MOFs-derived conductive structure for high-performance removal/release of phosphate as electrode material

Municipal sludge biochar skeletal sodium alginate beads for phosphate removal

A novel Fe/La decorative biochar filled in sodium alginate beads (SA-KBC-Fe/La) was prepared by a simple sol-gel method and applied to adsorb phosphate (P) efficiently from water in this study. The morphology, structure and chemical component of the hydrogel beads were characterized in detail. And the synthesized bead exhibited easy separation and high P uptake of 46.65 mg/g when the Fe: La was of 1: 2 at 298 K with initial P of 100 mg/L, which was much higher than SA gel bead. The adsorption showed that the optimal pH was 6, and the adsorption was met with pseudo-second-order kinetics and Langmuir isothermal models, indicating a chemical adsorption process. The adsorption capacity remained 82 % after 5 cycles of adsorption. The adsorption mechanism of P was mainly of ligand exchange and electrostatic attraction. Compared with other reported adsorbents, the modification of Fe/La could enhance the mechanical property of SA-KBC-Fe/La beads with increasing active sites. Additionally, the involved biochar could lead to excellent thermal stability and hierarchical porous structure of beads with larger specific surface area (54.22 m2/g). The study could provide new ideas for P removal and strategy for the final disposal of municipal sludge.

Phosphorus removal from water by the metal-organic frameworks (MOFs)-based adsorbents: A review for structure, mechanism, and current progress

Efficacious phosphate removal is essential for mitigating eutrophication in aquatic ecosystems and complying with increasingly stringent phosphate emission regulations. Chemical adsorption, characterized by simplicity, prominent treatment efficiency, and convenient recovery, is extensively employed for profound phosphorus removal. Metal-organic frameworks (MOFs)-derived metal/carbon composites, surpassing the limitations of separate components, exhibit synergistic effects, rendering them tremendously promising for environmental remediation. This comprehensive review systematically summarizes MOFs-based materials' properties and their structure-property relationships tailored for phosphate adsorption, thereby enhancing specificity towards phosphate. Furthermore, it elucidates the primary mechanisms influencing phosphate adsorption by MOFs-based composites. Additionally, the review introduces strategies for designing and synthesizing efficacious phosphorus capture and regeneration materials. Lastly, it discusses and illuminates future research challenges and prospects in this field. This summary provides novel insights for future research on superlative MOFs-based adsorbents for phosphate removal.

Unlocking Bimetallic Active Centers via Heterostructure Engineering for Exceptional Phosphate Electrosorption: Internal Electric Field-Induced Electronic Structure Reconstruction

Development of electrode materials exhibiting exceptional phosphate removal performance represents a promising strategy to mitigate eutrophication and meet ever-stricter stringent emission standards. Herein, we precisely designed a novel LaCeOx heterostructure-decorated hierarchical carbon composite (L8C2PC) for high-efficiency phosphate electrosorption. This approach establishes an internal electric field within the LaCeOx heterostructure, where the electrons transfer from Ce atoms to neighboring La atoms through superexchange interactions in La-O-Ce coordination units. The modulatory heterostructure endows a positive shift of the d band of La sites and the increase of electron density at Fermi level, promoting stronger orbital overlap and binding interactions. The introduction of oxygen vacancies during the in situ nucleation process reduces the kinetic barrier for phosphate-ion migration and supplies additional active centers. Moreover, the hierarchical carbon framework ensures electrical double-layer capacitance for phosphate storage and interconnected ion migration channels. Such synergistically multiple active centers grant the L8C2PC electrode with high-efficiency record in phosphate electrosorption. As expected, the L8C2PC electrode demonstrates the highest removal capability among the reported electrode materials with a saturation capacity of 401.31 mg P g-1 and a dynamic capacity of 91.83 mg P g-1 at 1.2 V. This electrochemical system also performs well in the dephosphorization in natural water samples with low concentration that enable effluent concentration to meet the first-class discharge standard for China (0.5 mg P L-1). This study advances efficient dephosphorization techniques to a new level and offers a deep understanding of the internal electric field that regulates metal orbitals and electron densities in heterostructure engineering.

Combining emulsion electrospinning with surface functionalization to fabricate multistructural PLA/CS@ZIF-8 nanofiber membranes toward pH-responsive dual drug delivery

Developing of the multifunctional polymeric carrier for controlled drug release is still one of most challenging task. In this work, a pH-responsive dual drug delivery system was designed and prepared based on the zeolitic imidazolate framework-8 (ZIF-8). The poly(lactic acid)/chitosan (PLA/CS) core-shell nanofiber membranes by emulsion electrospinning, which the hydrophilic drug (Astragalus Polysacharin, APS) was encapsulated in the CS core and the hydrophobic drug (Camptothecin, CPT) was loaded into the PLA shell, respectively. Subsequently, ZIF-8 nanoparticles served as the protective layer were immobilized on the surface of PLA/CS to form multi-structural PLA/CS@ZIF-8 nanofiber membranes. In vitro drug release of nanofiber membranes were studied in the acidic and neutral medium, respectively. The results were that the hydrophilicity and surface roughness of nanofiber membranes rose with increasing of 2-MIM concentrations. The nanofiber membranes also had excellent pH-responsive and controlled release property. Furthermore, the drug release of PLA/CS@ZIF-8 for either APS or CPT were all carried out in a coexisting manner of diffusion and skeleton corrosion. In addition, in vitro cytotoxicity assay indicated nanofiber membranes with good cytocompatibility. Therefore, the multi-structured PLA/CS@ZIF-8 nanofiber membranes has been used as a potential pH-responsive dual drug release system.

Emerging electro-driven technologies for phosphorus enrichment and recovery from wastewater: A review

The recovery of phosphorus from wastewater is a critical step in addressing the scarcity of phosphorus resources. Electro-driven technologies for phosphorus enrichment have gathered significant attention due to their inherent advantages, such as mild operating conditions, absence of secondary pollution, and potential integration with other technologies. This study presents a comprehensive review of recent advancements in the field of phosphorus enrichment, with a specific focus on capacitive deionization and electrodialysis technologies. It highlights the underlying principles and effectiveness of electro-driven techniques for phosphorus enrichment while systematically comparing energy consumption, enrichment rate, and concentration factor among different technologies. Furthermore, the study provides a thorough analysis of the capacity of various technologies to selectively enrich phosphorus and proposes several methods and strategies to enhance selectivity. These insights offer valuable guidance for advancing the future development of electrochemical techniques with enhanced efficiency and effectiveness in phosphorus enrichment from wastewater.

Phosphate adsorption by metal organic frameworks: Insights from a systematic review, meta-analysis, and predictive modelling with artificial neural networks

This comprehensive study analysed 55 articles published between 2011 and 2022 on the use of metal organic frameworks (MOFs) for phosphate adsorption. The study found that the performance of MOFs in phosphate adsorption is influenced by various factors such as the type of MOF, synthesis method, modification/alteration, and operational conditions (initial concentration, adsorbent dose, pH, contact time, and temperature). Most of the MOFs have a wide range of theoretical maximum adsorption capacity for phosphate, but their long-term use in phosphorus recovery may be limited due to the adsorption mechanisms being dominated by inner sphere complexation. The study employed machine learning to construct artificial neural network (ANN) models for predicting phosphate adsorption capacity based on input features from operation and synthesis procedures. The initial phosphate concentration was the most important input from the operational features, while the modulator agent was consistently relevant during MOF synthesis. The models showed strong fitting for most MOF types recorded for the study, such as UIO-66, MIL-100, ZIF-8, Al-MOFs, La-MOFs, and Ce-MOFs. Overall, this study provides valuable insights for the design of MOF adsorbents for phosphate adsorption and offers guidance for future research in this area.

Multifunctional Roles of Dihydrotetrazine-Decorated Zr-MOFs in Photoluminescence and Colorimetrism for Discrimination of Arsenate and Phosphate Ions in Water

The high chemical and structural stabilities of zirconium (Zr)-based metal-organic frameworks (MOFs) in aquatic media make them ideal candidates for wastewater treatment. Rational decoration or Zr-MOFs with functional groups can significantly extend their application in this area. In this work, two well-known Zr-MOFs, UiO-66 and MIL-140-A, were functionalized with dihydrotetrazine function to increase their capability in water treatment. Investigations reveal that these two dihydrotetrazine (DHTZ)-functionalized MOFs, namely UiO-66(Zr)-DHTZ and MIL-140(Zr)-DHTZ, can be applied as a two-component array for highly selective and sensitive discrimination of arsenate (AsO43-) and phosphate (PO43-) ions in water in the presence of other anions. Photoluminescence (PL) tests using UiO-66(Zr)-DHTZ show that this MOF can detect these two anions via a ratiometric response, 1.74 for arsenate and 1.84 for phosphate at 2 μM, with superior detection limits (7.2 × 10-8 M for AsO43- and 4.3 × 10-8 M for PO43-). The ratiometric PL response of UiO-66(Zr)-DHTZ toward arsenate and phosphate anions arises possibly from the arsenate-dihydrotetrazine hydrogen bonding. In the next step, colorimetric tests using MIL-140(Zr)-DHTZ were conducted to discriminate the arsenate from phosphate with a very low detection limit at nanomolar level. This MOF undergoes a yellow-to-pink color change in the presence of arsenate ions, while no color change is observed in the presence of phosphate. This color change is observed through conversion of dihydrotetrazine sites inside the pores of MIL-140(Zr)-DHTZ into tetrazine. Altogether, the PL response of UiO-66(Zr)-DHTZ is originated from the hydrogen bond-donating/accepting character of DHTZ function, while the colorimetric response of MIL-140(Zr)-DHTZ is based on the chemical conversion of DHTZ function. This work clearly shows that the decoration of Zr-based MOFs with multicharacter functional groups can develop their application in wastewater treatment as multipurpose platforms.

The Defects, Physicochemical Properties, and Surface Charge of MIL-88A (Al) Crystal Were Regulated for Highly Efficient Removal of Anionic Dyes: Preparation, Characterization, and Adsorption Mechanism

In this paper, the physicochemical properties, surface charge, and crystal defects of MIL-88A (Al) were controlled by adjusting the ratio of metal ligands and temperature in the synthetic system without the addition of surfactants. The adsorption properties of different crystals for Congo red (CR) were studied. Among them, MIL-88A (Al)-130 and MIL-88A (Al)-d have the best adsorption properties. The maximum adsorption capacities are 600.8 and 1167 mg · g^-1, respectively. Compared with MIL-88A (Al)-130, the adsorption performance of MIL-88A (Al)-d was increased by 94.2%, and the adsorption rate was increased by about 4 times. It can be seen that increasing the proportion of metal ligands within a certain range will improve the adsorption capacity. The structure and morphology of the adsorbent were characterized by XRD, FTIR, SEM, EDS, TGA, BET, and zeta potential. The effects of time, temperature, pH, initial solution concentration, and dosage on CR adsorption properties were systematically discussed. The pseudo-second-order kinetic model and Langmuir isothermal model can well describe the adsorption process, which indicates that the adsorption process is a single-layer chemisorption occurring on a uniform surface. According to thermodynamics, this adsorption is an endothermic process. The mechanism of CR removal is proposed as the electrostatic attraction, hydrogen bond, metal coordination effect, π-π conjugation, crystal defect, and pore-filling effect. In addition, MIL-88A (Al)-d has good repeatability, indicating that it is a good material for treating anionic dye wastewater.

Enhanced phosphorus electrosorption using Fe, N-co-doped porous electrode via capacitive deionization

Excessive phosphorus discharge causes water eutrophication and disturbs the homeostasis of aquatic ecosystems. Capacitive deionization (CDI) has been proven to be a more energy-efficient and environmentally friendly technology for removing phosphorus. Raw carbon (Raw C) electrodes are widely used in CDI. However, the phosphorus removal capacity of most unmodified Raw C still needs to be enhanced. Therefore, the Fe, N-co-doped carbon prepared in this study was expected to further improve the phosphorus removal performance. Herein, the optimal electrode with 5% Fe (FeNC) had an approximately 2.7 times higher adsorption capacity than Raw C. At a low concentration (5 mg P/L), FeNC exhibited a high maximum removal capacity of 4.28 mg P/g. Under reversed voltage, the phosphorus was easily desorbed by deionized water. Ion competition studies showed that coexisting ions adversely affected phosphorus adsorption onto FeNC in the order SO₄^2- > NO₃^- > Cl^-. Furthermore, the energy consumption of FeNC was calculated to be as low as 0.0069 kWh/g P and 0.023 kWh/m³ water under 1.2 V. More importantly, phosphorus removal by FeNC during CDI was demonstrated in simulated natural water from the Jinjiang River (Chengdu, China). This study indicated that FeNC is expected to be a potential electrode for CDI dephosphorization.

"Blockchain-Like" MIL-101(Cr)/Carbon Black Electrodes for Unprecedented Defluorination by Capacitive Deionization

Metal-organic frameworks (MOF) have attracted extensive attention due to their ultra-high specific surface area and tunable structure, the mechanism of direct utilization for capacitive deionization (CDI) defluorination remains undefined. Here, MIL-101(Cr) with ultra-high specific surface area, high water stability, and open metal sites (OMSs) is prepared by a hydrothermal method for defluorination of CDI. Carbon black is used as a "chain" to connect F-stored in the holes of MIL-101(Cr) (Cr-MOF)as "blocks" to enhance the conductivity and ion storage capacity of MIL-101(Cr)/carbon black electrodes (Cr-MOF electrodes). This simple construction method avoids the process complexity of in situ synthesis and performs better. These easily constructed "blockchain-like" Cr-MOF electrodes exhibit excellent defluorination capacity (39.84 mg_NaF g_electrodes ^-1 ), low energy consumption (1.2 kWh kg_NaF ^-1 ), and good stability. The coupling of the electrochemical redox reaction of Cr³⁺ /Cr⁴⁺ with confined water is investigated using in situ and ex situ analysis methods combined with density functional theory (DFT), resulting in an unprecedented defluorination mechanism for Cr-MOF electrodes. This study opens up new ideas for the application of MOF in CDI, clarifies the removal mechanism of MOF, and lays a foundation for further promoting the application of raw materials with poor conductivity in the field of CDI.

Constructing 3D flower-like LaFe bimetal oxides with abundant mesoporous and controllable active sites for high-efficient phosphorus removal: Synthesis, mechanism, and application

The design of high-performance porous adsorbents for phosphorus removal is a persistently hot topic to maintain a sustainable aquatic ecosystem. In the present study, a self-templating strategy using LaFe cyanometallates (CMs) as precursors was adopted to prepare porous LaFe bimetal oxides with optimizable structure and composition for phosphate adsorption. The results showed that a high supplied La^III/Fe^II ratio enabled an adequate coordination polymerization in the preparation of LaFe CM precursor and led to a striking three-dimensional (3D) structure of "twin lotus flower" with high coordinated water content, which resulted in a 3D flower-like LaFe oxide with high surface area and high porosity (mainly in mesopore). The LaFe oxide of LaFe15T possessing the optimal La/Fe ratio (1.5: 1) exhibited the most superior performance of phosphate adsorption, where La was confirmed to be the main active site for phosphate capture via ligand exchange mechanism. The batch and column tests of phosphate adsorption showed that the 3D flower-like LaFe oxides are effective adsorbents for phosphate removal. Therefore, the structure optimization in the template preparation stage is an effective strategy to design porous LaFe bimetal oxides as high-performance phosphorus removal materials.

Degradation of lomefloxacin by MoS2/MIL-53(Fe, Cu) catalyst in heterogeneous electro-Fenton process

A novel heterogeneous catalyst named MoS₂/MIL-53(Fe, Cu) (MMFC) was prepared by hydrothermal method and applied in a heterogeneous electro-Fenton (hetero-EF) system for lomefloxacin (LOM) degradation in this work. Under the optimal conditions of current density 3 mA/cm², catalyst dosage 0.100 g/L, and initial pH 6, 93.5% LOM (2 mg/L) removal efficiency was achieved in the MMFC hetero-EF system within 60 min, indicating an obvious improvement compared with the MIL-53(Fe, Cu) hetero-EF system. The good catalytic activity was attributed to more effective active sites of the catalyst and the conversion of Fe(II)/Fe(III) and Cu(I)/Cu(II) promoted by Mo(IV) in MoS₂, which could be inferred by scanning electron microscopy (SEM), transmission electron microscopy (TEM), and X-ray photoelectron spectroscopy (XPS) characterizations. The reusability and stability of MMFC were explored based on five cyclic experiments, and the average degradation efficiency reached 73.9%. Furthermore, the hetero-EF system could achieve the total removal of moxifloxacin and tetracycline within 6 min and 40 min, respectively. Quenching experiments revealed that the hydroxyl radicals (·OH) were the main reactive radicals while superoxide radicals (·O₂^-) and singlet oxygen (¹O₂) played a certain part in LOM degradation. Finally, the possible mechanism of the hetero-EF process and LOM degradation pathways were proposed, including substitution, elimination, and cleavage of ring structures. Accounting for good catalytic performance, low preparation cost, and satisfactory versatility, the MMFC exhibited good potential to work as a hetero-EF catalyst for wastewater treatment.

Electrified nanohybrid filter for enhanced phosphorus removal from water

Phosphorus (P) has been identified as a major cause of eutrophication. One feasible way to deal with P-containing wastewater is to employ advanced adsorbents with high P affinity. Towards this end, the loading of these sorbents onto a conductive scaffold would facilitate the introduction of an electric field into the reaction system thereby permitting a continuous-flow operation and improved P sorption kinetics. Here, the preparation and evaluation of an electroactive carbon nanotube (CNT) filter functionalized with cerium-based metal organic frameworks (Ce-MOF) is reported. Various advanced characterization techniques confirmed the successful fabrication of the Ce-MOF/CNT nanohybrid filter. The results suggested that the nanohybrid filter had a maximum P adsorption capacity of 22.41 mg g^-1, which compared favorably with other state-of-the-art P sorbents. Ce-MOF loading, applied voltage and flow rate each increased the rate constants for phosphate removal by factors of 1.6, 2.1 and 5.8 times relative to the absent states. The underlying P sorption mechanisms involved outer-sphere surface complexation (electrostatic attraction), inner-sphere surface complexation (Ce-O-P) and diffusion. The performance was tolerant of a wide operational pH range and different water matrices. The Ce-MOF/CNT electrochemical filter described in this study provides a viable strategy to address the challenging issues associated with aqueous P pollution.

Defective MOFs-based electrocatalytic self-cleaning membrane for wastewater reclamation: Enhanced antibiotics removal, membrane fouling control and mechanisms

In order to resolve the poor antibiotics rejection and serious fouling of ultrafiltration (UF) membrane during municipal wastewater reclamation, a novel anodic membrane (defective UiO-66 (D-UiO-66)/Graphite/Polyvinylidene fluoride (PVDF)) with high pure water flux (596.1 L•h ^- 1•m ^- 2•bar^-1) was fabricated by incorporating defective zirconium based metal-organic framework (D-UiO-66) and conductive graphite particles into PVDF matrix and applied in the coupling of electro-oxidation and membrane filtration process. Compared to the other anodic membranes (i.e., Graphite/PVDF and UiO-66/Graphite/PVDF), D-UiO-66/Graphite/PVDF possesses superior anti-fouling and self-cleaning abilities (flux recovery=100%, model foulant: bovine serum albumin) in both intermittent and continuous supply of electric field under current density of 0.01 mA/cm²; moreover, efficient antibiotics (tetracycline, norfloxacin, tylosin and sulfamethoxazole) removal (> 96.6%) and bactericidal efficiency against E. coli and S. aureus (100%) were achieved simultaneously without the addition of chemical reagents due to the higher electrocatalytic activity of anodic membrane for oxidation of pollutants by •OH and •O₂^- free radicals. Three degradation pathways of antibiotics were proposed and the self-cleaning mechanism of membrane was dominated by the synergy of the partial mineralization and the reduced fouling potential of foulants after oxidation as revealed by the increase in hydrophilicity, and decrease in negative charge and molecular weight. The fabricated membrane also presents excellent electrochemical stability, separation and self-cleaning performance for treatment of municipal secondary effluent during long-term filtration with low electric energy consumption, which is promising in wastewater reclamation.

Remediation of PO43− in Water Using Biodegradable Materials Embedded with Lanthanum Oxide Nanoparticles

Eutrophication, a process in which algae grow inordinately, adversely affects aqueous fauna. Phosphorous at levels above 0.1 mg/L is adequate to cause eutrophication. In this study, we aimed to reduce the amount of PO43− in water using biodegradable and ecofriendly sorbents. Lanthanum oxide nanoparticles were doped in agar and cellulose sponge to produce two new sorbents, agar–La and sponge–La, respectively. Both sorbents showed high efficacy in remediating up to 10 mg/L PO43− in water. Sponge–La was found to be more proficient in terms of adsorption than agar–La because it required just 1 h to achieve 80% adsorption when the initial concentration of PO43− was 10 mg/L. Sponge–La was effective at pH levels ranging from 4 to 8, with a removal rate of 80–100%. Although agar–La displayed a slow sorption process, it presented a high adsorption capacity (156 mg/g); moreover, the cake-shaped agar–La could be easily manufactured and separated from an aqueous matrix or any water-based solutions. These two sorbents could effectively remove high concentrations of PO43−, and their preparation requires a simple step. Agar–La was easier to manufacture, whereas the adsorption process using sponge–La was more rapid. In addition, both sorbents can be easily separated from the matrix after sorption.

Structural insight into the alginate derived nano-La(OH)3/porous carbon composites for highly selective adsorption of phosphate

In this study, a novel nano-La(OH)₃/porous carbon composites derived from La alginate xerogel with egg-box structure had been successfully synthesized by a gradient heat treatment in nitrogen atmosphere. This facile fabrication strategy can be easily employed to considerably encapsulate La(OH)₃ nanoparticles uniformly into the porous carbon matrix derived from the alginate macromolecule framework. The optimized sample, labeled as LS-550(N), exhibited extremely high phosphate uptake and great selectivity. The adsorption kinetic process dramatically followed pseudo-second-order model. The Langmuir model fitted maximum equilibrium adsorption capacity is 133.58 mg·g^-1. The phosphate adsorption mechanisms could be consist of electrostatic interaction, complexation and ligand exchange interaction on the surface of LS-550(N). The prominent practical applicability of LS-550(N) in the regeneration test suggests that the LS-550(N) could be a potential adsorption candidate for the decontamination of phosphate-containing natural water bodies.

Research progress of metal organic frameworks and their derivatives for adsorption of anions in water: A review

Anion pollution in water has become a problem that cannot be ignored. The anion concentration should be controlled below the national emission standard to meet the demand for clean water. Among the methods for removing excess anions in water, the adsorption method has a unique removal performance, and the core of the adsorption method is the adsorbent. In recent years, the emerging metal-organic frameworks (MOFs) have the advantages of adjustable porosity, high specific surface area, diverse functions, and easy modification. They are very competitive in the field of adsorption of liquid anions. This article focuses on the adsorption of fluoride, arsenate, chromate, radioactive anions (ReO₄^-, TcO₄^-, SeO₄^2-/SeO₃^2-), phosphate ion, chloride ion, and other anions by MOFs and their derivatives. The preparation methods of MOFs are introduced in turn, the application of different types of metal-based MOFs to adsorb various anions were discussed in categories with their crystal structure and functional groups. The influence on the adsorption of anions is analyzed, including the more common and special adsorption mechanisms, adsorption kinetics and thermodynamics, and regeneration performance are briefly described. Finally, the current situation of MOFs adsorption of anions is summarized, and the outlook for future development is summarized to provide my own opinions for the practical application of MOFs.

Adsorption and convenient ELISA detection of sulfamethazine in milk based on MOFs pretreatment

Metal-organic frameworks (MOFs) has excellent adsorption performance, herein, three kinds of common MOFs were used for the adsorption of sulfamethazine (SM₂) in milk, then enzyme-linked immunosorbent assay (MOF-ELISA) was established. Firstly, NH₂-UiO-66, NH₂-MIL-101, and ZIF-8 were successfully prepared and their adsorption characteristics for SM₂ were investigated. The kinetic models of the three MOFs were more in line with the pseudo-second-order adsorption kinetics, and the saturated adsorption capacity of NH₂-UiO-66, NH₂-MIL-101, and ZIF-8 for SM₂ at 298 K were 139.64, 29.98, and 36.5 mg/g, respectively. Using three different MOFs as adsorbents, the pretreatment of milk samples could be completed within 1 h, the half inhibitory concentrations (IC₅₀) of MOF-ELISA were 1.26, 1.86 and 2.74 ng/mL, the limit of detections (LOD) were 0.05, 0.12, and 0.19 ng/mL and the recovery rate were from 82.30% to 105.62% with the intra-day coefficient of variations (CVs) below 5.81% and inter-day CVs below 7.21%. Detection results showed good correlations with LC-MS/MS (R² > 0.99), indicated that MOFs could effectively eliminate the interference of sample matrix, and has the potential to become a general pretreatment method for the detection of various matrices residues in food safety monitoring.