Synthetic blood group antigens for anti-A removal device and their interaction with monoclonal anti-A IgM

Mechanisms of Formation of Antibodies against Blood Group Antigens That Do Not Exist in the Body

The system of the four different human blood groups is based on the oligosaccharide antigens A or B, which are located on the surface of blood cells and other cells including endothelial cells, attached to the membrane proteins or lipids. After transfusion, the presence of these antigens on the apical surface of endothelial cells could induce an immunological reaction against the host. The final oligosaccharide sequence of AgA consists of Gal-GlcNAc-Gal (GalNAc)-Fuc. AgB contains Gal-GlcNAc-Gal (Gal)-Fuc. These antigens are synthesised in the Golgi complex (GC) using unique Golgi glycosylation enzymes (GGEs). People with AgA also synthesise antibodies against AgB (group A [II]). People with AgB synthesise antibodies against AgA (group B [III]). People expressing AgA together with AgB (group AB [IV]) do not have these antibodies, while people who do not express these antigens (group O [0; I]) synthesise antibodies against both antigens. Consequently, the antibodies are synthesised against antigens that apparently do not exist in the body. Here, we compared the prediction power of the main hypotheses explaining the formation of these antibodies, namely, the concept of natural antibodies, the gut bacteria-derived antibody hypothesis, and the antibodies formed as a result of glycosylation mistakes or de-sialylation of polysaccharide chains. We assume that when the GC is overloaded with lipids, other less specialised GGEs could make mistakes and synthesise the antigens of these blood groups. Alternatively, under these conditions, the chylomicrons formed in the enterocytes may, under this overload, linger in the post-Golgi compartment, which is temporarily connected to the endosomes. These compartments contain neuraminidases that can cleave off sialic acid, unmasking these blood antigens located below the acid and inducing the production of antibodies.

Molecular deciphering of the ABO system as a basis for novel diagnostics and therapeutics in ABO incompatible transplantation

In recent years ABO incompatible kidney transplantation (KTx) has become a more or less clinical routine procedure with graft and patient survival similar to those of ABO compatible transplants. Antigen-specific immunoadsorption (IA) for anti-A and anti-B antibody removal constitutes in many centers an important part of the treatment protocol. ABO antibody titration by hemagglutination is guiding the treatment; both if the recipient can be transplanted as well as in cases of suspected rejections if antibody removal should be performed. Despite the overall success of ABO incompatible KTx, there is still room for improvements and an extension of the technology to include other solid organs. Based on an increased understanding of the structural complexity and tissue distribution of ABH antigens and the fine epitope specificity of the ABO antibody repertoire, improved IA matrices and ABO antibody diagnostics should be developed. Furthermore, understanding the molecular mechanisms behind accommodation of ABO incompatible renal allografts could make it possible to induce long-term allograft acceptance also in human leukocyte antigen (HLA) sensitized recipients and, perhaps, also make clinical xenotransplantation possible.

Selective capture of anti-A antibodies from human blood using a novel integrated bead and hollow fiber module

Anti-A/B antibody removal from blood in the peritransplantation period facilitates ABO-incompatible transplantation and significantly increases the donor pool. We have been developing an anti-A/B immunoadsorption device (BSAF), compatible with whole blood perfusion. The BSAF is based on integrated microfiltration hollow fibers with antibody capturing beads uniformly distributed within the fiber interstitial space. In this study we fabricated BSAF prototypes, appropriately scaled down from a conceptual clinical scale device. We then, for the first time, measured the time course of anti-A capture from blood samples recirculating through the scaled down BSAF devices. We observed a significant reduction in IgM (96% ± 5%, n = 5, p < 0.001), and IgG (81% ± 18%, n = 5, p < 0.05) anti-A antibody titers within 2 h. We did not observe a significant change between the initial and final values of hematocrit, total plasma protein concentration, plasma free hemoglobin concentration, and anti-B antibody titer over five experiments. In conclusion we showed that the BSAF modules selectively removed anti-A antibodies from blood in a simple one step process, without requiring a separate plasmapheresis unit.

Specific antibody filter (SAF) binding capacity enhancement to remove anti-A antibodies

Removal of Anti-A/B antibodies prior to ABO-incompatible transplantation can prevent hyperacute organ rejection. We are developing a specific antibody filter (SAF) device to selectively remove ABO blood group antibodies from the whole blood by utilizing immunoaffinity adsorption. The device consists of ultrafiltration hollow fiber membranes with synthetic antigens specific to bind blood group antibodies immobilized on the inner lumenal walls of the fibers. The aim of this study was to evaluate the effect of antigen molecular weight and surface activation process to increase the antibody binding capacity of the fiber membrane surface. A new higher molecular weight antigen Atri-pNSA-1000 compared with Atri-pNPA-30 (A-trisaccharide (Atri) conjugated to activated polymers of Mol. wt. 1000 kDa and 30 kDa, respectively) was employed to improve accessibility of the antigen to bind antibodies. Also, a cyanogen bromide (CNBr) based surface activation method mediated by TEA in neutral pH medium was used to enhance the number of active sites for antigen binding compared to a strong basic medium of NaOH. Using a CNBr/TEA activation method and by immobilizing Atri-pNSA-1000 antigen, an antibody binding capacity (∼0.01 monoclonal anti-A IgM nmol/cm(2)) was achieved on the fiber surface. This binding capacity was sufficient to reduce monoclonal antibody titer from 1:128 to final titer below 1:4 with a surface area to volume ratio that is similar to commercial dialysis device (∼1.1 m(2) surface area for an average body blood volume of 5 L).

High molecular weight blood group A trisaccharide-polyacrylamide glycoconjugates as synthetic blood group A antigens for anti-A antibody removal devices

Specific immunoadsorption of blood group antibodies by synthetic antigens immobilized on support matrices in the peri-transplantation period provides a promising solution to hyperacute rejection risk following ABO-incompatible transplantation. In this study, we investigated binding interactions between anti-A antibodies and synthetic blood group A trisaccharide conjugated with polyacrylamide of different molecular weights (30 and 1000 kDa). The glycopolymers were equipped with biotin tags and deposited on streptavidin-coated sensor chips. The affinity and kinetics of anti-A antibodies binding to glycoconjugates were studied using surface plasmon resonance (SPR). The high molecular weight conjugate (Atri-PAA(1000)-biotin) enhanced antibody binding capacity by two to three fold compared with the low molecular weight conjugate (Atri-PAA(30)-biotin), whereas varying the carbohydrate content in Atri-PAA(1000)-biotin (20 mol % or 50 mol %) did not affect antibody binding capacity of the glycoconjugate. The obtained results suggest that immunoadsorption devices, especially hollow fiber-based antibody filters which are limited in available surface area for antigen immobilization, may greatly benefit from the new synthetic high molecular weight polyacrylamide glycoconjugates.

Monoclonal anti-A antibody removal by synthetic A antigen immobilized on specific antibody filters

Removal of blood group anti-A and anti-B antibodies can prevent hyperacute organ rejection in ABO-incompatible transplantation. We are developing an extracorporeal-specific antibody filter (SAF) as an immunoadsorption device for direct removal of ABO blood group antibodies from whole blood, without the need for plasma separation and plasma exchange. A hollow fiber-based small scale SAF (mini-SAF) device was fabricated and synthetic A antigen, Atrisaccharide (Atri) conjugated to activated polyacrylic acid, was immobilized on the fiber lumen surface. Monoclonal antibody anti-A IgM were specifically removed up to 70% of initial antibodies using mini-SAF device. The monoclonal anti-A capture experiments on mini-SAF indicated that antibody removal relative to the initial concentration is independent of inlet concentration in the beginning; however, as the surface starts saturating with bound antibodies, removal becomes dependent on inlet concentration. No significant effect of flow rate on removal rate was observed. The radial diffusion and axial convection-based mathematical model developed for unsteady state antibody removal was in good agreement with the experimental data and showed that the antibody removal rate can be maximized by increasing the antibody-binding capacity of the SAF.