-obesity and anti-diabetic effects, are also summarized. This review will provide suggestions for further investigation of the structure of kidney bean NSPs, their relationships with biological functions, and the development of NSPs as novel plant carbohydrate resources.

Development and characterization of sustainable active pectin films: The role of choline chloride/glycerol-based natural deep eutectic solvent and lavender extracts

This study aimed to evaluate the potential effects of choline chloride: glycerol-based natural deep eutectic solvent (NADES) as a plasticizer, NADES extract (NADESext) of lavender as both plasticizer and active ingredient, as well as the lyophilized extract (LE) of lavender at different concentrations (0.5 %, 1 %, and 2 %) on the physical, mechanical, optical, thermal, barrier, morphological, and antioxidant properties of pectin films. The properties of the films were compared to those of the neat pectin film and the film plasticized with glycerol. The addition of plasticizers and LE increased thickness, water vapor permeability, and elongation at break values of the films while decreasing tensile strength and young modulus. Pectin films plasticized with glycerol, NADES, and NADESext had a similar color property but a lower opacity. The use of LE decreased lightness and increased opacity compared to the films with plasticizers. The addition of plasticizers revealed a smoother surface than neat pectin film while LE triggered the formation of agglomerates on the films. Changes in the FTIR spectra of the films showed some interactions between pectin and polyphenols in LE. The plasticizers had an insignificant effect on the antioxidant capacity of films whereas LE improved antioxidant capacity depending on the concentration. In conclusion, the results suggested that pectin films with NADES and LE could be beneficially used to improve antioxidant packaging technology along with acceptable mechanical properties.

Food waste biorefinery towards circular economy in Australia

Staggering amounts of food waste are produced in Australia, and this review provides food waste based biorefinery opportunities in moving towards a circular economy in Australia. The current food waste scenario in Australia including an overview of primary food waste sources, government regulation, and current management practices is presented. The major food waste streams include fruit and vegetable (waste from wine grapes, citrus, apple, potato, and tomato), nuts (almond processing waste), seafood (Fish waste), dairy whey, sugarcane bagasse, and household and businesses. The composition of these waste streams indicated their potential for use in biorefineries to produce value-added products via various pathways combining direct extraction and biological and thermochemical conversion. Finally, the efforts made in Australia to utilize food waste as a resource, as well as the challenges and future directions to promote the development of concrete and commercially viable technologies for food waste biorefinery, are described.

The digestive behavior of pectin in human gastrointestinal tract: a review on fermentation characteristics and degradation mechanism

Pectin is widely spread in nature and it develops an extremely complex structure in terms of monosaccharide composition, glycosidic linkage types, and non-glycosidic substituents. As a non-digestible polysaccharide, pectin exhibits resistance to human digestive enzymes, however, it is easily utilized by gut microbiota in the large intestine. Currently, pectin has been exploited as a novel functional component with numerous physiological benefits, and it shows a promising prospect in promoting human health. In this review, we introduce the regulatory effects of pectin on intestinal inflammation and metabolic syndromes. Subsequently, the digestive behavior of pectin in the upper gastrointestinal tract is summarized, and then it will be focused on pectin's fermentation characteristics in the large intestine. The fermentation selectivity of pectin by gut bacteria and the effects of pectin structure on intestinal microecology were discussed to highlight the interaction between pectin and bacterial community. Meanwhile, we also offer information on how gut bacteria orchestrate enzymes to degrade pectin. All of these findings provide insights into pectin digestion and advance the application of pectin in human health.

Towards Valorization of Food-Waste-Derived Pectin: Recent Advances on Their Characterization and Application

Pectin, a natural biopolymer, can be extracted from food waste biomass, adding value to raw materials. Currently, commercial pectin is mostly extracted from citrus peels (85.5%) and apple pomace (14.0%), with a small segment from sugar beet pulp (0.5%). However, driven by high market demand (expected to reach 2.12 billion by 2030), alternative agro-industrial waste is gaining attention as potential pectin sources. This review summarizes the recent advances in characterizing pectin from both conventional and emerging food waste sources. The focus is the chemical properties that affect their applications, such as the degree of esterification, the neutral sugars' composition, the molecular weight, the galacturonic acid content, and technological-functional properties. The review also highlights recent updates in nutraceutical and food applications, considering the potential use of pectin as an encapsulating agent for intestinal targeting, a sustainable biopolymer for food packaging, and a functional and emulsifying agent in low-calorie products. It is clear from the considered literature that further studies are needed concerning the complexity of the pectin structure extracted from emerging food waste raw materials, in order to elucidate their most suitable commercial application.

Unveiling Plant-Based Pectins: Exploring the Interplay of Direct Effects, Fermentation, and Technological Applications in Clinical Research with a Focus on the Chemical Structure

Pectin, a plant-derived polysaccharide, possesses immense technological and biological application value. Several variables influence pectin's physicochemical aspects, resulting in different fermentations, interactions with receptors, and other functional properties. Some of those variables are molecular weight, degree of methylation and blockiness, and monosaccharide composition. Cancer cell cytotoxicity, important fermentation-related byproducts, immunomodulation, and technological application were found in cell culture, animal models, and preclinical and clinical assessments. One of the greater extents of recent pectin technological usage involves nanoencapsulation methods for many different compounds, ranging from chemotherapy and immunotherapy to natural extracts from fruits and other sources. Structural modification (modified pectin) is also utilized to enhance the use of dietary fiber. Although pectin is already recognized as a component of significant importance, there is still a need for a comprehensive review that delves into its intricate relationships with biological effects, which depend on the source and structure of pectin. This review covers all levels of clinical research, including cell culture, animal studies, and clinical trials, to understand how the plant source and pectin structures influence the biological effects in humans and some technological applications of pectin regarding human health.

A wide diversity exists in pectin structure from thirteen apple cultivars

To emphasize that differences in pectin structure among cultivars play a crucial role in the texture and quality of fruits and vegetables, the sugar content and methyl-esterification of pectin fractions from 13 apple cultivars was studied. Cell wall polysaccharides were isolated as alcohol-insoluble solids (AIS) and subsequently extracted to yield water-soluble solids (WSS) and chelating-soluble solids (ChSS). All fractions contained significant amounts of galacturonic acid, while sugar compositions varied between cultivars. AIS and WSS pectins showed a degree of methyl-esterification (DM) > 50 %, while ChSS pectins had either a medium (~50 %) or low (<30 %) DM. Homogalacturonan as major structure was studied using enzymatic fingerprinting. Methyl-ester distribution of pectin was described by degrees of blockiness and -hydrolysis. Novel descriptive parameters were obtained by measuring the levels of methyl-esterified oligomers released by endo-PG (DB_PGme) and PL (DB_PLme). Pectin fractions differed in relative amounts of non-, moderately-, and highly methyl-esterified segments. WSS pectins were mostly lacking non-esterified GalA sequences, while ChSS pectins had medium DM and many non-methyl-esterified blocks or a low DM with many intermediate methyl-esterified GalA blocks. These findings will be of help to better understand physicochemical properties of apple and its products.

Research progress on extraction of active components from apple processing waste

Apple waste (APW) is the residual product after apple processing, including apple peel, apple core, apple seed, and other components. A large quantity of APW produced is abandoned annually, leading to serious resource waste and environmental pollution. APW is rich in natural active compounds, such as pectin, polyphenols, fatty acids, and dietary fiber, which has a good use value. This paper reviewed the current research on recovering active components from APW. The traditional extraction methods (acid, alkali, physical, enzyme, etc.) and the novel extraction methods (SWE, UAE, MAE, RFAE, etc.) for the recovery of pectin, polyphenols, apple seed oil, apple seed protein, and dietary fiber from APW were systematically summarized. The basic principles, advantages, and disadvantages of different extraction methods were introduced. The requirements of different extraction methods on extraction conditions and the effects of different extraction methods on the yield, quality, and functional activity of extracted products were analyzed. The challenges and future study direction of APW extraction have prospected. This paper aims to provide a reference for other researchers interested in APW extraction, improve the utilization rate of APW and extend the value chain of the apple industry.

Current progress in valorization of food processing waste and by-products for pectin extraction

Food processing waste and by-products such as peel of citrus fruit, melon, mango, pineapple, etc. and fruit pomace can be utilized for manufacturing of several high-value products. Valorization of these waste and by-products for extraction of pectin, can help offset growing environmental concerns, facilitate value-addition of by-products and their sustainable uses. Pectin has many applications in food industries such as gelling, thickening, stabilizing, and emulsifying agent, and as a dietary fibre. This review elaborates on various conventional and advanced, sustainable pectin extraction techniques, and paints a comparative picture between them considering extraction efficiency, quality, and functionality of the pectin. Conventional acid, alkali, and chelating agents-assisted extraction have been profusely used for pectin extraction, but advanced extraction technologies e.g., enzyme, microwave, supercritical water, ultrasonication, pulse electric field and high-pressure extraction are preferred due to less energy consumption, better quality product, higher yield, and minimal or no generation of harmful effluent.

Recent progress in pectin extraction, characterization, and pectin-based films for active food packaging applications: A review

Pectin is an abundant complex polysaccharide obtained from various plants. Safe, biodegradable, and edible pectin has been extensively utilized in the food industry as a gelling agent, thickener, and colloid stabilizer. Pectin can be extracted in a variety of ways, thus affecting its structure and properties. Pectin's excellent physicochemical properties make it suitable for many applications, including food packaging. Recently, pectin has been spotlighted as a promising biomaterial for manufacturing bio-based sustainable packaging films and coatings. Functional pectin-based composite films and coatings are useful for active food packaging applications. This review discusses pectin and its use in active food packaging applications. First, basic information and characteristics of pectin, such as the source, extraction method, and structural characteristics, were described. Then, various methods of pectin modification were discussed, and the following section briefly described pectin's physicochemical properties and applications in the food sector. Finally, the recent development of pectin-based food packaging films and coatings and their use in food packaging were comprehensively discussed.

Physicochemical and functional properties of RG-I enriched pectin extracted from thinned-young apples

The demand for obtaining pectin from new sources has been continuously increasing. The abundant but underutilized thinned-young apple is a potential source of pectin. In this study, an organic acid (i.e., citric acid) and two inorganic acids (i.e., hydrochloric acid and nitric acid) commonly used in commercial pectin production were applied to extract pectin from three varieties of thinned-young apples. The physicochemical and functional properties of the thinned-young apple pectin were comprehensively characterized. The highest pectin yield (8.88 %) was obtained from Fuji apple using citric acid extraction. All pectin was high methoxy pectin (HMP) and rich in RG-I regions (>56 %). The citric acid extracted pectin had the highest molecular weight (Mw) and lowest degree of esterification (DE) values, and exhibited great thermal stability and shear-thinning property. Furthermore, Fuji-apple pectin possessed significantly better emulsifying properties compared to pectin obtained from the other two varieties of apples. Thus, pectin extracted with citric acid from Fuji thinned-young apples has great potential to be applied in the food industry as a natural thickener and emulsifier.

Recent progress in pectin extraction and their applications in developing films and coatings for sustainable food packaging: A review

Perishable foods like fruits and vegetables, meat, fish, and dairy products have short shelf-life that causes significant postharvest losses, which poses a major challenge for food supply chains. Biopolymers have been extensively studied as sustainable alternatives to synthetic plastics, and pectin is one such biopolymer that has been used for packaging and preservation of foods. Pectin is obtained from abundantly available low-cost sources such as agricultural or food processing wastes and by products. This review is a complete account of pectin extraction from agro-wastes, development of pectin-based composite films and coatings, their characterizations, and their applications in food packaging and preservation. Compared to conventional chemical extraction, supercritical water, ultrasound, and microwave assisted extractions are a few examples of modern and more efficient pectin extraction processes that generate almost no hazardous effluents, and thus, such extraction techniques are more environment friendly. Pectin-based films and coatings can be functionalized with natural active agents such as essential oils and other phytochemicals to improve their moisture barrier, antimicrobial and antioxidant properties. Application of pectin-based active films and coatings effectively improved shelf-life of fresh cut-fruits, vegetables, meat, fish, poultry, milk, and other food perishable products.

Quantitative determination of galacturonic acid in pectin and pectin products by combined pectinase hydrolysis and HPLC determination

Pectin is a complex heteropolysaccharide with a predominantly galacturonic acid (GalA) main chain and various branching sugars, leading to some analytical and quantitative determination challenges. By comparison with various acid hydrolysis methods, an effective and precise hydrolysis method for GalA determination from pectin was investigated using a combination of pectinase hydrolysis (PH) and HPLC determination, which was named the PH-HPLC method. With a pectinase loading of 2250 U/g pectin, 4.0 g/L commercial pectin was almost completely hydrolysed to the intact and detectable GalA at 50 °C after 24 h, for quantitative determination by HPLC. Acid-catalysis methods showed obvious disadvantages in terms of GalA degradation or incomplete hydrolysis of pectin, resulting in imprecise determination results. Moreover, the PH-HPLC method was employed for the quantitative determination of GalA in three common natural pectin feedstocks and indicated 45.5-233.1% higher content of GalA than the acid hydrolysis method. Thus, the PH-HPLC method is demonstrated to be a precise approach for analysing and quantifying the GalA of pectin and respective feedstock.

The Antiproliferative Activity of a Mixture of Peptide and Oligosaccharide Extracts Obtained from Defatted Rapeseed Meal on Breast Cancer Cells and Human Fibroblasts

Oligosaccharide and peptide extracts obtained separately from defatted rapeseed meal (DRM) have shown antiproliferative activities on the MCF-7 breast cancer cell line. However, oligosaccharide extracts were not tested on human fibroblasts and have low yields. The objective of the present study was to combine two antiproliferative extracts, the peptides and oligosaccharides, that were obtained independently with commercial enzymes from DRM, allowing improvement of the mass yield and antiproliferative activity. The DRM was solubilized in an alkaline medium to obtain an insoluble meal residue (IMR) and an alkaline extract (RAE). To produce the oligosaccharide extract from IMR, three enzymes and different enzyme/substrate ratios were used. The oligosaccharide extract (molecular weight <30 kDa) recovered with the commercial enzyme. Endogalacturonase showed an 80% inhibition on MCF-7 cells at 20 mg/mL. The combination of this oligosaccharide extract with the peptide extract (obtained with Alkalase 2.4 L from a RAE at 10 mg/mL) inhibited 84.3% of MCF-7 cells proliferation at a concentration of 20 mg/mL, exhibiting no cytotoxic effects on fibroblasts. The mass yield of the extract pool was 27.07% (based on initial DRM). It can be concluded that a mixture of antiproliferative extracts was produced from DRM which was selective against MCF-7 cells.

Physicochemical properties and prebiotic activities of polysaccharides from Zizyphus jujube based on different extraction techniques

Zizyphus jujube polysaccharide was extracted with hot water, ultrahigh pressure, deep eutectic solvent (DES) and ultrahigh pressure-assisted DES. Comparative analyses were conducted on the yield, physicochemical properties and prebiotic activity of four polysaccharides (JP-H, JP-U, JP-D and JP-UD). The yield of JP-UD (10.42 %) was 3.3 times that of JP-H (3.12 %), and its sugar content was the highest. JP-UD possessed the lowest Mw, while JP-H possessed the highest. Four JPs were acidic pyranose and mainly composed of galacturonic acid, arabinose and galactose. NMR results demonstrated that they contained not only similar glycosidic linkage but also the specific glycosidic linkage of →4)-α-D-Glcp-(l→ appeared in JP-U and JP-UD, the esterified units of GalA and CONH₂ group appeared in JP-D and JP-UD, and the Terminal β-D-Galp and →4)-α-GalpA-(1→ appeared in JP-UD. JPs showed different proliferation effects on four lactobacillus strains, among which JP-UD exhibited the strongest prebiotic activity. Zizyphus jujube polysaccharides have great potential for application in the functional food and medical industry.