The M2 channel of influenza A virus: a molecular dynamics study

A comparative study of influenza A M2 protein conformations in DOPC/DOPS liposomes and in native E. coli membranes

We compared the conformations of the transmembrane domain (TMD) of influenza A M2 (IAM2) protein reconstituted at pH 7.4 in DOPC/DOPS bilayers to those in isolated E. coli membranes, having preserved its native proteins and lipids. IAM2 is a single-pass transmembrane protein known to assemble into homo-tetrameric proton channel. To represent this channel, we made a construct containing the IAM2's TMD region flanked by the juxtamembrane residues. The single cysteine substitute, L43C, of leucine located in the bilayer polar region was paramagnetically tagged with a methanethiosulfonate nitroxide label for the ESR (electron spin resonance) study. We compared the conformations of the spin-labeled IAM2 residing in DOPC/DOPS and native E. coli membranes using continuous-wave (CW) ESR and double electron-electron resonance (DEER) spectroscopy. The total protein-to-lipid molar ratio spanned the range from 1:230 to 1:10,400⩦ The CW ESR spectra corresponded to a nearly rigid limit spin label dynamics in both environments. In all cases, the DEER data were reconstructed into the distance distributions showing well-resolved peaks at 1.68 nm and 2.37 nm. The peak distance ratio was 1.41±0.2 and the amplitude ratio was 2:1. This is what one expects from four nitroxide spin-labels located at the corners of a square, indicative of an axially symmetric tetramer. Distance modeling of DEER data with molecular modeling software applied to the NMR molecular structures (PDB: 2L0J) confirmed the symmetry and closed state of the C-terminal exit pore of the IAM2 tetramer in agreement with the NMR model. Thus, we can conclude that IAM2 TMD has similar conformations in model and native E. coli membranes of comparable thickness and fluidity, notwithstanding the complexity of the E. coli membranes caused by their lipid diversity and the abundance of integral and peripheral membrane proteins.

Influenza Viruses: Harnessing the Crucial Role of the M2 Ion-Channel and Neuraminidase toward Inhibitor Design

As a member of the Orthomyxoviridae family of viruses, influenza viruses (IVs) are known causative agents of respiratory infection in vertebrates. They remain a major global threat responsible for the most virulent diseases and global pandemics in humans. The virulence of IVs and the consequential high morbidity and mortality of IV infections are primarily attributed to the high mutation rates in the IVs' genome coupled with the numerous genomic segments, which give rise to antiviral resistant and vaccine evading strains. Current therapeutic options include vaccines and small molecule inhibitors, which therapeutically target various catalytic processes in IVs. However, the periodic emergence of new IV strains necessitates the continuous development of novel anti-influenza therapeutic options. The crux of this review highlights the recent studies on the biology of influenza viruses, focusing on the structure, function, and mechanism of action of the M2 channel and neuraminidase as therapeutic targets. We further provide an update on the development of new M2 channel and neuraminidase inhibitors as an alternative to existing anti-influenza therapy. We conclude by highlighting therapeutic strategies that could be explored further towards the design of novel anti-influenza inhibitors with the ability to inhibit resistant strains.

Capturing Biologically Complex Tissue-Specific Membranes at Different Levels of Compositional Complexity

Plasma membranes (PMs) contain hundreds of different lipid species that contribute differently to overall bilayer properties. By modulation of these properties, membrane protein function can be affected. Furthermore, inhomogeneous lipid mixing and domains of lipid enrichment/depletion can sort proteins and provide optimal local environments. Recent coarse-grained (CG) Martini molecular dynamics efforts have provided glimpses into lipid organization of different PMs: an “Average” and a “Brain” PM. Their high complexity and large size require long simulations (∼80 μs) for proper sampling. Thus, these simulations are computationally taxing. This level of complexity is beyond the possibilities of all-atom simulations, raising the question—what complexity is needed for “realistic” bilayer properties? We constructed CG Martini PM models of varying complexity (63 down to 8 different lipids). Lipid tail saturations and headgroup combinations were kept as consistent as possible for the “tissues’” (Average/Brain) at three levels of compositional complexity. For each system, we analyzed membrane properties to evaluate which features can be retained at lower complexity and validate eight-component bilayers that can act as reliable mimetics for Average or Brain PMs. Systems of reduced complexity deliver a more robust and malleable tool for computational membrane studies and allow for equivalent all-atom simulations and experiments.

Influenza A Virus M2 Protein: Roles from Ingress to Egress

Influenza A virus (IAV) matrix protein 2 (M2) is among the smallest bona fide, hence extensively studied, ion channel proteins. The M2 ion channel activity is not only essential for virus replication, but also involved in modulation of cellular homeostasis in a variety of ways. It is also the target for ion channel inhibitors, i.e., anti-influenza drugs. Thus far, several studies have been conducted to elucidate its biophysical characteristics, structure-function relationships of the ion channel, and the M2-host interactome. In this review, we discuss M2 protein synthesis and assembly into an ion channel, its roles in IAV replication, and the pathophysiological impact on the host cell.

Decoupled side chain and backbone dynamics for proton translocation - M2 of influenza A

The 97 amino acid bitopic membrane protein M2 of influenza A forms a tetrameric bundle in which two of the monomers are covalently linked via a cysteine bridge. In its tetrameric assembly the protein conducts protons across the viral envelope and within intracellular compartments during the infectivity cycle of the virus. A key residue in the translocation of the protons is His-37 which forms a planar tetrad in the configuration of the bundle accepting and translocating the incoming protons from the N terminal side, exterior of the virus, to the C terminal side, inside the virus. With experimentally available data from NMR spectroscopy of the transmembrane domains of the tetrameric M2 bundle classical MD simulations are conducted with the protein bundle in different protonation stages in respect to His-37. A full correlation analysis (FCA) of the data sets with the His-37 tetrad either in a fully four times unprotonated or protonated state, assumed to mimic high and low pH in vivo, respectively, in both cases reveal asymmetric backbone dynamics. His-37 side chain rotation dynamics is increased at full protonation of the tetrad compared to the dynamics in the fully unprotonated state. The data suggest that proton translocation can be achieved by decoupled side chain or backbone dynamics. Graphical abstract Visualization of the tetrameric bundle of the transmembrane domains of M2 of influenza A after 200 ns of MD simulations (upper left). The four histidine residues 37 are either not protonated as in M2⁰ or fully protonated is in M2⁴⁺. The asymmetric dynamics of the backbones are shown after a full correlation analysis (FCA) in blue (lower left). The rotational dynamics of the χ2 dihedral angles of the histidines in M2⁰ (upper right) are less than those in M2⁴⁺ (lower right).

Viral channel forming proteins--How to assemble and depolarize lipid membranes in silico

Viral channel forming proteins (VCPs) have been discovered in the late 70s and are found in many viruses to date. Usually they are small and have to assemble to form channels which depolarize the lipid membrane of the host cells. Structural information is just about to emerge for just some of them. Thus, computational methods play a pivotal role in generating plausible structures which can be used in the drug development process. In this review the accumulation of structural data is introduced from a historical perspective. Computational performances and their predictive power are reported guided by biological questions such as the assembly, mechanism of function and drug–protein interaction of VCPs. An outlook of how coarse grained simulations can contribute to yet unexplored issues of these proteins is given. This article is part of a Special Issue entitled: Membrane Proteins edited by J.C. Gumbart and Sergei Noskov.

•

Early references about the discovery of viral channel forming proteins.

•

Latest structural information about the class of proteins.

•

Identification of structural motifs, assembly mechanism of function and drug action using computational methods.

•

Outlook for the use of coarse grained techniques to address assembly and integration into cellular processes.

Assembly of encapsulated water in hybrid bisamides: helical and zigzag water chains

The addition of water promotes the self-assembly of hybrid bisamides by bridging between the molecules and stabilizes the helical or zigzag one-dimensional water chains.

Electric Field Effect on Phospholipid Monolayers at an Aqueous-Organic Liquid-Liquid Interface

The electric potential difference across cell membranes, known as the membrane potential, plays an important role in the activation of many biological processes. To investigate the effect of the membrane potential on the molecular ordering of lipids within a biomimetic membrane, a self-assembled monolayer of 1-stearoyl-2-oleoyl-sn-glycero-3-phosphocholine (SOPC) lipids at an electrified 1,2-dichloroethane/water interface is studied with X-ray reflectivity and interfacial tension. Measurements over a range of electric potential differences, -150 to +130 mV, that encompass the range of typical biomembrane potentials demonstrate a nearly constant and stable structure whose lipid interfacial density is comparable to that found in other biomimetic membrane systems. Measurements at higher positive potentials, up to 330 mV, illustrate a monotonic decrease in the lipid interfacial density and accompanying variations in the interfacial configuration of the lipid. Molecular dynamics simulations, designed to mimic the experimental conditions, show that the measured changes in lipid configuration are due primarily to the variation in area per lipid with increasing applied electric field. Rotation of the SOPC dipole moment by the torque from the applied electric field appears to be negligible, except at the highest measured potentials. The simulations confirm in atomistic detail the measured potential-dependent characteristics of SOPC monolayers. Our hybrid study sheds light on phospholipid monolayer stability under different membrane potentials, which is important for understanding membrane processes. This study also illustrates the use of X-ray surface scattering to probe the ordering of surfactant monolayers at an electrified aqueous-organic liquid-liquid interface.

Mechanism of function of viral channel proteins and implications for drug development

Viral channel-forming proteins comprise a class of viral proteins which, similar to their host companions, are made to alter electrochemical or substrate gradients across lipid membranes. These proteins are active during all stages of the cellular life cycle of viruses. An increasing number of proteins are identified as channel proteins, but the precise role in the viral life cycle is yet unknown for the majority of them. This review presents an overview about these proteins with an emphasis on those with available structural information. A concept is introduced which aligns the transmembrane domains of viral channel proteins with those of host channels and toxins to give insights into the mechanism of function of the viral proteins from potential sequence identities. A summary of to date investigations on drugs targeting these proteins is given and discussed in respect of their mode of action in vivo.

Constant electric field simulations of the membrane potential illustrated with simple systems

Advances in modern computational methods and technology make it possible to carry out extensive molecular dynamics simulations of complex membrane proteins based on detailed atomic models. The ultimate goal of such detailed simulations is to produce trajectories in which the behavior of the system is as realistic as possible. A critical aspect that requires consideration in the case of biological membrane systems is the existence of a net electric potential difference across the membrane. For meaningful computations, it is important to have well validated methodologies for incorporating the latter in molecular dynamics simulations. A widely used treatment of the membrane potential in molecular dynamics consists of applying an external uniform electric field E perpendicular to the membrane. The field acts on all charged particles throughout the simulated system, and the resulting applied membrane potential V is equal to the applied electric field times the length of the periodic cell in the direction perpendicular to the membrane. A series of test simulations based on simple membrane-slab models are carried out to clarify the consequences of the applied field. These illustrative tests demonstrate that the constant-field method is a simple and valid approach for accounting for the membrane potential in molecular dynamics studies of biomolecular systems. This article is part of a Special Issue entitled: Membrane protein structure and function.

Coarse-grained molecular dynamics of tetrameric transmembrane peptide bundles within a lipid bilayer

The conformations of model transmembrane peptides are studied to understand the structural and dynamical aspects of tetrameric bundles using a series of coarse grain (CG) molecular dynamics (MD) simulations since membrane proteins play a crucial role in cell function. In this work, two different amphipathic models have been constructed using similar hydrophobic/hydrophilic characteristics with two structurally distinct morphologies to evaluate the effect of roughness and hydrophilic topology on the structure of tetrameric bundles, one class that forms an ion-channel and one class that does not. Free energy calculations of typical amphipathic peptide topologies show that using a relatively smooth surface morphology allows for a stable conformation of the tetramer bundle in a diamond formation. However, the model with side chains attached to the core in order to roughen the surface has a stable square tetramer bundle which is consistent with experimental data and all-atom (AA) MD simulations. Comparisons of the CG simulations with AA MD simulations are in reasonable agreement with the formation of tetrameric homo-oligomers, partitioning within the lipid bilayer and tilt angle with respect to the bilayer normal. We concluded that a square or diamond shape tetrameric homo-oligomers could be stabilized by rational design of the peptide morphology and topology of the surface, thus allowing us to tune the permeability of the bundle or channel.

Free-energy profiles for ions in the influenza M2-TMD channel

M(2) transmembrane domain channel (M(2)-TMD) permeation properties are studied using molecular dynamics simulations of M(2)-TMD (1NYJ) embedded in a lipid bilayer (DMPC) with 1 mol/kg NaCl or KCl saline solution. This study allows examination of spontaneous cation and anion entry into the selectivity filter. Three titration states of the M(2)-TMD tetramer are modeled for which the four His(37) residues, forming the selectivity filter, are net uncharged, +2 charged, or +3 charged. M(2)-TMD structural properties from our simulations are compared with the properties of other models extracted from NMR and X-ray studies. During 10 ns simulations, chloride ions occasionally occupy the positively-charged selectivity filter region, and from umbrella sampling simulations, Cl(-) has a lower free-energy barrier in the selectivity-filter region than either Na(+) or NH(4) (+), and NH(4) (+) has a lower free-energy barrier than Na(+). For Na(+) and Cl(-), the free-energy barriers are less than 5 kcal/mol, suggesting that the 1NYJ conformation would probably not be exquisitely proton selective. We also point out a rotameric configuration of Trp(41) that could fully occlude the channel.

Determination, prediction, and understanding of structures, using the energy landscapes of chemical systems – Part II

In the past decade, new theoretical approaches have been developed to determine, predict and understand the struc-ture of chemical compounds. The central element of these methods has been the investigation of the energy landscape of chemical systems. Applications range from extended crystalline and amorphous compounds over clusters and molecular crystals to proteins. In this review, we are going to give an introduction to energy landscapes and methods for their investigation, together with a number of examples. These include structure prediction of extended and mo-lecular crystals, structure prediction and folding of proteins, structure analysis of zeolites, and structure determination of crystals from powder diffraction data.

Molecular dynamics guided study of salt bridge length dependence in both fluorinated and non-fluorinated parallel dimeric coiled-coils

The alpha-helical coiled-coil is one of the most common oligomerization motifs found in both native and engineered proteins. To better understand the stability and dynamics of the coiled-coil motifs, including those modified by fluorination, several fluorinated and nonfluorinated parallel dimeric coiled-coil protein structures were designed and modeled. We also attempt to investigate how changing the length and geometry of the important stabilizing salt bridges influences the coiled-coil protein structure. Molecular dynamics (MD) and free energy simulations with AMBER used a particle mesh Ewald treatment of the electrostatics in explicit TIP3P solvent with balanced force field treatments. Preliminary studies with legacy force fields (ff94, ff96, and ff99) show a profound instability of the coiled-coil structures in short MD simulation. Significantly, better behavior is evident with the more balanced ff99SB and ff03 protein force fields. Overall, the results suggest that the coiled-coil structures can readily accommodate the larger acidic arginine or S-2,7-diaminoheptanedoic acid mutants in the salt bridge, whereas substitution of the smaller L-ornithine residue leads to rapid disruption of the coiled-coil structure on the MD simulation time scale. This structural distortion of the secondary structure allows both the formation of large hydration pockets proximal to the charged groups and within the hydrophobic core. Moreover, the increased structural fluctuations and movement lead to a decrease in the water occupancy lifetimes in the hydration pockets. In contrast, analysis of the hydration in the stable dimeric coiled-coils shows high occupancy water sites along the backbone residues with no water occupancy in the hydrophobic core, although transitory water interactions with the salt bridge residues are evident. The simulations of the fluorinated coiled-coils suggest that in some cases fluorination electrostatically stabilizes the intermolecular coiled-coil salt bridges. Structural analyses also reveal different side chain rotamer preferences for leucine when compared with 5,5,5,5',5',5'-hexafluoroleucine mutants. These observed differences in the side chain rotamer populations suggest differential changes in the side chain conformational entropy upon coiled-coil formation when the protein is fluorinated. The free energy of hydration of the isolated 5,5,5,5',5',5'-hexafluoroleucine amino acid is calculated to be 1.1 kcal/mol less stable than leucine; this hydrophobic penalty in the monomer may provide a driving force for coiled-coil dimer formation. Estimation of the ellipticity at 222 nm from a series of snapshots from the MD simulations with DicroCalc shows distinct increases in the ellipticity when the coiled-coil is fluorinated, which suggests that the helicity in the folded coiled-coils is greater when fluorinated.

Molecular dynamics calculations suggest a conduction mechanism for the M2 proton channel from influenza A virus

The M2 protein of the influenza A virus is activated by low endosomal pH and performs the essential function of proton transfer into the viral interior. The resulting decrease in pH within the virion is essential for the uncoating and further replication of the viral genetic material. The x-ray crystal [Stouffer AL, et al. (2008) Nature 451:596-599] and solution NMR [Schnell JR, Chou JJ (2008) Nature 451:591-595] structures of the transmembrane region of the M2 homo-tetrameric bundle both revealed pores with narrow constrictions at one end, leaving a question as to how protons enter the channel. His-37, which is essential for proton-gating and selective conduction of protons, lies in the pore of the crystallographic and NMR structures. Here, we explore the different protonation states of the His-37 residues of the M2 bundle in a bilayer using molecular dynamics (MD) simulations. When the His-37 residues are neutral, the protein prefers an Open(out)-Closed(in) conformation in which the channel is open to the environment on the outside of the virus but closed to the interior environment of the virus. Diffusion of protons into the channel from the outside of the virus and protonation of His-37 residues in the tetramer stabilizes an oppositely gated Closed(out)-Open(in) conformation. Thus, protons might be conducted through a transporter-like mechanism, in which the protein alternates between Open(out)-Closed(in) and Closed(out)-Open(in) conformations, and His-37 is protonated/deprotonated during each turnover. The transporter-like mechanism is consistent with the known properties of the M2 bundle, including its relatively low rate of proton flux and its strong rectifying behavior.

Exploring the conformational space of Vpu from HIV-1: a versatile adaptable protein

The dynamic behavior of monomeric Vpu(1-32) from HIV-1 in different lipid environments has been studied. The peptide shows highly flexible behavior during the simulations and easily adapts to changing lipid environments as it experiences when travelling through the Golgi apparatus. Protein-lipid interactions do not show any significant correlation towards lipid type or thickness based on multiple 10 ns simulations. The averaged structure of a series of 16 independent simulations suggest kink around Ser-24, which compensates the polarity of its side chain by forming hydrogen bonds with the carbonyl backbone of adjacent amino acids towards the N-terminus.

Free-energy profiles of membrane insertion of the M2 transmembrane peptide from influenza A virus

The insertion of the M2 transmembrane peptide from influenza A virus into a membrane has been studied with molecular-dynamics simulations. This system is modeled by an atomically detailed peptide interacting with a continuum representation of a membrane bilayer in aqueous solution. We performed replica-exchange molecular-dynamics simulations with umbrella-sampling techniques to characterize the probability distribution and conformation preference of the peptide in the solution, at the membrane interface, and in the membrane. The minimum in the calculated free-energy surface of peptide insertion corresponds to a fully inserted, helical peptide spanning the membrane. The free-energy profile also shows that there is a significant barrier for the peptide to enter into this minimum in a nonhelical conformation. The sequence of the peptide is such that hydrophilic amino acid residues at the ends of the otherwise primarily hydrophobic peptide create a trapped, U-shaped conformation with the hydrophilic residues associated with the aqueous phase and the hydrophobic residues embedded in the membrane. Analysis of the free energy shows that the barrier to insertion is largely enthalpic in nature, whereas the membrane-spanning global minimum is favored by entropy.

Self-assembly of a simple membrane protein: coarse-grained molecular dynamics simulations of the influenza M2 channel

The transmembrane (TM) domain of the M2 channel protein from influenza A is a homotetrameric bundle of alpha-helices and provides a model system for computational approaches to self-assembly of membrane proteins. Coarse-grained molecular dynamics (CG-MD) simulations have been used to explore partitioning into a membrane of M2 TM helices during bilayer self-assembly from lipids. CG-MD is also used to explore tetramerization of preinserted M2 TM helices. The M2 helix monomer adopts a membrane spanning orientation in a lipid (DPPC) bilayer. Multiple extended CG-MD simulations (5 x 5 micros) were used to study the tetramerization of inserted M2 helices. The resultant tetramers were evaluated in terms of the most populated conformations and the dynamics of their interconversion. This analysis reveals that the M2 tetramer has 2x rotationally symmetrical packing of the helices. The helices form a left-handed bundle, with a helix tilt angle of approximately 16 degrees. The M2 helix bundle generated by CG-MD was converted to an atomistic model. Simulations of this model reveal that the bundle's stability depends on the assumed protonation state of the H37 side chains. These simulations alongside comparison with recent x-ray (3BKD) and NMR (2RLF) structures of the M2 bundle suggest that the model yielded by CG-MD may correspond to a closed state of the channel.

Application of solid-state NMR restraint potentials in membrane protein modeling

We have developed a set of orientational restraint potentials for solid-state NMR observables including (15)N chemical shift and (15)N-(1)H dipolar coupling. Torsion angle molecular dynamics simulations with available experimental (15)N chemical shift and (15)N-(1)H dipolar coupling as target values have been performed to determine orientational information of four membrane proteins and to model the structures of some of these systems in oligomer states. The results suggest that incorporation of the orientational restraint potentials into molecular dynamics provides an efficient means to the determination of structures that optimally satisfy the experimental observables without an extensive geometrical search.

A secondary gate as a mechanism for inhibition of the M2 proton channel by amantadine

The mechanism of inhibition of the influenza A virus M2 proton channel by the antiviral drug amantadine has been under intense investigation. The importance of a mechanistic understanding is heightened by the prevalence of amantadine-resistant mutations. To gain mechanistic insight at the molecular level, we carried out extensive molecular dynamics simulations of the tetrameric M2 proton channel in both apo and amantadine-bound forms in a lipid bilayer. The simulation of the apo form revealed that Val27 from the four M2 subunits can form a secondary gate near the channel entrance and break the water wire in the channel pore. This gate arises from physical occlusion and the elimination of hydrogen-bonding partners for water molecules. In the presence of amantadine, the secondary gate formed by Val27 and the drug molecule lying just below form an extended blockage, which breaks the water wire throughout the simulation. The location and orientation of amantadine inside of the channel pore as found in our simulation are supported by a host of experimental observations. Our study suggests a novel role for Val27 in the inhibition of the M2 proton channel by amantadine.

19F NMR detection of the complex between amantadine and the receptor portion of the influenza A M2 ion channel in DPC micelles

(19)F NMR probes were used to follow interactions between ligands in the aminoadamantane series, amantadine (Am) 1 and 3-F-Am 2, and the 5-F-Trp20 transmembrane fragment of the influenza A M2 proton channel (F-M2TM 3) in dodecylphosphocholine micelles over the pH range 5-8. Above pH 7, when the peptide adopts a tetrameric state that is able to bind channel blocking ligands, (19)F-Trp signals from both the free and bound states of the M2TM tetramer are resolved. This differentiation of bound and unbound states of the M2TM receptor by (19)F NMR may provide a system for SAR studies.

Exploration on Regulating Factors for Proton Transfer along Hydrogen-Bonded Water Chains

Proton transfer along a single-file hydrogen-bonded water chain is elucidated with a special emphasis on the investigation of chain length, side water, and solvent effects, as well as the temperature and pressure dependences. The number of water molecules in the chain varies from one to nine. The proton can be transported to the acceptor fragment through the single-file hydrogen-bonded water wire which contains at most five water molecules. If the number of water molecule is more than five, the proton is trapped by the chain in the hydroxyl-centered H(7)O(3) (+) state. The farthest water molecule involved in the formation of H(7)O(3) (+) is the fifth one away from the donor fragment. These phenomena reappear in the molecular dynamics simulations. The energy of the system is reduced along with the proton conduction. The proton transfer mechanism can be altered by excess proton. The augmentation of the solvent dielectric constant weakens the stability of the system, but favors the proton transfer. NMR spin-spin coupling constants can be used as a criterion in judging whether the proton is transferred or not. The enhancement of temperature increases the thermal motion of the molecule, augments the internal energy of the system, and favors the proton transfer. The lengthening of the water wire increases the entropy of the system, concomitantly, the temperature dependence of the Gibbs free energy increases. The most favorable condition for the proton transfer along the H-bonded water wire is the four-water contained chain with side water attached near to the acceptor fragment in polar solvent under higher temperature.

Determining the orientation of uniaxially rotating membrane proteins using unoriented samples: a 2H, 13C, AND 15N solid-state NMR investigation of the dynamics and orientation of a transmembrane helical bundle

Membrane protein orientation has traditionally been determined by NMR using mechanically or magnetically aligned samples. Here we show a new NMR approach that abolishes the need for preparing macroscopically aligned membranes. When the protein undergoes fast uniaxial rotation around the bilayer normal, the 0 degrees -frequency of the motionally averaged powder spectrum is identical to the frequency of the aligned protein whose alignment axis is along the magnetic field. Thus, one can use unoriented membranes to determine the orientation of the protein relative to the bilayer normal. We demonstrate this approach on the M2 transmembrane peptide (M2TMP) of influenza A virus, which is known to assemble into a proton-conducting tetrameric helical bundle. The fast uniaxial rotational diffusion of the M2TMP helical bundle around the membrane normal is characterized via 2H quadrupolar couplings, C-H and N-H dipolar couplings, 13C chemical shift anisotropies, and 1H T1rho relaxation times. We then show that 15N chemical shift anisotropy and N-H dipolar coupling measured on these powder samples can be analyzed to yield precise tilt angles and rotation angles of the helices. The data show that the tilt angle of the M2TMP helices depends on the membrane thickness to reduce the hydrophobic mismatch. Moreover, the orientation of a longer M2 peptide containing both the transmembrane domain and cytoplasmic residues is similar to the orientation of the transmembrane domain alone, suggesting that the transmembrane domain regulates the orientation of this protein and that structural information obtained from M2TMP may be extrapolated to the longer peptide. This powder-NMR approach for orientation determination is generally applicable and can be extended to larger membrane proteins.

Targeting HIV-1 Through Molecular Modeling and Docking Studies of CXCR4: Leads for Therapeutic Development

The chemokine receptor CXCR4 is the receptor for several chemokines and major co-receptor for X4 human immunodeficiency virus type-1 strains entry into cell. A three-dimensional model of human CXCR4 was developed by homology modeling using the high-resolution bovine rhodopsin structure as template. Interactions between CXCR4 and flavonoids were investigated using in silico docking studies. The results underscore the potential of these compounds that they may become important new antiviral drugs to combat AIDS. It is worth mentioning also that apart from these existing flavonoids, there are many new compounds that may also be useful as topical agents to inactivate virus, or may act as adjuvants with other antiviral drugs.

Multiscale simulation of transmembrane proteins

Multiscale simulation is employed to examine changes in atomistic-level protein structure due to long wavelength membrane undulations and plane stress fields. An ensemble of atomistic-level simulations of a model of a transmembrane influenza A virus M2 proton channel in a dimyristoylphosphatidylcholine (DMPC) bilayer is coupled to a corresponding mesoscopic model of a DMPC bilayer in an explicit mesoscopic solvent. Structural variations in the key proton gating His37 residues of the M2 channel are examined. Small, but distinct variations in the structure of the His37 residues are observed in both the open and closed states of the channel as a result of the coupling to mesoscopic-level membrane motions.

How pH opens a H+ channel: the gating mechanism of influenza A M2

The tetrameric M2 protein from influenza A is one of the simplest pH-gated H+ channels known, offering the potential of structurally characterizing its gating mechanism. Since the only ionizable groups in the pore are four histidines, we investigated the stability and dynamics of all six possible protonation states of the protein by using molecular dynamics. We show that while all channel protonation states are surprisingly stable, only systems with two or more charged histidines are appreciably conductive. The structural switch, from a uniprotonated to a biprotonated channel, causes an electrostatic repulsion between the charged histidines that pushes the helices apart. This results in the formation of a continuous water file that conducts protons via a H+ wire. pKa calculations place this transition at a pH of 5.6, in remarkable agreement with the experimental value. Since the conversion from uniprotonation to biprotonation occurs during endosome acidification, this explains how M2 is activated in vivo.

Sulfate anion helices formed by the assistance of a flip-flop water chain

A flip-flop extended water structure assists the formation of sulfate anion helices (both left- and right-handed) in a crystalline hydrate of a simple organic-inorganic compound [C6H10N2]SO4. 1.5H2O (1).

A homology model of the pore region of HCN channels

HCN channels are activated by membrane hyperpolarization and regulated by cyclic nucleotides, such as cyclic adenosine-mono-phosphate (cAMP). Here we present structural models of the pore region of these channels obtained by using homology modeling and validated against spatial constraints derived from electrophysiological experiments. For the construction of the models we make two major assumptions, justified by electrophysiological observations: i), in the closed state, the topology of the inner pore of HCN channels is similar to that of K(+) channels. In particular, the orientation of the S5 and S6 helices of HCN channels is very similar to that of the corresponding helices of the K(+) KcsA and K(+) KirBac1.1 channels. Thus, we use as templates the x-ray structure of these K(+) channels. ii), In the open state, the S6 helix is bent further than it is in the closed state, as suggested (but not proven) by experimental data. For this reason, the template of the open conformation is the x-ray structure of the MthK channel. The structural models of the closed state turn out to be consistent with all the available electrophysiological data. The model of the open state turned out to be consistent with all the available electrophysiological data in the filter region, including additional experimental data performed in this work. However, it required the introduction of an appropriate, experimentally derived constraint for the S6 helix. Our modeling provides a structural framework for understanding several functional properties of HCN channels: i), the cysteine ring at the inner mouth of the pore may act as a sensor of the intracellular oxidizing/reducing conditions; ii), the bending amplitude of the S6 helix upon gating appears to be significantly smaller than that found in MthK channels; iii), the reduced ionic selectivity of HCN channels, relative to that of K(+) channels, may be caused, at least in part, by the larger flexibility of the inner pore of HCN channels.

Proton conductance of influenza virus M2 protein in planar lipid bilayers

Purified M2 protein from the Udorn strain of influenza virus was reconstituted into planar lipid bilayers from liposomes. In 1 mM HCl, the single-channel conductance was measured as 6 pS with open probability of < or =0.03. The current voltage curve is linear over the achievable voltage range. The current amplitude is amantadine sensitive. In HCl solutions, the single-channel current was essentially invariant with changes in [Cl(-)], [Na(+)], and [tetraethylammonium] ([TEA(+)]), but dependent on [H(+)]. The reversal potential, determined with asymmetrical hydrogen chloride solution, is very close to the equilibrium potential of hydrogen. This appears to be the first report of single-channel proton currents with the full-length M2 protein.

The origin and early evolution of membrane channels

The origin and early evolution of ion channels are considered from the point of view that the transmembrane segments of membrane proteins are structurally quite simple and do not require specific sequences to fold. We argue that the transport of solute species, especially ions, required an early evolution of efficient transport mechanisms, and that the emergence of simple ion channels was protobiologically plausible. We also argue that, despite their simple structure, such channels could possess properties that, at the first sight, appear to require markedly greater complexity. These properties can be subtly modulated by local modifications to the sequence rather than global changes in molecular architecture. In order to address the evolution and development of ion channels, we focus on identifying those protein domains that are commonly associated with ion channel proteins and are conserved throughout the three main domains of life (Eukarya, Bacteria, and Archaea). We discuss the potassium-sodium-calcium superfamily of voltage-gated ion channels, mechanosensitive channels, porins, and ABC-transporters and argue that these families of membrane channels have sufficiently universal architectures that they can readily adapt to the diverse functional demands arising during evolution.

Proton conduction through the M2 protein of the influenza A virus; a quantitative, mechanistic analysis of experimental data

The M2 proton channel from influenza A virus forms proton-selective ion channels, which are the target of the drug amantadine. Here, existing experimental data are quantitatively examined for insights into mechanisms to account for the pH- and voltage-dependences of M2 proton conduction. The analysis shows that a model involving protonation equilibria of His37, including pH-dependent changes in the relative rates of diffusion on either side of the pore, is quantitatively able to account for recently reported electrophysiological data examining the pH- and voltage-dependences of Rostock and Weybridge strain M2 proton conduction.

Computational studies of proton transport through the M2 channel

The M2 ion channel is an essential component of the influenza A virus. This low-pH gated channel has a high selectivity for protons. Evidence from various experimental data has indicated that the essential structure responsible for the channel is a parallel homo-tetrameric alpha-helix bundle having a left-handed twist with each helix tilted with respect to the membrane normal. A backbone structure has been determined by solid state nuclear magnetic resonance (NMR). Though detailed structures for the side chains are not available yet, evidence has indicated that His37 and Trp41 in the alpha-helix are implicated in the local molecular structure responsible for the selectivity and channel gate. More definitive conformations for the two residues were recently suggested based on the known backbone structure and recently obtained NMR data. While two competitive proton-conductance mechanisms have been proposed, the actual proton-conductance mechanism remains an unsolved problem. Computer simulations of an excess proton in the channel and computational studies of the His37/Trp41 conformations have provided insights into these structural and mechanism issues.

Small-molecule therapeutics for the treatment of glycolipid lysosomal storage disorders

Glycosphingolipid (GSL) lysosomal storage disorders are a small but challenging group of human diseases to treat. Although these disorders appear to be monogenic in origin, where the catalytic activity of enzymes in GSL catabolism is impaired, the clinical presentation and severity of disease are heterogeneous. Present attitudes to treatment demand individual therapeutics designed to match the specific disease-related gene defect; this is an acceptable approach for those diseases with high frequency, but it lacks viability for extremely rare conditions. An alternative therapeutic approach termed 'substrate deprivation' or 'substrate reduction therapy' (SRT) aims to balance cellular GSL biosynthesis with the impairment in catalytic activity seen in lysosomal storage disorders. The development of N-alkylated iminosugars that have inhibitory activity against the first enzyme in the pathway for glucosylating sphingolipid in eukaryotic cells, ceramide-specific glucosyltransferase, offers a generic therapeutic for the treatment of all glucosphingolipidoses. The successful use of N-alkylated iminosugars to establish SRT as an alternative therapeutic strategy has been demonstrated in in vitro, in vivo and in clinical trials for type 1 Gaucher disease. The implications of these studies and the prospects of improvement to the design of iminosugar compounds for treating Gaucher and other GSL lysosomal storage disorders will be discussed.

Membrane peptides and their role in protobiological evolution

How simple membrane peptides performed such essential protocellular functions as transport of ions and organic matter across membranes separating the interior of the cell from the environment, capture and utilization of energy, and transduction of environmental signals, is a key question in protobiological evolution. On the basis of detailed, molecular-level computer simulations we explain how these peptides fold at water-membrane interfaces, insert into membranes, self-assemble into higher-order structures and acquire functions. We have investigated the interfacial behavior and folding of several peptides built of leucine and glutamine residues and have demonstrated that many of them tend to adopt ordered structures. Further, we have studied the insertion of an alpha-helical peptide containing leucine (L) and serine (S) of the form (LSLLLSL)3 into a model membrane. The transmembrane state is metastable, and approximately 15 kcal mol(-1) is required to insert the peptide into the membrane. Investigations of dimers formed by (LSLLLSL)3 and glycophorin A demonstrate how the favorable free energy of helix association can offset the unfavorable free energy of insertion, leading to self-assembly of peptide helices in the membrane. An example of a self-assembled structure is the tetrameric transmembrane pore of the influenza virus M2 protein, which is an efficient and selective voltage-gated proton channel. Our simulations explain the gating mechanism and provide guidelines how to re-engineer the channel to act as a simple proton pump. In general, emergence of integral membrane proteins appears to be quite feasible and may be easier to envision than the emergence of water-soluble proteins.

How do helix-helix interactions help determine the folds of membrane proteins? Perspectives from the study of homo-oligomeric helical bundles

The final, structure-determining step in the folding of membrane proteins involves the coalescence of preformed transmembrane helices to form the native tertiary structure. Here, we review recent studies on small peptide and protein systems that are providing quantitative data on the interactions that drive this process. Gel electrophoresis, analytical ultracentrifugation, and fluorescence resonance energy transfer (FRET) are useful methods for examining the assembly of homo-oligomeric transmembrane helical proteins. These methods have been used to study the assembly of the M2 proton channel from influenza A virus, glycophorin, phospholamban, and several designed membrane proteins-all of which have a single transmembrane helix that is sufficient for association into a transmembrane helical bundle. These systems are being studied to determine the relative thermodynamic contributions of van der Waals interactions, conformational entropy, and polar interactions in the stabilization of membrane proteins. Although the database of thermodynamic information is not yet large, a few generalities are beginning to emerge concerning the energetic differences between membrane and water-soluble proteins: the packing of apolar side chains in the interior of helical membrane proteins plays a smaller, but nevertheless significant, role in stabilizing their structure. Polar, hydrogen-bonded interactions occur less frequently, but, nevertheless, they often provide a strong driving force for folding helix-helix pairs in membrane proteins. These studies are laying the groundwork for the design of sequence motifs that dictate the association of membrane helices.

The closed state of a H+ channel helical bundle combining precise orientational and distance restraints from solid state NMR

An interhelical distance has been precisely measured by REDOR solid-state NMR spectroscopy in the transmembrane tetrameric bundle of M2-TMP, from the M2 proton channel of the influenza A viral coat. The high-resolution structure of the helical backbone has been determined using orientational restraints from uniformly aligned peptide preparations in hydrated dimyristoylphosphatidylcholine bilayers. Here, the distance between (15)N(pi) labeled His37 and (13)C(gamma) labeled Trp41 is determined to be less than 3.9 A. Such a short distance, in combination with the known tilt and rotational orientation of the individual helices, permits not only a determination of which specific side chain pairings give rise to the interaction, but also the side chain torsion angles and restraints for the tetrameric bundle can also be characterized. The resulting proton channel structure is validated in a variety of ways. Both histidine and tryptophan side chains are oriented in toward the pore where they can play a significant functional role. The channel appears to be closed by the proximity of the four indoles consistent with electrophysiology and mutagenesis studies of the intact protein at pH 7.0 and above. The pore maintains its integrity to the N terminal side of the membrane, and at the same time, a cavity is generated that appears adequate for binding amantadine. Finally, the observation of a 2 kHz coupling in the PISEMA spectrum of (15)N(pi)His37 validates the orientation of the His37 side chain based on the observed REDOR distance.

Molecular dynamics simulation of proton transport through the influenza A virus M2 channel

The structural and dynamical properties of a solvated proton in the influenza A virus M2 channel are studied using a molecular dynamics (MD) simulation technique. The second-generation multi-state empirical valence bond (MS-EVB2) model was used to describe the interaction between the excess proton and the channel environment. Solvation structures of the excess proton and its mobility characteristics along the channel were determined. It was found that the excess proton is capable of crossing the channel gate formed by the ring of four histidine residues even though the gate was only partially open. Although the hydronium ion itself did not cross the channel gate by traditional diffusion, the excess proton was able to transport through the ring of histidine residues by hopping between two water molecules located at the opposite sides of the gate. Our data also indicate that the proton diffusion through the channel may be correlated with the changes in channel conformations. To validate this observation, a separate simulation of the proton in a "frozen" channel has been conducted, which showed that the proton mobility becomes inhibited.

Early steps of the intramolecular signal transduction in rhodopsin explored by molecular dynamics simulations

We present molecular dynamics simulations of bovine rhodopsin in a membrane mimetic environment based on the recently refined X-ray structure of the pigment. The interactions between the protonated Schiff base and the protein moiety are explored both with the chromophore in the dark-adapted 11-cis and in the photoisomerized all-trans form. Comparison of simulations with Glu181 in different protonation states strongly suggests that this loop residue located close to the 11-cis bond bears a negative charge. Restrained molecular dynamics simulations also provide evidence that the protein tightly confines the absolute conformation of the retinal around the C12-C13 bond to a positive helicity. 11-cis to all-trans isomerization leads to an internally strained chromophore, which relaxes after a few nanoseconds by a switching of the ionone ring to an essentially planar all-trans conformation. This structural transition of the retinal induces in turn significant conformational changes of the protein backbone, especially in helix VI. Our results suggest a possible molecular mechanism for the early steps of intramolecular signal transduction in a prototypical G-protein-coupled receptor.

Sequence determinants of the energetics of folding of a transmembrane four-helix-bundle protein

Although previous studies are beginning to point to the specific types of helix-helix interactions that stabilize the folds of membrane-bound helical proteins, quantitative thermodynamic data on natural membrane proteins has been very limited. Here the database is expanded substantially by adding thermodynamic data for a series of sequence variants of M2 protein from influenza A virus. The M2 protein has a single transmembrane helix that homotetramerizes to form proton-selective channels that are essential to virus function. To determine the contributions of specific residues to the folding of this protein, a series of transmembrane peptides with single-site changes near the core of the protein were studied by using sedimentation equilibrium analytical ultracentrifugation. Remarkably, a large number of the mutations increased the stability of the protein. The free energies of tetramerization of the variants can be understood in terms of current models for the structure of the protein. In general, the energetic consequences of the mutations are smaller than those observed for similar mutations in water-soluble proteins. This observation is consistent with previous studies and hence may represent a general phenomenon.

Viral ion channels: structure and function

Viral ion channels are short auxiliary membrane proteins with a length of ca. 100 amino acids. They are found in enveloped viruses from influenza A, influenza B and influenza C (Orthomyxoviridae), and the human immunodeficiency virus type 1 (HIV-1, Retroviridae). The channels are called M2 (influenza A), NB (influenza B), CM2 (influenza C) and Vpu (HIV-1). Recently, in Paramecium bursaria chlorella virus (PBCV-1, Phycodnaviridae), a K+ selective ion channel has been discovered. The viral channels form homo oligomers to allow an ion flux and represent miniaturised systems. Proton conductivity of M2 is established; NB, Vpu and the potassium channel from PBC-1 conduct ions; for CM2 ion conductivity is still under proof. This review summarises the current knowledge of these short viral membrane proteins. Their discovery is outlined and experimental evidence for their structure and function is discussed. Studies using computational methods are presented as well as investigations of drug-protein interactions.

Tetraethylammonium binding to the outer mouth of the KcsA potassium channel: implications for ion permeation

Extracellular tetraethylammonium (TEA+) inhibits the current carried out by K+ ions in potassium channels. Structural models of wild-type (WT) and Y82C KcsA K+ channel/TEA+ complexes are here built using docking procedures, electrostatics calculations and molecular dynamics simulations. The calculations are based on the structure determined by Doyle et al. (11) Our calculations suggest that in WT, the TEA+ cation turns binds at the outer mouth of the selectivity filter, stabilized by electrostatic and hydrophobic interactions with the four Tyr82 side chains. Replacement of Tyr82 with Cys causes a decrease of the affinity of the cation for the channel, consistently with the available site-directed mutagenesis data (16). An MD simulation in which K+ replaces TEA+ provides evidence that TEA+ binding site can accommodate a potassium ion, in agreement with the high-resolution structure recently reported by Zhou et al. (20)