Subunit organization and structure in the F0 sector of Escherichia coli F1F0 ATP synthase

Torque generation mechanism in Fo motor of ATP synthase elucidated by free-energy and Coulomb-energy landscapes along the c-ring rotation

F_o portion of ATP synthase is a proton-motive rotary motor. The Coulombic attraction between the conserved acidic residues in the c-ring and the arginine in the a-subunit (aR) was early proposed to drive the c-ring rotation relative to the a-subunit, and has been actually observed in our previous molecular dynamics simulation with full atomistic description of F_o embedded in the membrane. In this study, to quantify the driving force, we conducted the umbrella sampling (US) and obtained the free-energy landscape for the c-ring rotation. We first show that the free-energy gradient toward the ATP-synthesis direction appears in the deprotonated state of cE. Using the sampled snapshots that cover a wide range of the rotational angle, we further analyzed the rotational-angle dependence of the hydration and the protonation states and obtained the Coulomb-energy landscapes with a focus on the cE-aR interaction. The results indicate that both the Coulombic solvation energy of cE and the interaction energy between cE and aR contribute to the torque generation for the c-ring rotation.

Coulombic Organization in Membrane-Embedded Rotary Motor of ATP Synthase

The electrochemical potential difference of protons across the membrane is used to synthesize ATP through the proton-motive rotatory motion of the membrane-embedded region of ATP synthase called F_o. In this study, we illuminate the unsolved proton-motive rotary mechanism of F_o on the basis of atomistic simulation with full description of protein, lipid, and water molecules, and highlight the underlying Coulombic design. We first show that a water channel is spontaneously formed at the interfacial region between the rotor (c-ring) and the stator (a-subunit). The observed water channel is a full channel penetrating the membrane, but a Coulomb barrier by a strictly conserved arginine of the a-subunit dominates at the midpoint of the full channel, preventing proton leakage. Our molecular dynamics simulation further demonstrates that the Coulomb attraction between the arginine and the essential glutamic acid of the c-subunit drives the c-ring rotation. We finally illustrate that the charge-state changes of the glutamic acids, enabled by the electrochemical potential difference of proton and the thermal motion, can produce unidirectional rotation of the c-ring.

Membrane insertion of F0 c subunit of F0F1 ATPase depends on glycolipozyme MPIase and is stimulated by YidC

The F₀ c subunit of F₀F₁ ATPase (F₀-c) possesses two membrane-spanning stretches with N- and C-termini exposed to the periplasmic (extracellular) side of the cytoplasmic membrane of E. coli. Although F₀-c insertion has been extensively analyzed in vitro by means of protease protection assaying, it is unclear whether such assays allow elucidation of the insertion process faithfully, since the membrane-protected fragment, an index of membrane insertion, is a full-length polypeptide of F₀-c, which is the same as the protease-resistant conformation without membrane insertion. We found that the protease-resistant conformation could be discriminated from membrane-insertion by including octyl glucoside on protease digestion. By means of this system, we found that F₀-c insertion depends on MPIase, a glycolipozyme involved in membrane insertion, and is stimulated by YidC. In addition, we found that acidic phospholipids PG and CL transform F₀-c into a protease-resistant form, while MPIase prevents the acquisition of such a protease-resistant conformation.

What is the role of epsilon in the Escherichia coli ATP synthase?

The ATP synthase from Escherichia coli is a prototype of the ATP synthases that are found in many bacteria, in the mitochondria of eukaryotes, and in the chloroplasts of plants. It contains eight different types of subunits that have traditionally been divided into F(1), a water-soluble catalytic sector, and F(o), a membrane-bound ion transporting sector. In the current rotary model for ATP synthesis, the subunits can be divided into rotor and stator subunits. Several lines of evidence indicate that epsilon is one of the three rotor subunits, which rotate through 360 degrees. The three-dimensional structure of epsilon is known and its interactions with other subunits have been explored by several approaches. In light of recent work by our group and that of others, the role of epsilon in the ATP synthase from E. coli is discussed.

Pharmacological profile of the selective mitochondrial F1F0 ATP hydrolase inhibitor BMS-199264 in myocardial ischemia

The mitochondrial F1F0 ATP synthase is responsible for the majority of ATP production in mammals and does this through a rotary catalytic mechanism. Studies show that the F1F0 ATP synthase can switch to an ATP hydrolase, and this occurs under conditions seen during myocardial ischemia. This ATP hydrolysis causes wasting of ATP that does not produce work. The degree of ATP inefficiently hydrolyzed during ischemia may be as high as 50-90% of the total. A naturally occurring, reversible inhibitor (IF-1) of the hydrolase activity is in the mitochondria, and it has a pH optimum of 6.8. Based on studies with the nonselective (inhibit both synthase and hydrolase activity) inhibitors aurovertin B and oligomycin B reduce the rate of ATP depletion during ischemia, showing that IF-1 does not completely block hydrolase activity. Oligomycin and aurovertin cannot be used for treating myocardial ischemia as they will reduce ATP production in healthy tissue. We generated a focused structure-activity relationship, and several compounds were identified that selectively inhibited the F1F0 ATP hydrolase activity while having no effect on synthase function. One compound, BMS-199264 had no effect on F1F0 ATP synthase function in submitochondrial particles while inhibiting hydrolase function, unlike oligomycin that inhibits both. BMS-199264 selectively inhibited ATP decline during ischemia while not affecting ATP production in normoxic and reperfused hearts. BMS-191264 also reduced cardiac necrosis and enhanced the recovery of contractile function following reperfusion. These data also suggest that the reversal of the synthase and hydrolase activities is not merely a chemical reaction run in reverse.

F1F0ATP synthase subunit c is targeted by the SRP to YidC in theE. coliinner membrane

Escherichia coli inner membrane proteins (IMPs) use different pathways for targeting and membrane integration. We have examined the biogenesis of the F1F0 ATP synthase subunit c, a small double spanning IMP, using complementary in vivo and in vitro approaches. The data suggest that F0c is targeted by the SRP to the membrane, where it inserts at YidC in a Sec-independent mechanism. F0c appears to be the first natural substrate of this novel pathway.

Features of Rhodobacter sphaeroides CcmFH

In this study, the in vivo function and properties of two cytochrome c maturation proteins, CcmF and CcmH from Rhodobacter sphaeroides, were analyzed. Strains lacking CcmH or both CcmF and CcmH are unable to grow under anaerobic conditions where c-type cytochromes are required, demonstrating their critical role in the assembly of these electron carriers. Consistent with this observation, strains lacking both CcmF and CcmH are deficient in c-type cytochromes when assayed under permissive growth conditions. In contrast, under permissive growth conditions, strains lacking only CcmH contain several soluble and membrane-bound c-type cytochromes, albeit at reduced levels, suggesting that this bacterium has a CcmH-independent route for their maturation. In addition, the function of CcmH that is needed to support anaerobic growth can be replaced by adding cysteine or cystine to growth media. The ability of exogenous thiol compounds to replace CcmH provides the first physiological evidence for a role of this protein in thiol chemistry during c-type cytochrome maturation. The properties of R. sphaeroides cells containing translational fusions between CcmF and CcmH and either Escherichia coli alkaline phosphatase or beta-galactosidase suggest that they are each integral cytoplasmic membrane proteins with their presumed catalytic domains facing the periplasm. Analysis of CcmH shows that it is synthesized as a higher-molecular-weight precursor protein with an N-terminal signal sequence.

The molecular mechanism of ATP synthesis by F1F0-ATP synthase

ATP synthesis by oxidative phosphorylation and photophosphorylation, catalyzed by F1F0-ATP synthase, is the fundamental means of cell energy production. Earlier mutagenesis studies had gone some way to describing the mechanism. More recently, several X-ray structures at atomic resolution have pictured the catalytic sites, and real-time video recordings of subunit rotation have left no doubt of the nature of energy coupling between the transmembrane proton gradient and the catalytic sites in this extraordinary molecular motor. Nonetheless, the molecular events that are required to accomplish the chemical synthesis of ATP remain undefined. In this review we summarize current state of knowledge and present a hypothesis for the molecular mechanism of ATP synthesis.

The role of the betaDELSEED motif of F1-ATPase: propagation of the inhibitory effect of the epsilon subunit

In F(1)-ATPase, a rotary motor enzyme, the region of the conserved DELSEED motif in the beta subunit moves and contacts the rotor gamma subunit when the nucleotide fills the catalytic site, and the acidic nature of the motif was previously assumed to play a critical role in rotation. Our previous work, however, disproved the assumption (Hara, K. Y., Noji, H., Bald, D., Yasuda, R., Kinosita, K., Jr., and Yoshida, M. (2000) J. Biol. Chem. 275, 14260-14263), and the role of this motif remained unknown. Here, we found that the epsilon subunit, an intrinsic inhibitor, was unable to inhibit the ATPase activity of a mutant thermophilic F(1)-ATPase in which all of the five acidic residues in the DELSEED motif were replaced with alanines, although the epsilon subunit in the mutant F(1)-ATPase assumed the inhibitory form. In addition, the replacement of basic residues in the C-terminal region of the epsilon subunit by alanines caused a decrease of the inhibitory effect. Partial replacement of the acidic residues in the DELSEED motif of the beta subunit or of the basic residues in the C-terminal alpha-helix of the epsilon subunit induced a partial effect. We here conclude that the epsilon subunit exerts its inhibitory effect through the electrostatic interaction with the DELSEED motif of the beta subunit.

Introduction of a carboxyl group in the first transmembrane helix of Escherichia coli F1Fo ATPase subunit c and cytoplasmic pH regulation

The multicopy subunit c of the H(+)-transporting F1Fo ATP synthase of Escherichia coli folds across the membrane as a hairpin of two hydrophobic alpha helices. The subunits interact in a front-to-back fashion, forming an oligomeric ring with helix 1 packing in the interior and helix 2 at the periphery. A conserved carboxyl, Asp(61) in E. coli, centered in the second transmembrane helix is essential for H+ transport. A second carboxylic acid in the first transmembrane helix is found at a position equivalent to Ile28 in several bacteria, some the cause of serious infectious disease. This side chain has been predicted to pack proximal to the essential carboxyl in helix 2. It appears that in some of these bacteria the primary function of the enzyme is H+ pumping for cytoplasmic pH regulation. In this study, Ile28 was changed to Asp and Glu. Both mutants were functional. However, unlike the wild type, the mutants showed pH-dependent ATPase-coupled H+ pumping and passive H+ transport through Fo. The results indicate that the presence of a second carboxylate enables regulation of enzyme function in response to cytoplasmic pH and that the ion binding pocket is aqueous accessible. The presence of a single carboxyl at position 28, in mutants I28D/D61G and I28E/D61G, did not support growth on a succinate carbon source. However, I28E/D61G was functional in ATPase-coupled H+ transport. This result indicates that the side chain at position 28 is part of the ion binding pocket.

Helical membrane protein folding, stability, and evolution

Helical membrane protein folding and oligomerization can be usefully conceptualized as involving two energetically distinct stages-the formation and subsequent side-to-side association of independently stable transbilayer helices. The interactions of helices with the bilayer, with prosthetic groups, and with each other are examined in the context of recent evidence. We conclude that the two-stage concept remains useful as an approach to simplifying discussions of stability, as a framework for folding concepts, and as a basis for understanding membrane protein evolution.

Interim report on genomics of Escherichia coli

We present a summary of recent progress in understanding Escherichia coli K-12 gene and protein functions. New information has come both from classical biological experimentation and from using the analytical tools of functional genomics. The content of the E. coli genome can clearly be seen to contain elements acquired by horizontal transfer. Nevertheless, there is probably a large, stable core of >3500 genes that are shared among all E. coli strains. The gene-enzyme relationship is examined, and, in many cases, it exhibits complexity beyond a simple one-to-one relationship. Also, the E. coli genome can now be seen to contain many multiple enzymes that carry out the same or closely similar reactions. Some are similar in sequence and may share common ancestry; some are not. We discuss the concept of a minimal genome as being variable among organisms and obligatorily linked to their life styles and defined environmental conditions. We also address classification of functions of gene products and avenues of insight into the history of protein evolution.

Insights into the rotary catalytic mechanism of F0F1 ATP synthase from the cross-linking of subunits b and c in the Escherichia coli enzyme

The transmembrane sector of the F(0)F(1) rotary ATP synthase is proposed to organize with an oligomeric ring of c subunits, which function as a rotor, interacting with two b subunits at the periphery of the ring, the b subunits functioning as a stator. In this study, cysteines were introduced into the C-terminal region of subunit c and the N-terminal region of subunit b. Cys of N2C subunit b was cross-linked with Cys at positions 74, 75, and 78 of subunit c. In each case, a maximum of 50% of the b subunit could be cross-linked to subunit c, which suggests that either only one of the two b subunits lie adjacent to the c-ring or that both b subunits interact with a single subunit c. The results support a topological arrangement of these subunits, in which the respective N- and C-terminal ends of subunits b and c extend to the periplasmic surface of the membrane and cAsp-61 lies at the center of the membrane. The cross-linking of Cys between bN2C and cV78C was shown to inhibit ATP-driven proton pumping, as would be predicted from a rotary model for ATP synthase function, but unexpectedly, cross-linking did not lead to inhibition of ATPase activity. ATP hydrolysis and proton pumping are therefore uncoupled in the cross-linked enzyme. The c subunit lying adjacent to subunit b was shown to be mobile and to exchange with c subunits that initially occupied non-neighboring positions. The movement or exchange of subunits at the position adjacent to subunit b was blocked by dicyclohexylcarbodiimide. These experiments provide a biochemical verification that the oligomeric c-ring can move with respect to the b-stator and provide further support for a rotary catalytic mechanism in the ATP synthase.

The structural and functional connection between the catalytic and proton translocating sectors of the mitochondrial F1F0-ATP synthase

The structural and functional connection between the peripheral catalytic F1 sector and the proton-translocating membrane sector F0 of the mitochondrial ATP synthase is reviewed. The observations examined show that the N-terminus of subunit gamma, the carboxy-terminal and central region of F0I-PVP(b), OSCP, and part of subunit d constitute a continuous structure, the lateral stalk, which connects the peripheries of F1 to F0 and surrounds the central element of the stalk, constituted by subunits gamma and delta. The ATPase inhibitor protein (IF1) binds at one side of the F1F0 connection. The carboxy-terminal segment of IF1 apparently binds to OSCP. The 42L-58K segment of IF1, which is per se the most active domain of the protein, binds at the surface of one of the three alpha/beta pairs of F1, thus preventing the cyclic interconversion of the catalytic sites required for ATP hydrolysis.

F1 and F0 connections in the bovine mitochondrial ATP synthase: the role of the of alpha subunit N-terminus, oligomycin-sensitivity conferring protein (OCSP) and subunit d

We have studied the functional effect of limited proteolysis by trypsin of the constituent subunits in the native and reconstituted F1F0 complex and isolated F1 of the bovine heart mitochondrial ATP synthase (EC 3.6.1.34). Chemical cross-linking of oligomycin-sensitivity conferring protein (OSCP) with other subunits of the ATP synthase and the consequent functional effects were also investigated. The results obtained show that the alpha subunit N-terminus is essential for the correct, functional connection of F1 to F0. The alpha-subunit N-terminus contacts OSCP which, in turn, contacts the F0I-PVP(b) and the F0-d subunits. The N-terminus of subunit alpha, OSCP, a segment of subunit d and the C-terminal and central region of F0I-PVP(b) subunits are peripherally located with respect to subunits gamma and delta which are completely shielded in the F1F0 complex against trypsin digestion. This qualifies the N-terminus of subunit alpha, OSCP, subunit d and F0I-PVP(b) as components of the lateral element of the stalk. These subunits, rather than being confined at one side of the complex which would leave most of the central part of the gamma subunit uncovered, surround the gamma and the delta subunits located in the central stalk.

Identification of lipid-accessible sites on the nephrops 16-kDa proteolipid incorporated into a hybrid vacuolar H(+)-ATPase: site-directed labeling with N-(1-Pyrenyl)cyclohexylcarbodiimide and fluorescence quenching analysis

Proton translocation by the vacuolar H(+)-ATPase is mediated by a multicopy transmembrane protein, the 16-kDa proteolipid. It is proposed to assemble in the membrane as a hexameric complex, with each polypeptide comprising four transmembrane helices. The fourth helix of the proteolipid contains an intramembrane acidic residue (Glu140) which is essential for proton translocation and is reactive toward N,N'-dicyclohexylcarbodiimide (DCCD). Current theoretical models of proton translocation by the vacuolar ATPase require that Glu140 should be protonated and in contact with the membrane lipid. In this study we present direct support for this hypothesis. Modification with the fluorescent DCCD analogue N-(1-pyrenyl)cyclohexylcarbodiimide, coupled to fluorescence quenching studies and bilayer depth measurements using the parallax method, was used to probe the position of Glu140 with respect to the bilayer. Glutamate residues were also introduced mutagenically as targets for the fluorescent probe in order to map additional lipid-accessible sites on the 16-kDa proteolipid. These data are consistent with a structural model of the 16-kDa proteolipid oligomer in which the key functional residue Glu140 and discrete faces of the second and third transmembrane helices of the 16-kDa proteolipid are exposed at the lipid-protein interface.

Site-directed cross-linking of b to the alpha, beta, and a subunits of the Escherichia coli ATP synthase

The b subunit dimer of the Escherichia coli ATP synthase, along with the delta subunit, is thought to act as a stator to hold the alpha(3)beta(3) hexamer stationary relative to the a subunit as the gammaepsilonc(9-12) complex rotates. Despite their essential nature, the contacts between b and the alpha, beta, and a subunits remain largely undefined. We have introduced cysteine residues individually at various positions within the wild type membrane-bound b subunit, or within b(24-156), a truncated, soluble version consisting only of the hydrophilic C-terminal domain. The introduced cysteine residues were modified with a photoactivatable cross-linking agent, and cross-linking to subunits of the F(1) sector or to complete F(1)F(0) was attempted. Cross-linking in both the full-length and truncated forms of b was obtained at positions 92 (to alpha and beta), and 109 and 110 (to alpha only). Mass spectrometric analysis of peptide fragments derived from the b(24-156)A92C cross-link revealed that cross-linking took place within the region of alpha between Ile-464 and Met-483. This result indicates that the b dimer interacts with the alpha subunit near a non-catalytic alpha/beta interface. A cysteine residue introduced in place of the highly conserved arginine at position 36 of the b subunit could be cross-linked to the a subunit of F(0) in membrane-bound ATP synthase, implying that at least 10 residues of the polar domain of b are adjacent to residues of a. Sites of cross-linking between b(24-156)A92C and beta as well as b(24-156)I109C and alpha are proposed based on the mass spectrometric data, and these sites are discussed in terms of the structure of b and its interactions with the rest of the complex.

The rotary binding change mechanism of ATP synthases

The F(0)F(1) ATP synthase functions as a rotary motor where subunit rotation driven by a current of protons flowing through F(0) drives the binding changes in F(1) that are required for net ATP synthesis. Recent work that has led to the identification of components of the rotor and stator is reviewed. In addition, a model is proposed to describe the transmission of energy from four proton transport steps to the synthesis of one ATP. Finally, some of the requirements for efficient energy coupling by a rotary binding change mechanism are considered.

Molecular models of the structural arrangement of subunits and the mechanism of proton translocation in the membrane domain of F(1)F(0) ATP synthase

Subunit c of the proton-transporting ATP synthase of Escherichia coli forms an oligomeric complex in the membrane domain that functions in transmembrane proton conduction. The arrangement of subunit c monomers in this oligomeric complex was studied by scanning mutagenesis. On the basis of these studies and structural information on subunit c, different molecular models for the potential arrangement of monomers in the c-oligomer are discussed. Intersubunit contacts in the F(0) domain that have been analysed in the past by chemical modification and mutagenesis studies are summarised. Transient contacts of the c-oligomer with subunit a might play a crucial role in the mechanism of proton translocation. Schematic models presented by several authors that interpret proton transport in the F(0) domain by a relative rotation of the c-subunit oligomer against subunit a are reviewed against the background of the molecular models of the oligomer.

Molecular mechanisms of rotational catalysis in the F(0)F(1) ATP synthase

Rotation of the F(0)F(1) ATP synthase gamma subunit drives each of the three catalytic sites through their reaction pathways. The enzyme completes three cycles and synthesizes or hydrolyzes three ATP for each 360 degrees rotation of the gamma subunit. Mutagenesis studies have yielded considerable information on the roles of interactions between the rotor gamma subunit and the catalytic beta subunits. Amino acid substitutions, such as replacement of the conserved gammaMet-23 by Lys, cause altered interactions between gamma and beta subunits that have dramatic effects on the transition state of the steady state ATP synthesis and hydrolysis reactions. The mutations also perturb transmission of specific conformational information between subunits which is important for efficient conversion of energy between rotation and catalysis, and render the coupling between catalysis and transport inefficient. Amino acid replacements in the transport domain also affect the steady state catalytic transition state indicating that rotation is involved in coupling to transport.

The ATP synthase of Escherichia coli: structure and function of F(0) subunits

In this review we discuss recent work from our laboratory concerning the structure and/or function of the F(0) subunits of the proton-translocating ATP synthase of Escherichia coli. For the topology of subunit a a brief discussion gives (i) a detailed picture of the C-terminal two-thirds of the protein with four transmembrane helices and the C terminus exposed to the cytoplasm and (ii) an evaluation of the controversial results obtained for the localization of the N-terminal region of subunit a including its consequences on the number of transmembrane helices. The structure of membrane-bound subunit b has been determined by circular dichroism spectroscopy to be at least 75% alpha-helical. For this purpose a method was developed, which allows the determination of the structure composition of membrane proteins in proteoliposomes. Subunit b was purified to homogeneity by preparative SDS gel electrophoresis, precipitated with acetone, and redissolved in cholate-containing buffer, thereby retaining its native conformation as shown by functional coreconstitution with an ac subcomplex. Monoclonal antibodies, which have their epitopes located within the hydrophilic loop region of subunit c, and the F(1) part are bound simultaneously to the F(0) complex without an effect on the function of F(0), indicating that not all c subunits are involved in F(1) interaction. Consequences on the coupling mechanism between ATP synthesis/hydrolysis and proton translocation are discussed.

Structural interpretations of F(0) rotary function in the Escherichia coli F(1)F(0) ATP synthase

F(1)F(0) ATP synthases are known to synthesize ATP by rotary catalysis in the F(1) sector of the enzyme. Proton translocation through the F(0) membrane sector is now proposed to drive rotation of an oligomer of c subunits, which in turn drives rotation of subunit gamma in F(1). The primary emphasis of this review will be on recent work from our laboratory on the structural organization of F(0), which proves to be consistent with the concept of a c(12) oligomeric rotor. From the NMR structure of subunit c and cross-linking studies, we can now suggest a detailed model for the organization of the c(12) oligomer in F(0) and some of the transmembrane interactions with subunits a and b. The structural model indicates that the H(+)-carrying carboxyl of subunit c is located between subunits of the c(12) oligomer and that two c subunits pack in a front-to-back manner to form the proton (cation) binding site. The proton carrying Asp61 side chain is occluded between subunits and access to it, for protonation and deprotonation via alternate entrance and exit half-channels, requires a swiveled opening of the packed c subunits and stepwise association with different transmembrane helices of subunit a. We suggest how some of the structural information can be incorporated into models of rotary movement of the c(12) oligomer during coupled synthesis of ATP in the F(1) portion of the molecule.

The role of the DELSEED motif of the beta subunit in rotation of F1-ATPase

F(1)-ATPase is a rotary motor protein, and ATP hydrolysis generates torque at the interface between the gamma subunit, a rotor shaft, and the alpha(3)beta(3) substructure, a stator ring. The region of conserved acidic "DELSEED" motif of the beta subunit has a contact with gamma subunit and has been assumed to be involved in torque generation. Using the thermophilic alpha(3)beta(3)gamma complex in which the corresponding sequence is DELSDED, we replaced each residue and all five acidic residues in this sequence with alanine. In addition, each of two conserved residues at the counterpart contact position of gamma subunit was also replaced. Surprisingly, all of these mutants rotated with as much torque as the wild-type. We conclude that side chains of the DELSEED motif of the beta subunit do not have a direct role in torque generation.

Secondary structure composition of reconstituted subunit b of the Escherichia coli ATP synthase

Subunit b of the Escherichia coli ATP synthase was isolated by preparative gel electrophoresis, acetone precipitated and after ion-pair extraction redissolved in a buffer either containing n-dodecyl-beta-D-maltoside or sodium cholate. The secondary structure of isolated subunit b was shown to be the same as within the FO complex, but was strongly dependent on the detergent used for replacement of the phospholipid environment. This was shown by an identical tryptic digestion pattern, which was strongly influenced by the detergent used for solubilization. An influence of the detergent n-dodecyl-beta-D-maltoside on the secondary structure of the hydrophilic part of subunit b was also shown for the soluble part of the polypeptide comprising residues Val25 to Leu156 (bsol) using CD spectroscopy. In order to determine the secondary structure of subunit b in its native conformation, isolated subunit b was reconstituted into E. coli lipid vesicles and analyzed with CD spectroscopy. The resulting spectrum revealed a secondary structure composition of 80% alpha helix together with 14% beta turn conformation. These results suggest that subunit b is not a rigid rod-like alpha helix simply linking F1 to FO, but rather provides an inherent flexibility for the storage of elastic energy within the second stalk generated by rotational movements within the F1FO complex.

A rotary molecular motor that can work at near 100% efficiency

A single molecule of F1-ATPase is by itself a rotary motor in which a central gamma-subunit rotates against a surrounding cylinder made of alpha3beta3-subunits. Driven by the three betas that sequentially hydrolyse ATP, the motor rotates in discrete 120 degree steps, as demonstrated in video images of the movement of an actin filament bound, as a marker, to the central gamma-subunit. Over a broad range of load (hydrodynamic friction against the rotating actin filament) and speed, the F1 motor produces a constant torque of ca. 40 pN nm. The work done in a 120 degree step, or the work per ATP molecule, is thus ca. 80 pN nm. In cells, the free energy of ATP hydrolysis is ca. 90 pN nm per ATP molecule, suggesting that the F1 motor can work at near 100% efficiency. We confirmed in vitro that F1 indeed does ca. 80 pN nm of work under the condition where the free energy per ATP is 90 pN nm. The high efficiency may be related to the fully reversible nature of the F1 motor: the ATP synthase, of which F1 is a part, is considered to synthesize ATP from ADP and phosphate by reverse rotation of the F1 motor. Possible mechanisms of F1 rotation are discussed.

How Fo-ATPase generates rotary torque

The F-ATPases synthesize ATP using a transmembrane ionmotive force (IMF) established by the electron transport chain. This transduction involves first converting the IMF to a rotary torque in the transmembrane Fo portion. This torque is communicated from Fo to the F1 portion where the energy is used to release the newly synthesized ATP from the catalytic sites according to Boyer's binding change mechanism. Here we explain the principle by which an IMF generates this rotary torque in the Fo ion engine.

Structure, functioning, and assembly of the ATP synthase in cells from patients with the T8993G mitochondrial DNA mutation. Comparison with the enzyme in Rho(0) cells completely lacking mtdna

The structure and functioning of the ATP synthase of human fibroblast cell lines with 91 and 100%, respectively, of the T8993G mutation have been studied, with MRC5 human fibroblasts and Rho(0) cells derived from this cell line as controls. ATP hydrolysis was normal but ATP synthesis was reduced by 60% in the 100% mutants. Both activities were highly oligomycin-sensitive. The levels of F(1)F(0) were close to normal, and the enzyme was stable. It is concluded that the loss of ATP synthesis is because of disruption of the proton translocation step within the F(0) part. This is supported by membrane potential measurements using the dye JC-1. Cells with a 91% mutation load grew well and showed only a 25% loss in ATP synthesis. This much reduced effect for only a 9% difference in mutation load mirrors the reduced pathogenicity in patients. F(1)F(0) has been purified for the first time from human cell lines. A partial complex was obtained from Rho(0) cells containing the F(1) subunits associated with several stalk, as well as F(0) subunits, including oligomycin sensitivity conferring protein, b, and c subunits. This partial complex no longer binds inhibitor protein.

Mutations in single hairpin units of genetically fused subunit c provide support for a rotary catalytic mechanism in F(0)F(1) ATP synthase

Previously, we generated genetically fused dimers and trimers of subunit c of the Escherichia coli ATP synthase based upon the precedent of naturally occurring dimers in V-type H(+)-transporting ATPases. The c(2) and c(3) oligomers have proven useful in testing hypothesis regarding the mechanism of energy coupling. In the first part of this paper, the uncoupling Q42E substitution has been introduced into the second loop of the c(2) dimer or the third loop of the c(3) trimer. Both mutant proteins proved to be as functional as the wild type c(2) dimer or wild type c(3) trimer. The results argue against an obligatory movement of the epsilon subunit between loops of monomeric subunit c in the c(12) oligomer during rotary catalysis. Rather, the results support the hypothesis that the c-epsilon connection remains fixed as the c-oligomer rotates. In the second section of this paper, we report on the effect of substitution of the proton translocating Asp(61) in every second helical hairpin of the c(2) dimer, or in every third hairpin of the c(3) trimer. Based upon the precedent of V-type ATPases, where the c(2) dimer occurs naturally with a single proton translocating carboxyl in every second hairpin, these modified versions of the E. coli c(2) and c(3) fused proteins were predicted to have a functional H(+)-transporting ATPase activity, with a reduced H(+)/ATP stoichiometry, but to be inactive as ATP synthases. A variety of Asp(61)-substituted proteins proved to lack either activity indicating that the switch in function in V-type ATPases is a consequence of more than a single substitution.

Staphylococcus aureus small colony variants, electron transport and persistent infections

Staphylococcus aureus can mutate to form a sub-population of bacteria known as small colony variants (SCVs). These bacteria have a characteristic phenotype defined by slow growth, the lack of pigment, an altered pattern of carbohydrate utilization, and a reduction in toxin production. This complex phenotype can be explained by deficiencies in electron transport. In clinical isolates, the most common mutations that affect electron transport are in the operons encoding menaquinone or heme biosynthesis. These isolates are responsible for persistent antibiotic resistant infections. The clinical presentation of these infections is readily explained by a reduction electron transport. SCVs survive within host cells, increasing the instances of recurrent infections and have a novel mechanism of resistance based upon their altered trans-membrane potential. Additionally, SCVs provide a connection between energy metabolism and toxin production. This link may operate through the bacteria responding to altered levels of NADH and ATP. A more complete understanding of these signaling pathways may provide new targets for the development of drugs to ameliorate staphylococcal virulence and disease.

Lengthening the second stalk of F(1)F(0) ATP synthase in Escherichia coli

In Escherichia coli F(1)F(0) ATP synthase, the two b subunits dimerize forming the peripheral second stalk linking the membrane F(0) sector to F(1). Previously, we have demonstrated that the enzyme could accommodate relatively large deletions in the b subunits while retaining function (Sorgen, P. L., Caviston, T. L., Perry, R. C., and Cain, B. D. (1998) J. Biol. Chem. 273, 27873-27878). The manipulations of b subunit length have been extended by construction of insertion mutations into the uncF(b) gene adding amino acids to the second stalk. Mutants with insertions of seven amino acids were essentially identical to wild type strains, and mutants with insertions of up to 14 amino acids retained biologically significant levels of activity. Membranes prepared from these strains had readily detectable levels of F(1)F(0)-ATPase activity and proton pumping activity. However, the larger insertions resulted in decreasing levels of activity, and immunoblot analysis indicated that these reductions in activity correlated with reduced levels of b subunit in the membranes. Addition of 18 amino acids was sufficient to result in the loss of F(1)F(0) ATP synthase function. Assuming the predicted alpha-helical structure for this area of the b subunit, the 14-amino acid insertion would result in the addition of enough material to lengthen the b subunit by as much as 20 A. The results of both insertion and deletion experiments support a model in which the second stalk is a flexible feature of the enzyme rather than a rigid rod-like structure.

The Na(+)-F(1)F(0)-ATPase operon from Acetobacterium woodii. Operon structure and presence of multiple copies of atpE which encode proteolipids of 8- and 18-kda

Eight genes (atpI, atpB, atpE(1), atpE(2), atpE(3), atpF, atpH, and atpA) upstream of and contiguous with the previously described genes atpG, atpD, and atpC were cloned from chromosomal DNA of Acetobacterium woodii. Northern blot analysis revealed that the eleven atp genes are transcribed as a polycistronic message. The atp operon encodes the Na(+)-F(1)F(0)-ATPase of A. woodii, as evident from a comparison of the biochemically derived N termini of the subunits with the amino acid sequences deduced from the DNA sequences. The molecular analysis revealed that all of the F(1)F(0)-encoding genes from Escherichia coli have homologs in the Na(+)-F(1)F(0)-ATPase operon from A. woodii, despite the fact that only six subunits were found in previous preparations of the enzyme from A. woodii. These results unequivocally prove that the Na(+)-ATPase from A. woodii is an enzyme of the F(1)F(0) class. Most interestingly, the gene encoding the proteolipid underwent quadruplication. Two gene copies (atpE(2) and atpE(3)) encode identical 8-kDa proteolipids. Two additional gene copies were fused to form the atpE(1) gene. Heterologous expression experiments as well as immunolabeling studies with native membranes revealed that atpE(1) encodes a duplicated 18-kDa proteolipid. This is the first demonstration of multiplication and fusion of proteolipid-encoding genes in F(1)F(0)-ATPase operons. Furthermore, AtpE(1) is the first duplicated proteolipid ever found to be encoded by an F(1)F(0)-ATPase operon.

Molecular architecture of the rotary motor in ATP synthase

Adenosine triphosphate (ATP) synthase contains a rotary motor involved in biological energy conversion. Its membrane-embedded F0 sector has a rotation generator fueled by the proton-motive force, which provides the energy required for the synthesis of ATP by the F1 domain. An electron density map obtained from crystals of a subcomplex of yeast mitochondrial ATP synthase shows a ring of 10 c subunits. Each c subunit forms an alpha-helical hairpin. The interhelical loops of six to seven of the c subunits are in close contact with the gamma and delta subunits of the central stalk. The extensive contact between the c ring and the stalk suggests that they may rotate as an ensemble during catalysis.

Helical interactions and membrane disposition of the 16-kDa proteolipid subunit of the vacuolar H(+)-ATPase analyzed by cysteine replacement mutagenesis

Theoretical mechanisms of proton translocation by the vacuolar H(+)-ATPase require that a transmembrane acidic residue of the multicopy 16-kDa proteolipid subunit be exposed at the exterior surface of the membrane sector of the enzyme, contacting the lipid phase. However, structural support for this theoretical mechanism is lacking. To address this, we have used cysteine mutagenesis to produce a molecular model of the 16-kDa proteolipid complex. Transmembrane helical contacts were determined using oxidative cysteine cross-linking, and accessibility of cysteines to the lipid phase was determined by their reactivity to the lipid-soluble probe N-(1-pyrenyl)maleimide. A single model for organization of the four helices of each monomeric proteolipid was the best fit to the experimental data, with helix 1 lining a central pore and helix 2 and helix 3 immediately external to it and forming the principal intermolecular contacts. Helix 4, containing the crucial acidic residue, is peripheral to the complex. The model is consistent not only with theoretical proton transport mechanisms, but has structural similarity to the dodecameric ring complex formed by the related 8-kDa proteolipid of the F(1)F(0)-ATPase. This suggests some commonality between the proton translocating mechanisms of the vacuolar and F(1)F(0)-ATPases.

The proteolipid of the A(1)A(0) ATP synthase from Methanococcus jannaschii has six predicted transmembrane helices but only two proton-translocating carboxyl groups

The proteolipid, a hydrophobic ATPase subunit essential for ion translocation, was purified from membranes of Methanococcus jannaschii by chloroform/methanol extraction and gel chromatography and was studied using molecular and biochemical techniques. Its apparent molecular mass as determined in SDS-polyacrylamide gel electrophoresis varied considerably with the conditions applied. The N-terminal sequence analysis made it possible to define the open reading frame and revealed that the gene is a triplication of the gene present in bacteria. In some of the proteolipids, the N-terminal methionine is excised. Consequently, two forms with molecular masses of 21,316 and 21,183 Da were determined by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry. The molecular and biochemical data gave clear evidence that the mature proteolipid from M. jannaschii is a triplication of the 8-kDa proteolipid present in bacterial F(1)F(0) ATPases and most archaeal A(1)A(0) ATPases. Moreover, the triplicated form lacks a proton-translocating carboxyl group in the first of three pairs of transmembrane helices. This finding puts in question the current view of the evolution of H(+) ATPases and has important mechanistic consequences for the structure and function of H(+) ATPases in general.

F0 complex of the Escherichia coli ATP synthase. Not all monomers of the subunit c oligomer are involved in F1 interaction

The antigenic determinants of mAbs against subunit c of the Escherichia coli ATP synthase were mapped by ELISA using overlapping synthetic heptapeptides. All epitopes recognized are located in the hydrophilic loop region and are as follows: 31-LGGKFLE-37, 35-FLEGAAR-41, 36-LEGAAR-41 and 36-LEGAARQ-42. Binding studies with membrane vesicles of different orientation revealed that all mAbs bind to everted membrane vesicles independent of the presence or absence of the F1 part. Although the hydrophilic region of subunit c and particularly the highly conserved residues A40, R41, Q42 and P43 are known to interact with subunits gamma and epsilon of the F1 part, the mAb molecules have no effect on the function of F0. Furthermore, it could be demonstrated that the F1 part and the mAb molecule(s) are bound simultaneously to the F0 complex suggesting that not all c subunits are involved in F1 interaction. From the results obtained, it can be concluded that this interaction is fixed, which means that subunits gamma and epsilon do not switch between the c subunits during catalysis and furthermore, a complete rotation of the subunit c oligomer modified with mAb(s) along the stator of the F1F0 complex, proposed to be composed of at least subunits b and delta, seems to be unlikely.

Bioenergetics of the Archaea

In the late 1970s, on the basis of rRNA phylogeny, Archaea (archaebacteria) was identified as a distinct domain of life besides Bacteria (eubacteria) and Eucarya. Though forming a separate domain, Archaea display an enormous diversity of lifestyles and metabolic capabilities. Many archaeal species are adapted to extreme environments with respect to salinity, temperatures around the boiling point of water, and/or extremely alkaline or acidic pH. This has posed the challenge of studying the molecular and mechanistic bases on which these organisms can cope with such adverse conditions. This review considers our cumulative knowledge on archaeal mechanisms of primary energy conservation, in relationship to those of bacteria and eucarya. Although the universal principle of chemiosmotic energy conservation also holds for Archaea, distinct features have been discovered with respect to novel ion-transducing, membrane-residing protein complexes and the use of novel cofactors in bioenergetics of methanogenesis. From aerobically respiring Archaea, unusual electron-transporting supercomplexes could be isolated and functionally resolved, and a proposal on the organization of archaeal electron transport chains has been presented. The unique functions of archaeal rhodopsins as sensory systems and as proton or chloride pumps have been elucidated on the basis of recent structural information on the atomic scale. Whereas components of methanogenesis and of phototrophic energy transduction in halobacteria appear to be unique to Archaea, respiratory complexes and the ATP synthase exhibit some chimeric features with respect to their evolutionary origin. Nevertheless, archaeal ATP synthases are to be considered distinct members of this family of secondary energy transducers. A major challenge to future investigations is the development of archaeal genetic transformation systems, in order to gain access to the regulation of bioenergetic systems and to overproducers of archaeal membrane proteins as a prerequisite for their crystallization.

Rotational coupling in the F0F1 ATP synthase

The F0F1 ATP synthase is a large multisubunit complex that couples translocation of protons down an electrochemical gradient to the synthesis of ATP. Recent advances in structural analyses have led to the demonstration that the enzyme utilizes a rotational catalytic mechanism. Kinetic and biochemical evidence is consistent with the expected equal participation of the three catalytic sites in the alpha 3 beta 3 hexamer, which operate in sequential, cooperative reaction pathways. The rotation of the core gamma subunit plays critical roles in establishing the conformation of the sites and the cooperative interactions. Mutational analyses have shown that the rotor subunits are responsible for coupling and in doing so transmit specific conformational information between transport and catalysis.

Defining the domain of binding of F1 subunit epsilon with the polar loop of F0 subunit c in the Escherichia coli ATP synthase

We have previously shown that the E31C-substituted epsilon subunit of F1 can be cross-linked by disulfide bond formation to the Q42C-substituted c subunit of F0 in the Escherichia coli F1F0-ATP synthase complex (Zhang, Y., and Fillingame, R. H. (1995) J. Biol. Chem. 270, 24609-24614). The interactions of subunits epsilon and c are thought to be central to the coupling of H+ transport through F0 to ATP synthesis in F1. To further define the domains of interaction, we have introduced additional Cys into subunit epsilon and subunit c and tested for cross-link formation following sulfhydryl oxidation. The results show that Cys, in a continuous stretch of residues 26-33 in subunit epsilon, can be cross-linked to Cys at positions 40, 42, and 44 in the polar loop region of subunit c. The results are interpreted, and the subunit interaction is modeled using the NMR and x-ray diffraction structures of the monomeric subunits together with information on the packing arrangement of subunit c in a ring of 12 subunits. In the model, residues 26-33 form a turn of antiparallel beta-sheet which packs between the polar loop regions of adjacent subunit c at the cytoplasmic surface of the c12 oligomer.

Structure of the membrane domain of subunit b of the Escherichia coli F0F1 ATP synthase

The structure of the N-terminal transmembrane domain (residues 1-34) of subunit b of the Escherichia coli F0F1-ATP synthase has been solved by two-dimensional 1H NMR in a membrane mimetic solvent mixture of chloroform/methanol/H2O (4:4:1). Residues 4-22 form an alpha-helix, which is likely to span the hydrophobic domain of the lipid bilayer to anchor the largely hydrophilic subunit b in the membrane. The helical structure is interrupted by a rigid bend in the region of residues 23-26 with alpha-helical structure resuming at Pro-27 at an angle offset by 20 degrees from the transmembrane helix. In native subunit b, the hinge region and C-terminal alpha-helical segment would connect the transmembrane helix to the cytoplasmic domain. The transmembrane domains of the two subunit b in F0 were shown to be close to each other by cross-linking experiments in which single Cys were substituted for residues 2-21 of the native subunit and b-b dimer formation tested after oxidation with Cu(II)(phenanthroline)2. Cys residues that formed disulfide cross-links were found with a periodicity indicative of one face of an alpha-helix, over the span of residues 2-18, where Cys at positions 2, 6, and 10 formed dimers in highest yield. A model for the dimer is presented based upon the NMR structure and distance constraints from the cross-linking data. The transmembrane alpha-helices are positioned at a 23 degrees angle to each other with the side chains of Thr-6, Gln-10, Phe-14, and Phe-17 at the interface between subunits. The change in direction of helical packing at the hinge region may be important in the functional interaction of the cytoplasmic domains.

Transient accumulation of elastic energy in proton translocating ATP synthase

ATP synthase is conceived as a rotatory engine with two reversible drives, the proton-transporting membrane portion, F0, and the catalytic peripheral portion, F1. They are mounted on a central shaft (subunit gamma) and held together by an eccentric bearing. It is established that the hydrolysis of three molecules of ATP in F1 drives the shaft over a full circle in three steps of 120 degrees each. Proton flow through F0 probably generates a 12-stepped rotation of the shaft so that four proton-translocating steps of 30 degrees each drive the synthesis of one molecule of ATP. We addressed the elasticity of the transmission between F0 and F1 in a model where the four smaller steps in F0 load a torsional spring which is only released under liberation of ATP from F1. The kinetic model of an elastic ATP synthase described a wealth of published data on the synthesis/hydrolysis of ATP by F0F1 and on proton conduction by F0 as function of the pH and the protonmotive force. The pK values of the proton-carrying group interacting with the acidic and basic sides of the membrane were estimated as 5.3-6.4 and 8.0-8.3, respectively.

ATP synthase: two motors, two fuels

FoF1 ATPase is the universal protein responsible for ATP synthesis. The enzyme comprises two reversible rotary motors: Fo is either an ion 'turbine' or an ion pump, and F1 is either a hydrolysis motor or an ATP synthesizer. Recent biophysical and biochemical studies have helped to elucidate the operating principles for both motors.

NMR studies of subunit c of the ATP synthase from Propionigenium modestum in dodecylsulphate micelles

The structure of the Na+, Li+ or H+-binding c subunit of the ATP synthase from Propionigenium modestum was studied by NMR. Subunit c in dodecylsulphate micelles consists of four alpha-helical segments, I-IV, that are connected by short linker peptides with non-regular secondary structures. We propose that helices I (V4-I26) and IV (I69-V85) are membrane-spanning structures, and that helices II and III and the intervening hydrophilic loop are located in the cytoplasm. The Na+-binding residues Q32, E65 and S66 are located in the I-->II and III-->IV helix connections, probably near the membrane surface on the cytoplasmic side.

ATP-synthase of Rhodobacter capsulatus: coupling of proton flow through F0 to reactions in F1 under the ATP synthesis and slip conditions

A stepwise increasing membrane potential was generated in chromatophores of the phototrophic bacterium Rhodobacter capsulatus by illumination with short flashes of light. Proton transfer through ATP-synthase (measured by electrochromic carotenoid bandshift and by pH-indicators) and ATP release (measured by luminescence of luciferin-luciferase) were monitored. The ratio between the amount of protons translocated by F0F1 and the ATP yield decreased with the flash number from an apparent value of 13 after the first flash to about 5 when averaged over three flashes. In the absence of ADP, protons slipped through F0F1. The proton transfer through F0F1 after the first flash contained two kinetic components, of about 6 ms and 20 ms both under the ATP synthesis conditions and under slip. The slower component of proton transfer was substantially suppressed in the absence of ADP. We attribute our observations to the mechanism of energy storage in the ATP-synthase needed to couple the transfer of four protons with the synthesis of one molecule of ATP. Most probably, the transfer of initial protons of each tetrad creates a strain in the enzyme that slows the translocation of the following protons.

Rotation of the epsilon subunit during catalysis by Escherichia coli FOF1-ATP synthase

We report evidence for catalysis-dependent rotation of the single epsilon subunit relative to the three catalytic beta subunits of functionally coupled, membrane-bound FOF1-ATP synthase. Cysteines substituted at beta380 and epsilon108 allowed rapid formation of a specific beta-epsilon disulfide cross-link upon oxidation. Consistent with a need for epsilon to rotate during catalysis, tethering epsilon to one of the beta subunits resulted in the inhibition of both ATP synthesis and hydrolysis. These activities were fully restored upon reduction of the beta-epsilon cross-link. As a more critical test for rotation, a subunit dissociation/reassociation procedure was used to prepare a beta-epsilon cross-linked hybrid F1 having epitope-tagged betaD380C subunits (betaflag) exclusively in the two noncross-linked positions. This allowed the beta subunit originally aligned with epsilon to form the cross-link to be distinguished from the other two betas. The cross-linked hybrid was reconstituted with FO in F1-depleted membranes. After reduction of the beta-epsilon cross-link and a brief period of catalytic turnover, reoxidation resulted in a significant amount of betaflag in the beta-epsilon cross-linked product. In contrast, exposure to ligands that bind to the catalytic site but do not allow catalysis resulted in the subsequent cross-linking of epsilon to the original untagged beta. Furthermore, catalysis-dependent rotation of epsilon was prevented by prior treatment of membranes with N,N'-dicyclohexylcarbodiimide to block proton translocation through FO. From these results, we conclude that epsilon is part of the rotor that couples proton transport to ATP synthesis.

The second stalk composed of the b- and delta-subunits connects F0 to F1 via an alpha-subunit in the Escherichia coli ATP synthase

The b- and delta-subunits of the Escherichia coli ATP synthase are critical for binding ECF1 to the F0 part, and appear to constitute the stator necessary for holding the alpha3beta3 hexamer as the c-epsilon-gamma domain rotates during catalysis. Previous studies have determined that the b-subunits are dimeric for a large part of their length, and interact with the F1 part through the delta-subunit (Rodgers, A. J. W., Wilkens, S., Aggeler, R., Morris, M. B., Howitt, S. M., and Capaldi, R. A. (1997) J. Biol. Chem. 272, 31058-31064). To further study b-subunit interactions, three mutants were constructed in which Ser-84, Ala-144, and Leu-156, respectively, were replaced by Cys. Treatment of purified ECF1F0 from all three mutants with CuCl2 induced disulfide formation resulting in b-subunit dimer cross-link products. In addition, the mutant bL156C formed a cross-link from a b-subunit to an alpha-subunit via alphaCys90. Neither b-b nor b-alpha cross-linking had significant effect on ATPase activities in any of the mutants. Proton pumping activities were measured in inner membranes from the three mutants. Dimerization of the b-subunit did not effect proton pumping in mutants bS84C or bA144C. In the mutant bL156C, CuCl2 treatment reduced proton pumping markedly, probably because of uncoupling caused by the b-alpha cross-link formation. The results show that the alpha-subunit forms part of the binding site on ECF1 for the b2delta domain and that the b-subunit extends all the way from the membrane to the top of the F1 structure. Some conformational flexibility in the connection between the second stalk and F1 appears to be required for coupled catalysis.