Calorimetric studies of the effects of cholesterol on the phase transition of C(18):C(10) phosphatidylcholine

Influence of archaeal lipids isolated from Aeropyrum pernix K1 on physicochemical properties of sphingomyelin-cholesterol liposomes

We investigated the influence of archaeal lipids (C25,25) isolated from thermophilic archaeon Aeropyrum pernix K1 on physicochemical properties of liposomes comprised of egg sphingomyelin (SM) and cholesterol (CH) using fluorescence emission anisotropy, calcein release studies, dynamic light scattering, transmission electron microscopy and phase analysis light scattering. The 2 mol% addition of archaeal lipids enabled formation of small unilamellar vesicles by sonication while also having significant effect on reducing mean size, polydispersity index and zeta potential of C25,25/SM/CH vesicles. Increasing the ratio of C25,25 lipids in mixture of C25,25/SM/CH decreased lipid ordering parameter in dose dependent manner at different temperatures. We also demonstrated that adding 15 mol% C25,25 to SM/CH mixture will cause it to notably interact with fetal bovine serum which could make them a viable alternative adjuvant to synthetic ether-linked lipids in development of advanced liposomal vaccine delivery systems. The prospect of combining the proven strengths of SM/CH mixtures with the unique properties of C25,25 opens exciting possibilities for advancing drug delivery technologies, promising to yield formulations that are both highly effective and adaptable to a range of therapeutic applications.

Sustained-release ketamine-loaded lipid-particulate system: in vivo assessment in mice

Ketamine is used as an analgesic adjuvant in patients with chronic cancer-related pain. However, ketamine's short half-life requires frequent dose administration. Our aim was to develop a sustained release formulation of ketamine with high loading and to evaluate the in vivo pharmacokinetics and biodistribution in mice. Here, ketamine hydrochloride sustained-release lipid particles (KSL) were developed using the thin-film hydration method. The mean (± SD) encapsulation efficiency (EE) and drug loading (DL) of KSL were 65.6 (± 1.7)% and 72.4 (± 0.5)% respectively, and the mean (± SD) size of the lipid particles and the polydispersity index were 738 (± 137) nm and 0.44 (± 0.02) respectively. The release period of KSL in pH 7.4 medium was 100% complete within 8 h in vitro but a sustained-release profile was observed for more than 5 days after intravenous injection in mice. Importantly, the KSL formulation resulted in a 27-fold increase in terminal half-life, a threefold increase in systemic exposure (AUC_0-∞), and a threefold decrease in clearance compared with the corresponding pharmacokinetics for intravenous ketamine itself. Our findings demonstrate high encapsulation efficiency of ketamine in the sustained-release KSL formulation with prolonged release in mice after systemic dose administration despite 100% in vitro release within 8 h that requires future investigation.

EDTA-Gradient Loading of Doxorubicin into Ferrocene-Containing Liposomes: Effect of Lipid Composition and Visualization of Triggered Release by Cryo-TEM

Efficient delivery of therapeutic compounds to their sites of action has been a ubiquitous concern throughout the history of human medicine. The tumor microenvironment offers a variety of endogenous stimuli that may be exploited by a responsive nanocarrier, including heterogeneities in redox potential. In the early stages of the design of such responsive delivery systems, it is necessary to develop a comprehensive understanding of the biophysical mechanism by which the stimulus response occurs, as well as how the response may change from the inclusion of cargo compounds. We describe the optimization of lipid compositions for liposomes containing synthetic ferrocene-appended lipids to achieve highly efficient loading of doxorubicin via an ethylenediaminetetraacetic acid (EDTA) gradient. Liposomes containing ferrocenylated phospholipid are shown to be unstable to the loading conditions, while those including a ferrocenylated alkylammonium amphiphile obtain a near-quantitative loading efficiency. Calorimetric studies demonstrate that this instability is the consequence of the relative degree of lipid hydrolysis that occurs under the acidic loading conditions. Drug-loaded liposomes of the optimized composition are studied by cryo-TEM; the presence of doxorubicin aggregates is observed inside vesicles, and doxorubicin release, as well as the changes in membrane structure resulting from oxidant treatment, is also observed by cryogenic transmission electron microscopy (cryo-TEM). These results further demonstrate the potential of ferrocene lipids in the design of redox-responsive nanocarriers and begin to explore their possible role as probes of membrane dynamics.

Reducing Bacterial Infections and Biofilm Formation Using Nanoparticles and Nanostructured Antibacterial Surfaces

With the rapid spreading of resistance among common bacterial pathogens, bacterial infections, especially antibiotic-resistant bacterial infections, have drawn much attention worldwide. In light of this, nanoparticles, including metal and metal oxide nanoparticles, liposomes, polymersomes, and solid lipid nanoparticles, have been increasingly exploited as both efficient antimicrobials themselves or as delivery platforms to enhance the effectiveness of existing antibiotics. In addition to the emergence of widespread antibiotic resistance, of equal concern are implantable device-associated infections, which result from bacterial adhesion and subsequent biofilm formation at the site of implantation. The ineffectiveness of conventional antibiotics against these biofilms often leads to revision surgery, which is both debilitating to the patient and expensive. Toward this end, micro- and nanotopographies, especially those that resemble natural surfaces, and nonfouling chemistries represent a promising combination for long-term antibacterial activity. Collectively, the use of nanoparticles and nanostructured surfaces to combat bacterial growth and infections is a promising solution to the growing problem of antibiotic resistance and biofilm-related device infections.

Preparation of Nanoparticles Including Antisolvent Drugs by the Combination of Roll Milling and High-pressure Homogenization

DESCRIPTION

Design methods of nanoparticle formulations are divided into break-down methods and build-up methods. The former is further divided into dry and wet processes. For drug nanoparticle preparations, the wet process is generally employed, and organic solvents are used in most formulations.

METHOD

In this study, we investigate the preparation of nifedipine (IB) and griseofulvin (GF) nanoparticles without using organic solvent. Both IB and GF nanoparticles, with a mean particle size of approximately 50 nm, were prepared without organic solvent by employing a combination of roll milling and high-pressure homogenization.

RESULT

The X-ray diffraction peak of the IB and GF samples prepared by roll milling was present at a position (2θ) identical to that of IB and GF crystals, indicating that no peak shift was induced by interaction with phospholipids.

CONCLUSION

These findings demonstrate that most IB and GF nanoparticles exist as crystals in phospholipids.

Choosing the right fluorophore for single-molecule fluorescence studies in a lipid environment

Nonspecific interactions between lipids and fluorophores can alter the outcomes of single-molecule spectroscopy of membrane proteins in live cells, liposomes or lipid nanodiscs and of cytosolic proteins encapsulated in liposomes or tethered to supported lipid bilayers. To gain insight into these effects, we examined interactions between 9 dyes that are commonly used as labels for single-molecule fluorescence (SMF) and 6 standard lipids including cationic, zwitterionic and anionic types. The diffusion coefficients of dyes in the absence and presence of set amounts of lipid vesicles were measured by fluorescence correlation spectroscopy (FCS). The partition coefficients and the free energies of partitioning for different fluorophore-lipid pairs were obtained by global fitting of the titration FCS curves. Lipids with different charges, head groups and degrees of chain saturation were investigated, and interactions with dyes are discussed in terms of hydrophobic, electrostatic and steric contributions. Fluorescence imaging of individual fluorophores adsorbed on supported lipid bilayers provides visualization and additional quantification of the strength of dye-lipid interaction in the context of single-molecule measurements. By dissecting fluorophore-lipid interactions, our study provides new insights into setting up single-molecule fluorescence spectroscopy experiments with minimal interference from interactions between fluorescent labels and lipids in the environment.

Unusual triskelion patterns and dye-labelled GUVs: consequences of the interaction of cholesterol-containing linear-hyperbranched block copolymers with phospholipids

Cholesterol (Ch) linked to a linear-hyperbranched block copolymer composed of poly(ethylene glycol) (PEG) and poly(glycerol) (hbPG) was investigated for its membrane anchoring properties. Two polyether-based linear-hyperbranched block copolymers with and without a covalently attached rhodamine fluorescence label (Rho) were employed (Ch-PEG30-b-hbPG23 and Ch-PEG30-b-hbPG17-Rho). Compression isotherms of co-spread 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) or 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) with the respective polymers were measured on the Langmuir trough and the morphology development of the liquid-condensed (LC) domains was studied by epi-fluorescence microscopy. LC domains were strongly deformed due to the localization of the polymers at the domain interface, indicating a line activity for both block copolymers. Simultaneously, it was observed that the presence of the fluorescence label significantly influences the domain morphology, the rhodamine labelled polymer showing higher line activity. Adsorption isotherms of the polymers to the water surface or to monolayers of DPPC and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC), respectively, were collected. Again the rhodamine labelled polymer showed higher surface activity and a higher affinity for insertion into lipid monolayers, which was negligibly affected when the sub-phase was changed to aqueous sodium chloride solution or phosphate buffer. Calorimetric investigations in bulk confirmed the results found using tensiometry. Confocal laser scanning microscopy (CLSM) of giant unilamellar vesicles (GUVs) also confirmed the polymers' fast adsorption to and insertion into phospholipid membranes.

Membrane binding and insertion of the predicted transmembrane domain of human scramblase 1

Human phospholipid scramblase 1 (SCR) was originally described as an intrinsic membrane protein catalyzing transbilayer phospholipid transfer in the absence of ATP. More recently, a role as a nuclear transcription factor has been proposed for SCR, either in addition or alternatively to its capacity to facilitate phospholipid flip-flop. Uncertainties exist as well from the structural point of view. A predicted α-helix (aa residues 288-306) located near the C-terminus has been alternatively proposed as a transmembrane domain, or as a protein core structural element. This paper explores the possibilities of the above helical segment as a transmembrane domain. To this aim two peptides were synthesized, one corresponding to the 19 α-helical residues, and one containing both the helix and the subsequent 12-residues constituting the C-end of the protein. The interaction of these peptides with lipid monolayers and bilayers was tested with Langmuir balance surface pressure measurements, proteoliposome reconstitution and analysis, differential scanning calorimetry, tests of bilayer permeability, and fluorescence confocal microscopy. Bilayers of 28 different lipid compositions were examined in which lipid electric charge, bilayer fluidity and lateral heterogeneity (domain formation) were varied. All the results concur in supporting the idea that the 288-306 peptide of SCR becomes membrane inserted in the presence of lipid bilayers. Thus, the data are in agreement with the possibility of SCR as an integral membrane protein, without rejecting alternative cell locations.

Liquid-ordered phases induced by cholesterol: a compendium of binary phase diagrams

Mixtures of phospholipids with cholesterol are able to form liquid-ordered phases that are characterised by short-range orientational order and long-range translational disorder. These L(o)-phases are distinct from the liquid-disordered, fluid L(alpha)-phases and the solid-ordered, gel L(beta)-phases that are assumed by the phospholipids alone. The liquid-ordered phase can produce spatially separated in-plane fluid domains, which, in the form of lipid rafts, are thought to act as platforms for signalling and membrane sorting in cells. The areas of domain formation are defined by the regions of phase coexistence in the phase diagrams for the binary mixtures of lipid with cholesterol. In this paper, the available binary phase diagrams of lipid-cholesterol mixtures are all collected together. It is found that there is not complete agreement between different determinations of the phase diagrams for the same binary mixture. This can be attributed to the indirect methods largely used to establish the phase boundaries. Intercomparison of the various data sets allows critical assessment of which phase boundaries are rigorously established from direct evidence for phase coexistence.

Characterization of the cationic DiC(14)-amidine bilayer by mixed DMPC/DiC(14)-amidine molecular dynamics simulations shows an interdigitated nonlamellar bilayer phase

DiC(14)-amidine (amidine) is a nonphysiological, cationic lipid that forms stable liposomes under physiological pH and temperature. Cationic lipids have been proposed as delivery vector for DNA, proteins, and drugs. Furthermore, amidine carries at present a particular interest due to its immunomodulatory properties. (1-3) Molecular dynamics simulations reveal a remarkable fluidity in the hydrophobic bilayer core, with a tendency for strong surface curvature, in agreement with the relatively small size of experimentally formed liposomes. The amidine bilayer shows an interdigitated, nonlamellar bilayer phase, with a bilayer thickness of only 2.7 nm and an average area per lipid of 0.83 nm(2). A cluster analysis of the individual lipid structures shows a thermally accessible population of V-shaped lipids, indicative of fusion capabilities with the plasma membrane. Fusion experiments confirm this hypothesis. The results are compared to the zwitterionic DMPC (dimyristoylphosphocholine), which also carries two saturated C(14) tails.

Cholesterol-sphingomyelin interactions: a molecular dynamics simulation study

Stearoylsphingomyelin (SSM) bilayers containing 0, 22, and 50 mol % cholesterol (Chol) and a pentadecanoyl-stearoylphosphatidylcholine (15SPC) bilayer containing 22 mol % Chol were molecular dynamics simulated at two temperatures (37 degrees C and 60 degrees C). 15SPC is the best PC equivalent of SSM. The Chol effect on the SSM bilayer differs significantly from that on the 15SPC bilayer. At the same temperature and Chol content, H-bonding of Chol with SSM is more extensive than with 15SPC. SSM-Chol H-bonding anchors the OH group of Chol in the lower regions of the SSM-Chol bilayer interface. Such a location strengthens the influence of Chol on the SSM chains. In effect, the phase of the SSM-Chol bilayer containing 22 mol % Chol at 37 degrees C is shifted from the gel to the liquid-ordered phase, and the bilayer displays similar properties below and above the main phase-transition temperature for a pure SSM bilayer of approximately 45 degrees C. In contrast, due to a higher location, Chol is not able to change the phase of the 15SPC-Chol bilayer, which at 37 degrees C remains in the gel phase. Chol affects both the core and interface of the SSM bilayer. With increasing Chol content, the order of SSM chains and hydration of SSM headgroups increase, whereas polar interactions between lipids decrease.

An index of lipid phase diagrams

There is a growing awareness of the utility of lipid phase behavior data in studies of membrane-related phenomena. Such miscibility information is commonly reported in the form of temperature-composition (T-C) phase diagrams. The current index is a conduit to the relevant literature. It lists lipid phase diagrams, their components and conditions of measurement, and complete bibliographic information. The main focus of the index is on lipids of membrane origin where water is the dispersing medium. However, it also includes records on acylglycerols, fatty acids, cationic lipids, and detergent-containing systems. The miscibility of synthetic and natural lipids with other lipids, with water, and with biomolecules (proteins, nucleic acids, carbohydrates, etc.) and non-biological materials (drugs, anesthetics, organic solvents, etc.) is within the purview of the index. There are 2188 phase diagram records in the index, the bulk (81%) of which refers to binary (two-component) T-C phase diagrams. The remainder is made up of more complex (ternary, quaternary) systems, pressure-T phase diagrams, and other more exotic miscibility studies. The index covers the period from 1965 through to July, 2001.

Phases and phase transitions of the phosphatidylcholines

LIPIDAT (http://www.lipidat.chemistry.ohio-state.edu) is an Internet accessible, computerized relational database providing access to the wealth of information scattered throughout the literature concerning synthetic and biologically derived polar lipid polymorphic and mesomorphic phase behavior and molecular structures. Here, a review of the data subset referring to phosphatidylcholines is presented together with an analysis of these data. This subset represents ca. 60% of all LIPIDAT records. It includes data collected over a 43-year period and consists of 12,208 records obtained from 1573 articles in 106 different journals. An analysis of the data in the subset identifies trends in phosphatidylcholine phase behavior reflecting changes in lipid chain length, unsaturation (number, isomeric type and position of double bonds), asymmetry and branching, type of chain-glycerol linkage (ester, ether, amide), position of chain attachment to the glycerol backbone (1,2- vs. 1,3-) and head group modification. Also included is a summary of the data concerning the effect of pressure, pH, stereochemical purity, and different additives such as salts, saccharides, amino acids and alcohols, on phosphatidylcholine phase behavior. Information on the phase behavior of biologically derived phosphatidylcholines is also presented. This review includes 651 references.

Flavonols--new fluorescent membrane probes for studying the interdigitation of lipid bilayers

Two flavonols, 3-hydroxy-4'-dimethylaminoflavone (FME) and 3-hydroxy-4'-(15-azacrown-5) flavone (FRC) have been investigated as new fluorescence probes for studying the formation of the interdigitated gel phase in lipid bilayers. The formation of the interdigitated gel phase in the saturated symmetrical phosphatidylcholines (PCs) and phosphatidylethanol (Peth) in the presence of ethanol has been well studied. The present study examines the behavior of these new probes in PC-ethanol and Peth-ethanol systems, as well as in PC-cholesterol and Peth-cholesterol vesicles. The present results demonstrate that both flavonols give distinctively different spectra in interdigitated lipid compared to non-interdigitated lipids, when examined in lipids in which the interdigitation behavior is known. This makes them useful for determinations of the structural state of unknown lipids, and for following the transitions between interdigitated and non-interdigitated phases. However, in the presence of cholesterol, only FCR gave appropriate indications of interdigitation. The results with FME in the presence of cholesterol were not consistent with the known behavior of the lipids examined; instead, FME appears to be located preferentially in the cholesterol-rich non-interdigitated regions of the bilayer.

Effect of cholesterol on the ethanol-induced interdigitated gel phase in phosphatidylcholine: use of fluorophore pyrene-labeled phosphatidylcholine

It is now recognized that many amphiphilic molecules such as ethanol can induce the formation of the fully interdigitated gel phase (L beta I) in phosphatidylcholines (PC's). In the present study, we have developed a simple detection method for the L beta I phase using pyrene-labeled PC (PyrPC), which is a PC analogue with covalently coupled pyrene moiety at the end of one of its acyl chains. The intensity ratio of its fluorescence vibrational bands is a reflection of the polarity of the environment of the fluorophore. We have tested this fluorophore in several established interdigitated lipid systems, including 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (1,2-DPPC) in the presence of high concentrations of ethanol and 1,2-di-O-hexadecyl-sn-glycero-3-phosphocholine (DHPC) and 1,3-dipalmitoyl-sn-glycero-2-phosphocholine (1,3-DPPC) in the absence of any additives. We have found in each of these systems that the ratio of the intensities of band III (387.5 nm) to band I (376.5 nm) is sensitive to the lipid phase change from the noninterdigitated L beta' phase to the interdigitated L beta I phase. By comparison of the III/I ratios for PyrPC in the lipid systems with the III/I ratios for methylpyrene in organic solvents, it was shown that the polarity of the PyrPC environment in the L beta I phase is similar to that of pentanol or ethanol. Using this method, we investigated the effect of cholesterol on the ethanol induction of the interdigitated gel phase in 1,2-DPPC. We found that the ethanol induction of the interdigitated gel phase is prevented by the presence of 20 mol % cholesterol.

Dynamic motions of 1,6-diphenyl-1,3,5-hexatriene in interdigitated C(18):C(10)phosphatidylcholine bilayers

This study investigates the dynamic behavior of 1,6-diphenyl-1,3,5-hexatriene (DPH) in C(18):C(10)phosphatidylcholine [C(18):C(10)PC] bilayers. C(18):C(10)PC is an asymmetric mixed-chain phosphatidylcholine known to form mixed-interdigitated structures below the transition temperature and form partially interdigitated bilayers above the transition temperature. The rotation of DPH in C(18):C(10)PC has been described in terms of the thermal coefficient of rotation using the modified Y-plot method which takes into account the limiting anisotropy value. During the phase transition of C(18):C(10)PC, DPH exhibits a thermal coefficient b2M = 0.41 - 0.51 degrees C-1 which is similar to the b2M values obtained with noninterdigitated phosphatidylcholine bilayers. Differential polarized phase-modulation fluorometry has also been employed to study the dynamic behavior of DPH in C(18):C(10)PC in real time. The data show that DPH contains considerable motion in the highly ordered mixed interdigitated bilayers. The DPH motion steadily increases with an increase in temperature as shown by the rotational correlation time, and the wobbling diffusion constant. However, the limiting anisotropy, the order parameter, and the width of the lifetime distribution undergo an abrupt decrease, and a corresponding abrupt increase in the cone angle, at approximately 16 degrees C. This temperature range is near the onset temperature of the phase transition as determined by differential scanning calorimetry. The rotational parameters show strong hysteresis on heating and cooling. All the rotational parameters derived from DPH fluorescence in mixed interdigitated C(18):C(10)PC exhibit magnitudes similar to those obtained from non interdigitated gel phases of symmetric diacylphosphatidylcholines. These results, combined with those obtained with dehydroergosterol (Kao, Y. L., P. L.-G. Chong, and C. Huang. 1990. Biochemistry. 29:1315-1322), suggest that considerable rotational mobility of small molecules can be sustained in an intramolecularly highly ordered interdigitated lipid matrix, implying that the membrane maintains a fluid environment around membrane perturbants even when the lipid matrix is extensively interdigitated.

Time-resolved fluorometric and differential scanning calorimetric investigation of dehydroergosterol in 1-stearoyl-2-caprylphosphatidylcholine bilayers

Thermal and dynamic properties of dehydroergosterol (DHE) in 1-stearoyl-2-capryl-sn-glycero-3-phosphocholine [C(18):C(10)PC] have been studied by differential scanning calorimetry (DSC) and multifrequency phase-modulation fluorometry. C(18):C(10)PC is an asymmetric mixed-chain phosphatidylcholine known to form highly ordered mixed interdigitated bilayers below the maximal transition temperature, Tm, and partially interdigitated bilayers above Tm. This lipid system is thus unique in assessing the interactions between sterols and interdigitated lipid bilayers. DHE is a fluorescent analogue of cholesterol shown in previous studies to behave like cholesterol in noninterdigitated symmetric diacylphosphatidylcholines. DSC data show that DHE exhibits similar characteristics to cholesterol [Chong & Choate (1989) Biophys. J. 55, 551-556] in C(18):C(10)PC bilayers. DHE abolishes the phase transition of C(18):C(10)PC at 27 mol % compared to 25 mol % for cholesterol and decreases Tm, the onset temperature (To), and the completion temperature (Tc), at a similar rate to cholesterol at about -0.25 degrees C per mole percent DHE. Fluorescence data show that the rotational motion of DHE can be described by a hindered anisotropic model. In the gel state of C(18):C(10)PC, the rotational correlation of DHE decreases monotonically with increasing DHE content up to 24 mol %, suggesting that DHE causes a disordering/spacing effect on the packing of mixed interdigitated C(18):C(10)PC bilayers. The rotational correlation time undergoes an abrupt increase from 24 to 27 mol % DHE. Abrupt changes in the DSC parameters were also observed in the neighborhood of 27 mol %, suggesting that major reorganization takes place around this concentration.(ABSTRACT TRUNCATED AT 250 WORDS)