Removal of CX3R-type disinfection by-product precursors from rainwater with conventional drinking water treatment processes

Occurrence and Ecological Risk Assessment of Highly Toxic Halogenated Byproducts during Chlorination Decolorization of Textile Printing and Dyeing Wastewater

Textile printing and dyeing wastewater is a substantial source of highly toxic halogenated pollutants because of the chlorination decolorization. However, information on the occurrence and fate of the highly toxic halogenated byproducts, which are produced by chlorination decolorization of the textile printing and dyeing wastewater, is very limited. In this study, the occurrence of six categories of halogenated byproducts (haloacetic acids (HAAs), haloacetonitriles (HANs), N-nitrosamines (NAs), trihalomethanes, halogenated ketones, and halonitromethanes) was investigated along the full-scale treatment processes of textile printing and dyeing wastewater treatment plants. Furthermore, the ecological risk of the halogenated byproducts was evaluated. The results showed that the total concentration of halogenated byproducts increased significantly after chlorination. Large amounts of HAAs (average 122.1 μg/L), HANs (average 80.9 μg/L), THMs (average 48.3 μg/L), and NAs (average 2314.3 ng/L) were found in the chlorinated textile wastewater, and the results showed that the generations of HANs and NAs were positively correlated with the BIX and β/α index, indicating that the HANs and NAs might form from the microbial metabolites. In addition, HAAs and HANs exhibited high ecological risk quotients (>1), suggesting their high potential ecological risk. The results also demonstrated that most halogenated byproducts could be effectively removed by reverse osmosis treatment processes except NAs, with a lower removal rate of 18%. This study is believed to provide an important theoretical basis for controlling and reducing the ecological risks of halogenated byproducts in textile printing and dyeing wastewater effluents.

Electro-galvanic alkalization and treatment of rainwater to obtain drinking water

Rainwater Electro-Galvanic Alkalization (EGA) was performed using copper and magnesium (1:1) electrode. Efficiently removal of pollutants without external energy consumption was carried out, in addition essential ions were dosed for alkalization of rainwater. The optimal system conditions were obtained using response surface methodology (RSM) by considering the following operating variables: flow rate and concentration of the supporting electrolyte (NaCl and CaCl2). Furthermore, the maximum efficiency of nitrate, ammoniacal nitrogen, colour, and turbidity removal was evaluated. The results showed that the response variables were mainly sensitive to the type of supporting electrolyte used and the flow rate. Under experimental conditions of 0.009 M (NaCl) and 20 mL min-1, the removal rate was 74.19%, 72.49%, and 81.43% for nitrates, colour, and turbidity, respectively, and the lowest concentration of ammoniacal nitrogen (0.99 mg L - 1 ) was obtained. The kinetic models for nitrate and colour were fitted to zero-order models with k = 0.33 mg L - 1 mi n - 1 and k = 0.933 Pt - Co , respectively. In addition, turbidity was fitted to a first-order model ( k = 0.1661 mi n - 1 ) , and ammoniacal nitrogen was fitted to a second-order model ( k = 0.0217 L m g - 1 mi n - 1 ) . The concentration increases of minerals such as Ca and Mg, which rises the rainwater alkalinity after treatment (pH shift from 6.1 to 8.91), was determined by inductively coupled plasma (ICP) analysis.

Occurrence, bioaccumulation, fate, and risk assessment of emerging pollutants in aquatic environments: A review

Significant concerns on a global scale have been raised in response to the potential adverse impacts of emerging pollutants (EPs) on aquatic creatures. We have carefully reviewed relevant research over the past 10 years. The study focuses on five typical EPs: pharmaceuticals and personal care products (PPCPs), per- and polyfluoroalkyl substances (PFASs), drinking water disinfection byproducts (DBPs), brominated flame retardants (BFRs), and microplastics (MPs). The presence of EPs in the global aquatic environment is source-dependent, with wastewater treatment plants being the main source of EPs. Multiple studies have consistently shown that the final destination of most EPs in the water environment is sludge and sediment. Simultaneously, a number of EPs, such as PFASs, MPs, and BFRs, have long-term environmental transport potential. Some EPs exhibit notable tendencies towards bioaccumulation and biomagnification, while others pose challenges in terms of their degradation within both biological and abiotic treatment processes. The results showed that, in most cases, the ecological risk of EPs in aquatic environments was low, possibly due to potential dilution and degradation. Future research topics should include adding EPs detection items for the aquatic environment, combining pollution, and updating prediction models.

Digital imaging-in-flow (FlowCAM) and probabilistic machine learning to assess the sonolytic disinfection of cyanobacteria in sewage wastewater

Assessing the cyanobacteria disinfection in sewage and its compliance with international-standards requires determining the concentration and viability, which can be achieve using Imaging Flow Cytometry device called FlowCAM. The objective is to thoroughly investigate the sonolytic morphological changes and disinfection-performance towards toxic cyanobacteria existing in sewage using the FlowCAM. After optimizing the process conditions, over 80% decline in cyanobacterial cell counts was observed, accompanied by an additional 10-15% of cells exhibiting injuries, as confirmed through morphological investigation. Moreover, for the first time, the experimentally collected data was utilized to build deep-learning probabilistic-neural-networks (PNN) and natural-gradient-boosting (NGBoost) models for predicting disinfection efficiency and ABD area as target outputs. The findings suggest that the NGBoost model exhibited superior prediction performance for both targets, with high test coefficient of determination (R2 > 0.87) and lower test errors (RMSE < 7.10, MAE < 4.14). The confidence interval examination in NGBoost prediction performance showed a minute variation from the experimentally calculated values, suggesting a high accuracy in model prediction. Finally, SHAP analysis suggests the sonolytic time alone contributes around 50% to the cyanobacteria disinfection. Overall, the findings demonstrate the effectiveness of the FlowCAM device and the potential of machine-learning modeling in predicting disinfection outcomes.

Advancing rainwater treatment technologies for irrigation of urban agriculture: A pathway toward innovation

Urban agriculture (UA) has emerged for local food security since the 1960s. However, the access to sufficient and safe irrigation water remains a significant constraint. Municipal water supply, though commonly used in UA practices, proves unsustainable due to high costs, intensive energy consumption, and limited availability in many vacant urban spaces. In contrast, rainwater harvesting (RWH) exhibits a potential as a non-traditional water supply for urban farming. This article aims to provide insights into the advantages and challenges associated with RWH for UA irrigation, analyze existing low-cost RWH treatment technologies, and identify a visionary way toward innovative, new-generation RWH treatment processes in UA practices. Despite a promising water source, harvested rainwater is challenged for crop irrigation owing to the presence of various contaminants (e.g., waterborne pathogens, potentially toxic metals and metalloids, and synthetic organic chemicals). While established RWH treatment processes (e.g., first flush diversion, sedimentation, solar disinfection, chlorination, UV irradiation, granular filtration, and bio-sand filtration) can remove certain pollutants, they cannot offer viable treatment solutions for UA irrigation due to different technical, economic, and social restrictions. Particularly, their capacity to reliably remove contaminants of emerging concern in runoff remains limited or uncertain. Consequently, it is essential to develop next-generation RWH treatment technologies tailored specifically for UA irrigation. To this end, three fundamental principles are recommended. First, the focus should be on technically viable, low-cost, simple-operation, and easy-maintenance treatment technologies capable of simultaneously addressing traditional and emerging runoff contaminants, while minimizing the production of undesirable treatment byproducts. Second, advancing the understanding of the water, soil, and crop interactions enables the development of "right" RWH treatment processes for irrigation of "right" crops at a "right" place. Last, crop nutrients, if possible, are retained in rainwater to reduce the nutrient demand for crop production. The insights and perspectives have far-reaching implications for water conservation, stormwater management, and the integration of water, food, and energy systems within the urban environment.

Rainwater extracting characteristics and its potential impact on DBPs generation: A case study

Frequent extreme precipitation events due to global warming can lead to large amounts of pollutants entering source water bodies via surface runoff and wet deposition, thus posing a threat to water supply security. In order to better understand the source characteristics and leaching mechanisms of rainwater dissolved organic matter (DOM), as well as its disinfection by-products formation potential (DBPsFP) during disinfection processes, rainwater samples were collected and extracting experiments were conducted. Three components were identified in rainwater through Parallel factor (PARAFAC) analysis, which were microbial humic-like component C1 (63.1 %), protein (tryptophan-like) component C2 (28.9 %), marine or terrestrial humic-like component C3 (8.1 %). The average molecular weight of rainwater fractions was ordered: hydrophobic neutral (HON) < hydrophobic bases (HOB) < hydrophobic acidic (HOA) < hydrophilic (HIS). The HOA and HON fractions of rainwater were the dominant precursors of trihalomethanes (THMs), while the rainwater HON fraction and hydrophilic fraction were the main precursor of haloacetic acids (HAAs) and trihloroacetonitrile (TCAN), respectively. Subsoil extracts had a higher concentration of dissolved organic carbon (DOC) and total dissolved nitrogen (TDN) than topsoil extracts. Partial least squares path modeling (PLS-PM) demonstrated that the extraction temperature was the dominant factor affecting the abundance of DOM in the topsoil extracts (R2 = 0.28), while the extraction time accounted more for the abundance of fluorescence substance and physicochemical indices in the subsoil extracts (R2 = 0.23 and 0.32, respectively). These results provide key information for controlling the impacts of global warming, in particular the risk of water sources being heavily contaminated by request rainfalls.

Fluorescence spectroscopy in the detection and management of disinfection by-product precursors in drinking water treatment processes: A review

Monitoring and prevention of the formation of disinfection by-products (DBPs) is paramount in drinking water treatment plants (DWTP) to ensure human health safety. This review provides an overview of how fluorescence techniques are developed to predict DBP formation and to evaluate the reduction of fluorescence components and DBPs following individual DWTP processes. Evidence has shown that common DBPs, nitrogenous DBPs and specific emerging DBPs exhibit positive linear relationships with terrestrial, anthropogenic, tryptophan-like, and eutrophic humic-like fluorescence. Due to the interrelationships of both regulated and emerging DBP types with fluorescence components, the limitations arise when attempting to predict emerging DBPs solely through linear relationships. Monitoring the reduction of DBP precursors after each treatment process can be achieved by studying the relationship between fluorescence components and DBPs. During the coagulation process, highest reduction rates are observed for terrestrial humic-like fluorescence. Advanced treatments such as granular, powdered, silver-impregnated activated carbon, magnetic ion exchange resins, and reverse osmosis, have revealed a significant reduction of fluorescent DBP precursors, ranging from 53% to 100%. During chlorination, the reduction rate follows the order: terrestrial humic-like > microbial humic-like > protein/tryptophan-like fluorescence. This review provides insights into the reduction of fluorescence signatures following individual DWTP processes, which offers information regarding DBP formation. These insights could assist in optimizing the treatment process to more effectively manage DBP formation. For the identification of emerging DBP generation, the utilization of advanced models is imperative to precisely predict emerging DBPs and to more accurately trace DBP precursors within DWTPs.

Disinfection by-product precursors introduced by sandstorm events: Composition, formation characteristics and potential risks

Sandstorms, a natural meteorological event, occur repeatedly during the dry season and can accumulate large amounts of natural/anthropogenic pollutants during the deposition process, potentially introducing disinfection by-product (DBP) precursors into surface waters. In this study, the characteristics of sandstorm-derived dissolved organic matter (DOM) and its DBP formation potential were elucidated. Overall, sandstorm-derived DOM mainly consisted of low-molecular-weight, low-aromaticity, high-nitrogen organic matter, with a dissolved organic carbon (DOC) release yield of 14.4 mg-DOC/g. The halogenated DBP formation potential (calculated as total organic halogen) of sandstorm-derived DOM was comparable to that of surface water, while the normalized DBP-associated toxicity was 1.96 times higher. Similar to DOM introduced by other depositional pathways, sandstorm-derived DOM also had higher yields of highly cytotoxic DBPs (haloacetaldehydes [HALs], haloacetonitriles [HANs] and halonitromethanes [HNMs]). The average atmospheric deposition flux for DOM during the sandstorm event (50.4 ± 2.1 kg km-2 day-1) was 6.95 times higher than that of dry deposition, indicating a higher probability of contaminant input. Simultaneously, the estimation revealed that the sandstorm will increase the formation potential of toxicity forcing agents, such as HALs, HANs and HNMs, in surface water by 3.87%, 2.39% and 9.04%, respectively. Considering the high frequency of sandstorm events and the sorption of other organic pollutants by sand and dust, the impact of sandstorms on surface water quality should be of concern.

Inactivation and genome damage of rotavirus and a human norovirus surrogate by monochloramine treatment and sequential application with UV

The inactivation efficacy by monochloramine for disinfecting gastroenteritis-causing rotaviruses (RV) and Tulane viruses (TV), a surrogate for noroviruses, were evaluated in this study. In addition, the strategies for improving the disinfection efficiency of monochloramine by raising the temperature and sequentially implementing UV irradiation were investigated. The results showed that monochloramine was more effective in the inactivation of TV than RV. Additionally, the inactivation rate constants of RV and TV by monochloramine at 35 °C were improved approximately by 46% and 100%, respectively, compared to those at 25 °C. Moreover, applying UV irradiation before monochloramine enhanced the inactivation efficacy of RV and TV by 63% and 72% compared to monochloramine alone (UV: 6 mJ/cm², NH₂Cl: 60 ppm × min). Furthermore, the synergistic effect was observed during the RV inactivation by the sequential process. Especially, higher than 0.5 log₁₀ reductions of RV VP1 genome contributed to the synergistic effect in sequential treatment, while less than 0.1 log₁₀ reductions of RV VP1 genome were observed during UV alone (13 mJ/cm²) or monochloramine alone (94 ppm × min). The genome damage might be the primary mechanism of generating synergy in sequential treatment for the inactivation of RV. By comparison, no synergistic effect was discovered for the inactivation of TV due to high susceptibility to monochloramine and UV. The findings on the inactivation efficacy and mechanism for improvement will contribute to a wide application of monochloramine for virus inactivation in water treatment and distribution systems.

Control of disinfection byproducts in drinking water treatment plants: Insight into activated carbon filter

The removal efficiencies of disinfection byproducts formation potentials (DBPFPs) and generated DBPs under pre-chlorination condition (pre-generated DBPs) during different drinking water treatment trains in eight full-scale drinking water treatment plants (WTPs) were investigated through field and laboratory studies. Haloacetic acids (HAAs) and haloacetonitriles (HANs) were identified to be two representative DBPs based on cytotoxicity and genotoxicity assessments. The performances of advanced treatment train for HAAs and HANs were better than that of conventional treatment train. However, the efficacy of ozone - biological activated carbon (O₃-BAC) was affected by its service time and position in the water treatment process. In addition, the consumption of free chlorine by activated carbon in old granular activated carbon (GAC) filter was higher than that in new one under pre-chlorination condition, resulting in the increase of HAAs and HANs in the GAC filter effluent. This demonstrated that the organic matter adsorbed on older activated carbon generated more HAAs and HANs during pre-chlorination, which inhibited the adsorption of pre-generated DBPs. The ability of GAC/O₃-BAC to remove HAAs and HANs was consistent with that of protein-like and low molecular weight organic substances, which could predict the performance of GAC and O₃-BAC in treating DBPs.

Enhanced coagulation for mitigation of disinfection by-product precursors: A review

The unintended formation of disinfection by-products (DBPs) has received considerable attention as it may pose risks to human health. Coagulation is the most common process for removing particulates as well as dissolved organic matter (DOM) (i.e., DBP precursors) during drinking water and wastewater treatments. With the improvement of water quality standards and the increased fluctuation in source water quality, conventional coagulation becomes challenging. Thus, significant efforts have been made to enhance coagulation to promote the removal of DOM in source water and mitigate the formation of DBPs in drinking water. This review provides a brief summary of the properties of DBP precursors and summarizes the effectiveness of enhanced coagulation involving three types of coagulants (metal-based coagulants, organic polymers, and organic-inorganic hybrid coagulants) in controlling the formation of DBPs during chlor(am)ination disinfection. Metal-based coagulants can achieve a reduction in DBP formation potential of approximately 20%-60% in natural water under enhanced coagulation conditions. Both the organic polymers (used as coagulant aids) and novel hybrid coagulants increase the removal of DOM and exhibit high potential for mitigating DBP formation. In addition, integrated treatments combining coagulation with other treatment processes (e.g., oxidation, membrane filtration, ion exchange, and adsorption) to enhance DBP precursor removal are evaluated in terms of performance, mechanisms, and features. Advanced treatments, such as membrane filtration and activated carbon adsorption, are effective coagulation-assisted processes, and can further control chlorinated DBPs; however, the elevated formation of bromate or highly brominated DBPs is of particular concern.

Removal of disinfection by-product precursors in drinking water treatment processes: Is fluorescence parallel factor analysis a promising indicator?

This work investigated the removal efficiency of disinfection by-product (DBP) precursors by different drinking water treatment processes and evaluated the feasibility of using fluorescence components removal as an indicator. A four-component (including tryptophan-like, protein-bound, tyrosine-like, and humic-like components) parallel factor analysis model was developed basing on 288 fluorescence excitation-emission matrices. Among all treatment processes, coagulation-sedimentation process showed the best performance, with mean removal ratios of 30% in total fluorescence intensity and 31% in total formation potential (FP) of DBPs, respectively. It preferentially removed humic-like component C4 (43%). Advanced treatment processes were less effective in comparison. Ozone and biological activated carbon (BAC) combined process reduced 20% of total fluorescence intensity, while ultrafiltration process reduced < 3%. Ozonation and BAC filtration preferentially removed free amino acids (i.e., C1 and C3) and protein-bound (i.e., C2) components, with mean removal ratios of 12% and 17%, respectively. Significant correlations (p < 0.01, double-tailed) were observed between four fluorescence components removal and FPs reduction of three trihalomethanes, dichloroacetonitrile (DCAN), and 1,1-dichloropropanone (1,1-DCP). Specifically, the correlation coefficients for three trihalomethanes and 1,1-DCP followed the order of C4 > C1 > C2 > C3, while the order for DCAN was C2 > C4 > C1 > C3.

Effect of oxidation ditch and anaerobic-anoxic-oxic processes on CX3R-type disinfection by-product formation during wastewater treatment

The high chlorine dosages in wastewater treatment plants during the COVID-19 pandemic may result in increased formation of disinfection by-products (DBPs), posing great threat to the aquatic ecosystem of the receiving water body and the public health in the downstream area. However, limited information is available on the effect of biological wastewater treatment processes on the formation of CX₃R-type DBPs. This study investigated the effect of oxidation ditch (OD) and anaerobic-anoxic-oxic (AAO), two widely used biological wastewater treatment processes, on the formation of five classes of CX₃R-type DBPs, including trihalomethanes (THMs), haloacetic acids (HAAs), haloacetaldehydes (HALs), haloacetonitriles (HANs) and halonitromethanes (HNMs), during chlorination. Experimental results showed that biological treatment effectively reduced the dissolved organic carbon (DOC) and UV₂₅₄, while it increased the dissolved organic nitrogen (DON), and therefore the ratio of DON/DOC. In addition, increases in the contents of soluble microbial product- and humic acid-like matters, and the transformation of high molecular weight (MW) fractions in the dissolved organic matter into low MW fractions were observed after OD and AAO processes. Although biological treatment effectively decreased the formation of Cl-THMs, Cl-HAAs, Cl-HANs and Cl-HNMs, the formation of DBCM, DBAA, BDCAA, DBCAA, DCAL, TCAL and DBAN (where C = chloro, B = bromo, D = di, T = tri) all increased significantly, due to the increased formation reactivity. Moreover, biological treatment increased the ratio of bromide/DOC and bromine incorporation into THMs, HAAs and DHANs except for HALs and THANs. Different from previous studies, this study revealed that biological treatment increased the formation of some DBPs, especially brominated DBPs, despite the efficient removal of organic matters. It provides insights into the DBP risk control in wastewater treatment, particularly during the COVID-19 pandemic.

Cancer risk assessment from exposure to trihalomethanes in showers by inhalation

In many countries water disinfection for human consumption is still carried out via chlorination which generates by-products such as trihalomethanes (THM). Exposure to THM constitutes a public health risk as such substances are known to be carcinogenic. This study evaluated exposure to THMs by inhalation in showers and assessed the carcinogenic risk for lifetime exposure. The study population involved students at Universidad de los Andes residing in Bogotá, Colombia. The risk assessment was performed stochastically and the exposure parameters were taken as probability distributions. Most variables were measured in relation to the chosen population. The risk was calculated using two different methodologies but no significant variations were obtained. The average risk calculated for men and women was 56 cases in a million (5.6 × 10^-5). A sensitivity analysis was carried out where it was found that the parameters that increase risk the most are the concentration of chloroform in the water, exposure time, and the volume of the shower cubicle.

Occurrence and Distribution of Disinfection Byproducts in Domestic Wastewater Effluent, Tap Water, and Surface Water during the SARS-CoV-2 Pandemic in China

Intensified efforts to curb transmission of the Severe Acute Respiratory Syndrome Coronavirus-2 might lead to an elevated concentration of disinfectants in domestic wastewater and drinking water in China, possibly resulting in the generation of numerous toxic disinfection byproducts (DBPs). In this study, the occurrence and distribution of five categories of DBPs, including six trihalomethanes (THMs), nine haloacetic acids (HAAs), two haloketones, nine nitrosamines, and nine aromatic halogenated DBPs, in domestic wastewater effluent, tap water, and surface water were investigated. The results showed that the total concentration level of measured DBPs in wastewater effluents (78.3 μg/L) was higher than that in tap water (56.0 μg/L, p = 0.05), followed by surface water (8.0 μg/L, p < 0.01). Moreover, HAAs and THMs were the two most dominant categories of DBPs in wastewater effluents, tap water, and surface water, accounting for >90%, respectively. Out of the regulated DBPs, none of the wastewater effluents and tap water samples exceeded the corresponding maximum guideline values of chloroform (300 μg/L), THM4 (80 μg/L), NDMA (100 ng/L), and only 2 of 35 tap water samples (67.6 and 63.3 μg/L) exceeded the HAA5 (60 μg/L) safe limit. HAAs in wastewater effluents showed higher values of risk quotient for green algae. This study illustrates that the elevated use of disinfectants within the guidance ranges during water disinfection did not result in a significant increase in the concentration of DBPs.