Decolorization of azo dye Orange G by aluminum powder enhanced by ultrasonic irradiation

TiO2-Decorated by Nano-γ-Fe2O3 as a Catalyst for Efficient Photocatalytic Degradation of Orange G Dye under Eco-friendly White LED Irradiation

Azo dyes make up a major class of dyes that have been widely studied for their diverse applications. In this study, we successfully applied nano-γ-Fe2O3/TiO2 as a nanocatalyst to improve the photodegradation efficiency of azo dyes (Orange G (OG) dye as a model) from aqueous solution under white light-emitting diode (LED) irradiation. We also investigated the degradation mechanisms and pathways of OG dye as well as the effects of the initial pH value, amount of H2O2, catalyst dosage, and dye concentration on the degradation processes. The characterizations of nano-γ-Fe2O3 and γ-Fe2O3 Nps/TiO2 were carried out using various techniques, including X-ray diffractometry, scanning electron microscopy, energy-dispersive X-ray spectroscopy, Fourier transform infrared spectroscopy, and UV-visible spectroscopy. The efficiency of the photodegradation reaction of OG was found to follow pseudo-first-order kinetics (Langmuir-Hinshelwood model) with a rate constant of 0.0338 min-1 and an R2 of 0.9906. Scavenger experiments revealed that hydroxyl radicals and superoxide anion radicals were the dominant species in the OG photocatalytic oxidation mechanism. This work provides a new method for designing highly efficient heterostructure-based photocatalysts (γ-Fe2O3 Nps/TiO2) based on LED light irradiation for environmental applications.

Removal of orange G dye by Aspergillus niger and its effect on organic acid production

Azo dyes have been found in wastewater from textile industries. These compounds continuously persist in the environment for long periods of time and may be toxic for living beings. An alternative treatment for dye removal that has proven to be effective is aerobic treatment with fungi. In this study, Aspergillus niger was investigated as a mechanism to remove orange G (OG). Removal of 200 mg/L of OG by A. niger biomass was carried out in solid and liquid medium, which showed a positive correlation between A. niger growth and dye removal. In liquid media what was proved is that the efficiency of OG removal by A. niger depends on its concentration; at 200 mg/L of OG remove by degradation and at 400 mg/L by processes as sorption and degradation. During OG removal, the generation of organic acids by A. niger was modified compared to constitutive generation, one of the modifications was the increase of gluconic acid production and the decrease of acids involved in the Krebs cycle, as well as the null detection of oxalic acid. The monitoring of organic acids by high-performance liquid chromatography (HPLC) was important because some of them have been linked to dye removal.

Nitrate Removal by Zero-Valent Metals: A Comprehensive Review

Nitrate is a widespread water contaminant that can pose environmental and health risks. Various conventional techniques can be applied for the removal of nitrate from water and wastewater, such as biological denitrification, ion exchange, nanofiltration, and reverse osmosis. Compared to traditional methods, the chemical denitrification through zero-valent metals offers various advantages, such as lower costs, simplicity of management, and high efficiencies. The most utilized material for chemical denitrification is zero-valent iron (ZVI). Aluminium (ZVA), magnesium (ZVM), copper (ZVC), and zinc (ZVZ) are alternative zero-valent metals that are studied for the removal of nitrate from water as well as from aqueous solutions. To the best of our knowledge, a comprehensive work on the use of the various zero-valent materials that are employed for the removal of nitrate is still missing. Therefore, in the present review, the most recent papers concerning the use of zero-valent materials for chemical denitrification were analysed. The studies that dealt with zero-valent iron were discussed by considering microscopic (mZVI) and nanoscopic (nZVI) forms. For each Fe0 form, the effects of the initial pH, the presence or absence of dissolved oxygen, the initial nitrate concentration, the temperature, and the dissolved ions on the nitrate removal process were separately evaluated. Finally, the different materials that were employed as support for the nanoparticles were examined. For the other zero-valent metals tested, a detailed description of the works present in the literature was carried out. A comparison of the various features that are related to each considered material was also made.

Sono-degradation of Reactive Blue 19 in aqueous solution and synthetic textile industry wastewater by nanoscale zero-valent aluminum

Reactive dyes, which are commonly used in the textile industry, are toxic and carcinogenic for the ecosystem and human health. The objective of this study was to investigate the removal of Reactive Blue 19 (RB19) from aqueous solution and synthetic textile industry wastewater using nanoscale zero-valent aluminum (nZVAl), ultrasonic bath (US-40 kHz), and combined US/nZVAl through the consideration of varying experimental parameters such as pH, nZVAl dosage, contact time, and initial RB19 dye concentration. The acidic pH value was an effective parameter to degrade RB19. As the nZVAl dosage and contact time increased, the degradation of RB19 dye from aqueous solution and synthetic textile industry wastewater increased using combined US/nZVAl process. A similar result was obtained for RB19 removal with combined US/nZVAl using 0.10 g dosage at 30 min, whereas it was obtained with nZVAl alone using 0.20 g dosage at 60 min. The sono-degradation process activated the nZVAl surface depending on US cavitation effect and shock waves, and increased RB19 dye uptake capacity with a shorter contact time and lower nZVAl dosage. Increasing the initial dye concentration decreased the removal efficiency for RB19. According to the obtained reusability results, nZVAl particles could be reused for four and two consecutive cycles of combined US/nZVAl and nZVAl alone, respectively.

Application of hybrid oxidative processes based on cavitation for the treatment of commercial dye industry effluents

The present work demonstrates the significant role of ultrasound (US) in intensifying the efficacy of the combination with Fenton reagent and/or ozone for the treatment of real dye industry industrial effluent procured from the local industry. Initial part of the work focused on analysing the literature based on combination approaches of US with different oxidants applied for the treatment of real and simulated effluents focusing on the dyes. The work also provides guidelines for the selection of optimal operating parameters for maximizing the intensification of the degradation. The second part of the work presents an experimental study into combined approaches of ultrasound with ozone (O3) and Fenton's reagent for treatment of real effluent. Under optimized conditions (100 W, 20 kHz and duty cycle of 70%), maximum COD reductions of 94.79% and 51% were observed using a combined approach of US + Fenton oxidation followed by lime treatment for the treatment of effluent-I and effluent-II respectively at H2O2 loading of 17.5 g/L, H2O2/Fe2+ ratio of 3, pH of 4, CaO dose of 1 g/L and an overall treatment time of 70 min. US + Fenton + O3 followed by lime was also applied for treatment under ozone loading of 1 g/h for the treatment of effluent-I and it was found that maximum COD reduction of 95.12% was obtained within 30 min of treatment time, indicating use of ozone did not result in significant value addition in terms of COD reduction but resulted in faster treatment. HC (inlet pressure: 4 bar) + Fenton + Lime scheme was successfully replicated on a pilot-scale resulting in maximum COD reduction of 57.65% within 70 min of treatment time. Overall, it has been concluded that the hybrid oxidative processes as US + Fenton followed by lime treatment is established as the best approach ensuring effective COD reduction at the same time obtaining final colourless/reusable effluent.

Ultrafast and high efficiency photodegradation of dyes under visible light by Au nanocluster-promoted Zn0.5Cd0.5S nanorods

Au nanoclusters decorated on the lateral surface of ultrathin ZCS nanorods could maximize the photocatalytic activity of ZCS by PRET mechanism. This makes it possible to use less photocatalysts to degrade more recalcitrant dyes in a short time.

Sustainable Internal Electric Field for Enhanced Photocatalysis: From Material Design to Energy Utilization

The intrinsic internal electric field in a ferroelectric photocatalyst is beneficial for improving the photocatalytic properties because of its positive effect on the separation and migration of photogenerated carriers. However, this kind of internal electric field is static and easily saturated by inner and outer shielding effects, seriously restricting its potential in photocatalysis. To overcome this problem, a sustainable internal electric field was introduced into photocatalysis based on piezoelectric and pyroelectric effect, which exhibits good capability in consistently boosting photocatalytic activity, thus becoming a hot research topic. In this Perspective we summarize the recent significant progress in the construction of sustainable internal electric fields for facilitating photocatalysis from material design to energy utilization. Moreover, the fascinating influence of sustainable internal electric fields on carrier behavior is also discussed. Finally, a summary and outlook for building a sustainable internal electric field to further enhance photocatalytic performance are provided.

Ultrasound assisted synthesis of WO3-ZnO nanocomposites for brilliant blue dye degradation

The present work deals with the preparation of WO₃ and WO₃-ZnO nanocomposites in presence of ultrasonic irradiation, and its use in the sonocatalytic degradation of brilliant blue dye. WO₃-ZnO nanocomposite is prepared using one step in-situ ultrasound assisted method. The successfully prepared WO₃ and WO₃-ZnO nanocomposites were characterized using different characterization techniques such as XRD, Raman, BET, FE-SEM and EDS. The XRD pattern reveals that the formation of monoclinic and hexagonal crystal structures of WO₃ and ZnO respectively. BET study shows that WO₃-ZnO nanocomposite have maximum surface area than that of the WO₃. EDS study confirms the formation of WO₃-ZnO nanocomposites. Further the use of the prepared WO₃ and WO₃-ZnO nanocomposites as a sonocatalyst for the degradation of brilliant blue dye. The rate constant (k) was evaluated as a function of the initial concentration of brilliant blue dye. It is found that WO₃-ZnO nanocomposites exhibits maximum sonocatalytic activity as compared to WO₃ photocatalyst.

Review of zero-valent aluminium based water and wastewater treatment methods

Zero-valent metals (ZVM) are widely used to remove heavy metals, contaminants, toxicity, etc. from water and wastewater. Zero-valent aluminium (ZVAl) has large surface area and high surface reactivity. It has enormous flexibility for the in-situ application. ZVAl can be applied as either a single or a bimetallic system as well as advanced oxidation processes (AOPs). It is observed that ZVAl is capable of generating hydroxyl and sulfate radicals in water medium, which remove non-biodegradable pollutants from aqueous solution. ZVAl-based processes can remove non-biodegradable organic contaminants from water medium within a short duration. ZVAl is also used as a reducing agent. It is efficient to reduce toxic hexavalent chromium to less toxic trivalent chromium. ZVAl, in various combinations in bimetallic system (Fe/Al, Pd/Al, Cu/Al), is able to remove various contaminants from aqueous medium. Overall, it can be concluded that ZVAl-based methods for water and wastewater treatment are promising environmental technologies.

Aqueous norfloxacin sonocatalytic degradation with multilayer flower-like ZnO in the presence of peroxydisulfate

Multilayer ZnO nanoflowers were synthesized through a simple precipitation method and characterized by field-emission scanning electron microscopy (FE-SEM), X-ray diffraction (XRD), X-ray photoelectron spectra (XPS) and nitrogen absorption-desorption techniques. The FE-SEM images show the integrated morphology of an individual flower-like ZnO nanostructure, which is made of nano-platelets with uniform thickness (20-30nm). The average pore size and Brunauer-Emmet-Teller (BET) surface area of the as-synthesized ZnO were 27.25nm and 13.53m²/g. The sonocatalytic ability of the prepared samples was evaluated through norfloxacin (NF) degradation in an aqueous system using ultrasound (US) irradiation. To improve degradation efficiency, peroxydisulfate (Na₂S₂O₈) was introduced to develop a US/ZnO/peroxydisulfate system, which exhibited an excellent synergistic effect. The effects of ZnO dosage, Na₂S₂O₈ concentration, pH, and initial NF concentration were studied to determine the performances of the US/ZnO/peroxydisulfate process. Corresponding results showed that NF degradation rate increased with the increase of ZnO dosage but decreased with the increase of initial NF concentration. Under the optimal Na₂S₂O₈ concentration of 0.1gL^-1 at pH 9, the best degradation efficiency can be achieved. Moreover, based on the scavenging experiment results and literatures, NF degradation through US/ZnO/peroxydisulfate system is majorly induced by OH and SO₄^- radicals.

Sonochemical degradation of methyl orange in the presence of Bi2WO6: Effect of operating parameters and the generated reactive oxygen species

The Bi2WO6 was prepared by the hydrothermal method and its sonocatalytic activity was studied in the degradation of methyl orange (MO) solutions. The effects of catalytic activity of Bi2WO6 on dye were inspected by the change in absorbance of dye with UV-vis spectrometer. The influences of operational parameters such as the addition amount of Bi2WO6, pH, the initial concentration of dyes, ultrasonic power and irradiation time on the degradation ratio were investigated. In addition, the obtained results indicated that the kinetics of sonochemical reactions of MO were consistent with the pseudo first-order kinetics and Bi2WO6 had excellent reusability and stability during the sonochemical degradation processes. The generation and kinds of reactive oxygen species (ROS) and their influence on the sonochemical degradation of MO were determined by the methods of oxidation-extraction spectrophotometry and ROS scavengers. The results indicate that the degradation of MO in the presence of Bi2WO6 under ultrasonic irradiation is related to the generation of ROS, in which both singlet molecular oxygen ((1)O2) and hydroxyl radical (OH) play important roles in the sonochemical degradation of MO. These experimental results provide a sound foundation for the further development of Bi2WO6 as a sonocatalyst in wastewater treatment.

Synthesis of Fe-doped Bi2O3 nanocatalyst and its sonophotocatalytic activity on synthetic dye and real textile wastewater

The catalysts such as Fe, Bi₂O₃, and Fe-doped Bi₂O₃ were synthesized for the sonophotocatalytic treatment of synthetic dye and real textile wastewater. The resultant catalysts were characterized for its size and uniform shape using x-ray diffractogram (XRD) and scanning electron microscopy (SEM) which signified the nanorod shape formed Bi₂O₃. The higher ultraviolet light absorbance capacity of the catalysts was also evident using diffuse reflectance spectroscopy (DRS). Initially, the effect of conventional parameters such as initial pH, gas bubbling (argon, oxygen, air and nitrogen) and oxidant addition (H₂O₂ and peroxymonosulfate) in the presence of sonolysis (22 and 37 kHz frequency) and photolysis (UV-C light) on 10 ppm Basic Brown 1 dye was studied. The results showed that highest decolorization of 62 % was attained for 3 g/L peroxymonosulfate under 37 kHz frequency sonolysis treatment. Secondly, with the catalyst study, highest of 46 % dye color removal was obtained with 4 g/L Fe under 37 kHz frequency sonolysis treatment. The sonophotocatalytic treatment of dye with Fe-doped Bi₂O₃ catalyst in combination with peroxymonosulfate showed highest color removal of 99 %. Finally, the sonophotocatalytic treatment of real textile wastewater in the presence of 3 g/L Fe-doped Bi₂O₃ and 6 g/L peroxymonosulfate reduced the total organic carbon (TOC) and chemical oxygen demand (COD) level to 77 and 91 %, respectively, in 180 min. The reported treatment process was found to treat the synthetic dye and real textile wastewater effectively.

Removal of C.I. Reactive Red 2 by low pressure UV/chlorine advanced oxidation

Azo dyes are commonly found as pollutants in wastewater from the textile industry, and can cause environmental problems because of their color and toxicity. The removal of a typical azo dye named C.I. Reactive Red 2 (RR2) during low pressure ultraviolet (UV)/chlorine oxidation was investigated in this study. UV irradiation at 254nm and addition of free chlorine provided much higher removal rates of RR2 and color than UV irradiation or chlorination alone. Increasing the free chlorine dose enhanced the removal efficiency of RR2 and color by UV/chlorine oxidation. Experiments performed with nitrobenzene (NB) or benzoic acid (BA) as scavengers showed that radicals (especially OH) formed during UV/chlorine oxidation are important in the RR2 removal. Addition of HCO3(-) and Cl(-) to the RR2 solution did not inhibit the removal of RR2 during UV/chlorine oxidation.

Ultrasonically induced ZnO-biosilica nanocomposite for degradation of a textile dye in aqueous phase

In the present study, a porous clay-like support with unique characteristics was used for the synthesis and immobilization of ZnO nanostructures to be used as sonocatalyst for the sonocatalytic decolorization of methylene blue (MB) dye in the aqueous phase. As a result, the sonocatalytic activity of ZnO-biosilica nanocomposite (77.8%) was higher than that of pure ZnO nanostructures (53.6%). Increasing the initial pH from 3 to 10 led to increasing the color removal from 41.8% to 88.2%, respectively. Increasing the sonocatalyst dosage from 0.5 to 2.5 g/L resulted in increasing the color removal, while further increase up to 3g/L caused an obvious drop in the color removal. The sonocatalysis of MB dye over ZnO-biosilica nanocomposite was temperature-dependent. The presence of methanol produced the most adverse effect on the sonocatalysis of MB dye. The addition of chloride and carbonate ions had a negligible effect on the sonocatalysis, while the addition of persulfate ion led to increasing the color removal from 77.8% to 99.4% during 90 min. The reusability test exhibited a 15% drop in the color removal (%) within three consecutive experimental runs. A mineralization efficiency of 63.2% was obtained within 4h.

Selective removal of anionic dyes using poly(N,N-dimethyl amino ethylmethacrylate) functionalized graphene oxide

An in situ polymerization strategy was used to functionalize graphene oxide (GO) with poly(N,N-dimethyl amino ethylmethacrylate) (PDMAEMA) for the selective removal of anionic dyes.

MnO2/CeO2 for catalytic ultrasonic decolorization of methyl orange: Process parameters and mechanisms

MnO2/CeO2 catalyst was prepared and characterized by means of Brunauer-Emmet-Teller (BET) method, X-ray diffraction (XRD) and scanning electron microscope (SEM). The characterization showed that MnO2/CeO2 had big specific surface area and MnO2 was dispersed homogeneously on the surface of CeO2. Excellent degradation efficiency of methyl orange was achieved by MnO2/CeO2 catalytic ultrasonic process. Operating parameters were studied and optimized. The optimal conditions were 10 min of ultrasonic irradiation, 1.0 g/L of catalyst dose, 2.6 of pH value and 1.3 W/ml of ultrasonic density. Under the optimal conditions, nearly 90% of methyl orange was removed. The mechanism of methyl orange degradation was further studied. The decolorization mechanism in the ultrasound-MnO2/CeO2 system was quite different with that in the ultrasound-MnO2 system. Effects of manganese and cerium in catalytic ultrasonic process were clarified. Manganese ions in solution contributed to generating hydroxyl free radical. MnO2/CeO2 catalyst strengthened the oxidation ability of ultrasound and realized complete decolorization of methyl orange.

Degradation of the azo dye Orange G in a fluidized bed reactor using iron oxide as a heterogeneous photo-Fenton catalyst

Waste iron oxide could activate H₂O₂efficiently under UVA irradiation to degrade Orange G in a novel fluidized bed reactor.