Biochar and activated carbon act as promising amendments for promoting the microbial debromination of tetrabromobisphenol A

Coagulation-centered three-step approach for removing by-product organic pollutants from tetrabromobisphenol A industrial wastewater: Experimental and theoretic investigations

The challenge of meeting discharge standards for tetrabromobisphenol A (TBBPA) production wastewater, characterized by high concentrations of organic by-products, necessitates effective treatment methods. This study identifies 2,4-dibromophenol, 2,6-dibromophenol, 2,4,6-tribromophenol, chlorobenzene, and toluene as the primary organic by-product pollutants. A coagulation-centered three-step approach was established for TBBPA industrial wastewater treatment. The initial step involves acidification treatment to exploit the reduced solubility of 2,4-dibromophenol, 2,6-dibromophenol, and 2,4,6-tribromophenol under acidic conditions, with the optimal pH determined as 2.7-3.1. An acid-activated montmorillonite coagulant (AMC), prepared through roasting and high-pressure acid leaching, exhibits a distinctive "Core-shell" structure, contributing significantly to the combined coagulation and adsorption mechanism. The acid-soluble aluminum salts in AMC form positively charged flocs, electrostatically attracting negatively charged organic compounds in the wastewater. Simultaneously, the porous insoluble silicon framework displays strong adsorption capacity for pollutants. The removal efficiencies for toluene, chlorobenzene, 2,4-dibromophenol, 2,6-dibromophenol, and 2,4,6-tribromophenol reached 88.2%, 89.1%, 88.8%, 87.1%, and 89.4%, respectively. Elemental analysis reveals that the coloration of the wastewater stems from complexation reactions between phenolic compounds and Fe3+, originating from the corrosion of iron or steel reaction vessel. Post-treatment with cation exchange resin resulted in removal efficiencies of 5.2%, 59.1%, 80.2%, 77.9%, and 88.3% for the five substances, respectively. This study outlines a crucial pathway for the effective purification of TBBPA wastewater.

Critical Role of Semiquinones in Reductive Dehalogenation

Quinones and products of their redox reactions (hydroquinones and semiquinones) have been suggested as important players in the reductive dehalogenation of organohalogens mediated by natural and pyrogenic organic matter, although based on limited direct evidence. This study focused on the reductive dehalogenation of a model organohalogen (triclosan) by 1,4-benzohydroquinone (H2Q). In the presence of H2Q only, degradation of triclosan does not occur within the experimental period (up to 288 h); however, it takes place in the presence of H2Q and FeCl3 under anoxic conditions at pH 5 and 7 (above the pKa of SQ = 4.1) only to be halted in the presence of dissolved oxygen. Kinetic simulation and thermodynamic calculations indicated that benzosemiquinone (SQ-) is responsible for the reductive degradation of triclosan, with the fitted rate constant for the reaction between SQ- and triclosan being 317 M-2 h-1. The critical role of semiquinones in reductive dehalogenation can be relevant to a wide range of quinones in natural and engineering systems based on the reported oxidation-reduction potentials of quinones/semiquinones and semiquinones/hydroquinones and supported by experiments with additional model hydroquinones.

Biochar-mediated abiotic and biotic degradation of halogenated organic contaminants - A review

Prevailing global increases in population, urbanization, and agricultural production are causing increased pressures on water resources, especially as the use of chemicals in agriculture, industry, and medicine provide new challenges for water treatment and reuse. Organohalogen compounds are persistent contaminants that often evade current wastewater treatment technologies, resulting in their accumulation in the environment and posing a serious threat to ecosystem health. Recent advances in understanding pyrogenic carbons as electron shuttling and storing materials have exposed their potential for enhancing the dehalogenation and overall degradation of organohalide contaminants in soil, sediment, surface water, and wastewater systems. Biochar is a porous carbonaceous material produced during the thermochemical decomposition of biomass feedstock in the presence of little or no oxygen (pyrolysis). Interest in biochar for application towards environmental remediation is largely based on its three distinct benefits: I) carbon sequestration to offset greenhouse gas emissions, II) adsorption of (in-) organic contaminants and nutrients, and III) a strong electron exchange capacity. Due to the innate complexity of biochar materials, several electron transfer mechanisms exist by which biochar may mediate contaminant degradation. These electron transfer pathways include electron-accepting and donating cycles through redox-active functional groups and direct electron transfer via conductive carbon matrices. These mechanisms are responsible for biochar's participation in multiple redox-driven biogeochemical transformations with proven consequences for effective organohalogen remediation. This literature review summarizes the current knowledge on the mechanisms and processes through which biochar can directly or indirectly mediate the transformation of organohalogen compounds under various environmental conditions. Perspectives and research directions for future application of biochars for targeted remediation strategies are also discussed.

Efficient removal of TBBPA with a Z-scheme BiVO4-(rGO-Cu2O) photocatalyst under sunlight irradiation

In this study, reduced graphene oxide (rGO) was used to fabricate a Z-scheme BiVO₄-(rGO-Cu₂O) photocatalyst for the degradation of Tetrabromobisphenol A (TBBPA) under sunlight irradiation. The photocatalyst was synthesized using a three-step method BiVO₄-(rGO-Cu₂O) photocatalyst with an rGO loading of 1% and (rGO-Cu₂O) to BiVO₄ ratio of 50% achieved the best degradation effect for TBBPA removal. Electron paramagnetic resonance spectroscopy (EPR) confirmed that the charge transfer path of BiVO₄-(rGO-Cu₂O) follows that of Z-scheme photocatalysts. Moreover, the addition of rGO increases the charge transfer efficiency. High performance liquid chromatography-mass spectrometry (HPLC-MS) was used to detect and analyze intermediate products, allowing the proposal of the main degradation pathway of TBBPA. Photogenerated electrons of BiVO₄-(rGO-Cu₂O) were then transferred into the conduction band of Cu₂O. Cu₂O is located in the surface layer, which has the most effective contact area with pollutants, and therefore has a good outcome for the photocatalytic reduction of TBBPA. Photogenerated electrons (e^-) and hydroxyl radicals (∙OH) are the main factors affecting TBBPA degradation. The degradation process of TBBPA includes electron reduction debromination, hydroxylation, and β-cleavage. In our work, BiVO₄-(rGO-Cu₂O) was successfully synthesized to degrade TBBPA; this study brings forth a novel approach for the degradation of halogenated organic pollutants using a Z-scheme photocatalytic composite.

Functional bacterial consortium responses to biochar and implications for BDE-47 transformation: Performance, metabolism, community assembly and microbial interaction

The influence of biochar on the biodegradation of persistent organic pollutants (POPs) has been extensively studied. However, the underlying mechanisms behind the response of functional microbial consortia to biochar remain poorly understood. Herein, we systematically explored the effect of biochar on 2,2',4,4'-tetrabrominated ether (BDE-47) biodegradation, and investigated the interaction and assembly mechanism of the functional bacterial consortium QY2. The results revealed that the biodegradation efficiency of QY2 for BDE-47 increased from 53.85% to 94.11% after the addition of biochar. Fluorescence excitation-emission matrix and electrochemical analysis showed that biochar-attached biofilms were rich in redox-active extracellular polymeric substances (EPS, 3.03-fold higher than free cell), whose strong interaction with biochar facilitated the electron transfer of the biofilm, thus enhancing the debromination degradation of BDE-47. Meanwhile, the assembly model and molecular ecological networks analysis indicated that bacterial community assembly in biofilms was more driven by deterministic processes (environmental selection >75.00%) upon biochar stimulation and exhibited closer interspecific cooperative interactions, leading to higher biodiversity and broader habitat niche breadth for QY2 in response to BDE-47 disturbance. Potential degraders (Methylobacterium, Sphingomonas, Microbacterium) and electrochemical bacteria (Ochrobactrum) were selectively enriched, whose role as keystone bacteria may be participated in biofilm formation and redox-active EPS secretion (r > 0.5, P < 0.05). These findings deepen the understanding of the mechanisms by which biochar promotes microbial degradation of PBDEs and provided a theoretical basis for better regulation of functional bacterial communities during environmental remediation.

The effects of biochar and its applications in the microbial remediation of contaminated soil: A review

The amendment of biochar for soil bioremediation can improve soil conditions, influence soil microbial community, and achieve co-application of biochar-microbe to promote the removal of pollutants. This paper summarizes the positive effects of biochar on microorganisms, including acting as a shelter, providing nutrients, and improving soil conditions (soil aggregation, pH, cation exchange capacity (CEC), and enzymatic activity). These effects will cause variations in microbial abundance, activity, and community structure. Biochar can act as an electron mediator to promote electron transfer in the process of microbial degradation. And the application of biochar in soil bioremediation is also introduced. Nevertheless, toxic substances carried by biochar that may threaten microbial community shouldn't be overlooked. With this review, we can better understand biochar's involvement in soil bioremediation, which will help us choose and modify biochar in a targeted manner for the desired purpose in practical applications.

Mechanistic insight into co-metabolic dechlorination of hexachloro-1,3-butadiene in Dehalococcoides

Hexachloro-1,3-butadiene (HCBD) as one of emerging persistent organic pollutants (POPs) poses potential risk to human health and ecosystems. Organohalide-respiring bacteria (OHRB)-mediated reductive dehalogenation represents a promising strategy to remediate HCBD-contaminated sites. Nonetheless, information on the HCBD-dechlorinating OHRB and their dechlorination pathways remain unknown. In this study, both in vivo and in vitro experiments, as well as quantum chemical calculation, were employed to successfully identify and characterize the reductive dechlorination of HCBD by Dehalococcoides. Results showed that some Dehalococcoides extensively dechlorinated HCBD to (E)-1,2,3-tri-CBD via (E)-1,1,2,3,4-penta-CBD and (Z,E)-1,2,3,4-tetra-CBD in a co-metabolic way. Both qPCR and 16S rRNA gene amplicon sequencing analyses suggested that the HCBD-dechlorinating Dehalococcoides coupled their cell growth with dechlorination of perchloroethene (PCE), rather than HCBD. The in vivo and in vitro ATPase assays indicated ≥78.89% decrease in ATPase activity upon HCBD addition, which suggested HCBD inhibition on ATPase-mediated energy harvest and provided rationality on the Dehalococcoides-mediated co-metabolic dechlorination of HCBD. Interestingly, dehalogenation screening of organohalides with the HCBD-dechlorinating enrichment cultures showed that debromination of bromodichloromethane (BDCM) was active in the in vitro RDase assays but non-active in the in vivo experiments. Further in vitro assays of hydrogenase activity suggested that significant inhibition of BDCM on the hydrogenase activity could block electron derivation from H₂ for consequent reduction of organohalides in the in vivo experiments. Therefore, our results provided unprecedented insight into metabolic, co-metabolic and RDase-active-only dehalogenation of varied organohalides by specific OHRB, which could guide future screening of OHRB for remediation of sites contaminated by HCBD and other POPs.

Sustainable green nanoadsorbents for remediation of pharmaceuticals from water and wastewater: A critical review

In the last three decades, pharmaceutical research has increased tremendously to offer safe and healthy life. However, the high consumption of these harmful drugs has risen devastating impact on ecosystems. Therefore, it is worldwide paramount concern to effectively clean pharmaceuticals contaminated water streams to ensure safer environment and healthier life. Nanotechnology enables to produce new, high-technical material, such as membranes, adsorbent, nano-catalysts, functional surfaces, coverages and reagents for more effective water and wastewater cleanup processes. Nevertheless, nano-sorbent materials are regarded the most appropriate treatment technology for water and wastewater because of their facile application and a large number of adsorbents. Several conventional techniques have been operational for domestic wastewater treatment but are inefficient for pharmaceuticals removal. Alternatively, adsorption techniques have played a pivotal role in water and wastewater treatment for a long, but their rise in attraction is proportional with the continuous emergence of new micropollutants in the aquatic environment and new discoveries of sustainable and low-cost adsorbents. Recently, advancements in adsorption technique for wastewater treatment through nanoadsorbents has greatly increased due to its low production cost, sustainability, better physicochemical properties and high removal performance for pharmaceuticals. Herein, this review critically evaluates the performance of sustainable green nanoadsorbent for the remediation of pharmaceutical pollutants from water. The influential sorption parameters and interaction mechanism are also discussed. Moreover, the future prospects of nanoadsorbents for the remediation of pharmaceuticals are also presented.

Biochar as environmental armour and its diverse role towards protecting soil, water and air

Biochar has been of considerable importance for various environmental applications in recent years. It has exhibited substantial advantages like favourable structural and surface properties, easy process of preparation and widely available feedstocks. These set of exceptional properties make it an efficient, cost-effective and environment friendly source for diversified elimination of pollutants. The heterogeneity of physico-chemical properties offers a possibility for biochar to optimize its efficacy for targeted applications. This review aims to highlight the critical role that biochar plays in various environmental applications, be it in soil, water or air. In particular the article offers a comprehensive review of the recent research findings and updates related to the diversified role of biochar. Also, the interaction of pollutants with biochar functional groups and the impact of variation of parameters on biochar attribute relevant to specific pollutant removal, modifications, mechanisms involved and competence for such removal has been discussed. Different technologies for production of biochar have also been summarized with an emphasis on post treatment of biochar, such as modification and doping. In addition to this, the underlying gaps in the studies carried out so far and recommendations for future research areas in biochar have also been deliberated.

Stimulation of pyrolytic carbon materials as electron shuttles on the anaerobic transformation of recalcitrant organic pollutants: A review

Pyrolytic carbon materials (PCMs) with various surface functionalities are widely used as environmentally friendly and cost-efficient adsorbents for the removal of organic and inorganic pollutants. Recent studies have illustrated that PCMs as electron shuttles (ESs) could also show excellent performances in promoting the anaerobic transformation of recalcitrant organic pollutants (ROPs). Numerous studies have demonstrated the excellent electron-shuttle capability (ESC) of PCMs to stimulate the anaerobic reductive transformation of ROPs. However, there is a lack of consistent understanding of the mechanism of ESC formation in PCMs and the stimulation mechanism for ROPs anaerobic transformation. To gain a more comprehensive understanding of the latest developments in the study of PCMs as ESs for ROPs anaerobic transformation, this review summarizes the formation mechanism, influencing factors, and stimulation mechanisms of ESC. ESC benefits from redox functional groups (quinone and phenol groups), persistent free radicals (PFRs), redox-active metal ions, conductive graphene phase, and porous nature of their surface. The factors influencing ESC include the highest treatment temperature (HTT), feedstocks, modification methods, and environmental conditions, of which, the HTT is the key factor. PCMs promote the reductive transformation of ROPs under anaerobic conditions via abiotic and biotic pathways. Eventually, the prospects for the ROPs anaerobic transformation enhanced by PCMs are proposed.

Anaerobic bacterial responses to carbonaceous materials and implications for contaminant transformation: Cellular, metabolic, and community level findings

Carbonaceous materials (CM) enhance the abundance and activity of bacteria capable of persistent organic (micro)pollutant (POP) degradation. This review synthesizes anaerobic bacterial responses to minimally modified CM in non-fuel cell bioremediation applications at three stages: attachment, metabolism, and biofilm genetic composition. Established relationships between biological behavior and CM surface properties are identified, but temporal relationships are not well understood, making it difficult to connect substratum properties and "pioneer" bacteria with mature microorganism-CM systems. Stark differences in laboratory methodology at each temporal stage results in observational, but not causative, linkages as system complexity increases. This review is the first to critically examine relationships between material and cellular properties with respect to time. The work highlights critical knowledge gaps that must be addressed to accurately predict microorganism-CM behavior and to tailor CM properties for optimized microbial activity, critical frontiers in establishing this approach as an effective bioremediation strategy.

Progress and prospects of applying carbon-based materials (and nanomaterials) to accelerate anaerobic bioprocesses for the removal of micropollutants

Carbon‐based materials (CBM), including activated carbon (AC), activated fibres (ACF), biochar (BC), nanotubes (CNT), carbon xenogels (CX) and graphene nanosheets (GNS), possess unique properties such as high surface area, sorption and catalytic characteristics, making them very versatile for many applications in environmental remediation. They are powerful redox mediators (RM) in anaerobic processes, accelerating the rates and extending the level of the reduction of pollutants and, consequently, affecting positively the global efficiency of their partial or total removal. The extraordinary conductive properties of CBM, and the possibility of tailoring their surface to address specific pollutants, make them promising as catalysts in the treatment of effluents containing diverse pollutants. CBM can be combined with magnetic nanoparticles (MNM) assembling catalytic and magnetic properties in a single composite (C@MNM), allowing their recovery and reuse after the treatment process. Furthermore, these composites have demonstrated extraordinary catalytic properties. Evaluation of the toxicological and environmental impact of direct and indirect exposure to nanomaterials is an important issue that must be considered when nanomaterials are applied. Though the chemical composition, size and physical characteristics may contribute to toxicological effects, the potential toxic impact of using CBM is not completely clear and is not always assessed. This review gives an overview of the current research on the application of CBM and C@MNM in bioremediation and on the possible environmental impact and toxicity.

Redox Properties of Pyrogenic Dissolved Organic Matter (pyDOM) from Biomass-Derived Chars

Chars are ubiquitous in the environment and release significant amounts of redox-active pyrogenic dissolved organic matter (pyDOM). Yet, the redox properties of pyDOM remain poorly characterized. This work provides a systematic assessment of the quantity and redox properties of pyDOM released at circumneutral pH from a total of 14 chars pyrolyzed from wood and grass feedstocks from 200 to 700 °C. The amount of released pyDOM decreased with increasing pyrolysis temperature of chars, reflecting the increasing degree of condensation and decreasing char polarity. Using flow-injection analysis coupled to electrochemical detection, we demonstrated that electron-donating capacities (EDCpyDOM; up to 6.5 mmole-·gC-1) were higher than electron-accepting capacities (EACpyDOM; up to 1.2 mmole-·gC-1) for all pyDOM specimens. The optical properties and low metal contents of the pyDOM implicate phenols and quinones as the major redox-active moieties. Oxidation of a selected pyDOM by the oxidative enzyme laccase resulted in a 1.57 mmole-·gC-1 decrease in EDCpyDOM and a 0.25 mmole-·gC-1 increase in EACpyDOM, demonstrating a largely irreversible oxidation of presumably phenolic moieties. Non-mediated electrochemical reduction of the same pyDOM resulted in a 0.17 mmole-·gC-1 increase in EDCpyDOM and a 0.24 mmole-·gC-1 decrease in EACpyDOM, consistent with the largely reversible reduction of quinone moieties. Our results imply that pyDOM is an important dissolved redox-active phase in the environment and requires consideration in assessing and modeling biogeochemical redox processes and pollutant redox transformations, particularly in char-rich environments.

The role of gut microbial community and metabolomic shifts in adaptive resistance of Atlantic killifish (Fundulus heteroclitus) to polycyclic aromatic hydrocarbons

Altered gut microbiomes may play a role in rapid evolution to anthropogenic change but remain poorly understood. Atlantic killifish (Fundulus heteroclitus) in the Elizabeth River, VA have evolved resistance to polycyclic aromatic hydrocarbons (PAHs) and provide a unique opportunity to examine the links between shifts in the commensal microbiome and organismal physiology associated with evolved resistance. Here, 16S rRNA sequence libraries derived from fish guts and sediments sampled from a highly PAH contaminated site revealed significant differences collected at similar samples from an uncontaminated site. Phylogenetic groups enriched in the libraries derived from PAH-resistant fish were dissimilar to their associated sediment libraries, suggesting the specific environment within the PAH-resistant fish intestine influence the gut microbiome composition. Gut metabolite analysis revealed shifts between PAH-resistant and non-resistant subpopulations. Notably, PAH-resistant fish exhibited reduced levels of tryptophan and increased levels of sphingolipids. Exposure to PAHs appears to impact several bacterial in the gut microbiome, particularly sphingolipid containing bacteria. Bacterial phylotypes known to include species containing sphingolipids were generally lower in the intestines of fish subpopulations exposed to high concentrations of PAHs, inferring a complex host-microbiome relationship. Overall, killifish microbial community shifts appear to be related to a suppression of overall metabolite level, indicating a potential role of the gut in organismal response to anthropogenic environmental change. These results on microbial and metabolomics shifts are potentially linked to altered bioenergetic phenotype observed in the same PAH-resistant killifish populations in other studies.

Enhanced Benzofluoranthrene Removal in Surface Flow Constructed Wetlands with the Addition of Carbon

Polycyclic aromatic hydrocarbons (PAHs), as hazardous pollutants, could be removed by constructed wetlands (CWs). While the traditional substrate of CWs has a weak adsorption capacity for PAHs, in this study, the carbonous fillers-activated carbon (AC) and biochar-were added into the substrate of surface flow CWs to improve the removal performance of benzofluoranthrene (BbFA), a typical PAH. The results showed that the BbFA removal efficiencies in CWs with the addition of AC and biochar were 11.8 and 1.2% higher than those in the Control group, respectively. Simultaneously, the removal efficiencies of NO₃ ^--N were 42.8 and 68.4% in these two CWs, while the BbFA content in the substrate and plants with the addition of carbon was lower than that in the Control group. The addition of carbonous filler reduced the absorption of PAHs by plants in CWs and enhanced microbial degradation. The microbial community results showed that the relative abundance of Proteobacteria, especially γ-proteobacteria, was higher with the addition of fillers, which related to PAH degradation.

Anaerobic Dehalogenation by Reduced Aqueous Biochars

Dehalogenation is one of the most important reactions for eliminating trace organic pollutants in natural and engineering systems. This study investigated the dehalogenation of a model organohalogen compound, triclosan (TCS), by aqueous biochars (a-BCs) (<450 nm). We found that TCS can be anaerobically degraded by reduced a-BCs with a pseudo first-order degradation rate constant of 0.0011-0.011 h^-1. The 288 h degradation fraction of TCS correlated significantly with the amount of a-BC-bound electrons (0.055 ± 0.00024 to 0.11 ± 0.0016 mol e^-/mol C) available for donation after 24 h of pre-reduction by Shewanella putrefaciens CN32. Within the reduction period, the recovery of chlorine based on residual TCS and generated Cl^- ranged from 73.6 to 85.2%, implying that a major fraction of TCS was fully dechlorinated, together with mass spectroscopic analysis of possible degradation byproducts. Least-squares numerical fitting, accounting for the reactions of hydroquinones/semiquinones in a-BCs with TCS and byproducts, can simulate the reaction kinetics well (R² > 0.76) and suggest the first-step dechlorination as the rate-limiting step among the possible pathways. These results showcased that the reduced a-BCs can reductively degrade organohalogens with potential applications for wastewater treatment and groundwater remediation. While TCS was used as a model compound in this study, a-BC-based degradation can be likely applied to a range of redox-sensitive trace organic compounds.

New applications of quinone redox mediators: Modifying nature-derived materials for anaerobic biotransformation process

Due to their wide-distribution, high-biocompatibility and low-cost, nature-derived quinone redox mediators (NDQRM) have shown great potential in bioremediation through mediating electron transfers between microorganisms and between microorganisms and contaminants in anaerobic biotransformation processes. It is obvious that their performance in bioremediation was limited by the availability of quinone-based groups in NDQRM. A sustainable solution is to enhance the electron transfer capacity and retention capacity by the modification of NDQRM. Therefore, this review comprehensively summarized the modification techniques of NDQRM according to their multiple roles in anaerobic biotransformation systems. In addition, their potential applications in greenhouse gas mitigation, contaminant degradation in anaerobic digestion, contaminant bioelectrochemical remediation and energy recovery were discussed. And the problems that need to be addressed in the future were pointed out. The obtained knowledge would promote the exploration of novel NDQRM, and provide suggestions for the design of anaerobic consortia in biotransformation systems.

Functional PVDF ultrafiltration membrane for Tetrabromobisphenol-A (TBBPA) removal with high water recovery

Tetrabromobisphenol-A (TBBPA) is one of the most important brominated flame retardants (BFRs), accounting for 60% of the total commercial BFR market. Increasing amounts of TBBPA and byproducts are released to the aquatic environment due to their extensive utilization in various sectors. However, research on the treatment of TBBPA contaminated wastewater using membrane filtration is still lacked. Herein, a PVDF10-PAA-ZrO₂ membrane was successfully developed and applied for the treatment of high-concentration TBBPA wastewater with super-high water recovery. The membrane was obtained through surface functionalization with nano-ZrO₂ from commercial PVDF ultrafiltration (UF) membrane. Compared to the commercial PVDF membrane, the developed membrane exhibited 4 times of permeate flux which was up to 200 L/m² min with comparable TBBPA rejection rate. Furthermore, the mechanisms of membrane development and TBBPA rejection were explored through synchrotron-based ATR-FTIR and X-ray analyses. It was revealed that ZrO₂ NPs were immobilized into membrane surface through binding with PAA layer, where the O of the carboxyl group combined with the Zr⁴⁺ on the ZrO₂ NP surface to form C-O-Zr bond through monodentate and bridging-bidentate modes. The sieving function of membrane could be the main mechanism of TBBPA removal. This research demonstrated a practical route and solid insight toward the development of highly efficient membrane for TBBPA removal. The proposed PVDF10-PAA-ZrO₂ membrane can also be promising for other industrial separation and purification applications.

Biochar technology in wastewater treatment: A critical review

Biochar is a promising agent for wastewater treatment, soil remediation, and gas storage and separation. This review summarizes recent research development on biochar production and applications with a focus on the application of biochar technology in wastewater treatment. Different technologies for biochar production, with an emphasis on pre-treatment of feedstock and post treatment, are succinctly summarized. Biochar has been extensively used as an adsorbent to remove toxic metals, organic pollutants, and nutrients from wastewater. Compared to pristine biochar, engineered/designer biochar generally has larger surface area, stronger adsorption capacity, or more abundant surface functional groups (SFG), which represents a new type of carbon material with great application prospects in various wastewater treatments. As the first of its kind, this critical review emphasizes the promising prospects of biochar technology in the treatment of various wastewater including industrial wastewater (dye, battery manufacture, and dairy wastewater), municipal wastewater, agricultural wastewater, and stormwater. Future research on engineered/designer biochar production and its field-scale application is discussed. Based on the review, it can be concluded that biochar technology represents a new, cost effective, and environmentally-friendly solution for the treatment of wastewater.

A typical derivative and byproduct of tetrabromobisphenol A: Development of novel high-throughput immunoassays and systematic investigation of their distributions in Taizhou, an e-waste recycling area in eastern China

Environmental distribution and concentration of tetrabromobisphenol A bis- (2-hydroxyethyl) ether (TBBPA-DHEE) and tetrabromobisphenol A mono- (hydroxyethyl) ether (TBBPA-MHEE), are obscure due to the lack of available analytical methods. Here two novel immunoassays were established to systematically investigate their distributions in Taizhou, Eastern China. Five monoclonal antibodies against pollutants were generated with two designed haptens through animal immunization. After matched with different coating antigens/antibodies, ELISAs were established (LOD for TBBPA-DHEE, 0.12 ng/mL, based on OVA-M3/mAb-D4G6; LOD for TBBPA-MHEE, 0.79 ng/mL, based on OVA-M3/mAb-D2G6) and applied for investigation of their occurrences at a typical e-waste recycling area after 2-year samples collection, where the total 33 water, 32 soil and 16 biological samples were collected with the highest concentrations of 3.46 ng/mL, 2.76 ng/g (dry weight, dw) and 5.01 ng/g (dw), respectively. Meanwhile, our study also indicated that at the centralizing e-waste recycling sites the serious pollution for both chemicals still existed despite of various efforts. Besides, obvious improvements were observed at an abandoned e-waste recycling region treated and remedied for many years by the local Chinese government. These findings highlight the importance of policy decisions in treatment of pollutants to reduce organic pollutant-related health risks.

Effect of mangrove species on removal of tetrabromobisphenol A from contaminated sediments

The increase levels of tetrabromobisphenol A (TBBPA) in mangrove wetlands is of concern due to its potential toxic impacts on ecosystem. A 93-day greenhouse pot experiment was conducted to investigate the effects of mangrove plants, A. marina and K. obovata, on TBBPA degradation in sediment and to reveal the associated contributing factor(s) for its degradation. Results show that both mangrove species could uptake, translocate, and accumulate TBBPA from mangrove sediments. Compared to the unplanted sediment, urease and dehydrogenase activity as well as total bacterial abundance increased significantly (p < 0.05) in the sediment planted with mangrove plants, especially for K. obovata. In the mangrove-planted sediment, the Anaerolineae genus was the dominant bacteria, which has been reported to enhance TBBPA dissipation, and its abundance increased significantly in the sediment at early stage (0-35 day) of the greenhouse experiment. Compared to A. marina-planted sediment, higher enrichment of Geobater, Pseudomonas, Flavobacterium, Azoarcus, all of which could stimulate TBBPA degradation, was observed for the K. obovata-planted sediment during the 93-day growth period. Our mass balance result has suggested that plant-induced TBBPA degradation in the mangrove sediment is largely due to elevated microbial activities and total bacterial abundance in the rhizosphere, rather than plant uptake. In addition, different TBBPA removal efficiencies were observed in the sediments planted with different mangrove species. This study has demonstrated that K. obovata is a more suitable mangrove species than A. marina when used for remediation of TBBPA-contaminated sediment.

Biochar as simultaneous shelter, adsorbent, pH buffer, and substrate of Pseudomonas citronellolis to promote biodegradation of high concentrations of phenol in wastewater

Microbial degradation is an elimination method for removal of organic contaminants from soil and water. However, the main factor limiting its practical application is high bacterial sensitivity to environmental factors such as pH, toxicity, and mass transfer. In this study, biochar was produced pyrolytically from peanut shells at 350 °C, 550 °C, and 750 °C (referred to as BC350, BC550, and BC750, respectively) and their promotion on phenol biodegradation in wastewater by the bacterium Pseudomonas citronellolis was investigated. Higher initial phenol concentration (>400 mg L^-1) showed obvious inhibition on biodegradation with the removal efficiencies being less than 46%, and even the bacterium failed to survive at the phenol concentrations of higher than 1000 mg L^-1. With biochar incorporated, the removal efficiencies of phenol increased from below 46% to up to 99% at the initial concentrations of 400-1200 mg L^-1. Immobilization of strains in biochar by calcium alginate further increased the microbial tolerance to high concentrations of phenol (i.e., 63% removal at 1200 mg L^-1). Scanning electron microscopy demonstrated that biochar acted as shelter to support the bacterium to struggle with extreme conditions. The initial adsorption of phenol by biochar alleviated the initial toxicity of phenol to bacterium and the subsequent gradual desorption controlled the bioavailability of phenol. In this regard, BC350 showed a comparable sorption capacity with BC550 and BC750, while a higher desorption potential than them, thus balanced better the toxicity and bioavailability of phenol to microbes. Alkalinity of BC550 and BC750 played important roles in rescuing the microbes from being damaged by pH shock via neutralizing the fast generation of acidic intermediates. The extractable organic substances in BC350 could be consumed by bacterium as substrates, which was confirmed by incubating the strains in water-extractable solution. Results of this study indicate that incorporation of microbes with biochar could promote the biodegradation of high concentration organic wastewater.

Enhanced passivation of lead with immobilized phosphate solubilizing bacteria beads loaded with biochar/ nanoscale zero valent iron composite

Phosphate solubilizing bacteria (PSBs) can effectively enhance the stability of lead via the formation of insoluble Pb-phosphate compounds. This research presents a bio-beads, which was implemented with the help of a self-designed porous spheres carrier, by immobilized PSBs strains Leclercia adecarboxylata (hereafter referred as L1-5). In addition, the passivation efficiency of lead via bio-beads under different conditions and its mechanism were also investigated in this study. The results indicated that phosphate solubilized by bio-beads could reach 30 mg/L in Ca₃(PO₄)₂ medium containing 1 mM Pb²⁺, and the highest removal rate of Pb²⁺ in beef peptone liquid medium could reach 93%, which is better than that of free bacteria. Furthermore, it was also concluded that the lead could be transformed into stable crystal texture, such as Pb₅(PO₄)₃Cl and Pb₅(PO₄)₃OH. Both hydrophobic and hydrophilic groups in the bio-beads could capture Pb²⁺, which indicated that electrostatic attraction and ion-exchange were also the mechanism of Pb²⁺ adsorption. All the experimental findings demonstrated that this bio-bead could be consider as an efficient way for the lead immobilization in contaminated soil in the future.

A new framework for approaching precision bioremediation of PAH contaminated soils

Bioremediation is a sustainable treatment strategy which remains challenging to implement especially in heterogeneous environments such as soil and sediment. Herein, we present a novel precision bioremediation framework that integrates amplicon based metagenomic analysis and chemical profiling. We applied this approach to samples obtained at a site contaminated with polycyclic aromatic hydrocarbons (PAHs). Geobacter spp. were identified as biostimulation targets because they were one of the most abundant genera and previously identified to carry relevant degradative genes. Mycobacterium and Sphingomonads spp. were identified as bioaugmentation and genetic bioaugmentation targets, respectively, due to their positive associations with PAHs and their high abundance and species diversity at all sampling locations. Overall, this case study suggests this framework can help identify bacterial targets for precision bioremediation. However, it is imperative that we continue to build our databases as the power of metagenomic based approaches remains limited to microorganisms currently in our databases.

Acetate promotes microbial reductive debromination of tetrabromobisphenol A during the startup phase of anaerobic wastewater sludge bioreactors

The detection of increasing concentrations of tetrabromobisphenol A (TBBPA) in wastewater treatment plants is raising concerns as TBBPA has been identified as a potentially toxic flame retardant. The objectives of this study were to evaluate the effect of acetate biostimulation on TBBPA microbial reductive debromination, and the response of anaerobic sludge associated microbial communities repeatedly exposed to TBBPA. Results indicate that the bulk of the microbial community did not experience significant shifts as a result of TBBPA exposure, and that only a small fraction of the community responded to the presence of TBBPA. Taxa most likely responsible for TBBPA transformation affiliated to Clostridiales and the wastewater sludge group Blvii28. The biostimulating effect of acetate was only observed during reactor startup, when acetogenesis was likely not yet occurring. However, when acetate likely started to be microbially generated in the reactor, acetate addition resulted in a slight but significant inhibiting effect on TBBPA transformation. A significant increase of hydrogenotrophic methanogens in the TBBPA-spiked reactor overtime implies that TBBPA degraders were not in direct competition with methanogens for H₂. These results strongly suggest that TBBPA degrading taxa might have been primarily using acetate as an electron donor for the reductive debromination of TBBPA.

Metabarcoding and machine learning analysis of environmental DNA in ballast water arriving to hub ports

While ballast water has long been linked to the global transport of invasive species, little is known about its microbiome. Herein, we used 16S rRNA gene sequencing and metabarcoding to perform the most comprehensive microbiological survey of ballast water arriving to hub ports to date. In total, we characterized 41 ballast, 20 harbor, and 6 open ocean water samples from four world ports (Shanghai, China; Singapore; Durban, South Africa; Los Angeles, California). In addition, we cultured Enterococcus and E. coli to evaluate adherence to International Maritime Organization standards for ballast discharge. Five of the 41 vessels - all of which were loaded in China - did not comply with standards for at least one indicator organism. Dominant bacterial taxa of ballast water at the class level were Alphaproteobacteria, Gammaproteobacteria, and Bacteroidia. Ballast water samples were composed of significantly lower proportions of Oxyphotobacteria than either ocean or harbor samples. Linear discriminant analysis (LDA) effect size (LEfSe) and machine learning were used to identify and test potential biomarkers for classifying sample types (ocean, harbor, ballast). Eight candidate biomarkers were used to achieve 81% (k nearest neighbors) to 88% (random forest) classification accuracy. Further research of these biomarkers could aid the development of techniques to rapidly assess ballast water origin.

Feasibility of dry anaerobic digestion of beer lees for methane production and biochar enhanced performance at mesophilic and thermophilic temperature

This study investigated the feasibility of dry anaerobic digestion using beer lees as substrate and the effect of cow manure-derived biochar addition on dry anaerobic digestion performance at mesophilic and thermophilic temperature, respectively. With TS content of 25%, maximum cumulative methane production and yield were achieved to be 5230 ± 91 mL d^-1 and 220.1 ± 7.7 mL g^-1 VS at mesophilic condition and 7386 ± 134 mL d^-1 and 310.4 ± 9.2 mL g^-1 VS at thermophilic condition in the control cultures. The biochar addition has a positive effect in improving dry anaerobic digestion performance. The maximum cumulative methane production and yield in the cultures with 10 g L^-1 biochar were substantially improved by 82.9% and 82.6% at mesophilic condition and 47.2% and 46.8% at mesophilic condition when compared to the control.

Colonization and growth of dehalorespiring biofilms on carbonaceous sorptive amendments

Removal of polychlorinated biphenyls (PCBs) from contaminated sediments is a priority due to accumulation in the food chain. Recent success with reduction of PCB bioavailability due to adsorption onto activated carbon led to the recognition of in situ treatment as a remediation approach. In this study, reduced bioavailability and subsequent break-down of PCBs in dehalorespiring biofilms was investigated using Dehalobium chlorocoercia DF1. DF1 formed a patchy biofilm ranging in thickness from 3.9 to 6.7 µm (average 4.6 ± 0.87 µm), while the biofilm coverage varied from 5.5% (sand) to 20.2% (activated carbon), indicating a preference for sorptive materials. Quantification of DF1 biofilm bacteria showed 1.2-15.3 × 10⁹ bacteria per gram of material. After 22 days, coal activated carbon, bone biochar, polyoxymethylene, and sand microcosms had dechlorinated 73%, 93%, 100%, and 83%, respectively. These results show that a biofilm-based inoculum for bioaugmentation of PCBs in sediment can be an efficient approach.

How wastewater with different nutrient levels influences microbial degradation of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) in anaerobic sediments

While wastewater and polybrominated diphenyl ethers (PBDEs) are commonly both discharged into aquatic ecosystems, little information is known about how wastewaters with different nutrient levels impact on microbial degradation of PBDEs. In this study, we used an anaerobic microcosm experiment to examine how the removal rates of 2,2',4,4'-tetrabromodiphenyl ether (BDE-47) from contaminated sediment varied when exposed to three wastewaters with different nutrient properties, namely livestock wastewater (LS), municipal sewage (MS), and shrimp pond wastewater (SP), and to determine the microbial controls on removal processes. We found that BDE-47 degraded relatively rapidly in MS, which had low carbon and nitrogen concentrations, but degraded much more slowly in LS and SP, which had relatively high nutrient concentrations. The variations in BDE-47 removal in different wastewater were related to iron reduction rates and the abundances of organohalide-respiring bacteria (OHRB). The community compositions of both total bacteria and OHRB from the family Dehalococcoidaceae differed significantly among the wastewater treatments. Compared with other treatments, some bacterial groups with PBDE degradation abilities were more abundant in MS where the PBDE-degradation efficiencies were higher. Our results should help support evaluations of the bioremediation potential of sites that are contaminated with both halogenated organic compounds and nutrient-rich wastewater.

Enhancement of ciprofloxacin sorption on chitosan/biochar hydrogel beads

Biochar is effective in water treatment but it is hard to retrieve or separate biochar powder from aqueous solutions. In this study, the removal of ciprofloxacin from aqueous solutions was investigated using chitosan/biochar hydrogel beads (CBHB). The results showed that the adsorption rate was almost independent of the temperature and occurred at the homogeneous sites of adsorbent thus obeying the Langmuir model. The equilibrium time was varying for different initial concentrations and found to be 48 h for maximum one. The maximum sorption was found to be >76 mg/g of adsorbent out of 160 mg/L as initial concentration. Adsorption obeyed the second-order mechanism with leading role of intra-particle diffusion and outer diffusion. Adsorption capacity decreased from 34.90 mg/g to 15.77 mg/g in the presence of 0.01 N Na₃PO₄ whereas other electrolytes such as NaCl, Na₂SO₄, NaNO₃ with same concentration did not affect the sorption capacity. However, increased concentration of NaCl reduced the sorption capacity to some extent. CBHB showed a mixed mechanism by removing CIP through π-π electron donor-acceptor (EDA) interaction, hydrogen bonding and hydrophobic interaction. The reformation of CBHB with methanol and ethanol instead of water decreased its sorption capacity to 32.69 mg/g and 29.29 mg/g. Adsorption decreased by little after every regeneration of CBHB and was still >64 ± 0.68% (25.73 mg/g) after 6th regeneration. The efficacy of CBHB for CIP removal proved that CBHB is an economical and sustainable adsorbent.