The sonochemical decolourisation of textile azo dye Orange II: effects of Fenton type reagents and UV light

Application of physicochemical techniques to the removal of ammonia nitrogen from water: a systematic review

Ammonia nitrogen is a common pollutant in water and soil, known for its biological toxicity and complex removal process. Traditional biological methods for removing ammonia nitrogen are often inefficient, especially under varying temperature conditions. This study reviews physicochemical techniques for the treatment and recovery of ammonia nitrogen from water. Key methods analyzed include ion exchange, adsorption, membrane separation, struvite precipitation, and advanced oxidation processes (AOPs). Findings indicate that these methods not only remove ammonia nitrogen but also allow for nitrogen recovery. Ion exchange, adsorption, and membrane separation are effective in separating ammonia nitrogen, while AOPs generate reactive species for efficient degradation. Struvite precipitation offers dual benefits of removal and resource recovery. Despite their advantages, these methods face challenges such as secondary pollution and high energy consumption. This paper highlights the development principles, current challenges, and future prospects of physicochemical techniques, emphasizing the need for integrated approaches to enhance ammonia nitrogen removal efficiency.

An introductory laboratory class in sonochemistry

This article proposes a substantive scope and scenario of a laboratory class that introduces students to the field of sonochemistry. The class requires only basic laboratory equipment - typical laboratory glassware like graduated pipettes and conical flasks, as well as simple inorganic chemicals. It is designed to acquaint students with fundamental aspects of sonochemistry. In the qualitative aspect, they will conduct and observe some sonochemical reactions like a synthesis of hydrogen peroxide and ultrasound-assisted degradation of toxic chromates(VI) which will demonstrate the indirect consequences of water sonolysis which is the most basic sonochemical reaction, as well as they will illustrate the applications of sonochemistry. In the quantitative aspect, students will learn about how to measure the power of ultrasound and the sonochemical efficiency of the reaction and will conduct experiments allowing for the calculation of these parameters. Finally, an introduction to and demonstration of the sonocatalytic effect is planned. An evaluation system, consisting of a report and test, is also proposed.

Recent progress on sonochemical production for the synthesis of efficient photocatalysts and the impact of reactor design

Sonochemical-assisted synthesis has flourished recently for the design of photocatalysts. The main power used is ultrasound that allows the nanomaterials shape and size modification and control. This review highlights the effect in formation mechanism by ultrasound application and the most common photocatalysts that were prepared via sonochemical techniques. Moreover, the challenge for the suitable reactor design for the synthesis of materials or for their photocatalytic evaluation is discussed since the most prominent reactor systems, batch, and continuous flow, has both advantages and drawbacks. This work summarises the significance of sonochemical synthesis for photocatalytic materials as a green technology that needs to be further investigated for the preparation of new materials and the scale up of developed reactor systems to meet industrial needs.

State of Art and Perspectives in Catalytic Ozonation for Removal of Organic Pollutants in Water: Influence of Process and Operational Parameters

The number of organic pollutants detected in water and wastewater is continuously increasing thus causing additional concerns about their impact on public and environmental health. Therefore, catalytic processes have gained interest as they can produce radicals able to degrade recalcitrant micropollutants. Specifically, catalytic ozonation has received considerable attention due to its ability to achieve advanced treatment performances at reduced ozone doses. This study surveys and summarizes the application of catalytic ozonation in water and wastewater treatment, paying attention to both homogeneous and heterogeneous catalysts. This review integrates bibliometric analysis using VOS viewer with systematic paper reviews, to obtain detailed summary tables where process and operational parameters relevant to catalytic ozonation are reported. New insights emerging from heterogeneous and homogenous catalytic ozonation applied to water and wastewater treatment for the removal of organic pollutants in water have emerged and are discussed in this paper. Finally, the activities of a variety of heterogeneous catalysts have been assessed using their chemical–physical parameters such as point of zero charge (PZC), pKa, and pH, which can determine the effect of the catalysts (positive or negative) on catalytic ozonation processes.

Possibilities and Limitations of the Sono-Fenton Process Using Mid-High-Frequency Ultrasound for the Degradation of Organic Pollutants

Mid-high-frequency ultrasound (200-1000 kHz) eliminates organic pollutants and also generates H₂O₂. To take advantage of H₂O₂, iron species can be added, generating a hybrid sono-Fenton process (sF). This paper presents the possibilities and limitations of sF. Heterogeneous (a natural mineral) and homogeneous (Fe²⁺ and Fe³⁺ ions) iron sources were considered. Acetaminophen, ciprofloxacin, and methyl orange were the target organic pollutants. Ultrasound alone induced the pollutants degradation, and the dual competing role of the natural mineral (0.02-0.20 g L^-1) meant that it had no significant effects on the elimination of pollutants. In contrast, both Fe²⁺ and Fe³⁺ ions enhanced the pollutants' degradation, and the elimination using Fe²⁺ was better because of its higher reactivity toward H₂O₂. However, the enhancement decreased at high Fe²⁺ concentrations (e.g., 5 mg L^-1) because of scavenger effects. The Fe²⁺ addition significantly accelerated the elimination of acetaminophen and methyl orange. For ciprofloxacin, at short treatment times, the degradation was enhanced, but the pollutant complexation with Fe³⁺ that came from the Fenton reaction caused degradation to stop. Additionally, sF did not decrease the antimicrobial activity associated with ciprofloxacin, whereas ultrasound alone did. Therefore, the chemical structure of the pollutant plays a crucial role in the feasibility of the sF process.

Photo-Fenton Degradation of Ciprofloxacin by Novel Graphene Quantum Dots/α-FeOOH Nanocomposites for the Production of Safe Drinking Water from Surface Water

In the current work, novel graphene quantum dots (GQDs)-doped goethite (α-FeOOH) nanocomposites (GQDs/α-FeOOH) were prepared by following a feasible hydrolysis method and applied for ciprofloxacin (CIP) removal. Results showed that the CIP degradation efficiency was significant (93.73%, 0.0566 min−1) in the GQDs/α-FeOOH + H2O2 + Vis system using much lower amounts of H2O2 (0.50 mM), which is 3.9 times the α-FeOOH + H2O2 + Vis system. It was found that •OH, O2•−, and 1O2 were mainly responsible for CIP degradation in the GQDs/α-FeOOH photo-Fenton system. GQDs/α-FeOOH demonstrated broad-spectrum UV–vis-IR responsiveness in the degradation of ciprofloxacin as a function of the doping of GQDs. Additionally, GQDs/α-FeOOH showed outstanding durability (recyclability up to 3 cycles with a lower iron leaking amount, 0.020 mg L−1), a broad range of application pH, and a pretty acceptable catalytic efficacy in a variety of surface water matrices. Overall, GQDs/α-FeOOH have been shown to be an effective photocatalyst for the remediation of emerging contaminants via the workable exploitation of solar energy.

Utilization of solar energy for wastewater treatment: Challenges and progressive research trends

This article offers a trend of inventions and implementations of photocatalysis process, desalination technologies and solar disinfection techniques adapted particularly for treatment of industrial and domestic wastewater. Photocatalysis treatment of wastewater using solar energy is a promising renewable solution to reduce stresses on global water crisis. Rendering to the United Nation Environment Programme, 1/3 of world population live in water-stressed countries, while by 2025 about 2/3 of world population will face water scarcity. Major pollutants exhibited from numerous sources are critically discussed with focus on potential environmental impacts & hazards. Treatment of wastewater by photocatalysis technique, solar thermal electrochemical process, solar desalination of brackish water and solar advanced oxidation process have been presented and systematically analysed with challenges. Both heterogenous and homogenous photocatalysis techniques employed for wastewater treatment are critically reviewed. For treating domestic wastewater, solar desalination technologies adopted for purifying brackish water into potable water is presented along with key challenges and remedies. Advanced oxidation process using solar energy for degradation of organic pollutant is an important technique to be reviewed due to their effectiveness in wastewater treatment process. Present article focused on three key issues i.e. major pollutants, wastewater treatment techniques and environmental benefits of using solar power for removal of pollutants. The review also provides close ideas on further research needs and major concerns. Drawbacks associated with conventional wastewater treatment options and direct solar energy-based wastewater treatment with energy storage systems to make it convenient during day and night both listed. Although, energy storage systems increase the overall cost of the wastewater treatment plant it also increases the overall efficiency of the system on environmental cost. Cost-efficient wastewater treatment methods using solar power would significantly ensure effective water source utilization, thereby contributing towards sustainable development goals.

Synergistic effect of sonication on photocatalytic oxidation of pharmaceutical drug carbamazepine

Photocatalytic, sono-photocatalytic oxidation of pharmaceutical drug of carbamazepine was successfully carried out using Ag/AgCl supported BiVO4 catalyst. For this purpose, firstly, photocatalytic oxidation was optimized by central composite design methodology and then synergistic effect of sonication was investigated. Low frequency (20 kHz) probe type and high frequency (850 kHz) plate type sonication at pulse and continuous mode were studied to degrade the carbamazepine (CBZ) containing wastewater. Pulse duties of 1:5 and 5:1 (on : off) were tested using the high frequency sonication system in the sono-photocatalytic oxidation of CBZ. The effects of frequency, power density measured from calorimetry by changing amplitudes were discussed in the sono-photocatalytic oxidation of CBZ. Complete carbamazepine removal was achieved at the optimum conditions of 5 ppm CBZ initial concentration with 1.5 g/L of catalysts loading and at an alkaline pH of 10 at the end of 4 h of photocatalytic reaction under visible LED light irradiation. Both low frequency and high frequency sonication systems caused an increase in photocatalytic efficiency in a shorter treatment time of 60 min. CBZ removal increased from 44% to 65.42% in low frequency sonication of 20 kHz at the amplitude of 20% (0.15 W/mL power density). In the case of high frequency ultrasonic system (850 kHz), CBZ removal increased significantly from 44% to 89.5 % at 75% amplitude (0.12 W/mL power density) within 60 min of reaction. Continuous mode sonication was observed to be more effective than that of pulse mode sonication not only for degradation efficiency and also for electrical energy consumption needed to degrade CBZ. Sono-catalytic oxidation was also conducted with simulated wastewater that contains SO42-, CO32-, NO3-, Cl- anions and natural organic component of fulvic acid. The CBZ degradation was inhibited slightly in the presence of NO3- and Cl-, and fulvic acid, however, the existence of SO42- and CO32- increased the degradation degree of CBZ. Toxicity tests were performed to determine the toxicity of untreated CBZ, and treated CBZ by photocatalytic, and sono-photocatalytic oxidations.

Application of hybrid oxidative processes based on cavitation for the treatment of commercial dye industry effluents

The present work demonstrates the significant role of ultrasound (US) in intensifying the efficacy of the combination with Fenton reagent and/or ozone for the treatment of real dye industry industrial effluent procured from the local industry. Initial part of the work focused on analysing the literature based on combination approaches of US with different oxidants applied for the treatment of real and simulated effluents focusing on the dyes. The work also provides guidelines for the selection of optimal operating parameters for maximizing the intensification of the degradation. The second part of the work presents an experimental study into combined approaches of ultrasound with ozone (O3) and Fenton's reagent for treatment of real effluent. Under optimized conditions (100 W, 20 kHz and duty cycle of 70%), maximum COD reductions of 94.79% and 51% were observed using a combined approach of US + Fenton oxidation followed by lime treatment for the treatment of effluent-I and effluent-II respectively at H2O2 loading of 17.5 g/L, H2O2/Fe2+ ratio of 3, pH of 4, CaO dose of 1 g/L and an overall treatment time of 70 min. US + Fenton + O3 followed by lime was also applied for treatment under ozone loading of 1 g/h for the treatment of effluent-I and it was found that maximum COD reduction of 95.12% was obtained within 30 min of treatment time, indicating use of ozone did not result in significant value addition in terms of COD reduction but resulted in faster treatment. HC (inlet pressure: 4 bar) + Fenton + Lime scheme was successfully replicated on a pilot-scale resulting in maximum COD reduction of 57.65% within 70 min of treatment time. Overall, it has been concluded that the hybrid oxidative processes as US + Fenton followed by lime treatment is established as the best approach ensuring effective COD reduction at the same time obtaining final colourless/reusable effluent.

Synergetic decolorization of azo dyes using ultrasounds, photocatalysis and photo-fenton reaction

In the present work, ultrasound irradiation, photocatalysis with TiO₂, Fenton/Photo-Fenton reaction, and the combination of those techniques were investigated for the decolorization of industrial dyes in order to study their synergy. Three azo dyes were selected from the weaving industry. Their degradation was examined via UV illumination, Fenton and Photo-Fenton reaction as well as ultrasound irradiation at low (20 kHz) and high frequencies (860 kHz). In these experiments, we investigated the simultaneous action of the ultrasound and UV irradiation by varying parameters like the duration of photocatalysis and ultrasound irradiation frequency. At the same time, US power, temperature, amount of TiO₂ photocatalyst and amount of Fenton reagent remained constant. Due to their diverse structure, each azo dye showed different degradation levels using different combinations of the above-mentioned Advanced Oxidation Processes (AOPs). The Photo-Fenton reagent is more effective with US 20 kHz and US 860 kHz for the azo dyes originated from the weaving industry at pH = 3 as compared to pH = 6.8. The combination of the Photo-Fenton reaction with 860 kHz ultrasound irradiation for the same dye gave an 80% conversion at the same time. Experiments have shown a high activity during the first two hours. After that threshold, the reaction rate is decreased. FT-IR and TOC measurements prove the decolorization due to the destruction of the chromophore groups but not complete mineralization of the dyes.

Underwater microplasma bubbles for efficient and simultaneous degradation of mixed dye pollutants

Complete degradation of mixtures of organic pollutants is a major challenge due to their diverse degradation pathways. In this work, a novel microplasma bubble (MPB) reactor was developed to generate plasma discharges inside small forming bubbles as an effective mean of delivering reactive species for the degradation of the target organic contaminants. The results show that the integration of plasma and bubbles resulted in efficient degradation for all azo, heterocyclic, and cationic dyes, evidenced by the outstanding energy efficiency of 13.0, 18.1 and 22.1 g/kWh with 3 min of processing, in degrading alizarin yellow (AY), orange II (Orng-II) and methylene blue (MB), individually. The MPB treatment also effectively and simultaneously degraded the dyes in their mixtures such as AY + Orng-II, AY + MB and AY + Orng-II + MB. Scavenger assays revealed that the short-lived reactive species, including the hydroxyl (OH) and superoxide anion (O₂^-) radicals, played the dominant role in the degradation of the pollutants. Possible degradation pathways were proposed based on the intermediate products detected during the degradation process. The feasibility of this proposed strategy was further evaluated using other common water pollutants. Reduced toxicity was confirmed by the observed increases in human cell viability for the treated water. This work could support the future development of high performance- and energy-efficient wastewater abatement technologies.

A comprehensive review on the integration of advanced oxidation processes with biodegradation for the treatment of textile wastewater containing azo dyes

The threat of dye contamination has achieved an unsurpassed abnormal state lately due to their massive consumption in several enterprises including textile, leather, cosmetic, plastic, and paper industries. This review focuses on the integrations of various advanced oxidation processes (AOPs), such as Fenton, photocatalysis, and ozonation, with biodegradation for the treatment of textile azo dyes. Such integrations have been explored lately by researchers to bring down the processing cost and improve the degree of mineralization of the treated dyeing wastewater. The review refers to the basic mechanisms, the influence of various process parameters, outcomes of recent works, and future research directions. All the three AOPs, independently, demonstrated substantial color reduction of 54–100%. The ozonation process, stand-alone, showed the most efficient decolorization (of 88–100%) consistently in all reviewed research works. In contrast, all three AOPs independently offered varied and inadequate COD reduction in the range of 16–80%. The AOPs, after getting integrated with biodegradation, yielded an additional reduction (of 11–70%) in the COD-levels and (of 16–80%) in the TOC-levels. Further, the integration of AOPs with biodegradation has potential to significantly reduce the treatment costs. The review suggests further research efforts in the direction of sequencing chemical and biological routes such that their synergistic utilization yield complete detoxification of the textile azo dyes economically at large-scale.

Sonochemical degradation of poly- and perfluoroalkyl substances - A review

Poly- and perfluoroalkyl substances (PFAS) have received considerable attention from environmental scientists and engineers because of their stability and widespread. Sonochemical process has been widely used in the environmental field to remove pollutants due to its advantages in terms of operational simplicity, no secondary pollutant formation and safety. Currently, many studies have reported sonochemical degradation of various PFAS in laboratory settings and showed excellent removal potential. This article reviewed the effects of different power densities, ultrasonic frequencies, temperatures, atmosphere conditions, additives, and initial concentration and chemical properties of PFAS on the sonochemical degradation of PFAS. Sonochemical methods combined with conventional techniques for PFAS removal were elaborated as well. Additionally, this article discussed the challenges and prospects of using sonochemical approaches for PFAS remediation.

Synergistic Effect of Microwave Calcination and Sonophotocatalytic Activity of TiO2-Montmorillonite on The Degradation of Direct Yellow 106 and Disperse Violet 1

The TiO2-pillared montmorillonite nanoparticles (TiO2-Mt) were prepared by the sol-gel method, then applied for the elimination of dyes in solution: CI Direct Yellow 106 (DY106) (azo dye) and CI Disperse Violet 1 (DV1) (anthraquinone dye) by the sonocatalytic, photocatalytic and sonophotocatalytic processes, in order to test the efficiency of photocatalysts, while photolysis, sonolysis, and sonophotolysis tests have been done previously. The photocatalysts (TiO2-Mt) were characterized by X-ray Diffraction (XRD), X-ray Fluorescence analysis (XRF), Brunauer-Emmet-Teller (BET), Scanning Electron Microscopy (SEM) methods, thermal and thermogravimetric analysis (TG/DTA) and the zero load point (pHpzc). Aqueous solutions of dye of an initial concentration (50 mg/L), in the presence of 1 g/L of photocatalyst, were irradiated using a mercury lamp (Hg) of 40 Mw/cm2 and put in contact with an ultrasonic probe with a frequency of 20 kHz and a power of 750 W, providing the ultrasound. The results obtained indicate that a weak, good and better dye degradation rate has been observed successively by the application of the sonocatalytic, photocatalytic and sonophotocatalytic processes, where the latter has shown a synergistic effect, while the photocatalyst TiO2-Mt/MW showed significant efficiency during the degradation, due to the beneficial effect of the microwave calcination mode. Copyright © 2020 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Decolorization of methylene blue using Fe(III)-citrate complex in a solar photo-Fenton process: impact of solar variability on process optimization

This study investigates the solar photo-Fenton based decolorization of a cationic dye methylene blue (MB) at circumneutral pH conditions. Water-soluble Fe(III)-citrate complex was used as a source of Fe(II) during the reaction by ligand-to-metal charge transfer under solar irradiation, and consequently, for the production of hydroxyl radicals. Solar decolorization of methylene blue was studied in sunny as well as cloudy weather, and further optimized using response surface methodology and Box-Behnken statistical experimental design. In this model, Fe(III) dose, citrate ion dose, and initial pH of the solution were used as independent parameters, and percentage decolorization of MB was used as a response. Better decolorization of MB was observed in sunny weather as compared to cloudy weather. A particular combination of parameters, i.e. pH of 7, Fe(III) of 0.5 mM, and citrate ion concentration of 10 mM, was found to achieve 89.19% and 51.22% decolorization in sunny and in cloudy weather respectively, which were the optimum/near-optimum performances for these weather conditions. Hence the process initiated with these parameters may potentially achieve better performance than any other parameter combination in all weathers, although the absolute removal would still depend on incident solar irradiation.

Performance of SiO2/Ag Core/Shell particles in sonocatalalytic degradation of Rhodamine B

In this study, SiO₂/Ag Core/Shell nanoparticles was prepared and sonocatalytic activity of prepared catalyst was investigated by using Rhodamine B as model contaminant, at 35 kHz using ultrasonic power of 160 W within 90 min. The change in efficiency in the sonocatalytic degradation of Rhodamine B catalyzed by SiO₂/Ag Core/Shell nanoparticles with respect to the initial concentration of dye, catalyst amount and temperature were firstly investigated. Optimal conditions were found as follows: catalyst amount = 15 mg/L, Temperature = 25 °C and initial concentration of dye = 10 ppm. Influence factors such as pH of solution, O₂ saturation of solution and the concentration of H₂O₂ added to the solution, on degradation efficiency in presence of catalyst, were investigated. SiO₂/Ag Core/Shell nanoparticles showed higher sonocatalytic activity at pH = 7 with respect to acidic and alkaline conditions. Degradation efficiency was reached up to 67% in experiments which air pumped (0.6 L/min) through the solution with in 90 min. It was observed that the dye removal increased via increase while H₂O₂ concentration lower than 10 mM. Higher concentration of H₂O₂ than the optimal concentration had adverse effect on degradation efficiency. Our results showed that the SiO₂/Ag Core/Shell nanoparticles were active catalyst for sonocatalytic degradation of dyes. Reusability of the catalyst was investigated.

Horseradish peroxidase-mediated decolourization of Orange II: modelling hydrogen peroxide utilization efficiency at different pH values

Enzymatic decolourization of azo-dyes could be a cost-competitive alternative compared to physicochemical or microbiological methods. Stoichiometric and kinetic features of peroxidase-mediated decolourization of azo-dyes by hydrogen peroxide (P) are central for designing purposes. In this work, a modified version of the Dunford mechanism of peroxidases was developed. The proposed model takes into account the inhibition of peroxidases by high concentrations of P, the substrate-dependant catalatic activity of peroxidases (e.g. the decomposition of P to water and oxygen), the generation of oxidation products (OP) and the effect of pH on the decolourization kinetics of the azo-dye Orange II (OII). To obtain the parameters of the proposed model, two series of experiments were performed. In the first set, the effects of initial P concentration (0.01-0.12 mM) and pH (5-10) on the decolourization degree were studied at a constant initial OII concentration (0.045 mM). Obtained results showed that at pH 9-10 and low initial P concentrations, the consumption of P was mainly to oxidize OII. From the proposed model, an expression for the decolourization degree was obtained. In the second set of experiments, the effect of the initial concentrations of OII (0.023-0.090 mM), P (0.02-4.7 mM), HRP (34-136 mg/L) and pH (5-10) on the initial specific decolourization rate (q₀) was studied. As a general rule, a noticeable increase in q₀ was observed for pHs higher than 7. For a given pH, q₀ increased as a function of the initial OII concentration. Besides, there was an inhibitory effect of high P concentrations on q₀. To asses the possibility of reusing the enzyme, repeated additions of OII and P were performed. Results showed that the enzyme remained active after six reuse cycles. A satisfactory accordance between the change of the absorbance during these experiments and absorbances calculated using the proposed model was obtained. Considering that this set of data was not used during the fitting procedure of the model, the agreement between predicted and experimental absorbances provides a powerful validation of the model developed in the present work.

Enhanced removal of basic violet 10 by heterogeneous sono-Fenton process using magnetite nanoparticles

The removal of basic violet 10 (BV10), which is known as a cationic dye, from aqueous solution was studied by employing a heterogeneous sono-Fenton process over the nano-sized magnetite (Fe₃O₄) which had been prepared by the milling of magnetite mineral using a high-energy planetary ball milling process. The magnetite samples were characterized using the X-ray diffraction (XRD), high resolution scanning electron microscopy (HR-SEM), energy-dispersive X-ray spectroscopy (EDX), Brunauer-Emmett-Teller (BET), Fourier transform infrared spectroscopy (FTIR), and inductively couple plasma mass spectrometer (ICP-MS). It was found that the catalytic activity of the ball-milled magnetite sample was enhanced along with the improvement in its physicochemical properties; also, the ball-milled magnetite of 6 h displayed the highest catalytic activity in BV10 removal by the heterogeneous sono-Fenton process as compared with that for 4 h (66.12% after 120 min) and 2 h (48% after 120 min).The effect of operational parameters, namely, pH solution, catalyst dosage, the initial H₂O₂ concentration, ultrasonic power and the initial BV10 concentration, on the removal efficiency (RE%) of BV10 was investigated. The optimum conditions for the BV10 RE% were: the pH value of 3, the catalyst dosage of 1.5 g L^-1, the initial H₂O₂ concentration of 36 mM, the ultrasonic power of 450 W L^-1, and the initial BV10 concentration of 30 mg L^-1. The RE% of BV10 was 75.94% at these conditions after the reaction time of 120 min. The trapping experiments revealed that OH radicals were the dominant oxidative species, but O₂^-/HO₂ radicals also had a partial role in the removal of BV10.The reusability of the magnetite nanoparticles revealed about 28% decrease in the removal efficiency within five consecutive runs. The results obtained through GC-MS analysis also confirmed the efficient removal of BV10 molecules in the aqueous solution during the process.

Ultrasonic Destruction of Acid Orange 7: Effect of Humic Acid, Surfactants and Complex Matrices

  The ultrasonic degradation at 600 kHz of an azo dye, acid orange 7 (AO7), in the presence of various dissolved natural organic matters (humic acid and surfactants) and in environmentally relevant matrices (natural water and seawater) was investigated. Additionally, the dependence of AO7 degradation on several operating parameters was clarified. The obtained results showed that ultrasound completely destroyed AO7 in 90 min of treatment but only 10% of TOC was removed after a long irradiation time. Investigations using the radical scavengers tert-butyl alcohol and KI revealed that AO7 degradation proceeds through radical reactions occurring at the bubble-liquid interface. AO7 conversion was strongly affected by the operating conditions. While the degradation of the dye was not affected by the presence of humic acid, it was impacted negatively by the presence of surfactants. Replacing deionized water by natural water and seawater as real environmental matrices did not affect the degradation of the dye.

Dynamic behavior of hydroxyl radical in sono-photo-Fenton mineralization of synthetic municipal wastewater effluent containing antipyrine

The aim of this study was to examine the kinetics of the different mechanisms (radical pathway, photolysis, molecular reaction with H₂O₂ and reaction with ultrasonically generated oxidative species) involved in the homogeneous sono-photoFenton (US/UV/H₂O₂/Fe) mineralization of antipyrine present in a synthetic municipal wastewater effluent (ASMWE). The dynamic behavior of hydroxyl (HO) radical generation and consumption in mineralization reaction under different systems was investigated by measuring hydroxyl radical concentration during the reaction. The overall mineralization process was optimized using a Central-Composite Experimental Design (CCED) with four variables (initial concentrations of H₂O₂ and Fe(II), amplitude and pulse length). The response functions (pseudo-first order mineralization kinetic rate constants) were fitted using neural networks (NNs). Under the optimal conditions ([H₂O₂]_o=500mgL^-1, [Fe(II)]_o=27mgL^-1, Amplitude (%)=20andPulse length=1), the TOC removal was 79% in 50min. The radical reaction in the bulk solution was found be the primary mineralization pathway (94.8%), followed by photolysis (3.65%), direct reaction with H₂O₂ (0.86%), and reaction by ultrasonically generated oxidative species (0.64%). The role of the Fe catalyst on the radical reaction and the presence of refractory intermediates towards hydroxyl radical were also studied.

Electro-assisted heterogeneous activation of persulfate by Fe/SBA-15 for the degradation of Orange II

The removal of Orange II by activation of persulfate (S2O8(2-), PS) using synthesized Fe/SBA-15 in the electrochemical (EC) enhanced process was reported in this study. The reaction rate constants, degradation mechanism, catalyst stability, and evolution of mineralization and toxicity were detailed investigated. On the basis of radical scavenger results, both the sulfate radicals (SO4(-)) and hydroxyl radicals (OH) were responsible for the degradation of Orange II. A possible pathway is suggested to describe the degradation of Orange II according to the degradation intermediates identified. The results showed that the Fe/SBA-15 catalyst maintained strong reusability and stability with a low level of iron leaching. In addition, favorable mineralization efficiency in terms of COD removal efficiency (75.4%) and TOC removal efficiency (46.3%) was obtained when the reaction time was prolonged to 24h. The toxicity experiments implied that the toxicity of the treated solution ascended at the first 30min but then dropped to almost zero eventually. This study provides a proof-of-concept that can be applied widely for the PS remediation of contaminated water.

Sonochemical co-deposition of antibacterial nanoparticles and dyes on textiles

The sonochemical technique has already been proven as one of the best coating methods for stable functionalization of substrates over a wide range of applications. Here, we report for the first time on the simultaneous sonochemical dyeing and coating of textiles with antibacterial metal oxide (MO) nanoparticles. In this one-step process the antibacterial nanoparticles are synthesized in situ and deposited together with dye nanoparticles on the fabric surface. It was shown that the antibacterial behavior of the metal oxides was not influenced by the presence of the dyes. Higher K/S values were achieved by sonochemical deposition of the dyes in comparison to a dip-coating (exhaustion) process. The stability of the antibacterial properties and the dye fastness was studied for 72 h in saline solution aiming at medical applications.

HKUST-1-MOF–BiVO4 hybrid as a new sonophotocatalyst for simultaneous degradation of disulfine blue and rose bengal dyes: optimization and statistical modelling

A new hybrid material composed of BiVO₄ and HKUST-1 MOF (HKUST-1-MOF–BiVO₄), which is active under blue light irradiation, was synthesized and characterized by XRD, FE-SEM, BET, BJH, EDS and DRS analysis.

Production of clinoptilolite nanorods by glow discharge plasma technique for heterogeneous catalytic ozonation of nalidixic acid

This study investigates nalidixic acid degradationviaheterogeneous catalytic ozonation using clinoptilolite nanorods (CNs) as a novel nanocatalyst.

Heterogeneous activation of hydrogen peroxide using γ-Al2O3 supported bimetallic Fe, Mn for the degradation of reactive black 5

A Fe–Mn/γ-Al₂O₃ catalyst was prepared via a wet impregnation method and used for the degradation of reactive black 5 (RB5) as an activator of hydrogen peroxide (H₂O₂).

Recent advances and prospects of catalytic advanced oxidation process in treating textile effluents

In the past few years, there have been many researches on the use of different types of homogenous catalyst for the degradation of textile wastewater in conventional advanced oxidation processes (AOPs). However, homogenous AOPs suffer from few limitations, including large consumption of chemicals, acidic pH, high cost of hydrogen peroxide, generation of iron sludge, and necessity of post-treatment. Therefore, recently, there have been more researches that focus on improving the performance of conventional AOPs using heterogeneous catalysts such as titanium dioxide, nanomaterials, metal oxides, zeolite, hematite, goethite, magnetite, and activated carbon (AC). Besides, different supports such as AC that have been incorporated with transition metals and clays have been proven to have excellent catalytic activity in AOPs. This paper presents a comprehensive review of advances and prospects of catalytic AOPs for the decontamination of a wide range of synthetic and real textile wastewater. This review provides an up-to-date critical review of the information on the degradation of various textile dyes by a wide range of heterogeneous catalysts and adsorbents. The future challenges of AOPs, including chemical consumption, toxicity assessment, reactor design, and limitation of catalysts, are discussed in this paper. In addition, this paper also discusses the presence of ions, generation of by-products, and industrial applications of AOPs. Special emphasis is given to recent studies and large-scale combination of AOPs for wastewater treatment. This review paper concludes that more studies are needed for the kinetics, reactor design, and modeling of hybrid AOPs and the production of their corresponding intermediate products and secondary pollutants. A better economic model should also be developed to predict the cost of AOPs, as the treatment cost varies with dyes and textile effluents.

Integration of US/Fe(2+) and photo-Fenton in sequencing for degradation of landfill leachate

The landfill leachate treated by sonication in presence of Fe(2+) (US/Fe(2+)) and then by photo-Fenton achieved the highest total organic carbon (TOC) removal efficiency among the screened processes. The lower initial pH, dosage of Fe(2+) and initial concentration of leachate were helpful in raising TOC removal efficiency of leachate by US/Fe(2+). The optimal conditions for the US-photo-Fenton process were as follows: initial pH at 3.0, [H2O2]/[TOC0] at 2, [H2O2]/[Fe(2+)] at 5 and initial concentration of landfill leachate at 600 mg/L. The removal efficiency of TOC, chemical oxygen demand (COD) and 5-day biochemical oxygen demand (BOD5) were 68.3, 79.6 and 58.2%, while the BOD5/COD rose from 0.20 to 0.43 at optimum condition. Based on gas chromatography-mass spectrometry (GC-MS) results, 36 of a total of 56 pollutants were completely degraded by US-photo-Fenton treatment.

Ultrasound-assisted selective hydrogenation of C-5 acetylene alcohols with Lindlar catalysts

The selective hydrogenation of 2-methyl-3-butyn-2-ol (MBY) was performed in the presence of Lindlar catalyst, comparing conventional stirring with sonication at different frequencies of 40, 380 and 850 kHz. Under conventional stirring, the reaction rates were limited by intrinsic kinetics, while in the case of sonication, the reaction rates were 50-90% slower. However, the apparent reaction rates were found to be significantly frequency dependent with the highest rate observed at 40 kHz. The original and the recovered catalysts after the hydrogenation reaction were compared using bulk elemental analysis, powder X-ray diffraction and scanning and transmission electron microscopy coupled with energy-dispersive X-ray analysis. The studies showed that sonication led to the frequency-dependent fracturing of polycrystalline support particles with the highest impact caused by 40 kHz sonication, while monocrystals were undamaged. In contrast, the leaching of Pd/Pb particles did not depend on the frequency, which suggests that sonication removed only loosely-bound catalyst particles.

Real-time detection of hydrogen peroxide using microelectrodes in an ultrasonic enhanced heterogeneous Fenton process catalyzed by ferrocene

Microelectrodes were used for real-time detection of hydrogen peroxide (H2O2) in a heterogeneous sono-Fenton system with ferrocene as the catalyst. The working mechanism of reactive blue 13 decolorization in a heterogeneous sono-Fenton system was investigated. Ultrasonic irradiation showed no effect on decolorization when used alone and did not enhance decolorization in the H2O2 system (43.0 % for H2O2 vs. 48.1 % for US+H2O2). However, a system with the presence of Fenton-like reagents achieved complete decolorization. Decolorization was greatly accelerated by the addition of ultrasonic irradiation. Thorough decolorization was achieved in 20 min in the heterogeneous sono-Fenton system, which was 30 min faster than in the heterogeneous Fenton system. Based on the data collected by microelectrodes, accelerated decomposition of H2O2 was also observed. Ultrasonic irradiation aided the ferrocene catalyst in liberating more •OH from Fenton reactions, leading to the faster decolorization.

Heterogeneous photo-Fenton decolorization of Orange II over Al-pillared Fe-smectite: response surface approach, degradation pathway, and toxicity evaluation

A ferric smectite clay material was synthesized and further intercalated with Al2O3 pillars for the first time with the aim of evaluating its ability to be used as heterogeneous catalyst for the photo-Fenton decolorization of azo dye Orange II. UV irradiation was found to enhance the activity of the catalyst in the heterogeneous photo-Fenton process. Catalyst loading of 0.5g/L and hydrogen peroxide concentration of 13.5mM yielded a remarkable color removal, accompanied by excellent catalyst stability. The decolorization of Orange II followed the pseudo-first-order kinetics for initial dye concentrations from 20 to 160mg/L. The central composite design (CCD) based on the response surface methodology (RSM) was applied to evaluate the effects of several operating parameters, namely initial pH, catalyst loading and hydrogen peroxide concentration, on the decolorization efficiency. The RSM model was derived and the response surface plots were developed based on the results. Moreover, the main intermediate products were separated and identified using gas chromatography-mass spectrometry (GC-MS) and a possible degradation pathway was proposed accordingly. The acute toxicity experiments illustrated that the Daphniamagna immobilization rate continuously decreased during 150min reaction, indicating that the effluent was suitable for sequential biological treatment.

Sonoelectrocatalytic decomposition of methylene blue using Ti/Ta₂O₅-SnO₂ electrodes

Sonoelectrochemical decomposition of organic compounds is a developing technique among advanced oxidation processes (AOPs). It has the advantage over sonication alone that it increases the efficiency of the process in terms of a more rapid decrease in chemical oxygen demand (COD) and in total organic carbon (TOC) and accelerates electrochemical oxidation which normally requires a lengthy period of time to achieve significant mineralisation. Moreover the use of an electrocatalytic electrode in the process further accelerates the oxidation reaction rates. The aim of this study was to improve the decomposition efficiency of methylene blue (MB) dye by sonoelectrochemical decomposition using environmentally friendly and cost-effective Ti/Ta₂O₅-SnO₂ electrodes. Decolourisation was used to assess the initial stages of decomposition and COD together with TOC was used as a measure of total degradation. The effect of a range of sonication frequencies 20, 40, 380, 850, 1000 and 1176 kHz at different powers on the decolourisation efficiency of MB is reported. Frequencies of 850 and 380 kHz and the use of higher powers were found more effective towards dye decolourisation. The time for complete MB degradation was reduced from 180 min using electrolysis and from 90 min while carrying out sonolysis to 45 min when conducting a combined sonoelectrocatalytic experiments. The COD reduction of 85.4% was achieved after 2 h of combined sonication and electrolysis which is a slightly higher than after a single electrolysis (78.9%) and twice that of sonolysis (40.4%). A dramatic improvement of mineralisation values were observed within 2h of sonoelectrocatalytic MB degradation. The TOC removal efficiency increased by a factor of 10.7 comparing to sonication alone and by a factor of 1.5 comparing to the electrolytic process. The energy consumption (kWh/m(3)) required for the complete degradation of MB was evaluated.

A review on textile sonoprocessing: a special focus on sonosynthesis of nanomaterials on textile substrates

The chemical and physical effects of ultrasound with a frequency above 16kHz, higher than the audible frequency of the human ear, have proven to be a useful tool for variety of systems ranging from the application of ultrasound in environmental remediation to the cooperation of ultrasound waves with chemical processing regarding as sonochemistry. Ultrasound opened up new advances in textile wet processing including desizing, scouring, bleaching, dyeing, printing and finishing and also nanoprocessing including nanopretreatment, nanodyeing, nanoprinting and nanofinishing. Use of ultrasound appears to be a promising alternative technique to reduce energy, chemicals and time involved in various operations. Over the past years there has been an enormous effort on using sonochemistry for the synthesis of nanomaterials on various textile materials. In situ sonosynthesis of nanoparticles and nanocomposites on different textiles is a pioneering approach driving future investigations. With such wide range of applications and vast ever increasing publications, the objective of this paper is presenting a comprehensive review on ultrasound application in textile from early time to now by the main emphasis on the sonosynthesis of nanomaterials outlining directions toward future research.

Solar energy for wastewater treatment: review of international technologies and their applicability in Brazil

Several studies have reported the adverse effects of recalcitrant compounds and emerging contaminants present in industrial effluents, which are not degradable by ordinary biological treatment. Many of these compounds are likely to accumulate in living organisms through the lipid layer. At concentrations above the limits of biological tolerance, these compounds can be harmful to the ecosystem and may even reach humans through food chain biomagnification. In this regard, advanced oxidation processes (AOPs) represent an effective alternative for the removal of the pollutants. This study focused on the AOP involving the use of ultraviolet radiation in homogeneous and heterogeneous systems. Based on the literature review, comparisons between natural and artificial light were established, approaching photoreactors constructive and operational characteristics. We concluded that the high availability of solar power in Brazil would make the implementation of the AOP using natural solar radiation for the decontamination of effluents feasible, thereby contributing to clean production and biodiversity conservation. This will serve as an important tool for the enforcement of environmental responsibility among public and private institutions.

Biosorption of Congo Red from aqueous solution by Bacillus weihenstephanensis RI12; effect of SPB1 biosurfactant addition on biodecolorization potency

Bacillus weihenstephanensis RI12, isolated from hydrocarbon contaminated soil, was assessed for Congo Red bio-treatment potency. Results suggested the potential of this bacterium for use in effective treatment of Congo Red contaminated wastewaters under shaking conditions at acidic and neutral pH value. The strain could tolerate higher doses of dyes as it could decolorize up to 1,000 mg/l of Congo Red. When used as microbial surfactant to enhance Congo Red biodecolorization, Bacillus subtilis SPB1-derived lipopeptide accelerated the decolorization rate and maximized the decolorization efficiency at an optimal concentration of biosurfactant of about 0.075%. Studies ensured that Congo Red removal by this strain could be due to an adsorption phenomena. Germination potencies of tomato seeds using the treated dyes under different conditions showed the efficient biotreatment of the azo dye Congo Red especially with the addition of SPB1 biosurfactant. To conclude, the addition of SPB1 bioemulsifier reduced energy costs by reducing the effective decolorization period; the biosurfactant stimulated bacterial decolorization method may provide a highly efficient, inexpensive and time-saving procedure in the treatment of textile effluents.

Advanced oxidation of Reactive Blue 181 solution: a comparison between Fenton and Sono-Fenton process

In this work, the decolorization of C.I. Reactive Blue 181 (RB181), an anthraquinone dye, by Ultrasound and Fe(2+) H2O2 processes was investigated. The effects of operating parameters, such as Fe(2+) dosage, H2O2 dosage, pH value, reaction time and temperature were examined. Process optimisation [pH, ferrous ion (Fe(2+)), hydrogen peroxide (H2O2), and reaction time], kinetic studies and their comparison were carried out for both of the processes. The Sono-Fenton process was performed by indirect sonication in an ultrasonic water bath, which was operated at a fixed 35-kHz frequency. The optimum conditions were determined as [Fe(2+)]=30 mg/L, [H2O2]=50 mg/L and pH=3 for the Fenton process and [Fe(2+)]=10 mg/L, [H2O2]=40 mg/L and pH=3 for the Sono-Fenton process. The colour removals were 88% and 93.5% by the Fenton and Sono-Fenton processes, respectively. The highest decolorization was achieved by the Sono-Fenton process because of the production of some oxidising agents as a result of sonication. The paper also discussed kinetic parameters. The decolorization kinetic of RB181 followed pseudo-second-order reaction (Fenton study) and Behnajady kinetics (Sono-Fenton study).