The safety of chitosan as a pharmaceutical excipient

In Vitro and in vivo characterization of nasal pH-Responsive in-situ hydrogel of Candesartan-loaded invasomes as a potential stroke treatment

Candesartan (CDN) is a useful anti-stroke medication because it lowers blood pressure, inflammation, oxidative stress, angiogenesis and apoptosis. However, CDN has limited efficacy due to its low solubility and poor bioavailability. This study set out to develop nasal pH-responsive in situ hydrogel of CDN-loaded invasomes a (PRHCLI) for enhancing CDN's release, penetration, bioavailability, and effectiveness as a possible treatment for stroke. Based on the results of the pre-formulation investigation, the optimum CLI formulation for intravasomal delivery of CDN was determined to be 3% of phospholipid, 0.16% of cholesterol, 3% of ethanol, and 1% of cineole. The optimum formulation significantly enhanced CDN permeation and release by 2.06-fold and 59.06%, respectively. The CLI formulation was added to a mixture of chitosan (0.67%w/v) and glyceryl monooleate (0.27%v/v) to develop PRHCLI. The PRHCLI formulation enhanced the release and permeation of CDN relative to free CDN by 2.15 and 2.76 folds, respectively. An experimental rat stroke model was utilized for in vivo studies to evaluate the bioavailability, effectiveness, and toxicity of the PRHCLI formulation. The nasal PRHCLI drops increased the CDN's bioavailability by 3.20-fold compared to oral free CDN. Increased grip strength and decreased flexion, spontaneous motor activity, and Morris Water Maze scores in comparison to oral free CDN showed that nasal PRHCLI drops have better anti-stroke activity. The toxicity evaluation revealed the safety of nasal PRHCLI. Hence, nasal PRHCLI drops may represent a promising avenue as a stroke therapy.

Changes in gut microbiota following supplementation with chitosan in adolescents with overweight or obesity: a randomized, double-blind clinical trial

BACKGROUND

Overweight and obesity have been associated with an altered intestinal microbiome. Recent investigations have demonstrated that fiber supplementation, including chitosan, can exert beneficial and protective effects on the composition of gut microbiota in humans diagnosed with overweight/obesity. However, there is still a great deal of heated debate regarding the impact of chitosan supplementation in overweight and obese adolescents. Therefore, the aim of this study is to clarify the effects of chitosan administration on the composition of the gut microbiome in overweight and obese adolescents.

METHODS AND ANALYSIS

Sixty-four overweight and obese adolescents were subjected to supplementation with 3 g of chitosan for 12 weeks. Anthropometric indices and physical activity were measured at the beginning and at the end of the intervention. After DNA extraction and purification, the quantity of bacteria in the patients' stool samples was determined by real-time polymerase chain reaction (PCR). The RCT was registered on the Iranian Registry of Clinical Trials ( www.irct.ir ) website (IRCT20091114002709 N57; registration date: 2021 - 06 - 20).

RESULTS

Individuals who received chitosan supplementation experienced a significant decrease in the BMI z-score (P < 0.001). Administration of chitosan led to notable significant decrease in the Firmicutes (P < 0.001) populations and the ratio of Firmicutes to Bacteroidetes (P < 0.001) as well as a notable increase in the Bacteroidetes (P = 0.008) and Akkermansia (P < 0.001) populations, respectively compare to control group. Mean changes in Lactobacillus populations were marginally significant (P = 0.05). Chitosan administration did not alter the composition in Bifidobacterium populations (P = 0.97).

CONCLUSION

The present study demonstrates beneficial effects of chitosan administration on some bacterial species associated with overweight and obesity in adolescents. Further research is needed to confirm our findings and clarify the impact of this intervention on the Lactobacillus population in the gut.

Chitosan-based biomaterials for bone tissue engineering

Common critical size bone defects encountered in clinical practice often result in inadequate bone regeneration,primarily due to the extent of damage surpassing the inherent capacity of the body for self-healing. Bone tissue engineering scaffolds possess the desirable characteristics of biomimetic bone structure, simulated extracellular matrix, optimal mechanical strength, and biological functionality, rendering them the preferred option for the treatment of bone defects. Chitosan demonstrates favorable biocompatibility, plasticity, and a range of biological activities, rendering it a highly appealing material. Chitosan and its derivatives have been found to exert an impact on bone repair through their ability to modulate macrophage polarization, angiogenesis, and the delicate equilibrium of bone remodeling. However, the efficacy of pure chitosan is constrained, necessitating its combination with other bioactive substances to achieve an optimal biomimetic scaffold that is compatible with the specific bone defect site. Chitosan is commonly utilized in the field of bone repair in four different application forms: rigid scaffold, hydrogel, membranes, and microspheres. In order to enhance comprehension of the benefits and constraints associated with chitosan, this review provides a comprehensive overview of the structure and biological properties of chitosan, the molecular mechanisms by which chitosan promotes osteogenic differentiation, the diverse methods of chitosan preparation for various applications, and the impacts of chitosan when loaded with bioactive substances.

Implantable Dental Barrier Membranes as Regenerative Medicine in Dentistry: A Comprehensive Review

BACKGROUND

Periodontitis and bone loss in the maxillofacial and dental areas pose considerable challenges for both functional and aesthetic outcomes. To date, implantable dental barrier membranes, designed to prevent epithelial migration into defects and create a favorable environment for targeted cells, have garnered significant interest from researchers. Consequently, a variety of materials and fabrication methods have been explored in extensive research on regenerative dental barrier membranes.

METHODS

This review focuses on dental barrier membranes, summarizing the various biomaterials used in membrane manufacturing, fabrication methods, and state-of-the-art applications for dental tissue regeneration. Based on a discussion of the pros and cons of current membrane strategies, future research directions for improved membrane designs are proposed.

RESULTS AND CONCLUSION

To endow dental membranes with various biological properties that accommodate different clinical situations, numerous biomaterials and manufacturing methods have been proposed. These approaches provide theoretical support and hold promise for advancements in dental tissue regeneration.

Impact of polycaprolactone, alginate, chitosan and zein nanofiber physical properties on immune cells for safe biomedical applications

Nanofiber safety, especially immunogenicity, is important for their successful translation to clinical setting. This study provides a comprehensive evaluation of how nanofiber physical properties influence immune cells cultured on them, specifically peripheral blood mononuclear cells (PBMCs). We prepared nanofibers with a wide range of physical properties including various diameters, interfibrillar pore sizes and mat thicknesses, using four main polymers: polycaprolactone, alginate, chitosan, and zein. Our findings show that nanofiber diameters had only a marginal influence on the activity of immune cells, whereas interfibrillar nanofiber pore sizes had a significant effect, and mat thickness proved to have the greatest impact. Cells that penetrated deeper into the thick nanofiber mats ceased to proliferate but did not experience cytotoxicity. Moreover, we discovered that PBMCs penetrating the zein/PVP nanofiber mesh exhibited increased metabolic activity, indicating potential immunogenicity, whereas the other tested non-immunogenic nanofibers reduced it. To best of our knowledge, this study is the first to report on the impact of various nanofiber physical properties on in vitro immune cell behavior, thereby expanding the knowledge in the relatively unexplored field of nanofiber immunological safety. It underscores the need for rigorous preclinical nanofiber assessment and setting new standards for designing nanofiber-based biomedical products.

Thermal Compatibility of New ACEI Derivatives with Popular Excipients Used to Produce Solid Pharmaceutical Formulations

Background/Objectives: Increasing drugs' stability and adequately protecting them against degradation will ensure a decrease in their price and broader availability of pharmaceutical substances. This is of great importance, especially for drugs used to treat the most common diseases in the population, such as hypertension. The study examined two newly synthesized substances from the angiotensin I-converting enzyme inhibitor (ACEI) group as potential drugs. ACEIs are among the leading drugs used in the treatment of hypertension in the world. The chemical modifications of the tested substances applied concerned the places most susceptible to degradation. The presented work analyzed the compatibility of new derivatives with selected excipients used in pharmacy. Methods: Thermogravimetric (TGA) and differential thermal analyses (c-DTA) were used as the main methods. In addition, non-thermal methods such as colorimetry analysis, Fourier-transform infrared (FTIR) and UV spectroscopy were used. Results: Based on the conducted studies, it can be concluded that the incompatibility of IND-1 with glucose anhydrous and lactose monohydrate occurs only when the mixture is stored at higher temperatures. For the remaining IND-1 and IND-2 mixtures with excipients, compatibility was demonstrated. Conclusions: The obtained results confirmed the usefulness of the applied thermal analyses (TGA and c-DTA) for assessing the compatibility of the tested potential drugs with excipients. However, in the case of incompatibility reactions of substances occurring under the influence of elevated temperatures, such as the Maillard reaction, it is necessary to use non-thermal methods to obtain the right result.

Effectiveness of chitosan phonophoresis on ulnar nerve conduction velocity, pain relief, and functional outcomes for mild to moderate cubital tunnel syndrome: A double-blind randomized controlled trial

BACKGROUND

Cubital tunnel syndrome (CBTS) impairs hand function, with limited conservative options often leading to surgery. Chitosan neuroregenerative effects delivered via phonophoresis provide a rationale for testing this emerging treatment approach.

PURPOSE

The primary goal of this research was to assess the impact of chitosan phonophoresis on the conductivity of the ulnar nerve, as well as its effects on pain levels and functional outcomes in individuals diagnosed with mild to moderate CBTS.

STUDY DESIGN

Double-blind randomized controlled trial.

METHODS

This was a prospective, double-blinded, randomized controlled study. The participants consisted of 54 individuals aged between 20-35 years who were randomly assigned using block randomization. The control group (n = 27) received standard hand therapy alone, while the experimental group (n = 27) received both standard hand therapy and chitosan phonophoresis. Both groups underwent three treatment sessions per week, each lasting for 60-72 minutes, over a period of five weeks. Pre- and post-intervention evaluations included assessments of ulnar nerve conduction velocity (NCV), pain assessment using the numerical pain rating scale (NPRS), as well as hand function evaluated using the Quick Disabilities of Arm Shoulder Hand (QuickDASH) questionnaire.

RESULTS

After the intervention, the experimental group significantly improved in all outcome measures compared to the control group. Accordingly, ulnar NCV (MD = 2.233 m/sec; CI = 1.63:2.83; p < 0.001; η2p = 0.516), NPRS (MD = -1.11; CI = -1.71: -0.50; p < 0.001; η2p = 0.208) and QuickDASH (MD = -2.72; CI = -4.54:0.87; p < 0.007; η2p = 0.133).

CONCLUSIONS

The study findings suggest that chitosan phonophoresis may have the potential as a supplementary treatment to hand therapy for individuals with mild to moderate CBTS. This approach demonstrated significant improvements in nerve conduction, pain reduction, and enhancement of hand function.

Application of biomacromolecules encapsulation systems for the long-term storage of Lactobacillus plantarum F1 and Lactobacillus reuteri 182

The aim of this study was to improve the viability of lactic acid bacteria (LAB) during extended storage of 1 year and mechanical characteristics of the calcium alginate beads with co-encapsulation of prebiotics and chitosan coating and subsequent freeze drying. The results revealed that the addition of trehalose to alginate matrix effectively protects the LAB cells during freeze drying, i.e., the survival rate has increased up to more than 92.5 %. Chitosan coating reinforced Ca-alginate beads, therefore the sphericity and mechanical strength of the beads improved. The findings also showed that bacteria encapsulation with the prebiotics resulted in more cells stability during the prolonged storage of 1 year and were 4.82 ± 0.06 log CFU g-1 in the lyophilized alginate-trehalose beads for Lactobacillus plantarum and 5.64 ± 0.08 log CFU g-1 in the lyophilized alginate-trehalose-inulin beads for Lactobacillus reuteri. No survival, however, was noted for the LAB cells in wet capsules after the same period. This study demonstrated that prebiotics had a significant impact on the viability of cells during freeze drying and storage. What is more, physical properties of the alginate beads were enhanced by coating beads with the chitosan.

Evaluation of Cytotoxicity and Antimicrobial Activity of Experimental Composites Containing Chitosan-Silver Oxide Particles Against Two Main Pathogenic Bacteria in Periodontal Disease

INTRODUCTION

Bacterial biofilm is known as the main cause of periodontal disease. Generally, the anaerobic Gram-negative, such as Porphyromonas gingivalis and Fusobacterium nucleatum, are considered the most identified bacteria.

OBJECTIVE

This study aimed to investigate the antimicrobial effect and cytotoxicity of two experimental composites containing chitosan-silver oxide (CH-Ag2O) particles.

MATERIALS AND METHODS

Four experimental groups, including Ag2O and CH, along with two composites of CH-Ag2O 20 and CH-Ag2O 60 mg, were prepared. Antimicrobial activity was performed against Porphyromonas gingivalis (ATCC#33277) and Fusobacterium nucleatum (ATCC#25586) using the agar dilution method. Moreover, the cytotoxicity assay was performed on human gingival fibroblasts (HGF) by the use of the MTT method. The obtained data were analyzed with descriptive methods, one-way ANOVA, and Tukey's LSD tests.

RESULTS

The antibacterial activity of both composites was higher than both CH and Ag2O, and the greatest antibacterial properties were presented in CH-Ag2O 60. In all three measurements (24, 48, and 72 h), the greatest cytotoxicity was seen in Ag2O, followed by CH, CH-Ag2O 20, and CHAg2O 60 in descending order, respectively. The cytotoxicity of these components was related to the concentration and not to the time of exposure. The results showed that Ag2O in 3.7 and 7.5 μg/ml concentrations and CH-containing groups in 250 and 500 μg/ml were toxic to the cultured HGF.

CONCLUSION

The experimental composite containing CH-Ag2O 60 showed the greatest antibacterial properties against two periodontal pathogens evaluated. In order to clarify the clinical significance of composite cytotoxicity, further clinical studies are necessary.

Immunomodulatory chitosan nanoparticles for Toxoplasma gondii infection: Novel application of chitosan in complex propranolol-hydrochloride as an adjuvant in vaccine delivery

The study aimed to investigate the immunomodulatory effects of propranolol hydrochloride (PRO) in combination with chitosan nanoparticles (CS NPs) as an adjuvant to develop an effective vaccine against T. gondii. A total of 105 BALB/c mice were randomly divided into seven equal groups including PBS alone, CS NPs, SAG1 (Surface antigen 1), CS-SAG1 NPs, CS-PRO NPs, SAG1-PRO, and CS-SAG1-PRO NPs. The immunostimulatory effect of each adjuvant used for vaccine delivery was evaluated in a mice immunization model. The results showed that the mice immunized with CS-SAG1-PRO NPs exhibited the highest lymphocyte proliferation rate, along with increased secretion of IFN-γ, TNF-α, IL-6, IL-12, IL-17, and IL-23, as well as elevated levels of protective cytokines such as TGF-β, IL-27, and IL-10. Although, the CS-SAG1-PRO NPs immunized mice showed the highest level of T. gondii specific IgG compared to the other groups, a significant production of IgG2a and IgG1 was observed in the sera of mice immunized with the CS-SAG1-PRO NPs compared to the other group (p <0.001). The higher IgG2a/IgG1 ratio observed in the CS-SAG1-PRO NPs group indicates a bias towards Th1 cell polarization, suggesting the promotion of Th1 cell-mediated immune responses. Considering the combination of the highest lymphocyte proliferation and survival rates, IgG2a/IgG1 ratio, and cytokine levels in the mice immunized with CS-SAG1-PRO NPs, this approach holds promise for immunostimulation and vaccine delivery against T. gondii infection.

Chitosan as a Control Tool for Insect Pest Management: A Review

Chitosan, a polysaccharide derived from the deacetylation of chitin, is a versatile and eco-friendly biopolymer with several applications. Chitosan is recognized for its biodegradability, biocompatibility, and non-toxicity, beyond its antimicrobial, antioxidant, and antitumoral activities. Thanks to its properties, chitosan is used in many fields including medicine, pharmacy, cosmetics, textile, nutrition, and agriculture. This review focuses on chitosan's role as a tool in insect pest control, particularly for agriculture, foodstuff, and public health pests. Different formulations, including plain chitosan, chitosan coating, chitosan with nematodes, chitosan's modifications, and chitosan nanoparticles, are explored. Biological assays using these formulations highlighted the use of chitosan-essential oil nanoparticles as an effective tool for pest control, due to their enhanced mobility and essential oils' prolonged release over time. Chitosan's derivatives with alkyl, benzyl, and acyl groups showed good activity against insect pests due to improved solubility and enhanced activity compared to plain chitosan. Thus, the purpose of this review is to provide the reader with updated information concerning the use and potential applications of chitosan formulations as pest control tools.

Trends in biopolymer science applied to cosmetics

The term biopolymer refers to materials obtained by chemically modifying natural biological substances or producing them through biotechnological processes. They are biodegradable, biocompatible and non-toxic. Due to these advantages, biopolymers have wide applications in conventional cosmetics and new trends and have emerged as essential ingredients that function as rheological modifiers, emulsifiers, film-formers, moisturizers, hydrators, antimicrobials and, more recently, materials with metabolic activity on skin. Developing approaches that exploit these features is a challenge for formulating skin, hair and oral care products and dermatological formulations. This article presents an overview of the use of the principal biopolymers used in cosmetic formulations and describes their sources, recently derived structures, novel applications and safety aspects of the use of these molecules.

10-hydroxycamptothecin-loaded starch-based microcapsules with the stepwise responsive release strategy for targeted controlled release

Controlled and accurate drug release at the target site have been the focus of research. Especially in cancer therapy, economical, convenient and accurate delivery strategies could help to reduce the toxic effects of drugs on normal tissues and improve drug availability. In the study, glutathione (GSH)-responsive microcapsules (FA-RSMCs) were prepared by sonochemical method based on thiolated modified starch. 10-Hydroxycamptothecin (HCPT) was designed as a reactive oxygen species (ROS)-responsive polyprodrug (polyHCPT), which was loaded into the core of the microcapsules to obtain stepwise released drug delivery carriers. In the tumor microenvironment, FA-RSMCs first triggered GSH-responsive cleavage to release polyHCPT, followed by ROS-responsive cleavage of polyHCPT to release intact HCPT drug molecules. The results of experiments in simulated tumor microenvironment showed that FA-RSMCs exhibited good cascade-response release properties in vitro. It exhibited good anti-tumor ability and protection of normal cells in cytotoxicity in vitro. This strategy enhanced the accuracy and safety of targeted delivery of HCPT via microcapsules, which has potential for clinical application.

Shrinking the battlefield in cancer therapy: Nanotechnology against cancer stem cells

Cancer remains one of the leading causes of mortality worldwide, presenting a significant healthcare challenge owing to the limited efficacy of current treatments. The application of nanotechnology in cancer treatment leverages the unique optical, magnetic, and electrical attributes of nanomaterials to engineer innovative, targeted therapies. Specifically, manipulating nanomaterials allows for enhanced drug loading efficiency, improved bioavailability, and targeted delivery systems, reducing the non-specific cytotoxic effects characteristic of conventional chemotherapies. Furthermore, recent advances in nanotechnology have demonstrated encouraging results in specifically targeting CSCs, a key development considering the role of these cells in disease recurrence and resistance to treatment. Despite these breakthroughs, the clinical approval rates of nano-drugs have not kept pace with research advances, pointing to existing obstacles that must be addressed. In conclusion, nanotechnology presents a novel, powerful tool in the fight against cancer, particularly in targeting the elusive and treatment-resistant CSCs. This comprehensive review delves into the intricacies of nanotherapy, explicitly targeting cancer stem cells, their markers, and associated signaling pathways.

Effect of Chitosan on the Number of Streptococcus mutans in Saliva: A Meta-Analysis and Systematic Review

We conducted a meta-analysis and systematic review to investigate the efficacy of chitosan-containing chewing gums, and to test their inhibitory effects on Streptococcus mutans. The systematic search was performed in three databases (Cochrane Library, EMBASE, and PubMed) and included English-language randomized-controlled trials to compare the efficacy of chitosan in reducing the number of S. mutans. To assess the certainty of evidence, the GRADE tool was used. Mean differences were calculated with a 95% confidence interval for one outcome: bacterial counts in CFU/mL. The protocol of the study was registered on PROSPERO, registration number CRD42022365006. Articles were downloaded (n = 6758) from EMBASE (n = 2255), PubMed (n = 1516), and Cochrane (n = 2987). After the selection process, a total of four articles were included in the qualitative synthesis and three in the quantitative synthesis. Our results show that chitosan reduced the number of bacteria. The difference in mean quantity was -4.68 × 105. The interval of the random-effects model was [-2.15 × 106; 1.21 × 106] and the prediction interval was [1.03 × 107; 9.40 × 106]. The I2 value was 98% (p = 0.35), which indicates a high degree of heterogeneity. Chitosan has some antibacterial effects when used as a component of chewing gum, but further studies are needed. It can be a promising antimicrobial agent for prevention.

Alkylated chitosan-attapulgite composite sponge for rapid hemostasis

This study reported the development of a composite sponge (ACATS) based on alkylated chitosan (AC) and attapulgite (AT) for rapid hemostasis. The well-designed ACATS, with an optimal AC N-alkylation of 5.9 % and an optimal AC/AT mass ratio of 3:1, exhibited a hierarchical porous structure with a favorable biocompatibility. The ACATS can effectively and rapidly stop the uncontrolled bleeding in 235 ± 64 s with a total blood loss of 8.4 ± 4.0 g in comparison with those of Celox as a positive control (602 ± 101 s and 22.3 ± 2.4 g, respectively) using rabbit carotid artery injury model in vivo. ACATS could rapidly interact with blood and its components, including platelets (PLs), red blood cells (RBCs), and coagulation factors, resulting in these blood components rapidly accumulation and the following thrombus formation and coagulation factors activation.

A novel N95 respirator with chitosan nanoparticles: mechanical, antiviral, microbiological and cytotoxicity evaluations

BACKGROUND

It is known that some sectors of hospitals have high bacteria and virus loads that can remain as aerosols in the air and represent a significant health threat for patients and mainly professionals that work in the place daily. Therefore, the need for a respirator able to improve the filtration barrier of N95 masks and even inactivating airborne virus and bacteria becomes apparent. Such a fact motivated the creation of a new N95 respirator which employs chitosan nanoparticles on its intermediate layer (SN95 + CNP).

RESULTS

The average chitosan nanoparticle size obtained was 165.20 ± 35.00 nm, with a polydispersity index of 0.36 ± 0.03 and a zeta potential of 47.50 ± 1.70 mV. Mechanical tests demonstrate that the SN95 + CNP respirator is more resistant and meets the safety requisites of aerosol penetration, resistance to breath and flammability, presenting higher potential to filtrate microbial and viral particles when compared to conventional SN95 respirators. Furthermore, biological in vitro tests on bacteria, fungi and mammalian cell lines (HaCat, Vero E6 and CCL-81) corroborate the hypothesis that our SN95 + CNP respirator presents strong antimicrobial activity and is safe for human use. There was a reduction of 96.83% of the alphacoronavirus virus and 99% of H1N1 virus and MHV-3 betacoronavirus after 120 min of contact compared to the conventional respirator (SN95), demonstrating that SN95 + CNP have a relevant potential as personal protection equipment.

CONCLUSIONS

Due to chitosan nanotechnology, our novel N95 respirator presents improved mechanical, antimicrobial and antiviral characteristics.

Application of Starch, Cellulose, and Their Derivatives in the Development of Microparticle Drug-Delivery Systems

Micro- and nanotechnologies have been intensively studied in recent years as novel platforms for targeting and controlling the delivery of various pharmaceutical substances. Microparticulate drug delivery systems for oral, parenteral, or topical administration are multiple unit formulations, considered as powerful therapeutic tools for the treatment of various diseases, providing sustained drug release, enhanced drug stability, and precise dosing and directing the active substance to specific sites in the organism. The properties of these pharmaceutical formulations are highly dependent on the characteristics of the polymers used as drug carriers for their preparation. Starch and cellulose are among the most preferred biomaterials for biomedical applications due to their biocompatibility, biodegradability, and lack of toxicity. These polysaccharides and their derivatives, like dextrins (maltodextrin, cyclodextrins), ethylcellulose, methylcellulose, hydroxypropyl methylcellulose, carboxy methylcellulose, etc., have been widely used in pharmaceutical technology as excipients for the preparation of solid, semi-solid, and liquid dosage forms. Due to their accessibility and relatively easy particle-forming properties, starch and cellulose are promising materials for designing drug-loaded microparticles for various therapeutic applications. This study aims to summarize some of the basic characteristics of starch and cellulose derivatives related to their potential utilization as microparticulate drug carriers in the pharmaceutical field.

Applications of drug delivery systems, organic, and inorganic nanomaterials in wound healing

The skin is known to be the largest organ in the human body, while also being exposed to environmental elements. This indicates that skin is highly susceptible to physical infliction, as well as damage resulting from medical conditions such as obesity and diabetes. The wound management costs in hospitals and clinics are expected to rise globally over the coming years, which provides pressure for more wound healing aids readily available in the market. Recently, nanomaterials have been gaining traction for their potential applications in various fields, including wound healing. Here, we discuss various inorganic nanoparticles such as silver, titanium dioxide, copper oxide, cerium oxide, MXenes, PLGA, PEG, and silica nanoparticles with their respective roles in improving wound healing progression. In addition, organic nanomaterials for wound healing such as collagen, chitosan, curcumin, dendrimers, graphene and its derivative graphene oxide were also further discussed. Various forms of nanoparticle drug delivery systems like nanohydrogels, nanoliposomes, nanofilms, and nanoemulsions were discussed in their function to deliver therapeutic agents to wound sites in a controlled manner.

Metastatic Melanoma: A Preclinical Model Standardization and Development of a Chitosan-Coated Nanoemulsion Containing Temozolomide to Treat Brain Metastasis

Melanoma is the most aggressive type of skin cancer. Brain metastasis is the worst scenario in metastatic melanoma and the treatment options for these patients are limited. Temozolomide (TMZ) is a chemotherapy agent used to treat primary central nervous system tumors. Our objective was to develop chitosan-coated nanoemulsion containing temozolomide (CNE-TMZ) for nasal route administration to melanoma brain metastasis treatment. A preclinical model of metastatic brain melanoma was standardized, and the efficiency of the developed formulation was further determined in vitro and in vivo. The nanoemulsion was done by spontaneous emulsification method and the formulation was characterized by size, pH, polydispersity index, and zeta potential. Culture assessments to determine cell viability were done in the A375 human melanoma cell line. To determine the safety of formulation, healthy C57/BL6 mice were treated with a nanoemulsion without TMZ. The model in vivo used B16-F10 cells implanted by stereotaxic surgery in C57/BL6 mice brains. The results demonstrate that the preclinical model used showed to be useful to analyze the efficiency of new candidate drugs to treat melanoma brain metastasis. The chitosan-coated nanoemulsions with TMZ showed the expected physicochemical characteristics and demonstrated safety and efficacy, reducing around 70% the tumor size compared to control mice, and presenting a tendency in mitotic index reduction, becoming an interesting approach to treat melanoma brain metastasis.

Schwann cell-encapsulated chitosan-collagen hydrogel nerve conduit promotes peripheral nerve regeneration in rodent sciatic nerve defect models

Chitosan has various tissue regeneration effects. This study was designed to investigate the nerve regeneration effect of Schwann cell (SC)-encapsulated chitosan-collagen hydrogel nerve conduit (CCN) transplanted into a rat model of sciatic nerve defect. We prepared a CCN consisting of an outer layer of chitosan hydrogel and an inner layer of collagen hydrogel to encapsulate the intended cells. Rats with a 10-mm sciatic nerve defect were treated with SCs encapsulated in CCN (CCN+), CCN without SCs (CCN-), SC-encapsulated silicone tube (silicone+), and autologous nerve transplanting (auto). Behavioral and histological analyses indicated that motor functional recovery, axonal regrowth, and myelination of the CCN+ group were superior to those of the CCN- and silicone+ groups. Meanwhile, the CCN- and silicone+ groups showed no significant differences in the recovery of motor function and nerve histological restoration. In conclusion, SC-encapsulated CCN has a synergistic effect on peripheral nerve regeneration, especially axonal regrowth and remyelination of host SCs. In the early phase after transplantation, SC-encapsulated CCNs have a positive effect on recovery. Therefore, using SC-encapsulated CCNs may be a promising approach for massive peripheral nerve defects.

The Composite Material of (PEDOT-Polystyrene Sulfonate)/Chitosan-AuNPS-Glutaraldehyde/as the Base to a Sensor with Laccase for the Determination of Polyphenols

The described research aimed to develop the properties of the conductive composite /poly(3,4-ethylenedioxy-thiophene-poly(4-lithium styrenesulfonic acid)/chitosan-AuNPs-glutaraldehyde/ (/PEDOT-PSSLi/chit-AuNPs-GA/) and to develop an electrochemical enzyme sensor based on this composite material and glassy carbon electrodes (GCEs). The composite was created via electrochemical production of an /EDOT-PSSLi/ layer on a glassy carbon electrode (GCE). This layer was covered with a glutaraldehyde cross-linked chitosan and doped with AuNPs. The influence of AuNPs on the increase in the electrical conductivity of the chitosan layers and on facilitating the oxidation of polyphenols in these layers was demonstrated. The enzymatic sensor was obtained via immobilization of the laccase on the surface of the composite, with glutaraldehyde as the linker. The investigation of the surface morphology of the GCE/PEDOT-PSSLi/chit-AuNPs-GA/Laccase sensor was carried out using SEM and AFM microscopy. Using EDS and Raman spectroscopy, AuNPs were detected in the chitosan layer and in the laccase on the surface of the sensor. Polyphenols were determined using differential pulse voltammetry. The biosensor exhibited catalytic activity toward the oxidation of polyphenols. It has been shown that laccase is regenerated through direct electron transfer between the sensor and the enzyme. The results of the DPV tests showed that the developed sensor can be used for the determination of polyphenols. The peak current was linearly proportional to the concentrations of catechol in the range of 2-90 μM, with a limit of detection (LOD) of 1.7 μM; to those of caffeic acid in the range of 2-90 μM, LOD = 1.9 μM; and to those of gallic acid in the range 2-18 μM, LOD = 1.7 μM. Finally, the research conducted in order to determine gallic acid in a natural sample, for which white wine was used, was described.

Considerations for an ideal post-surgical wound dressing aligned with antimicrobial stewardship objectives: a scoping review

OBJECTIVE

Most surgical wounds heal by primary or secondary intention. Surgical wounds can present specific and unique challenges including wound dehiscence and surgical site infection (SSI), either of which can increase risk of morbidity and mortality. The use of antimicrobials to treat infection in these wounds is prevalent, but there is now an imperative to align treatment with reducing antimicrobial resistance and antimicrobial stewardship (AMS). The aim of this review was to explore the published evidence identifying general considerations/criteria for an ideal post-surgical wound dressing in terms of overcoming potential wound healing challenges (including infection) while supporting AMS objectives.

METHOD

A scoping review examining evidence published from 1954-2021, conducted by two authors acting independently. Results were synthesised narratively and have been reported in line with PRISMA Extension for Scoping Reviews.

RESULTS

A total of 819 articles were initially identified and subsequently filtered to 178 for inclusion in the assessment. The search highlighted six key outcomes of interest associated with post-surgical wound dressings: wound infection; wound healing; physical attributes related to comfort, conformability and flexibility; fluid handling (e.g., blood and exudate); pain; and skin damage.

CONCLUSION

There are several challenges that can be overcome when treating a post-surgical wound with a dressing, not least the prevention and treatment of SSIs. However, it is imperative that the use of antimicrobial wound dressings is aligned with AMS programmes and alternatives to active antimicrobials investigated.

Design, physicochemical characterisation, and in vitro cytotoxicity of cisplatin-loaded PEGylated chitosan injectable nano / sub-micron crystals

The study aimed to develop cisplatin-loaded PEGylated chitosan nanoparticles. The optimal batch of cisplatin-loaded PEGylated chitosan nanoparticles had a + 49.9 mV zeta potential, PDI of 0.347, and % PDI of 58.9. Nanoparticle zeta size was 741.4 z. d.nm, the size in diameter was 866.7 ± 470.5 nm, and nanoparticle conductivity in colloidal solution was 0.739 mS/cm. Differential scanning calorimetry (DSC) revealed that cisplatin-loaded PEGylated chitosan nanoparticles had sharp endothermic peaks at temperatures at 168.6 °C. The thermogravimetric analysis (TGA) showed the weight loss of cisplatin-loaded PEGylated chitosan nanoparticles, which was observed as 95% at 262.76 °C. XRD investigation on cisplatin-loaded PEGylated chitosan nanoparticles exhibited distinct peaks at 2θ as 9.7°, 20.4°, 22.1°, 25.3°, 36.1°, 38.1°, 39.5°, 44.3°, and 64.5°, confirming crystalline structure. The ¹H NMR analysis showed the fingerprint region of cisplatin-loaded PEGylated chitosan nanoparticles as 0.85, 1.73, and 1.00 ppm in the proton dimension and de-shielded proton peaks appeared at 3.57, 3.58, 3.58, 3.59, 3.65, 3.67, 3,67, 3,67, 3.70, 3.71, 3.77, 3.78 and 4.71 ppm. The ¹³C NMR spectrum showed specified peaks at 63.18, 69.20, and 70.77 ppm. The FT-IR spectra of cisplatin loaded PEGylated nanoparticles show the existence of many fingerprint regions at 3186.52, 2931.68, 1453.19, 1333.98, 1253.71, 1085.19, 1019.60, 969.98, 929.53, 888.80, 706.13, and 623.67 cm^-1. The drug release kinetics of cisplatin loaded PEGylated chitosan nanoparticles showed zero order kinetics with 48% of drug release linearity fashion which has R² value of 0.9778. Studies on the MCF-7 ATCC human breast cancer cell line in vitro revealed that the IC50 value 82.08 µg /mL. Injectable nanoparticles had good physicochemical and cytotoxic properties. This method is novel since the application of the PEGylation processes leads to an increased solubility of chitosan nanoparticles at near neutral pH.

A Comparison of Interpolyelectrolyte Complexes (IPECs) Made from Anionic Block Copolymer Micelles and PDADMAC or q-Chitosan as Polycation

Block copolymers synthesized via Atom Transfer Radical Polymerization from alkyl acrylate and t-butyl acrylate and the subsequent hydrolysis of the t-butyl acrylate to acrylic acid were systematically varied with respect to their hydrophobic part by the variation in the alkyl chain length and the degree of polymerisation in this block. Depending on the architecture of the hydrophobic part, they had a more or less pronounced tendency to form copolymer micelles in an aqueous solution. They were employed for the preparation of IPECs by mixing the copolymer aggregates with the polycations polydiallyldimethylammonium chloride (PDADMAC) or q-chit. The IPEC structure as a function of the composition was investigated by Static Light and Small Angle Neutron Scattering. For weakly-associated block copolymers (short alkyl chain), complexation with polycation led to the formation of globular complexes, while already existing micelles (long alkyl chain) grew further in mass. In general, aggregates became larger upon the addition of further polycation, but this growth was much more pronounced for PDADMAC compared to q-chit, thereby leading to the formation of clusters of aggregates. Accordingly, the structure of such IPECs with a hydrophobic block depended largely on the type of complexing polyelectrolyte, which allowed for controlling the structural organisation via the molecular architecture of the two oppositely charged polyelectrolytes.

A review on polysaccharides mediated electrospun nanofibers for diabetic wound healing: Their current status with regulatory perspective

The current treatment strategies for diabetic wound care provide only moderate degree of effectiveness; hence new and improved therapeutic techniques are in great demand. Diabetic wound healing is a complex physiological process that involves synchronisation of various biological events such as haemostasis, inflammation, and remodelling. Nanomaterials like polymeric nanofibers (NFs) offer a promising approach for the treatment of diabetic wounds and have emerged as viable options for wound management. Electrospinning is a powerful and cost-effective method to fabricate versatile NFs with a wide array of raw materials for different biological applications. The electrospun NFs have unique advantages in the development of wound dressings due to their high specific surface area and porosity. The electrospun NFs possess a unique porous structure and biological function similar to the natural extracellular matrix (ECM), and are known to accelerate wound healing. Compared to traditional dressings, the electrospun NFs are more effective in healing wounds owing to their distinct characteristics, good surface functionalisation, better biocompatibility and biodegradability. This review provides a comprehensive overview of the electrospinning procedure and its operating principle, with special emphasis on the role of electrospun NFs in the treatment of diabetic wounds. This review discusses the present techniques applied in the fabrication of NF dressings, and highlights the future prospects of electrospun NFs in medicinal applications.

Anti-COVID-19 Credentials of Chitosan Composites and Derivatives: Future Scope?

Chitosan derivatives and composites are the next generation polymers for biomedical applications. With their humble origins from the second most abundant naturally available polymer chitin, chitosan is currently one of the most promising polymer systems, with wide biological applications. This current review gives a bird's eye view of the antimicrobial applications of chitosan composites and derivatives. The antiviral activity and the mechanisms behind the inhibitory activity of these components have been reviewed. Specifically, the anti-COVID-19 aspects of chitosan composites and their derivatives have been compiled from the existing scattered reports and presented. Defeating COVID-19 is the battle of this century, and the chitosan derivative-based combat strategies naturally become very attractive. The challenges ahead and future recommendations have been addressed.

Evaluation of a chitosan dressing in the management of hard-to-heal wounds

It is vital that as tissue viability teams, we are constantly striving to improve service delivery, healing rates and positive patient outcomes. In 2021 the author's team were introduced to a unique bioactive microfibre gelling (BMG) dressing, MaxioCel®, which uses chitosan to maintain a cohesive structure to increase fluid handling, antimicrobial and wound-healing properties.

METHOD

Following Isle of Wight NHS Foundation Trust guidelines and with patient consent, 11 patients with chronic wounds of various aetiologies and wound durations were enrolled in a multicentre, clinical 4-week evaluation.

RESULTS

Over a 4-week evaluation period, all patients showed a significant improvement in wound healing parameters including average tissue type, condition of periwound skin, patient comfort, exudate levels. The assessments demonstrated a significant decrease in necrotic and sloughy tissue (from >75% at the start of treatment), replaced with healthy granulation and epithelial tissue (>80% by week 4). Significant reduction in pain score was also reported in all patients, with average pain score at the start of the evaluation reducing from 5.8 ± 2.7 to a score of 2.5 ± 1.9 within 3 weeks.

CONCLUSION

The complicated wounds seen in this study were previously non-healing and MaxioCel, with BMG technology, demonstrated both significant clinical improvement and a positive impact on patient quality of life within just 4 weeks, resulting in its addition to the team's woundcare formulary.

The Effects of Chitosan on the Healing Process of Oral Mucosa: An Observational Cohort Feasibility Split-Mouth Study

The healing process is a dynamic process accompanied by some classical symptoms of inflammation such as redness, swelling, pain, and loss of function. Chitosan is a natural polymer with properties that contribute to tissue healing, with properties that could be applied in periodontal therapy, such as the wound healing of oral mucosa. This experimental split-mouth study aims to assess the possibilities of chitosan influencing the healing process of oral mucosa in eight patients, where the studied group was subjected to two oral surgeries: one with chitosan hydrogel into the socket and other without the biomaterial. A semi-quantitative analysis of the data was performed. Some classic signs of inflammation in a short period of time were observed where chitosan acted, compared to the control. An absence of bleeding was observed in the chitosan cases. According to the literature, chitosan recruits and activates neutrophils and macrophages and stimulates angiogenesis. Hemostatic and antimicrobial activity of chitosan also play an important role in wound healing. Chitosan seems to improve the postoperative quality of patients, allowing rapid wound healing with less complications.

Polyethylenimine linked with chitosan improves astaxanthin production in Haematococcus pluvialis

Astaxanthin is receiving increasing interest as an antioxidant and high value-added secondary metabolite. Haematococcus pluvialis is the main source for astaxanthin production, and many studies are being conducted to increase the production of astaxanthin. In this study, we linked polyethylenimine (PEI) with chitosan to maintain astaxanthin-inducing ability while securing the recyclability of the inducer. Astaxanthin accumulation in H. pluvialis was induced to 86.4 pg cell^-1 with the PEI-chitosan fiber (PCF) treatment prepared by cross-linking of 10 μM PEI and low molecular weight (MW) chitosan via epichlorohydrin. PEI concentration affected the astaxanthin accumulation, whereas the MW of chitosan did not. In addition, the PCF treatment in H. pluvialis increased the reactive oxygen species (ROS) content in cells, thereby upregulating the transcription of enzymes involved in astaxanthin biosynthesis. PCF can be reused multiple times with the maintenance of over 90% of the astaxanthin production efficiency. This study offers a reusable PCF stimulation strategy for enhancing natural astaxanthin content, and PCF treatment will easily increase the production scale or reduce production costs by using recyclability that is not available in current methods. KEY POINTS: • Polyethylenimine-chitosan fiber (PCF) was applied to Haematococcus pluvialis • PCF promotes astaxanthin accumulation by enhancing oxidative stress in H. pluvialis • PCF can be reused multiple times with maintaining over 90% production efficiency.

The Application of Biomaterials in Spinal Cord Injury

The spinal cord and the brain form the central nervous system (CNS), which is the most important part of the body. However, spinal cord injury (SCI) caused by external forces is one of the most difficult types of neurological injury to treat, resulting in reduced or even absent motor, sensory and autonomic functions. It leads to the reduction or even disappearance of motor, sensory and self-organizing nerve functions. Currently, its incidence is increasing each year worldwide. Therefore, the development of treatments for SCI is urgently needed in the clinic. To date, surgery, drug therapy, stem cell transplantation, regenerative medicine, and rehabilitation therapy have been developed for the treatment of SCI. Among them, regenerative biomaterials that use tissue engineering and bioscaffolds to transport cells or drugs to the injured site are considered the most promising option. In this review, we briefly introduce SCI and its molecular mechanism and summarize the application of biomaterials in the repair and regeneration of tissue in various models of SCI. However, there is still limited evidence about the treatment of SCI with biomaterials in the clinic. Finally, this review will provide inspiration and direction for the future study and application of biomaterials in the treatment of SCI.

Drug delivery to the brain via the nasal route of administration: exploration of key targets and major consideration factors

Background

Cranial nerve-related diseases such as brain tumors, Alzheimer's disease, and epilepsy are serious diseases that continue to threaten human. Brain-related diseases are increasing worldwide, including in the United States and Korea, and these increases are closely related to the exposure to harmful substances and excessive stress caused by rapid industrialization and environmental pollution. Drug delivery to the brain is very important for the effective prevention and treatment of brain-related diseases. However, due to the presence of the blood-brain barrier and the extensive first-pass metabolism effect, the general routes of administration such as oral and intravenous routes have limitations in drug delivery to the brain. Therefore, as an alternative, the nasal-brain drug delivery route is attracting attention as a route for effective drug delivery to the brain.

Areas covered

This review includes physiological factors, advantages, limitations, current application status, especially in clinical applications, and the necessary factors for consideration in formulation development related to nasal-brain drug delivery.

Expert opinion

The nasal-brain drug delivery route has the advantage of enhancing drug delivery to the brain locally, mainly through the olfactory route rather than the systemic circulation. The nasal-brain lymphatic system has recently attracted attention, and it has been implied that the delivery of anticancer drugs to the brain nervous system is possible effectively. However, there are limitations such as low drug permeability, as well as nasal mucosa and the mucociliary system, as obstacles in nasal-brain drug delivery. Therefore, to overcome the limitations of nasal-brain drug delivery, the use of nanocarriers and mucoadhesive agents is being attempted. However, very few drugs have been officially approved for clinical application via the nasal-brain drug delivery route. This is probably because the understanding of and related studies on nasal-brain drug delivery are limited. In this review, we tried to explore the major considerations and target factors in drug delivery through the nasal-brain route based on physiological knowledge and formulation research information. This will help to provide a mechanistic understanding of drug delivery through the nasal-brain route and bring us one step closer to developing effective formulations and drugs in consideration of the key factors for nasal-brain drug delivery.

In Vivo and In Silico Investigation of the Anti-Obesity Effects of Lactiplantibacillus plantarum Combined with Chia Seeds, Green Tea, and Chitosan in Alleviating Hyperlipidemia and Inflammation

The increasing prevalence of obesity has become a demanding issue in both high-income and low-income countries. Treating obesity is challenging as the treatment options have many limitations. Recently, diet modification has been commonly applied to control or prevent obesity and its risks. In this study, we investigated novel therapeutic approaches using a combination of a potential probiotic source with prebiotics. Forty-eight adult male Sprague-Dawley rats were selected and divided into seven groups (eight rats per group). The first group was fed a high-fat diet, while the second group was a negative control. The other five groups were orally administered with a probiotic, Lactiplantibacillus plantarum (L. plantarum), and potential prebiotics sources (chia seeds, green tea, and chitosan) either individually or in combination for 45 days. We collected blood samples to analyze the biochemical parameters and dissected organs, including the liver, kidney, and pancreas, to evaluate obesity-related injuries. We observed a more significant decrease in the total body weight by combining these approaches than with individual agents. Moreover, treating the obese rats with this combination decreased serum catalase, superoxide dismutase, and liver malondialdehyde levels. A histopathological examination revealed a reduction in obesity-related injuries in the liver, kidney, and pancreas. Further docking studies indicated the potential role of chia seeds and green tea components in modulating obesity and its related problems. Therefore, we suggest that the daily administration of a pre- and probiotic combination may reduce obesity and its related problems.

Shrimp-waste based dispersant as oil spill treating agent: Biodegradation of dispersant and dispersed oil

The emerging demand for the enhancement of biodegradation of persistent organic pollutants from marine oil spills using oil-treating agents to minimize the environmental impacts promotes the development of green dispersants. Shrimp waste is a potential raw material to generate green dispersants. The biodegradability of dispersed oil and dispersants themselves are key factors for the national consideration of the approval, stockpile, and usage of dispersants. However, it is unknown whether shrimp-waste-based dispersant (SWD) has high bioavailability or facilitates the biodegradation of dispersed oil. In this study, we tackled the biodegradation of oil dispersed by a purified SWD. Furthermore, the SWD biodegradability was evaluated by exploring the degradation genes via metagenomic sequencing, analyzing the enzymatic activities for dispersant biodegradation by molecular docking, and discussing the SWD toxicity. We discovered that the SWD facilitated the biodegradation of two crude oils (Alaska North Slope and Marine Fuel-No.6). The metagenomic analysis with molecular docking showed that fresh seawater had feasible enzymes to degrade the SWD to safety components. Additionally, the SWD was low toxic and high bioactive. The findings helped confirm that the purified SWD is an effective and eco-sustainable marine oil spill treating agent and tracked the biodegradation of dispersed oil and the SWD.

L-Cysteine Modified Chitosan Nanoparticles and Carbon-Based Nanostructures for the Intranasal Delivery of Galantamine

The present study evaluates the use of thiolized chitosan conjugates (CS) in combination with two fundamental carbon nanoforms (carbon dots (CDs) and Hierarchical Porous Carbons (HPC)) for the preparation of intranasally (IN) administrated galantamine (GAL) nanoparticles (NPs). Initially, the modification of CS with L-cysteine (Cys) was performed, and the successful formation of a Cys-CS conjugates was verified via ¹H-NMR, FTIR, and pXRD. The new Cys-CS conjugate showed a significant solubility enhancement in neutral and alkaline pH, improving CS’s utility as a matrix-carrier for IN drug administration. In a further step, drug-loaded NPs were prepared via solid-oil–water double emulsification, and thoroughly analyzed by SEM, DLS, FTIR and pXRD. The results showed the formation of spherical NPs with a smooth surface, while the drug was amorphously dispersed within most of the prepared NPs, with the exemption of those systems contianing the CDs. Finally, in vitro dissolution release studies revealed that the prepared NPs could prolong GAL’s release for up to 12 days. In sum, regarding the most promising system, the results of the present study clearly suggest that the preparation of NPs using both Cys-CS and CDs results in a more thermodynamically stable drug dispersion, while a zero-order release profile was achieved, which is essential to attain a stable in vivo pharmacokinetic behavior.

Recent Advances of Chitosan Formulations in Biomedical Applications

Chitosan, a naturally abundant cationic polymer, is chemically composed of cellulose-based biopolymers derived by deacetylating chitin. It offers several attractive characteristics such as renewability, hydrophilicity, biodegradability, biocompatibility, non-toxicity, and a broad spectrum of antimicrobial activity towards gram-positive and gram-negative bacteria as well as fungi, etc., because of which it is receiving immense attention as a biopolymer for a plethora of applications including drug delivery, protective coating materials, food packaging films, wastewater treatment, and so on. Additionally, its structure carries reactive functional groups that enable several reactions and electrochemical interactions at the biomolecular level and improves the chitosan’s physicochemical properties and functionality. This review article highlights the extensive research about the properties, extraction techniques, and recent developments of chitosan-based composites for drug, gene, protein, and vaccine delivery applications. Its versatile applications in tissue engineering and wound healing are also discussed. Finally, the challenges and future perspectives for chitosan in biomedical applications are elucidated.

The effects of chitosan supplementation on anthropometric indicators of obesity, lipid and glycemic profiles, and appetite-regulated hormones in adolescents with overweight or obesity: a randomized, double-blind clinical trial

Background

Chitosan is one of dietary fiber that has received great attention in improving obesity-related markers, but little is known on its effects on adolescents.

Objectives

To analyze the effects of chitosan supplementation on obesity-related cardiometabolic markers and appetite-related hormones in adolescents with overweight or obesity.

Methods and analysis

A randomized clinical trial was performed on 64 adolescents with overweight and obesity, who were randomly allocated to receive chitosan supplementation (n = 32) or placebo as control (n = 32) for 12 weeks. Anthropometric measures, lipid and glycemic profiles, and appetite-related hormones were examined.

Results

Sixty-one participants completed study (chitosan = 31, placebo = 30). Chitosan supplementation significantly improved anthropometric indicators of obesity (body weight: − 3.58 ± 2.17 kg, waist circumference: − 5.00 ± 3.11 cm, and body mass index: − 1.61 ± 0.99 kg/m² and − 0.28 ± 0.19 Z-score), lipid (triglycerides: − 5.67 ± 9.24, total cholesterol: − 14.12 ± 13.34, LDL-C: − 7.18 ± 10.16, and HDL-C: 1.83 ± 4.64 mg/dL) and glycemic markers (insulin: − 5.51 ± 7.52 μIU/mL, fasting blood glucose: − 5.77 ± 6.93 mg/dL, and homeostasis model assessment of insulin resistance: − 0.24 ± 0.44), and appetite-related hormones (adiponectin: 1.69 ± 2.13 ng/dL, leptin − 19.40 ± 16.89, and neuropeptide Y: − 41.96 ± 79.34 ng/dL). When compared with the placebo group, chitosan supplementation had greater improvement in body weight, body mass index (kg/m² and Z-score), waist circumference, as well as insulin, adiponectin, and leptin levels. Differences were significant according to P-value < 0.05.

Conclusion

Chitosan supplementation can improve cardiometabolic parameters (anthropometric indicators of obesity and lipid and glycemic markers) and appetite-related hormones (adiponectin, leptin, and NPY) in adolescents with overweight or obesity.

Bio-based materials for barrier coatings on paper packaging

Research into alternative packaging materials is becoming more and more popular as a result of growing eco-friendly concerns regarding the usage of some petroleum-based polymeric packaging materials and coatings, as well as growing buyer demands for products with nutritious quality and extended shelf lives. Barrier coatings made of naturally renewable biopolymers can be applied to paper packing materials. These biopolymer coatings have the potential to replace the current synthetic paper and paperboard coatings, are strong oxygen and oil barriers, and may prevent the unintended moisture transfer in food goods. An appealing method of controlling the growth and spread of microorganisms in food packaging is the integration of antimicrobial compounds into coatings to create active/functional paper-based packaging materials. Here, in this review of the oxygen/moisture barrier, mechanical, and other characteristics of paper coated with bio-based materials. Examples are used to discuss the current and future uses of bio-based material coatings on paper packaging materials to improve barrier performance.

Chitosan-based high-strength supramolecular hydrogels for 3D bioprinting

The loss of tissues and organs is a major challenge for biomedicine, and the emerging 3D bioprinting technology has brought the dawn for the development of tissue engineering and regenerative medicine. Chitosan-based supramolecular hydrogels, as novel biomaterials, are considered as ideal materials for 3D bioprinting due to their unique dynamic reversibility and fantastic biological properties. Although chitosan-based supramolecular hydrogels have wonderful biological properties, the mechanical properties are still under early exploration. This paper aims to provide some inspirations for researchers to further explore. In this review, common 3D bioprinting techniques and the properties required for bioink for 3D bioprinting are firstly described. Then, several strategies to enhance the mechanical properties of chitosan hydrogels are introduced from the perspectives of both materials and supramolecular binding motifs. Finally, current challenges and future opportunities in this field are discussed. The combination of chitosan-based supramolecular hydrogels and 3D bioprinting will hold promise for developing novel biomedical implants.

Vanillin-crosslinked chitosan/ZnO nanocomposites as a drug delivery system for 5-fluorouracil: study on the release behavior via mesoporous ZrO2-Co3O4 nanoparticles modified sensor and antitumor activity

Herein, a series of vanillin-crosslinked chitosan (Vn-CS) nanocomposites (NCs) containing various contents of ZnO nanoparticles (NPs) was prepared and characterized via FTIR spectroscopy, XRD, TGA, SEM and TEM. Changing the weight% of ZnO NPs in the prepared NCs resulted in an improvement in their antibacterial activity against Gram-negative and Gram-positive bacteria strains compared with the unmodified CS, and the encapsulation efficiency of 5-fluorouracil (5-FU) was found to be in the range of 61.4–69.2%. Subsequently, the release of 5-FU was monitored utilizing the mesoporous ZrO₂–Co₃O₄ NPs modified carbon paste sensor via the square-wave adsorptive anodic stripping voltammetry (SW-AdASV) technique. Also, the release mechanism of 5-FU from each NC was studied by applying the zero-order, first-order, Hixson–Crowell and Higuchi models to the experimental results. The cytotoxicity of prepared NCs and 5-FU-encapsulated NCs was evaluated against the HePG-2, MCF-7 and HCT-116 cancer cell lines, in addition to the WI-38 and WISH normal cell lines using the MTT assay. Notably, 5-FU/CV₁₀ NC exhibited the highest antitumor activity towards all tested cancer cell lines and a moderate activity against WI-38 and WISH normal cell lines with IC₅₀ values of 28.02 ± 2.5 and 31.65 ± 2.7 μg mL⁻¹, respectively. The obtained nanocomposites exhibited suitable selectivity with minimum toxicity against normal cells.

Herein, a series of vanillin-crosslinked chitosan (Vn-CS) nanocomposites (NCs) containing various contents of ZnO nanoparticles (NPs) was prepared and characterized via FTIR spectroscopy, XRD, TGA, SEM and TEM.

Engineered Hemostatic Biomaterials for Sealing Wounds

Hemostatic biomaterials show great promise in wound control for the treatment of uncontrolled bleeding associated with damaged tissues, traumatic wounds, and surgical incisions. A surge of interest has been directed at boosting hemostatic properties of bioactive materials via mechanisms triggering the coagulation cascade. A wide variety of biocompatible and biodegradable materials has been applied to the design of hemostatic platforms for rapid blood coagulation. Recent trends in the design of hemostatic agents emphasize chemical conjugation of charged moieties to biomacromolecules, physical incorporation of blood-coagulating agents in biomaterials systems, and superabsorbing materials in either dry (foams) or wet (hydrogel) states. In addition, tough bioadhesives are emerging for efficient and physical sealing of incisions. In this Review, we highlight the biomacromolecular design approaches adopted to develop hemostatic bioactive materials. We discuss the mechanistic pathways of hemostasis along with the current standard experimental procedures for characterization of the hemostasis efficacy. Finally, we discuss the potential for clinical translation of hemostatic technologies, future trends, and research opportunities for the development of next-generation surgical materials with hemostatic properties for wound management.

Cell-free protein synthesis of influenza virus hemagglutinin HA2-integrated virosomes for siRNA delivery

It is well known that the difficulty of siRNA therapeutic application is the lack of safe and effective delivery vector. Virosome is a nano vesicle composed of lipid membrane and membrane protein. It retains fusion protein without virus genetic material, and therefore has the reduced immunogenicity compared with viral vector. Virosomes have the potential to deliver protein and nucleic acid drugs, but the traditional preparation method of virosomes is quite limited. In this study, we firstly proposed to synthesize influenza virus hemagglutinin HA2 virosomes by cell-free protein synthesis. In this study, liposomes provided the hydrophobic lipid bilayer environment for the formation of HA2 protein multimer, which inhibited the aggregation of hydrophobic HA2 and improved HA2 protein expression. Chitosan as a rigid core adsorbed siRNA and improved the encapsulation efficiency of siRNA. In conclusion, the cell-free protein synthesis was used to prepare HA2 virosomes, which paves the way for constructing a novel nano vector with high delivery efficiency and biosafety for the delivery of siRNA.

Effect of Chitosan Nanoparticles as Edible Coating on the Storability and Quality of Apricot Fruits

Apricots are a fragile fruit that rots quickly after harvest. Therefore, they have a short shelf-life. The purpose of this work is to determine the effect of coatings containing chitosan (CH) as well as its nanoparticles (CHNPs) as thin films on the quality and shelf-life of apricots stored at room (25 ± 3 °C) and cold (5 ± 1 °C) temperatures. The physical, chemical, and sensorial changes that occurred during storage were assessed, and the shelf-life was estimated. Transmission electron microscopy was used to examine the size and shape of the nanoparticle. The nanoparticles had a spherical shape with an average diameter of 16.4 nm. During the storage of the apricots, those treated with CHNPs showed an obvious decrease in weight loss, decay percent, total soluble solids, and lipid peroxidation, whereas total acidity, ascorbic acid, and carotenoid content were higher than those in the fruits treated with CH and the untreated fruits (control). The findings of the sensory evaluation revealed a significant difference in the overall acceptability scores between the samples treated with CHNPs and the other samples. Finally, it was found that CHNP coatings improved the qualitative features of the apricots and extended their shelf-life for up to 9 days at room temperature storage and for 30 days in cold storage.

Antibiotics-Free Compounds for Chronic Wound Healing

The rapid rise in the health burden associated with chronic wounds is of great concern to policymakers, academia, and industry. This could be attributed to the devastating implications of this condition, and specifically, chronic wounds which have been linked to invasive microbial infections affecting patients' quality of life. Unfortunately, antibiotics are not always helpful due to their poor penetration of bacterial biofilms and the emergence of antimicrobial resistance. Hence, there is an urgent need to explore antibiotics-free compounds/formulations with proven or potential antimicrobial, anti-inflammatory, antioxidant, and wound healing efficacy. The mechanism of antibiotics-free compounds is thought to include the disruption of the bacteria cell structure, preventing cell division, membrane porins, motility, and the formation of a biofilm. Furthermore, some of these compounds foster tissue regeneration by modulating growth factor expression. In this review article, the focus is placed on a number of non-antibiotic compounds possessing some of the aforementioned pharmacological and physiological activities. Specific interest is given to Aloevera, curcumin, cinnamaldehyde, polyhexanide, retinoids, ascorbate, tocochromanols, and chitosan. These compounds (when alone or in formulation with other biologically active molecules) could be a dependable alternative in the management or prevention of chronic wounds.

Sustainable adsorptive removal of antibiotic residues by chitosan composites: An insight into current developments and future recommendations

During COVID-19 crisis, water pollution caused by pharmaceutical residuals have enormously aggravated since millions of patients worldwide are consuming tons of drugs daily. Antibiotics are the preponderance pharmaceutical pollutants in water bodies that surely cause a real threat to human life and ecosystems. The excellent characteristics of chitosan such as nontoxicity, easy functionality, biodegradability, availability in nature and the abundant hydroxyl and amine groups onto its backbone make it a promising adsorbent. Herein, we aimed to provide a comprehensive overview of recent published research papers regarding the removal of antibiotics by chitosan composite-based adsorbents. The structure, ionic form, optimum removal pH and λmax of the most common antibiotics including Tetracycline, Ciprofloxacin, Amoxicillin, Levofloxacin, Ceftriaxone, Erythromycin, Norfloxacin, Ofloxacin, Doxycycline, Cefotaxime and Sulfamethoxazole were summarized. The development of chitosan composite-based adsorbents in order to enhance their adsorption capacity, reusability and validity were presented. Moreover, the adsorption mechanisms of these antibiotics were explored to provide more information about adsorbate-adsorbent interactions. Besides the dominant factors on the adsorption process including pH, dosage, coexisting ions, etc. were discussed. Moreover, conclusions and future recommendations are provided to inspire for further researches.