An investigation of the nature and function of module 10 in a family F/10 xylanase FXYN of Streptomyces olivaceoviridis E-86 by module shuffling with the Cex of Cellulomonas fimi and by site-directed mutagenesis

Structure-based substrate specificity analysis of GH11 xylanase from Streptomyces olivaceoviridis E-86

Although many xylanases have been studied, many of the characteristics of xylanases toward branches in xylan remain unclear. In this study, the substrate specificity of a GH11 xylanase from Streptomyces olivaceoviridis E-86 (SoXyn11B) was elucidated based on its three-dimensional structure. Subsite mapping suggests that SoXyn11B has seven subsites (four subsites on the - side and three subsites on the + side), and it is one longer than the GH10 xylanase from S. olivaceoviridis (SoXyn10A). SoXyn11B has no affinity for the subsites at either end of the scissile glycosidic bond, and the sugar-binding energy at subsite - 2 was the highest, followed by subsite + 2. These properties were very similar to those of SoXyn10A. In contrast, SoXyn11B produced different branched oligosaccharides from bagasse compared with those of SoXyn10A. These branched oligosaccharides were identified as O-β-D-xylopyranosyl-(1→4)-[O-α-L-arabinofuranosyl-(1→3)]-O-β-D-xylopyranosyl-(1→4)-β-D-xylopyranosyl-(1→4)-β-D-xylopyranose (Ara³Xyl₄) and O-β-D-xylopyranosyl-(1→4)-[O-4-O-methyl-α-D-glucuronopyranosyl-(l→2)]-β-D-xylopyranosyl-(1→4)-β-D-xylopyranosyl-(1→4)-β-D-xylopyranose (MeGlcA³Xyl₄) by nuclear magnetic resonance (NMR) and electrospray ionization mass spectrometry (ESI-MS) and confirmed by crystal structure analysis of SoXyn11B in complex with these branched xylooligosaccharides. SoXyn11B has a β-jerryroll fold structure, and the catalytic cleft is located on the inner β-sheet of the fold. The ligand-binding structures revealed seven subsites of SoXyn11B. The 2- and 3-hydroxy groups of xylose at the subsites + 3, + 2, and - 3 face outwards, and an arabinose or a glucuronic acid side chain can be linked to these positions. These subsite structures appear to cause the limited substrate specificity of SoXyn11B for branched xylooligosaccharides. KEY POINTS: • Crystal structure of family 11 β-xylanase from Streptomyces olivaceoviridis was determined. • Topology of substrate-binding cleft of family 11 β-xylanase from Streptomyces olivaceoviridis was characterized. • Mode of action of family 11 β-xylanase from Streptomyces olivaceoviridis for substitutions in xylan was elucidated.

Substrate Specificities of GH8, GH39, and GH52 β-xylosidases from Bacillus halodurans C-125 Toward Substituted Xylooligosaccharides

Substrate specificities of glycoside hydrolase families 8 (Rex), 39 (BhXyl39), and 52 (BhXyl52) β-xylosidases from Bacillus halodurans C-125 were investigated. BhXyl39 hydrolyzed xylotriose most efficiently among the linear xylooligosaccharides. The activity decreased in the order of xylohexaose > xylopentaose > xylotetraose and it had little effect on xylobiose. In contrast, BhXyl52 hydrolyzed xylobiose and xylotriose most efficiently, and its activity decreased when the main chain became longer as follows: xylotetraose > xylopentaose > xylohexaose. Rex produced O-β-D-xylopyranosyl-(1 → 4)-[O-α-L-arabinofuranosyl-(1 → 3)]-O-β-D-xylopyranosyl-(1 → 4)-β-D-xylopyranose (Ara²Xyl₃) and O-β-D-xylopyranosyl-(1 → 4)-[O-4-O-methyl-α-D-glucuronopyranosyl-(l → 2)]-β-D-xylopyranosyl-(1 → 4)-β-D-xylopyranose (MeGlcA²Xyl₃), which lost a xylose residue from the reducing end of O-β-D-xylopyranosyl-(1 → 4)-[O-α-L-arabinofuranosyl-(1 → 3)]-O-β-D-xylopyranosyl-(1 → 4)-β-D-xylopyranosyl-(1 → 4)-β-D-xylopyranose (Ara³Xyl₄) and O-β-D-xylopyranosyl-(1 → 4)-[O-4-O-methyl-α-D-glucuronopyranosyl-(1 → 2)]-β-D-xylopyranosyl-(1 → 4)-β-D-xylopyranosyl-(1 → 4)-β-D-xylopyranose (MeGlcA³Xyl₄). It was considered that there is no space to accommodate side chains at subsite -1. BhXyl39 rapidly hydrolyzes the non-reducing-end xylose linkages of MeGlcA³Xyl₄, while the arabinose branch does not significantly affect the enzyme activity because it degrades Ara³Xyl₄ as rapidly as unmodified xylotetraose. The model structure suggested that BhXyl39 enhanced the activity for MeGlcA³Xyl₄ by forming a hydrogen bond between glucuronic acid and Lys265. BhXyl52 did not hydrolyze Ara³Xyl₄ and MeGlcA³Xyl₄ because it has a narrow substrate binding pocket and 2- and 3-hydroxyl groups of xylose at subsite +1 hydrogen bond to the enzyme.

Evaluation of Ammonia Pretreatment for Enzymatic Hydrolysis of Sugarcane Bagasse to Recover Xylooligosaccharides

Sugarcane bagasse is a useful biomass resource. In the present study, we examined the efficacy of ammonia pretreatment for selective release of hemicellulose from bagasse. Pretreatment of bagasse with aqueous ammonia resulted in significant loss of xylan. In contrast, pretreatment of bagasse with anhydrous ammonia resulted in almost no xylan loss. Aqueous ammonia or anhydrous ammonia-pretreated bagasse was then subjected to enzymatic digestion with a xylanase from the glycoside hydrolase (GH) family 10 or a xylanase from the GH family 11. The hydrolysis rate of xylan in bagasse pretreated with aqueous ammonia was approximately 50 %. In contrast, in the anhydrous ammonia-treated bagasse, xylan hydrolysis was > 80 %. These results suggested that anhydrous ammonia pretreatment would be an effective method for preparation of sugarcane bagasse for enzymatic hydrolysis to recover xylooligosaccharides.

Functional Characterization of the GH10 and GH11 Xylanases from Streptomyces olivaceoviridis E-86 Provide Insights into the Advantage of GH11 Xylanase in Catalyzing Biomass Degradation

We functionally characterized the GH10 xylanase (SoXyn10A) and the GH11 xylanase (SoXyn11B) derived from the actinomycete Streptomyces olivaceoviridis E-86. Each enzyme exhibited differences in the produced reducing power upon degradation of xylan substrates. SoXyn10A produced higher reducing power than SoXyn11B. Gel filtration of the hydrolysates generated by both enzymes revealed that the original substrate was completely decomposed. Enzyme mixtures of SoXyn10A and SoXyn11B produced the same level of reducing power as SoXyn10A alone. These observations were in good agreement with the composition of the hydrolysis products. The hydrolysis products derived from the incubation of soluble birchwood xylan with a mixture of SoXyn10A and SoXyn11B produced the same products as SoXyn10A alone with similar compositions. Furthermore, the addition of SoXyn10A following SoXyn11B-mediated digestion of xylan produced the same products as SoXyn10A alone with similar compositions. Thus, it was hypothesized that SoXyn10A could degrade xylans to a smaller size than SoXyn11B. In contrast to the soluble xylans as the substrate, the produced reducing power generated by both enzymes was not significantly different when pretreated milled bagasses were used as substrates. Quantification of the pentose content in the milled bagasse residues after the enzyme digestions revealed that SoXyn11B hydrolyzed xylans in pretreated milled bagasses much more efficiently than SoXyn10A. These data suggested that the GH10 xylanases can degrade soluble xylans smaller than the GH11 xylanases. However, the GH11 xylanases may be more efficient at catalyzing xylan degradation in natural environments (e.g. biomass) where xylans interact with celluloses and lignins.

A review on chimeric xylanases: methods and conditions

Multi-functional enzymes are one of the nature's solutions to facilitate metabolic pathways, thus several reactions are regulated and performed simultaneously on one polypeptide chain. Inspired by nature, artificial chimeric proteins have been designed to reduce the production costs and improve the performance. One of the interesting applications of this method is in the plant-based industries such as feed additive, waste treatment, biofuel production, and pulp and paper bleaching. In fact, the heterogeneous texture of plants needs using a combination of different enzymes to achieve an optimal quality in the manufacturing process. Given that xylans are the most abundant non-cellulosic polysaccharides in nature, xylanases are widely utilized in the mentioned industries. In this regard, several studies have been conducted to develop the relevant chimeric enzymes. Despite the successes that have been attained in this field, misfolding, functional or structural interference, and linker breakage have been reported in some cases. The present paper reviews the research to introduce the prerequisites to design an appropriate chimeric xylanase.

Crystallographic snapshots of an entire reaction cycle for a retaining xylanase from Streptomyces olivaceoviridis E-86

Retaining glycosyl hydrolases, which catalyse both glycosylation and deglycosylation in a concerted manner, are the most abundant hydrolases. To date, their visualization has tended to be focused on glycosylation because glycosylation reactions can be visualized by inactivating deglycosylation step and/or using substrate analogues to isolate covalent intermediates. Furthermore, during structural analyses of glycosyl hydrolases with hydrolytic reaction products by the conventional soaking method, mutarotation of an anomeric carbon in the reaction products promptly and certainly occurs. This undesirable structural alteration hinders visualization of the second step in the reaction. Here, we investigated X-ray crystallographic visualization as a possible method for visualizing the conformational itinerary of a retaining xylanase from Streptomyces olivaceoviridis E-86. To clearly define the stereochemistry at the anomeric carbon during the deglycosylation step, extraneous nucleophiles, such as azide, were adopted to substitute for the missing base catalyst in an appropriate mutant. The X-ray crystallographic visualization provided snapshots of the components of the entire reaction, including the E*S complex, the covalent intermediate, breakdown of the intermediate and the enzyme-product (E*P)complex.

Structure of rat acidic fibroblast growth factor at 1.4 A resolution

Fibroblast growth factors (FGFs) constitute a family of 22 structurally related heparin-binding polypeptides that are involved in the regulation of cell growth, survival, differentiation and migration. Here, a 1.4 A resolution X-ray structure of rat FGF1 is presented. Two molecules are present in the asymmetric unit of the crystal and they coordinate a total of five sulfate ions. The structures of human, bovine and newt FGF1 have been published previously. Human and rat FGF1 are found to have very similar structures.

An atomic resolution structure for human fibroblast growth factor 1

A 1.10-A atomic resolution X-ray structure of human fibroblast growth factor 1 (FGF-1), a member of the beta-trefoil superfold, has been determined. The beta-trefoil is one of 10 fundamental protein superfolds and is the only superfold to exhibit 3-fold structural symmetry (comprising 3 "trefoil" units). The quality of the diffraction data permits unambiguous assignment of Asn, Gln, and His rotamers, Pro ring pucker, as well as refinement of atomic anisotropic displacement parameters (ADPs). The FGF-1 structure exhibits numerous core-packing defects, detectable using a 1.0-A probe radius. In addition to contributing to the relatively low thermal stability of FGF-1, these defects may also permit domain motions within the structure. The availability of refined ADPs allows a translation/libration/screw (TLS) analysis of putative rigid body domains. The TLS analysis shows that beta-strands 6-12 together form a rigid body, and there is a clear demarcation in TLS motions between the adjacent carboxyl- and amino-termini. Although separate from beta-strands 6-12, the individual beta-strands 1-5 do not exhibit correlated motions; thus, this region appears to be comparatively flexible. The heparin-binding contacts of FGF-1 are located within beta-strands 6-12; conversely, a significant portion of the receptor-binding contacts are located within beta-strands 1-5. Thus, the observed rigid body motion in FGF-1 appears related to the ligand-binding functionalities.

Accommodation of a highly symmetric core within a symmetric protein superfold

An alternative core packing group, involving a set of five positions, has been introduced into human acidic FGF-1. This alternative group was designed so as to constrain the primary structure within the core region to the same threefold symmetry present in the tertiary structure of the protein fold (the beta-trefoil superfold). The alternative core is essentially indistinguishable from the WT core with regard to structure, stability, and folding kinetics. The results show that the beta-trefoil superfold is compatible with a threefold symmetric constraint on the core region, as might be the case if the superfold arose as a result of gene duplication/fusion events. Furthermore, this new core arrangement can form the basis of a structural "building block" that can greatly simplify the de novo design of beta-trefoil proteins by using symmetric structural complementarity. Remaining asymmetry within the core appears to be related to asymmetry in the tertiary structure associated with receptor and heparin binding functionality of the growth factor.

Structure and function of a family 10 beta-xylanase chimera of Streptomyces olivaceoviridis E-86 FXYN and Cellulomonas fimi Cex

The catalytic domain of xylanases belonging to glycoside hydrolase family 10 (GH10) can be divided into 22 modules (M1 to M22; Sato, Y., Niimura, Y., Yura, K., and Go, M. (1999) Gene (Amst.) 238, 93-101). Inspection of the crystal structure of a GH10 xylanase from Streptomyces olivaceoviridis E-86 (SoXyn10A) revealed that the catalytic domain of GH10 xylanases can be dissected into two parts, an N-terminal larger region and C-terminal smaller region, by the substrate binding cleft, corresponding to the module border between M14 and M15. It has been suggested that the topology of the substrate binding clefts of GH10 xylanases are not conserved (Charnock, S. J., Spurway, T. D., Xie, H., Beylot, M. H., Virden, R., Warren, R. A. J., Hazlewood, G. P., and Gilbert, H. J. (1998) J. Biol. Chem. 273, 32187-32199). To facilitate a greater understanding of the structure-function relationship of the substrate binding cleft of GH10 xylanases, a chimeric xylanase between SoXyn10A and Xyn10A from Cellulomonas fimi (CfXyn10A) was constructed, and the topology of the hybrid substrate binding cleft established. At the three-dimensional level, SoXyn10A and CfXyn10A appear to possess 5 subsites, with the amino acid residues comprising subsites -3 to +1 being well conserved, although the +2 subsites are quite different. Biochemical analyses of the chimeric enzyme along with SoXyn10A and CfXyn10A indicated that differences in the structure of subsite +2 influence bond cleavage frequencies and the catalytic efficiency of xylooligosaccharide hydrolysis. The hybrid enzyme constructed in this study displays fascinating biochemistry, with an interesting combination of properties from the parent enzymes, resulting in a low production of xylose.

Barley α-amylase/subtilisin inhibitor: structure, biophysics and protein engineering

Bifunctional alpha-amylase/subtilisin inhibitors have been implicated in plant defence and regulation of endogenous alpha-amylase action. The barley alpha-amylase/subtilisin inhibitor (BASI) inhibits the barley alpha-amylase 2 (AMY2) and subtilisin-type serine proteases. BASI belongs to the Kunitz-type trypsin inhibitor family of the beta-trefoil fold proteins. Diverse approaches including site-directed mutagenesis, hybrid constructions, and crystallography have been used to characterise the structures and contact residues in the AMY2/BASI complex. The three-dimensional structure of the AMY2/BASI complex is characterised by a completely hydrated Ca2+ situated at the protein interface that connects the three catalytic carboxyl groups in AMY2 with side chains in BASI via water molecules. Using surface plasmon resonance (SPR) and isothermal titration calorimetry (ITC), we have recently demonstrated Ca2+-modulated kinetics of the AMY2/BASI interaction and found that the complex formation involves minimal structural changes. The modulation of the interaction by calcium ions makes it unique among the currently known binding mechanisms of proteinaceous alpha-amylase inhibitors.

Crystal structures of decorated xylooligosaccharides bound to a family 10 xylanase from Streptomyces olivaceoviridis E-86

The family 10 xylanase from Streptomyces olivaceoviridis E-86 (SoXyn10A) consists of a GH10 catalytic domain, which is joined by a Gly/Pro-rich linker to a family 13 carbohydrate-binding module (CBM13) that interacts with xylan. To understand how GH10 xylanases and CBM13 recognize decorated xylans, the crystal structure of SoXyn10A was determined in complex with alpha-l-arabinofuranosyl- and 4-O-methyl-alpha-d-glucuronosyl-xylooligosaccharides. The bound sugars were observed in the subsites of the catalytic cleft and also in subdomains alpha and gamma of CBM13. The data reveal that the binding mode of the oligosaccharides in the active site of the catalytic domain is entirely consistent with the substrate specificity and, in conjunction with the accompanying paper, demonstrate that the accommodation of the side chains in decorated xylans is conserved in GH10 xylanases of SoXyn10A against arabinoglucuronoxylan. CBM13 was shown to bind xylose or xylooligosaccharides reversibly by using nonsymmetric sugars as the ligands. The independent multiple sites in CBM13 may increase the probability of substrate binding.

First crystallographic structure of a xylanase from glycoside hydrolase family 5: implications for catalysis

The room-temperature structure of xylanase (EC 3.2.1.8) from the bacterial plant pathogen Erwinia chrysanthemi expressed in Escherichia coli, a 45 kDa, 413-amino acid protein belonging to glycoside hydrolase family 5, has been determined by multiple isomorphous replacement and refined to a resolution of 1.42 A. This represents the first structure of a xylanase not belonging to either glycoside hydrolase family 10 or family 11. The enzyme is composed of two domains similar to most family 10 xylanases and the alpha-amylases. The catalytic domain (residues 46-315) has a (beta/alpha)(8)-barrel motif with a binding cleft along the C-terminal side of the beta-barrel. The catalytic residues, Glu165 and Glu253, determined by correspondence to other family 5 and family 10 glycoside hydrolases, lie inside this cleft on the C-terminal ends of beta-strands 4 and 7, respectively, with an O(epsilon)2...O(epsilon)1 distance of 4.22 A. The smaller domain (residues 31-43 and 323-413) has a beta(9)-barrel motif with five of the strands interfacing with alpha-helices 7 and 8 of the catalytic domain. The first 13 N-terminal residues form one beta-strand of this domain. Residues 44, 45, and 316-322 form the linkers between this domain and the catalytic domain.

Functional characterization of domains found within a lytic enzyme produced by Streptococcus equi subsp. zooepidemicus

Zoocin A is a lysostaphin-like streptococcolytic enzyme produced by Streptococcus equi subsp. zooepidemicus 4881 that specifically targets the cell walls of some closely related species. On the basis of sequence homology it was suggested that zoocin A was a domain-structured enzyme with the N-terminal domain responsible for catalysis (CAT) and the C-terminal domain for target recognition (SBD). Polypeptides corresponding to zoocin A (rZooA) and each of the putative domains (rCAT and rSBD) were prepared by use of recombinant technology. The biological activities of each was compared by use of a dye-release assay and a cell-binding assay. Cell wall hydrolysis was shown to be a function of CAT and target recognition a function of the SBD. Expression of the zoocin A immunity factor gene produced cell walls resistant to hydrolysis by either rZooA or its component domains, and with reduced capacity to bind rZooA and rSBD.

Structure-based combinatorial protein engineering (SCOPE)

Presented here is the development a semi-rational protein engineering approach that uses information from protein structure coupled with established DNA manipulation techniques to design and create multiple crossover libraries from non-homologous genes. The utility of structure-based combinatorial protein engineering (SCOPE) was demonstrated by its application to two distantly related members of the X-family of DNA polymerases: rat DNA polymerase beta (Pol beta) and African swine fever virus DNA polymerase X (Pol X). These proteins share similar folds but have low sequence identity, and differ greatly in both size and activity. "Equivalent" subdomain elements of structure were designed on the basis of the tertiary structure of Pol beta and the corresponding regions of Pol X were inferred from homology modeling and sequence alignment analysis. Libraries of chimeric genes with up to five crossovers were synthesized in a series of PCR reactions by employing hybrid oligonucleotides that code for variable connections between structural elements. Genetic complementation in Escherichia coli enabled identification of several novel DNA polymerases with enhanced phenotypes. Both the composition of structural elements and the manner in which they were linked were shown to be essential for this property, indicating the importance of these aspects of design.

Crystal structures of the sugar complexes of Streptomyces olivaceoviridis E-86 xylanase: sugar binding structure of the family 13 carbohydrate binding module

The family 10 xylanase from Streptomyces olivaceoviridis E-86 contains a (beta/alpha)(8)-barrel as a catalytic domain, a family 13 carbohydrate binding module (CBM) as a xylan binding domain (XBD) and a Gly/Pro-rich linker between them. The crystal structure of this enzyme showed that XBD has three similar subdomains, as indicated by the presence of a triple-repeated sequence, forming a galactose binding lectin fold similar to that found in the ricin toxin B-chain. Comparison with the structure of ricin/lactose complex suggests three potential sugar binding sites in XBD. In order to understand how XBD binds to the xylan chain, we analyzed the sugar-complex structure by the soaking experiment method using the xylooligosaccharides and other sugars. In the catalytic cleft, bound sugars were observed in the xylobiose and xylotriose complex structures. In the XBD, bound sugars were identified in subdomains alpha and gamma in all of the complexes with xylose, xylobiose, xylotriose, glucose, galactose and lactose. XBD binds xylose or xylooligosaccharides at the same sugar binding sites as in the case of the ricin/lactose complex but its binding manner for xylose and xylooligosaccharides is different from the galactose binding mode in ricin, even though XBD binds galactose in the same manner as in the ricin/galactose complex. These different binding modes are utilized efficiently and differently to bind the long substrate to xylanase and ricin-type lectin. XBD can bind any xylose in the xylan backbone, whereas ricin-type lectin recognizes the terminal galactose to sandwich the large sugar chain, even though the two domains have the same family 13 CBM structure. Family 13 CBM has rather loose and broad sugar specificities and is used by some kinds of proteins to bind their target sugars. In such enzyme, XBD binds xylan, and the catalytic domain may assume a flexible position with respect to the XBD/xylan complex, inasmuch as the linker region is unstructured.

Structure and stability effects of mutations designed to increase the primary sequence symmetry within the core region of a beta-trefoil

Human acidic fibroblast growth factor (FGF-1) is a member of the beta-trefoil hyperfamily and exhibits a characteristic threefold symmetry of the tertiary structure. However, evidence of this symmetry is not readily apparent at the level of the primary sequence. This suggests that while selective pressures may exist to retain (or converge upon) a symmetric tertiary structure, other selective pressures have resulted in divergence of the primary sequence during evolution. Using intra-chain and homologue sequence comparisons for 19 members of this family of proteins, we have designed mutants of FGF-1 that constrain a subset of core-packing residues to threefold symmetry at the level of the primary sequence. The consequences of these mutations regarding structure and stability were evaluated using a combination of X-ray crystallography and differential scanning calorimetry. The mutational effects on structure and stability can be rationalized through the characterization of "microcavities" within the core detected using a 1.0A probe radius. The results show that the symmetric constraint within the primary sequence is compatible with a well-packed core and near wild-type stability. However, despite the general maintenance of overall thermal stability, a noticeable increase in non-two-state denaturation follows the increase in primary sequence symmetry. Therefore, properties of folding, rather than stability, may contribute to the selective pressure for asymmetric primary core sequences within symmetric protein architectures.

Two sequence elements of glycosyltransferases involved in urdamycin biosynthesis are responsible for substrate specificity and enzymatic activity

BACKGROUND

Two deoxysugar glycosyltransferases (GTs), UrdGT1b and UrdGT1c, involved in urdamycin biosynthesis share 91% identical amino acids. However, the two GTs show different specificities for both nucleotide sugar and acceptor substrate. Generally, it is proposed that GTs are two-domain proteins with a nucleotide binding domain and an acceptor substrate site with the catalytic center in an interface cleft between these domains. Our work aimed at finding out the region responsible for determination of substrate specificities of these two urdamycin GTs.

RESULTS

A series of 10 chimeric GT genes were constructed consisting of differently sized and positioned portions of urdGT1b and urdGT1c. Gene expression experiments in host strains Streptomyces fradiae Ax and XTC show that nine of 10 chimeric GTs are still functional, with either UrdGT1b- or UrdGT1c-like activity. A 31 amino acid region (aa 52-82) located close to the N-terminus of these enzymes, which differs in 18 residues, was identified to control both sugar donor and acceptor substrate specificity. Only one chimeric gene product of the 10 was not functional. Targeted stepwise alterations of glycine 226 (G226R, G226S, G226SR) were made to reintroduce residues conserved among streptomycete GTs. Alterations G226S and G226R restored a weak activity, whereas G226SR showed an activity comparable with other functional chimeras.

CONCLUSIONS

A nucleotide sugar binding motif is present in the C-terminal moiety of UrdGT1b and UrdGT1c from S. fradiae. We could demonstrate that it is an N-terminal section that determines specificity for the nucleotide sugar and also the acceptor substrate. This finding directs the way towards engineering this class of streptomycete enzymes for antibiotic derivatization applications. Amino acids 226 and 227, located outside the putative substrate binding site, might be part of a larger protein structure, perhaps a solvent channel to the catalytic center. Therefore, they could play a role in substrate accessibility to it.

Capacity of thermomonospora alba XylA to impart thermostability in family F/10 chimeric xylanases

To reveal structure-function relationships of family F/10 glycanases, an in vitro molecular level shuffling experiment was conducted to accumulate useful amino acid residues from two homologous F/10 xylanases, FXYN of Streptomyces olivaceoviridis E-86 and XylA of Thermomonospora alba ULJB1, into a single chimeric xylanase. The parent genes were shuffled by crossovers at selected module borders using self-priming Polymerase Chain Reaction (PCR)s. The shuffled constructs, designated as FXYN-M3/4-XylA, FXYN-M9/10-XylA, and FXYN-M14/15-XylA were cloned and their nucleotide sequences were confirmed. Two chimera, FXYN-M3/4-XylA and FXYN-M14/15-XylA, demonstrated activity against RBB-xylan and were over-expressed as His-tag fusion proteins under control of T5 promoter of pQE60. The homogeneously pure chimeric proteins, FXYN-M3/4-XylA and FXYN-M14/15-XylA showed improved thermal and pH profiles compared to those of one of the parents, FXYN. This was apparently due to the influence of amino acids inherited from thermophilic XylA. Measured K(m) and kcat values were closer to those of the other parent, XylA. Interestingly, a significant level of heat tolerance up to 60 degrees C, was recorded for FXYN-M3/4-XylA in comparison to only 40 degrees C for FXYN-M14/15-XylA though their temperature optima did not correlates with their thermal stability. These results indicated that the amino acid residues of the larger T. alba XylA DNA fragment present in FXYN-M3/4-XylA were responsible for inducing its thermal stability.

Module shuffling of a family F/10 xylanase: replacement of modules M4 and M5 of the FXYN of Streptomyces olivaceoviridis E-86 with those of the Cex of Cellulomonas fimi

To facilitate an understanding of structure-function relationships, chimeric xylanases were constructed by module shuffling between the catalytic domains of the FXYN from Streptomyces olivaceoviridis E-86 and the Cex from Cellulomonas fimi. In the family F/10 xylanases, the modules M4 and M5 relate to substrate binding so that modules M4 and M5 of the FXYN were replaced with those of the Cex and the chimeric enzymes denoted FCF-C4, FCF-C5 and FCF-C4,5 were constructed. The k(cat) value of FCF-C5 for p-nitrophenyl-beta-D-cellobioside was similar to that of the FXYN (2.2 s(-1)); however, the k(cat) value of FCF-C4 for p-nitrophenyl-beta-D-cellobioside was significantly higher (7.0 s(-1)). The loss of the hydrogen bond between E46 and S22 or the presence of the I49W mutation would be expected to change the position of Q88, which plays a pivotal role in discriminating between glucose and xylose, resulting in the increased k(cat) value observed for FCF-C4 acting on p-nitrophenyl-beta-D-cellobioside since module M4 directly interacts with Q88. To investigate the synergistic effects of the different modules, module M10 of the FCF-C4 chimera was replaced with that of the Cex. The effects of replacement of module M4 and M10 were almost additive with regard to the K:(m) and k(cat) values.

Novel sugar-binding specificity of the type XIII xylan-binding domain of a family F/10 xylanase from Streptomyces olivaceoviridis E-86

The type XIII xylan-binding domain (XBD) of a family F/10 xylanase (FXYN) from Streptomyces olivaceoviridis E-86 was found to be structurally similar to the ricin B chain which recognizes the non-reducing end of galactose and specifically binds to galactose containing sugars. The crystal structure of XBD [Fujimoto, Z. et al. (2000) J. Mol. Biol. 300, 575-585] indicated that the whole structure of XBD is very similar to the ricin B chain and the amino acids which form the galactose-binding sites are highly conserved between the XBD and the ricin B chain. However, our investigation of the binding abilities of wt FXYN and its truncated mutants towards xylan demonstrated that the XBD bound xylose-based polysaccharides. Moreover, it was found that the sugar-binding unit of the XBD was a trimer, which was demonstrated in a releasing assay using sugar ranging in size from xylose to xyloheptaose. These results indicated that the binding specificity of the XBD was different from those of the same family lectins such as the ricin B chain. Somewhat surprisingly, it was found that lactose could release the XBD from insoluble xylan to a level half of that observed for xylobiose, indicating that the XBD also possessed the same galactose recognition site as the ricin B chain. It appears that the sugar-binding pocket of the XBD has evolved from the ancient ricin super family lectins to bind additional sugar targets, resulting in the differences observed in the sugar-binding specificities between the lectin group (containing the ricin B chain) and the enzyme group.

Substrate specificity in glycoside hydrolase family 10. Tyrosine 87 and leucine 314 play a pivotal role in discriminating between glucose and xylose binding in the proximal active site of Pseudomonas cellulosa xylanase 10A

The Pseudomonas family 10 xylanase, Xyl10A, hydrolyzes beta1, 4-linked xylans but exhibits very low activity against aryl-beta-cellobiosides. The family 10 enzyme, Cex, from Cellulomonas fimi, hydrolyzes aryl-beta-cellobiosides more efficiently than does Xyl10A, and the movements of two residues in the -1 and -2 subsites are implicated in this relaxed substrate specificity (Notenboom, V., Birsan, C., Warren, R. A. J., Withers, S. G., and Rose, D. R. (1998) Biochemistry 37, 4751-4758). The three-dimensional structure of Xyl10A suggests that Tyr-87 reduces the affinity of the enzyme for glucose-derived substrates by steric hindrance with the C6-OH in the -2 subsite of the enzyme. Furthermore, Leu-314 impedes the movement of Trp-313 that is necessary to accommodate glucose-derived substrates in the -1 subsite. We have evaluated the catalytic activities of the mutants Y87A, Y87F, L314A, L314A/Y87F, and W313A of Xyl10A. Mutations to Tyr-87 increased and decreased the catalytic efficiency against 4-nitrophenyl-beta-cellobioside and 4-nitrophenyl-beta-xylobioside, respectively. The L314A mutation caused a 200-fold decrease in 4-nitrophenyl-beta-xylobioside activity but did not significantly reduce 4-nitrophenyl-beta-cellobioside hydrolysis. The mutation L314A/Y87A gave a 6500-fold improvement in the hydrolysis of glucose-derived substrates compared with xylose-derived equivalents. These data show that substantial improvements in the ability of Xyl10A to accommodate the C6-OH of glucose-derived substrates are achieved when steric hindrance is removed.