Insight into metal-free carbon catalysis in enhanced permanganate oxidation: Changeover from electron donor to electron mediator

Novel role of Silver(I) as electron shuttle for polymerization of chlorophenols by permanganate oxidation

Permanganate (Mn(VII)) oxidation is attracting increasing attention in the field of water treatment, however, it exhibits limited chemical oxygen demand (COD) removal due to its inability to completely destroy the structure of pollutants. This paper discovered the novel role of ionic silver as electron shuttle for regulation of chlorophenols (CPs) polymerization during Mn(VII) oxidation. The Mn(VII)-Ag(I) system displayed remarkable removal of CPs in real water bodies and facilitated polymerization to at least hexamerization for improved COD removal. The ring-closure reaction was proposed for the first time, potentially stabilizing chained oligomers and reducing their migration toxicity. Ag(I) plays a dual role to create the electron-deficient state of Mn(VII) and enhance the oxidation susceptibility of 2,4-DCP via complexation, which mediates the electron transfer to generate abundant phenoxyl radicals to initiate polymerization for the formation of filterable and settleable oligomers. Findings of this work would provide new inspirations for the development of highly-efficient, cost-effective and environment-friendly Mn(VII) oxidation technologies in removal of CPs-like contaminants.

Amplified electrochemiluminescence of Ru(dcbpy)32+ via coreactant active sites on nitrogen-doped graphene quantum dots

Searching for new alternative to tripropylamine (TPrA) with low toxicity and high chemical stability for the tris(4,4'-dicarboxylic acid-2,2'-bipyridyl)ruthenium (II) (Ru(dcbpy)32+) based coreactant electrochemiluminescence (ECL) system is essential for widespread analytical applications. Here, nitrogen-doped graphene quantum dots (NGQDs) have been discovered to significantly amplify the ECL emission and increase the ECL efficiency of Ru(dcbpy)32+ for the first time. However, the mechanism by which NGQDs act as coreactants is not well comprehended. Therefore, various optical and electrochemical technologies were employed to investigate the ECL mechanism. It is proposed that the amino and carboxyl groups on the surface of NGQDs play crucial roles as the coreactant active sites, catalyzing the oxidation of Ru(dcbpy)32+. Based on this foundation, an "on-off-on" ECL aptasensor for the quantification of acetamiprid was developed, exhibiting a broad linear range and a detection limit of 0.056 pM. Satisfactory recoveries, ranging from 98.0 % to 101.6 %, were achieved in pakchoi samples. Consequently, NGQDs could serve as coreactants for Ru(dcbpy)32+, offering new opportunities for constructing a variety of sensors with extensive analytical applications in the ECL field.

New insight into enhanced permanganate oxidation by lignocellulose-derived biochar: The overlooked role of persistent free radicals

Permanganate (Mn(VII)) is a traditional reagent used for water purification, but it is mild to deal with refractory organic contaminants of emerging concern. There is great interest in combination with effective and low-cost biochar to improve reaction kinetics of Mn(VII). Until recently, it still unclear how biomass composition and carbon structure of biochar influence the Mn(VII) oxidation performance. Herein, we prepared a series of biochar via pyrolyzing different sources of biomass, and their introduction enhanced 24 % of Mn(VII) oxidation of diclofenac (DCF) to 47.3 %∼100 % within 20 min. Particularly, Mn(VII)/walnut shell biochar (SBC) system achieved the highest reaction rate constant of 0.3817 min-1, 5.8 times faster than that by UVA-LED-activated Mn(VII). Physicochemical properties of biochar were found to be highly dependent on the organic compositions of biomass. According to quantitative structure-activity relationship (QSAR) studies, graphitization degree of biochar was recognized to be the decisive factor, facilitating the electron transfer from organics to Mn(VII)-biochar complexes. Lignin-abundant biomass was more conducive to producing highly-graphitized biochar with superior activity. Mn(III), identified as the sole reactive Mn intermediate in Mn(VII)/biochar systems, made the secondary contribution to contaminants removal. Impressively, Mn(III) formation was positively correlated with persistent free radicals (PFRs) intensity of biochar. Manipulation experiments and theoretical calculations corroborated that PFRs generated on pyrolyzed biomass and biopolymers (cellulose, hemicellulose and lignin), could donate electrons for Mn(VII) decomposition, regulating Mn(III) production via the synergy of PFRs' concentrations and types. Overall, this work offered new insights into the contribution of lignocellulose-derived biochar to Mn(VII) oxidation and contaminants removal.

Carbonaceous materials in structural dimensions for advanced oxidation processes

Carbonaceous materials have attracted extensive research and application interests in water treatment owing to their advantageous structural and physicochemical properties. Despite the significant interest and ongoing debates on the mechanisms through which carbonaceous materials facilitate advanced oxidation processes (AOPs), a systematic summary of carbon materials across all dimensions (0D-3D nanocarbon to bulk carbon) in various AOP systems remains absent. Addressing this gap, the current review presents a comprehensive analysis of various carbon/oxidant systems, exploring carbon quantum dots (0D), nanodiamonds (0D), carbon nanotubes (1D), graphene derivatives (2D), nanoporous carbon (3D), and biochar (bulk 3D), across different oxidant systems: persulfates (peroxymonosulfate/peroxydisulfate), ozone, hydrogen peroxide, and high-valent metals (Mn(VII)/Fe(VI)). Our discussion is anchored on the identification of active sites and elucidation of catalytic mechanisms, spanning both radical and nonradical pathways. By dissecting catalysis-related factors such as sp2/sp3 C, defects, and surface functional groups that include heteroatoms and oxygen groups in different carbon configurations, this review aims to provide a holistic understanding of the catalytic nature of different dimensional carbonaceous materials in AOPs. Furthermore, we address current challenges and underscore the potential for optimizing and innovating water treatment methodologies through the strategic application of carbon-based catalysts. Finally, prospects for future investigations and the associated bottlenecks are proposed.

Efficient degradation of sulfadiazine via facilitated electron transfer by iron-carbon catalyst with highly exposed active sites

The inaccessible active sites, excessive metal leaching and radical mediated degradation pathway greatly hinder the performances of Fe-C composite catalyst oxidation process in the advanced oxidation water treatment. Herein, a facile method was developed to in situ growth of MIL-53 (Fe) on the powder active carbon (PAC) surface by a mild condition, which finally yields PAC supported Fe3O4@C particles (PAC@MOFs-2T) after heat treatment. The detailed characterizations indicate that the fine Fe3O4 particles encapsulated with carbon layers were evenly anchored on the PAC as active sites, which made the catalytic centers highly accessible for the peroxydisulfate activation and sulfadiazine degradation. In addition, the carbon layers, coated on the active sites could prevent the metal leaching during the catalytic process resulting in the high stability in a wide pH range. More attractively, the density functional theory (DFT) simulations and emperimental evidences further proved that the oxidation was dominated by a electron transfer process (ETP), during which, the peroxydisulfate (PDS) was adsorbed on Fe3O4 to form PDS∗ with high oxidation potential to initiate the ETP. Meanwhile, it was also demonstrated that the optimized sample PAC@MOFs-2T enriched with electron donating groups could selectively degrade the sulfadiazine, which avoid the negative impacts from the co-existed foreign ions and organic matters during the oxidation process. In addition, the toxicity analysis of intermediate products revealed that the sulfadiazine can be degradated into low-toxic or non-toxic products, which further permits viability of this ETP mediated advanced oxidation processes.

Degradation of phenol by metal-free electro-fenton using a carbonyl-modified activated carbon cathode: Promoting simultaneous H2O2 generation and activation

The low yield of hydrogen peroxide, narrow pH application range, and secondary pollution due to iron sludge precipitation are the major drawbacks of the electro-Fenton (EF) process. Metal-free electro-Fenton technology based on carbonaceous materials is a promising green pollutant degradation technology. Activated carbon cathodes enriched with carbonyl functional groups were prepared using a two-step annealing method for the degradation of phenol pollutants. The •OH in the activation process of H2O2 were identified using the EPR test technique. The action mechanism of carbonyl groups on H2O2 activation was investigated in conjunction with density functional theory (DFT) calculations. The EPR tests demonstrated that the modified activated carbon could promote the in-situ activation of H2O2 to •OH. And the results of material analysis and DFT showed that C=O could facilitate the activation of hydrogen peroxide through the electron transfer mechanism as an electron-donating group. Electrochemical tests showed that both the oxygen reduction activity and 2e-ORR selectivity of the modified activated carbons were significantly improved. Compared with the original activated carbon cathode and EF, the degradation efficiency of phenol in the ACNH-1000/GF cathode was increased by 58.10% and 45.61%, respectively. Compared with EF, ACNH-1000/GF metal-free electro-Fenton effectively expands the pH application range, and is proven to be less affected by solution initial pH, while avoiding secondary pollution. The metal-free electro-Fenton system can save more than a quarter of the cost of EF system. This study has a deep understanding of the reaction mechanism of the carbonyl modified activated carbon, and provides valuable insights for the design of metal-free catalysts, so as to promote its application in the degradation of organic pollutants.

Unveiling the critical roles of nascent MnO2 in accelerating permanganate carbocatalysis

To probe the underlying mechanisms of carbocatalysis in enhanced permanganate (PM) oxidation and identify the exact roles of nascent MnO2, graphene aerogels (GA) were fabricated to activate PM for naproxen (NPX) degradation. All the three GA samples could accelerate NPX oxidation by PM, the rate constants and reaction stoichiometric efficiency (RSE) followed the order of GA900 > GA600 > GA300. Mechanistic studies revealed that Mn(VI), Mn(V) and Mn(III) were not the major reactive species involved in NPX oxidation, but highlighted the essential contribution of electron transfer pathway (ETP) mediated directly by GA and indirectly by nascent MnO2. For GA300 with strong electron-donating capability, it mainly served as the electron donor for PM decomposition, and indirectly oxidized NPX via nascent MnO2 mediated ETP, thereby exhibiting inferior RSE as well as mediocre recycling performance. GA600 and GA900 could serve as the electron shuttle to directly mediate the ETP for NPX degradation, the nascent MnO2 accumulated on GA framework during the reaction would also mediate the ETP from NPX to PM, thus displaying an obvious accelerating recycling performance. This work provides novel insights into the structure-dominated PM carbocatalysis, which contributes better to development of promising carbocatalysts and utilization of nascent MnO2.

Revealing the essence of anion ligands in regulating amorphous MnOx to activate peracetic acid for micropollutant removal

How the anion ligands of manganese precursors affect the catalytic activity of amorphous manganese oxides (MnOx) in Fenton-like process is poorly understood. Here, five amorphous MnOx synthesized by Mn(II) precursors with different ligands were characterized and adopted to activate peracetic acid (PAA) for bisphenol A (BPA) degradation. Although > 90 % BPA removal was achieved in the five MnOx/PAA processes via both adsorption and oxidation, the oxidation kobs greatly differentiates by the ligands types with the order of MnOx-N > MnOx-S > MnOx-Cl > MnOx-AA > MnOx-OA. Ligands types would affect the specific surface area of MnOx and their ability to adsorb BPA, however which is not the decisive factor in determining the contaminant oxidation efficiency. Multiple experimental results indicate that the generation of oxygen vacancies induced by the ligands alters the Mn(III)/Mn(IV) ratio, ultimately contributing to the different efficiency of BPA oxidation driven by the direct electron transfer mechanism. Moreover, amorphous MnOx holds the promise of practical applications in catalytic PAA of various micropollutants with good stability. This study advances the fundamental understanding of ligand-regulated amorphous MnOx-catalyzed PAA process.

Sludge-derived hydrochar modulates complete nonradical electron transfer in peroxydisulfate activation via pyrrolic-N and carbon defect: Implication for degrading electron-rich ionizable anilines compounds

Nonradical electron transfer process (ETP) is a promising pathway for pollutant degradation in peroxydisulfate-based advanced oxidation processes (PDS-AOPs). However, there is a critical bottleneck to trigger ETP by sludge-derived hydrochar due to its negatively charged surface, inferior porosity and electrical conductivity. Herein, pyrrolic-N doped and carbon defected sludge-derived hydrochar (SDHC-N) was constructed for PDS activation to degrade anilines ionizable organic compounds (IOC) through complete nonradical ETP oxidation. Degradation of anilines IOC was not only affected by the electron-donating capacity but also proton concentration in solution because of the ionizable amino group (-NH2). Diverse effects including proton favor, insusceptible and inhibition were observed. Impressively, addition of HCO3 with strong proton binding capacity boosted aniline degradation nearly 10 times. Moreover, characterizations and theoretical calculations demonstrated that pyrrolic-N increased electron density and created positively charged surface, profoundly promoting generation of SDHC-N-S2O82-* complexes. More delocalized electrons around carbon defect could enhance electron mobility. This work guides a rational design of sludge-derived hydrochar to mediate nonradical ETP oxidation, and provides insights into the impacts of proton on anilines IOC degradation.

Exploring the viability of peracetic acid-mediated antibiotic degradation in wastewater through activation with electrogenerated HClO

Electrochemical advanced oxidation processes (EAOPs) face challenging conditions in chloride media, owing to the co-generation of undesirable Cl-disinfection byproducts (Cl-DBPs). Herein, the synergistic activation between in-situ electrogenerated HClO and peracetic acid (PAA)-based reactive species in actual wastewater is discussed. A metal-free graphene-modified graphite felt (graphene/GF) cathode is used for the first time to achieve the electrochemically-mediated activation of PAA. The PAA/Cl- system allowed a near-complete sulfamethoxazole (SMX) degradation (kobs =0.49 min-1) in only 5 min in a model solution, inducing 32.7- and 8.2-fold rise in kobs as compared to single PAA and Cl- systems, respectively. Such enhancement is attributed to the occurrence of 1O2 (25.5 μmol L-1 after 5 min of electrolysis) from the thermodynamically favored reaction between HClO and PAA-based reactive species. The antibiotic degradation in a complex water matrix was further considered. The SMX removal is slightly susceptible to the coexisting natural organic matter, with both the acute cytotoxicity (ACT) and the yield of 12 DBPs decreasing by 29.4 % and 37.3 %, respectively. According to calculations, HClO accumulation and organic Cl-addition reactions are thermodynamically unfavored. This study provides a scenario-oriented paradigm for PAA-based electrochemical treatment technology, being particularly appealing for treating wastewater rich in Cl- ion, which may derive in toxic Cl-DBPs.

In-Depth Investigation of Role of -BCO2 in the Degradation of Sulfamethazine by Metal-Free Biochar/Persulfate: The Mechanism of Occurrence of Nonradical Process

The remediation of organic wastewater through advanced oxidation processes (AOPs) based on metal-free biochar/persulfate systems has been extensively researched. In this work, boron-doped alkali lignin biochar (BKC1:3) was utilized to activate peroxymonosulfate (PMS) for the removal of sulfamethazine (SMZ). The porous structure and substantial specific surface area of BKC1:3 facilitated the adsorption and thus degradation of SMZ. The XPS characterization and density functional theory (DFT) calculations demonstrated that -BCO2 was the main active site of BKC1:3, which dominated the occurrence of nonradical pathways. Neither quenching experiments nor EPR characterization revealed the generation of free radical signals. Compared with KC, BKC1:3 possessed more electron-rich regions. The narrow energy gap (ΔEgap = 1.87 eV) of BKC (-BCO2) promoted the electron transfer to the substable complex (BKC@PMS*) on SMZ, driving the electron transfer mechanism. In addition, the adsorption energy of BKC(-BCO2)@PMS was lower (-0.75 eV → -5.12 eV), implying a more spontaneous adsorption process. The O-O (PMS) bond length in BKC(-BCO2)@PMS increased significantly (1.412 Å → 1.481 Å), which led to the easier decomposition of PMS during adsorption and facilitated the generation of 1O2. More importantly, a combination of Gaussian and LC-MS techniques was hypothesized regarding the attack sites and degradation intermediates of the active species in this system. The synergistic T.E.S.T software and toxicity tests predicted low or even no toxicity of the intermediates. Overall, this study proposed a strategy for the preparation of metal-free biochar, aiming to inspire ideas for the treatment of organic-polluted wastewater through advanced oxidation processes (AOPs).

Carbon Nanotubes as Controllable Electric-Field-Induced Bipolar Electrodes for Efficient Water Purification

Advanced oxidation processes (AOPs) are the most efficient water cleaning technologies, but their applications face critical challenges in terms of mass/electron transfer limitations and catalyst loss/deactivation. Bipolar electrochemistry (BPE) is a wireless technique that is promising for energy and environmental applications. However, the synergy between AOPs and BPE has not been explored. In this study, by combining BPE with AOPs, we develop a general approach of using carbon nanotubes (CNTs) as electric-field-induced bipolar electrodes to control electron transfer for efficient water purification. This approach can be used for permanganate and peroxide activation, with superior performances in the degradation of refractory organic pollutants and excellent durability in recycling and scale-up experiments. Theoretical calculations, in situ measurements, and physical experiments showed that an electric field could substantially reduce the energy barrier of electron transfer over CNTs and induce them to produce bipolar electrodes via electrochemical polarization or to form monopolar electrodes through a single particle collision effect with feeding electrodes. This approach can continuously provide activated electrons from one pole of bipolar electrodes and simultaneously achieve "self-cleaning" of catalysts through CNT-mediated direct oxidation from another pole of bipolar electrodes. This study provides a fundamental scientific understanding of BPE, expands its scope in the environmental field, and offers a general methodology for water purification.

pH-modulated oxidation of organic pollutants for water decontamination: A deep insight into reactivity and oxidation pathway

Solution pH is one of the primary factors affecting the efficiency of water decontamination. Although the influence of pH on oxidants activation, catalyst activity, and reactive oxygen species have been widely explored, there is still a scarcity of systemic studies on the changes in the oxidation behavior of organic pollutants at different pH levels. Herein, we report the influence laws of pH on the forms, reactivities, active sites, degradation pathways, and products toxicities of organic pollutants. Changes in pH cause the protonation or deprotonation of organic pollutants and further affect their forms and chemistry (e.g., electrostatic force, hydrophobicity, and oxidation potential). The oxidation potential of organic pollutants follows the order: protonated form > pristine form > deprotonated form. Moreover, protonation or deprotonation can modify the active sites and degradation pathways of organic pollutants, wherein deprotonation renders them more susceptible to electrophilic attack, while protonation reduces their activity against electrophilic and nucleophilic attacks. Additionally, pH adjustments can modify the degradation pathway and the toxicity of transformation products. Overall, pH changes can affect the oxidation fate of organic pollutants by altering their structure, which distinguishes it from the effect of pH on oxidants or oxidant activation processes.

Mechanically treated Mn2O3 triggers peracetic acid activation for superior non-radical oxidation of micropollutants: Identification of reactive complexes

This study used a simple mechanical ball milling strategy to significantly improve the ability of Mn2O3 to activate peracetic acid (PAA) for sustainable and efficient degradation of organic micropollutant (like bisphenol A, BPA). BPA was successfully removed and detoxified via PAA activation by the bm-Mn2O3 within 30 min under neutral environment, with the BPA degradation kinetic rate improved by 3.4 times. Satisfactory BPA removal efficiency can still be achieved over a wide pH range, in actual water and after reuse of bm-Mn2O3 for four cycles. The change in hydrophilicity of Mn2O3 after ball milling evidently elevated the affinity of Mn2O3 for binding to PAA, while the reduction in particle size exposed more active sites contributing partially to catalytic oxidation. Further analysis revealed that BPA oxidation in the ball mill-treated Mn2O3 (bm-Mn2O3)/PAA process mainly depends on the bm-Mn2O3-PAA complex (i.e., Mn(III)-OO(O)CCH3) mediated non-radical pathway rather than R-O• and Mn(IV). Especially, the existence of the Mn(III)-PAA complex was definitely verified by in situ Raman spectroscopy and in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). Simultaneously, density functional theory calculations determined that PAA adsorbs readily on manganese sites thereby favoring the formation of Mn(III)-OO(O)CCH3 complexes. This study advances an in-depth understanding of the underlying mechanisms involved in the manganese oxide-catalyzed activation of PAA for superior non-radical oxidation of micropollutants.

Dual Nonradical Catalytic Pathways Mediated by Nanodiamond-Derived sp2/sp3 Hybrids for Sustainable Peracetic Acid Activation and Water Decontamination

Peracetic acid (PAA) oxidation catalyzed by metal-free carbons is promising for advanced water decontamination. Nevertheless, developing reaction-oriented and high-performance carbocatalysts has been limited by the ambiguous understanding of the intrinsic relationship between carbon chemical/molecular structure and PAA transformation behavior. Herein, we comprehensively investigated the PAA activation using a family of well-defined sp2/sp3 carbon hybrids from annealed nanodiamonds (ANDs). The activity of ANDs displays a volcano-type trend, with respect to the sp2/sp3 ratio. Intriguingly, sp3-C-enriched AND exhibits the best catalytic activity for PAA activation and phenolic oxidation, which is different from persulfate chemistry in which the sp2 network normally outperforms sp3 hybridization. At the electron-rich sp2-C site, PAA undergoes a reduction reaction to generate a reactive complex (AND-PAA*) and induces an electron-transfer oxidation pathway. At the sp3-C site adjacent to C═O, PAA is oxidized to surface-confined OH* and O* successively, which ultimately evolves into singlet oxygen (1O2) as the primary reactive species. Benefiting from the dual nonradical regimes on sp2/sp3 hybrids, AND mediates a sustainable redox recycle with PAA to continuously generate reactive species to attack water contaminants, meanwhile maintaining structural/chemical integrity and exceptional reusability in cyclic runs.

Origins of Selective Oxidation in Carbon-Based Nonradical Oxidation Processes toward Organic Pollutants: Quantitative Structure-Activity Relationships (QSARs)

Metal-free carbon material-mediated nonradical oxidation processes (C-NOPs) have emerged as a research hotspot due to their excellent performance in selectively eliminating organic pollutants in aqueous environments. However, the selective oxidation mechanisms of C-NOPs remain obscure due to the diversity of organic pollutants and nonradical active species. Herein, quantitative structure-activity relationship (QSAR) models were employed to unveil the origins of C-NOP selectivity toward organic pollutants in different oxidant systems. QSAR analysis based on adsorption and oxidation descriptors revealed that C-NOP selectivity depends on the oxidation potentials of organic pollutants rather than on adsorption interactions. However, the dominance of electronic effects in selective oxidation decreases with increasing structural complexity of organic pollutants. Moreover, the oxidation threshold solely depends on the inherent electronic nature of organic pollutants and not on the reactivity of nonradical active species. Notably, the accuracy of substituent descriptors (Hammett constants) and theoretical descriptors (e.g., highest occupied molecular orbital energy, ionization potential, and single-electron oxidation potential) is significantly influenced by the complexity and molecular state of organic pollutants. Overall, the study findings reveal the origins of organic pollutant-oriented selective oxidation and provide insight into the application of descriptors in QSAR analysis.

Permanganate (PM) pretreatment improves medium-chain fatty acids production from sewage sludge: The role of PM oxidation and in-situ formed manganese dioxide

Medium-chain fatty acids (MCFAs) production from sewage sludge is mainly restricted by the complex substrate structure, competitive metabolism and low electron transfer rate. This study proposes a novel permanganate (PM)-based strategy to promote sludge degradation and MCFAs production. Results show that PM pretreatment significantly increases MCFAs production, i.e., attaining 12,036 mg COD/L, and decreases the carbon fluxes of electron acceptor (EA)/electron donor (ED) to byproducts. Further analysis reveals that PM oxidation enhances the release and biochemical conversion of organic components via disrupting extracellular polymers (EPS) structure and reducing viable cells ratio, providing directly available EA for chain elongation (CE). The microbial activity positively correlated with MCFAs generation are apparently heightened, while the competitive metabolism of CE (i.e., methanogensis) can be completely inhibited. Accordingly, the functional bacteria related to critical bio-steps and dissimilatory manganese reduction are largely enriched. Further mechanism exploration indicates that the main contributors for sludge solubilization are 1O2 (61.6 %) and reactive manganese species (RMnS), i.e., Mn(V)/Mn(VI) (22.3 %) and Mn(III) (∼16.1 %). As the main reducing product of PM reaction, manganese dioxide (MnO2) can enable the formation of microbial aggregates, and serve as electron shuttles to facilitate the carbon fluxes to MCFAs during CE process. Overall, this strategy can achieve simultaneous hydrogen recovery, weaken competitive metabolisms and provide electron transfer accelerator for CE reactions.

Ultrasonic neural regulation over two-dimensional graphene analog biomaterials: Enhanced PC12 cell differentiation under diverse ultrasond excitation

Two-dimensional (2D) biomaterials, with unique planar topology and quantum effect, have been widely recognized as a versatile nanoplatform for bioimaging, drug delivery and tissue engineering. However, during the complex application of nerve repair, in which inflammatory microenvironment control is imperative, the gentle manipulation and trigger of 2D biomaterials with inclusion and diversity is still challenging. Herein, inspired by the emerging clinical progress of ultrasound neuromodulation, we systematically studied ultrasound-excited 2D graphene analogues (graphene, graphene oxide, reduced graphene oxide (rGO) and carbon nitride) to explore their feasibility, accessibility, and adjustability for ultrasound-induced nerve repair in vitro. Quantitative observation of cell differentiation morphology demonstrates that PC12 cells added with rGO show the best compatibility and differentiation performance under the general ultrasound mode (0.5 w/cm2, 2 min/day) compared with graphene, graphene oxide and carbon nitride. Furthermore, the general condition can be improved by using a higher intensity of 0.7 w/cm2, but it cannot go up further. Later, ultrasonic frequency and duty cycle conditions were investigated to demonstrate the unique and remarkable inclusion and diversity of ultrasound over conventional electrical and surgical means. The pulse waveform with power of 1 MHz and duty cycle of 50 % may be even better, while the 3 MHz and 100 % duty cycle may not work. Overall, various graphene analog materials can be regarded as biosafe and accessible in both fundamental research and clinical ultrasound therapy, even for radiologists without material backgrounds. The enormous potential of diverse and personalized 2D biomaterials-based therapies can be expected to provide a new mode of ultrasound neuromodulation.

Carbocatalysts for Enhancing Permanganate Oxidation of Sulfisoxazole

Permanganate (Mn(VII)) is extensively applied in water purification due to its stability and ease of handling, but it is a mild oxidant for trace organic contaminants (TrOCs). Hence, there is significant interest in strategies for enhancing reaction kinetics, especially in combination with efficient and economical carbocatalysts. This study compared the performance of four carbocatalysts (graphite, graphene oxide (GO), reduced-GO (rGO), and nitrogen-doped rGO (N-rGO)) in accelerating sulfisoxazole (SSX) oxidation by Mn(VII) and found that GO exhibited the greatest catalytic performance. Besides, the Mn(VII)/GO system shows desirable capacities to remove a broad spectrum of TrOCs. We proposed that the degradation of SSX in Mn(VII)-GO suspensions follows two routes: (i) direct oxidation of SSX by Mn species [both Mn(VII) and in situ formed MnO2(s)] and (ii) a carbocatalyst route, where GO acts as an electron mediator, accepting electrons from SSX and transferring them to Mn(VII). We developed a mathematical model to show the contribution of each parallel pathway and found one-electron transfer is primarily responsible for accelerating SSX removal in the Mn(VII)/GO system. Findings in this study showed that GO provides a simple and effective strategy for enhancing the reactivity of Mn(VII) and provided mechanistic insights into the GO-catalyzed redox reaction between SSX and Mn(VII).

Efficient decontamination of organic pollutants from wastewater by covalent organic framework-based materials

Covalent organic frameworks (COFs), assembling through covalent bonds, are a rising class of porous materials. Nowadays, various COFs are widely applied in organic pollutants decontamination due to the outstanding capabilities of large surface area, multiple functional groups, porous structure, excellent absorptivity, flexible design and so on. This review concentrates on the applications of COFs in different decontamination technologies such as solid-phase extraction, membrane filtration and sieving, adsorption, and catalysis reaction. The factors influencing water chemistry, such as pH, temperature, salt concentration and natural organic matter, are summarized in terms of their impact on decontamination performance and the extraction mechanisms for the diverse analytes. The interaction mechanisms between COFs and organic pollutants were hydrogen bonding, π-π stacking, hydrophilic, hydrophobic, and electrostatic interactions. Furthermore, a perspective on current obstacles and upcoming developments of COFs for organic pollutant removal has been provided. Due to their adaptable and versatile design as well as elaborate and diverse functionalization, COFs possess significant possibility in ameliorating environmental pollution.

Green polyaspartic acid as a novel permanganate activator for enhanced degradation of organic contaminants: Role of reactive Mn(III) species

Attention has been long focused on enhancing permanganate (Mn(VII)) oxidation capacity for eliminating organic contaminants via generating active manganese intermediates (AMnIs). Nevertheless, limited consideration has been given to the unnecessary consumption of Mn(VII) due to the spontaneous disproportionation of AMnIs during their formation. In this work, we innovatively introduced green polyaspartic acid (PASP) as both reducing and chelating agents to activate Mn(VII) to enhance the oxidation capacity and utilization efficiency of Mn(VII). Multiple lines of evidence suggest that Mn(III), existing as Mn(III)-PASP complex, was generated and dominated the degradation of bisphenol A (BPA) in the Mn(VII)/PASP system. The stabilized Mn(III) species enabled Mn(VII) utilization efficiency in the Mn(VII)/PASP system to be higher than that in Mn(VII) alone. Moreover, the electrophilic Mn(III) species was verified to mainly attack the inclusive benzene ring and isopropyl group to realize BPA oxidation and its toxicity reduction in the Mn(VII)/PASP system. In addition, the Mn(VII)/PASP system showed the potential for selectively oxidizing organic contaminants bearing phenol and aniline moieties in real waters without interference from most of coexisting water matrices. This work brightens an overlooked route to both high oxidation capacity and efficient Mn(VII) utilization in the Mn(VII)-based oxidation processes.

Enhanced ferrate(VI) oxidation of organic pollutants through direct electron transfer

Fe(VI) is a versatile agent for water purification, and various strategies have been developed to improve its pollutant removal efficiency. Herein, it was found that in addition to intermediate iron species [Fe(IV)/Fe(V)], direct electron transfer (DET) played a significant role in the abatement of organic pollutants in Fe(VI)/carbon quantum dots (CQDs) system. Around 86, 83, 73, 64, 52, 45 and 17% of BPA, DCF, SMX, 4-CP, phenol, p-HBA, and IBP (6 μM) could be oxidized by 30 μM of Fe(VI), whereas with the addition of CQDs (4 mg/L), the oxidation ratio of these pollutants increased to 98, 99, 80, 88, 87, 66 and 57%, respectively. The negative impact induced by solution pH and background constituents on Fe(VI) abatement of pollutants could be alleviated by CQDs, and CQDs acted as catalysts for mediating DET from organic pollutants to Fe(VI). Theoretical calculation revealed that iron species [Fe(VI)/Fe(V)/Fe(IV)] was responsible for the oxidation of 36% of phenol, while DET contributed to the oxidation of 64% of phenol in the Fe(VI)/CQDs system. Compared with iron species oxidation, the CQDs mediated DET from pollutants to Fe(VI) was more efficient for utilizing the oxidation capacity of Fe(VI). The DET mechanism presented in the study provides a prospective strategy for improving the pollution control potential of Fe(VI).

Waste leather derived porous carbon boosted Fenton oxidation towards removal of diethyl phthalate: Mechanism and long-lasting performance

The acceleration of Fe(III)/Fe(II) conversion in Fenton systems is the critical route to achieve the long-lasting generation of reactive oxygen species towards the oxidation of refractory contaminants. Here, we found that waste leather derived porous carbon materials (LPC), as a simple and readily available metal-free biochar material, can promote the Fe(III)/H2O2 system to generate hydroxyl radicals (•OH) for oxidizing a broad spectrum of contaminants. Results of characterizations, theoretical calculations, and electrochemical tests show that the surface carbonyl groups of LPC can provide electron for direct Fe(III) reduction. More importantly, the graphitic-N on surface of LPC can enhance the reactivity of Fe(III) for accelerating H2O2 induced Fe(III) reduction. The presence of LPC accelerates the Fe(III)/Fe(II) redox cycle in the Fe(III)/H2O2 system, sustainable Fenton chain reactions is thus initiated for long-lasting generation of hydroxyl radicals without adding Fe(II). The continuous flow mode that couples in-situ Fenton-like oxidation and LPC with excellent adsorption catalytic properties, anti-coexisting substances interference and reusability performance enables efficient, green and sustainable degradation of trace organic pollutants. Therefore, the application of metal-free carbon materials in Fenton-like system can solve its rate-limiting problem, reduce the production of iron sludge, achieve green Fenton chemistry, and facilitate the actual engineering application of economic and ecological methods to efficiently remove trace organic contaminants from actual water sources.

A critical review on correlating active sites, oxidative species and degradation routes with persulfate-based antibiotics oxidation

At present, numerous heterogeneous catalysts have been synthesized to activate persulfate (PS) and produce various reactive species for antibiotic degradation from water. However, the systematic summary of the correlation among catalyst active sites, PS activation pathway and pollutant degradation has not been reported. This review summarized the effect of metal-based, carbon-based and metal-carbon composite catalysts on the degradation of antibiotics by activating PS. Metal and non-metal sites are conducive to inducing different oxidation pathways (SO₄^•-, ^•OH radical oxidation and ¹O₂ oxidation, mediated electron transfer, surface-bound reactive complexes and high-valent metal oxidation). SO₄^•- and ^•OH are easy to attack CH, S-N, CN bonds, CC double bonds and amino groups in antibiotics. ¹O₂ is more selective to the structure of the aniline ring and amino group, and also to attacking CS, CN and CH bonds. Surface-bound active species can cleave CC, SN, CS and CN bonds. Other non-radical pathways may also induce different antibiotic degradation routes due to differences in oxidation potential and electronic properties. This critical review clarified the functions of active sites in producing different reactive species for selective oxidation of antibiotics via featured pathways. The outcomes will provide valuable guidance of oriented-regulation of active sites in heterogeneous catalysts to produce on-demand reactive species toward high-efficiency removing antibiotics from water.

Effective degradation of atrazine by spinach-derived biochar via persulfate activation system: Process optimization, mechanism, degradation pathway and application in real wastewater

Herein, biochar derived from spinach remnants was prepared for the first-time for the utilization in persulfate (PS) activation to effectively degrade atrazine. Characteristics of the prepared biochar were explored using advanced analyses. Control experiments implied the efficient activation of PS in the presence of the synthesized biochar. The highest degradation of atrazine (99.8%) could be attained at atrazine concentration of 7.2 mg/L, PS concentration of 7.7 mM, biochar dose of 1.88 g/L and reaction time of 120 min. The prepared biochar displayed a high recyclability performance attaining degradation ratios of 98.2, 96.53, 96.4, 92.8 and 88% in five sequential cycles under the optimum conditions. The degradation mechanism was explored showing that sulfate radicals were the prime reactive species in the degradation system. The degradation intermediates were specified, and the degradation pathways were propositioned. The highest REs in agrochemical industrial wastewater reached 80.21 and 83.43% of atrazine and TOC after 2 h. NH₃ (348.4 mg/L) was reduced to 168.3 mg/L (RE: 51.7%) while level of NO₃ (94.7 mg/L) was increased by 98.8% (188.3 mg/L) in the treated effluent due to oxidation of NH₃ to nitrite and then nitrate. Extension of reaction time could contribute to achieving full mineralization of the real wastewater due to the residual PS after 120 min. The effectiveness and low-cost of biochar@PS system as well as its high performance in degrading real wastewater support the efficiency of the prepared biochar to be applied on an industrial scale.

The Collision between g-C3 N4 and QDs in the Fields of Energy and Environment: Synergistic Effects for Efficient Photocatalysis

Recently, graphitic carbon nitride (g-C₃ N₄ ) has attracted increasing interest due to its visible light absorption, suitable energy band structure, and excellent stability. However, low specific surface area, finite visible light response range (<460 nm), and rapid photogenerated electron-hole (e^- -h⁺ ) pairs recombination of the pristine g-C₃ N₄ limit its practical applications. The small size of quantum dots (QDs) endows the properties of abundant active sites, wide absorption spectrum, and adjustable bandgap, but inevitable aggregation. Studies have confirmed that the integration of g-C₃ N₄ and QDs not only overcomes these limitations of individual component, but also successfully inherits each advantage. Encouraged by these advantages, the synthetic strategies and the fundamental of QDs/g-C₃ N₄ composites are briefly elaborated in this review. Particularly, the synergistic effects of QDs/g-C₃ N₄ composites are analyzed comprehensively, including the enhancement of the photocatalytic performance and the avoidance of aggregation. Then, the photocatalytic applications of QDs/g-C₃ N₄ composites in the fields of environment and energy are described and further combined with DFT calculation to further reveal the reaction mechanisms. Moreover, the stability and reusability of QDs/g-C₃ N₄ composites are analyzed. Finally, the future development of these composites and the solution of existing problems are prospected.

N-doped porous bowl-like carbon with superhigh external surface area for ultrafast degradation of bisphenol A: Key role of site exposure degree

High-temperature nitrogen (N) doping boosts the activity of biochars for peroxymonosulfate (PMS) activation, but the N heat loss causes the unsatisfactory catalytic efficiency. Improving the surface area for obtaining the high exposure of N sites is a promising solution. Herein, a soft template-KHCO₃ etching strategy is used to synthesize the N-doped porous bowl-like carbon (NPBC) with ultrahigh external surface area (1610.8 m² g^-1). The bowl-like structure eliminates inert bulk interior and allows unobstructed mass transfer of reactants onto both outer and inner surfaces, while the large pore channels by KHCO₃ etching further improves the exposure degree of limited N sites. Although NPBC has only 0.43% N content, 93.1% of bisphenol A (BPA) is removed within 1 min through the electron-transfer pathway by fully utilizing the N active centers, and the kinetic rate constant (k) reaches 5.29 min^-1, exceeding reported values by 2-270 times. Moreover, the NPBC/PMS system possesses excellent applicability for various organics and conditions, effectively mineralizes BPA and reduces effluent biotoxicity. A quantitative index W representing N exposure degree is first proposed and shows high linearity with the k values of BPA degradation (R²=0.992, 0 <W<3750 m² g^-1%^-1), proving the critical role of W in determining catalytic efficiency.

Insight into boron-doped biochar as efficient metal-free catalyst for peroxymonosulfate activation: Important role of -O-B-O- moieties

In recent years, metal-free catalysts for persulfate-mediated oxidation processes have been widely applied to remove contaminants in the aquatic environment. Herein, a simple pyrolysis approach was used to synthesize the boron doped biochars (B@TBCs) derived from boric acid mixed with tea seed shells powders. The obtained B@TBCs exhibited fantastic capability to boost PMS (0.5 mM) activation for 90%∼ removal of oxytetracycline (OTC) within 20 min. Through the correlation analysis and DFT calculations, it was concluded that the apparent rate constant of pollutants removal was greatly related to the -O-B-O- groups on the biochars, which could improve the electron-donating capacity of the biochar. In addition, the degradation process of OTC was pH-dependent because of the changed roles of ROSs under different pH. Finally, according to the DFT calculation, LC-MS and toxicological analysis, the degradation pathways of pollutants and the toxicity changes during the degradation process were obtained. These findings consolidated the theoretical basis for further boosting the catalytic activity of B-doped biochars and expanded the imagination for the modification of other metal-free biochar catalysts for PMS activation.

Roles of MnO2 Colloids and Mn(III) during the Oxidation of Organic Contaminants by Permanganate

Although intermediate manganese species can be generated during the reactions of permanganate (Mn(VII)) with organic pollutants in water, the role of the in situ generated MnO₂ colloids in the Mn(VII) oxidation process remained controversial and the contribution of Mn(III) was largely neglected. This study showed that the apparent second-order rate constants (k_app) of Mn(VII) oxidation of methyl phenyl sulfoxide and carbamazepine remained constant with time. However, the degradation of four selected phenolic contaminants by Mn(VII) exhibited an autoaccelerating trend and a linear trend at pH 3.0-6.0 and pH 7.0-9.0, respectively. Multiple lines of evidence revealed that the occurrence of the autoaccelerating trend in the Mn(VII) oxidation process was ascribed to the oxidation of the phenolic organics by MnO₂ colloids. The influence of pyrophosphate on the oxidation of different organic contaminants by MnO₂ colloids suggests that Mn(III) was also responsible for the autoaccelerating oxidation of organic contaminants by Mn(VII) under specific reaction conditions. The kinetic models revealed that the overall contributions of MnO₂ colloids and Mn(III) ranged within 6.6-67.9% during the autoaccelerating oxidation of phenolic contaminants by Mn(VII). These findings advance the understanding of the roles of MnO₂ colloids and Mn(III) in the Mn(VII) oxidation process.

Single atom Mn anchored on N-doped porous carbon derived from spirulina for catalyzed peroxymonosulfate to degradation of emerging organic pollutants

Highly efficient single atom catalysts are critical to substantially promote for peroxymonosulfate (PMS) activation to organic pollutant degradation, but it remains a challenge at present. Herein, single atom Mn anchored on N-doped porous carbon (SA-Mn-NSC) was synthesized by ball milling of Mn-doped carbon nitride and spirulina biochar to dominantly activate PMS. The precursor of carbon nitride and spirulina possessed a strong coordinating capability for Mn(II), facilitating the formation of highly dispersed nitrogen-coordinated Mn sites (Mn-N₄). The SA-Mn-NSC catalyst exhibited high activity and stability in the heterogeneous activation of PMS to degrade a wide range of pollutants within 10 min, showing an outstanding degradation rate constant of 0.31 min^-1 in enrofloxacin (ENR) degradation. The high surface density of Mn-N₄ sites and abundant interconnected meso-macro pores were highly favorable for activating PMS to produce ¹O₂ and high-valent manganese (Mn(IV)) for pollutant degradation. This work offers a new pathway of using a low-cost and easily accessible single-atom catalysts (SACs) and could inspire more catalytic oxidation strategies.

Accelerating Fe2+/Fe3+ cycle via biochar to improve catalytic degradation efficiency of the Fe3+/persulfate oxidation

The sluggish Fe³⁺/Fe²⁺ cycle was the rate-limiting step in the Fenton-like reaction, and metal-free carbonaceous materials are considered as emerging alternatives to solve this problem. However, the effect of carbon material properties on the distribution of reactive species remains poorly understood. This study investigated the possibility and mechanism of using biochar to accelerate the Fe³⁺/Fe²⁺ cycle to overcome the low efficiency of Fe³⁺/persulfate (PS) catalytic oxidation of phenanthrene. More importantly, the contribution of reactive species in the reaction systems with the variation of biochar pyrolysis temperatures was quantitatively studied. The results showed that medium-temperature derived biochar (BC500) had the greatest ability to enhance the Fenton-like system compared to the low- and high-temperature (BC350/700), and the first-order rate constant achieved 5.2 and 35.7-fold increase against the biochar/PS and Fe³⁺/PS systems, respectively. Using electrochemical evidence, sulfoxide probe tests, and steady-state concentration calculations, radicals yields were found to rise and then reduce with decreasing pyrolysis temperature, while the nonradical contribution of Fe(IV) increased to 56.3%. Electron paramagnetic resonance, Boehm titration, and Raman spectroscopy unraveled that the enhanced effect of biochar resulted from itself persistent free radicals, phenolic-OH, and edge defects, which enabled electron transfer between Fe³⁺ and biochar. Fe²⁺ was thus continuously generated and effectively activated the PS. This work enables a better understanding of the Fe³⁺-mediated Fenton-like reaction in the presence of biochar and provides a sustainable green strategy for Fenton chemistry with potential applications.