Polymer-cushioned bilayers. I. A structural study of various preparation methods using neutron reflectometry

Cinematic reflectometry using QIKR, the quite intense kinetics reflectometer

The Quite Intense Kinetics Reflectometer (QIKR) will be a general-purpose, horizontal-sample-surface neutron reflectometer. Reflectometers measure the proportion of an incident probe beam reflected from a surface as a function of wavevector (momentum) transfer to infer the distribution and composition of matter near an interface. The unique scattering properties of neutrons make this technique especially useful in the study of soft matter, biomaterials, and materials used in energy storage. Exploiting the increased brilliance of the Spallation Neutron Source Second Target Station, QIKR will collect specular and off-specular reflectivity data faster than the best existing such machines. It will often be possible to collect complete specular reflectivity curves using a single instrument setting, enabling "cinematic" operation, wherein the user turns on the instrument and "films" the sample. Samples in time-dependent environments (e.g., temperature, electrochemical, or undergoing chemical alteration) will be observed in real time, in favorable cases with frame rates as fast as 1 Hz. Cinematic data acquisition promises to make time-dependent measurements routine, with time resolution specified during post-experiment data analysis. This capability will be deployed to observe such processes as in situ polymer diffusion, battery electrode charge-discharge cycles, hysteresis loops, and membrane protein insertion into lipid layers.

Humidity-Responsive Polymer Cushion-Supported Biomimetic Membrane: A Model System for X-ray Studies

An effort aimed at replacing the conventional water column by a relative humidity (RH) environment for structural investigation of a soft polymer cushion-supported model phospholipid membrane has been reported. An RH-responsive well-hydrated polymer cushion layer capable of approximately 2-fold swellability under RH 96% has been employed for phospholipid model membrane fabrication. To validate the proposed method, supported lipid bilayers (SLBs) of phosphocholine and phosphoethanolamine were deposited and structurally characterized at molecular level by the X-ray scattering method. In addition, the molecular interaction of the porphyrin-based hemin molecule, having a drug-like structure, with the supported membrane has been studied for further validation. The swelling behavior of the polymer cushion has been studied at a range of RH values prior to the bilayer deposition. The RH environment, in comparison to the conventional water column, enhanced the dynamic range approximately by 100-fold and the structural resolution by 2-fold. Thus, the bilayer structural features can be assessed without being overwhelmed by the background signals from the traditional water column. This facilitates in extracting reliable layer parameters and exogenous molecule-induced minute changes from the model fit. The proposed method will have far-reaching implications in biosensor engineering, protein-lipid, and drug-lipid interaction studies, X-ray microscopy, imaging, and photon correlation spectroscopy studies from SLBs where acquiring sufficient scattered intensity is still a challenge. This study also predicts that lab-based rotating-anode X-ray instruments can potentially be an alternative to the hard-access synchrotron experiments on biomimetic membranes, keeping the dynamic range and structural resolution uncompromised.

Small-Angle Neutron Scattering for Studying Lipid Bilayer Membranes

Small-angle neutron scattering (SANS) is a powerful tool for studying biological membranes and model lipid bilayer membranes. The length scales probed by SANS, being from 1 nm to over 100 nm, are well-matched to the relevant length scales of the bilayer, particularly when it is in the form of a vesicle. However, it is the ability of SANS to differentiate between isotopes of hydrogen as well as the availability of deuterium labeled lipids that truly enable SANS to reveal details of membranes that are not accessible with the use of other techniques, such as small-angle X-ray scattering. In this work, an overview of the use of SANS for studying unilamellar lipid bilayer vesicles is presented. The technique is briefly presented, and the power of selective deuteration and contrast variation methods is discussed. Approaches to modeling SANS data from unilamellar lipid bilayer vesicles are presented. Finally, recent examples are discussed. While the emphasis is on studies of unilamellar vesicles, examples of the use of SANS to study intact cells are also presented.

Biosensors Based on Bio-Functionalized Semiconducting Metal Oxides

Immobilization of biomaterials is a very important task in the development of biofuel cells and biosensors. Some semiconducting metal-oxide-based supporting materials can be used in these bioelectronics-based devices. In this article, we are reviewing some functionalization methods that are applied for the immobilization of biomaterials. The most significant attention is paid to the immobilization of biomolecules on the surface of semiconducting metal oxides. The improvement of biomaterials immobilization on metal oxides and analytical performance of biosensors by coatings based on conducting polymers, self-assembled monolayers and lipid membranes is discussed.

Aspects of Biological Replication and Evolution Independent of the Central Dogma: Insights from Protein-Free Vesicular Transformations and Protein-Mediated Membrane Remodeling

Biological membrane remodeling is central to living systems. In spite of serving as “containers” of whole-living systems and functioning as dynamic compartments within living systems, biological membranes still find a “blue collar” treatment compared to the “white collar” nucleic acids and proteins in biology. This may be attributable to the fact that scientific literature on biological membrane remodeling is only 50 years old compared to ~ 150 years of literature on proteins and a little less than 100 years on nucleic acids. However, recently, evidence for symbiotic origins of eukaryotic cells from data only on biological membranes was reported. This, coupled with appreciation of reproducible amphiphilic self-assemblies in aqueous environments (mimicking replication), has already initiated discussions on origins of life beyond nucleic acids and proteins. This work presents a comprehensive compilation and meta-analyses of data on self-assembly and vesicular transformations in biological membranes—starting from model membranes to establishment of Influenza Hemagglutinin-mediated membrane fusion as a prototypical remodeling system to a thorough comparison between enveloped mammalian viruses and cellular vesicles. We show that viral membrane fusion proteins, in addition to obeying “stoichiometry-driven protein folding”, have tighter compositional constraints on their amino acid occurrences than general-structured proteins, regardless of type/class. From the perspective of vesicular assemblies and biological membrane remodeling (with and without proteins) we find that cellular vesicles are quite different from viruses. Finally, we propose that in addition to pre-existing thermodynamic frameworks, kinetic considerations in de novo formation of metastable membrane structures with available “third-party” constituents (including proteins) were not only crucial for origins of life but also continue to offer morphological replication and/or functional mechanisms in modern life forms, independent of the central dogma.

The dynamic face of lipid membranes

Cell membranes - primarily composed of lipids, sterols, and proteins - form a dynamic interface between living cells and their environment. They act as a mechanical barrier around the cell while selectively facilitating material transport, signal transduction, and various other functions necessary for the cell viability. The complex functionality of cell membranes and the hierarchical motions and responses they exhibit demand a thorough understanding of the origin of different membrane dynamics and how they are influenced by molecular additives and environmental cues. These dynamic modes include single-molecule diffusion, thermal fluctuations, and large-scale membrane deformations, to name a few. This review highlights advances in investigating structure-driven dynamics associated with model cell membranes, with a particular focus on insights gained from neutron scattering and spectroscopy experiments. We discuss the uniqueness of neutron contrast variation and its remarkable potential in probing selective membrane structure and dynamics on spatial and temporal scales over which key biological functions occur. We also present a summary of current and future opportunities in synergistic combinations of neutron scattering with molecular dynamics (MD) simulations to gain further understanding of the molecular mechanisms underlying complex membrane functions.

The Whole Is Bigger than the Sum of Its Parts: Drug Transport in the Context of Two Membranes with Active Efflux

Cell envelope plays a dual role in the life of bacteria by simultaneously protecting it from a hostile environment and facilitating access to beneficial molecules. At the heart of this ability lie the restrictive properties of the cellular membrane augmented by efflux transporters, which preclude intracellular penetration of most molecules except with the help of specialized uptake mediators. Recently, kinetic properties of the cell envelope came into focus driven on one hand by the urgent need in new antibiotics and, on the other hand, by experimental and theoretical advances in studies of transmembrane transport. A notable result from these studies is the development of a kinetic formalism that integrates the Michaelis-Menten behavior of individual transporters with transmembrane diffusion and offers a quantitative basis for the analysis of intracellular penetration of bioactive compounds. This review surveys key experimental and computational approaches to the investigation of transport by individual translocators and in whole cells, summarizes key findings from these studies and outlines implications for antibiotic discovery. Special emphasis is placed on Gram-negative bacteria, whose envelope contains two separate membranes. This feature sets these organisms apart from Gram-positive bacteria and eukaryotic cells by providing them with full benefits of the synergy between slow transmembrane diffusion and active efflux.

Hybrid bilayer membranes on metallurgical polished aluminum

In this work we describe the functionalization of metallurgically polished aluminum surfaces yielding biomimetic electrodes suitable for probing protein/phospholipid interactions. The functionalization involves two simple steps: silanization of the aluminum and subsequent fusion of multilamellar vesicles which leads to the formation of a hybrid bilayer lipid membrane (hBLM). The vesicle fusion was followed in real-time by fast Fourier transform electrochemical impedance spectroscopy (FFT EIS). The impedance-derived complex capacitance of the hBLMs was approximately 0.61 µF cm⁻², a value typical for intact phospholipid bilayers. We found that the hBLMs can be readily disrupted if exposed to > 400 nM solutions of the pore-forming peptide melittin. However, the presence of cholesterol at 40% (mol) in hBLMs exhibited an inhibitory effect on the membrane-damaging capacity of the peptide. The melittin-membrane interaction was concentration dependent decreasing with concentration. The hBLMs on Al surface can be regenerated multiple times, retaining their dielectric and functional properties essentially intact.

Characterizing the Structure and Interactions of Model Lipid Membranes Using Electrophysiology

The cell membrane is a protective barrier whose configuration determines the exchange both between intracellular and extracellular regions and within the cell itself. Consequently, characterizing membrane properties and interactions is essential for advancements in topics such as limiting nanoparticle cytotoxicity. Characterization is often accomplished by recreating model membranes that approximate the structure of cellular membranes in a controlled environment, formed using self-assembly principles. The selected method for membrane creation influences the properties of the membrane assembly, including their response to electric fields used for characterizing transmembrane exchanges. When these self-assembled model membranes are combined with electrophysiology, it is possible to exploit their non-physiological mechanics to enable additional measurements of membrane interactions and phenomena. This review describes several common model membranes including liposomes, pore-spanning membranes, solid supported membranes, and emulsion-based membranes, emphasizing their varying structure due to the selected mode of production. Next, electrophysiology techniques that exploit these structures are discussed, including conductance measurements, electrowetting and electrocompression analysis, and electroimpedance spectroscopy. The focus of this review is linking each membrane assembly technique to the properties of the resulting membrane, discussing how these properties enable alternative electrophysiological approaches to measuring membrane characteristics and interactions.

Biomembrane Structure and Material Properties Studied With Neutron Scattering

Cell membranes and their associated structures are dynamical supramolecular structures where different physiological processes take place. Detailed knowledge of their static and dynamic structures is therefore needed, to better understand membrane biology. The structure–function relationship is a basic tenet in biology and has been pursued using a range of different experimental approaches. In this review, we will discuss one approach, namely the use of neutron scattering techniques as applied, primarily, to model membrane systems composed of lipid bilayers. An advantage of neutron scattering, compared to other scattering techniques, is the differential sensitivity of neutrons to isotopes of hydrogen and, as a result, the relative ease of altering sample contrast by substituting protium for deuterium. This property makes neutrons an ideal probe for the study of hydrogen-rich materials, such as biomembranes. In this review article, we describe isotopic labeling studies of model and viable membranes, and discuss novel applications of neutron contrast variation in order to gain unique insights into the structure, dynamics, and molecular interactions of biological membranes. We specifically focus on how small-angle neutron scattering data is modeled using different contrast data and molecular dynamics simulations. We also briefly discuss neutron reflectometry and present a few recent advances that have taken place in neutron spin echo spectroscopy studies and the unique membrane mechanical data that can be derived from them, primarily due to new models used to fit the data.

Structure and Hydration of Asymmetric Polyelectrolyte Multilayers as Studied by Neutron Reflectometry: Connecting Multilayer Structure to Superior Membrane Performance

Porous membranes coated with so-called asymmetric polyelectrolyte multilayers (PEMs) have recently been shown to outperform commercial membranes for micropollutant removal. They consist of open support layers of poly(styrene sulfonate) (PSS)/poly(allylamine) (PAH) capped by denser and more selective layers of either PAH/poly(acrylic acid) (PAA) or PAH/Nafion. Unfortunately, the structure of these asymmetric PEMs, and thus their superior membrane performance, is poorly understood. In this work, neutron reflectometry (NR) is employed to elucidate the multilayered structure and hydration of these asymmetric PEMs. NR reveals that the multilayers are indeed asymmetric in structure, with distinct bottom and top multilayers when air-dried and when solvated. The low hydration of the top [PAH/Nafion] multilayer, together with the low water permeance of comparable [PAH/Nafion]-capped PEM membranes, demonstrate that it is a reduction in hydration that makes these separation layers denser and more selective. In contrast, the [PAH/PAA] capping multilayers are more hydrated than the support [PSS/PAH] layers, signifying that, here, densification of the separation layer occurs through a decrease in the mesh size (or effective pore size) of the top layer due to the higher charge density of the PAH/PAA couple compared to the PSS/PAH couple. The [PAH/PAA] and [PAH/Nafion] separation layers are extremely thin (∼4.5 and ∼7 nm, respectively), confirming that these asymmetric PEM membranes have some of the thinnest separation layers ever achieved.

Recent Advances in Hybrid Biomimetic Polymer-Based Films: from Assembly to Applications

Biological membranes, in addition to being a cell boundary, can host a variety of proteins that are involved in different biological functions, including selective nutrient transport, signal transduction, inter- and intra-cellular communication, and cell-cell recognition. Due to their extreme complexity, there has been an increasing interest in developing model membrane systems of controlled properties based on combinations of polymers and different biomacromolecules, i.e., polymer-based hybrid films. In this review, we have highlighted recent advances in the development and applications of hybrid biomimetic planar systems based on different polymeric species. We have focused in particular on hybrid films based on (i) polyelectrolytes, (ii) polymer brushes, as well as (iii) tethers and cushions formed from synthetic polymers, and (iv) block copolymers and their combinations with biomacromolecules, such as lipids, proteins, enzymes, biopolymers, and chosen nanoparticles. In this respect, multiple approaches to the synthesis, characterization, and processing of such hybrid films have been presented. The review has further exemplified their bioengineering, biomedical, and environmental applications, in dependence on the composition and properties of the respective hybrids. We believed that this comprehensive review would be of interest to both the specialists in the field of biomimicry as well as persons entering the field.

Spontaneous Formation of Cushioned Model Membranes Promoted by an Intrinsically Disordered Protein

In this article, it is shown that by exposing commonly used lipids for biomembrane mimicking studies, to a solution containing the histidine-rich intrinsically disordered protein histatin 5, a protein cushion spontaneously forms underneath the bilayer. The underlying mechanism is attributed to have an electrostatic origin, and it is hypothesized that the observed behavior is due to proton charge fluctuations promoting attractive electrostatic interactions between the positively charged proteins and the anionic surfaces, with concomitant counterion release. Hence, we anticipate that this novel "green" approach of forming cushioned bilayers can be an important tool to mimic the cell membrane without the disturbance of the solid substrate, thereby achieving a further understanding of protein-cell interactions.

Confocal Raman Microscopy Investigation of Phospholipid Monolayers Deposited on Nitrile-Modified Surfaces in Porous Silica Particles

Phospholipid bilayers deposited on a variety of surfaces provide models for investigation of the lipid membrane structure and supports for biocompatible sensors. Hybrid-supported phospholipid bilayers (HSLBs) are stable membrane models for these investigations, typically prepared by self-assembly of a lipid monolayer over an n-alkane-modified surface. HSLBs have been prepared on n-alkyl chain-modified silica and used for lipophilicity-based chromatographic separations. The structure of these hybrid bilayers differs from vesicle membranes where the lipid head group spacing is greater due to interdigitation of the lipid acyl chains with the underlying n-alkyl chains bound to the silica surface. This interdigitated structure exhibits a broader melting transition at a higher temperature due to strong interactions between the lipid acyl chains and the immobile n-alkyl chains bound to silica. In the present work, we seek to reduce the interactions between a lipid monolayer and its supporting substrate by self-assembly of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) on porous silica functionalized with nitrile-terminated surface ligands. The frequency of Raman scattering of the surface -C≡N stretching mode at the lipid-nitrile interface is consistent with an n-alkane-like environment and insensitive to lipid head group charge, indicating that the lipid acyl chains are in contact with the surface nitrile groups. The head group area of this lipid monolayer was determined from the within-particle phospholipid concentration and silica specific surface area and found to be 54 ± 2 Ų, equivalent to the head group area of a DMPC vesicle bilayer. The structure of these nitrile-supported phospholipid monolayers was characterized below and above their melting transition by confocal Raman microscopy and found to be nearly identical to DMPC vesicle bilayers. Their narrow gel-to-fluid-phase melting transition is equivalent to dispersed DMPC vesicles, suggesting that the acyl chain structure on the nitrile support mimics the outer leaflet structure of a vesicle membrane.

Interplays of Interfacial Forces Modulate Structure and Function of Soft and Biological Matters in Aquatic Environments

Water had been considered as a passive matrix that merely fills up the space, supporting the diffusion of solute molecules. In the past several decades, a number of studies have demonstrated that water play vital roles in regulating structural orders of biological systems over several orders of magnitude. Water molecules take versatile structures, many of which are transient. Water molecules act as hydrogen bond donors as well as acceptors and biochemical reactions utilize water molecules as nucleophiles. Needless to say, the same principle holds for the synthetic materials that function under water: the conformation, dynamics and functions of molecules are significantly influenced by the surrounding water. This review sheds light on how the structure and function of soft and biological matter in aquatic environments are modulated by the orchestration of various interfacial forces.

A platform for light-controlled formation of free-stranding lipid membranes

The engineering of artificial cells is one of the most significant scientific challenges. Thus, controlled fabrication and in situ monitoring of biomimetic nanoscale objects are among the central issues in current science and technology. Studies of transmembrane channels and cell mechanics often require the formation of lipid bilayers (LBs), their modification and their transfer to a particular place. We present here a novel approach for remotely controlled manipulation of LBs. Layer-by-layer deposition of polyethyleneimine and poly(sodium 4-styrenesulfonate) on a nanostructured TiO 2 photoanode was performed to obtain a surface with the desired net charge and to enhance photocatalytic performance. The LB was deposited on top of a multi-layer positive polymer cushion by the dispersion of negative vesicles. The separation distance between the electrostatically linked polyelectrolyte cushion and the LB can be adjusted by changing the environmental pH, as zwitter-ionic lipid molecules undergo pH-triggered charge-shifting. Protons were generated remotely by photoanodic water decomposition on the TiO 2 surface under 365 nm illumination. The resulting pH gradient was characterized by scanning vibrating electrode and scanning ion-selective electrode techniques. The light-induced reversible detachment of the LB from the polymer-cushioned photoactive substrate was found to correlate with suggested impedance models.

Measurements of Ion Binding to Lipid-Hosted Ionophores by Affinity Chromatography

The binding affinity between antibiotic ionophores and alkali ions within supported lipid bilayers was evaluated using affinity chromatography. We used zonal elution and frontal analysis methods in nanovolume liquid chromatography to characterize the binding selectivity of the carrier and channel ionophores valinomycin and gramicidin A within different phosphatidylcholine bilayers. Distinct binding sensitivity to the lipid phase, both in affinity and selectivity, is observed for valinomycin, whereas gramicidin is less sensitive to changes in a membrane environment, behavior that is consistent with ion binding occurring within the interior of an established channel. There is good agreement between the chromatographic retention and the reported binding selectivity measured by other techniques. Surface potential near the binding site affects ion retention and the apparent association binding constants, but not the binding selectivity or enthalpy measurements. A model accounting for the surface potential contributions of retained ions during frontal analyses yields values close to intrinsic binding constants for gramicidin A (K_A for K⁺ between 70 and 120 M^-1) using reasonable estimates of the initial potential that is postulated to arise from the underlying silica.

Neutron scattering in the biological sciences: progress and prospects

The scattering of neutrons can be used to provide information on the structure and dynamics of biological systems on multiple length and time scales. Pursuant to a National Science Foundation-funded workshop in February 2018, recent developments in this field are reviewed here, as well as future prospects that can be expected given recent advances in sources, instrumentation and computational power and methods. Crystallography, solution scattering, dynamics, membranes, labeling and imaging are examined. For the extraction of maximum information, the incorporation of judicious specific deuterium labeling, the integration of several types of experiment, and interpretation using high-performance computer simulation models are often found to be particularly powerful.

Reversibly Attached Phospholipid Bilayer-Functionalized Membrane Pores

We report the development of reversibly attached phospholipid bilayer (PLB)-functionalized membrane pores that enabled reusability of the membrane matrix as well as the phospholipid. The functionalized architecture was constructed based on electrostatic interactions, which facilitate the reversible attachment-detachment sequence of the functional moieties within membrane pores. To demonstrate potential application, an enzyme, glucose oxidase (GOx), was electrostatically immobilized within the PLB-functionalized membrane and enzymatic catalysis was conducted under the convective flow mode. The GOx-immobilized membrane demonstrated satisfactory activity and stability. Convective flow of the substrate solution resulted in significantly higher activity than diffusive flow. Then, the enzyme was detached keeping the functional PLB backbone intact. Detachment of the enzyme without affecting the functional activity of PLB backbone permits attachment of fresh enzyme. In addition, reusability of the phospholipids is also of great importance as they have wide range of applications, but their usage is limited by higher cost. We have demonstrated the detachment of the PLB from the membrane using a simple technique. Characterization of the detached phospholipid confirmed retention of the original structural and functional properties as exhibited before attachment. To the best of our knowledge, this is the first study on reversible PLB formation within membrane pores and demonstration of a detachment technique, while maintaining the structural and functional properties of the phospholipid.

Tunable cell-surface mimetics as engineered cell substrates

Most recent breakthroughs in understanding cell adhesion, cell migration, and cellular mechanosensitivity have been made possible by the development of engineered cell substrates of well-defined surface properties. Traditionally, these substrates mimic the extracellular matrix (ECM) environment by the use of ligand-functionalized polymeric gels of adjustable stiffness. However, such ECM mimetics are limited in their ability to replicate the rich dynamics found at cell-cell contacts. This review focuses on the application of cell surface mimetics, which are better suited for the analysis of cell adhesion, cell migration, and cellular mechanosensitivity across cell-cell interfaces. Functionalized supported lipid bilayer systems were first introduced as biomembrane-mimicking substrates to study processes of adhesion maturation during adhesion of functionalized vesicles (cell-free assay) and plated cells. However, while able to capture adhesion processes, the fluid lipid bilayer of such a relatively simple planar model membrane prevents adhering cells from transducing contractile forces to the underlying solid, making studies of cell migration and cellular mechanosensitivity largely impractical. Therefore, the main focus of this review is on polymer-tethered lipid bilayer architectures as biomembrane-mimicking cell substrate. Unlike supported lipid bilayers, these polymer-lipid composite materials enable the free assembly of linkers into linker clusters at cellular contacts without hindering cell spreading and migration and allow the controlled regulation of mechanical properties, enabling studies of cellular mechanosensitivity. The various polymer-tethered lipid bilayer architectures and their complementary properties as cell substrates are discussed.

Exploring Molecular-Biomembrane Interactions with Surface Plasmon Resonance and Dual Polarization Interferometry Technology: Expanding the Spotlight onto Biomembrane Structure

The molecular analysis of biomolecular-membrane interactions is central to understanding most cellular systems but has emerged as a complex technical challenge given the complexities of membrane structure and composition across all living cells. We present a review of the application of surface plasmon resonance and dual polarization interferometry-based biosensors to the study of biomembrane-based systems using both planar mono- or bilayers or liposomes. We first describe the optical principals and instrumentation of surface plasmon resonance, including both linear and extraordinary transmission modes and dual polarization interferometry. We then describe the wide range of model membrane systems that have been developed for deposition on the chips surfaces that include planar, polymer cushioned, tethered bilayers, and liposomes. This is followed by a description of the different chemical immobilization or physisorption techniques. The application of this broad range of engineered membrane surfaces to biomolecular-membrane interactions is then overviewed and how the information obtained using these techniques enhance our molecular understanding of membrane-mediated peptide and protein function. We first discuss experiments where SPR alone has been used to characterize membrane binding and describe how these studies yielded novel insight into the molecular events associated with membrane interactions and how they provided a significant impetus to more recent studies that focus on coincident membrane structure changes during binding of peptides and proteins. We then discuss the emerging limitations of not monitoring the effects on membrane structure and how SPR data can be combined with DPI to provide significant new information on how a membrane responds to the binding of peptides and proteins.

Polyelectrolyte multilayer-cushioned fluid lipid bilayers: a parachute model

Lipid bilayer membranes supported on polyelectrolyte multilayers are widely used as a new biomembrane model that connects biological and artificial materials since these ultrathin polyelectrolyte supports may mimic the role of the extracellular matrix and cell skeleton in living systems. Polyelectrolyte multilayers were fabricated by a layer-by-layer self-assembly technique. A quartz crystal microbalance with dissipation was used in real time to monitor the interaction between phospholipids and polyelectrolytes in situ on a planar substrate. The surface properties of polyelectrolyte films were investigated by the measurement of contact angles and zeta potential. Phospholipid charge, buffer pH and substrate hydrophilicity were proved to be essential for vesicle adsorption, rupture, fusion and formation of continuous lipid bilayers on the polyelectrolyte multilayers. The results clearly demonstrated that only the mixture of phosphatidylcholine and phosphatidic acid (4 : 1) resulted in fluid bilayers on chitosan and alginate multilayers with chitosan as a top layer at pH 6.5. A coarse-grained molecular simulation study elucidated that the exact mechanism of the formation of fluid lipid bilayers resembles a "parachute" model. As the closest model to the real membrane, polyelectrolyte multilayer-cushioned fluid lipid bilayers can be appropriate candidates for application in biomedical fields.

Self-spreading method for forming lipid bilayer on a patterned agarose gel: Toward precise lipid bilayer patterning

Forming artificial cell membranes is a suitable strategy for studying drug responses of membrane proteins. In order to form lipid bilayer with both mechanical stability and membrane protein functions, hydrogel supported bilayer has attracted attentions. Combinational use of self-extraction method for lipid bilayer formation and agarose gel patterning should realize hydrogel-supported bilayer with any shape and large area. In this study, we aimed to form a lipid bilayer on a patterned agarose gel and to characterize the membrane. First, lipid mixture was attached on an agarose gel, and lipid layers spread on the gel surface. With fluorescent observation, it is suggested that thin lipid layer was formed on the agarose gel, and their distance-dependent changes in spreading velocity was consistent with that in lipid bilayer. Next, the lipid layer was characterized with fluorescence recovery after photo breaching experiment. As a result, it is indicated that lipid molecules in the lipid layer on the agarose showed lateral diffusion, a typical characteristic of lipid bilayer. Taken together, we confirmed that lipid bilayer can be formed on the patterned agarose gel with self-spreading method. The hydrogel-supported bilayer will be a suitable tool for drug discovery.

Electrochemically Triggered Release of Reagent to the Proximal Leaflet of a Microcavity Supported Lipid Bilayer

A novel and versatile approach to electrichemically triggering the release of a reagent, β-cyclodextrin (β-CD), selectively to the proximal leaflet of a supported lipid bilayer is described. Selective delivery is achieved by creating a spanning lipid bilayer across a microcavity array and exploiting the irreversible redox disassembly of the host-guest complex formed between thiolated ferrocene (Fc) and β-cyclodextrin (β-CD) in the presence of chloride. Self-assembled monolayers of the ferrocene-alkanethiols were formed regioselectively on the interior surface of highly ordered 2.8 μm cavities while the exterior top surface of the array was blocked with a monolayer of mercaptoethanol. The Fc monolayers were complexed with β-CD or β-CD-conjugated to streptavidin (β-CD-SA). Phospholipid bilayers were then assembled across the array via combined Langmuir-Blodgett/vesicle fusion leading to a spanning bilayer suspended across the aqueous filled microcavities. Upon application of a positive potential, ferrocene is oxidized to ferrocinium cation, disrupting the inclusion complex and leading to the release of the β-CD into the microcavity solution where it diffuses to the lower leaflet of the suspended bilayer. Disassembly of the supramolecular complex within the cavities and binding of the β-CD-SA to a biotinylated bilayer was followed by voltammetry and impedance spectroscopy where it caused a large increase in membrane resistance. For unmodified β-CD, the extraction of cholesterol from a cholesterol containing bilayer was evident in a decrease in the bilayer resistance. For the first time, this direct approach to targeted delivery of a reagent to the proximal layer of a lipid bilayer offers the potential to build models of bidirectional signaling (inside-out vs outside-in) in cell membrane model systems.

Fast formation of low-defect-density tethered bilayers by fusion of multilamellar vesicles

A facile and reproducible preparation of surface-supported lipid bilayers is essential for fundamental membrane research and biotechnological applications. We demonstrate that multilamellar vesicles fuse to molecular-anchor-grafted surfaces yielding low-defect-density, tethered bilayer membranes. Continuous bilayers are formed within 10min, while the electrically insulating bilayers with <0.1μm^-2 defect density can be accomplished within 60min. Surface plasmon resonance spectroscopy indicates that an amount of lipid material transferred from vesicles to a surface is inversely proportional to the density of an anchor, while the total amount of lipid that includes tethered and transferred lipid remains constant within 5% standard error. This attests for the formation of intact bilayers independent of the tethering agent density. Neutron reflectometry (NR) revealed the atomic level structural details of the tethered bilayer showing, among other things, that the total thickness of the hydrophobic slab of the construct was 3.2nm and that the molar fraction of cholesterol in lipid content is essentially the same as the molar fraction of cholesterol in the multilamellar liposomes. NR also indicated the formation of an overlayer with an effective thickness of 1.9nm. These overlayers may be easily removed by a single rinse of the tethered construct with 30% ethanol solution. Fast assembly and low residual defect density achievable within an hour of fusion makes our tethered bilayer methodology an attractive platform for biosensing of membrane damaging agents, such as pore forming toxins.

DPPTE Thiolipid Self-Assembled Monolayer: A Critical Assay

Supported lipid membranes represent an elegant way to design a fluid interface able to mimic the physicochemical properties of biological membranes, with potential biotechnological applications. In this work, a diacyl phospholipid, the 1,2-dipalmitoyl-sn-glycero-3-phosphothioethanol (DPPTE), functionalized with a thiol group, was immobilized on a gold surface. In this molecule, the thiol group, responsible for the Au-S bond (45 kJ/mol) is located on the phospholipid polar head, letting the hydrophobic chain protrude from the film. This system is widely used in the literature but is no less challenging, since its characterization is not complete, as several discordant data have been obtained. In this work, the film was characterized by cyclic voltammetry blocking experiments, to verify the SAM formation, and by reductive desorption measurements, to estimate the molecular density of DPPTE on the gold surface. This value has been compared to that obtained by quartz crystal microbalance measurements. Ellipsometry and impedance spectroscopy measurements have been performed to obtain information about the monolayer thickness and capacitance. The film morphology was investigated by atomic force microscopy. Finally, Monte Carlo simulations were carried out, in order to gain molecular information about the morphologies of the DPPTE SAM and compare them to the experimental results. We demonstrate that DPPTE molecules, incubated 18 h below the phase transition temperature (T = 41.1 ± 0.4 °C) in ethanol solution, are able to form a self-assembled monolayer on the gold surface, with domain structures of different order, which have never been reported before. Our results make possible rationalization of the scattered results so far obtained on this system, giving a new insight into the formation of phospholipids SAMs on a gold surface.

Electronic control of H+ current in a bioprotonic device with Gramicidin A and Alamethicin

In biological systems, intercellular communication is mediated by membrane proteins and ion channels that regulate traffic of ions and small molecules across cell membranes. A bioelectronic device with ion channels that control ionic flow across a supported lipid bilayer (SLB) should therefore be ideal for interfacing with biological systems. Here, we demonstrate a biotic-abiotic bioprotonic device with Pd contacts that regulates proton (H+) flow across an SLB incorporating the ion channels Gramicidin A (gA) and Alamethicin (ALM). We model the device characteristics using the Goldman-Hodgkin-Katz (GHK) solution to the Nernst-Planck equation for transport across the membrane. We derive the permeability for an SLB integrating gA and ALM and demonstrate pH control as a function of applied voltage and membrane permeability. This work opens the door to integrating more complex H+ channels at the Pd contact interface to produce responsive biotic-abiotic devices with increased functionality.

Generic Role of Polymer Supports in the Fine Adjustment of Interfacial Interactions between Solid Substrates and Model Cell Membranes

To understand the generic role of soft, hydrated biopolymers in adjusting interfacial interactions at biological interfaces, we designed a defined model of the cell-extracellular matrix contacts based on planar lipid membranes deposited on polymer supports (polymer-supported membranes). Highly uniform polymer supports made out of regenerated cellulose allow for the control of film thickness without changing the surface roughness and without osmotic dehydration. The complementary combination of specular neutron reflectivity and high-energy specular X-ray reflectivity yields the equilibrium membrane-substrate distances, which can quantitatively be modeled by computing the interplay of van der Waals interaction, hydration repulsion, and repulsion caused by the thermal undulation of membranes. The obtained results help to understand the role of a biopolymer in the interfacial interactions of cell membranes from a physical point of view and also open a large potential to generally bridge soft, biological matter and hard inorganic materials.

New poly(amino acid methacrylate) brush supports the formation of well-defined lipid membranes

A novel poly(amino acid methacrylate) brush comprising zwitterionic cysteine groups (PCysMA) was utilized as a support for lipid bilayers. The polymer brush provides a 12-nm-thick cushion between the underlying hard support and the aqueous phase. At neutral pH, the zeta potential of the PCysMA brush was ∼-10 mV. Cationic vesicles containing >25% DOTAP were found to form a homogeneous lipid bilayer, as determined by a combination of surface analytical techniques. The lipid mobility as measured by FRAP (fluorescence recovery after photobleaching) gave diffusion coefficients of ∼1.5 μm(2) s(-1), which are comparable to those observed for lipid bilayers on glass substrates.

New poly(amino acid methacrylate) brush supports the formation of well-defined lipid membranes

A novel poly(amino acid methacrylate) brush comprising zwitterionic cysteine groups (PCysMA) was utilized as a support for lipid bilayers. The polymer brush provides a 12-nm-thick cushion between the underlying hard support and the aqueous phase. At neutral pH, the zeta potential of the PCysMA brush was ∼-10 mV. Cationic vesicles containing >25% DOTAP were found to form a homogeneous lipid bilayer, as determined by a combination of surface analytical techniques. The lipid mobility as measured by FRAP (fluorescence recovery after photobleaching) gave diffusion coefficients of ∼1.5 μm(2) s(-1), which are comparable to those observed for lipid bilayers on glass substrates.

High coverage fluid-phase floating lipid bilayers supported by ω-thiolipid self-assembled monolayers

Large area lipid bilayers, on solid surfaces, are useful in physical studies of biological membranes. It is advantageous to minimize the interactions of these bilayers with the substrate and this can be achieved via the formation of a floating supported bilayer (FSB) upon either a surface bound phospholipid bilayer or monolayer. The FSB's independence is enabled by the continuous water layer (greater than 15 Å) that remains between the two. However, previous FSBs have had limited stability and low density. Here, we demonstrate by surface plasmon resonance and neutron reflectivity, the formation of a complete self-assembled monolayer (SAM) on gold surfaces by a synthetic phosphatidylcholine bearing a thiol group at the end of one fatty acyl chain. Furthermore, a very dense FSB (more than 96%) of saturated phosphatidylcholine can be formed on this SAM by sequential Langmuir–Blodgett and Langmuir–Schaefer procedures. Neutron reflectivity used both isotopic and magnetic contrast to enhance the accuracy of the data fits. This system offers the means to study transmembrane proteins, membrane potential effects (using the gold as an electrode) and even model bacterial outer membranes. Using unsaturated phosphatidylcholines, which have previously failed to form stable FSBs, we achieved a coverage of 73%.

Neutron reflectometry from poly (ethylene-glycol) brushes binding anti-PEG antibodies: evidence of ternary adsorption

Neutron reflectometry provides evidence of ternary protein adsorption within polyethylene glycol (PEG) brushes. Anti-PEG Immunoglobulin G antibodies (Abs) binding the methoxy terminated PEG chain segment specifically adsorb onto PEG brushes grafted to lipid monolayers on a solid support. The Abs adsorb at the outer edge of the brush. The thickness and density of the adsorbed Ab layer, as well as its distance from the grafting surface grow with increasing brush density. At high densities most of the protein is excluded from the brush. The results are consistent with an inverted "Y" configuration with the two FAB segments facing the brush. They suggest that increasing the grafting density favors narrowing of the angle between the FAB segments as well as overall orientation of the bound Abs perpendicular to the surface.

Charge-selective membrane protein patterning with proteoliposomes

A novel method to fabricate transmembrane protein (TP) embedded lipid bilayers has been developed, resulting in an immobilized, but biologically functioning TP embedded lipid layer precisely in the targeted patterns.

Biomechanics of cell adhesion: how force regulates the lifetime of adhesive bonds at the single molecule level

Cell adhesion proteins play critical roles in positioning cells during development, segregating cells into distinct tissue compartments and in maintaining tissue integrity. The principle function of these proteins is to bind cells together and resist mechanical force. Adhesive proteins also enable migrating cells to adhere and roll on surfaces even in the presence of shear forces exerted by fluid flow. Recently, several experimental and theoretical studies have provided quantitative insights into the physical mechanisms by which adhesion proteins modulate their unbinding kinetics in response to tensile force. This perspective reviews these biophysical investigations. We focus on single molecule studies of cadherins, selectins, integrins, the von Willebrand factor and FimH adhesion proteins; the effect of mechanical force on the lifetime of these interactions has been extensively characterized. We review both theoretical models and experimental investigations and discuss future directions in this exciting area of research.

Conditions for liposome adsorption and bilayer formation on BSA passivated solid supports

Planar solid supported lipid membranes that include an intervening bovine serum albumen (BSA) cushion can greatly reduce undesirable interactions between reconstituted membrane proteins and the underlying substrate. These hetero-self-assemblies reduce frictional coupling by shielding reconstituted membrane proteins from the strong surface charge of the underlying substrate, thereby preventing them from strongly sticking to the substrate themselves. The motivation for this work is to describe the conditions necessary for liposome adsorption and bilayer formation on these hetero-self-assemblies. Described here are experiments that show that the state of BSA is critically important to whether a lipid bilayer is formed or intact liposomes are adsorbed to the BSA passivated surface. It is shown that a smooth layer of native BSA will readily promote lipid bilayer formation while BSA that has been denatured either chemically or by heat will not. Atomic force microscopy (AFM) and fluorescence microscopy was used to characterize the surfaces of native, heat denatured, and chemically reduced BSA. The mobility of several zwitterionic and negatively charged lipid combinations has been measured using fluorescence recovery after photobleaching (FRAP). From these measurements diffusion constants and percent recoveries have been determined and tabulated. The effect of high concentrations of beta-mercaptoethanol (β-ME) on liposome formation as well as bilayer formation was also explored.

Vibrational spectroscopy for probing molecular-level interactions in organic films mimicking biointerfaces

Investigation into nanostructured organic films has served many purposes, including the design of functionalized surfaces that may be applied in biomedical devices and tissue engineering and for studying physiological processes depending on the interaction with cell membranes. Of particular relevance are Langmuir monolayers, Langmuir-Blodgett (LB) and layer-by-layer (LbL) films used to simulate biological interfaces. In this review, we shall focus on the use of vibrational spectroscopy methods to probe molecular-level interactions at biomimetic interfaces, with special emphasis on three surface-specific techniques, namely sum frequency generation (SFG), polarization-modulated infrared reflection absorption spectroscopy (PM-IRRAS) and surface-enhanced Raman scattering (SERS). The two types of systems selected for exemplifying the potential of the methods are the cell membrane models and the functionalized surfaces with biomolecules. Examples will be given on how SFG and PM-IRRAS can be combined to determine the effects from biomolecules on cell membrane models, which include determination of the orientation and preservation of secondary structure. Crucial information for the action of biomolecules on model membranes has also been obtained with PM-IRRAS, as is the case of chitosan removing proteins from the membrane. SERS will be shown as promising for enabling detection limits down to the single-molecule level. The strengths and limitations of these methods will also be discussed, in addition to the prospects for the near future.

High Contrast Visualization of Cell-Hydrogel Contact by Advanced Interferometric Optical Microscopy

Hydrogels with tunable elasticity has been widely used as micromechanical environment models for cells. However, the imaging of physical contacts between cells and hydrogels with a nanometer resolution along the optical axis remain challenging because of low reflectivity at hydrogel-liquid interface. In this work, we have developed an advanced interferometric optical microscopy for the high contrast visualization of cell-hydrogel contact. Here, reflection interference contrast microscopy (RICM) was modified with a confocal unit, high throughput optics and coherent monochromatic light sources to enhance interferometric signals from cell-hydrogel contact zones. The advanced interferomety clearly visualized physical contacts between cells and hydrogels, and thus enabled the quantitative evaluation of the area of cell-hydrogel adhesion.

Validity and applicability of membrane model systems for studying interactions of peripheral membrane proteins with lipids

The cell membrane serves, at the same time, both as a barrier that segregates as well as a functional layer that facilitates selective communication. It is characterized as much by the complexity of its components as by the myriad of signaling process that it supports. And, herein lays the problems in its study and understanding of its behavior - it has a complex and dynamic nature that is further entangled by the fact that many events are both temporal and transient in their nature. Model membrane systems that bypass cellular complexity and compositional diversity have tremendously accelerated our understanding of the mechanisms and biological consequences of lipid-lipid and protein-lipid interactions. Concurrently, in some cases, the validity and applicability of model membrane systems are tarnished by inherent methodical limitations as well as undefined quality criteria. In this review we introduce membrane model systems widely used to study protein-lipid interactions in the context of key parameters of the membrane that govern lipid availability for peripheral membrane proteins. This article is part of a Special Issue entitled Tools to study lipid functions.

Iterative layer-by-layer assembly of polymer-tethered multi-bilayers using maleimide–thiol coupling chemistry

The current study reports on the layer-by-layer assembly of a polymer-tethered lipid multi-bilayer stack using the iterative addition and roll out of giant unilamellar vesicles (GUVs) containing constituents with thiol and maleimide functional groups, respectively. Confocal microscopy and photobleaching experiments confirm stack integrity and stability over time, as well as the lateral fluidity of individual bilayers within the stacks. Complementary wide-field single molecule fluorescence microscopy and atomic force microscopy experiments show that increasing bilayer-substrate distances are associated with changes in lipid lateral mobility and bilayer morphology. Importantly, the described iterative approach can be employed to assemble multi-bilayer stacks with more than two bilayers, thus further reducing the influence of the underlying solid substrate on membrane behavior. Furthermore, the presence of lipopolymers within the multi-bilayer stacks results in fascinating membrane dynamics and organization properties, with interesting parallels to those found in plasma membranes. In that sense, the described multi-bilayer architecture represents an attractive model membrane platform for a variety of different biophysical studies.