Ultrasonic/sonochemical synthesis and evaluation of nanostructured oil in water emulsions for topical delivery of protein drugs

Ultrasound triggered process optimization of Etlingera linguiformis (Roxb.) R.M.Sm. nanoemulsion: Its stability, cytotoxicity and antibacterial activity

Periodontal infections and dental caries are leading causes of tooth loss, impacting overall health and quality of life. Conventional treatments involve antibiotics, antiamoebic drugs, and quaternary ammonium compounds, their prolonged use can cause resistance and toxicity. In this study, E. linguiformis essential oil (ELEO) was evaluated for chemical composition, and its nanoemulsion (ELEON) with good stability was characterized for ELEON properties, prepared using ultrasonication, and assessed for their antibacterial efficacy. The results showed that ELEO is dominated by estragole as the major compound, with the 60-minute sonicated sample exhibiting the best stability and uniform droplet size (220.03 d.nm) distribution. Prolonged ultrasonication led to an increase in particle size, highlighting the importance of optimal processing. Antibacterial analysis revealed that ELEON exhibited higher activity than ELEO against S. mutans and S. aureus, attributed to its smaller droplet size and enhanced penetration into microbial cells. Transmission Electron Microscope (TEM) showed the droplet diameter comparable to the particle size measured in Dynamic light scattering (DLS). Scanning Electron Microscopy (SEM) revealed significant morphological changes and membrane disruption in bacteria treated with ELEO and ELEON, leading to cell death. The cytotoxicity of ELEO and ELEON from E. linguiformis rhizomes was evaluated on L929 fibroblast cell lines using the MTT assay, showing no significant reduction in cell viability across tested concentrations. ELEON enhances essential oil stability and antimicrobial efficacy, demonstrating thepotential for pharmaceutical applications and antibiotic resistance management.

Research on optimizing focused ultrasonic parameters for Surfactant-Free nanoemulsion with prolonged stability

Stable-state emulsions with no phase separation and dispersed-particle aggregation can be utilized in various fields, such as cosmetics, pharmaceuticals, food, and drug delivery. However, the physicochemical properties and stability of emulsions are significantly affected by factors such as concentration, mixing method, droplet size, and temperature. Surfactants (emulsifiers), which are used to form stable emulsions, adversely affect the human body and environment and influence the properties of emulsions, thereby limiting their development. This study manufactured stable emulsions without a surfactant using ultrasonic equipment. The oil particle size distributions, zeta potentials, microscopic observations, and emulsion stabilities of six emulsions (with an oil content of 1 %) prepared using different frequencies (250-1000 kHz) and output powers (50-150 W) were analyzed, immediately after preparation at 25 °C and 3 d thereafter. Finally, it was possible to manufacture a stable emulsion without particle size change or phase separation with a particle size in the 100 nm range and a surface charge value of -40 mV or more under conditions of 400 kHz and 150 W. This study proposed a method (with the optimum conditions) for manufacturing surfactant-free emulsions by analyzing the stability of emulsions manufactured under various frequencies and output-power conditions. The proposed method could open new frontiers in emulsion development and applications.

The Evolution of Sonochemistry: From the Beginnings to Novel Applications

Sonochemistry is the use of ultrasonic waves in an aqueous medium, to generate acoustic cavitation. In this context, sonochemistry emerged as a focal point over the past few decades, starting as a manageable process such as a cleaning technique. Now, it is found in a wide range of applications across various chemical, physical, and biological processes, creating opportunities for analysis between these processes. Sonochemistry is a powerful and eco-friendly technique often called "green chemistry" for less energy use, toxic reagents, and residues generation. It is increasing the number of applications achieved through the ultrasonic irradiation (USI) method. Sonochemistry has been established as a sustainable and cost-effective alternative compared to traditional industrial methods. It promotes scientific and social well-being, offering non-destructive advantages, including rapid processes, improved process efficiency, enhanced product quality, and, in some cases, the retention of key product characteristics. This versatile technology has significantly contributed to the food industry, materials technology, environmental remediation, and biological research. This review is created with enthusiasm and focus on shedding light on the manifold applications of sonochemistry. It delves into this technique's evolution and current applications in cleaning, environmental remediation, microfluidic, biological, and medical fields. The purpose is to show the physicochemical effects and characteristics of acoustic cavitation in different processes across various fields and to demonstrate the extending application reach of sonochemistry. Also to provide insights into the prospects of this versatile technique and demonstrating that sonochemistry is an adapting system able to generate more efficient products or processes.

Emulsion Technology in Nuclear Medicine: Targeted Radionuclide Therapies, Radiosensitizers, and Imaging Agents

Radiopharmaceuticals serve as a major part of nuclear medicine contributing to both diagnosis and treatment of several diseases, especially cancers. Currently, most radiopharmaceuticals are based on small molecules with targeting ability. However, some concerns over their stability or non-specific interactions leading to off-target localization are among the major challenges that need to be overcome. Emulsion technology has great potential for the fabrication of carrier systems for radiopharmaceuticals. It can be used to create particles with different compositions, structures, sizes, and surface characteristics from a wide range of generally recognized as safe (GRAS) materials, which allows their functionality to be tuned for specific applications. In particular, it is possible to carry out surface modifications to introduce targeting and stealth properties, as well as to control the particle dimensions to manipulate diffusion and penetration properties. Moreover, emulsion preparation methods are usually simple, economic, robust, and scalable, which makes them suitable for medical applications. In this review, we highlight the potential of emulsion technology in nuclear medicine for developing targeted radionuclide therapies, for use as radiosensitizers, and for application in radiotracer delivery in gamma imaging techniques.

Fabrication, characterization, and interventions of protein, polysaccharide and lipid-based nanoemulsions in food and nutraceutical delivery applications: A review

The fabrication and application of nanoemulsions for incorporating and delivering diverse bioactive compounds, particularly hydrophobic substances, is becoming an increasing focus of research with the potential to improve the nutritional and health status of individuals. Constant advancements in nanotechnological approaches aid in the creation of nanoemulsions using diverse biopolymers such as proteins, peptides, polysaccharides, and lipids to improve the stability, bioactivity, and bioavailability of active hydrophilic and lipophilic compounds. This article provides a comprehensive overview of various techniques used to create and characterize nanoemulsions as well as theories for understanding their stability. The article also highlights the advancement of nanoemulsions in boosting the bioaccessibility of nutraceuticals to help advance their potential use in various food and pharmaceutical formulations.

Recent Advances in Improving the Bioavailability of Hydrophobic/Lipophilic Drugs and Their Delivery via Self-Emulsifying Formulations

Formulations based on emulsions for enhancing hydrophobic and lipophilic drug delivery and its bioavailability have attracted a lot of interest. As potential therapeutic agents, they are integrated with inert oils, emulsions, surfactant solubility, liposomes, etc.; drug delivering systems that use emulsion formations have emerged as a unique and commercially achievable accession to override the issue of less oral bioavailability in connection with hydrophobic and lipophilic drugs. As an ideal isotropic oil mixture of surfactants and co-solvents, it self-emulsifies and forms fine oil in water emulsions when acquainted with aqueous material. As droplets rapidly pass through the stomach, fine oil promotes the vast spread of the drug all over the GI (gastrointestinal tract) and conquers the slow disintegration commonly seen in solid drug forms. The current status of advancement in technologies for drug carrying has promulgated the expansion of innovative drug carriers for the controlled release of self-emulsifying pellets, tablets, capsules, microspheres, etc., which got a boost for drug delivery usage with self-emulsification. The present review article includes various kinds of formulations based on the size of particles and excipients utilized in emulsion formation for drug delivery mechanisms and the increase in the bioavailability of lipophilic/hydrophobic drugs in the present time.

Sonochemistry: An emerging approach to fabricate biopolymer cross-linked emulsions for the delivery of bioactive compounds

Sonochemistry shows remarkable potential in the synthesis or modification of new micro/nanomaterials, particularly the cross-linked emulsions for drug delivery. However, the trend of utilizing sonochemical emulsions for delivery of food-derived bioactive compounds has been just started. The extension of sonochemistry as a tool for engineering bioactive delivery systems will make the approach more universal and greatly increase its applications in the food industry. This review summarizes different types of biopolymeric cross-linked emulsions (CLEs) synthesized via sonochemical approach, including CLEs, surface-modified CLEs, cross-linked high internal phase emulsions, and some novel systems templated on CLEs. Special emphasis is directed toward the cross-linking mechanisms of biopolymers at the oil-water interfaces under acoustic cavitation and the physicochemical principles underlying sonochemical fabrication. We also highlight the advantages and challenges associated with the delivery performance of each system for bioactive compounds. The potential in delivering bioactives using sonochemical emulsions has not been fully reached. There are still a number of issues that need to be overcome, including low cross-linking degree of biopolymers, degradation of bioactives in sonochemical process, and unclear biological fate of encapsulated bioactive compounds. This review may guide future trends in exploring efficient sonochemical strategies and multifunctional delivery systems for food applications.

Ultrasound-assisted fabrication of biopolymer materials: A review

There is an urgent need to develop technologies that can physically manipulate the structure of biocompatible and green polymer materials in order to tune their performance in an efficient, repeatable, easy-to-operate, chemical-free, non-contact, and highly controllable manner. Ultrasound technology produces a cavitation effect that promotes the generation of free radicals, the fracture of chemical chain segments and a rapid change of morphology. The cavitation effects are accompanied by thermal, chemical, and biological effects that interact with the material being studied. With its high efficiency, cleanliness, and reusability applications, ultrasound has a vast range of opportunity within the field of natural polymer-based materials. This work expounds the basic principle of ultrasonic cavitation and analyzes the influence that ultrasonic strength, temperature, frequency and induced liquid surface tension on the physical and chemical properties of biopolymer materials. The mechanism and the influence that ultrasonic modification has on materials is discussed, with highlighted details on the agglomeration, degradation, morphology, structure, and the mechanical properties of these novel materials from naturally derived polymers.

Development of a Novel Methotrexate-Loaded Nanoemulsion for Rheumatoid Arthritis Treatment with Site-Specific Targeting Subcutaneous Delivery

Rheumatoid arthritis (RA) is a systemic, chronic autoimmune disease that causes disability due to progressive inflammation and destruction of the tissues around the joints. Methotrexate is mainly used to prevent the progression of joint destruction and reduce the deformity. The major challenge in treating RA with methotrexate is the systemic side effects that limit dose escalation. Hence, a novel formulation of a methotrexate-loaded nanoemulsion for subcutaneous administration was developed that aims to deliver methotrexate into the system via the lymph. The methotrexate-loaded nanoemulsion was prepared by using the aqueous-titration method. The prepared nanoemulsion was investigated for particle size, surface charge, surface morphology, entrapment efficiency, DSC (differential scanning colorimetry), drug release, hemocompatibility assay, and cytotoxicity, as well as anti-arthritic and stability studies. The vesicle size, zeta potential, PDI (polydispersity index), and entrapment efficiency of the optimized nanoemulsion were 87.89 ± 2.86 nm, 35.9 ± 0.73 mV, 0.27, and 87 ± 0.25%, respectively. The DSC study showed that the crystalline methotrexate was converted to an amorphous form and the drug was fully incorporated into the vesicles. After 72 h, the optimized nanoemulsion showed a drug release of 96.77 ± 0.63%, indicating a sustained-release dosage form. Cytocompatibility testing by MTT (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide) assay on macrophage cell lines showed that the nanoemulsion was non-toxic. The formulation showed significant anti-arthritic activity compared to the marketed drug solution. In addition, the nanoemulsion containing methotrexate remained stable for three months when stored at a low temperature. Since the nanoemulsion containing methotrexate has excellent physicochemical properties and lowers systemic side effects by targeted delivery, it is a desirable technology for subcutaneous drug delivery.

The Emerging Role of Ultrasonic Nanotechnology for Diagnosing and Treatment of Diseases

Nanotechnology has been commonly used in a variety of applications in recent years. Nanomedicine has also gotten a lot of attention in the medical and treatment fields. Ultrasonic technology is already being used in research as a powerful tool for manufacturing nonmaterial and in the decoration of catalyst supports for energy applications and material processing. For the development of nanoparticles and the decoration of catalytic assisted powders with nanoparticles, low or high-frequency Ultrasonic are used. The Ultrasonic is frequently used in joint venture with the nanotechnology from the past few years and bring tremendous success in various diseases diagnosing and treatment. Numerous kinds of nanoparticles are fabricated with desired capabilities and targeted toward different targets. This review first highlights the Ultrasonic Treatment and processing of Nanoparticles for Pharmaceuticals. Next, we explain various nanoparticles with ultrasonic technology for different diagnosing and treatment of various diseases. Finally, we explain the challenges face by current approaches for their translation in clinics.

Anti-rheumatic activity of topical nanoemulsion containing bee venom in rats

PURPOSE

Bee Venom (BV) has been used to treat rheumatoid arthritis (RA) for many centuries. However, its clinical use is limited by pain and fear of bee stings/injection. Nanoemulsions (NEs) are nanocarriers that are able to help their content(s) penetrate through the skin. They also act as drug reservoirs on the skin to provide an efficient, sustained-release vehicle.

METHODS

In this paper, we present the development of a stable water-in-oil NE to help passing BV through the animal skin when used topically.

RESULTS

Particle size of NE was 12.7 to 29.8 nm for NEs containing 0 to 150 µg/ml BV. Also, its anti-inflammatory effects were evaluated in rat models of type II collagen-induced arthritis. Topical administration of NEs containing 18.75 or 9.37 μg/ml BV were able to significantly (p<0.05) reduce inflammation in the rat paws compared to the blank and control groups.

CONCLUSION

Our findings demonstrated the efficacy of NEs containing BV to reduce inflammation caused by RA animal model.

Production and characterization of nanoemulsion with low-calorie structured lipids and its potential to modulate biomarkers associated with obesity and comorbidities

Structured lipids (SL) containing behenic acid have been produced in order to obtain low-calorie lipids for foods; however, the development of a high nutritional value and a stable nanoemulsion carrier system for these SL is an interesting breakthrough for this field of research, improving technologic and biological potential for food application. In this sense, the aim of this study was to evaluate the stability of a nanoemulsion containing SL NeSL (produced with olive oil, soybean oil and fully hydrogenated crambe oil), the behavior during in vitro digestion and the effects on biomarkers involved in the obesity in cell models. The samples showed good stability throughout storage (30 days) under refrigeration and room temperature and after the gastric digestion phase compared to the controls (nanoemulsion of olive and soybean oil). After the intestinal phase, there was an increase in oil droplet size and zeta potential, a characteristic of coalescence. In the lipid accumulation model in adipocytes, the highest concentration (50 µL/mL) of NeSL resulted in 42% less lipid accumulation, compared to the control. Furthermore, the sample was able to reduce inflammatory cytokines produced by macrophages provoked by LPS (lipopolysaccharide). The combination of the oils in NeSL resulted in a fatty acid profile with beneficial health properties, which may have contributed to less lipid accumulation and improved inflammatory parameters. This SL in the form of a nanoemulsion, may be used as a partial fat substitute in low-calorie food products.

Emulsion gels stabilized by soybean protein isolate and pectin: Effects of high intensity ultrasound on the gel properties, stability and β-carotene digestive characteristics

In this study, soybean protein isolate (SPI) and pectin emulsion gels were prepared by thermal induction, and the effects of high intensity ultrasound (HIU) at various powers (0, 150, 300, 450 and 600 W) on the structure, gel properties and stability of emulsion gels were investigated. Fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) showed that the interaction between SPI and pectin was enhanced and the crystallinity of the emulsion gels was changed due to the HIU treatment. Confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM) observations revealed that the particle size of the emulsion gels was decreased significantly by HIU treatment. The emulsion gel structure became more uniform and denser, which was conducive to storage stability. In addition, according to the low field nuclear magnetic resonance (LF-NMR) analysis, HIU treatment had no obvious impact on the content of bound water as the power increased to 450 W, while the content of free water decreased gradually and became immobilized water, which indicated that the water holding capacity of the emulsion gels was enhanced. Compared with untreated emulsion gel, differential scanning calorimetry (DSC) analysis showed that the denaturation temperature reached 131.9 ℃ from 128.2 ℃ when treated at 450 W. The chemical stability and bioaccessibility of β-carotene in the emulsion gels were improved significantly after HIU treatment during simulated in vitro digestion.

Ultrasound regulated flexible protein materials: Fabrication, structure and physical-biological properties

Ultrasound can be used in the biomaterial field due to its high efficiency, easy operation, no chemical treatment, repeatability and high level of control. In this work, we demonstrated that ultrasound is able to quickly regulate protein structure at the solution assembly stage to obtain the designed properties of protein-based materials. Silk fibroin proteins dissolved in a formic acid-CaCl2 solution system were treated in an ultrasound with varying times and powers. By altering these variables, the silks physical properties and structures can be fine-tuned and the results were investigated with Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), scanning electron microscopy (SEM), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), dynamic mechanical analysis (DMA), gas permeability and water contact angle measurements. Ultrasonic treatment aids the interactions between the calcium ions and silk molecular chains which leads to increased amounts of intermolecular β-sheets and α-helix. This unique structural change caused the silk film to be highly insoluble in water while also inducing a hydrophilic swelling property. The ultrasound-regulated silk materials also showed higher thermal stability, better biocompatibility and breathability, and favorable mechanical strength and flexibility. It was also possible to tune the enzymatic degradation rate and biological response (cell growth and proliferation) of protein materials by changing ultrasound parameters. This study provides a unique physical and non-contact material processing method for the wide applications of protein-based biomaterials.

Nanoencapsulation of Hirudo medicinalis proteins in liposomes as a nanocarrier for inhibiting angiogenesis through targeting VEGFA in the Breast cancer cell line (MCF-7)

Introduction: Breast cancer is the most serious cause of women’s death throughout the world. Using nanocarrier vehicles to the exact site of cancer upgrades the therapeutic efficiency of the drugs. Capsulation of active proteins in the vesicular liposomes’ hydrophilic core is essential to develop a therapeutic protein carrier system. We aimed to encapsulate the medicinal leech saliva extract (LSE) and assess the inhibition of angiogenesis of breast cancer cells by targeting vascular endothelial growth factor A (VEGFA). Methods: In this research, enhanced formulation of liposomal protein was determined by zeta potential analysis, droplet size, drug release assay, and transmission electron microscopy (TEM). Furthermore, a cytotoxicity assay of liposomal LSE was performed to determine the cytotoxic activity of components. For assessing the expression of VEGFA, P53, and hypoxia-inducible factor subunit alpha (HIF1a) genes, Real-Time PCR was applied. Results: Nano liposome was chosen as an enhanced formulation due to its much smaller size (46.23 nm). Liposomal LSE had more practical actions on the MCF-7 cells. As noticed by DAPI staining, apoptosis was extensively greater in treated MCF-7 cells. Wound healing assay demonstrated that MCF-7 cells could not sustain growth at the presence of liposomal LSE and expression of the VEGFA gene was declined in treated cells. Downregulation of VEGFA was evaluated with western blotting technique. Conclusion: It can be concluded that our investigation of the tests confirmed the fact that nano liposomal LSE is a novel promising formulation for anticancer drugs and can significantly improve the penetration of protein drugs to cancer cells.

Oral Nanoemulsion of Fenofibrate: Formulation, Characterization, and In Vitro Drug Release Studies

Nanoemulsions (NMs) are one of the most important colloidal dispersion systems that are primarily used to improve the solubility of poorly water soluble drugs. The main objectives of this study were, first, to prepare an NM loaded with fenofibrate using a high shear homogenization technique and, second, to study the effect of variable using a central composite design. Twenty batches of fenofibrate-loaded NM formulations were prepared. The formed NMs were subjected to droplet size analysis, zeta potential, entrapment efficiency, pH, dilution, polydispersity index, transmission electron microscopy (TEM), Fourier transform infrared spectrophotometry, differential scanning calorimetry (DSC), and in vitro drug release study. Analysis of variance was used for entrapment efficiency data to study the fitness and significance of the design. The NM-7 batch formulation demonstrated maximum entrapment efficiency (81.82%) with lowest droplet size (72.28 nm), and was thus chosen as the optimized batch. TEM analysis revealed that the NM was well dispersed with droplet sizes <100 nm. Incorporation of the drug into the NM was confirmed with DSC studies. In addition, the batch NM-7 also showed the maximum in vitro drug release (87.6%) in a 0.05 M sodium lauryl sulfate solution. The release data revealed that the NM followed first-order kinetics. The outcomes of the study revealed the development of a stable oral NM containing fenofibrate using the high shear homogenization technique. This approach may aid in further enhancing the oral bioavailability of fenofibrate, which requires further in vivo studies.

New insights into the mechanisms of ultrasonic emulsification in the oil-water system and the role of gas bubbles

Ultrasonic emulsification (USE) assisted by cavitation is an effective method to produce emulsion droplets. However, the role of gas bubbles in the USE process still remains unclear. Hence, in the present paper, high-speed camera observations of bubble evolution and emulsion droplets formation in oil and water were used to capture in real-time the emulsification process, while experiments with different gas concentrations were carried out to investigate the effect of gas bubbles on droplet size. The results show that at the interface of oil and water, gas bubbles with a radius larger than the resonance radius collapse and sink into the water phase, inducing (oil-water) blended liquid jets across bubbles to generate oil-in-water-in-oil (O/W/O) and water-in-oil (W/O) droplets in the oil phase and oil-in-water (O/W) droplets in the water phase, respectively. Gas bubbles with a radius smaller than the resonance radius at the interface always move towards the oil phase, accompanied with the generation of water droplets in the oil phase. In the oil phase, gas bubbles, which can attract bubbles nearby the interface, migrate to the interface of oil and water due to acoustic streaming, and generate numerous droplets. As for the gas bubbles in the water phase, those can break neighboring droplets into numerous finer ones during bubble oscillation. With the increase in gas content, more bubbles undergo chaotic oscillation, leading to smaller and more stable emulsion droplets, which explains the beneficial role of gas bubbles in USE. Violently oscillating microbubbles are, therefore, found to be the governing cavitation regime for emulsification process. These results provide new insights to the mechanisms of gas bubbles in oil-water emulsions, which may be useful towards the optimization of USE process in industry.

Synthesis of nano-fibers containing nano-curcumin in zein corn protein and its physicochemical and biological characteristics

Curcumin contains many biological activities as a natural bioactive substance, however, its low solubility stands as a huge bioavailability disadvantage. Recently, different methods have been developed for utilizing the tremendous medicinal properties of this material. In this study, an Oil/Water nano-emulsion of curcumin (Nano-CUR) has been woven in zein polymer at three percentages of 5%, 10%, and 15% (v/v). We have investigated the physicochemical properties of nanofibers (NFs) including FESEM, FTIR, tensile strength, encapsulation efficiency, and release profile, as well as biological properties. According to the data, the NFs have been observed to become significantly thinner and more uniformed as the involved percentage of Nano-CUR had been increased from 5 to 15%. It is considerable that the tensile strength can be increased by heightening the existing Nano-CUR from 5% towards 15%. The resultant NFs of zein/Nano-CUR 15% have exhibited higher in vitro release and lower encapsulation efficiency than the other evaluated zein/Nano-CUR NFs. It has been confirmed through the performed viability and antioxidant studies that zein/Nano-CUR 10% NFs are capable of providing the best conditions for cell proliferation. Considering the mentioned facts, this work has suggested that Nano-CUR can be successfully woven in zein NFs and maintain their biological properties.

Optical Density Value and Ratio as Novel Indexes for Nanoemulsion Sterile Filtration Process Control or Characterization

Sterile filtration is an effective method to remove any microorganisms present during nanoemulsion preparation. However, it lacks effective control parameters. Here, we established a simple and rapid approach for the process control of nanoemulsion sterile filtration by utilizing optical density detection as a process control parameter. During sterile filtration, the optical density or optical density ratio of the filtrate were continuously monitored to explore the correlation between optical density and the emulsion content and the change in the optical density ratio before and after sterile filtration. In the emulsion stability test, the optical density ratio was determined. A good correlation was obtained between the optical density and the nanoemulsion content during sterile filtration, thereby reducing sterile filtration loss. The optical density ratio changed significantly after sterile filtration, indicating that it could be used as a process control parameter to monitor leakage during emulsion sterile filtration. The optical density ratio can be a characterization index for stability monitoring as it is more sensitive than particle size detection and more convenient than large particle detection. These parameters may be used for sterile filtration process control and as an index for nanoemulsion characterization. This approach overcomes the limitations of existing nanoemulsion characterization methods.

Nanoemulsion: A Novel Drug Delivery Approach for Enhancement of Bioavailability

BACKGROUND

Poor bioavailability and solubility of drugs in aqueous phase are the most important problems of newly developed chemical entities that can be improved by nanoemulsion.

OBJECTIVES

BCS class II and IV which are poorly soluble in water demonstrate various problems in conventional dosage forms. For the improvement of solubility, bioavailability and getting the best therapeutic effect of poorly soluble drugs nanoemulsion is the best solution.

METHODS

Nanoemulsion are thermodynamically unstable isotropic system with droplet size 1-100 nm in which two immiscible fluids are combined together to form one phase by using an emulsifying agent. Nanoemulsion can be designed to promote the bioavailability of API by trapping them inside.

RESULTS

Nanoemulsion can be developed in many dosage forms such as oral, parenteral, topical, ophthalmic dosage form in large scale using common operation at a very low cost. Large range of lipophilic drugs can be easily incorporated in nanoemulsion.

CONCLUSION

In this review, attention is focused on the type of nanoemulsions, their advantages over other dosage form, method for their preparation, characterization, applications and patents in various fields.

Scalable fabrication of tunable titanium nanotubes via sonoelectrochemical process for biomedical applications

Titanium does not react well with the human tissues and due to its bio-inert nature the surface modification has yet to be well-studied. In this study, the sonoelectrochemical process has been carried out to generate TiO₂ nanotube arrays on implantable Ti 6-4. All the prepared nanotubes fill with the vancomycin by immersion and electrophoresis method. Drug-releasing properties, antibacterial behavior, protein adsorption and cell attachment of drug-modified nanotubes are examined by UV-vis, flow cytometry, modified disc diffusion, BSA adsorption, and FESEM, respectively. The most uniform morphology, appropriate drug release, cell viability behavior and antibacterial properties can be achieved by samples anodized in the range of 60-75 V. Also improves the adsorption of BSA protein in bone healing and promotes osteoblast activity and osseointegration. Drug loading efficiency increases up to 60% via electrophoresis comparing the immersion method for anodized sample in 75 V. While electrophoresis does not affect the amount of vancomycin adsorption for lower voltages. Besides, the present study indicates that an anodized sample without drug loading has no antibacterial activity. Moreover, 28-days drug releasing from nanotubes is investigated by mathematical formula according to Fickian's law to find an effective dose of loaded drug.