FexN produced in pharmaceutical sludge biochar by endogenous Fe and exogenous N doping to enhance peroxymonosulfate activation for levofloxacin degradation

Novel millimeter-sized honeycomb-like Fe/Fe3C@HBC from waste cotton textiles towards rapid degradation of ofloxacin via activation of H2O2

Although multiphase catalysts with large sizes exhibit excellent recyclability and low toxicity in heterogeneous Fenton reactions, their reactivity, reusability and storage stability for degradation of organic contaminants still need improvement, which is essential for treating complex wastewater and ensuring environmental sustainability. In this study, the waste cotton textiles were firstly used as the carbon source to generate a novel millimeter-sized catalyst (Fe/Fe3C@HBC) with a honeycomb-like structure, which could effectively activate H2O2 to realize rapid removal of ofloxacin (OFL) (100% in 10 min). It achieved remarkable removal performance across a broad temperature range (4-40 °C) and high-concentration OFL. It even demonstrated excellent removal towards other typical contaminants (Tetracycline, Ciprofloxacin, Methylene Blue, Rhodamine B, Malachite Green), showing outstanding storage stability, physical structural stability, reusability and separation characteristics. Whereafter, its removal mechanism was also explored, showing that it was entirely dependent on the degradation by the reactive oxygen species (ROS), including •OH, O2•- and 1O2, as well as the persistent free radicals from the catalyst. Moreover, the honeycomb-like structure promoted the effective utilization of H2O2, facilitated the generation of •OH and expedited the accumulation of OFL on the catalyst surface. Fe/Fe3C (inside of the catalytic instead of in the reaction solution) was essential for the degradation. Finally, the OFL degradation pathways and toxicity predictions were also proposed. Overall, this innovation supports cleaner water resources and enhances public health, demonstrating a significant step forward in environmental remediation technologies.

Nitrogen and magnesium codoped biochar activates periodate to remediate bensulfuron methyl-contaminated water at low temperature: Performance, mechanisms, and phytotoxicity

Bensulfuron methyl (BSM), a typical sulfonylurea herbicide, has been widely used worldwide for weed suppression and crop protection. Nevertheless, the long-term and prolonged usage led to residues in environment, resulting in the reduction of crop yields and even threatening food security. In this study, the nitrogen/magnesium codoped biochar (NMg-BC) was prepared via two-step pyrolysis method to activate periodate (PI) for BSM degradation. The results demonstrated BSM degradation rate was 87.9 % within 10 min by NMg-BC/PI system at 15 ℃. The system exhibited the favorable tolerance to environmental changes (pH, temperature, anions, and humic acids), presenting high removal efficiency of BSM. Radicals (IO3•) and non-radicals (1O2 and electron transfer) pathways contributed to the degradation of BSM, while the latter performed a crucial role in BSM degradation. Theoretical calculations further confirmed doped of N and Mg changed the electron configuration and electrostatic potential (ESP) distribution of biochar, which was beneficial to provide more active sites for PI activation. Hydroponic experiments showed that NMg-BC/PI system could effectively degrade BSM, and its residue had no significant effect on the length and weight of soybean. The study provides a promising approach for the pollutant remediation in cold regions.

Preparation of low-cost sludge-based highly porous biochar for efficient removal of refractory pollutants from agrochemical and pharmaceutical wastewater

Producing a high-performance sludge biochar through a feasible method is a great challenge and is crucial for practicability. Herein, we reported a highly porous sludge biochar synthesized from agrochemical-pharmaceutical and municipal sludge blends through a novel pyrolysis-acid treatment-post pyrolysis method. The optimized biochar named ASMS91 obtained interconnected pores with a total pore volume of 0.894 cm3/g and a surface area of 691.4 m2/g through extended acid wash and subsequent post-pyrolysis, which is superior to non-activated sludge biochar. ASMS91 removed 45.3 % of wastewater COD (156 mg/L) in 24 h, which was rapid and higher performance than commercial activated carbon (1000 iodine number). This outstanding performance is due to its high adsorption ability of long-chain aliphatic compounds (e.g., 2,4-Di-tert-butylphenol, neophytadiene and eicosane) into mesopores, which accounts for 71.8 % of pore filling. ASMS91 was highly recyclable, and adsorption was reduced by only 5.3 % after the 4th cycle. It also outperformed other sludge biochar in literature in removing perfluorooctanoic acid (PFOA), 6:2 fluorotelomer sulfonate (6:2 FTS), sulfamethoxazole, methylene blue, and methylene orange. Finally, the feasibility of our proposed method was validated by a brief techno-economic analysis. This feasible approach may support future research regarding sludge valorization and low-cost chemical wastewater treatment.

Promoting Electrocatalytic Reduction of CO2 and Nitrate to Urea on N-Doped Porous Hollow Carbon Spheres

The electrocatalytic coreduction of CO2 and nitrate is a green method for urea synthesis, mitigating CO2 emission and nitrate contamination. However, its slow kinetics and high energy barrier result in a poor urea production performance. Herein, we reported N-doped porous hollow carbon spheres (N-PHCS) for promoting CO2 and nitrate conversion to urea via nanoconfinement and N-doping from both reaction kinetics and thermodynamics. A high urea yield of 12.0 mmol h-1 gcat-1 with Faradaic efficiency of 19.1% was achieved on N-PHCS at -1.0 V (vs Ag/AgCl), which was comparable to or even higher than those of metal-based electrocatalysts reported. The experimental and theoretical calculation results revealed that carbon spheres with an appropriate interior void and pore size were favorable for confining reactants and intermediates to accelerate urea production, while N-doping can reduce the energy barrier for urea synthesis. By regulating the microstructure and N doping of N-PHCS, it showed a superior performance for urea electrosynthesis. The energy favorable pathway for urea synthesis was through the C-N coupling reaction of *NO and *CO, and pyridinic N can reduce the reaction energy barrier.

Deciphering the Novel Picolinate-Mn(II)/peroxymonosulfate System for Sustainable Fenton-like Oxidation: Dominance of the Picolinate-Mn(IV)-peroxymonosulfate Complex

A highly efficient and sustainable water treatment system was developed herein by combining Mn(II), peroxymonosulfate (PMS), and biodegradable picolinic acid (PICA). The micropollutant elimination process underwent two phases: an initial slow degradation phase (0-10 min) followed by a rapid phase (10-20 min). Multiple evidence demonstrated that a PICA-Mn(IV) complex (PICA-Mn(IV)*) was generated, acting as a conductive bridge facilitating the electron transfer between PMS and micropollutants. Quantum chemical calculations revealed that PMS readily oxidized the PICA-Mn(II)* to PICA-Mn(IV)*. This intermediate then complexed with PMS to produce PICA-Mn(IV)-PMS*, elongating the O-O bond of PMS and increasing its oxidation capacity. The primary transformation mechanisms of typical micropollutants mediated by PICA-Mn(IV)-PMS* include oxidation, ring-opening, bond cleavage, and epoxidation reactions. The toxicity assessment results showed that most products were less toxic than the parent compounds. Moreover, the Mn(II)/PICA/PMS system showed resilience to water matrices and high efficiency in real water environments. Notably, PICA-Mn(IV)* exhibited greater stability and a longer lifespan than traditional reactive oxygen species, enabling repeated utilization. Overall, this study developed an innovative, sustainable, and selective oxidation system, i.e., Mn(II)/PICA/PMS, for rapid water decontamination, highlighting the critical role of in situ generated Mn(IV).

Synergistic enhancement of microbes-to-pollutants and inter-microbes electron transfer by Fe, N modified ordered mesoporous biochar in anaerobic digestion

Extracellular electron transfer was essential for degrading recalcitrant pollutants by anaerobic digestion (AD). Therefore, existing studies improved AD efficiency by enhancing the electron transfer from microbes-to-pollutants or inter-microbes. This study synthesized a novel Fe, N co-doped biochar (Fe, N-BC), which could enhance both the microbes-to-pollutants and inter-microbes electron transfer in AD. Detailed characterization data indicated that Fe, N-BC has an ordered mesoporous structure, high specific surface area (463.46 m2/g), and abundant redox functional groups (Fe2+/Fe3+, pyrrolic-N), which translate into excellent biocompatibility and electrochemical properties of Fe, N-BC. By adding Fe, N-BC, the stability and efficiency of the medium-temperature AD system in the treatment of methyl orange (MO) wastewater were improved: obtained a high degradation efficiency of MO (96.8 %) and enhanced the methane (CH4) production by 65 % compared to the control group. Meanwhile, Fe, N-BC reduced the accumulation of volatile fatty acids in the AD system, and the activity of anaerobic granular sludge electron transport system and coenzyme F420 was enhanced. In addition, Fe, N-BC showed positive enrichment of azo dyes decolorization bacteria (Georgenia) and direct interspecies electron transfer (DIET) synergistic partners (Syntrophobacter, Methanosarcina). Overall, the rapid degradation of MO and enhanced CH4 production in AD systems by Fe, N-BC is associated with enhancing two electronic pathways, i.e., microbes to MO and DIET between syntrophic bacteria and methanogenic archaea. This study introduced an enhanced "two-pathways of electron transfer" theory, realized by Fe, N-BC. These findings provided new insights into the interactions within AD systems and offer strategies for enhancing their performance with recalcitrant pollutants.

Fenton-conditioning of landfill leachate biological sludge enables biochar for efficient Cr(Ⅵ)removal: Occurrence of oxygen-centered free radicals

Fenton-conditioning is commonly used to improve dewatering ability for municipal biological sludge, however, its application in industries is scarce. In this study, biochar (FT-BC) was successfully synthesized from a Fenton-conditioned landfill leachate biological sludge under oxygen-limited. As compared to the corresponding blank and poly ferric-pretreated biochars (BC and PF-BC), moderate Fenton conditioning of the sludge could enable good removal performance for Cr (Ⅵ) by FT-BC. It was found that the oxygen central free radicals (OCFRs) on the biochar surface was intensively promoted due to Fenton electrophilic addition of ·OH onto the oxygen-containing functional groups in biomass. The amounts of OCFRs correlated positively well with the removal efficiency, indicating these persistent free radicals (PFRs)would mainly responsible for the reductive immobilization of Cr(VI)on the FT-BC surface. This study is expected to provide a new method for reclamation of industrial biological sludges with poor agglomeration by introducing simple Fenton pre-conditioning.

Simultaneous elimination of antibiotic-resistant bacteria and antibiotic resistance genes by different Fe-N co-doped biochars activating peroxymonosulfate: The key role of pyridine-N and Fe-N sites

The coexistence of antibiotic resistance genes (ARGs) and antibiotic-resistant bacteria (ARB) in the environment poses a potential threat to public health. In our study, we have developed a novel advanced oxidation process for simultaneously removing ARGs and ARB by two types of iron and nitrogen-doped biochar derived from rice straw (FeN-RBC) and sludge (FeN-SBC). All viable ARB (approximately 108 CFU mL-1) was inactivated in the FeN-RBC/ peroxymonosulfate (PMS) system within 40 min and did not regrow after 48 h even in real water samples. Flow cytometry identified 96.7 % of dead cells in the FeN-RBC/PMS system, which verified the complete inactivation of ARB. Thorough disinfection of ARB was associated with the disruption of cell membranes and intracellular enzymes related to the antioxidant system. Whereas live bacteria (approximately 200 CFU mL-1) remained after FeN-SBC/PMS treatment. Intracellular and extracellular ARGs (tetA and tetB) were efficiently degraded in the FeN-RBC/PMS system. The production of active species, primarily •OH, SO4•- and Fe (IV), as well as electron transfer, were essential to the effective disinfection of FeN-RBC/PMS. In comparison with FeN-SBC, the better catalytic performance of FeN-RBC was mainly ascribed to its higher amount of pyridine-N and Fe0, and more reactive active sites (such as CO group and Fe-N sites). Density functional theory calculations indicated the greater adsorption energy and Bader charge, more stable Fe-O bond, more easily broken OO bond in FeN-RBC/PMS, which demonstrated the stronger electron transfer capacity between FeN-RBC and PMS. To encapsulate, our study provided an efficient and dependable method for the simultaneous elimination of ARGs and ARB in water.

Construction of an S-scheme electron transfer channel in Cu0/CuFe2O4 magnetic plate column reactor for the LEV degradation: New strategy of visible Photo-Fenton system application

The complicated loading process and easy falling off of powder catalysts still restrict the wide application of Photo-Fenton technology in practical water treatment. In this study, a magnetic fixed film plate column water treatment equipment is designed as a visible Photo-Fenton reactor to remove levofloxacin (LEV). The effect of magnetic force can ensure that the catalyst is firmly fixed, and the multi-level shallow column plate structure achieves full contact and efficient reaction between the catalyst and wastewater. Simultaneously, the Cu0/CuFe2O4 (STCCF) utilizes Cu0 to construct an S-scheme electron transfer channel, which improves the separation efficiency of photo-generated carriers and provides sufficient photo-generated electrons for the reduction of Fe (Ⅲ) and Cu (Ⅱ). The pseudo-first-order reaction kinetic constant k for the degradation of LEV in the visible Photo-Fenton system is 0.0349 min-1, which is 15.9 times that of the photocatalytic system and 4.8 times that of the Fenton system. After continuous operation for 72 h, the magnetic fixed film plate column reactor can still remove more than 90 % of LEV and 82 % of COD in the secondary effluent of simulated antibiotic pharmaceutical wastewater treatment process, and the effluent is stable and meets the standard. The magnetic fixed film plate column reactor can be used for advanced treatment of antibiotic pharmaceutical wastewater. This study provides a new insight into the application of the Photo-Fenton process.

Cu/N co-doped biochar activating PMS for selective degrading paracetamol via a non-radical pathway dominated by singlet oxygen and electron transfer

The non-free radical oxidation pathway (PMS-NOPs) of peroxymonosulfate (PMS) holds significant promise for practical wastewater treatment applications, owing to its low oxidation potential, high PMS utilization rate, and robust anti-interference capability in the degradation of pollutants. A novel activator copper nitrogen co-doped porous biochar (Cu-N-BC) with rich defect edges and functional groups was obtained by adding Cu and N to the biochar matrix generated by sodium alginate through pyrolysis in this study. Under the condition of 1 mM PMS, 30 mg/L activator was used to activate PMS and achieve efficient degradation of 10 mg/L paracetamol (PCT) within 15 min, with a high reaction rate constants (kobs) of 0.391 min-1. The activation mechanism of the Cu-N-BC/PMS/PCT system was a non-radical activation pathway with the dominance of singlet oxygen (1O2) and the presence of catalyst-mediated electron transfer. The graphite nitrogen, pyridine nitrogen, and Cu-N coordination introduced by Cu/N co-doping, as well as the carbon skeleton and CO functional group of biochar, were considered active sites that promote the 1O2 generation. The Cu-N-BC/PMS system exhibits strong stability, eco-friendliness, effective mineralization, and interference resistance across diverse pH levels (3-11) and interfering ions, including Cl-, H2PO4-, NO3-, SO42-, and humic acid. Remarkably, it efficiently degrades PCT in tap and lake water, achieving a notable 63.73% TOC mineralization rate, with leached copper ions below 0.02 mg/L. This research introduces a novel method for obtaining metal nitrogen carbon activators and enhances understanding of PMS non-radical activation pathways and active sites.

Highly efficient targeted adsorption and catalytic degradation of ciprofloxacin by a novel molecularly imprinted bimetallic MOFs catalyst for persulfate activation

Given the presence of emerging pollutants at low concentrations in water bodies, which are inevitably affected by background substances during the removal process. In this study, we synthesized molecularly imprinted catalysts (Cu/Ni-MOFs@MIP) based on bimetallic metal-organic frameworks for the targeted degradation of ciprofloxacin (CIP) in advanced oxidation processes (AOPs). The electrostatic interaction and functional group binding of CIP with specific recognition sites on Cu/Ni-MOFs@MIP produced excellent selective recognition (Qmax was 14.82 mg g-1), which enabled the active radicals to approach and remove the contaminants faster. Electron paramagnetic resonance (EPR) analysis and quenching experiments revealed the coexistence of ∙OH, SO42-, and 1O2, with ∙OH dominating the system. Based on experimental and theoretical calculations, the reaction sites of CIP were predicted and the possible degradation pathways and mechanisms of Cu/Ni-MOFs@MIP/PMS systems were proposed. This study opens up a new platform for the targeted removal of target pollutants in AOPs.

Fe-N co-doped biochar derived from biomass waste triggers peracetic acid activation for efficient water decontamination

In this study, the porous carbon material (FeN-BC) with ultra-high catalytic activity was obtained from waste biomass through Fe-N co-doping. The prominent degradation rate (> 96.8%) of naproxen (NAP) was achieved over a wide pH range (pH 3.0-9.0) in FeN-BC/PAA system. Unlike previously reported iron-based peracetic acid (PAA) systems with •OH or RO• as the dominated reactive species, the degradation of contaminants was attributed to singlet oxygen (1O2) produced by organic radicals (RO•) decomposition, which was proved to be thermodynamically feasible and favorable by theoretical calculations. Combining the theoretical calculations, characteristic and experimental analysis, the synergistic effects of Fe and N were proposed and summarized as follows: i) promoted the formation of extensive defects and Fe0 species that facilitated electron transfer between FeN-BC and PAA and continuous Fe(II) generation; ii) modified the specific surface area (SSA) and the isoelectric point of FeN-BC in favor of PAA adsorption on the catalyst surface. This study provides a strategy for waste biomass reuse to construct a heterogeneous catalyst/PAA system for efficient water purification and reveals the synergistic effects of typical metal-heteroatom for PAA activation.

Non-radical activation of low additive periodate by carbon-doped boron nitride for acetaminophen degradation: Significance of high-potential metastable intermediates

Metal-free environmental-friendly and cost-effective catalysts for periodate (PI) activation are crucial to popularize their application for micropollutant removal in water. Herein, we report that carbon-doped boron nitride (C-BN) can efficiently activate PI to degrade acetaminophen under very low oxidant doses (40 μM) and over a relatively wide pH range (3-9). As expected, the significant reduction in periodate addition is likely to be due to the higher chemical utilization efficiency achieved by a non-radical oxidation pathway. This involved two main mechanisms, the electron transfer process mediated by the high-potential metastable C-BN-900-PI* complex and singlet oxygen. In this case, the CO groups and defects on the C-BN surface were identified as key active sites for PI activation. Notably, the prepared C-BN-900 had good cycling performance and the degradation efficiency is recovered after simple annealing. The existence of HCO3- and HA significantly inhibited the reaction, whereas Cl-, SO42-, and NO3- had little effect on the degradation of ACE. Overall, this study provides a new alternative method to regulate the non-radical pathway of boron nitride/periodate system.

Efficient carbamazepine degradation by modified copper tailings and PMS system: Performance evaluation and mechanism

It is a green and sustainable path to establish cheap solid waste-based catalyst to establish peroxymonosulfate (PMS) catalytic system for the degradation of carbamazepine (CBZ) in water. In this study, durable copper tailing waste residue-based catalyst (CSWR) was prepared, and efficient CSWR/PMS system was constructed for catalytic degradation of CBZ for first time. The morphology and structure of CSWR changed from clumps to porous and loose amorphous by alkali leaching and medium temperature calcination. The reconstructed surface of the CSWR exposes more active sites promotes the catalytic reaction and increases the degradation rate of CBZ by more than 39.8 times. And the CSWR/PMS achieved a CBZ removal of nearly 99.99 % in 20 min. In particular, perovskite-type iron-calcium compounds were formed, which stimulated the production of more HO• and SO4•- in the system. DFT calculation shows that CSWR has stronger adsorption energy and electron transfer ability to PMS molecules, which improved the degradation efficiency of the system. In general, this study proposed a means of high-value waste utilization, which provided a new idea for the preparation of solid waste based environmental functional materials and is expected to be widely used in practical wastewater treatment.

One-step synthesis of ferrous disulfide and iron nitride modified hydrochar for enhanced adsorption and reduction of hexavalent chromium in Bacillus LD513 by promoting electron transfer and microbial metabolism

Microbial immobilization technology is effective in improving bioremediation efficiency and heavy metal pollution. Herein, Bacillus LD513 with hexavalent chromium (Cr(VI)) tolerance was isolated and immobilized on a novel ferrous disulfide (FeS2)/iron nitride (FeN) modified hydrochar (Fe3-SNHC) prepared from waste straws. The prepared Fe3-SNHC-based LD513 (FeLD) significantly improves Cr(VI) adsorption and reduction by 31.4 % and 15.7 %, respectively, compared to LD513 alone. Furthermore, the FeLD composite system demonstrates efficient Cr(VI) removal efficiency and good environmental adaptability under different culture conditions. Microbial metabolism and electrochemical analysis indicate that Fe3-SNHC is an ideal carrier for protecting LD513 activity, promoting extracellular polymer secretion, and reducing oxidative stress. Additionally, the carrier serves as an electron shuttle that accelerates electron transfer and promotes Cr(VI) reduction. Overall, FeLD is an environmentally friendly biocomposite that shows good promise for reducing Cr(VI) contamination in wastewater treatment.

One-step synthesis of iron and nitrogen co-doped porous biochar for efficient removal of tetracycline from water: Adsorption performance and fixed-bed column

Here, Fe/N co-doped porous biochars (FeNKBCs) were obtained by grinding corncob, CH3COOK, FeCl3·6H2O, and C3H6N6 via one-step synthesis and were applied to remove antibiotics from wastewater. Notably, CH3COOK had an excellent porous activation ability. The developed nanotubular structure of Fe1N2KBC had a high pore volume (Vtotal) (1.2131 cm3/g) and specific surface areas (SSA) (2083.54 m2/g), which showed outstanding sorption abilities for TC (764.35 mg/g), OTC (560.82 mg/g), SMX (291.45 mg/g), and SMT (354.65 mg/g). The adsorption process of TC was controlled by chemisorption. Moreover, Fe1N2KBC has an excellent dynamic adsorption performance (620.14 mg/g) in a fixed-bed column. The properties of SSA, Vtotal, and the content of graphite N and Fe-N were positively correlated with TC adsorption capacity. The high performance of TC removal was related to π-π stacking, pore-filling, hydrogen bond, and electrostatic interaction. Fe1N2KBC possessed stable sorption amounts in pH 2-12 and actual water, and well reuse performance. The results of this work present an effective preparation method of Fe/N porous biochar for TC-contaminated water remediation.

Synchronously improved permeability, selectivity and fouling resistance of Fe-N-C functionalized ceramic catalytic membrane for effective water treatment: The critical role of Fe

Constructing catalytic membrane simultaneously displaying high permeability, selectivity and antifouling performance in water treatment remains challenging. Herein, the surface and pore channels of the ceramic membrane were co-functionalized with nitrogen doped carbon supported Fe catalyst (CN-F), and the Fe content was varied to investigate its effect on performance of CN-F coupled with peroxymonosulfate (PMS) activation (CN-F/PMS) for water treatment. Results confirmed the introduced Fe (in Fe-N coordination form) greatly enhanced the permeability, selectivity and fouling resistance of CN-F. Optimal CN-F3/PMS achieved 96.5% removal and 52.1% mineralization of sulfamethoxazole in short retention duration (2.7 min), whose performance was 5.4 and 6.7 times higher than that of nitrogen doped carbon functionalized ceramic catalytic membrane (CN/PMS) and CN-F3 filtration alone, respectively. CN-F3/PMS also efficiently inhibited fouling on both surface and pores with 2.8 and 2.4 times lower flux loss than that of CN/PMS and CN-F3 filtration alone, respectively. Moreover, CN-F3/PMS displayed superior performance in long-term treatment of real coking wastewater. The outstanding performance of CN-F was mainly attributed to the dual role of supported Fe, which served as hydrophilic site for enhanced water permeation and major active site for PMS adsorption and reduction into reactive species (mainly high-valent Fe(IV)=O species) towards pollutant elimination.

Size-matched hierarchical porous carbon materials anchoring single-atom Fe-N4 sites for PMS activation: An in-depth study of key active species and catalytic mechanisms

Single-atom catalysts are considered to be one of the most promising catalysts for AOPs. However, how to design and synthesize cost-effective and highly loaded single-atom catalysts is the bottleneck limiting its development and application. In this study, we report a highly loaded single-atom iron catalyst (Fe-SAC-BC) using waste biomass as a carbon carrier to anchor Fe-N4 sites. The catalyst showed excellent catalytic performance and stability in wastewater treatment. Unlike conventional radical oxidation, the non-radical degradation process of Fe-N4 as the active site and high-valent iron-oxygen intermediates as the key active species identified by burst and probe experiments. DFT calculations and molecular dynamics simulations were applied to the catalytic mechanism of Fe-SAC-BC, in which Fe (III)-N4 is the most likely active site and Fe (IV)-OH is the most dominant active species. This study provides new strategies and understanding for the design of novel single-atom catalysts and the mechanistic probing of the non-radical pathways of AOPs.

Rational design of animal-derived biochar composite for peroxymonosulfate activation: Understanding the mechanism of singlet oxygen-mediated degradation of sulfamethoxazole

Animal-derived biochar are identified as a promising candidate for peroxymonosulfate (PMS) activation due to the abundant aromatics and oxygen-containing functional groups. The current investigation focuses on pig carcass-derived biochar (800-BA-PBC) by ball milling-assisted alkali activation. The results showed that 800-BA-PBC could effectively activate PMS and degraded 94.2% sulfamethoxazole (SMX, 10 mg/L) within 40 min. The reaction rate constant was found to be 47 times higher than that observed with PBC. The enhanced catalytic activity is mainly attributed to the increase in specific surface area, the increase content of oxygen-containing groups on the surface, and the formation of graphitic nitrogen. The quenching tests and electron paramagnetic resonance (EPR) analysis demonstrated that 1O2 is the main active species in the degradation of SMX. Moreover, the 800-BA-PBC + PMS system can maintain excellent degradation rate under different water quality, wide pH range, and the presence of different anions. The degradation pathways of SMX in the optimal system are also evaluated through intermediate identification and DFT calculation. These results indicate that the catalytic system has high anti-interference ability and practical application potential. This investigation provides new insight into the rational design of animal-derived biochar and develops a low-cost technology for the treatment of antibiotic containing wastewater.

Enhanced methane oxidation efficiency by digestate biochar in landfill cover soil: Microbial shifts and carbon metabolites insights

The ability of biochar to enhance the oxidation of methane (CH4) in landfill cover soil by promoting the growth and activity of methane-oxidizing bacteria (MOB) has attracted significant attention. However, the optimal characteristics of digestate-derived biochar (DBC) for promoting the MOB community and CH4 removal performance remain unclear. This study examined how the CH4 oxidation capacity and respiratory metabolism of MOB life process are affected by the application of DBC compared with the most commonly used woody-derived biochar (WBC). The addition of both WBC and DBC enhanced CH4 oxidation, with DBC exhibiting a nearly twofold increase in cumulative CH4 oxidation mass (7.14 mg CH4 g-1) compared to WBC. The high ion-exchange capacity of DBC was found to be more favorable for the growth of Type I MOB, which have more efficient metabolic pathways for CH4 oxidation. Type I MOB which are abundant in DBC may prefer monovalent positive ions, while the charge-rich nature of DBC may also have hindered extracellular protein aggregation. The superiority of DBC in terms of CH4 oxidation thus highlights the underlying mechanisms of biochar-MOB interactions, offering potential biochar options for landfill cover soil.

Ferrous disulfide and iron nitride sites on hydrochar to enhance synergistic adsorption and reduction of hexavalent chromium

In this study, a novel hydrochar containing ferrous disulfide (FeS2) and iron nitride (FeN) was prepared via a one-pot hydrothermal method to enhance the synergistic adsorption and reduction of hexavalent chromium (Cr(VI)). This material (Fe3-SNHC) exhibited a Cr(VI) removal capacity of 431.3 mg·g-1 and high tolerance to coexisting anions at pH 2. Adsorption occurred via monolayer chemisorption. Variation in material structure and density functional theory calculations proved that multiple active sites formed by interactions between heteroatoms improved the chemical inertness of hydrochar. FeN and FeS2 with two electron-donating groups had strong reducing ability to facilitate the conversion of Cr(VI) to trivalent chromium. It was concluded that next to electrostatic adsorption and complexation, synergistic reduction among multiple active sites were the dominant mechanisms involved in the removal Cr(VI). This study shows that Fe3-SNHC is a promising and environment-friendly material for Cr(VI) to remove it from wastewater.

Magnetized algae catalyst by endogenous N to effectively trigger peroxodisulfate activation for ultrafast degraded sulfathiazole: Radical evolution and electron transfer

An innovative Fe-N co-coupled catalyst MN-2 was prepared from waste spirulina by co-pyrolysis as a highly active carbon-based catalyst for the activation of peroxydisulfate (PDS) for the degradation of sulfathiazole (ST). The protein-rich raw material Spirulina provided sufficient N during the pyrolysis process, thus achieving N doping without an additional nitrogen source, optimizing the interlayer structure of the biochar material and effectively inhibiting the leaching of the ligand metal Fe. MN-2 showed highly efficient catalytic activity for peroxydisulfate (PDS), with a degradation efficiency of 100% for ST within 30 min and a kinetic constant (kobs) reached 0.306 min-1, benefiting from the excellent adsorption ability of MN-2 forming MN-2-PDS* complexes and the electron transfer process generated by Fe3+ and Fe2+ cycling, oxygen-containing functional groups. The effects of PDS dosage, initial pH and coexisting anions on the oxidation process were also investigated. Free radical quenching, electron paramagnetic resonance and electrochemical measurements were employed to explain the hydroxyl (·OH) and sulfate (SO4·-) as the dominant active species and the electron transfer effect on the removal of ST. MN-2 maintained a ST removal rate of 84% after four recycling experiments, showing a high reusability performance. This work provides a simple way to prepare magnetized N-doped biochar, a novel catalyst (MN-2) for efficient activation of PDS for ST degradation, and a feasible method for removing sulfanilamide antibiotics in water environment.

Target-prepared sludge biochar-derived synergistic Mn and N/O induces high-performance periodate activation for reactive iodine radicals generation towards ofloxacin degradation

Converting waste activated sludge into catalysts for the removal of antibiotics in water fulfils the dual purpose of waste-to-resource and hazardous pollution elimination. In this study, sludge-derived biochar (SDB) for efficient periodate (PI) activation was first prepared via one-step pyrolysis of potassium permanganate-polyhexamethylenebiguanide conditioned sludge without additional modification. The SDB (750 °C)-PI system degraded 100% ofloxacin (OFL, 41.5 μM) within 6 min and was almost undisturbed by inorganic ions or humic acids. The experimental results confirmed that the predominant role of reactive iodine species (RIS) and the auxiliary involvement of singlet oxygen (1O2) jointly contributed to the OFL degradation. Theoretical calculations further indicated that the synergy between Mn and N/O induced local charge redistribution and improved electron transfer capability of SDB, leading to the formation of electron-rich Mn sites and enhanced Mn(II)↔Mn(III)↔Mn(IV) redox to promote PI activation. More importantly, the enhanced adsorption and charge transfer of PI on the Mn site of the Mn-N/O-C structures induced the I-O bond stretching and the rapid generation of RIS. This study offered a cost-effective strategy for developing SDB-based catalysts, further advancing the comprehension of sludge management and the intricate mechanisms underlying RIS formation in PI-advanced oxidation processes.

Atomic hydrogen-mediated enhanced electrocatalytic hydrodehalogenation on Pd@MXene electrodes

In this study, a Pd@MXene catalyst was synthesized to enhance the electrocatalytic hydrodehalogenation (ECH) of emerging halogenated organic pollutants (HOPs) by improving the dispersibility, catalytic activity, and stability of palladium (Pd). The average size of Pd nanoparticles (NPs) was reduced to 3.62 ± 0.34 nm with a more intensive peak of Pd (111), which facilitated atomic hydrogen (H*) production. The Pd@MX/CC electrode demonstrated superior ECH activity for diclofenac (DCF) degradation, with a reaction rate constant (kobs) 2.48 times higher than that of Pd/CC (without MXene). The satisfactory ECH performance of Pd@MX/CC remained consistent within a wide range of initial DCF concentrations (5-100 mg/L), and no significant ECH attenuation was observed even after up to 10 batches. Furthermore, the high activity of Pd@MX/CC was also observed in the ECH of other halogenated organic pollutants (levofloxacin, tetrabromobisphenol A, and diatrizoate). Density functional theory (DFT) calculations revealed that electronic configuration modulation of the Pd@MXene catalyst optimized binging energies to H* , DCF, and dechlorinated products, thereby enhancing the ECH efficiency of DCF.

Nitrogen-rich magnetic biochar prepared by urea was used as an efficient catalyst to activate persulfate to degrade organic pollutants

In order to fully exploit the potential of magnetic biochar-based persulfate (PS) systems, N was utilized to modify the magnetic biochar-based catalysts through impregnation-pyrolysis method. A typical antifungal drug, metronidazole (MNZ), is selected as the target pollutant to score the reactivity of as-synthetic nitrogen-rich magnetic biochar (NMBC) catalysts. In the modified system, 99.6% of MNZ was removed, 13.6 times of that in the unmodified system. Active radical verification experiments showed that 1O2 was the key active radical. Various characterization showed that the nitrogen-rich significantly improved the persistent free radical, defect degree, content of oxygen-containing groups, electrochemical conductivity and other catalytic activity related properties. Physicochemical characterization, Fe(II) semi-quantitative analysis and masking experiments confirmed that the doping of magnetic biochar with nitrogen increased its Fe(II) content (23.79 mg/g), approximately 2.6 times higher than that of pristine magnetic biochar. Moreover, N induces strong electron accretion of Fe atom through coordination bond, which leads to the increase of electron density on the Fe atom, which increases the content of Fe (II) in the material, thus improving the ability of the material to activate PS to generate 1O2, and promoting the degradation reaction of MNZ. This paper provides a method to improve the activation performance of magnetic biochar.

Simultaneous adsorption of ciprofloxacin and Cu2+ using Fe and N co-doped biochar: Competition and selective separation

The treatment of combined antibiotics and heavy metals pollution is a critical challenge. Herein, iron and nitrogen co-doped biochar (Fe/N-BC) was synthesized using rape straw as precursor, and applied for the adsorption of ciprofloxacin (CIP) and Cu2+ in single and binary systems. The qmax for CIP and Cu2+ were 46.45 mg g-1 and 30.77 mg g-1, respectively. Adsorption decreased in a binary matrix, indicating that there was a competitive effect between CIP and Cu2+, which might be due to CIP and Cu2+ sharing similar active adsorption sites on Fe/N-BC. Interestingly, CIP and Cu2+ co-adsorption was a pH-dependent process. Fe/N-BC has potential to highly selectively separate CIP/Cu2+ from mixed solutions through adjusting pH values. Furthermore, adsorption mechanisms were systematically investigated in this research. This research could help to provide a deeper understanding of the synchronously removing specific antibiotics and heavy metals by biochar adsorbents.

Efficient photo-Fenton reaction for tetracycline and antibiotic resistant bacteria removal using hollow Fe-doped In2O3 nanotubes: From theoretical research to practical application

The low exposure of active sites and the slow electron transfer rate still restrict the wide application of the photo-Fenton system of Fe-based photocatalyst in practical water treatment. Herein, we prepared a hollow Fe-doped In₂O₃ nanotube (h-Fe-In₂O₃) catalyst for activating hydrogen peroxide (H₂O₂) to remove tetracycline (TC) and antibiotic resistant bacteria (ARB). Incorporation of Fe could shorten the band gap and increase the absorption capacity of visible light. Meanwhile, the increase of electron density at the Fermi level promotes the interfacial electron transport. The large specific surface area of the tubular structure exposes more Fe active site and the Fe-O-In site reduces the energy barrier of H₂O₂ activation, resulting in more and faster formation of hydroxyl radicals (•OH). After continuous operation for 600 min, the h-Fe-In₂O₃ reactor still can remove 85% TC and about 3.5 log ARB in secondary effluent, showing good stability and durability for practical wastewater treatment.

Inorganic Skeleton Reinforcement-A Generic Approach to Improve the Mechanical Properties of Biochar

Biochar is considered as a promising candidate for emerging sustainable energy systems and environmental technology applications. However, the improvement of mechanical properties remains challenges. Herein, we propose a generic strategy to enhance the mechanical properties of bio-based carbon materials through inorganic skeleton reinforcement. As a proof-of-concept, silane, geopolymer, and inorganic gel are selected as precursors. The composites' structures are characterized and an inorganic skeleton reinforcement mechanism is elucidated. Specifically, two types of reinforcement of the silicon-oxygen skeleton network formed in situ with biomass pyrolysis and the silica-oxy-al-oxy network are constructed to improve the mechanical properties. A significant improvement in mechanical strength was achieved for bio-based carbon materials. The compressive strength of well-balanced porous carbon materials modified by silane can reach up to 88.9 kPa, geopolymer-modified carbon material exhibits an enhanced compressive strength of 36.8 kPa, and that of inorganic-gel-polymer-modified carbon material is 124.6 kPa. Moreover, the prepared carbon materials with enhanced mechanical properties show excellent adsorption performance and high reusability for organic pollutant model compound methylene blue dye. This work demonstrates a promising and universal strategy for enhancing the mechanical properties of biomass-derived porous carbon materials.

Insight into boron-doped biochar as efficient metal-free catalyst for peroxymonosulfate activation: Important role of -O-B-O- moieties

In recent years, metal-free catalysts for persulfate-mediated oxidation processes have been widely applied to remove contaminants in the aquatic environment. Herein, a simple pyrolysis approach was used to synthesize the boron doped biochars (B@TBCs) derived from boric acid mixed with tea seed shells powders. The obtained B@TBCs exhibited fantastic capability to boost PMS (0.5 mM) activation for 90%∼ removal of oxytetracycline (OTC) within 20 min. Through the correlation analysis and DFT calculations, it was concluded that the apparent rate constant of pollutants removal was greatly related to the -O-B-O- groups on the biochars, which could improve the electron-donating capacity of the biochar. In addition, the degradation process of OTC was pH-dependent because of the changed roles of ROSs under different pH. Finally, according to the DFT calculation, LC-MS and toxicological analysis, the degradation pathways of pollutants and the toxicity changes during the degradation process were obtained. These findings consolidated the theoretical basis for further boosting the catalytic activity of B-doped biochars and expanded the imagination for the modification of other metal-free biochar catalysts for PMS activation.

Cobalt and nitrogen co-doped monolithic carbon foam for ultrafast degradation of emerging organic pollutants via peroxymonosulfate activation

Cobalt-based catalysts are expected as one of the most promising peroxymonosulfate (PMS) activators for the removal of organic pollutants from industrial wastewater. However, the easy agglomeration, difficult separation, and secondary pollution of cobalt ions limit their practical application. In this study, a novel, highly efficient, reusable cobalt and nitrogen co-doped monolithic carbon foam (Co-N-CMF) was utilized to activate PMS for ultrafast pollutant degradation. Co-N-CMF (0.2 g/L) showed ultrafast catalytic kinetics and higher total organic carbon (TOC) removal efficiency. Bisphenol A, ciprofloxacin, 2,4-dichlorophenoxyacetic acid, and 2,4-dichlorophenol could be completely degraded after 2, 4, 5, and 5 min, and the TOC removal efficiencies were 77.4 %, 68.9 %, 72.8 %, and 79.8 %, respectively, corresponding to the above pollution. The sulfate radical (SO4•-) was the main reactive oxygen species in Co-N-CMF/PMS based on electron paramagnetic resonance. The ecological structure-activity relationship program analysis via the quantitative structure activity relationship analysis and phytotoxicity assessment revealed that the Co-N-CMF/PMS system demonstrates good ecological safety and ecological compatibility. The Co-N-CMF catalyst has good catalytic activity and facile recycling, which provides a fine method with excellent PMS activation capacity for 2,4-dichlorophenol elimination from simulated industrial wastewater. This study provides new insights into the development of monolithic catalysts for ultrafast wastewater treatment via PMS activation.