Release of titanium ions from an implant surface and their effect on cytokine production related to alveolar bone resorption

Cargo-less Nanoparticles Prevent Bone Loss in Periodontitis and Peri-implantitis

Periodontal and peri-implant diseases are a significant public health problem worldwide, resulting in the destruction of the supporting bone. These bone defects can cause esthetic problems, increased relapse rate, and eventually tooth loss. The etiology of periodontal disease involves an influx of innate immune cells (neutrophils and monocytes) and upregulation of local inflammatory cytokines in the gingiva. Biodegradable polymeric nanoparticles are an inexpensive, safe, and effective means of preventing innate immune activation by bacterial biofilms. We therefore hypothesize that this technology is a potential means of managing periodontal disease. Polylactic acid (PLA) particles were fabricated using an oil-in-water emulsion and used as a therapy in ligature-induced periodontitis and peri-implantitis. Mice were treated daily with nanoparticles or saline control through intravenous injection for 5 or 7 d. Bone loss and quality were characterized using micro-computed tomography and histology, and immune cell infiltrate was characterized by flow cytometry and enzyme-linked immunosorbent assay. PLA particle therapy prevented bone loss in both periodontitis and peri-implantitis. Particle treatment was associated with decreased osteoclast activation. Flow cytometry showed particles were mainly taken up by macrophages and limited inflammatory monocyte recruitment to the ligature site. In vitro evaluation of particle therapy demonstrated the inhibition of toll-like receptor activation during particle treatment. These results extended to monocytes that had been presensitized by titania nanoparticles. Taken together, the results of these experiments demonstrated that cargo-less PLA particle therapy may be a safe, cost-effective therapy to manage inflammatory bone loss in periodontal disease.

The impact of biocorrosion and titanium ions release on peri-implantitis

OBJECTIVES

Biofilm accumulation is considered the primary cause of peri-implant inflammation. Still, metallosis caused by an increased concentration of titanium ions at the site of peri-implantitis site cannot be ignored. Whether titanium ions alone or in concert with bacterial biofilm trigger inflammation and bone destruction in peri-implant tissues remains unproven.

MATERIALS AND METHODS

Articles were retrieved from PubMed/Medline, Web of Science. All studies focusing on titanium ions release in peri-implant reactions were included and evaluated.

RESULTS

Titanium implants are considered non-inert and may release titanium ions in the intraoral microenvironment, the most important of which is the acidic environment created by bacterial biofilms. Although the correlation between titanium ion release and the incidence or progression of peri-implantitis is controversial, several studies have confirmed the potential role of titanium ions. Diffusion or entry of titanium ions into the circulation may be a scavenging effect on local titanium ions but can cause systemic adverse effects. However, existing measures are not yet able to balance reducing biocorrosion and maintaining osteogenic results, and the exploration of new materials requires long-term clinical data.

CONCLUSIONS

Titanium ions have potential impacts on peri-implant tissue and systemic circulation. Titanium ions are closely associated with bacterial biofilms in the occurrence and development of periimplantitis. The preventive strategies for the release and action of titanium ions remain to be explored.

CLINICAL RELEVANCE

Our findings may provide the hope of shedding light on the pathogenesis of peri-implantitis and its treatment.

Nitrided Ti-6Al-4V: A Catalyst for Increase Mineralization and Osteogenic Marker Expression

Plasma nitriding is one of the surface modifications that show more effectiveness than other methods. In this study, the plasma-based ion implantation (PBII) technique was performed on the surface of titanium alloy (Ti-6Al-4V, Ti64) using a mixture of nitrogen (N2) and argon (Ar), resulting in a plasma-nitrided surface (TiN-Ti64). The surface composition of the TiN-Ti64 was verified through X-ray photoelectron spectroscopy (XPS). TiN-Ti64 demonstrated superior hydrophilicity compared with Ti64. TiN-Ti64 exhibited higher surface hardness than the original surface. The biological responses of primary human alveolar bone cells (hAVs) were observed on the TiN-Ti64, revealing greater activation of cell adhesion and spreading compared with Ti64 and the control group (glass coverslip). Moreover, the TiN-Ti64 significantly promoted cell proliferation compared with Ti64 and tissue culture plates. The mineralization of hAVs on the TiN-Ti64 showed a significant increase, almost 20% greater than that of Ti64. Furthermore, a significant upregulation of mRNA expression for osteogenic differentiation marker genes, including BMP2, OCN, OPN, and RUNX2, was observed in TiN-Ti64 compared with other conditions. In addition, the TiN-Ti64 exhibited antibiofilm activity against Streptococcus aureus. In conclusion, the TiN-Ti64, modified with the PBII technique utilizing a mixture of N2 and Ar, emerges as a promising alternative for surface modification in dental implant applications.

Modulating dual carrier-transfer channels and band structure in carbon nitride to amplify ROS storm for enhanced cancer photodynamic therapy

Graphite carbon nitride (CN) eliminates cancer cells by converting H2O2 to highly toxic •OH under visible light. However, its in vivo applications are constrained by insufficient endogenous H2O2, accumulation of OH- and finite photocarriers. We designed Fe/NV-CN, co-modified CN with nitrogen vacancies (NV) and ferric ions (Fe3+). NV and Fe3+, not only adjust the band structure of CN through quantum confinement effect and the altered coupled oscillations of atomic orbitals to facilitates •OH production by oxidizing OH-, but also construct dual carrier-transfer channels for electrons and holes to respective active sites by introducing stepped electrostatic potential and shortening three-electron bonds, thereby involving more carriers in •OH production. Fe/NV-CN, the novel reactor, effectually produces vast •OH under illumination by expanding OH- as the raw material of •OH and augmenting carriers at active sites, which induces cancer cell apoptosis by disrupting mitochondrial function for significant shrinkage of Cal27 cell-induced tumor under illumination. This work provides not only an effective photosensitizer avoiding the accumulation of OH- for cancer therapy but also a novel strategy by constructing dual carrier-transfer channels on semiconductor photosensitizers for improving the therapeutic effect of photodynamic therapy.

Orthodontic Alloy Wires and Their Hypoallergenic Alternatives: Metal Ions Release in pH 6.6 and pH 5.5 Artificial Saliva

Legislative framework addresses the issues of alloy corrosion, demanding the restricted use of probable carcinogenic, mutagenic, and toxic-for-human-reproduction (CMG) metals like nickel, cobalt, and chromium and demanding the development of new biomaterials. The aim of this research was to evaluate and compare the ion release of standard dental alloys and their hypoallergenic equivalents. Six types of orthodontic alloy wires (nickel-titanium (NiTi), coated NiTi, stainless steel (SS), Ni-free SS, and cobalt-chromium (CoCr) and titanium-molybdenum (TMA) were immersed into artificial saliva of pH 5.5 and 6.6. Release of metal ions was measured by inductively coupled plasma-mass spectrometry after 3, 7, 14 and 28 days. The data were analyzed using analysis of variance, and results with p < 0.05 were considered significant. NiTi released more Ti and Ni ions compared to the coated NiTi; SS released more iron, chromium, and nickel compared to the nickel-free SS. CoCr released cobalt in a high concentration and low amounts of chromium, nickel, and molybdenum compared to the molybdenum and titanium released by TMA. Release of metals from dental orthodontic alloys in vitro was overall lower at pH 6.6 and for the hypoallergenic equivalents when compared to standard dental alloys.

Titanium corrosion products from dental implants and their effect on cells and cytokine release: A review

INTRODUCTION

Titanium is considered to be an inert material owing to the ability of the material to form a passive titanium oxide layer. However, once the titanium oxide layer is lost, it can lead to exposure of the underlying titanium substructure and can undergo corrosion.

SUMMARY

The article explores the role of titanium ions and particles from dental implants on cells, cytokine release, and on the systemic redistribution of these particles as well as theories proposed to elucidate the effects of these particles on peri-implant inflammation based on evidence from in-vitro, human, and animal studies. Titanium particles and ions have a pro-inflammatory and cytotoxic effect on cells and promote the release of pro-inflammatory mediators like cytokines. Three theories to explain etiopathogenesis have been proposed, one based on microbial dysbiosis, the second based on titanium particles and ions and the third based on a synergistic effect between microbiome and titanium particles on the host.

CONCLUSION

There is clear evidence from in-vitro and limited human and animal studies that titanium particles released from dental implants have a detrimental effect on cells directly and through the release of pro-inflammatory cytokines. Future clinical and translational studies are required to clarify the role of titanium particles and ions in peri-implant inflammation and the etiopathogenesis of peri-implantitis.

Quantity and Size of Titanium Particles Released from Different Mechanical Decontamination Procedures on Titanium Discs: An In Vitro Study

Complications such as peri-implantitis could ultimately affect the survival of a dental implant. The prevention and treatment of peri-implant diseases require managing bacterial biofilm and controlling environmental risks, including the presence of pro-inflammatory titanium (Ti) particles in the peri-implant niche. Objectives included the evaluation of the size and quantity of Ti particles released from moderately roughened Ti surfaces during common mechanical surface decontamination methods. One hundred and forty moderately roughened Ti discs were divided into seven groups (n = 20 per group); six groups received mechanical decontamination procedures (ultrasonic scaling (US) with a metal tip and poly-ether-ketone (PEEK) under low and medium power settings, air-polishing with erythritol powder, and Ti brush), and the control group underwent air-water spray using a dental triplex. The rinsing solution was collected for Ti mass analysis using inductively coupled plasma mass spectrometry (ICPMS), as well as for Ti particle size and count analysis under scanning electron microscopy (SEM) with energy-dispersive spectroscopy (EDS). US metal tip instrumentation generated 34.00 ± 12.54 μg and 34.44 ± 6.08 μg of Ti under low and medium power settings, respectively. This amount of Ti generation was significantly higher than other instrumentation methods. The mean Ti particle size of the US groups ranged from 0.89 ± 0.27 μm to 1.25 ± 0.24 μm. No statistically significant difference was found in the particle size among US groups and Ti brush group (1.05 ± 0.11 μm), except for US with the PEEK tip, where a significantly smaller mean particle diameter was found at the low power setting (0.89 ± 0.27 μm). Mechanical instrumentation can produce Ti particulates and modify the implant surfaces. US using a metal tip generated the highest amount of Ti with smaller Ti size particles compared to all other commonly used mechanical surface instrumentations. The EDS analysis confirmed Ti in PEEK US tips. It can be suggested that deterioration from the PEEK US tip and Ti brush, as observed under SEM, is an additional source of Ti release during Ti surface decontamination.

The contribution of metal allergy to the failure of metal alloy implants, with special reference to titanium: Current knowledge and controversies

After almost three-quarters of a century during which contact dermatologists have often struggled to comprehend the relationship between metal allergy and failure of metal-alloy containing implant, it is possible to say that a relationship does exist, particularly for cobalt and chromium, but also for nickel. There is still debate as to whether allergy develops as a consequent of failure but thenceforth contributes to it, or whether sensitisation starts first and induces failure secondarily-opinion probably favours the first. Metal-on-polypropylene articulations were associated with few metal allergic problems but now are less favoured by orthopaedists due to plastic wear products causing osteolysis and pseudotumour formation through local inflammation. New metal alloys are regularly being introduced such that interested dermatologists need to stay on top of the situation. The jury is still out as to whether the recent favouring of titanium-containing alloys will confirm them to be more inert allergenically. Case reports do show some clinical reactions to titanium-containing implants and patch test series have inferred sometimes quite a high background rate of allergy, but interpretation must be tempered by the awareness that titanium salts on patch testing have a tendency to cause irritant reactions. Blood monitoring of metal ion values is now recommended in certain situations after joint replacement and increasing levels may be an indication that allergy with joint failure can develop, in which case patch testing is indicated, and suggested series are available. Predictive patch testing, whilst generally not recommended in the past, has been introduced into some protocols often by non-dermatologists, such that it is now needed for temporo-mandibular joint and Nuss bar insertion, and it can be anticipated that this may become more commonplace in the future. One of the major current deficits for patch testers is standardised guidance on which preparation or preparations to use for suspected titanium allergy. One suggestion is 0.5% titanium sulphate in petrolatum, though experience in at least one centre suggests the use of a battery of titanium salts might be desirable.

A Mapping Review of the Pathogenesis of Peri-Implantitis: The Biofilm-Mediated Inflammation and Bone Dysregulation (BIND) Hypothesis

This mapping review highlights the need for a new paradigm in the understanding of peri-implantitis pathogenesis. The biofilm-mediated inflammation and bone dysregulation (BIND) hypothesis is proposed, focusing on the relationship between biofilm, inflammation, and bone biology. The close interactions between immune and bone cells are discussed, with multiple stable states likely existing between clinically observable definitions of peri-implant health and peri-implantitis. The framework presented aims to explain the transition from health to disease as a staged and incremental process, where multiple factors contribute to distinct steps towards a tipping point where disease is manifested clinically. These steps might be reached in different ways in different patients and may constitute highly individualised paths. Notably, factors affecting the underlying biology are identified in the pathogenesis of peri-implantitis, highlighting that disruptions to the host-microbe homeostasis at the implant-mucosa interface may not be the sole factor. An improved understanding of disease pathogenesis will allow for intervention on multiple levels and a personalised treatment approach. Further research areas are identified, such as the use of novel biomarkers to detect changes in macrophage polarisation and activation status, and bone turnover.

Emerging factors affecting peri-implant bone metabolism

Implant dentistry has evolved to the point that standard implant osseointegration is predictable. This is attributed in part to the advancements in material sciences that have led toward improvements in implant surface technology and characteristics. Nonetheless, there remain several cases where implant therapy fails (specifically at early time points), most commonly attributed to factors affecting bone metabolism. Among these patients, smokers are known to have impaired bone metabolism and thus be subject to higher risks of early implant failure and/or late complications related to the stability of the peri-implant bone and mucosal tissues. Notably, however, emerging data have unveiled other critical factors affecting osseointegration, namely, those related to the metabolism of bone tissues. The aim of this review is to shed light on the effects of implant-related factors, like implant surface or titanium particle release; surgical-related factors, like osseodensification or implanted biomaterials; various drugs, like selective serotonin reuptake inhibitors, proton pump inhibitors, anti-hypertensives, nonsteroidal anti-inflammatory medication, and statins, and host-related factors, like smoking, diet, and metabolic syndrome on bone metabolism, and aseptic peri-implant bone loss. Despite the infectious nature of peri-implant biological complications, these factors must be surveyed for the effective prevention and management of peri-implantitis.

Diagnostic value of VEGF in peri-implantitis and its correlation with titanium particles: A controlled clinical study

OBJECTIVES

VEGF is prototypic marker of neovascularization, repeatedly proposed as intrinsic characteristic of peri-implantitis. This study aimed to assess pattern of VEGF in peri-implantitis, its correlation with titanium particles (TPs) and capacity as respective biomarker.

MATERIAL AND METHODS

Pathological specificity of VEGF was assessed in peri-implant granulations using immunohistochemistry, periodontal granulations represented Ti-free positive controls. VEGF was correlated to TPs, identified using scanning electron microscopy coupled with dispersive x-ray spectrometry. Diagnostic accuracy, sensitivity and specificity of VEGF were estimated in PICF specimens from peri-implantitis, peri-implant mucositis (PIM) and healthy peri-implant tissues (HI) using machine learning algorithms.

RESULTS

Peri-implantitis exhibited rich neovascular network with expressed density in contact zones toward neutrophil infiltrates without specific pattern variations around TPs, identified in all peri-implantitis specimens (mean particle size 8.9 ± 24.8 µm2; Ti-mass (%) 0.380 ± 0.163). VEGF was significantly more expressed in peri-implantitis (47,065 ± 24.2) compared to periodontitis (31,14 ± 9.15), and positively correlated with its soluble concentrations in PICF (p = 0.01). VEGF was positively correlated to all clinical endpoints and significantly increased in peri-implantitis compared to both PIM and HI, but despite high specificity (96%), its overall diagnostic capacity was average. Two patient clusters were identified in peri-implantitis, one with 8-fold higher VEGF values compared to HI, and second with lower values comparable to PIM.

SIGNIFICANCE

VEGF accurately reflects neovascularization in peri-implantitis that was expressed in contact zones toward implant surface without specific histopathological patter variation around TPs. VEGF answered requests for biomarker of peri-implantitis but further research is necessary to decrypt its exact underlying cause.

Biomimetic HA-GO implant coating for enhanced osseointegration via macrophage M2 polarization-induced osteo-immunomodulation

The pro-inflammatory/anti-inflammatory polarized phenotypes of macrophages (M1/M2) can be used to predict the success of implant integration. Hence, activating and inducing the transformation of immunocytes that promote tissue repair appears to be a highly promising strategy for facilitating osteo-anagenesis. In a previous study, titanium implants were coated with a graphene oxide-hydroxyapatite (GO-HA) nanocomposite via electrophoretic deposition, and the osteogenic differentiation of bone marrow mesenchymal stem cells (BMSCs) was found to be significantly enhanced when the GO content was 2wt%. However, the effectiveness of the GO-HA nanocomposite coating in modifying the in vivo immune microenvironment still remains unclear. In this study, the effects of GO-HA coatings on osteogenesis were investigated based on the GO-HA-mediated immune regulation of macrophages. The HA-2wt%GO nanocomposite coatings exhibited good biocompatibility and favored M2 macrophage polarization. Meanwhile, they could also significantly upregulate IL-10 (anti-inflammatory factor) expression and downregulate TNF-α (pro-inflammatory factor) expression. Additionally, the microenvironment, which was established by M2 macrophages, favored the osteogenesis of BMSCs both in vivo and in vitro. These findings show that the GO-HA nanocomposite coating is a promising surface-modification material. Hence, this study provides a reference for the development of next-generation osteoimmunomodulatory biomaterials.

A review in titanium-zirconium binary alloy for use in dental implants: Is there an ideal Ti-Zr composing ratio?

Binary titanium-zirconium alloys have been studied as promising alternatives for Ti implants. The commercial Ti-15Zr alloy (Roxolid, Straumann) has been the major subject of numerous binary Ti-Zr alloys-related studies and has gained wide recognition in laboratory studies and clinical practices. However, binary Ti-Zr alloys of other composition ratios are still being investigated by researchers. This review aims to provide information on the potential of binary Ti-Zr alloys other than Ti-15Zr as implant materials in terms of mechanical strengths, chemical or electrochemical corrosion resistance capabilities, and biological performances. In addition, in this review, the Ti-15Zr alloy is discussed only when compared with other binary Ti-Zr alloys. From the included 26 studies, it is confirmed that the mechanical, chemical, electrochemical, and biological properties of Ti-Zr alloys are related to the Ti and Zr composition ratio in the alloy, phase, manufacturing process, and surface treatment. Among the studied alloys, α-or α' phase-Ti-5 wt, 45 wt/30at, and 50 wt. %Zr exhibited relatively more promising results for further investigation. More research is necessary to evaluate the potential for future use of these materials for implants.

Dental implant material related changes in molecular signatures in peri-implantitis - A systematic review of omics in-vivo studies

OBJECTIVE

Titanium particles have been shown in in-vitro studies to lead to the activation of specific pathways, this work aims to systematically review in- vivo studies examining peri-implant and periodontal tissues at the transcriptome, proteome, epigenome and genome level to reveal implant material-related processes favoring peri-implantitis development investigated in animal and human trials.

METHODS

Inquiring three literature databases (Medline, Embase, Cochrane) a systematic search based on a priori defined PICOs was conducted: '-omics' studies comparing molecular signatures in healthy and infected peri-implant sites and/or healthy and periodontitis-affected teeth in animals/humans. After risk of bias assessments, lists of differentially expressed genes and results of functional enrichment analyses were compiled whenever possible.

RESULTS

Out of 2187 screened articles 9 publications were deemed eligible. Both healthy and inflamed peri-implant tissues showed distinct gene expression patterns compared to healthy/diseased periodontal tissues in animal (n = 4) or human studies (n = 5), with immune response, bone metabolism and oxidative stress being affected the most. Due to the lack of available re-analyzable data and inconsistency in methodology of the eligible studies, integrative analyses on differential gene expression were not applicable CONCLUSION: The differences of transcriptomic signatures in between peri-implant lesions compared to periodontal tissue might be related to titanium particles arising from dental implants and are in line with the in-vitro data recently published by our group. Nevertheless, limitations emerge from small sample sizes of included studies and insufficient publication of re-analyzable data.

Titanium particles in peri-implantitis: distribution, pathogenesis and prospects

Peri-implantitis is one of the most important biological complications in the field of oral implantology. Identifying the causative factors of peri-implant inflammation and osteolysis is crucial for the disease's prevention and treatment. The underlying risk factors and detailed pathogenesis of peri-implantitis remain to be elucidated. Titanium-based implants as the most widely used implant inevitably release titanium particles into the surrounding tissue. Notably, the concentration of titanium particles increases significantly at peri-implantitis sites, suggesting titanium particles as a potential risk factor for the condition. Previous studies have indicated that titanium particles can induce peripheral osteolysis and foster the development of aseptic osteoarthritis in orthopedic joint replacement. However, it remains unconfirmed whether this phenomenon also triggers inflammation and bone resorption in peri-implant tissues. This review summarizes the distribution of titanium particles around the implant, the potential roles in peri-implantitis and the prevalent prevention strategies, which expects to provide new directions for the study of the pathogenesis and treatment of peri-implantitis.

Quantification of titanium and zirconium elements in oral mucosa around healthy dental implants: a case-control pilot study

OBJECTIVES

Metallic particles are detected in different sites of the oral cavity, mainly in patients with peri-implantitis lesions. The aim of this pilot study was to analyze the levels of titanium and zirconium elements in the oral mucosa around healthy implants and to investigate the impact of titanium exogenous contamination on the measurements.

MATERIALS AND METHODS

Forty-one participants were included in this three-phase study. Two groups of subjects were defined according to presence of titanium or zirconia implants (n: 20) or without any implants nor metallic restorations (n:21). Thirteen patients (n: 5 with zirconia implant; n: 3 with titanium implants; n: 5 control group) took part to the first part designed to optimize and validate the method of detecting titanium (Ti) and zirconium (Zr) elements in the oral mucosa and gingival tissues by the Inductively Coupled Plasma Mass Spectrometry (ICPMS). The second phase compared the levels of Ti and Zr concentrations in patients with implants (n: 12) and without implants (n: 6) who were controlled for their intake of titanium dioxide (TiO2). The last step included ten control subjects without any metallic devices to measure the concentration of Ti and Zr before and after having candies containing TiO2.

RESULTS

In the first phase, concentrations of Ti and Zr were below the limit of detection (LOD) in most cases, 0.18 μg/L and 0.07 μg/L respectively. In the titanium group, two out of three subjects displayed concentrations above the LOD, 0.21 μg/L and 0.66 μg/L. Zr element was only found in patients with zirconia implants. After controlling the intake of TiO2, all concentrations of Ti and Zr were below the limit of quantification (LOQ). Moreover, in patients with no implants, the Ti concentration in gingiva cells was superior for 75% of the samples after having a TiO2 diet.

CONCLUSIONS

Zirconium was only found in patients with zirconia implants, whereas titanium was detected in all groups even in subjects with no titanium implants. Zirconium and titanium elements were not detected in patients who were controlled for their intake of food and their use of toothpaste irrespective of the presence of implants or not. For 70% of the patients, the titanium detection was directly influenced by the intake of TiO2 contained candies.

CLINICAL RELEVANCE

When analyzing titanium particles, it is necessary to pay attention to the risk of contamination bias brought by external products. When this parameter was controlled, no titanium particles were detected around clinically healthy implants.

Fit and forget: The future of dental implant therapy via nanotechnology

Unlike orthopedic implants, dental implants require the orchestration of both osseointegration at the bone-implant interface and soft-tissue integration at the transmucosal region in a complex oral micro-environment with ubiquitous pathogenic bacteria. This represents a very challenging environment for early acceptance and long-term survival of dental implants, especially in compromised patient conditions, including aged, smoking and diabetic patients. Enabling advanced local therapy from the surface of titanium-based dental implants via novel nano-engineering strategies is emerging. This includes anodized nano-engineered implants eluting growth factors, antibiotics, therapeutic nanoparticles and biopolymers to achieve maximum localized therapeutic action. An important criterion is balancing bioactivity enhancement and therapy (like bactericidal efficacy) without causing cytotoxicity. Critical research gaps still need to be addressed to enable the clinical translation of these therapeutic dental implants. This review informs the latest developments, challenges and future directions in this domain to enable the successful fabrication of clinically-translatable therapeutic dental implants that would allow for long-term success, even in compromised patient conditions.

Free titanium particles and P. gingivalis lipopolysaccharide create a potentially synergistical effect in a periimplantitis model

OBJECTIVE

Our aim was to examine the effect of titanium particles and lipopolysaccharide (LPS) from P. gingivalis on the inflammatory profile expression of human gingival fibroblasts (hGFs), cultured on rough titanium discs, in an in vitro peri-implantitis simulation.

DESIGN

Human gingival fibroblasts cultured on SLA and TCP surfaces were challenged with LPS, titanium particles or both. At 24, 48 and 72 h after treatment, MTT assay was performed to assess cell proliferation. FDA/PI staining was performed for the same time periods, in order to evaluate cell viability/apoptosis. At 5 and 7 days after the treatment, qPCR was performed to assess gene expressions of IL-6, IL-8 and COL1A1, as well as SEM on titanium discs.

RESULTS

All groups presented a significant increase of their population between the time periods of examination. Regarding the interleukin gene expression, the combination of LPS and particles significantly increased the levels of Interleukin-8. Treatment with LPS and particles also induced a significant increase of Interleukin-6 and collagen. FDA/PI microscopy has revealed several apoptotic cells in the treatment groups. SEM micrographs have shown the difficulty of hGFs to adhere on rough surfaces.

CONCLUSIONS

The combination of titanium particles and LPS significantly upregulated the expression of IL-6, IL-8 and Col-1a. It appears that particles may arouse similar reactions to the endotoxin, while synergistically intensifying it.

The Progress in Tribocorrosion Research (2010-21): Focused on the Orthopedics and Dental Implants

Tribocorrosion is an integration of two areas-tribology and corrosion. It can be defined as the material degradation caused by the combined effect of corrosion and tribological process at the material interfaces. Significant development has occurred in the field of tribocorrosion over the past years. This development is due to its applications in various fields, such as aerospace, marine, biomedical, and space. Focusing on biomedical applications, tribocorrosion finds its applications in the implants used in cardiovascular, spine, orthopedics, trauma, and dental areas. It was reported that around 7.2 million Americans are living with joint implants. Implant surgery is a traumatic and expensive procedure. Tribocorrosion can affect the lifespan of the implants, thus leading to implant failure and a potential cause of revision surgery. Hence, it is essential to understand how tribocorrosion works, its interaction with the implants, and what procedures can be implemented to protect materials from tribocorrosion. This paper discusses how tribocorrosion research has evolved over the past 11 years (2010-2021). This is a comprehensive overview of tribocorrosion research in biomedical applications.

Biomaterial engineering surface to control polymicrobial dental implant-related infections: focusing on disease modulating factors and coatings development

INTRODUCTION

Peri-implantitis is the leading cause of dental implant loss and is initiated by a polymicrobial dysbiotic biofilm formation on the implant surface. The destruction of peri-implant tissue by the host immune response and the low effectiveness of surgical or non-surgical treatments highlight the need for new strategies to prevent, modulate and/or eliminate biofilm formation on the implant surface. Currently, several surface modifications have been proposed using biomolecules, ions, antimicrobial agents, and topography alterations.

AREAS COVERED

Initially, this review provides an overview of the etiopathogenesis and host- and material-dependent modulating factors of peri-implant disease. In addition, a critical discussion about the antimicrobial surface modification mechanisms and techniques employed to modify the titanium implant material is provided. Finally, we also considered the future perspectives on the development of antimicrobial surfaces to narrow the bridge between idea and product and favor the clinical application possibility.

EXPERT OPINION

Antimicrobial surface modifications have demonstrated effective results; however, there is no consensus about the best modification strategy and in-depth information on the safety and longevity of the antimicrobial effect. Modified surfaces display recurring challenges such as short-term effectiveness, the burst release of drugs, cytotoxicity, and lack of reusability. Stimulus-responsive surfaces seem to be a promising strategy for a controlled and precise antimicrobial effect, and future research should focus on this technology and study it from models that better mimic clinical conditions.

Effects of NLRP3 on implants placement

Bone stability is precisely controlled by osteoclast-mediated bone resorption and osteoblast-mediated bone formation. When the balance is broken, the integrity of the bone structure will be destroyed. Inflammasomes are important protein complexes in response to pathogen-related molecular models or injury-related molecular models, which can promote the activation and secretion of proinflammatory cytokines and activate a local inflammatory response. NOD-like receptor thermal protein domain associated protein (NLRP) 3 inflammasome can promote bone resorption through the activation of the proinflammatory cytokines interleukin (IL)-1β, IL-18 and the induction of caspase-1-mediated pyroptosis. Inhibiting the production of NLRP3 inflammasome may be beneficial to improve comfort and bone stability. The presence of metal particles and microorganisms around implants can activate NLRP3 and promote bone absorption. NLRP3 inflammasome plays an important role in the maintenance of bone stability around implants, however, most studies focus on orthopedic implants and periodontitis. This article reviews the effects of NLRP3 inflammasome on bone formation, resorption and pain induced by implants, and the possibility of NLRP3 as a target for preventing peri-implantitis is discussed.

Dental Implants and Implant Coatings: A Focus on Their Toxicity and Safety

Dental implants are medical devices that are surgically inserted into the patient's jawbone by an orthodontist to act as roots of missing teeth. After the implantation, the maxilla or mandible integrates with the surface of the dental implant. This process, called "osseointegration," is an important period to ensure the long-term use of dental implants and prevent implant failures. Metal implants are the most used implant materials. However, they have disadvantages such as corrosion, metal ion release from metal implant surfaces and associated toxicity. To avoid these adverse effects and improve osseointegration, alternative dental implant materials such as ceramics, polymers, composites, and novel surface modification technologies have been developed. The safety of these materials are also of concern for toxicologists. This review will give general information about dental implant materials, osseointegration and successful implantation process. Moreover, we will focus on the new surface coatings materials for of dental implants and their toxicity and safety concerns will be discussed.

Enhanced Corrosion Resistance and Local Therapy from Nano-Engineered Titanium Dental Implants

Titanium is the ideal material for fabricating dental implants with favorable biocompatibility and biomechanics. However, the chemical corrosions arising from interaction with the surrounding tissues and fluids in oral cavity can challenge the integrity of Ti implants and leach Ti ions/nanoparticles, thereby causing cytotoxicity. Various nanoscale surface modifications have been performed to augment the chemical and electrochemical stability of Ti-based dental implants, and this review discusses and details these advances. For instance, depositing nanowires/nanoparticles via alkali-heat treatment and plasma spraying results in the fabrication of a nanostructured layer to reduce chemical corrosion. Further, refining the grain size to nanoscale could enhance Ti implants' mechanical and chemical stability by alleviating the internal strain and establishing a uniform TiO₂ layer. More recently, electrochemical anodization (EA) has emerged as a promising method to fabricate controlled TiO₂ nanostructures on Ti dental implants. These anodized implants enhance Ti implants' corrosion resistance and bioactivity. A particular focus of this review is to highlight critical advances in anodized Ti implants with nanotubes/nanopores for local drug delivery of potent therapeutics to augment osseo- and soft-tissue integration. This review aims to improve the understanding of novel nano-engineered Ti dental implant modifications, focusing on anodized nanostructures to fabricate the next generation of therapeutic and corrosion-resistant dental implants. The review explores the latest developments, clinical translation challenges, and future directions to assist in developing the next generation of dental implants that will survive long-term in the complex corrosive oral microenvironment.

Ion release and local effects of titanium metal particles from dental implants: An experimental study in rats

BACKGROUND

The objective of this study was to evaluate the accumulation of ions in blood and organs caused by titanium (Ti) metal particles in a mandibular defect in rats, together with a description of the local reaction of oral tissues to this Ti alloy debris.

METHODS

Twenty Sprague-Dawley rats were randomly distributed into three groups: an experimental group with a mandibular bone defect filled with metallic debris obtained by implantoplasty; a positive control group; and a negative control group. Thirty days after surgery, the rats were euthanized and perilesional tissue surrounding the mandibular defect was removed, together with the lungs, spleen, liver, and brain. Two blood samples were collected: immediately before surgery and before euthanasia. The perilesional tissue was histologically analyzed using hematoxylin-eosin staining, and Ti, aluminum, and vanadium ion concentrations in blood and organs were measured by TQ-ICP-MS. Descriptive and bivariate analyses of the data were performed.

RESULTS

All rats with implanted metal debris showed metal particles and a bone fracture callus on the osseous defect. The metal particles were surrounded by a foreign body reaction characterized by the presence of histiocytes and multinucleated giant cells (MNGCs). The experimental group had a significant higher concentration of Ti ions in all studied organs except lung tissue (p < 0.05). In addition, there were more V ions in the brain in the experimental group (p = 0.008).

CONCLUSIONS

Although further studies are required to confirm the clinical relevance of these results, Ti metal particles in the jaw might increase the concentration of metal ions in vital organs and induce a foreign body reaction.

Dental implant material related changes in molecular signatures in peri-implantitis - A systematic review and integrative analysis of omics in-vitro studies

OBJECTIVE

Since peri-implantitis differs clinically and histopathologically from periodontitis, implant wear debris is considered to play a role in the destructive processes. This work aims to systematically review if titanium particles affect oral-related cells through changes in molecular signatures (e.g., transcriptome, proteome, epigenome), thereby promoting peri-implantitis.

METHODS

Leveraging three literature databases (Medline, Embase, Cochrane) a systematic search based on a priori defined PICOs was conducted: '-omics' studies examining titanium exposure in oral-related cells. After risk of bias assessments, lists of differentially expressed genes, proteins, and results of functional enrichment analyses were compiled. The significance of overlapping genes across multiple studies was assessed via Monte Carlo simulation and their ranking was verified using rank aggregation.

RESULTS

Out of 2104 screened articles we found 12 eligible publications. A significant overlap of gene expression in oral-related cells exposed to titanium particles was found in four studies. Furthermore, changes in biological processes like immune/inflammatory or stress response as well as toll-like receptor (TLR) and mitogen-activated protein kinase (MAPK) signaling pathways were linked to titanium in transcriptome and proteome studies. Epigenetic changes caused by titanium were detected but inconsistent.

CONCLUSION

An influence of titanium implant wear debris on the development and progression of peri-implantitis is plausible but needs to be proven in further studies. Limitations arise from small sample sizes of included studies and insufficient publication of re-analyzable data.

The progress in titanium alloys used as biomedical implants: From the view of reactive oxygen species

Titanium and Titanium alloys are widely used as biomedical implants in oral and maxillofacial surgery, due to superior mechanical properties and biocompatibility. In specific clinical populations such as the elderly, diabetics and patients with metabolic diseases, the failure rate of medical metal implants is increased significantly, putting them at increased risk of revision surgery. Many studies show that the content of reactive oxygen species (ROS) in the microenvironment of bone tissue surrounding implant materials is increased in patients undergoing revision surgery. In addition, the size and shape of materials, the morphology, wettability, mechanical properties, and other properties play significant roles in the production of ROS. The accumulated ROS break the original balance of oxidation and anti-oxidation, resulting in host oxidative stress. It may accelerate implant degradation mainly by activating inflammatory cells. Peri-implantitis usually leads to a loss of bone mass around the implant, which tends to affect the long-term stability and longevity of implant. Therefore, a great deal of research is urgently needed to focus on developing antibacterial technologies. The addition of active elements to biomedical titanium and titanium alloys greatly reduce the risk of postoperative infection in patients. Besides, innovative technologies are developing new biomaterials surfaces conferring anti-infective properties that rely on the production of ROS. It can be considered that ROS may act as a messenger substance for the communication between the host and the implanted material, which run through the entire wound repair process and play a role that cannot be ignored. It is necessary to understand the interaction between oxidative stress and materials, the effects of oxidative stress products on osseointegration and implant life as well as ROS-induced bactericidal activity. This helps to facilitate the development of a new generation of well-biocompatible implant materials with ROS responsiveness, and ultimately prolong the lifespan of implants.

Impact of Metal Particles Released during Ultrasonic Scaling of Titanium Surfaces on Human Gingival Fibroblasts

PURPOSE

Metal particles found in tissues around dental implants have been proposed to play a pathogenic role in peri-implantitis. Ultrasonic scaling has been suggested as a mechanism by which these particles can be inadvertently released into surrounding tissues. Furthermore, risk factors like diabetes can result in exacerbation of this inflammatory condition. The current study aimed to analyze metal particles released from titanium surfaces during ultrasonic scaling and their impact on pro-inflammatory cytokine production by human gingival fibroblasts.

METHODS

Metal particles generated from ultrasonic scaling of titanium discs using two different tips (metal and poly-etheretherketone tips) were characterized using scanning electron microscopy and elemental analysis. Endotoxin levels and Human gingival fibroblast viability, in the presence commercial and ultrasonically generated particles were determined. Fibroblasts, cultured in high or low glucose growth medium, were incubated with commercial titanium particles or ultrasonically generated particles in the presence or absence of interluekin-1β. Interleukin 6 and interleukin 8 production were then quantified using Enzyme linked immunosorbent assay.

RESULTS

Analysis of particles after scaling of titanium discs showed significant levels of titanium particles. Commercial titanium particles and generated particles had no effect of fibroblast viability. Endotoxin levels of all particles were too low to stimulate HGF cells. IL-1β significantly stimulated IL-6 and IL-8 production. However, commercial, and generated particles generally had no significant effect on IL- 6 and IL-8 production.

CONCLUSION

Our study concluded that particles generated during ultrasonic scaling had no significant effect on viability of HGF cells and cytokine production.

Comparison of the Biological Behavior and Topographical Surface Assessment of a Minimally Invasive Dental Implant and a Standard Implant: An In Vitro Study

The current study aimed to assess the topographical and physical properties of a minimally invasive implant (MagiCore®: MC®, InnosBioSurg, IBS) and to evaluate its biological behavior compared to a gold standard implant (NobelParallel™: NB™, Nobel Biocare™). After surface characterization, the biological behavior assessment was conducted regarding human gingival fibroblasts (hGF) and osteoblast-like cells (MG63). Roughness values for NBTM were Ra = 1.28 µm and for MC® they were Ra = 2.02 µm. Alamar BlueTM assay LIVE/DEADTM staining results indicated equivalent biological development regarding both cell types for the two implants. Significant enhancement was found for hGF ALP activity in the presence of the two tested implants in a time-dependent manner from day 7 to day 14 (** p < 0.01). Alizarin red staining demonstrated significant calcium deposition enhancement when cells were interfaced with the NB™ compared to the MC® implant (** p < 0.05). Moreover, SEM and confocal imaging revealed good cell adhesion with a denser cellular layer on the MC® than the NB™ surface. The MC® cytocompatibility was ranked as equivalent to the gold standard implant despite the surface properties differences. These findings provide new insights about the minimally invasive implant’s biological behavior and its potential clinical implication in different implantology situations.

An in vivo toxicity assessment of piezoelectric sodium potassium niobate [NaxK1-xNbO3 (x = 0.2-0.8)] nanoparticulates towards bone tissue engineering approach

One of the recent challenges in the design/development of prosthetic orthopedic implants is to address the concern of local/systemic toxicity of debris particles, released due to wear or degradation. Such debris particles often lead to inflammation at the implanted site or aseptic loosening of the prosthesis which results in failure of the implant during long run. Several in vitro studies demonstrated the potentiality of piezoelectric sodium potassium niobate [Na_xK_1-xNbO₃ (x = 0.2, 0.5, 0.8), NKN] as an emerging next-generation polarizable orthopedic implant. In this perspective, we performed an in vivo study to examine the local and systemic toxicity of NKN nanoparticulates, as a first report. In the present study, male Wistar rats were intra-articularly injected to the knee joint with 100 μl of NKN nanoparticulates (25 mg/ml in normal saline). After 7 days of exposure, the histopathological analyses demonstrate the absence of any inflammation or dissemination of nanoparticulates in vital organs such as heart, liver, kidney and spleen. The anti-inflammatory cytokines (IL-4 and IL-10) profile analyses suggest the increased anti-inflammatory response in the treated rats as compared to non-injected (control) rats, preferably for the sodium and potassium rich NKN i.e., Na_0.8K_0.2NbO₃ and Na_0.2K_0.8NbO₃. The biochemical analyses revealed no pathological changes in the liver and kidney of particulate treated rats. The present study is the first proof to confirm the non-toxic nature of NKN nanoparticulates which provides a step forward towards the development of prosthetic orthopedic implants using biocompatible piezoelectric NKN ceramics.

Electrogalvanism in Oral Implantology: A Systematic Review

Purpose

The objective of this work is to study galvanic corrosion of different couples of prosthetic and implant alloys through the realization of a systematic review.

Materials and Methods

An electronic search was performed on Pubmed, Google Scholar, Scopus, ScienceDirect, EbscoHost, and Web of Science for published studies related to electrogalvanism in oral implantology. The keywords used were “dental implants” and “galvanic corrosion.” Two independent readers read the scientific articles.

Results

From 65 articles initially identified, only 19 articles met the eligibility criteria. The evaluation of the selected articles allowed us to determine the parameters compared, such as the resistance to galvanic corrosion, the influence of fluorine and pH on the electrochemical behavior, and the release of metal ions and their cytotoxicity. Indeed, Ti6Al4V and precious alloys coupled to titanium were found to be the most resistant to galvanic corrosion, followed by cobalt-chromium alloys and nickel-chromium alloys which were least resistant. This resistance decreases with increasing fluorine concentration and with decreasing pH of the environment. Discussion. The implant-prosthetic system's galvanic resistance is influenced by many intrinsic factors: alloy composition and surface condition, as well as extrinsic factors such as pH variations and amount of fluorine. The effects of oral electrogalvanism are essentially the result of two main criteria: effects due to electric currents generated by corrosion and effects due to the release of metal ions by corrosion.

Conclusion

To avoid this phenomenon, it is wise to follow the proposed recommendations such as the use of the minimum of distinct metals as much as possible, favoring the commercially pure titanium implant of Ti6Al4V, opting for the choice of couples, titanium/titanium, favoring daily mouthwashes of 227 ppm of fluoride, and avoiding fluorinated acid solutions.

Influence of epigenetics on periodontitis and peri-implantitis pathogenesis

Periodontitis is a disease characterized by tooth-associated microbial biofilms that drive chronic inflammation and destruction of periodontal-supporting tissues. In some individuals, disease progression can lead to tooth loss. A similar condition can occur around dental implants in the form of peri-implantitis. The immune response to bacterial challenges is not only influenced by genetic factors, but also by environmental factors. Epigenetics involves the study of gene function independent of changes to the DNA sequence and its associated proteins, and represents a critical link between genetic and environmental factors. Epigenetic modifications have been shown to contribute to the progression of several diseases, including chronic inflammatory diseases like periodontitis and peri-implantitis. This review aims to present the latest findings on epigenetic influences on periodontitis and to discuss potential mechanisms that may influence peri-implantitis, given the paucity of information currently available.

The Role of Titanium Particles and Ions in the Pathogenesis of Peri-Implantitis

Titanium (Ti) particles and ions have been investigated in recent years as important factors in the pathogenesis of peri-implantitis. However, their role in the pathogenesis is yet to be fully understood. A review of pertinent literature was performed in various databases to determine the current position of Ti particles and ions role in the pathogenesis of peri-implantitis. There are several in vitro, preclinical and clinical published studies that have addressed the role of Ti particles and ions in the pathogenesis of peri-implantitis. These studies explored the effect of Ti particles and ions in the pathogenesis of peri-implantitis with respect to foreign body reaction, cellular response, epigenetic mechanisms, namely DNA methylation, and the oral microbiome. Studies have shown that the release of Ti particles/ions during implant insertion, early healing stages, late healing stages, and treatments during peri-implantitis might contribute to peri-implantitis through different mechanisms, such as foreign body reaction, cellular response, DNA methylation, and shaping the oral microbiome by increasing dysbiosis. However, further studies are needed to elucidate the complex interactions between all these mechanisms and Ti particles/ions in the pathogenesis and progression of peri-implantitis.

The role of bacterial corrosion on recolonization of titanium implant surfaces: An in vitro study

BACKGROUND

Inflammation triggered by bacterial biofilms in the surrounding tissue is a major etiological factor for peri-implantitis and subsequent implant failure. However, little is known about the direct effects of bacterial corrosion and recolonization on implant failure PURPOSE: To investigate the influence of oral commensals on bacterial corrosion and recolonization of titanium surfaces.

MATERIALS AND METHODS

Streptococcus sanguinis (S. sanguinis) and Porphyromonas gingivalis (P. gingivalis), which are key bacteria in oral biofilm formation, were cultured on commercially pure titanium and titanium-aluminum-vanadium (Ti6Al4V) plates in artificial saliva/brain heart infusion medium under aerobic or anaerobic conditions. Biofilm formation was examined after 7 and 21 days by crystal violet and live/dead staining. Titanium ions released into culture supernatants were analyzed over a period of 21 days by atomic absorption spectrometry. Visual changes in surface morphology were investigated using scanning electron microscopy. Biofilm formation on sterilized, biocorroded, and recolonized implant surfaces was determined by crystal violet staining.

RESULTS

S. sanguinis and P. gingivalis formed stable biofilms on the titanium samples. Bacterial corrosion led to a significant increase in titanium ion release from these titanium plates (p < 0.01), which was significantly higher under aerobic conditions on pure titanium (p ≤ 0.001). No obvious morphological surface changes, such as pitting and discoloration, were detected in the titanium samples. During early biofilm formation, the addition of titanium ions significantly decreased the number of live cells. In contrast, a significant effect on biofilm mass was only detected with P. gingivalis. Bacterial corrosion had no influence on bacterial recolonization following sterilization of titanium and Ti6Al4V surfaces.

CONCLUSION

Bacterial corrosion differs between oral commensal bacteria and leads to increased titanium ion release from titanium plates. The titanium ion release did not influence biofilm formation or bacterial recolonization under in vitro conditions.

Effects of titanium dioxide microparticles and nanoparticles on cytoskeletal organization, cell adhesion, migration, and proliferation in human gingival fibroblasts in the presence of lipopolysaccharide

BACKGROUND AND OBJECTIVE

Titanium wear particles may participate in the etiology of peri-implantitis. However, the influence of titanium wear particles on biological behavior of human gingival fibroblasts (HGFs) in the presence of LPS is still not clear. The present study demonstrated the effects of titanium dioxide micro- and nanoparticles (TiO₂  MPs and NPs) on HGF cell viability, cytoskeletal organization, adhesion, migration, and proliferation in vitro, and LPS was used to mimic the in vivo condition.

METHODS

Primary HGFs were treated with TiO₂ MPs (primary particle size <5 μm, 0.1 mg/ml) and NPs (primary particle size <100 nm, 0.1 mg/ml) with or without 1 μg/ml LPS. The effects of TiO₂ MPs and NPs on HGFs cell viability was measured by CCK-8 assay. The proliferation of HGF was detected by Ki67 nuclear staining. The confocal laser scanning microscope (CLSM) was used to detect the internalization of TiO₂ MPs and NPs in HGFs as well as the arrangement of F-actin, vinculin, and vimentin organization. Wound healing assay and transwell assay were performed to measure the migration of HGFs induced by TiO₂ MPs and NPs. Cell adhesion was measured using fibronectin-coated plates. The relative mRNA and protein expression of adhesion relative protein such as focal adhesion kinase (FAK), fibronectin (FN), and type I collagen (COL1) were measured using quantitative RT-PCR and western blot analysis. One-way analysis of variance (ANOVA) and Student's t-test were used to analyze the statistical significance, and p < .05 was considered statistically significant.

RESULTS

TiO₂ NPs significantly inhibited HGF cell viability, proliferation, and migration compared with TiO₂ MPs group and control group. Compared with control group (2.64 ± 0.09), the mean absorbance of the cells in 1 mg/ml TiO₂ MPs group and 0.25 mg/ml TiO₂ NPs group were significantly decreased to 1.93 ± 0.33 (p < .05) and 2.22 ± 0.18 (p < .01), respectively. The cytoskeleton disruption was found in TiO₂ NPs group. The mRNA and protein expression were significantly downregulated by TiO₂ NPs. Furthermore, both TiO₂ NPs and MPs induced more adverse effects on HGFs in the presence of LPS.

CONCLUSION

Our results indicate that TiO₂ NPs but not TiO₂ MPs significantly disrupt the cytoskeletal organization and inhibited cell adhesion, migration, and proliferation of HGFs. However, in the presence of LPS, TiO₂ MPs, and TiO₂ NPs enhance these negative effects in HGFs. Titanium wear particles are probably involved in the initiation and progression of peri-implant diseases.

Study on the immunopathological effect of titanium particles in peri-implantitis granulation tissue: a case-control study

Objectives

To identify titanium particles (TPs) in biopsy specimens harvested from peri‐implantitis lesions and secondarily to study the histopathological characteristics in peri‐implantitis compared to periodontitis, in order to evaluate whether the presence of TPs could alter respective inflammatory patterns.

Material and methods

Biopsies containing granulation tissue were harvested during routine surgical treatment in 39 peri‐implantitis cases and 35 periodontitis controls. Serial sections were obtained using titanium‐free microtome blades. The first and last sections of the peri‐implantitis specimens were used for identification of TPs by scanning electron microscopy coupled with dispersive X‐ray spectrometry. Intermediate sections and periodontitis specimens were processed for descriptive histological study using haematoxylin–eosin staining and for immunohistochemical analysis using CD68, IL‐6, Nf‐kB and VEGF markers.

Results

TPs were identified in all peri‐implantitis specimens as free metal bodies interspersed within granulation tissue. However, presence of macrophages or multinucleated giant cells engulfing the TPs were not identified in any specimen. Peri‐implantitis granulations were characterized by a chronic inflammatory infiltrate rich in neutrophils. About half of peri‐implantitis patients exhibited a subacute infiltrate characterized with lymphocytes interweaved with neutrophils and eosinophils. When compared to periodontitis, peri‐implantitis tissues showed higher proportions of macrophages and a more intense neovascularization, based on significantly higher expression of CD68 and VEGF respectively.

Conclusion

TPs were identified in all peri‐implantitis specimens, but without evidencing any foreign body reaction suggestive for direct pathological effects of TPs. The peri‐implantitis granulation tissue was characterized by intense neovascularization and presence of a chronic inflammatory infiltrate dominated by plasma cells, neutrophils and macrophages.

Insights into tribofilm formation on Ti-6V-4Al in a bioactive environment: Correlation between surface modification and micro-mechanical properties

Ti-6Al-4V has been used as a surgical implant material for a long time because of its combination of strength, corrosion resistance and biocompatibility. However, there remains much that is not understood about how the surface reacts with the environment under tribocorrosion conditions. In particular, the conditions under which tribofilms form and their role on friction and wear are not clear. To evaluate the complicated nature of the dynamic surface microstructural changes on the wear track, high resolution transmission electron microscopy (TEM), scanning transmission electron microscope (STEM) and electron energy loss spectroscopy (EELS) have been used to characterise the structure and chemical composition of the tribofilm. Detailed analysis of the formation and structure of the tribofilm and the metal surface deformation behaviour were studied as a function of applied potential and the role of proteins in the lubricant. For the first time, graphitic and onion-like carbon structures from wear debris were found in the testing solution. The presence of carbon nanostructures in the tribocorrosion process and the formation of the tribofilm leads to an improved tribocorrosion behaviour of the system, in particular a reduction in wear and friction. A detailed, quantitative, analysis of surface deformation was undertaken, in particular, the geometrically necessary dislocation (GND) density was quantified using precession electron diffraction (PET). A clear correlation between applied potential, tribofilm formation and the surface strain was established. STATEMENT OF SIGNIFICANCE: The formation of tribofilm and microstructure modification of the Ti-6Al-4V surface during tribocorrosion in a physiological environment is not fully understood. In particular, the correlation between microstructural changes and electrochemical conditions is not clear. This study presents a detailed investigation of the structure and chemical composition of tribofilms at the nanoscale during tribocorrosion tests in simulated body fluid and gives a detailed and quantitative description of the evolved surface structure. A clear correlation between applied potential, tribofilm formation and the surface strain was established. Moreover, particular attention is paid to the wear debris particles captured from the lubricating solution, including nanocarbon onion structures. The implications for tribocorrosion of the alloy in its performance as an implant are discussed.

Success Factors of Additive Manufactured Root Analogue Implants

Dental implantation is an effective method for the treatment of loose teeth, but the threaded dental implants used in the clinic cannot match with the tooth extraction socket. A root analogue implant (RAI) has the congruence shape, which reduces the damage to bone and soft tissue. Additive manufacturing (AM) technologies have the advantages of high precision, flexibility, and easy operation, becoming the main manufacturing method of RAI in basic research. The purpose of this systematic review is to summarize AM technologies used for RAI manufacturing as well as the factors affecting successful implantation. First, it introduces the AM technologies according to different operating principles and summarizes the advantages and disadvantages of each method. Then the influences of materials, structure design, surface characteristics, implant site, and positioning are discussed, providing reference for designers and dentists. Finally, it addresses the gap between basic research and clinical application for additive manufactured RAIs and discusses the current challenges and future research directions for this field.

Insight Into Corrosion of Dental Implants: From Biochemical Mechanisms to Designing Corrosion-Resistant Materials

Purpose of Review

Despite advanced technologies to avoid corrosion of dental implants, the mechanisms toward the release of metals and their role in the onset of peri-implant diseases are still under-investigated. Effective knowledge on the etiopathogenesis of corrosive products and preventive strategies mitigating the risks for surface degradation are thus in dire need. This review aimed to summarize evidence toward biocorrosion in the oral environment and discuss the current strategies targeting the improvement of dental implants and focusing on the methodological and electrochemical aspects of surface treatments and titanium-based alloys.

Recent Findings

Recent studies suggest the existence of wear/corrosion products may correlate with peri-implantitis progress by triggering microbial dysbiosis, the release of pro-inflammatory cytokines, and animal bone resorption. Furthermore, current clinical evidence demonstrating the presence of metal-like particles in diseased tissues supports their possible role as a risk factor for peri-implantitis. For instance, to overcome the drawback of titanium corrosion, researchers are primarily focusing on developing corrosion-resistant alloys and coatings for dental implants by changing their physicochemical features.

Summary

The current state-of-art discussed in this review found corrosion products effective in affecting biofilm virulence and inflammatory factors in vitro. Controversial and unstandardized data are limitations, making the premise of corrosion products being essential for peri-implantitis onset. On the other hand, when it comes to the strategies toward reducing implant corrosion rate, it is evident that the chemical and physical properties are crucial for the in vitro electrochemical behavior of the implant material. For instance, it is foreseeable that the formation of films/coatings and the incorporation of some functional compounds into the substrate may enhance the material’s corrosion resistance and biological response. Nevertheless, the utmost challenge of research in this field is to achieve adequate stimulation of the biological tissues without weakening its protective behavior against corrosion. In addition, the translatability from in vitro findings to clinical studies is still in its infancy. Therefore, further accumulation of high-level evidence on the role of corrosion products on peri-implant tissues is expected to confirm the findings of the present review besides the development of better methods to improve the corrosion resistance of dental implants. Furthermore, such knowledge could further develop safe and long-term implant rehabilitation therapy.

Titanium surface with nanospikes tunes macrophage polarization to produce inhibitory factors for osteoclastogenesis through nanotopographic cues

Definitive prevention of inflammatory osteolysis around peri-implant bone tissue remains unestablished. M1 macrophages play a key role in the host defense against inflammatory osteolysis, and their polarization depends on cell shape. Macrophage polarization is controlled by environmental stimuli, particularly physicochemical cues and hence titanium nanosurface might tune macrophage polarization and function. This study determined whether titanium nanosurfaces with anisotropically patterned nanospikes regulates macrophage polarization for inhibiting osteoclast differentiation of osteoclast precursors. Alkaline-etching treatment with different protocols created two types of titanium nanosurfaces that had anisotropically patterned nanospikes with high or low distribution density, together with superhydrophilicity and the presence of hydroxyl groups. J774A.1 cells (mouse macrophage-like cell line), cultured on both titanium nanosurfaces, exhibited truly circulated shapes and highly expressed M1, but less M2, markers, without loss of viability. M1-like polarization of macrophages on both titanium nanosurfaces was independent of protein-mediated ligand stimulation or titanium surface hydrophilic or chemical status. In contrast, other smooth or micro-roughened titanium surfaces with little or no nanospikes did not activate macrophages under any culture conditions. Macrophage culture supernatants on both titanium nanosurfaces inhibited osteoclast differentiation of RAW264.7 cells (mouse osteoclast precursor cell line), even when co-incubated with osteoclast differentiation factors. The inhibitory effects on osteoclast differentiation tended to be higher in macrophages cultured on titanium nanosurfaces with denser nanospikes. These results showed that titanium nanosurfaces with anisotropically patterned nanospikes tune macrophage polarization for inhibiting osteoclast differentiation of osteoclast precursors, with nanotopographic cues rather than other physicochemical properties. STATEMENT OF SIGNIFICANCE: Peri-implant inflammatory osteolysis is one of the serious issues for dental and orthopedic implants. Macrophage polarization and function are key for prevention of peri-implant inflammatory osteolysis. Macrophage polarization can be regulated by the biomaterial's surface physicochemical properties such as hydrophilicity or topography. However, there was no titanium surface modification to prevent inflammatory osteolysis through immunomodulation. The present study showed for the first time that the titanium nanosurfaces with anisotropically patterned nanospikes, created by the simple alkali-etching treatment polarized macrophages into M1-like type producing the inhibitory factor on osteoclast differentiation. This phenomenon attributed to nanotopographic cues, but not hydrophilicity on the titanium nanosurfaces. This nanotechnology might pave the way to develop the smart implant surface preventing peri-implant inflammatory osteolysis through immunomodulation.

Superhydrophilic multifunctional nanotextured titanium dental implants: in vivo short and long-term response in a porcine model

Current clinical demand in dental implantology is for a multifunctional device with optimum mechanical properties, improved biocompatibility and bioactivity, and having differential interactions with cells and pathogenic agents. This would minimise bacterial infection, biofilm formation and modulate inflammation, leading to a fast and durable osseointegration. The present study intends to establish the multifunctional behaviour of surface modified titanium dental implants that are superhydrophilic, with unique micro-nano or nanoscale topographies, developed by a facile hydrothermal technique. Here, the short and long-term performances of these textured implants are tested in a split mouth design using a porcine model, in pre- and post-loaded states. Quantitative and qualitative analyses of the bone implant interphase are performed through μ-CT and histology. Parameters that evaluate bone mineral density, bone contact volume and bone implant contact reveal enhanced bone apposition with better long-term response for the nano and micro-nano textured surfaces, compared to the commercial microtextured implant. Concurrently, the nanoscale surface features on implants reduced bacterial attachment by nearly 90% in vivo, outperforming the commercial variant. This preclinical evaluation data thus reveal the superiority of nano/micro-nano textured designs for clinical application and substantiate their improved osseointegration and reduced bacterial adhesion, thus proposing a novel dental implant with multifunctional characteristics.

Alterations to Titanium Surface Depending on the Fluorides and Abrasives in Toothpaste

Fluoride and abrasives in toothpastes may cause corrosion and deterioration of the titanium used for implants and other prostheses. The purpose of this study was to investigate how the presence or absence and types of fluoride and abrasives affected the titanium surface texture. Brushing with toothpastes was performed on pure-titanium discs using an abrasive testing machine. Unprocessed titanium discs without brushing were used as control samples. Surface roughness, color, and gloss of titanium were measured and the differences compared with the control were analyzed. Additionally, titanium surfaces and abrasives in toothpastes were observed using a scanning electron microscope to compare the surface texture of each sample. Some toothpastes (abrasive+) significantly increased the difference in surface roughness, color, and gloss, compared with ultrapure water. Toothpaste (fluoride+/abrasive+) that had many polygonal abrasive particles led to the largest color differences and exhibited notable scratches and a larger number of contaminant- or corrosion-like black spots. In contrast, brushing with toothpaste without fluoride or abrasives (fluoride-/abrasive-) caused little change to the titanium surface. These results suggest that both fluoride and abrasives in toothpaste used for brushing may be factors that affect surface texture and corrosion resistance of titanium.

The Effect of Neutrophil-Derived Products on the Function of Leukocytes Obtained after Titanium Implantation in the Ovine Model

Simple Summary

Titanium is one of the most commonly used biomaterials for implantation as a part of the orthopedic procedures. However, this biomaterial can cause an excessive inflammatory response, even leading to rejection of the implant. Therefore, the aim of our study was to assess the overall organism response after insertion of Ti implant and the activity of neutrophils and monocyte-derived macrophages (MDM), to evaluate the possible negative effect of this biomaterial on the host cells. Our study revealed that insertion of the Ti implant did not evoke systemic inflammatory response or activation of leukocytes. Additionally, we evaluated the activity of neutrophils and MDM after stimulation with autologous neutrophil products, namely, antimicrobial neutrophil extract and neutrophil degranulation product as two potential regulators of inflammatory response. Antimicrobial neutrophil extract appeared to be a factor causing the decrease of secretory neutrophil response and polarization of MDM towards pro-resolving phenotype, whereas the neutrophil degranulation product acted as pro-inflammatory.

Abstract

Titanium (Ti) is currently the most common biomaterial used for orthopedic implants; however, these implants may cause deleterious immune response. To investigate the possible mechanisms involved in excessive inflammation, we assessed the activity of neutrophils and monocyte-derived macrophages (MDMs) during the insertion of the Ti implant in a sheep model. The study was conducted on 12 sheep, 4 of which were control animals and 8 were in the experimental group with inserted Ti implant. Neutrophil secretory response was estimated at two time points T0 before surgery and T1 1 h after implantation and was based on the release of enzymes from neutrophil granules and reactive oxygen and nitrogen species (RONS) generation. MDM function was evaluated 5 months after implantation, on the basis of RONS generation arginase activity and morphological changes. Moreover, the influence of some autologous neutrophil derived products, namely, antimicrobial neutrophil extract (ANE) and neutrophil degranulation products (DGP) on leukocytes was estimated. Our study revealed that Ti implant insertion did not cause any adverse effects up to 5 months after surgical procedure. Stimulation of neutrophil cultures with ANE decreased the enzyme release as well as superoxide generation. Treatment of MDM with ANE diminished superoxide and NO generation and increased arginase activity. On the other hand, MDM stimulated with DGP showed elevated superoxide and NO generation as well as decreased arginase activity. To summarize, ANE exerted an anti-inflammatory and pro-resolving effect on studied leukocytes, whereas DGP acted as pro-inflammatory.

Impact of tribocorrosion and titanium particles release on dental implant complications - A narrative review

Titanium particles as a product of degradation have been detected in periimplant oral tissues and it has been assumed that implants were the source of these particles. Periimplantitis sites had higher concentrations of particles in comparison to healthy implant sites. Several factors have been identified in the degradation of dental implant surface, such as mechanical wear, contact with chemical agents, and the effects of biofilm adhesion. Titanium particles silently prompt the immune-system activation and generate a pro-inflammatory response in macrophages, T lymphocytes and monocytes. During the activation, inflammatory cytokines are released including, granulocyte-macrophage colony-stimulating factor (GM-CSF), prostaglandin, and TNF-α, IL-1β, IL-6. The nanoparticles depict unique features such as high level of biological reactivity and potentially harmful compared to microparticles since they have a relatively greater surface area to volume ratio. Allergic response to titanium as a cause of implant failure has not been well documented. Evidence demonstrating biological complication due to titanium particles release includes peri-implant tissue inflammation that lead terminally to implant loss. There is a biological probability for a relation between the presence of titanium particles and ions, biological complication, and corrosion, but there is no justifiable evidence for unidirectional series of causative actions.

Comparison of Corrosion Products From Implant and Various Gold-Based Abutment Couplings: The Effect of Gold Plating

This study compared titanium (Ti), palladium (Pd), platinum (Pt), and gold (Au) ion release following induced accelerated tribocorrosion from three Au alloy abutment groups coupled with Ti implants over time; investigated contacting surface structural changes; and explored the effect of Au plating. Three abutment groups, G (n = 8, GoldAdapt, Nobel Biocare), N (n = 8, cast UCLA, Biomet3i), and P (n = 8, cast UCLA, Biomet3i, Au plated), coupled with implants (Nobel Biocare), immersed in 1% lactic acid, were cyclically loaded. Ions released (ppb) at T1, T2, and T3, simulating 3, 5, and 12 months of function, respectively, were quantified by inductively coupled plasma mass spectrometry (ICP-MS) and compared. Surface degradation and fretted particle composition after T3 were evaluated with scanning electron microscopy and energy-dispersive X-ray spectroscopy (SEM/EDX). ICP-MS data were nonparametric, expressed as medians and interquartile ranges. SEM/EDX showed pitting, crevice corrosion, and fretted particles on the components. Released ion concentrations in all groups across time significantly decreased for Pd (P < .001, median range: 1.70-0.09), Pt (P = .021, 0.55-0.00), and Au (P < .001, 1.01-0.00) and increased for Ti (P = .018, 2.49-5.84). Total Ti release was greater than other ions combined for G (P = .012, 9.86-2.30) and N (P < .001, 13.59-5.70) but not for P (P = .141, 8.21-3.53). Total Ti release did not differ between groups (P = .36) but was less variable across group P. On average, total ion release was 13.77 ppb (interquartile range 8.91-26.03 ppb) across the 12-month simulation. Tribocorrosion of Ti implants coupled with Au abutments in a simulated environment was evidenced by fretted particles, pitting, and crevice corrosion of the coupling surfaces and release of ions. More Ti was released compared with Pd, Pt, and Au and continued to increase with time. Abutment composition influenced ion release. Au-plated abutments appeared to subdue variation in and minimize high-concentration spikes of titanium.

Impact of titanium dioxide particle size on macrophage production of intracellular reactive oxygen species

OBJECTIVES

The aim of this study was to investigate the response of THP-1 monocyte-derived macrophages following exposure to titanium dioxide nanoparticles (TiO₂ NPs) and microparticles (TiO₂ MPs) in an in vitro system.

DESIGN

THP-1 monocytes were maintained in RPMI medium and transformed into M0 macrophages using Phorbol 12-myristate 13-acetate (PMA). TiO₂ particle size characterization was performed using scanning electron microscopy (SEM) and dynamic light scattering (DLS) technology. A viability study using an XTT assay was performed by treating THP-1-derived macrophages with TiO₂ NPs (<100 nm) and TiO₂ MPs (<5 μm) at concentrations ranging from 100, 50, 25, 12.5, 6.25 and 3.125 μg/mL. Macrophages were then treated with three different concentrations of NPs and MPs (5, 20 or 100 μg/mL) for 24 h, and ROS production and TiO₂ particle cellular uptake were measured using ROS assays and flow cytometry, respectively.

RESULTS

There was no significant change in the viability of THP-1 monocytes after treatment with TiO₂ NPs and MPs. The uptake of both particles was confirmed and showed an increase in ROS generation, and the MPs produced more ROS than NPs. The increase in ROS generation with NPs was concentration-dependent.

CONCLUSION

Uptake of TiO₂ NPs and MPs in macrophages at subcytotoxic levels generate ROS in a size- and dose-dependent manner.

Cytocompatibility of Ti-xZr alloys as dental implant materials

Ti-xZr (x = 5, 15, 25, 35, 45% wt%) alloys with low elastic modulus and high mechanical strength were fabricated as a novel implant material. The biocompatibility of the Ti-xZr alloys was evaluated by osteoblast-like cell line (MG63) in terms of cytotoxicity, proliferation, adhesion, and osteogenic induction using CCK-8 and live/dead cell assays, electron microscopy, and real-time PCR. The Ti-xZr alloys were non-toxic and showed superior biomechanics compared to commercially pure titanium (cpTi). Ti-45Zr had the optimum strength/elastic modulus ratio and osteogenic activity, thus is a promising to used as dental implants.

Effect of macrogeometry and bone type on insertion torque, primary stability, surface topography damage and titanium release of dental implants during surgical insertion into artificial bone

This study investigated the influence of implant macrogeometry and bone type on insertion torque (IT), primary stability (ISQ), surface topography damage, and the amount of titanium (Ti) released during insertion. Forty implants with different macrogeometries (Facility - Cylindrical with spiral-shaped threads; Alvim - Tapered with buttress-shaped threads) were inserted into artificial bone types I-II and III-IV. Surface morphology was evaluated by Scanning Electron Microscope (SEM) and roughness parameters with Laser Scanning Confocal Microscopy (LSCM) before and after insertion (AI). Implant macrogeometry was characterized by LSCM. The chemical composition of bone beds was determined by SEM associated with Energy Dispersive X-Ray Spectroscopy. The amount of Ti released was analyzed with Energy Dispersive X-Ray Fluorescence. Alvim had greater IT and ISQ than Facility. Bone types I-II require higher IT of implants. Alvim also had greater internal threads angle, higher initial roughness, and significant reduction of roughness AI, compared to Facility. The functional surface height reduced AI, especially in flank and valley of threads. Height of surface roughness of Alvim and Facility implants was similar AI. Implants surface morphology changes and metallic particles on bone beds were observed after implant insertion, mainly into bone types III-IV. Implants inserted into bone types I-II showed less surface damage. Alvim implants released more Ti (37.52 ± 25.03 ppm) than Facility (11.66 ± 28.55 ppm) on bone types III-IV. The implant macrogeometry and bone types affect IT, ISQ, surface damage, and Ti amount released during insertion. Alvim implants were more wear susceptible, releasing higher Ti concentration during insertion into bone types III-IV.

Impact of exogenous metal ions on peri-implant bone metabolism: a review

The development of effective methods to promote the osseointegration of dental implants by surface modification is an area of intense research in dental materials science. Exogenous metal ions present in the implant and surface modifications are closely related to the bone metabolism around the implant. In the complex oral microenvironment, the release of metal ions caused by continuous corrosion of dental implants has an unfavorable impact on the surrounding tissue, and then affects osseointegration, leading to bad results such as loosening and falling off in the late stage of the implant. Besides, these ions can even be distributed in distant tissues and organs. Currently, surface modification techniques are being developed that involve different processing technologies including the introduction of exogenous metal ions with different properties onto the surface of implants to improve performance. However, most metal elements have some level of biological toxicity and can only be used within a safe concentration range to exert the optimum biological effects on recipients. In this paper, we review the adverse effects of metal ions on osseointegration and highlight the emerging applications for metal elements in improving the performance of dental implants.

Overview of Antibacterial Strategies of Dental Implant Materials for the Prevention of Peri-Implantitis

As dental implants have become one of the main treatment options for patients with tooth loss, the number of patients with peri-implant diseases has increased. Similar to periodontal diseases, peri-implant diseases have been associated with dental plaque formation on implants. Unconventional approaches have been reported to remove plaque from infected implants, but none of these methods can completely and permanently solve the problem of bacterial invasion. Fortunately, the constant development of antibacterial implant materials is a promising solution to this situation. In this review, the development and study of different antibacterial strategies for dental implant materials for the prevention of peri-implantitis are summarized. We hope that by highlighting the advantages and limitations of these antimicrobial strategies, we can assist in the continued development of oral implant materials.

Effect of rosmarinic acid on differentiation and mineralization of MC3T3-E1 osteoblastic cells on titanium surface

Titanium (Ti) is a widely used biomaterial for dental implants because of its outstanding biocompatibility for hard tissues. Osseointegration, the interaction between implanted biomaterials and living cells in bone, is essential for successful implantation. Rosmarinic acid (RA) is a plant-derived phytochemical with low toxicity and side effects and has various effects that can be applied as a therapeutic substance. The MC3T3-E1 osteoblastic cells on the Ti surface in medium with or without 14 μg/ml RA were used to test RA effects on osteoblast differentiation, cell viability and mineralization during differentiation. RA treatment increased osteoblast differentiation, cell viability and mineralization in MC3T3-E1 osteoblastic cells on Ti surface during differentiation, upregulating Runx-2 and OPG, but downregulating RANKL. This study suggest that RA should be applied as an effective functional and therapeutic substance to enhance osseointegration of osteoblast cells by increasing differentiation, mineralization, and bone formation through the RANKL/RANK/OPG pathway during the differentiation in MC3T3-E1 osteoblastic cells on the Ti surface.