Modification of carbon nanotubes for preconcentration, separation and determination of trace-metal ions

Advancements in Improving Selectivity of Metal Oxide Semiconductor Gas Sensors Opening New Perspectives for Their Application in Food Industry

Volatile compounds not only contribute to the distinct flavors and aromas found in foods and beverages, but can also serve as indicators for spoilage, contamination, or the presence of potentially harmful substances. As the odor of food raw materials and products carries valuable information about their state, gas sensors play a pivotal role in ensuring food safety and quality at various stages of its production and distribution. Among gas detection devices that are widely used in the food industry, metal oxide semiconductor (MOS) gas sensors are of the greatest importance. Ongoing research and development efforts have led to significant improvements in their performance, rendering them immensely useful tools for monitoring and ensuring food product quality; however, aspects related to their limited selectivity still remain a challenge. This review explores various strategies and technologies that have been employed to enhance the selectivity of MOS gas sensors, encompassing the innovative sensor designs, integration of advanced materials, and improvement of measurement methodology and pattern recognize algorithms. The discussed advances in MOS gas sensors, such as reducing cross-sensitivity to interfering gases, improving detection limits, and providing more accurate assessment of volatile organic compounds (VOCs) could lead to further expansion of their applications in a variety of areas, including food processing and storage, ultimately benefiting both industry and consumers.

Impact of nanotechnology on progress of flow methods in chemical analysis: A review

In evolution of instrumentation for analytical chemistry as crucial technological breakthroughs should be considered a common introduction of electronics with all its progress in integration, and then microprocessors which was followed by a widespread computerization. It is seems that a similar role can be attributed to the introduction of various elements of modern nanotechnology, observed with a fast progress since beginning of this century. It concerns all areas of the applications of analytical chemistry, including also progress in flow analysis, which are being developed since the middle of 20th century. Obviously, it should not be omitted the developed earlier and analytically applied planar structures like lipid membranes or self-assembled monolayers They had essential impact prior to discoveries of numerous extraordinary nanoparticles such as fullerenes, carbon nanotubes and graphene, or nanocrystalline semiconductors (quantum dots). Mostly, due to catalytic effects, significantly developed surface and the possibility of easy functionalization, their application in various stages of flow analytical procedures can significantly improve them. The application of new nanomaterials may be used for the development of new detection methods for flow analytical systems in macro-flow setups as well as in microfluidics and lateral flow immunoassay tests. It is also advantageous that quick flow conditions of measurements may be helpful in preventing unfavorable agglomeration of nanoparticles. A vast literature published already on this subject (e.g. almost 1000 papers about carbon nanotubes and flow-injection analytical systems) implies that for this reviews it was necessary to make an arbitrary selection of reported examples of this trend, focused mainly on achievements reported in the recent decade.

Heavy Metals Removal from Aqueous Solutions by Multiwall Carbon Nanotubes: Effect of MWCNTs Dispersion

Carbon nanotubes (CNTs) are one of the most studied nanoparticles due to their physical, chemical and electronic properties. However, strong Van der Waals bonds, which promote CNTs aggregation are usually present, affecting their unique properties. Avoiding CNTs aggregation is one of the main difficulties when using these nanoparticles. Regarding the adsorption capacity of CNTs, the tendency of CNTs to aggregate decreases the surface area available to retain contaminants. One way to overcome this issue is by changing the surface energy of CNTs through chemical (covalent and noncovalent methods) or mechanical stabilization, but there is not yet a unique solution to solve this problem. In this work, a chemical noncovalent method (addition of surfactants) combined with mechanical energy (ultrasounds) was applied for CNTs stabilization, and the influence in heavy metal ions removal, Pb (II), Cu (II), Ni (II) and Zn (II), an area of high environmental relevance, was evaluated. It was proved that high amounts of metals could be removed from water during the first eighteen hours. Competitive adsorption between heavy metals, during adsorption tests with the simultaneous presence of all ions, was also studied and it was possible to prove that the electronegativity and atomic radius of cations influence their removal. Pb (II) and Cu (II) were the metals removed in higher percentages, and Ni (II) and Zn (II) were the metals less removed during competitive adsorption. Finally, the results obtained show that MWCNTs, if adequately dispersed, present a good solution for the treatment of water contaminated with highly toxic heavy metals, even when using very low concentrations of Multiwall Carbon Nanotubes (MWCNTs).

Preparation of multiwall carbon nanotube/urea-formaldehyde nanocomposite as a new sorbent in solid-phase extraction and its combination with deep eutectic solvent-based dispersive liquid-liquid microextraction for extraction of antibiotic residues in honey

A solid-phase extraction method combined with deep eutectic solvent-based dispersive liquid-liquid microextraction has been developed for the extraction of three antibiotics in honey samples prior to their determination by ion mobility spectrometry. In this method, first, a multiwall carbon nanotube/urea-formaldehyde nanocomposite was synthesized using co-precipitation polymerization method and then it was used as a sorbent for the analytes extraction from the samples. After that the adsorbed analytes were eluted from the sorbent using a water-miscible organic solvent. The collected elution solvent was mixed with tetrabutylammonium chloride:butanol deep eutectic solvent and the mixture was applied in the following microextraction method. The method provided low limits of detection and quantification in the ranges of 0.32-0.86 and 1.1-2.9 ng/g, respectively. The method had a proper repeatability expressed as relative standard deviation less than or equal to 9.1%. The validated method was successfully performed on different honey samples obtained from different producers.

Three-Dimensional Cathodes for Electrochemical Reduction of CO2: From Macro- to Nano-Engineering

Rising anthropogenic CO2 emissions and their climate warming effects have triggered a global response in research and development to reduce the emissions of this harmful greenhouse gas. The use of CO2 as a feedstock for the production of value-added fuels and chemicals is a promising pathway for development of renewable energy storage and reduction of carbon emissions. Electrochemical CO2 conversion offers a promising route for value-added products. Considerable challenges still remain, limiting this technology for industrial deployment. This work reviews the latest developments in experimental and modeling studies of three-dimensional cathodes towards high-performance electrochemical reduction of CO2. The fabrication-microstructure-performance relationships of electrodes are examined from the macro- to nanoscale. Furthermore, future challenges, perspectives and recommendations for high-performance cathodes are also presented.

Carbon Nanotubes (CNTs): A Potential Nanomaterial for Water Purification

Nanomaterials such as carbon nanotubes (CNTs) have been used as an excellent material for catalysis, separation, adsorption and disinfection processes. CNTs have grabbed the attention of the scientific community and they have the potential to adsorb most of the organic compounds from water. Unlike, reverse osmosis (RO), nanofiltration (NF) and ultrafiltration (UF) membranes aligned CNT membranes can act as high-flow desalination membranes. CNTs provide a relatively safer electrode solution for biosensors. The article is of the utmost importance for the scientists and technologists working in water purification technologies to eliminate the water crisis in the future. This review summarizes about the application of CNTs in water purification.

Recent Advances in Nanomaterials for Analysis of Trace Heavy Metals

In an effort to achieve high sensitivity analysis methods for ultra-trace levels of heavy metals, numerous new nanomaterials are explored for the application in preconcentration processes and sensing systems. Nanomaterial-based methods have proven to be effective for selective analysis and speciation of heavy metals in combination with spectrometric techniques. This review outlined the different types of nanomaterials applied in the field of heavy metal analysis, and concentrated on the latest developments in various new materials. In particular, the functionalization of traditional materials and the exploitation of bio-functional materials could increase the specificity to target metals. The hybridization of multiple materials could improve material properties, to build novel sensor system or achieve detection-removal integration. Finally, we discussed the future perspectives of nanomaterials in the heavy metal preconcentration and sensor design, as well as their respective advantages and challenges. Despite impressive progress and widespread attention, the development of new nanomaterials and nanotechnology is still hampered by numerous challenges, particularly in the specificity to the target and the anti-interference performance in complex matrices.

A retrospective and prospective of the use of bio- and nanomaterials for preconcentration, speciation, and determination of trace elements: a review spanning 25 years of research

This review covers the investigations carried out with my colleagues and students during the last 25 years aimed at the development of analytical procedures for the preconcentration and/or speciation analysis of trace and ultra-trace elements using bio- and nanosorbents employing different methodologies, analytical techniques, and instrumental approaches. In the last years, an important part of this research was based on the use of nanomaterials for preconcentration and/or speciation studies. For their properties, they constitute a break point in the evolution of analytical chemistry. Special attention was paid to carbon nanotubes (CNTs) that resulted effective sorbents in flow systems using different immobilization strategies to improve their sorption capabilities. They resulted unique tools for on-line solid-phase (micro)extraction methods providing the appropriate selectivity (clean-up) and sensitivity (preconcentration) to reach the expected levels of many elements in matrices of biological or environmental interest. The performance of the different substrates, their strengths and weaknesses for the determination of trace elements, and their species in different matrices by a variety of analytical techniques are discussed in detail, along with perspectives and possible challenges in future development. This survey contains 96 references and covers primarily the literature published over the last 25 years by our research group. Relevant publications on the topics discussed were also included.

Cotransport of Cu with Graphene Oxide in Saturated Porous Media with Varying Degrees of Geochemical Heterogeneity

Graphene oxide (GO) is likely to encounter heavy metals due to its widespread use and inevitable release into the subsurface environment, where the ubiquitous presence of iron oxides (e.g., hematite) would affect their interaction and transport. The present study aimed to investigate the cotransport of GO (20 mg L−1) and copper (0.05 mM CuCl2) in the presence of varying degrees of geochemical heterogeneity represented by iron oxide-coated sand fractions (ω = 0‒0.45) in water-saturated columns under environmentally relevant physicochemical conditions (1 mM KCl at pH 5.0‒9.0). The Langmuir-fitted maximum adsorption capacity of Cu2+ by GO reached 137.6 mg g−1, and the presence of 0.05 mM Cu2+ decreased the colloidal stability and subsequent transport of GO in porous media. The iron oxide coating was found to significantly inhibit the transport of GO and Cu-loaded GO in sand-packed columns, which can be explained by the favorable deposition of the negatively charged GO onto patches of the positively charged iron oxide coatings at pH 5.0. Increasing the solution pH from 5.0 to 9.0 promoted the mobility of GO, with the exception of pH 7.5, in which the lowest breakthrough of GO was observed. This is possibly due to the fact that the surface charge of iron oxide approaches zero at pH 7.5, suggesting that new “favorable” sites are available for GO retention. This study deciphered the complicated interactions among engineered nanomaterials, heavy metals, and geochemical heterogeneity under environmentally relevant physicochemical conditions. Our results highlight the significant role of geochemical heterogeneity, such as iron oxide patches, in determining the fate and transport of GO and GO-heavy metal association in the subsurface environment.

Magnetic-Dispersive Solid Phase Extraction Based on Graphene Oxide-Fe3O4 Nanocomposites Followed by High Performance Liquid Chromatography-Fluorescence for the Preconcentration and Determination of Terazosin Hydrochloride in Human Plasma

In the present study, a facile modified impregnation method was employed to synthesize superparamagnetic graphene oxide-Fe3O4 (GO-Fe3O4) nanocomposites. Based on the GO-Fe3O4 as adsorbent, a simple and fast magnetic-dispersive solid phase extraction followed by high performance liquid chromatography with fluorescence detection (M-dSPE-HPLC-FL) method was established and validated for the preconcentration and determination of terazosin hydrochloride (TRZ) in human plasma samples. The obtained nanomaterials were characterized by X-ray diffraction, Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive X-ray spectroscopy and vibrating sample magnetometry. Different parameters affecting the extraction efficiency, such as sample pH, amount of sorbent, extraction time, elution solvent and its volume and desorption time, were evaluated and optimized. The linearity of the proposed method was excellent over the range 0.3-50.0 ng mL-1 with an acceptable coefficient of determination (R2 = 0.9989). The limit of quantification and limit of detection were found to be 0.3 and 0.09 ng mL-1, respectively, and the preconcentration factor of 10 was achieved. Intra- and inter-day precision expressed as relative standard deviation (RSD %, n = 6) were between 2.2-3.8% and 4.7-6.4%, respectively. Accuracy, estimated by recovery assays, was 97.7-106.6% with RSD ≤ 5.2%. Ultimately, the applicability of the method was successfully confirmed by the extraction and determination of TRZ in human plasma samples.

Extraction of Metal Ions with Metal-Organic Frameworks

Metal-organic frameworks (MOFs) are crystalline porous materials composed of metal ions or clusters coordinated with organic linkers. Due to their extraordinary properties such as high porosity with homogeneous and tunable in size pores/cages, as well as high thermal and chemical stability, MOFs have gained attention in diverse analytical applications. MOFs have been coupled with a wide variety of extraction techniques including solid-phase extraction (SPE), dispersive solid-phase extraction (d-SPE), and magnetic solid-phase extraction (MSPE) for the extraction and preconcentration of metal ions from complex matrices. The low concentration levels of metal ions in real samples including food samples, environmental samples, and biological samples, as well as the increased number of potentially interfering ions, make the determination of trace levels of metal ions still challenging. A wide variety of MOF materials have been employed for the extraction of metals from sample matrices prior to their determination with spectrometric techniques.

Carbon-Based Nanomaterials in Sensors for Food Safety

Food safety is one of the most important and widespread research topics worldwide. The development of relevant analytical methods or devices for detection of unsafe factors in foods is necessary to ensure food safety and an important aspect of the studies of food safety. In recent years, developing high-performance sensors used for food safety analysis has made remarkable progress. The combination of carbon-based nanomaterials with excellent properties is a specific type of sensor for enhancing the signal conversion and thus improving detection accuracy and sensitivity, thus reaching unprecedented levels and having good application potential. This review describes the roles and contributions of typical carbon-based nanomaterials, such as mesoporous carbon, single- or multi-walled carbon nanotubes, graphene and carbon quantum dots, in the construction and performance improvement of various chemo- and biosensors for various signals. Additionally, this review focuses on the progress of applications of this type of sensor in food safety inspection, especially for the analysis and detection of all types of toxic and harmful substances in foods.

Influence of diazonium and surfactant modification of the mesoporous material on its adsorption properties

We describe a new and direct route to obtain Al-SBA-15-modified materials with different groups on their surface using diazonium salts. For comparison, modification using surfactants was also used. In the present study, we decided to examine the applicability of these materials in the adsorption of compounds released from dental fillings. The effectiveness of modification was proved by results of Fourier transform infrared spectroscopy and energy-dispersive spectrometry. The results indicate the formation of characteristic groups on the surface of the materials. The materials after modification are characterized by smaller surface area and pore volume, which is result of covering the surface with an aryl or surfactant layer. The adsorption properties change after modification and depend on the used modifier. Diazonium modification has a positive effect on sorptive properties when hydroxyl and dimethylamine groups are obtained. The methods of material modification presented in this work may in the future lead to the improvement in the properties of sorbents used in solid-phase extraction.

Electrochemical Determination of Rivastigmine Hydrogen Tartrate at β-Cyclodextrin/Multi-Walled Carbon Nanotubes Modified Electrode

Background:

Electrochemical techniques can easily be adopted to solve many problems of pharmaceutical interest. The implementation of electroanalytical methods in the assay of pharmaceutical formulations has increased greatly. Nowadays, owing to the critical importance of electron transfer and surface properties, chemically modified electrodes have been employed in electrochemical sensors. The chemically modified electrode is one of the most popular electroanalytical sensors and used in several applications.

Methods:

In this work, a β-cyclodextrine/multi-walled carbon nanotubes (β-CD/MWCNTs) composite modified glassy carbon electrode (GCE) was produced and applied to the detection of Rivastigmine hydrogen tartrate (RVT) in pharmaceutical formulations. The voltammetric feature of RVT at this β- CD/MWCNTs modified electrode was evaluated using cyclic voltammetry and square wave voltammetry.

Results:

The β-cyclodextrin and multi-walled carbon nanotubes modified glassy carbon electrode displayed good electrocatalytic activity in the oxidation of rivastigmine hydrogen tartrate with relatively high sensitivity, stability and lifetime. The calibration graph of the analyte was linear over the range 10- 1500 µM with two linear segments and the detection limit was obtained as 2.0 µM (S/N=3). The results showed that the electrochemical sensor has good sensitivity and selectivity.

Conclusion:

The β-CD/MWCNTs modified electrode displayed a high electrochemical activity and good sensitivity toward the oxidation of RVT. Compared with the bare MWCNTs coated sensor, the response of analyte increased soundly and the response potential of target analyte shifted negatively. The results indicated that the β-CD/MWCNTs film coated electrode had good catalysis to the voltammetric oxidation of RVT. The prepared sensor was applied to determine RVT in pharmaceutical samples with satisfactory yields. The outcomes indicate that β-CD/MWCNTs coated electrode is a safe choice for the detection of RVT.

SS, Paggi M, Bordas SP. Advances in Carbon Based Nanomaterials for Bio-Medical Applications

:

The unique mechanical, electrical, thermal, chemical and optical properties of carbon based nanomaterials (CBNs) like: Fullerenes, Graphene, Carbon nanotubes, and their derivatives made them widely used materials for various applications including biomedicine. Few recent applications of the CBNs in biomedicine include: cancer therapy, targeted drug delivery, bio-sensing, cell and tissue imaging and regenerative medicine. However, functionalization renders the toxicity of CBNs and makes them soluble in several solvents including water, which is required for biomedical applications. Hence, this review represents the complete study of development in nanomaterials of carbon for biomedical uses. Especially, CBNs as the vehicles for delivering the drug in carbon nanomaterials is described in particular. The computational modeling approaches of various CBNs are also addressed. Furthermore, prospectus, issues and possible challenges of this rapidly developing field are highlighted.

Effect of the surface curvature on amyloid-β peptide adsorption for graphene

The adsorption of amyloid-β peptide (Aβ) onto graphene nanosheets with curvature at a neutral pH has been studied by using molecular dynamics simulations in combination with umbrella sampling. We found that Aβ adsorbed onto graphene with distinct characteristics, causing the breakage of hydrogen bonds which leads to its conformational change. Interestingly, the adsorption capacity of graphene's surface varies significantly depending on its curvature, namely, the surface with negative curvature has a higher probability to adsorb the Aβ than the one with positive curvature. This phenomenon is further evidenced by the binding energy between the complex of graphene and Aβ derived from the potential of mean force (PMF). The hydrophobic interactions and the direct dispersion interactions between the graphene nanosheet and the Aβ play a dominant role in the adsorption process. These findings indicate that not only is the chemical composition an important factor but also the shape of the nanoparticle is important in determining its interaction with proteins: the contacting surface curvature can lead to different adsorption capability.

The adsorbing capacity of graphene's surface varies significantly depending on its curvature, namely, the surface with negative curvature has a higher probability to adsorb the Aβ than the one with positive curvature.

Carbon nanotube functionalization as a route to enhancing the electrical and mechanical properties of Cu-CNT composites

Copper-CNT (carbon nanotube) composite materials are promising alternatives to conventional conductors in applications ranging from interconnects in microelectronics to electrical cabling in aircraft and vehicles. Unfortunately, exploiting the full potential of these composites is difficult due to the poor Cu-CNT electro-mechanical interface. We demonstrate through large-scale ab initio calculations and sonication experiments that this problem can be addressed by CNT surface modification. Our calculations show that covalent functionalization of CNTs below 6.7 at% significantly improves Cu-CNT wetting and the mechanical properties of the composite. Oxidative pre-treatment of CNTs enhances the Young's modulus of the composite by nearly a factor 3 above that of pure Cu, whereas amination slightly improves the electrical current density with respect to the unmodified Cu-CNT system in the high bias regime. However, only nitrogen doping can effectively improve both the mechanical and electrical properties of the composite. As the experiments show, consistent with the calculations, substitutional doping with nitrogen effectively improves adhesion of the CNT to the Cu matrix. We also predict an improvement in the mechanical properties for the composite containing doped double-wall CNTs. Moreover, the calculations indicate that the presence of nitrogen dopants almost doubles locally the transmission through the nanotube and reduces the back scattering in the Cu matrix around the CNT. The computed electrical conductance of N-doped Cu-CNT "carpets" exceeds that of an undoped system by ∼160%.

Selective adsorption and determination of hexavalent chromium ions using graphene oxide modified with amino silanes

Novel adsorbents are described for the preconcentration of chromium(VI). Graphene oxide (GO) was modified with various amino silanes containing one, two, or three nitrogen atoms in the molecule. These include 3-aminopropyltriethoxysilane (APTES), N-(3-trimethoxysilylpropyl)ethylenediamine (TMSPEDA), and N1-(3-trimethoxysilylpropyl)diethylenetriamine (TMSPDETA). The resulting GO derivatives were characterized by scanning electron microscopy, X-ray photoelectron spectroscopy, and energy-dispersive X-ray fluorescence spectrometry (EDXRF). Adsorption studies show that these GO based sorbents are highly selective for Cr(VI) in the presence of Cr(III) at pH 3.5. Although the amino silanes applied in modification of GO contain different numbers of nitrogen atoms, the maximum adsorption capacities of GO derivatives are very similar (13.3-15.1 mg·g-1). Such results are in accordance with spectroscopy studies which show that the amount of amino silanes attached to GO decreases in the order of APTES > TMSPEDA > TMSPDETA. The APTES-modified GO was applied to selective and sensitive extraction of Cr(VI) ions prior to quantitation by low-power EDXRF using the Cr Kα line. The Cr(VI) ions need not be eluted from the solid adsorbent. The method has a 0.17 ng·mL-1 detection limit, and the recovery is 99.7 ± 2.2% at a spiking level of 10 ng·mL-1. The method was successfully applied to the determination of Cr(VI) in water samples. Graphical abstractGraphene oxide adsorbents modified with various amino silanes are described for the preconcentration and speciation of trace and ultratrace levels of chromium ions.

Online extraction of antihypertensive drugs and their metabolites from untreated human serum samples using restricted access carbon nanotubes in a column switching liquid chromatography system

A novel analytical method was developed to determine 5 antihypertensive drugs of different pharmacological classes (angiotensin-converting enzyme inhibitors, calcium channel blockers, α-2 adrenergic receptor agonists, angiotensin II receptor blockers, and aldosterone receptor antagonists) and some of their metabolites in human serum. The untreated samples were directly analyzed in a column switching system using an extraction column packed with restricted access carbon nanotubes (RACNTs) in an ultra-high performance liquid chromatography coupled to a mass spectrometer (UHPLC-MS/MS). The RACNTs column was able to exclude approximately 100% of proteins from the samples in 2.0min, maintaining the same performance for about 300 analytical cycles. The method was validated in accordance with Food and Drug Administration (FDA) guidelines, being linear for all the determined analytes in their respective analytical ranges (coefficients of determination higher than 0.99) with limits of detection (LODs) and quantification (LOQs) ranging from 0.09 to 10.85μgL^-1 and from 0.30 to 36.17μgL^-1, respectively. High recovery values (88-112%) were obtained as well as suitable results for inter and intra-assay accuracy and precision. The method provided an analytical frequency of 5 samples per hour, including the sample preparation and separation/detection steps. The validated method was successfully used to analyze human serum samples of patients undergoing treatment with antihypertensive drugs, being useful for pharmacometabolomic, pharmacogenomic, and pharmacokinetic studies.

Super high removal capacities of heavy metals (Pb2+ and Cu2+) using CNT dendrimer

This research demonstrates the capability of carbon nanotubes (CNT) modified with four generations of poly-amidoamine dendrimer (PAMAM, G4) to remove Cu²⁺ and Pb²⁺ heavy metals from aqueous solution in single and binary component systems. Uniquely high adsorption capacities for copper and lead, which are 3333 and 4870mg/g respectively, were achieved. FTIR, H¹ NMR, Zeta potential, SEM and TEM techniques were employed for characterizing the synthetic nanocomposite and indicated that the dendrimer functionalized CNTs have been synthesized. The effects of several parameters including initial metal ion concentration, solution pH and the nanocomposite dosage were studied. The experimental data were analyzed by the Langmuir and Freundlich isotherms and the pseudo-first order and pseudo-second order kinetics models. The maximum adsorption occurred at pH=7. The adsorption process for Cu²⁺ and Pb²⁺ in single and binary component systems fit the Langmuir and extended Langmuir models respectively. This study also tested the kinetic sorption of the metals on PAMAM/CNT in single and binary component metal systems at various metal ions concentrations. The results showed that PAMAM/CNT nanocomposite was a super-adsorbent, able to uptake uniquely large quantities of heavy metal from single and binary component liquid phase.

Understanding the sorption behavior of Pu4+ on poly(amidoamine) dendrimer functionalized carbon nanotube: sorption equilibrium, mechanism, kinetics, radiolytic stability, and back-extraction studies

Poly(amidoamine) dendrimer functionalized carbon nanotube was demonstrated as highly efficient sorbent of the Pu4+ from radioactive waste solution. The second generation dendrimer was found to have more efficiency as compared to the 1st generation might be due to the availability of more functionality for coordinating to the Pu4+ ion. Analysis of different isotherm models revealed that, Langmuir isotherm was predominantly operating through chemi-sorption (with the sorption energy 10.07 and 16.95 kJ mol−1 for 1st and 2nd generation dendrimer) with the sorption capacity 89.22 mg g−1 and 92.48 mg g−1 for 1st and 2nd generation dendrimer, respectively. Analysis of different sorption kinetics model revealed that the sorption proceeded via pseudo 2nd order reaction. The 2nd generation dendrimer was found to be radiolytically more stable while oxalic acid was found to be suitable for quantitative back extraction of Pu4+.

Simultaneous monitoring of the drug release and antitumor effect of a novel drug delivery system-MWCNTs/DOX/TC

Monitoring drug release and therapeutic efficacy is crucial for developing drug delivery systems. Our preliminary study demonstrated that, as compared with pristine multiwalled carbon nanotubes (MWCNTs), transactivator of transcription (TAT)-chitosan functionalized MWCNTs (MWCNTs-TC) were a more promising candidate for drug delivery in cancer therapy. In the present study, a MWCNTs/TC-based drug delivery system was developed for an anticancer drug, doxorubicin (DOX). The drug loading and in vitro release profiles, cellular uptake and cytotoxicity were assessed. More importantly, the in vivo drug release and antitumor effect of MWCNTs/DOX/TC were evaluated by noninvasive fluorescence and bioluminescence imaging. It was demonstrated that MWCNTs/DOX/TC can be efficiently taken up by BEL-7402 hepatoma cells. The release of DOX from MWCNTs/DOX/TC was faster under lower pH condition, which was beneficial for intrcellular drug release. The in vivo release process of DOX and antitumor effect in animal model were monitored simultaneously by noninvasive fluorescence and luminescence imaging, which demonstrated the application potential of MWCNTs/DOX/TC for cancer therapy.

Recent advances in nanomaterials for water protection and monitoring

Nanomaterials (NMs) for adsorption, catalysis, separation, and disinfection are scrutinized. NMs-based sensor technologies and environmental transformations of NMs are highlighted.

Diels-Alder versus 1,3-dipolar cycloaddition pathways in the reaction of C20 fullerene and 2-furan nitrile oxide

As one of the smallest carbon cages, C20 and its properties are very important. The nature of these compounds, and the development of procedures for their functionalisation for end-use in nano sized devices, have become important fields. Both Diels–Alder and 1,3-dipolar cycloaddition reactions are appropriate strategies to functionalise carbon nano tubes and C60 fullerenes. In this regard a comparison between two pathways of interaction between C20 and 2-furan nitrile oxide has been performed here to determine which reaction, Diels–Alder or 1,3-dipolar addition, is more suitable for functionalisation of C20. The results showed that 1,3-dipolar cycloaddition is faster than the Diels–Alder reaction for the functionalisation of C20 fullerene by 2-furan nitrile oxide.

Preconcentration of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II) with ethylenediamine-modified graphene oxide

We describe a novel solid phase sorbent that was synthesized by coupling graphene oxide (GO) to ethylenediamine (EDA). This nanomaterial (referred to as GO-EDA) is capable of adsorbing the ions of iron, cobalt, nickel, copper, zinc and lead. The ethylenediamine-modified graphene oxide was characterized by X-ray photoelectron spectroscopy, scanning electron microscopy and Fourier transform infrared spectroscopy. The analytical procedure relies on (a) sorption of metal ions on GO-EDA dispersed in aqueous samples; (b) filtering, and (c) direct submission of the filter paper to energy-dispersive X-ray fluorescence spectrometry. This kind of dispersive micro-solid phase extraction was optimized with respect to pH values, concentration of GO-EDA, contact time, and the effects of interfering ions and humic acid on recovery of determined elements. Under optimized conditions, the recoveries of spiked samples range from 90 to 98 %. The detection limits are 0.07, 0.10, 0.07, 0.08, 0.06 and 0.10 ng mL-1 for Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II), respectively. The method has a relative standard deviation of <6 %, and its accuracy was verified by analysis of two standard reference materials [LGC6016 (estuarine water) and BCR-610 (groundwater)]. It was successfully applied to the determination of trace amounts of these metal ions in water samples. Graphical AbstractGraphene oxide was coupled to ethylenediamine in order to obtain an effective sorbent (GO-EDA) for preconcentration of Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Pb(II) from environmental water samples.

Carbon nanotubes part I: preparation of a novel and versatile drug-delivery vehicle

INTRODUCTION

It is 23 years since carbon allotrope known as carbon nanotubes (CNT) was discovered by Iijima, who described them as "rolled graphite sheets inserted into each other". Since then, CNTs have been studied in nanoelectronic devices. However, CNTs also possess the versatility to act as drug- and gene-delivery vehicles.

AREAS COVERED

This review covers the synthesis, purification and functionalization of CNTs. Arc discharge, laser ablation and chemical vapor deposition are the principle synthesis methods. Non-covalent functionalization relies on attachment of biomolecules by coating the CNT with surfactants, synthetic polymers and biopolymers. Covalent functionalization often involves the initial introduction of carboxylic acids or amine groups, diazonium addition, 1,3-dipolar cycloaddition or reductive alkylation. The aim is to produce functional groups to attach the active cargo.

EXPERT OPINION

In this review, the feasibility of CNT being used as a drug-delivery vehicle is explored. The molecular composition of CNT is extremely hydrophobic and highly aggregation-prone. Therefore, most of the efforts towards drug delivery has centered on chemical functionalization, which is usually divided in two categories; non-covalent and covalent. The biomedical applications of CNT are growing apace, and new drug-delivery technologies play a major role in these efforts.

Surface Curvature Relation to Protein Adsorption for Carbon-based Nanomaterials

The adsorption of proteins onto carbon-based nanomaterials (CBNs) is dictated by hydrophobic and π-π interactions between aliphatic and aromatic residues and the conjugated CBN surface. Accordingly, protein adsorption is highly sensitive to topological constraints imposed by CBN surface structure; in particular, adsorption capacity is thought to increase as the incident surface curvature decreases. In this work, we couple Molecular Dynamics (MD) simulations with fluorescence spectroscopy experiments to characterize this curvature dependence in detail for the model protein bovine serum albumin (BSA). By studying BSA adsorption onto carbon nanotubes of increasing radius (featuring descending local curvatures) and a flat graphene sheet, we confirm that adsorption capacity is indeed enhanced on flatter surfaces. Naïve fluorescence experiments featuring multi-walled carbon nanotubes (MWCNTs), however, conform to an opposing trend. To reconcile these observations, we conduct additional MD simulations with MWCNTs that match those prepared in experiments; such simulations indicate that increased mass to surface area ratios in multi-walled systems explain the observed discrepancies. In reduction, our work substantiates the inverse relationship between protein adsorption capacity and surface curvature and further demonstrates the need for subtle consideration in experimental and simulation design.