Recent advances in preparation and applications of monolithic chiral stationary phases

Fabrication and evaluation of a dual-zwitterionic functionalized hydrophilic monolith for chromatographic separation

In this study, the chromatographic performance of a novel dual-zwitterionic hydrophilic stationary phase were investigated. Three zwitterionic HILIC monoliths were prepared using 3-(4-((methacryloyloxy)methyl)-1-methylpiperidin-1-ium-1-yl)propane-1-sulfonate (MAMMPS), 2-methacryloyloxyethyl phosphorylcholine (MPC), and a combination of MAMMPS and MPC (1:1, molar ratio) with N,N'-methylenebisacrylamide (MBA), separately. The monoliths exhibited good repeatability and stability. A high column efficiency of 120,000 plates/m was reached on the novel dual-zwitterionic functionalized poly(MAMMPS@MPC-co-MBA) monolith. Through the analysis and testing with different standards, the poly(MAMMPS@MPC-co-MBA) monolith exhibited the strongest retention capacity for negatively charged benzoic acid derivatives due to its high hydrophilicity and weak electronegativity. In contrast, the poly(MPC-co-MBA) monolith, functionalized with a single zwitterion, facilitated electrostatic interactions with negatively charged analytes. Baseline separation was achieved on all three monoliths for selected nucleobases, nucleosides, phenol derivatives, and amine compounds. However, their retention strength was mainly related to the hydrophilicity of the stationary phases, while hydrogen bonding and electrostatic interactions played secondary roles. Among the monoliths, the poly(MAMMPS-co-MBA) monolith demonstrated the best separation for neutral, acidic, and alkaline compounds. These findings offer valuable insights for the future selection and application of dual-zwitterionic HILIC monoliths for chromatographic separations.

A teicoplanin-cyclodextrin bilayer chiral stationary phase boosts chiral separation of native amino acids

Separating enantiomers is crucial for advancing scientific research. Teicoplanin-based columns exhibit unique advantages in the chiral separation of native amino acids, and its further improvement for better separation performance is valuable. This work reports double-layer bridged columns, in which different amounts of cyclodextrin (CD) were directly bridged onto teicoplanin (TK) molecules on the chiral stationary phase (TK CSP) to prepare TK-CD-2 CSP and TK-CD-6 CSP. Additionally, a column with the two chiral selectors (TK and CD) arranged in a single layer on the silica gel surface (TK + CD CSP) was prepared, which served as a control group. The results revealed that TK-CD-6 CSP exhibited better chiral separation ability for native amino acids and a wider range of separable chiral molecules than TK, TK + CD, and TK-CD-2 CSPs. The possible mechanism is that the dual-layer structure of the TK-CD-6 CSP effectively reduces the competition between the different chiral selectors and provides more chiral recognition sites, which enhances the separation ability and achieves broad-spectrum chiral separation. This work offers valuable insights for enhancing the chiral separation ability of teicoplanin-based columns and developing liquid chromatographic strategies with separation diversity.

Preparation of Chiral Stationary Phase Based on 1,1'-bi-2-Naphthol for Chiral Enantiomer Separation

Two enantiomeric novel chiral stationary phases (CSPs) R-3-Amide-BINOL CSP (CSP-1) and S-3-Amide-BINOL CSP (CSP-2) were prepared using (R/S)-1,1'-bi-2-naphthol (BINOL) derivatives as chiral selectors. The structure of CSPs was characterized by nuclear magnetic resonance, scanning electron microscope and elemental analysis. Four chiral solutes were selected under normal phase HPLC conditions to evaluate the chiral separation ability of the two novel CSPs. The effects of mobile phase and acidic additives on enantiomeric separation were investigated. The combination of molecular docking simulation and experimental data has elucidated the crucial role of hydrogen bonds and π-π interactions formed between the analyte and CSP in chiral recognition, and different configurations of CSP can cause enantiomeric elution sequence reversal, indicating that the configuration of chiral selectors in CSP has a significant impact on chiral recognition ability.

L-Cysteine-Bonded Polymeric Monolithic Stationary Phase for Enantioseparation of Dansyl Amino Acids in Capillary Liquid Chromatography

A chiral monolith stationary phase was fabricated by modifying the monolith surface using L-cysteine through a thiol-epoxy click reaction. L-cysteine-bonded polymer monolith was characterized by scanning electron microscopy/energy-dispersive X-ray and attenuated total reflectance Fourier-transformed infrared. The monomer content and modification temperature were carefully optimized to create a polymer monolith with excellent mechanical stability and permeability. Our findings revealed that the column morphology depended significantly on the porogen concentration and modification temperature for its morphology and efficiency. Adequate pores and binding sites were formed with the optimal porogen content, while a higher modification temperature improved the modification yield, enhancing peak shapes and increasing separation efficiency. The column demonstrated its capability for enantioseparation of dansyl glutamic acid, dansyl aspartic acid, dansyl methionine, and dansyl phenylalanine using a 60 mM ammonium acetate buffer solution and acetonitrile in a 20:80 v/v ratio. It maintained good mechanical stability and repeatability with no relative standard deviation exceeding 7%. These results indicated that the L-cysteine-bonded polymer monolith has excellent potential as a chiral stationary phase.

One-Step Synthesis and Oriented Immobilization of Strep-Tag II Fused PDGFRβ for Screening Intracellular Domain-Targeted Ligands

Accurate orientations and stable conformations of membrane receptor immobilization are particularly imperative for accurate drug screening and ligand-protein affinity analysis. However, there remain challenges associated with (1) traditional recombination, purification, and immobilization of membrane receptors, which are time-consuming and labor-intensive; (2) the orientations on the stationary phase are not easily controlled. Herein, a novel one-step synthesis and oriented-immobilization membrane-receptor affinity chromatography (oSOMAC) method was developed to realize high-throughput and accurate drug screening targeting specific domains of membrane receptors. We employed Strep-tag II as a noncovalent immobilization tag fused into platelet-derived growth factor receptor β (PDGFRβ) through CFPS, and meanwhile, the Strep-Tactin-modified monolithic columns are prepared in batches. The advantages of oSOMAC are as follows: (1) targeted membrane receptors can be expressed independent of living cell within 1-2 h; (2) orientation of membrane receptors can be flexibly controlled and active sites can expose accurately; and (3) targeted membrane receptors can be synthesized, purified, and orientation-immobilized on monolithic columns in one step. Accordingly, three potential PDGFRβ intracellular domain targeted ligands: tanshinone IIA (Tan IIA), hydroxytanshinone IIA, and dehydrotanshinone IIA were successfully screened out from Salvia miltiorrhiza extract through oSOMAC. Pharmacological experiments and molecular docking further demonstrated that Tan IIA could attenuate hepatic stellate cells activation by targeting the protein kinase domain of PDGFRβ with a KD value of 9.7 μM. Ultimately, the novel oSOMAC method provides an original insight for accurate drug screening and interaction analysis which can be applied in other membrane receptors.

Preparation and evaluation of a piperidinium-sulfonate based zwitterionic monolith for HILIC separation

In this study, a novel piperidinium-sulfonate based zwitterionic hydrophilic monolith was prepared through thermally initiated co-polymerization of a piperidinium-sulfonate monomer 3-(4-((methacryloyloxy)methyl)-1-methylpiperidin-1-ium-1-yl)propane-1-sulfonate (MAMMPS), and a hydrophilic crosslinker N,N'-methylenebisacrylamide (MBA) using n-propanol and H2O as porogenic system. Satisfactory mechanical and chemical stabilities, good repeatability and high column efficiency (120,000 N/m) were obtained on the optimal monolith. The resulting poly(MAMMPS-co-MBA) monolith showed a typical HILIC retention behavior over an ACN content range between 5 and 95 %. Furthermore, this column exhibited good separation performance for various polar compounds. Compared to quaternary ammonium-sulfonate based zwitterionic hydrophilic monolith, i.e. poly(N,N-dimethyl-N-methacryloxyethyl-N-(3-sulfopropyl)ammonium betaine-co-MBA), the poly(MAMMPS-co-MBA) monolith displayed stronger retention and better selectivity for the tested phenolic and amine compounds at different pH conditions. Finally, this column was applied for the separation of six sulfonamide antibiotics, and the analytical characteristics of the method were evaluated in terms of precision, repeatability, limits of detection (LOD) and quantitation (LOQ). Overall, this study not only developed a novel HILIC monolithic column, but also proved the potential of piperidinium-sulfonate based zwitterionic chemistry as stationary phase, which further increased the structure diversity of zwitterionic HILIC stationary phases.

Chiral zeolite beta used as stationary phase for enantioseparation in miniaturized open tubular capillary electrochromatography with amperometric detection

BACKGROUND

With the rapid growth of the demand for optically pure compounds in the fields of biology, medicine and stereospecific synthesis, it is of great importance to develop efficient, economical, simple enantioseparation and analysis methods. Open tubular capillary electrochromatography (OT-CEC) has attracted much attention in the field of chiral separation, but its column capacity and the sensitivity of common-used optical detection are relatively low. Zeolite beta nanomaterial is both enantioselective and size-selective, providing suitable chiral microenvironment for chiral recognition, and amperometric detection (AD) avoids the low sensitivity caused by the short optical path in optical detection to some extent.

RESULTS

Zeolite beta nanomaterials with different particle sizes (25, 50 and 200 nm) were synthesized, and the morphology and structure were characterized by scanning electron microscopy and X-ray diffraction. Then, a novel chiral OT column was prepared by one-step method using zeolite beta nanomaterial as chiral stationary phase, and its separation performance was characterized by miniaturized CEC with AD (mini-CEC-AD) device. Under the optimum conditions, six groups of chiral drugs achieved baseline separation. Norepinephrine enantiomers were used for evaluating the inter-day, intra-day and inter-column reproducibility of the prepared open-tubular column. The relative standard deviations of migration time, peak area, resolution and selectivity factor were within 8.7 %. The limits of detection for norepinephrine enantiomers were 0.18 μg mL-1 (S/N = 3), and the average recoveries were in range of 96.7-105.0 %. This developed method has been successfully applied to the analysis of impurity enantiomer in potassium dichromate (+)-norepinephrine injection sample.

SIGNIFICANCE

Zeolite beta nanomaterial was used as the stationary phase to prepare chiral OT columns for the first time, and this one-step preparation method is simple and easy. The introduction of zeolite beta enriches the types of chiral stationary phase materials in electrochromatographic columns, and mini-OT-CEC-AD system provides an alternative for fast enantioseparation of chiral compounds.

Preparation of chiral monoliths with new modulation of the monolith surface chemistry for the enantioseparation of chiral drugs by nano-liquid chromatography

Here, we report the preparation and application of two new chiral monoliths for the enantioseparation of chiral drugs in nano-LC. Using 3‑chloro-2-hydroxypropylmethacrylate (HPMA-Cl, 2) as a precursor monomer, two different chiral monomers namely, Nα-Boc-Lys-HPMA (3A) and Nα-Fmoc-Lys-HPMA (3B) were synthesized and used for the preparation of chiral polymer monoliths. The first monolithic column (referred to as monolith I) was prepared by an in-situ polymerization of Nα-Boc-Lys-HPMA as the chiral monomer and ethylene dimethacrylate while the second monolithic column (referred to as monolith II) was prepared by an in-situ polymerization of Nα-Fmoc-Lys-HPMA as the chiral monomer and ethylene dimethacrylate as the crosslinker. Methanol and 1-propanol were used as the porogenic solvents. The prepared chiral monoliths were investigated for the enantioseparation of chiral drugs, including β-blockers (e.g., atenolol, propranolol, metoprolol) and anti-inflammatory drugs (e.g., ketoprofen, ibuprofen, flurbiprofen, naproxen, etodolac). The enantioseparation could be achieved via the formation of π-π interactions on the aromate-rich and aromate-poor chiral molecules while enantioseparation mechanism of chiral drugs included mostly π-π interactions and hydrogen bonding. Monolith II showed better enantioselectivity than Monolith I and the resolution values up to 2.12 were successfully achieved.

Investigation of the chiral recognition role of cyclodextrin hydroxyl moieties via high performance liquid chromatography

Cyclodextrin (CD) is known to afford excellent enantioselectivities due to its hydrophobic cavity and external H-bonding sites from hydroxyl moieties. However, there is still a lack of direct and comprehensive evidence clearly illustrating the origin of the important H-bonding effect. Regarding this issue, herein, four allylimidazole CD derivatives by selective substitution of the primary (6-position) and/or secondary (2,3-position) CD were synthesized and clicked onto silica surfaces to afford the corresponding chiral stationary phases (CSPs). The chiral chromatographic performances were systematically evaluated by separating 35 racemic analytes including isoxazolines, dansyl-amino acids, flavonoids and other racemates under reversed-phase HPLC. The chiral selection factors (α) and retention times (k) of the analytes on the as-prepared CSPs were comprehensively compared and it reveals that the enantioseparation ability was significantly altered due to the selective substituents of CD hydroxyl groups. The natural allylimidazole CD CSP (AICDCSP) was superior to the 6-O-tert-butyldimethylsilyl AICDCSP (6-TBDMAICDCSP) for most analytes. Dansyl amino acids and Ar-Pys were well separated on AICDCSP and 6-TBDMAICDCSP, where dansyl amino leucine gained the highest resolution up to 4.72 on AICDCSP, and flavonoids and Ar-Oprs were only separated on AICDCSP. These interesting separation results demonstrate that the secondary hydroxyl groups play a pivotal role in the separation of chiral compounds. In addition, the size of the CD cavity and the choice of solute also have an effect on the separation of substances. The mechanism involved in enantioselective discrimination of the selectively substituted CDs was further investigated by the molecular docking simulation.

Design of molecularly imprinted resin material with sulfonic acid functionalization for enantioseparation of (±)-cathine

In the current work, an enantioselective imprinting technique was used to develop a very selective adsorbent for the (+)-cathine ((+)-Cat) enantiomer. The phenolic sulfonamide produced from 2,4-dihydroxybenzenesulfonic acid (HBS) and (+)-Cat ((+)-Cat-HBS) was initially synthesized by triphenylphosphene activation and subsequently involved in condensation polymerization with resorcinol in the presence of formaldehyde under acidic conditions. Alkaline sulfonamide bond-breaking was subsequently employed to separate the (+)-Cat template from the polymer, and the resulting imprinted resin ((+)-CIP) displayed high selectivity for the (+)-Cat, with a capacity of 225 ± 2 mg/g. Studies of selectivity also showed that the (+)-Cat enantiomer was preferred over its counterpart because of the development of configurationally matching receptors. In addition, the produced resin was used for the enantioresolution of (±)-Cat racemate by column method, yielding a loading supernatant solution with an enantiomeric excess of (+)-Cat 50% and a recovery eluant solution with an excess of (-)-Cat 85%.

Recent advances in chiral selectors immobilization and chiral mobile phase additives in liquid chromatographic enantio-separations: A review

For decades now, the separation of chiral enantiomers of drugs has been gaining the interest and attention of researchers. In 1991, the first guidelines for development of chiral drugs were firstly released by the US-FDA. Since then, the development in chromatographic enantioseparation tools has been fast and variable, aiming at creating a suitable environment where the physically and chemically identical enantiomers can be separated. Among those tools, the immobilization of chiral selectors (CS) on different stationary phases and the chiral mobile phase additives (CMPA) which have been progressed and studied extensively. This review article highlights the major advances in immobilization of CS together with their different recognition mechanisms as well as CMPA as a cheaper and successful alternative for chiral stationary phases. Moreover, the role of molecular modeling tool as a pre-step in the choice of CS for evaluating possible interactions with different ligands has been pointed up. Illustrations of reported methods and updates for immobilized CS and CMPA have been included.

Tetrapeptide-based mimotope affinity monolith for the enrichment and analysis of anti-HER2 antibody and antibody-drug conjugate

Selective enrichment and analysis of therapeutic antibodies in biological fluids are crucial for the development of biopharmaceuticals. Recently, peptide-based affinity chromatography has exhibited fascinating prospects for antibody enrichment due to the high affinity and specificity of small peptides. However, the post-modification approach of peptide ligands on the material surface is complicated and time-consuming. In this study, a methacrylate modified tetrapeptide (m-EDPW) was firstly demonstrated as the affinity ligand of trastuzumab (K_d = 1.91 ± 1.81 μM). Next, the m-EDPW based affinity monolith was prepared using a facile one-step polymerization method, which could overcome the drawbacks of traditional post-modification preparation strategies. Based on the monolith as described above, a simple enrichment approach was developed under the optimal washing and elution conditions. Based on the excellent properties, such as high porosity (53.09%), weak electrostatic interaction and suitable affinity (1.00 ± 2.14 μM for anti-HER2 ADC), this novel monolith exhibited good specificity and recovery for antibodies (91.6% for trastuzumab, 98.37% for anti-HER2 ADC), and low nonspecific adsorption for human serum albumin (DBC_10% = 0.5 mg/g polymer). Particularly, this material was successfully applied to enrich trastuzumab and its related antibody-drug conjugate (ADC) from different cell culture medias. The dynamic tracking analysis of ADC in the critical quality attributes (e.g., charge variants, drug to antibody ratio and subunit conjugation ratio) was also achieved by combining the enrichment approach, capillary electrophoresis or reversed phase liquid chromatography. In summary, the exploited peptide-based mimotope affinity materials showed a great potential for the application in biopharmaceutical analysis.

Preparation of miniaturized hydrophilic affinity monoliths: Towards a reduction of non-specific interactions and an increased target protein density

In affinity chromatography, non-specific interactions between the ligands and the affinity column may affect the results, leading to misinterpretations during the investigation of protein-ligand interactions (detection of false positives in ligand screening, lack of specificity in purification). Such non-specific interactions may arise both from the underlying support or from the target protein itself. If the second ones are protein-dependent (and cannot be studied in a general framework), the first ones occur in the same way regardless of the immobilized target. We propose a methodology to identify the origin of such non-specific interactions with the underlying material of the affinity column. This methodology relies on the systematic investigation of the retention behavior of a set of 41 low-molecular weight compounds covering a wide chemical space (net charge, log D, functionality). We first demonstrate that the main source of non-specific interactions on the most commonly used GMA-co-EDMA monolith comes from hydrophobic effects. To reduce such non-specific interactions, we developed a new hydrophilic glycidyl methacrylate-based monolith by replacing the EDMA crosslinker by the more hydrophilic NN' Methylenebisacrylamide (MBA). Optimization of the synthesis parameters (monomer content, initiation type, temperature) has focused on the reduction of non-specific interaction with the monolithic support while maximizing the amount of protein that can be grafted onto the monolith at the issue of its synthesis. The retention data of the 41 test solutes on the new poly(GMA-co-MBA) monolith shows a drastic reduction of non-specific interactions except for cationic compounds. The particular behavior of cationic compounds is due to their electrostatic interactions with carboxylic groups resulting from the partial acidic hydrolysis of amide groups of MBA during the epoxide ring opening step. So, the ring opening step in acidic media was replaced by a hot water treatment to avoid side reaction on MBA. The new monolith poly(GMA-co-MBA) not only has improved hydrophilic surface properties but also a higher protein density (16 ± 0.8 pmol cm^-1 instead of 8 ± 0.3 pmol cm^-1). To highlight the benefits of this new hydrophilic monolith for affinity chromatographic studies, frontal affinity chromatography experiments were conducted on these monoliths grafted with con A.

Fundamentals of chirality, resolution, and enantiopure molecule synthesis methods

The chirality of molecules is a concept that explains the interactions in nature. We may observe the same formula but different organizations revolving around the chiral center. Since Pasteur's meticulous observation of sodium ammonium tartrate crystals' structure, scientists have discovered many features of chiral molecules. The number of newly approved single enantiomeric drugs increases every year and takes place in the market. Thus, separation or resolution methods of racemic mixtures are of continued importance in the efficacy of drugs, installation of affordable production processes, and convenient synthetic chemistry practice. This article presents the asymmetric synthesis approaches and the classification of direct resolution methods of chiral molecules.

Carboxymethyl-β-cyclodextrin and histidine-zeolitic imidazolate framework-8 used for enantioseparation of three basic drugs in open-tubular capillary electrochromatography

Metal organic frameworks (MOFs) have drawn broad attention as a novel stationary phase due to their highly porous structure, modifiable pores, large specific surface areas, and satisfactory stability. In this paper, histidine-zeolitic imidazolate framework-8 (His-ZIF-8) synthesized at room temperature was physically coated to the internal surface of the capillary column and the carboxymethyl-β-cyclodextrin (CM-β-CD) as the chiral selector was chemically bonded to the His-ZIF-8@capillary column. The prepared CM-β-CD@His-ZIF-8@capillary column was used for the enantioseparation of amlodipine, propranolol, and atenolol in capillary electrochromatography. In contrast to the CM-β-CD@capillary column without His-ZIF-8, the CM-β-CD@His-ZIF-8@capillary column reveals significantly improved enantiodiscrimination performance for amlodipine (R_s : 0 → 2.29), propranolol (R_s : 0 → 1.69), and atenolol (R_s : 0 → 0.79). His-ZIF-8 concentration, buffer pH, buffer concentration, and the proportion of organic modifier were evaluated in detail with enantiomerically separating chiral molecules. The repeatability of intraday, day-to-day, and column-to-column have been discussed; the result was preferable, and the relative standard deviation (RSD) of separation parameters was <6.7%.

Current trends in the development of polymer-based monolithic stationary phases

This review focuses on the development and applications of organic polymer monoliths, with special attention to the literature published in 2021. The latest protocols in the preparation of polymer monoliths are discussed. In particular, tailored surface modification using nanomaterials, the development of chiral stationary phases and development of stationary phases for capillary electrochromatography are reviewed. Furthermore, the optimization of pore forming solvents composition is also discussed. Finally, the use of monolithic stationary phases in sample treatment using solid-phase extraction and enrichment methods, molecularly imprinted polymers and enzymatic reactors is mentioned.

Chromatographic performance of zidovudine imprinted polymers coated silica stationary phases

Nowadays, molecularly imprinted polymers (MIPs) coated silica stationary phases (SPs) have aroused great attention, owing to their good properties of high selectivity, good stability, facile synthesis procedure and low cost. In this study, zidovudine imprinted polymers coated silica stationary phases (MIPs/SiO₂ SPs) were synthesized by surface imprinting technique using zidovudine as the template molecule, methacrylic acid as the functional monomer, ethylene glycol dimethacrylate as the cross-linking agent, azobisisobutyronitrile as the initiator, and bare silica spheres (particle size, 5 μm; pore size, 20 nm) as substrates. In the process, reagents with low concentration were used to prepare thin layer of MIPs coating on the surface of silica microbeads. The properties of the materials were characterized by scanning electron microscope (SEM), fourier transform infrared spectrometer (FT-IR), carbon elemental analysis and N₂ adsorption-desorption experiment. The obtained SPs were packed into stainless steel columns (2.1 mm × 150 mm) via a slurry method. The prepared columns were applied for separation of nucleoside analogues with similar chemical structures and strong polarity. The retention mechanism of MIPs/SiO₂ SPs for nucleoside analogues was investigated carefully. And the chromatographic performances of the resulting MIPs based SPs were superior to those of the commercial SPs. Furthermore, the synthesized MIPs/SiO₂ SPs possessed great potentials in separation of ginsenosides. This investigation demonstrated that MIPs based SPs were successfully synthesized and provided a new approach to polar compounds separation and analysis.

[Preparation of liquid crystal-based molecularly imprinted monolith and its molecular recognition thermodynamics]

Molecularly imprinted polymers (MIPs) incorporated with liquid crystalline monomers can imprint and recognize templates at a very low level of crosslinking, thus addressing challenges associated with conventional MIPs, such as the embedding of the imprinted sites, low binding capacity, and slow mass transfer due to the high degree of crosslinking. Compared with traditional MIPs, the prepared MIPs have a greater number of easily binding sites, which can effectively overcome the embedding and low utilization of imprinting sites. Simultaneously, with a decrease in the level of chemical crosslinking, the mass transfer of template molecules can be significantly improved. However, the imprinting effect of liquid crystalline MIPs is generally weaker than that of traditional MIPs due to the low degree of crosslinking. Therefore, to obtain liquid crystalline MIPs with a good imprinting effect, a series of low-crosslinked liquid crystalline molecularly imprinted monoliths were prepared by graft polymerization and evaluated by high performance liquid chromatography (HPLC) to systematically determine the relation between the polymerization parameters and the affinity of the resulting liquid crystalline MIPs. In this experiment, trimethylolpropane trimethacrylate (TRIM) was used to synthesize a monolithic column skeleton with toluene and dodecyl alcohol as porogens. (S)-Naproxen was used as a template and liquid crystalline monomer 4-(4-cyanophenyl)-cyclohexyl ethylene (CPCE) was added for grafting to synthesize the liquid crystalline MIP monolith. The influence of the acetonitrile content and pH in the mobile phase on the chromatographic retention of the template molecule was investigated. The results showed that the main force of MIP recognizing naproxen changed from hydrogen bonding to hydrophobic interaction by the addition of the liquid crystalline monomer. Frontal analysis and adsorption isotherm fitting, including Langmuir, Freundlich, and Scatchard fitting, showed that when the crosslinking degree was 15%, the liquid crystalline MIPs exhibited the highest imprinting factor and heterogeneity, and the specific adsorption was stronger than non-specific adsorption. By analyzing the stoichiometric displacement model, the total affinity of the MIP monoliths for the template molecules (ln A) was determined to be 0.645, significantly higher than that of its analogues, indicating that the liquid crystalline imprinted monolith had a higher total affinity for the template molecule. The spatial matching degree (nβ) of the template molecule to the cavity structures of MIPs was also very high, and only inferior to that of ketoprofen. Nevertheless, the ln A value of ketoprofen was only 0.242, which indicated that the spatial effect was not the key factor in determining the recognition ability of liquid crystalline imprinting systems. An analysis of the separation thermodynamics revealed that the separation of the liquid crystalline MIPs was an entropy-controlled process, while that of conventional liquid crystalline-free MIPs was an enthalpy-controlled process. Based on the above results, the addition of a liquid crystalline monomer may alter the recognition mechanism of MIPs, and an appropriately low crosslinking degree can significantly improve the recognition performance of liquid crystalline MIPs, paving the way for a new generation of MIPs.

Facile separation of enantiomers via covalent organic framework bonded stationary phase

Covalent organic frameworks (COFs), a type of crystalline polymers, have attracted increasing interest because of their controllability of geometry and functionality. Featuring infinitely extended networks and tremendous interaction sites, COFs emerge as a potential platform for separation science. Here, a novel chiral COF (β-CD COF_BPDA) constructed by the imine condensation of 4,4'-biphenyldicarboxaldehyde and heptakis(6-amino-6-deoxy)-β-cyclodextrin was introduced into an electrochromatographic system via a photopolymerization method and applied to the separation of enantiomers. The structure and properties of as-synthesized β-CD COF_BPDA were investigated by powder X-ray diffraction (PXRD) patterns, Fourier transform infrared (FT-IR) spectroscopy, thermogravimetric analysis (TGA), and N₂adsorption-desorption isotherms. It was proved that β-CD COF_BPDA was provided with larger pore size and BET surface area. The β-CD COF_BPDA coating endowed the chiral stationary phase with superior three-dimensional orientation, and realized satisfactory separation with improved selectivity and column efficiency for a dozen racemic drugs. Under the optimized conditions, homatropine, ondansetron, metoprolol, terbutaline, tulobuterol, and promethazine were all baseline separated with resolution values of 2.24, 2.03, 1.65, 1.62, 1.60, and 1.58, respectively. The results indicate the high perspective of COF modified stationary in enantioseparation.

Chiral Monolithic Silica-Based HPLC Columns for Enantiomeric Separation and Determination: Functionalization of Chiral Selector and Recognition of Selector-Selectand Interaction

This review draws attention to the use of chiral monolithic silica HPLC columns for the enantiomeric separation and determination of chiral compounds. Properties and advantages of monolithic silica HPLC columns are also highlighted in comparison to conventional particle-packed, fused-core, and sub-2-µm HPLC columns. Nano-LC capillary monolithic silica columns as well as polymeric-based and hybrid-based monolithic columns are also demonstrated to show good enantioresolution abilities. Methods for introducing the chiral selector into the monolithic silica column in the form of mobile phase additive, by encapsulation and surface coating, or by covalent functionalization are described. The application of molecular modeling methods to elucidate the selector–selectand interaction is discussed. An application for enantiomeric impurity determination is also considered.

[Preparation and application of chiral silica gel spheres based on L-glutamic]

无机介孔硅球因其具有足够的机械强度、热稳定性,以及适应多种流动相的优点,成为高效液相色谱(HPLC)柱填料中使用最广泛和最重要的材料。但在此研究领域中,并未见球形的全无机手性硅胶用作HPLC手性固定相。该文以无机球形介孔硅胶作为研究对象,通过堆砌硅珠法,以硅溶胶为原料,L-谷氨酸(L-Glu)为手性源,在手性环境中制造出脲醛树脂与胶体二氧化硅混合的小球,在550 ℃高温下煅烧除去树脂部分,制备基于L-Glu的无机介孔硅胶球。通过元素分析、红外光谱、扫描电镜、透射电镜和氮气吸附等表征证明这是一种具有规则球形的手性硅胶球,其手性来源于硅胶球自身的骨架和孔结构。将L-Glu手性硅胶球作为固定相制备了HPLC色谱柱,以正己烷-异丙醇(9∶1, v/v)作为流动相,流速为0.1 mL/min,考察了该手性柱对一系列外消旋化合物的拆分性能。实验表明,该手性柱拆分了15种外消旋化合物,其中特罗格尔碱、吡喹酮、3-苄氧基-1,2-丙二醇、1,2-环氧己烷、3-羟基-2-丁酮、2-甲基四氢呋喃-3-酮、异丙基缩水甘油醚达到基线分离;还分离了10种苯系位置异构体,o,m,p-氨基苯酚、o,p-氯苯酚、o,m,p-碘苯胺、o,m,p-甲苯胺、o,m,p-二硝基苯、o,m,p-氯苯胺、o,m,p-硝基苯酚、o,m,p-溴苯胺达到基线分离。实验表明,L-Glu手性硅胶球在手性分离方面具有良好的可行性,与普通硅胶相比不需要进一步修饰就可以有较好的手性分离效果,是一种低成本、制备便捷的手性无机硅胶固定相。

Natural and Artificial Chiral-Based Systems for Separation Applications

Chiral separation has attracted much attention for basic research and industrial applications in analytical chemistry. Generally, chiral separations use natural or artificial chiral-based materials as adsorbents. To improve the precision and efficiency of chiral separation, focus has shifted from natural and synthetic adsorbents to binary combinations of materials. This review specifically summarizes the significant advancements made in natural and artificial chiral adsorbents as promising candidates for diverse drug and biomolecule separation applications as well as the remaining drawbacks and challenges for research on chiral separations. The mechanisms of chiral-based recognition and separation and history and development of natural and artificial chiral-based systems are the focus of this review. Future directions in natural and artificial chiral-based systems for practical separations and other applications are also presented.

Preparation of a novel hydroxypropyl-γ-cyclodextrin functionalized monolith for separation of chiral drugs in capillary electrochromatography

In this study, a novel hydroxypropyl-γ-cyclodextrin (HP-γ-CD) functionalized monolithic capillary column was prepared by one-pot sequential strategy and used for chiral separation in capillary electrochromatography for the first time. In one pot, GMA-HP-γ-CD as functional monomer was allowed to be formed via the ring opening reaction between HP-γ-CD and glycidyl methacrylate (GMA) catalyzed by 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and then copolymerized directly with ethylene dimethacrylate (EDMA) and 2-acrylamido-2-methyl propane sulfonic acid (AMPS) in the presence of porogenic solvents via thermally initiated free radical polymerization. The preparation conditions of monoliths were optimized. Enantiomer separations of six chiral drugs including pindolol, clorprenaline, tulobuterol, clenbuterol, propranolol, and tropicamide were achieved on the monolith. Among them, pindolol, clorprenaline, and tropicamide were baseline separated with resolution values of 1.62, 1.73, and 1.55, respectively. The mechanism of enantiomer separation was discussed by comparison of the HP-γ-CD and HP-β-CD functionalized monoliths.

Chiral Graphene Hybrid Materials: Structures, Properties, and Chiral Applications

Chirality has become an important research subject. The research areas associated with chirality are under substantial development. Meanwhile, graphene is a rapidly growing star material and has hard-wired into diverse disciplines. Rational combination of graphene and chirality undoubtedly creates unprecedented functional materials and may also lead to great findings. This hypothesis has been clearly justified by the sizable number of studies. Unfortunately, there has not been any previous review paper summarizing the scattered studies and advancements on this topic so far. This overview paper attempts to review the progress made in chiral materials developed from graphene and their derivatives, with the hope of providing a systemic knowledge about the construction of chiral graphenes and chiral applications thereof. Recently emerging directions, existing challenges, and future perspectives are also presented. It is hoped this paper will arouse more interest and promote further faster progress in these significant research areas.

History, advancement, bottlenecks, and future of chiral capillary electrochromatography

Capillary electrochromatography (CEC) represents a technique with less than 30 years of intense development and in this period this technique has seen huge promise, fast development, stagnation, and significant decline of innovative activity. The major goal of the present overview is not to present an extensive review of the literature on chiral CEC but to analyze the reasons for this dramatic development and attempting to answer questions such as: 1) Was the potential of CEC reasonably evaluated in 1990s before starting the explosive development in this field? 2) Did the development of this technique take the right track? 3) What other developments and competitive trends led to stagnation in the advancement of CEC? 4) Why is the activity in this field currently decreasing? 5) What are the current challenges and promises and what is the future of chiral CEC?

Advancements of chiral molecularly imprinted polymers in separation and sensor fields: A review of the last decade

Since chiral recognition mechanism based on molecularly imprinted polymers immerged, it has assisted countless chemical and electrochemical analytical sample preparation techniques. It has done this by enhancing the enatioseparation abilities of these techniques. The preparation and optimization of chiral molecularly imprinted polymers (CMIPs) are two favored methods in the separation and sensor fields. This review aims to present an overview of advances in the preparation and application of CMIPs in analytical approaches in different available formats (eg. column, monolithic column, cartridge, membrane, nanomaterials, pipette tip and stir bar sorptive) over the last decade. In addition, progress in the preparation and development of CMIPs-based sensor fields have been also discussed. Finally, the main application challenges of CMIPs are also summarily explained, as well as upcoming prospects in the field.

Application of chiral chromatography in radiopharmaceutical fields: A review

Chiral column chromatography (CCC) is a revolutionary analytical methodology for the enantioseparation of novel positron emission tomography (PET) tracers in the primary stages of drug development. Due to the different behaviors of tracer enantiomers (e.g. toxicity, metabolism and side effects) in administrated subjects, their separation and purification is a challenging endeavor. Over the last three decades, different commercial chiral columns have been applied for the enantioseparation of PET-radioligand (PET-RL) or radiotracers (PET-RT), using high-performance liquid chromatography (HPLC). The categorization and reviewing of them is a vital topic. This review presents a brief overview of advances, applications, and future prospectives of CCC in radiopharmaceutical approaches. In addition, the effective chromatographic parameters and degravitation trends to enhance enantioseparation resolution are addressed. Moreover, the application and potential of chiral super fluidical chromatography (CSFC) as an alternative for enantioseparation in the field of radiopharmaceutical is discussed. Finally, the crucial application challenges of CCC are explained and imminent tasks are suggested.