A modified flower pollen-based photothermocatalytic process for enhanced solar water disinfection: Photoelectric effect and bactericidal mechanisms

Green Electrosynthesis of Hydroxylamines via CuS Suppressing N─O Bond Cleavage

Organic hydroxylamines, pivotal intermediates in pharmaceutical and polymer chemistry, face persistent challenges in selective synthesis. Its main difficulty lies in the strong repulsion between the lone pair electrons on the N and O atoms, which makes their N─O bond easy to break, leading to a over-reduction to amine compounds. Here, we present a green electrocatalytic strategy for the first time that converts oximes to hydroxylamines over CuS. Specially, N-benzylhydroxylamine was achieved with 95% conversion and 80% selectivity from benzaldoxime at -0.9 V versus reversible hydrogen electrode. Mechanistic investigations reveal that CuS can optimize the adsorption energy of the reaction intermediates, making the N─O bond more difficult to cleave during the electrocatalytic hydrogenation, thus leading to a high selectivity formation of hydroxylamines. This methodology is successfully extended to other hydroxylamines and further enables the unprecedented synthesis of organic hydroxylamines from nitric oxide gas. Our work establishes a sustainable electrosynthetic platform for hydroxylamines synthesis without organic solvents and additional reduction agents, providing new insights for modern green chemical synthesis.

The development of multifunctional materials for water pollution remediation using pollen and sporopollenin

Pollen is a promising material for water treatment owing to its renewable nature, abundant sources, and vast reserves. The natural polymer sporopollenin, found within pollen exine, possesses a distinctive layered porous structure, mechanical strength, and stable chemical properties, which can be utilized to prepare sporopollenin exine capsules (SECs). Leveraging these attributes, pollen or SECs can be used to develop water pollution remediation materials. In this review, the structure of pollen is first introduced, followed by the categorization of various methods for extracting SECs. Then, the functional expansion of pollen adsorbents, with an emphasis on their recyclability, reusability, and visual sensing capabilities, as opposed to mere functional group modification, is discussed. Furthermore, the progress made in utilizing pollen as a biological template for synthesizing catalysts is summarized. Intriguingly, pollen can also be engineered into self-propelled micromotors, enhancing its potential application in adsorption and catalysis. Finally, the challenges associated with the application of pollen in water pollution treatment are discussed. These challenges include the selection of environmentally friendly, non-toxic reagents in synthesizing pollen water remediation products and the large-scale application after synthesis. Moreover, the multifunctional synthesis and application of different water remediation products are prospected.

Sunflower pollen-derived microcapsules adsorb light and bacteria for enhanced antimicrobial photothermal therapy

Bacterial infection is one of the most serious clinical complications, with life-threatening outcomes. Nature-inspired biomaterials offer appealing microscale and nanoscale architectures that are often hard to fabricate by traditional technologies. Inspired by the light-harvesting nature, we engineered sulfuric acid-treated sunflower sporopollenin exine-derived microcapsules (HSECs) to capture light and bacteria for antimicrobial photothermal therapy. Sulfuric acid-treated HSECs show a greatly enhanced photothermal performance and a strong bacteria-capturing ability against Gram-positive bacteria. This is attributed to the hierarchical micro/nanostructure and surface chemistry alteration of HSECs. To test the potential for clinical application, an in situ bacteria-capturing, near-infrared (NIR) light-triggered hydrogel made of HSECs and curdlan is applied in photothermal therapy for infected skin wounds. HSECs and curdlan suspension that spread on bacteria-infected skin wounds of mice first capture the local bacteria and then form hydrogels on the wound upon NIR light stimulation. The combination shows a superior antibacterial efficiency of 98.4% compared to NIR therapy alone and achieved a wound healing ratio of 89.4%. The current study suggests that the bacteria-capturing ability and photothermal properties make HSECs an excellent platform for the phototherapy of bacteria-infected diseases. Future work that can fully take advantage of the hierarchical micro/nanostructure of HSECs for multiple biomedical applications is highly promising and desirable.

Photocatalytic activity evaluation of polyvinylpyrrolidone K30 assisted synthesis of 1D oxygen-vacancy-rich Bi5O7BrxI1-x nanorod solid solution

The unique layered structure of bismuth halide oxide has led to an extensive application in the degradation of refractory antibiotics from water environments. With the aid of regulating the energy band structure of photocatalytic materials and equilibrating the response towards visible light and redox ability, a novel oxygen-vacancy-rich Bi5O7BrxI1-x nanorod solid solution was synthesized by polyvinylpyrrolidone K30 assisted solvothermal method, and its photocatalytic behavior was investigated for the degradation of antibiotic levofloxacin under visible light. The degradation rate of the optimal Bi5O7Br0.5I0.5 to levofloxacin can reach 82.7% within 30 min, which is 9.22 and 4.74 times higher than those of the monomers Bi5O7Br and Bi5O7I. The catalyst of Bi5O7Br0.5I0.5 shows 99.88% antibacterial activity against Escherichia coli. The efficient photocatalytic ability of the Bi5O7Br0.5I0.5 is resulted from the alteration of energy band structure and suppression of charge recombination due to benign changes in the electronic and crystal structures. Furthermore, both various characterizations and Density Functional Theory calculations reveal that a multitude of oxygen vacancies exist in the Bi5O7Br0.5I0.5. The photocatalytic degradation pathways were explored and the toxicity of the intermediates was also appraised. The present work provides a mild and feasible construction of solid solutions and introduction of oxygen vacancies to eliminate environmentally refractory organic pollutants with photocatalytic technology.

Unraveling Valence Electron Number Dependent Excitonic Effects over M1-N3C1 Sites in Single-Atom Catalysts

Excitonic effects significantly influence the selective generation of reactive oxygen species and photothermal conversion efficiency in photocatalytic reactions; however, the intrinsic factors governing excitonic effects remain elusive. Herein, a series of single-atom catalysts with well-defined M1-N3C1 (M = Mn, Fe, Co, and Ni) active sites are designed and synthesized to investigate the structure-activity relationship between photocatalytic materials and excitonic effects. Comprehensive characterization and theoretical calculations unveil that excitonic effects are positively correlated with the number of valence electrons in single metal atoms. The single Mn atom with 5.93 valence electrons exhibits the weakest excitonic effects, which dominate superoxide radical (O2•-) generation through charge transfer and enhance photothermal conversion efficiency. Conversely, the single Ni atom with 9.27 valence electrons exhibits the strongest excitonic effects, dominating singlet oxygen (1O2) generation via energy transfer while suppressing photothermal conversion efficiency. Based on the valence electron number dependent excitonic effects, a reaction environment with hyperthermia and abundant cytotoxic O2•- is designed, achieving efficient and stable water disinfection. This work reveals single metal atom dependent excitonic effects and presents an atomic-level methodology for catalytic application targeted reaction environment tailoring.

Carbonaceous Materials-Based Photothermal Process in Water Treatment: From Originals to Frontier Applications

The photothermal process has attracted considerable attention in water treatment due to its advantages of low energy consumption and high efficiency. In this respect, photothermal materials play a crucial role in the photothermal process. Particularly, carbonaceous materials have emerged as promising candidates for this process because of exceptional photothermal performance. While previous research on carbonaceous materials has primarily focused on photothermal evaporation and sterilization, there is now a growing interest in exploring the potential of photothermal effect-assisted advanced oxidation processes (AOPs). However, the underlying mechanism of the photothermal effect assisted by carbonaceous materials remains unclear. This review aims to provide a comprehensive review of the photothermal process of carbonaceous materials in water treatment. It begins by introducing the photothermal properties of carbonaceous materials, followed by a discussion on strategies for enhancing these properties. Then, the application of carbonaceous materials-based photothermal process for water treatment is summarized. This includes both direct photothermal processes such as photothermal evaporation and sterilization, as well as indirect photothermal processes that assisted AOPs. Meanwhile, various mechanisms assisted by the photothermal effect are summarized. Finally, the challenges and opportunities of using carbonaceous materials-based photothermal processes for water treatment are proposed.

Precisely Orientating Atomic Array in One-Dimension Tellurium Microneedles Enhances Intrinsic Piezoelectricity for an Efficient Piezo-Catalytic Sterilization

Comprehensively understanding the interdependency between the orientated atomic array and intrinsic piezoelectricity in one-dimension (1D) tellurium (Te) crystals will greatly benefit their practical piezo-catalytic applications. Herein, we successfully synthesized the various 1D Te microneedles by precisely orientating the atomic growth orientation by tuning (100)/(110) planes ratios (Te-0.6, Te-0.3, Te-0.4) to reveal the secrets of piezoelectricity. Explicitly, the theoretical simulations and experimental results have solidly validated that the Te-0.6 microneedle grown along the [110] orientation possesses a stronger asymmetric distribution of Te atoms array causing the enhanced dipole moment and in-plane polarization, which boosts a higher transfer and separation efficiency of the electron and hole pairs and a higher piezoelectric potential under the same stress. Additionally, the orientated atomic array along the [110] has p antibonding states with a higher energy level, resulting in a higher CB potential and a broadened band gap. Meanwhile, it also has a much lower barrier toward the valid adsorption of H₂O and O₂ molecules over other orientations, effectively conducive to the production of reactive oxygen species (ROS) for the efficient piezo-catalytic sterilization. Therefore, this study not only broadens the fundamental perspectives in understanding the intrinsic mechanism of piezoelectricity in 1D Te crystals but also provides a candidate 1D Te microneedle for practical piezo-catalytic applications.

Synthesis of Rape Pollen-Fe2O3 Biohybrid Catalyst and Its Application on Photocatalytic Degradation and Antibacterial Properties

The efficient biohybrid photocatalysts were prepared with different weight ratios of Fe2O3 and treated rape pollen (TRP). The synthesized samples were characterized by different analytical techniques. The results showed that carbonized rape pollen had a three-dimensional skeleton and granular Fe2O3 uniformly covered the surface of TRP. The Fe2O3/TRP samples were used for degradation of Methylene Blue (MB) and Escherichia Coli (E. coli) disinfection in water under visible light. The degradation of MB and inactivation of E. coli was achieved to 93.7% in 300 min and 99.14% in 100 min, respectively. We also explored the mechanism during the reaction process, where reactive oxygen species (ROS) including hydroxyl radicals and superoxide radicals play a major role throughout the reaction process. This work provides new ideas for the preparation of high-performance photocatalysts by combining semiconductors with earth-abundant biomaterials.

Uncovering novel disinfection mechanisms of solar light/periodate system: The dominance of singlet oxygen and metabolomic insights

Disinfection plays an essential role in waterborne pathogen control and disease prevention, especially during the COVID-19 pandemic. Catalyst-free solar light/periodate (PI) system has recently presented great potential in water disinfection, whereas the in-depth chemical and microbiological mechanisms for efficient bacterial inactivation remain unclear. Our work delineated firstly the critical role of singlet oxygen, instead of reported hydroxyl radicals and superoxide radicals, in dominating bacterial inactivation by the PI/simulated sunlight (SSL) system. Multi-evidence demonstrated the prominent disinfection performance of this system for Staphylococcus aureus in terms of culturability (> 6 logs CFU), cellular integrity, and metabolic activity. Particularly, the excellent intracellular DNA removal (> 95%) indicated that PI/SSL system may function as a selective disinfection strategy to diminish bacterial culturability without damaging the cell membrane. The PI/SSL system could also effectively inhibit bacterial regrowth for > 5 days and horizontal gene transfer between E. coli genera. Nontargeted metabolomic analysis suggested that PI/SSL system inactivated bacteria by triggering the accumulation of intracellular reactive oxygen species and the depletion of reduced glutathione. Additionally, the PI/SSL system could accomplish simultaneous micropollutant removal and bacterial inactivation, suggesting its versatility in water decontamination. Overall, this study deciphers more comprehensive antibacterial mechanisms of this environmentally friendly disinfection system, facilitating the technical development and application of the selective disinfection strategy in environmental pathogen control.

Pyro-photocatalytic Coupled Effect in Ferroelectric Bi0.5Na0.5TiO3 Nanoparticles for Enhanced Dye Degradation

Advanced oxidation processes (AOPs), achieved through the continuous attack of reactive oxygen species (ROS), are considered the most efficient way to mineralize organic pollutants. Among them, photocatalysis is the most environmentally friendly strategy for pollution mitigation but is hampered by low conversion efficiency. By exploiting the coupling effect without changing the properties of the semiconductor, the application of pyroelectric fields can significantly improve the catalytic performance. The degradation rate of rhodamine B by Bi_0.5Na_0.5TiO₃ (BNT) nanoparticles under temperature fluctuations and visible light irradiation was up to 98%. The performance was enhanced by 216.54% and 31.48% compared to the pyroelectric catalysis and photocatalysis alone, respectively. The improved performance is due to the introduced pyroelectric potential with the imposition of temperature fluctuations, which can make the domains enhance the polarization of ferroelectrics, thus promoting the charge separation. This method can significantly advance the coupled pyro-photocatalytic reaction of ferroelectric semiconductors and also can enable the synergistic utilization of multiple energy sources such as solar and thermal energy, which is a promising strategy for environmental remediation.

Synergistic catalysis of ozonation and photooxidation by sandwich structured MnO2-NH2/GO/p-C3N4 on cephalexin degradation

Antibiotics such as cephalexin (CLX) are often detected in water and sewage, and advanced oxidation processes (AOPs) are usually the most effective method to degrade them. Currently, the synergy of AOPs has raised lively interest in water and wastewater treatment. Here the sandwiched catalyst of MnO₂-NH₂/GO/p-C₃N₄ (MN/GO/CN) is synthesized, in which graphene oxide (GO) acts as "core layer" connecting aminated MnO₂ (MnO₂-NH₂) for catalytic ozonation and proton-functionalized g-C₃N₄ (p-C₃N₄) for photocatalysis. The MN/GO/CN combines the AOPs of catalytic ozonation and photocatalysis, initiates hydroxyl radicals 4.2 times the sum of catalytic ozonation and photocatalysis, and achieves the first order kinetics constant of 2.4 × 10^-2/s, which is 2.7, 8.1 and 20.1 times that of catalytic ozonation, photo ozonation, and photocatalysis, respectively, and consequently reduces CLX from 1.0 mg/L to below the detection limit within 2.5 min, demonstrating the strong synergism between the AOPs. The sandwich structure enables GO to mediate the electron transfer between p-C₃N₄ and MnO₂-NH₂, which not only hinders electron-hole recombination on p-C₃N₄, but also speeds redox electron cycle on MnO₂ to promote the catalytic activity. The simultaneous catalytic ozonation and photocatalysis by sandwiched bifunctional catalyst to obtain synergistic effect will find its broad prospect in water and wastewater treatment.

Nanomaterial-enabled photothermal-based solar water disinfection processes: Fundamentals, recent advances, and mechanisms

The pathogenic microorganisms in water pose a great threat to human health. Photothermal and photothermocatalytic disinfection using nanomaterials (NPs) has offered a promising and effective strategy to address the challenges in solar water disinfection (SODIS), especially in the point-of-use operations. This review aims at providing comprehensive and state-of-the-art knowledge of photothermal-based disinfection by NPs. The fundamentals and principles of photothermal-based disinfection were first introduced. Then, recent advances in developing photothermal/photothermocatalytic catalysts were systematically summarized. The light-to-heat conversion and disinfection performance of a large variety of photothermal materials were presented. Given the complicated mechanisms of photothermal-based disinfection, the attacks from reactive oxygen species and heat, the destruction of bacterial cells, and the antibacterial effects of released metal ions were highlighted. Finally, future challenges and opportunities associated with the development of cost-effective photothermal/photothermocatalytic disinfection systems were outlined. This review will provide guidance in designing future NPs and inspire more research efforts from environmental nano-communities to move towards practical water disinfection operations.

Pollen Typhae-Based Magnetic-Powered Microrobots toward Acute Gastric Bleeding Treatment

Traditional Chinese herbal medicine (TCHM) is the naturally available pharmaceutical with millennia of evolution from ancient China, capable of a superior therapeutic index and minimized unwanted effects on the human body. This work presents a therapeutic microrobotic platform based on pollen typhae (PT), a typical type of TCHM, fabricated by coating porous PT microspheres with Fe3O4 nanoparticles (PT robots) via electrostatic adsorption. The PT robots exhibit effective and controllable motion in various biological media upon external magnetic control and, meanwhile, preserve the inherent hemostasis property of PT. The blood clotting capacity of PT robots is attributed to their stimulation of the endogenous blood coagulation pathway and platelets with increased counts, which could be further improved by their effective magnetic propulsion. The remote magnetic control also allows the manipulation of PT robots in mice stomach, inducing enhanced binding and prolonged retention of PT robots in stomach mucosa. Moreover, PT robots upon magnetic control show an enhanced hemostatic effect in treating the mice bearing acute gastric bleeding compared with other passive groups. This work offers a facile and feasible route to integrate TCHM with manmade micromachines possessing the innate curative features of TCHM. Such a design expanded the versatility of microrobots and can be generalized to vast types of TCHM for broader biomedical applications.