Coupling ARB-based biological and photochemical (UV/TiO2 and UV/S2O82-) techniques to deal with sanitary landfill leachate

Utilization of plant-derived wastes as the potential biohydrogen source: a sustainable strategy for waste management

The sustainable economy has shown a renewed interest in acquiring access to the resources required to promote innovative practices that favor recycling and the reuse of existing, unconsidered things over newly produced ones. The production of biohydrogen through dark anaerobic fermentation of organic wastes is one of the intriguing possibilities for replacing fossil-based fuels through the circular economy. At present, plant-derived waste from the agro-based industry is the main global concern. When these wastes are improperly disposed of in landfills, they become the habitat for several pathogens. Additionally, it contaminates surface water as a result of runoff, and the leachate that is created from the waste enters groundwater and degrades its quality. However, cellulose and hemicellulose-rich plant wastes from agriculture fields and agro-based industries have been employed as the most efficient feedstock since carbohydrates are the primary substrate for the synthesis of biohydrogen. To produce biohydrogen from plant-derived wastes on a large scale, it is necessary to explore comprehensive knowledge of lab-scale parameters and pretreatment strategies. This paper summarizes the problems associated with the improper management of plant-derived wastes and discusses the recent developments in dark fermentation and substrate pretreatment techniques with the goal of gaining significant insight into the biohydrogen production process. It also highlights the utilization of anaerobic digestate, which is left over after biohydrogen gas as feedstock for the development of value-added products such as volatile fatty acids (VFA), biochar, and biofertilizer.

Evaluating the Impact of Cl2•- Generation on Antibiotic-Resistance Contamination Removal via UV/Peroxydisulfate

The removal of antibiotic-resistant bacteria (ARB) and antibiotic-resistance genes (ARGs) using sulfate anion radical (SO4•-)-based advanced oxidation processes has gained considerable attention recently. However, immense uncertainties persist in technology transfer. Particularly, the impact of dichlorine radical (Cl2•-) generation during SO4•--mediated disinfection on ARB/ARGs removal remains unclear, despite the Cl2•- concentration reaching levels notably higher than those of SO4•- in certain SO4•--based procedures applied to secondary effluents, hospital wastewaters, and marine waters. The experimental results of this study reveal a detrimental effect on the disinfection efficiency of tetracycline-resistant Escherichia coli (Tc-ARB) during SO4•--mediated treatment owing to Cl2•- generation. Through a comparative investigation of the distinct inactivation mechanisms of Tc-ARB in the Cl2•-- and SO4•--mediated disinfection processes, encompassing various perspectives, we confirm that Cl2•- is less effective in inducing cellular structural damage, perturbing cellular metabolic activity, disrupting antioxidant enzyme system, damaging genetic material, and inducing the viable but nonculturable state. Consequently, this diminishes the disinfection efficiency of SO4•--mediated treatment owing to Cl2•- generation. Importantly, the results indicate that Cl2•- generation increases the potential risk associated with the dark reactivation of Tc-ARB and the vertical gene transfer process of tetracycline-resistant genes following SO4•--mediated disinfection. This study underscores the undesired role of Cl2•- for ARB/ARGs removal during the SO4•--mediated disinfection process.

Treatment of landfill leachate using photocatalytic based advanced oxidation process - a critical review

Landfill leachate is a discrete volumetric component of municipal solid waste; hence, researchers and professionals are more concerned about it because of its obscurity. Innovative treatment and emerging technologies are being scrutinized to address the treatment of landfill leachate challenges. The leading target of this review was to examine the possibility of removing recalcitrant organic pollutants from landfill leachate by photocatalytic-based advanced oxidation processes. A summary of the systematic applicability of conventional treatment for landfill leachate is provided, with a focus on physico-chemical and biological processes. The biological treatment, such as aerobic and anaerobic digestion, is an excellent technique for treating highly concentrated organic pollutants in the wastewater. However, Leachate can scarcely be treated using conventional techniques since it is enriched with refractory organics and inorganic ions. It is clear from the literature review that none of the available combinations of physico-chemical and biological treatments are entirely relevant for the removal of recalcitrant organic pollutants from leachate. Recently, the photo-assisted TiO2/ZnO oxidation has shown an excessively potential and feasible way to treat landfill leachate. TiO2/ZnO photocatalysis is currently developing to treat recalcitrant organic pollutants from landfill leachate. The effect of operating parameters reveals that pH and temperature affect the reaction rate. The addition of oxidant H2O2 to the TiO2/ZnO suspension suggests that TiO2 leads to an increase in the rate of reaction when compared to ZnO. Photocatalytic remediation technique of landfill leachate would support the goal of environmental sustainability by greatly enhancing the effectiveness of treated leachate reutilization. In this review, the selection of the best photocatalytic treatment for leachate based on its systematic relevance and potential conditions, characteristics, cost-effectiveness, essential controlling, discharge limit, long-term environmental effects, and its future study perspectives are emphasized and discussed.

Flocculation synergistic with nano zero-valent iron augmented attapulgite @ chitosan as Fenton-like catalyst for the treatment of landfill leachate

In this study, nano-zero-valent iron (NZVI) was added to attapulgite/chitosan and used as a catalyst in the heterogeneous Fenton process to degrade stabilized landfill leachate. Landfill leachate has serious environmental impacts due to the complexity and diversity of its pollutants. A magnetic catalyst (NZVI@PATP/CS) was prepared by a liquid-phase reduction method. The NZVI@PATP/CS were characterized by XRD, FTIR and SEM. The pH of leachate and the dosage of catalyst and H2O2 were changed to determine the best-operating conditions for the effective removal of chemical oxygen demand (COD) and total phosphorus(TP). To understand the adsorption degradation mechanism, the quenching experiments of free radicals were carried out. The results showed that the degradation rates of COD and TP were 66% and 92%, respectively, under the optimum pH value of 8, the dosage of H2O2 of 5 mL, and the dosage of the catalyst of 0.25 g for 60 min.

A Recent Progress in the Leachate Pretreatment Methods Coupled with Anaerobic Digestion for Enhanced Biogas Production: Feasibility, Trends, and Techno-Economic Evaluation

Landfill leachate (LFL) treatment is a severe challenge due to its highly viscous nature and various complex pollutants. Leachate comprises various toxic pollutants, including inorganic macro/nano components, xenobiotics, dissolved organic matter, heavy metals, and microorganisms responsible for severe environmental pollution. Various treatment procedures are available to achieve better effluent quality levels; however, most of these treatments are nondestructive, so pollutants are merely transported from one phase to another, resulting in secondary contamination. Anaerobic digestion is a promising bioconversion technology for treating leachate while producing renewable, cleaner energy. Because of its high toxicity and low biodegradability, biological approaches necessitate employing other techniques to complement and support the primary process. In this regard, pretreatment technologies have recently attracted researchers' interest in addressing leachate treatment concerns through anaerobic digestion. This review summarizes various LFL pretreatment methods, such as electrochemical, ultrasonic, alkaline, coagulation, nanofiltration, air stripping, adsorption, and photocatalysis, before the anaerobic digestion of leachate. The pretreatment could assist in converting biogas (carbon dioxide to methane) and residual volatile fatty acids to valuable chemicals and fuels and even straight to power generation. However, the selection of pretreatment is a vital step. The techno-economic analysis also suggested the high economic feasibility of integrated-anaerobic digestion. Therefore, with the incorporation of pretreatment and anaerobic digestion, the process could have high economic viability attributed to bioenergy production and cost savings through sustainable leachate management options.

Leachate decontamination through biological processes coupled to advanced oxidation: A review

The landfill leachate is considered a toxic effluent composed of recalcitrant contaminants that requires innovative alternatives for its decontamination. Coupling between advanced oxidation processes (AOPs) and aerobic biological treatments are highlighted in this research. Therefore, a bibliographic review of the research made from 2010 to 2021 was developed. These combined alternatives were applied in leachates, and it is oriented toward the analysis of knowledge gaps, trends, and future proposals of the treatment combined that contribute to researchers who wish to work on the subject. These kinds of treatments were chosen due to a bibliometric analysis made. Also, the information was searched in several scientific database. This work was found to be unpublished, as no reviews were found so far that agglomerate studies of coupling between photocatalytic and aerobic biological processes to treat leachates. Besides, AOPs are ideal for treating wastewater of complex composition, however, when it is used as the only treatment, they are usually unprofitable, which justifies their coupling with biological treatments. Subsequently, it was determined that the knowledge main gap is the lack of documentation of treatment costs, which makes it difficult to implement on a real scale. In addition to this, the couplings trends are toward doping with metallic and nonmetallic ions of the catalyst used in the photocatalytic process to improve the efficiency of these. Finally, future research should work on finding alternatives that allow the optimization of the resources used in the combined systems and on promoting the recovery of existing products in the leachate.Implications: Leachates generate several environmental impacts due to their toxic composition. Even when coupling between heterogeneous photocatalysis and biologic treatment can solve them, issues like cost analysis and the scaling-up factor have not been developed, and futures researchers should work on that. Besides, the trend founded in almost all investigations was the catalyst doping with metals and nonmetals ions, particularly when they use TiO2 because it gives the possibility of improving efficiencies just with a structural variation. Finally, these treatment combinations require more analyses and comparison of their remotion over emerging pollutants and their performance with new designs.

Experimental Study on the Treatment of Landfill Leachate by Electro-Assisted ZVI/UV Synergistic Activated Persulfate System

To solve the problem of the poor treatment of high concentration landfill leachate, an electro-assisted ultraviolet (UV)/zero-valent iron (ZVI) synergic activated persulfate (PS) system was used to treat landfill leachate. The effects of PS and ZVI dosage, initial pH value, and current density on the removal efficiency of COD and NH3-N in landfill leachate were investigated. The treatment effects of single PS, single electrochemical, UV/PS, electro-assisted ZVI activated PS, and electro-assisted ZVI/UV co-activated PS were compared. At the same time, UV-visible and three-dimensional fluorescence spectroscopy were performed on the landfill leachate before and after treatment. The results show that under the optimal conditions of initial pH = 3, the dosage of PS/12COD = 1, ZVI = 1.5 g/L, current density 62.5 mA/cm2, and t = 6 h, most of the macromolecular organic substances such as humic acid and fulvic acid were removed. Removal efficiencies of COD, NH3-N, and Chroma reached 81.99%, 89.90%, and 99.75%, respectively. The BOD5/COD value increased from 0.23 to 0.46. In addition, the radical identification results showed that the degradation of COD was due to the combined action of sulfate radicals (SO4•−) and hydroxyl radicals (•OH) and that SO4•− was dominant. The combined means of synergistic activation of PS for landfill leachate treatment was significantly better than that of single means of PS activation, confirming that electrically assisted ZVI/UV synergistic activation of PS is a promising method for landfill leachate treatment.

Recent progress in treatment of dyes wastewater using microbial-electro-Fenton technology

Globally, textile dyeing and manufacturing are one of the largest industrial units releasing huge amount of wastewater (WW) with refractory compounds such as dyes and pigments. Currently, wastewater treatment has been viewed as an industrial opportunity for rejuvenating fresh water resources and it is highly required in water stressed countries. This comprehensive review highlights an overall concept and in-depth knowledge on integrated, cost-effective cross-disciplinary solutions for domestic and industrial (textile dyes) WW and for harnessing renewable energy. This basic concept entails parallel or sequential modes of treating two chemically different WW i.e., domestic and industrial in the same system. In this case, contemporary advancement in MFC/MEC (METs) based systems towards Microbial-Electro-Fenton Technology (MEFT) revealed a substantial emerging scope and opportunity. Principally the said technology is based upon previously established anaerobic digestion and electro-chemical (photo/UV/Fenton) processes in the disciplines of microbial biotechnology and electro-chemistry. It holds an added advantage to all previously establish technologies in terms of treatment and energy efficiency, minimal toxicity and sludge waste, and environmental sustainable. This review typically described different dyes and their ultimate fate in environment and recently developed hierarchy of MEFS. It revealed detail mechanisms and degradation rate of dyes typically in cathodic Fenton system under batch and continuous modes of different MEF reactors. Moreover, it described cost-effectiveness of the said technology in terms of energy budget (production and consumption), and the limitations related to reactor fabrication cost and design for future upgradation to large scale application.

Advanced catalytic oxidation coupled to biological systems to treat pesticide-contaminated water: A review on technological trends and future challenges

This article had the one and only objective of consolidating the couplings of advanced oxidation processes and biological systems in the decontamination of wastewater with pesticide content reported in the Scopus and Web of Science databases, through a critical analysis of which have been the most used, what methodologies have been implemented to develop them, identifying the objectives of each work, determining the success of the research and where the main niches of knowledge are, which can lead to the generation of new scientific knowledge as well as future trends. A co-occurrence analysis was carried out through the VOSViewer software to determine the most associated key words with the treatment configurations described above. Fenton and Photo-Fenton processes, heterogeneous photocatalysis TiO₂/UV, electrocatalysis, ozonization and a particular case of hydrodynamic cavitation-ozone as main advanced oxidation processes, together with advanced biological processes such as sequential batch bioreactor (SBR), membrane bioreactor (MBR), mobile bed biofilm reactor (MBBR); biodegradability and toxicity tests with bacterial strains and surface wetlands, whose treatment philosophy is activated sludge. The main future trends are the reuse of treated wastewater, the analysis and control of costs towards the efficient use of resources and the primary study of the byproducts generated in advanced oxidation to improve the efficiencies in the coupling.

Advances in Biological Nitrogen Removal of Landfill Leachate

With the development of economy and the improvement of people’s living standard, landfill leachate has been increasing year by year with the increase in municipal solid waste output. How to treat landfill leachate with high efficiency and low consumption has become a major problem, because of its high ammonia nitrogen and organic matter content, low carbon to nitrogen ratio and difficult degradation. In order to provide reference for future engineering application of landfill leachate treatment, this paper mainly reviews the biological treatment methods of landfill leachate, which focuses on the comparison of nitrogen removal processes combined with microorganisms, the biological nitrogen removal methods combined with ecology and the technology of direct application of microorganisms. In addition, the mechanism of biological nitrogen removal of landfill leachate and the factors affecting the microbial activity during the nitrogen removal process are also described. It is concluded that the treatment processes combined with microorganisms have higher nitrogen removal efficiency compared with the direct application of microorganisms. For example, the nitrogen removal efficiency of the combined process based on anaerobic ammonium oxidation (ANAMMOX) technology can reach more than 99%. Therefore, the treatment processes combined with microorganisms in the future engineering application of nitrogen removal in landfill leachate should be paid more attention to, and the efficiency of nitrogen removal should be improved from the aspects of microorganisms by considering factors affecting its activity.

Degradation of Landfill Leachate Using UV-TiO2 Photocatalysis Combination with Aged Waste Reactors

This study explored the performance of TiO2 nanoparticles in combination with aged waste reactors to treat landfill leachate. The optimum conditions for synthesis of TiO2 were determined by a series of characterizations and removal rates of methyl orange. The effect of the ultraviolet irradiation time, amount of the catalyst, and pH on the removal efficiency for the chemical oxygen demand (COD) and color in the leachate was explored to determine the optimal process conditions, which were 500 min, 4 g/L and 8.88, respectively. The removal rates for COD and chroma under three optimal conditions were obtained by the single factor control method: 89% and 70%; 95.56% and 70%; and 85% and 87.5%, respectively. Under optimal process conditions, the overall average removal rates for ammonium nitrogen (NH4+–N) and COD in the leachate for the combination of TiO2 nanoparticles and an aged waste reactor were 98.8% and 32.5%, respectively, and the nitrate (NO3−–N) and nitrite nitrogen (NO2–N) concentrations were maintained at 7–9 and 0.01–0.017 mg/L, respectively. TiO2 nanoparticles before and after the photocatalytic reaction were characterized by emission scanning electron microscopy, energy dispersive spectroscopy, X-ray diffraction, and Fourier transform infrared spectrometry. In addition, TiO2 nanoparticles have excellent recyclability, showing the potential of the photocatalytic/biological combined treatment of landfill leachate. This simulation of photocatalysis-landfilling could be a baseline study for the implementation of technology at the pilot scale.

Effective treatment of high-salinity landfill leachate using ultraviolet/ultrasonication/ peroxymonosulfate system

Landfill leachate, as a complex medium with a high concentration of organic and mineral materials, is a serious problem for the environment. In the current study, the saline landfill leachate of Bushehr coastal city (Iran) was treated using ultraviolet/ultrasonic waves/peroxymonosulfate system. The initial TOC and TDS of the studied leachate was 915 mg/L and 7390 mg/L, respectively. The system had the maximum efficiency at conditions of pH 3, peroxymonosulfate (PMS) of 4 mM, and reaction time of 150 min. Based on the findings, the initial ratio of BOD₅/COD (0.66) was reduced to 0.38 using the developed system. After treatment of the landfill leachate at the optimal condition, the values of COD, BOD₅, and UV₂₅₄ were reached to 983 mg/L, 348 mg/L, and 10.16 cm^-1, respectively. The concentration of all studied elements (except Pb, As, and Ca) increased after purification. According to the GC-mass spectrometry, the molecular weight and concentration of organic matter in raw leachate were higher than that of the treated one. The studied system had an energy consumption value of 86 kW·h/m³ for the treatment of landfill leachate. The results confirm the effectiveness of the ultraviolet/ultrasonic waves/PMS system for the treatment of high saline landfill leachate.

Effective blockage of chloride ion quenching and chlorinated by-product generation in photocatalytic wastewater treatment

Photocatalytic degradation of pollutants in high salinity wastewater usually shows extremely low activities and produces highly toxic by-products, often related to the presence of excess chloride ion (Cl^-). Herein, we report for the first time that involvement of Cl^- (quenching active species and generating chlorinated by-products) could be effectively blocked during photocatalytic processes. Based on a comprehensive investigation of its mechanism, we found that Cl^- could quench superoxide radicals (O₂^-) through a cyclic indirect quenching model with holes (h⁺) and hydroxyl radicals (OH) quenching as "initiators". Thus, scavenging h⁺ and OH could successfully block the chain reactions between Cl^- and O₂^-, and photocatalytic degradation of methyl orange (a refractory dye, with O₂^- as dominant attacking species) could be enhanced by nearly 50 times, even when Cl^- content was up to 10 wt%. More importantly, both HPLC-MS analyses and DFT calculation validated that, by blocking its quenching effect, Cl^- could be successfully excluded from the pollutant degradation processes, thus preventing the generation of toxic chlorinated by-products. This work provides new insights into control of chlorinated by-products and proposes feasible strategies to extend photocatalytic technology in high salinity wastewater.

Recent advances in municipal landfill leachate: A review focusing on its characteristics, treatment, and toxicity assessment

Nowadays, sanitary landfilling is the most common approach to eliminate municipal solid waste, but a major drawback is the generation of heavily polluted leachates. These leachates must be appropriately treated before being discharged into the environment. Generally, the leachate characteristics such as COD, BOD/COD ratio, and landfill age are necessary determinants for selection of suitable treatment technologies. Rapid, sensitive and cost-effective bioassays are required to evaluate the toxicity of leachate before and after the treatment. This review summarizes extensive studies on leachate treatment methods and leachate toxicity assessment. It is found that individual biological or physical-chemical treatment is unable to meet strict effluent guidelines, whereas a combination of biological and physical-chemical treatments can achieve satisfactory removal efficiencies of both COD and ammonia nitrogen. In order to assess the toxic effects of leachate on different trophic organisms, we need to develop an appropriate matrix of bioassays based on their sensitivity to various toxicants and a multispecies approach using organisms representing different trophic levels. In this regard, a reduction in toxicity of the treated leachate will contribute to assessing the effectiveness of a specific remediation strategy.

Enhanced degradation of 1-naphthol in landfill leachate using Arthrobacter sp

Arthrobacter sp. named as JY5-1 isolated from contaminated soil of a coking plant can degrade 1-naphthol as the sole carbon source. Through identification of species, analysis of the optimal degradation condition and kinetic equation, the degradation characteristic of Arthrobacter sp. JY5-1 was obtained. Later, the acclimated strain was added into the bio-reactor to observe treatment performance of landfill leachate. The results showed that the optimal conditions for strain JY5-1 biodegradation in the study were pH 7.0 and 30^oC. The bio-reactor operation experiment declared that Arthrobacter sp. JY5-1 had a strengthened effect on COD removal of landfill leachate. Moreover, the efficiency of COD removal could be high and stable when JY5-1 was accumulated as a biofilm together with active sludge. These results demonstrate that adding 1-naphthol-degrading strain JY5-1 is a feasible technique for the enhanced treatment of sanitary landfill leachate, providing theoretical support for engineering utilization.

Biomass growth and its mobility in an AnSBBR treating landfill leachate

This work used a pilot scale (with a total volume of 1300 L) Anaerobic Sequencing Batch Biofilm Reactor (AnSBBR) to treat landfill leachate from São Carlos-SP (Brazil) as well as to evaluate the biomass growth and its behavior. Biomass from the bottom of a landfill leachate stabilization pond was immobilized in polyurethane foam cubes as inoculum. The leachate characteristics varied during the experiment. Ethanol or volatile fatty acids were added as additional substrate when the leachate was temporarily recalcitrant. After acclimation, the AnSBBR presented efficiency over 70% (COD removal). A mass balance model, biomass sampling and temporal concentration profiles were performed to obtain a biomass yield coefficient of Y_X/S = 0.0251 ± 0.0006 g_TVS g_{COD removed} (r² = 0.999). Additionally, it was observed that a variable fraction of the attached biomass may detach itself or present mobility during the batch time, however returning to fixed bed depending on the substrate type and concentration. This behavior has never been reported by the literature for attached biomass.

Mature landfill leachate utilization using a cost-effective hybrid method

The main goal of this study was to investigate the co-digestion of sewage sludge and mature landfill leachate pretreated through hydrodynamic cavitation. The process efficiency was analyzed from the aspects of organics removal, biogas production, kinetics and digestate quality. Energy efficiency of the overall treatment was evaluated as well. A dose of hydrodynamically cavitated leachate of 5% v/v was used as a substrate for co-digestion with sewage sludge at a hydraulic retention time of 20 days. This improved the kinetics, biogas production and corresponding yields, as well as digestate quality. Fourier transform infrared photoacoustic spectroscopy analysis seemed to indicate that no new toxic compounds were formed with co-digestion. The investigated two-stage treatment is recommended as a safe and cost-effective method of utilizing mature leachate.

Power generation and pollutants removal from landfill leachate in microbial fuel cell: Variation and influence of anodic microbiomes

MFC was studied using young and old landfill leachate substrate to remove pollutants and produce renewable energy coupled with study of anodic microbiomes. The power output of 96.8mWm^-2 with COD removal of 90.0±1.2% was achieved at 60% young leachate in batch mode, which decreased to 75mWm^-2 having 55.5% COD abatement in continuous mode employing 100% young leachate. Power production using simulated wastewater without organic source proved that ammonium could also serve as fuel in MFC. The high ammonium dosage increased the overall system performance but beyond a certain limit, the inhibitory effect intensified. Nitrogen removal (66.0±3.3% NH₄⁺-N and 86.0±0.1% NO₂^--N) occurred obeying different removal pathways. Sequencing analyses revealed that anammox bacteria (2%), denitrifying bacteria (5%) and electrogenic bacteria (15%) were in abundance of the microbial community in the anode. This technology can be promising for leachate treatment and power production however certain constraints still exist in pilot scale experiments.