Post-translational export of maltose-binding protein in Escherichia coli strains harboring malE signal sequence mutations and either prl+ or prl suppressor alleles

Biosensor that Detects Stress Caused by Periplasmic Proteins

Escherichia coli is often used as a factory to produce recombinant proteins. In many cases, the recombinant protein needs disulfide bonds to fold and function correctly. These proteins are genetically fused to a signal peptide so that they are secreted to the oxidizing environment of the periplasm (where the enzymes required for disulfide bond formation exist). Currently, it is difficult to determine in vivo whether a recombinant protein is efficiently secreted from the cytoplasm and folded in the periplasm or if there is a bottleneck in one of these steps because cellular capacity has been exceeded. To address this problem, we have developed a biosensor that detects cellular stress caused by (1) inefficient secretion of proteins from the cytoplasm and (2) aggregation of proteins in the periplasm. We demonstrate how the fluorescence fingerprint obtained from the biosensor can be used to identify induction conditions that do not exceed the capacity of the cell and therefore do not cause cellular stress. These induction conditions result in more effective biomass and in some cases higher titers of soluble recombinant proteins.

Deciphering the possible role of ctxB7 allele on higher production of cholera toxin by Haitian variant Vibrio cholerae O1

Cholera continues to be an important public health concern in developing countries where proper hygiene and sanitation are compromised. This severe diarrheal disease is caused by the Gram-negative pathogen Vibrio cholerae belonging to serogroups O1 and O139. Cholera toxin (CT) is the prime virulence factor and is directly responsible for the disease manifestation. The ctxB gene encodes cholera toxin B subunit (CTB) whereas the A subunit (CTA) is the product of ctxA gene. Enzymatic action of CT depends on binding of B pentamers to the lipid-based receptor ganglioside GM1. In recent years, emergence of V. cholerae Haitian variant strains with ctxB7 allele and their rapid spread throughout the globe has been linked to various cholera outbreaks in Africa and Asia. These strains produce classical type (WT) CTB except for an additional mutation in the signal sequence region where an asparagine (N) residue replaces a histidine (H) at the 20th amino acid position (H20N) of CTB precursor (pre-CTB). Here we report that Haitian variant V. cholerae O1 strains isolated in Kolkata produced higher amount of CT compared to contemporary O1 El Tor variant strains under in vitro virulence inducing conditions. We observed that the ctxB7 allele, itself plays a pivotal role in higher CT production. Based on our in silico analysis, we hypothesized that higher accumulation of toxin subunits from ctxB7 allele might be attributed to the structural alteration at the CTB signal peptide region of pre-H20N CTB. Overall, this study provides plausible explanation regarding the hypertoxigenic phenotype of the Haitian variant strains which have spread globally, possibly through positive selection for increased pathogenic traits.

Long-Lived Folding Intermediates Predominate the Targeting-Competent Secretome

Secretory preproteins carry signal peptides fused amino-terminally to mature domains. They are post-translationally targeted to cross the plasma membrane in non-folded states with the help of translocases, and fold only at their final destinations. The mechanism of this process of postponed folding is unknown, but is generally attributed to signal peptides and chaperones. We herein demonstrate that, during targeting, most mature domains maintain loosely packed folding intermediates. These largely soluble states are signal peptide independent and essential for translocase recognition. These intermediates are promoted by mature domain features: residue composition, elevated disorder, and reduced hydrophobicity. Consequently, a mature domain folds slower than its cytoplasmic structural homolog. Some mature domains could not evolve stable, loose intermediates, and hence depend on signal peptides for slow folding to the detriment of solubility. These unique features of secretory proteins impact our understanding of protein trafficking, folding, and aggregation, and thus place them in a distinct class.

Escherichia coli Twin Arginine (Tat) Mutant Translocases Possessing Relaxed Signal Peptide Recognition Specificities

The twin arginine (Tat) secretion pathway allows the translocation of folded proteins across the cytoplasmic membrane of bacteria. Tat-specific signal peptides contain a characteristic amino acid motif ((S/T)RRXFLK) including two highly conserved consecutive arginine residues that are thought to be involved in the recognition of the signal peptides by the Tat translocase. Here, we have analyzed the specificity of Tat signal peptide recognition by using a genetic approach. Replacement of the two arginine residues in a Tat-specific precursor protein by lysine-glutamine resulted in an export-defective mutant precursor that was no longer accepted by the wild-type translocase. Selection for restored export allowed for the isolation of Tat translocases possessing single mutations in either the amino-terminal domain of TatB or the first cytosolic domain of TatC. The mutant Tat translocases still efficiently accepted the unaltered precursor protein, indicating that the substrate specificity of the translocases was not strictly changed; rather, the translocases showed an increased tolerance toward variations of the amino acids occupying the positions of the twin arginine residues in the consensus motif of a Tat signal peptide.

A symbiont-produced protein and bacterial symbiosis in Amoeba proteus

Gram symbiotic X-bacteria present in the xD strain of Amoeba proteus as required cell components, synthesize and export a large amount of a 29-kDa protein (S29x) into the host's cytoplasm across bacterial and symbiosome membranes. The S29x protein produced by E. coli transformed with the s29x gene is also rapidly secreted into the culture medium. Inside amoebae, S29x enters the host's nucleus as detected by confocal and immunoelectron microscopy, although it is not clear if S29x is selectively accumulated inside the nucleus. The deduced amino-acid sequence of S29x has a stretch of basic amino acids that could act as a nuclear localization signal, but there is no signal peptide at the N-terminus and the transport of S29x is energy independent. The functions of S29x are not known, but in view of its prominent presence inside the amoeba's nucleus, S29x is suspected to be involved in affecting the expression of amoeba's nuclear gene(s).

Suppression of signal sequence defects and azide resistance in Escherichia coli commonly result from the same mutations in secA

The SecA protein of Escherichia coli is required for protein translocation from the cytoplasm. The complexity of SecA function is reflected by missense mutations in the secA gene that confer several different phenotypes: (i) conditional-lethal alleles cause a generalized block in protein secretion, resulting in the cytoplasmic accumulation of the precursor forms of secreted proteins; (ii) azi alleles confer resistance to azide at concentrations up to 4 mM; and (iii) prlD alleles suppress a number of signal sequence mutations in several different genes. To gain further insights into the role of SecA in protein secretion, we have isolated and characterized a large number of prlD mutations, reasoning that these mutations alter a normal function of wild-type SecA. Our results reveal a striking coincidence of signal sequence suppression and azide resistance: the majority of prlD alleles also confer azide resistance, and all azi alleles tested are suppressors. We suggest that this correlation reflects the mechanism(s) of signal sequence suppression. There are two particularly interesting subclasses of prlD and azi alleles. First, four of the prlD and azi alleles exhibit special properties: (i) as suppressors they are potent enough to allow PrlD (SecA) inactivation by a toxic LacZ fusion protein marked with a signal sequence mutation (suppressor-directed inactivation), (ii) they confer azide resistance, and (iii) they cause modest defects in the secretion of wild-type proteins. Sequence analysis reveals that all four of these alleles alter Tyr-134 in SecA, changing it to Ser, Cys, or Asn. The second subclass consists of seven prlD alleles that confer azide supersensitivity, and sequence analysis reveals that six of these alleles are changes of Ala-507 to Val. Both of the affected amino acids are located within different putative ATP-binding regions of SecA and thus may affect ATPase activities of SecA. We suggest that the four azide-resistant mutations slow an ATPase activity of SecA, thus allowing successful translocation of increased amounts of mutant precursor proteins.

PrlA and PrlG suppressors reduce the requirement for signal sequence recognition

Selection for suppressors of defects in the signal sequence of secretory proteins has led most commonly to identification of prlA alleles and less often to identification of prlG alleles. These genes, secY/prlA and secE/prlG, encode integral membrane components of the protein translocation system of Escherichia coli. We demonstrate that an outer membrane protein, LamB, that lacks a signal sequence can be exported with reasonable efficiency in both prlA and prlG suppressor strains. Although the signal sequence is not absolutely required for export of LamB, the level of export in the absence of prl suppressor alleles is exceedingly low. Such strains are phenotypically LamB-, and functional LamB can be detected only by using sensitive infectious-center assays. Suppression of the LamB signal sequence deletion is dependent on normal components of the export pathway, indicating that suppression is not occurring through a bypass mechanism. Our results indicate that the majority of the known prlA suppressors function by an identical mechanism and, further, that the prlG suppressors work in a similar fashion. We propose that both PrlA and PrlG suppressors lack a proofreading activity that normally rejects defective precursors from the export pathway.

Thirty-three amino acids of the mature moiety of an unprocessed maltose-binding protein are sufficient for export in Escherichia coli

Maltose-binding protein (MBP) is translocated across the cytoplasmic membrane of Escherichia coli; successful export depends on information in both the signal peptide and the mature moiety of the protein. To determine the shortest portion of the mature region that would maintain detectable entry of MBP into the export pathway, we took advantage of the properties of an MBP species with proline substituted in the +1 position relative to the cleavage site (MBP27-P). This protein efficiently crosses the cytoplasmic membrane but is not processed and acts as a competitive inhibitor of signal peptidase I (leader peptidase). Export of MBP27-P is measured by the inhibition of processing of other proteins, such as ribose-binding protein (RBP). A series of truncated derivatives of MBP27-P were tested for the ability to inhibit processing of RBP. An MBP27-P species with only 33 amino acids of the mature moiety inhibited processing of RBP, indicating that this truncated polypeptide was probably exported and interacted with signal peptidase I.

Regions of maltose-binding protein that influence SecB-dependent and SecA-dependent export in Escherichia coli

In Escherichia coli, the efficient export of maltose-binding protein (MBP) is dependent on the chaperone SecB, whereas export of ribose-binding protein (RBP) is SecB independent. To localize the regions of MBP involved in interaction with SecB, hybrids between MBP and RBP in SecB mutant cells were constructed and analyzed. One hybrid consisted of the signal peptide and first third of the mature moiety of MBP, followed by the C-terminal two-thirds of RBP (MBP-RBP112). This hybrid was dependent upon SecB for its efficient export and exhibited a strong export defect in secA mutant cells. A hybrid between RBP and MBP with the same fusion point was also constructed (RBP-MBP116). The RBP-MBP116 hybrid remained SecB independent and only exhibited a partial export defect in secA mutant cells. In addition, MBP species with specific alterations in the early mature region were less dependent on SecB for their efficient export. The export of these altered MBP species was also less affected in secA mutant cells and in cells treated with sodium azide. These results present additional evidence for the targeting role of SecB.

Alterations in the hydrophilic segment of the maltose-binding protein (MBP) signal peptide that affect either export or translation of MBP

Mutations that reduce the net positive charge within the hydrophilic segments of the signal peptides of several prokaryotic exported proteins can result in a reduction in the rate of protein export, as well as a reduction in protein synthesis (M. N. Hall, J. Gabay, and M. Shwartz, EMBO J. 2:15-19, 1983; S. Inouye, X. Soberon, T. Franceschini, K. Nakamura, K. Itakura, and M. Inouye, Proc. Natl. Acad. Sci. USA 79:3438-3441, 1982; J. W. Puziss, J. D. Fikes, and P. J. Bassford, Jr., J. Bacteriol. 171:2302-2311, 1989). This result has been interpreted as evidence that the hydrophilic segment is part of a mechanism that obligatorily couples translation to protein export. We have investigated the role of the hydrophilic segment of the Escherichia coli maltose-binding protein (MBP) signal peptide in the export and synthesis of MBP. Deletion of the entire hydrophilic segment from the MBP signal peptide resulted in a defect in MBP export, as well as a dramatic reduction in total MBP synthesis. Suppressor mutations that lie upstream of the malE coding region were isolated. These mutations do not affect MBP export but instead were shown to partially restore MBP synthesis by increasing the efficiency of MBP translational initiation. In addition, analysis of a series of substitution mutations in the second codon of certain malE alleles demonstrated that MBP export and synthesis can be independently affected by mutations in the hydrophilic segment. Finally, analysis of alterations in the hydrophilic segment of the ribose-binding protein signal peptide fused to the mature moiety of the MBP has revealed that the role of the hydrophilic segment in the export process can be functionally separated from any role in translation. Taken together, these results strongly suggest that the hydrophilic segment of the MBP signal peptide is not involved in a mechanism that couples MBP translation to export and argue against the presence of a mechanism that obligatorily couples translation to protein export in Escherichia coli.

Involvement of SecB, a chaperone, in the export of ribose-binding protein

Ribose-binding protein (RBP) is an exported protein of Escherichia coli that functions in the periplasm. The export of RBP involves the secretion machinery of the cell, consisting of a cytoplasmic protein, SecA, and the integral membrane translocation complex, including SecE and SecY. SecB protein, a chaperone known to mediate the export of some periplasmic and outer membrane proteins, was previously reported not to be involved in RBP translocation even though small amounts of in vitro complexes between SecB and RBP have been detected. In our investigation, it was shown that a dependence on SecB could be demonstrated under conditions in which export was compromised. Species of RBP which carry two mutations, one in the leader that blocks export and a second in the mature protein which partially suppresses the export defect, were shown to be affected by SecB for efficient translocation. Five different changes which suppress the effect of the signal sequence mutation -17LP are all located in the N domain of the tertiary structure of RBP. All species of RBP show similar interaction with SecB. Furthermore, a leaky mutation, -14AE, generated by site-specific mutagenesis causes reduced export in the absence of SecB. These results indicate that SecB can interact with RBP during secretion, although it is not absolutely required under normal circumstances.

Biochemical analysis of the biogenesis and function of the Escherichia coli export factor SecY

SecY is an integral plasma-membrane protein of Escherichia coli which is essential for the export of periplasmic and outer-membrane proteins containing cleavable signal sequences. We have synthesized SecY in vitro using an E. coli transcription/translation system. In the absence of membranes, SecY remained largely soluble but cosedimented on sucrose gradients with the membrane fraction when inside-out plasma-membrane vesicles (INV) had been added cotranslationally. Membrane association of SecY was unaffected if the endogenous SecY of the INV had been inactivated by either antibodies, a mutation or trypsin treatment. In contrast, inactivation of the INV SecY interfered with membrane targeting and, consequently, the processing of precursors to beta-lactamase and lambda receptor. When SecY-deprived INV were, however, first functionally reconstituted with in-vitro-synthesized SecY, targeting and translocation of the lambda receptor were partially restored. Thus, the assembly of SecY into INV in vitro leads to an active enzyme. In addition, we show that the prlA4 allele of the secY gene suppresses signal-sequence mutations of the lambda receptor in vitro. Collectively, our results demonstrate that SecY, while functioning as a membrane-located receptor for precursors of exported proteins, appears to be virtually independent of pre-existing SecY for its own membrane integration.

Export of maltose-binding protein species with altered charge distribution surrounding the signal peptide hydrophobic core in Escherichia coli cells harboring prl suppressor mutations

It is believed that one or more basic residues at the extreme amino terminus of precursor proteins and the lack of a net positive charge immediately following the signal peptide act as topological determinants that promote the insertion of the signal peptide hydrophobic core into the cytoplasmic membrane of Escherichia coli cells with the correct orientation required to initiate the protein export process. The export efficiency of precursor maltose-binding protein (pre-MBP) was found to decrease progressively as the net charge in the early mature region was increased systematically from 0 to +4. This inhibitory effect could be further exacerbated by reducing the net charge in the signal peptide to below 0. One such MBP species, designated MBP-3/+3 and having a net charge of -3 in the signal peptide and +3 in the early mature region, was totally export defective. Revertants in which MBP-3/+3 export was restored were found to harbor mutations in the prlA (secY) gene, encoding a key component of the E. coli protein export machinery. One such mutation, prlA666, was extensively characterized and shown to be a particularly strong suppressor of a variety of MBP export defects. Export of MBP-3/+3 and other MBP species with charge alterations in the early mature region also was substantially improved in E. coli cells harboring certain other prlA mutations originally selected as extragenic suppressors of signal sequence mutations altering the hydrophobic core of the LamB or MBP signal peptide. In addition, the enzymatic activity of alkaline phosphatase (PhoA) fused to a predicted cytoplasmic domain of an integral membrane protein (UhpT) increased significantly in cells harboring prlA666. These results suggest a role for PrlA/SecY in determining the orientation of signal peptides and possibly other membrane-spanning protein domains in the cytoplasmic membrane.

Molybdenum requirement for translocation of dimethyl sulfoxide reductase to the periplasmic space in a photodenitrifier, Rhodobacter sphaeroides f. sp. denitrificans

Translocation of dimethyl sulfoxide (DMSO) reductase to the periplasmic space was studied in vivo with a photodenitrifier, Rhodobacter sphaeroides f. sp. denitrificans, using immunoblotting analysis and radioactive labeling. A polypeptide with an apparent molecular mass about 2,000 Da higher than that of DMSO reductase accumulated during induction of the reductase with DMSO. An uncoupler, carbonyl cyanide-m-chlorophenylhydrazone, inhibited the processing of the polypeptide after cells had been radioactively pulse-labeled with [35S]methionine. These results indicated that the higher-molecular-mass polypeptide was the precursor form of DMSO reductase. The precursor form accumulated in either the cytoplasm or the membrane, whereas the mature form accumulated in the periplasmic space. The membrane-bound precursor was sensitive to proteinase K treatment from both the cytoplasmic and periplasmic sides of the membrane, indicating that the polypeptide binds to the membrane, exposing it to both the outer and inner surfaces of the cytoplasmic membrane. Processing of the precursor was hampered by removal of molybdate from the medium and was restored by its readdition. It was also inhibited by the addition of tungstate in the medium.

Novel prlA alleles defective in supporting staphylokinase processing in Escherichia coli

A class of prlA (secY) alleles of Escherichia coli (prlA4-1 and prlA401) which specifically block the export of staphylokinase has been identified (T. Iino and T. Sako, J. Biol. Chem. 263:19077-19082, 1988; T. Sako and T. Iino, J. Bacteriol. 170:5389-5391, 1988). To determine more precisely the region in PrlA (SecY) effective for the blockage of processing of the staphylokinase precursor, additional prlA mutants which failed to support processing of the staphylokinase precursor were isolated. Two of the five mutant alleles isolated (secY121 and secY161) complemented the temperature sensitivity of a secY24 strain and had no detectable effect on the processing of endogenous secretory proteins of E. coli. In addition, a staphylokinase mutant having glycine in place of serine at position 17 in its signal sequence relieved the detrimental effect of these mutations. All of these characteristics indicate that these two alleles resemble the prlA4-1 and prlA401 alleles. On the other hand, the remaining three mutant alleles (secY47, secY105, and secY112) had no significant PrlA activity. The mutations of secY121 and secY161 were mapped very close to those of prlA4-1 and prlA401 in the presumed transmembrane segment 7 of PrlA. These results indicate that transmembrane segment 7 of PrlA plays a crucial role in the recognition of the staphylokinase signal sequence.

SecB-independent export of Escherichia coli ribose-binding protein (RBP): some comparisons with export of maltose-binding protein (MBP) and studies with RBP-MBP hybrid proteins

The efficient export of the Escherichia coli maltose-binding protein (MBP) is known to be SecB dependent, whereas ribose-binding protein (RBP) export is SecB independent. When the MBP and RBP signal peptides were exchanged precisely at the signal peptidase processing sites, the resultant RBP-MBP and MBP-RBP hybrid proteins both were efficiently exported in SecB+ cells. However, only MBP-RBP was efficiently exported in SecB- cells; RBP-MBP exhibited a significant export defect, a finding that was consistent with previous proposals that SecB specifically interacts with the mature moiety of precursor MBP to promote export. The relatively slow, totally posttranslational export mode exhibited by certain mutant RBP and MBP-RBP species in SecB+ cells was not affected by the loss of SecB. In contrast, MBP and RBP-MBP species with similarly altered signal peptides were totally export defective in SecB- cells. Both export-defective MBP and RBP-MBP interfered with SecB-mediated protein export by depleting cells of functional SecB. In contrast, neither export-defective RBP nor MBP-RBP elicited such an interference effect. These and other data indicated that SecB is unable to interact with precursor RBP or that any interaction between these two proteins is considerably weaker than that of SecB with precursor MBP. In addition, no correlation could be established between a SecB requirement for export and PrlA-mediated suppression of signal peptide export defects. Finally, previous studies have established that wild-type MBP export can be accomplished cotranslationally, whereas wild-type RBP export is strictly a posttranslational process. In this study, cotranslational export was not detected for either MBP-RBP or RBP-MBP. This indicates that the export mode exhibited by a given precursor protein (cotranslational versus posttranslational) is determined by properties of both the signal peptide and the mature moiety.

The genetics of protein secretion in E. coli

Genetic studies have identified six genes whose products comprise the general protein secretion machinery of Escherichia coli. Insights from mutant analysis and the biochemical properties of the purified components allows the secretion pathway to be described in some detail. The picture emerging provides a useful paradigm for similar pathways in other organisms.

The sec and prl genes of Escherichia coli

Two general approaches have been used to define genetically the genes that encode components of the cellular protein export machinery. One of these strategies identifies mutations that confer a conditional-lethal, pleiotropic export defect (sec, secretion). The other identifies dominant suppressors of signal sequence mutations (prl, protein localization). Subsequent characterization reveals that in at least three cases, prlA/secY, prlD/secA, and prlG/secE, both types of mutations are found within the same structural gene. This convergence is satisfying and provides compelling evidence for direct involvement of these gene products in the export process.

Signal peptide mutants of Escherichia coli

Numerous secretory proteins of the Gram-negative bacteria E. coli are synthesized as precursor proteins which require an amino terminal extension known as the signal peptide for translocation across the cytoplasmic membrane. Following translocation, the signal peptide is proteolytically cleaved from the precursor to produce the mature exported protein. Signal peptides do not exhibit sequence homology, but invariably share common structural features: (1) The basic amino acid residues positioned at the amino terminus of the signal peptide are probably involved in precursor protein binding to the cytoplasmic membrane surface. (2) A stretch of 10 to 15 nonpolar amino acid residues form a hydrophobic core in the signal peptide which can insert into the lipid bilayer. (3) Small residues capable of beta-turn formation are located at the cleavage site in the carboxyl terminus of the signal peptide. (4) Charge characteristics of the amino terminal region of the mature protein can also influence precursor protein export. A variety of mutations in each of the structurally distinct regions of the signal peptide have been constructed via site-directed mutagenesis or isolated through genetic selection. These mutants have shed considerable light on the structure and function of the signal peptide and are reviewed here.

SecA protein: autoregulated initiator of secretory precursor protein translocation across the E. coli plasma membrane

Several classes of secA mutants have been isolated which reveal the essential role of this gene product for E. coli cell envelope protein secretion. SecA-dependent, in vitro protein translocation systems have been utilized to show that SecA is an essential, plasma membrane-associated, protein translocation factor, and that SecA's ATPase activity appears to play an essential but as yet undefined role in this process. Cell fractionation studies suggested that SecA protein is in a dynamic state within the cell, occurring in soluble, peripheral, and integral membraneous states. These data have been used to argue that SecA is likely to promote the initial insertion of secretory precursor proteins into the plasma membrane in a manner dependent on ATP hydrolysis. The protein secretion capability of the cell has been shown to translationally regulate secA expression with SecA protein serving as an autogenous repressor, although the exact mechanism and purpose of this regulation need to be defined further.

Export of the periplasmic maltose-binding protein of Escherichia coli

The export of the maltose-binding protein (MBP), the malE gene product, to the periplasm of Escherichia coli cells has been extensively investigated. The isolation of strains synthesizing MalE-LacZ hybrid proteins led to a novel genetic selection for mutants that accumulate export-defective precursor MBP (preMBP) in the cytoplasm. The export defects were subsequently shown to result from alterations in the MBP signal peptide. Analysis of these and a variety of mutants obtained in other ways has provided considerable insight into the requirements for an optimally functional MBP signal peptide. This structure has been shown to have multiple roles in the export process, including promoting entry of preMBP into the export pathway and initiating MBP translocation across the cytoplasmic membrane. The latter has been shown to be a late event relative to synthesis and can occur entirely posttranslationally, even many minutes after the completion of synthesis. Translocation requires that the MBP polypeptide exist in an export-competent conformation that most likely represents an unfolded state that is not inhibitory to membrane transit. The signal peptide contributes to the export competence of preMBP by slowing the rate at which the attached mature moiety folds. In addition, preMBP folding is thought to be further retarded by the binding of a cytoplasmic protein, SecB, to the mature moiety of nascent preMBP. In cells lacking this antifolding factor, MBP export represents a race between delivery of newly synthesized, export-competent preMBP to the translocation machinery in the cytoplasmic membrane and folding of preMBP into an export-incompetent conformation. SecB is one of three E. coli proteins classified as "molecular chaperones" by their ability to stabilize precursor proteins for membrane translocation.

Mutations that improve export of maltose-binding protein in SecB- cells of Escherichia coli

It previously has been proposed that the Escherichia coli SecB protein promotes the export of the maltose-binding protein (MBP) from the cytoplasm by preventing the folding of the precursor MBP (preMBP) into a translocation-incompetent conformation. The export of wild-type MBP is only partially blocked in SecB- cells. In contrast, the export of MBP16-1, an MBP species with a defective signal peptide, is totally dependent on SecB; hence, SecB- cells that synthesize MBP16-1 are unable to utilize maltose as a sole carbon source. The selection of Mal+ revertants primarily yielded mutants with alterations in the MBP16-1 signal peptide that permitted SecB-independent MBP export to the periplasm to various extents. Although each of these alterations increased the overall hydrophobicity of the signal peptide, it was not possible to strictly equate changes in hydrophobicity with the degree of SecB-independent export. Somewhat unexpectedly, two mutants were obtained in which MBP export in SecB- cells was markedly superior to that of the wild-type MBP. Although wild-type MBP is not cotranslationally translocated in SecB- cells, the two mutant proteins designated MBP172 and MBP173 exhibited significant cotranslational export in the absence of SecB. Thus, the role of SecB was partially supplanted by a signal peptide that promoted more rapid movement of MBP through the export pathway. When preMBP included the MBP172 signal peptide as well as an alteration in the mature moiety that slows folding, the SecB requirement for maximal MBP export efficiency was almost totally eliminated. These results provide additional strong support for the proposed antifolding role of SecB in MBP export.

New suppressors of signal-sequence mutations, prlG, are linked tightly to the secE gene of Escherichia coli

Analysis of more than 100 extragenic suppressors of the lamB14D signal-sequence mutation (changes Val in the hydrophobic core region at position 14 to Asp) has revealed alterations that appear to lie at prlA (secY) and secA (prlD), two loci known to be mutable to suppressor alleles, and a new suppressor termed prlG. One allele of the new suppressor class, prlG1, has been characterized in some detail. This suppressor counteracts, to some degree, the export defect conferred by a variety of signal-sequence mutations in two different genes, lamB and malE. Genetic analysis shows that the dominant suppressor mutations are linked tightly to, and probably allelic with, the gene secE. This result, coupled with data obtained with conditional-lethal alleles of secE, argues strongly that SecE is an important component of the cellular protein export machinery in Escherichia coli.

Analysis of mutational alterations in the hydrophilic segment of the maltose-binding protein signal peptide

Oligonucleotide-directed mutagenesis was employed to investigate the role of the hydrophilic segment of the Escherichia coli maltose-binding protein (MBP) signal peptide in the protein export process. The three basic residues residing at the amino terminus of the signal peptide were systematically substituted with neutral or acidic residues, decreasing the net charge in a stepwise fashion from +3 to -3. It was found that a net positive charge was not absolutely required for MBP export to the periplasm. However, export was most rapid and efficient when the signal peptide retained at least a single basic residue and a net charge of +1. The nature of the adjacent hydrophobic core helped to determine the effect of charge changes in the hydrophilic segment on MBP export, which suggested that these two regions of the signal peptide do not have totally distinct functions. Although the stepwise decrease in net charge of the signal peptide also resulted in a progressive decrease in the level of MBP synthesis, the data do not readily support a model in which MBP synthesis and export are obligately coupled events. The export defect resulting from alterations in the hydrophilic segment was partially suppressed in strains harboring certain prl alleles but not in strains harboring prlA alleles that are highly efficient suppressors of signal sequence mutations that alter the hydrophobic core.

Unity in function in the absence of consensus in sequence: role of leader peptides in export

Passage of proteins across membranes during export from their site of synthesis to their final destination is mediated by leader peptides that paradoxically exhibit a unity of function in spite of a diversity of sequence. These leader peptides act in at least two stages of the export process: at entry into the pathway and subsequently during translocation across the membrane. How selectivity is imposed on the system in the absence of a consensus among the sequences of leader peptides is the main issue discussed here.

Novel secA alleles improve export of maltose-binding protein synthesized with a defective signal peptide

Mutations previously designated prlD were described that suppressed malE signal sequence mutations and were located in the vicinity of the secA gene on the Escherichia coli chromosome. In this study, we demonstrated that four such independently isolated prlD mutations represented three unique single-base substitutions in secA, resulting in alterations at residues 111, 373, and 488 of the 901-residue SecA protein. Heretofore, the only mutations that had been described for secA were located early in the gene and resulted in a general protein export defect. Insertion mutations in the cloned gene X-secA operon that reduced or eliminated suppression by a prlD mutation also have been obtained. The properties of these suppressor and insertion mutations provide some insight into the role of SecA in the protein export process.

Role of the leader peptide of maltose-binding protein in two steps of the export process

During the process of export of maltose-binding protein to the periplasm of Escherichia coli, the leader peptide is involved in at least two steps. The presence of the leader portion of maltose-binding protein was shown to be necessary to mediate initial binding of the precursor to the membrane. However, the presence of a mutationally altered leader which does not sustain export in vivo was sufficient to allow this interaction. Thus, the defect in export which is manifested in vivo by this mutational substitution occurs at a step that follows membrane association, most likely the translocation step. Translocation occurs at discrete sites that are not uniformly distributed over the cytoplasmic membrane. A large proportion of the membrane involved in translocation has a higher density than that of bulk cytoplasmic membrane.

The antifolding activity of SecB promotes the export of the E. coli maltose-binding protein

Evidence is presented that the E. coli secB gene encodes a soluble protein that interacts with the mature region of the precursor maltose-binding protein (MBP), and promotes MBP export by preventing premature folding of the newly synthesized polypeptide into an export-incompetent form. The interaction of SecB with MBP was indicated by the finding that synthesis of various export-defective MBP species interfered with normal protein export by limiting SecB availability. The antifolding activity of SecB was demonstrated by the following: the defect in MBP export in SecB- cells was suppressed by mutational alterations affecting MBP folding; export of a mutant MBP that is accomplished in a strictly posttranslational mode was totally blocked in SecB- cells; and the rate of folding of wild-type MBP synthesized in vitro was found to be accelerated when SecB was absent and greatly retarded when excess SecB was present.

A progenitor of the outer membrane LamB trimer

During its localization to the outer membrane, LamB possesses distinctive biochemical properties as it passes through the cytoplasmic membrane. Because LamB entered this dynamic state with an attached signal sequence and leaves after cleavage, we call this export-related form of LamB the early-translocation form (et-LamB).

Modulation of folding pathways of exported proteins by the leader sequence

Leader peptides that function to direct export of proteins through membranes have some common features but exhibit a remarkable sequence diversity. Thus there is some question whether leader peptides exert their function through conventional stereospecific protein-protein interaction. Here it is shown that the leader peptides retarded the folding of precursor maltose-binding protein and ribose-binding protein from Escherichia coli. This kinetic effect may be crucial in allowing precursors to enter the export pathway.

Information transfer in biological systems: targeting of proteins to specific organelles or to the extracellular environment (secretion)

Orderliness is the salient characteristic of living systems. Cells are intolerant of disorder. They express this by rapidly eliminating or degrading out-of-place molecules. When cells are broken apart and their constituent organelles separated and analysed, the same types of macromolecules are always associated with the same subcellular structures. One finds, for example, the same proteins in mitochondria time after time, and these differ from the sets of proteins found in nuclei, secretory granules, or plasma membranes. The information necessary to target each protein to its appropriate intracellular destination is determined primarily by the gene for that protein. Encoded within the DNA structure of genes are signals that specify where each protein molecule belongs. Thus, it is the transfer of information from one macromolecule to another that maintains the integrity and orderliness of living cells.

Role of SecA and SecY in protein export as revealed by studies of TonA assembly into the outer membrane of Escherichia coli

The growth of secAts or secYts mutants at the restrictive temperature has been shown to inhibit the export of many outer membrane proteins. We report here that in two secAts strains the rate of incorporation of newly synthesized protein into both inner and outer membrane fractions decreased by about 70% at the restrictive temperature. The export of the outer membrane protein TonA was used as a model system in which to study the effects of SecA or SecY inactivation. pre-TonA that accumulated at the restrictive temperature was found to co-sediment with the outer membrane fraction. However, the precursor was sensitive to protease and did not float up a sucrose gradient with the membrane fractions. It was therefore concluded that pre-TonA was not integrated into the outer membrane fraction but probably accumulated in the cytoplasm. Studies on the rate of processing of pre-TonA, pulse-labelled at the restrictive temperature then chased at the permissive temperature, revealed differences between secA and secY mutants. In the secAts mutant the great majority of cytoplasmic pre-TonA was not apparently processed to the mature form, whereas in the secYts mutant significant amounts of precursors were rapidly chased into mature TonA, which appeared in the outer membrane. These results suggest that SecA and SecY may act sequentially in the export of proteins to the outer membrane. In particular these data indicate that SecA is required to maintain pre-TonA in a translocationally competent form prior to interaction with the SecY export site.

Export of unprocessed precursor maltose-binding protein to the periplasm of Escherichia coli cells

The Escherichia coli maltose-binding protein (MBP) R2 signal peptide is a truncated version of the wild-type structure that still facilitates very efficient export of MBP to the periplasm. Among single amino acid substitutions in the R2 signal peptide resulting in an export-defective precursor MBP (pMBP) were two that replaced residues in the consensus Ala-X-Ala sequence (residues -3 to -1) that immediately precedes the cleavage site. It was suggested that the functional hydrophobic core and signal peptidase recognition sequence of this signal peptide substantially overlap and that these two alterations affect both pMBP translocation and processing. In this study, the export of pMBP by the mutants, designated CC15 and CC17, with these two alterations was investigated further. The pMBP of mutant CC17 has an Arg substituted for Leu at the -2 position. It was found that CC17 cells exported only a very small amount of MBP, but that which was exported appeared to be correctly processed. This result was consistent with other studies that have concluded that virtually any amino acid can occupy the -2 position. For mutant CC15, which exhibits a fully Mal+ phenotype, an Asp is substituted for the Ala at the -3 position. CC15 cells were found to export large quantities of unprocessed, soluble pMBP to the periplasm, although such export was achieved in a relatively slow, posttranslational manner. This result was also consistent with other studies that suggested that charged residues are normally excluded from the -3 position of the cleavage site. Using in vitro oligonucleotide-directed mutagenesis, we constructed a new signal sequence mutant in which Asp was substituted for Arg at the -3 position of an otherwise wild-type MBP signal peptide. This alteration had no apparent effect on pMBP translocation across the cytoplasmic membrane, but processing by signal peptidase was inhibited. This pMBP species with its full-length hydrophobic core remained anchored to the membrane, where it could still participate in maltose uptake. The implications of these results for models of protein export are discussed.

Mutational alterations affecting the export competence of a truncated but fully functional maltose-binding protein signal peptide

The wild-type maltose-binding protein (MBP) signal peptide is 26 amino acids in length. A mutationally altered MBP signal peptide has been previously described that is missing one of the basic residues from the hydrophilic segment and seven residues from the hydrophobic core; however, it still facilitates MBP secretion to the periplasm at a rate and efficiency comparable to those of the wild-type structure. Thus, this truncated signal peptide (designated the R2 signal peptide) must retain all of the essential features required for proper export function. In this study, alterations were obtained in the R2 signal peptide that resulted in an export-defective MBP. For the first time, signal sequence mutations were obtained that resulted in the synthesis of a totally export-defective MBP. As was previously the case for the wild-type signal peptide, the introduction of either charged residues or helix-breaking proline residues adversely affected export function. Despite these similarities, the position of these alterations within the R2 signal peptide, their relative effects on MBP secretion and processing, and an analysis of the ability of various extragenic prl mutations to suppress the secretion defects provide additional insight into the minimal requirements for a functional MBP signal peptide.

Correlation of competence for export with lack of tertiary structure of the mature species: a study in vivo of maltose-binding protein in E. coli

Sensitivity to proteolytic degradation was used to monitor folding of polypeptides in vivo. A correlation between competence for export and lack of stable tertiary structure was established by comparing the kinetics of folding of mutated precursor maltose-binding protein that carries a defective leader peptide with the kinetics of folding of wild-type precursor that is competent for export. It is proposed that during export a kinetic competition exists between productive translocation and folding of precursor intracellularly into a stable conformation that is not compatible with transfer.

Effects of signal sequence mutations on the kinetics of alkaline phosphatase export to the periplasm in Escherichia coli

We isolated a collection of mutants defective in the export of alkaline phosphatase to the periplasm. Two classes of mutants were obtained: one class with lesions unlinked to the phoA gene and a second class harboring linked mutations. Among the former class, one mutant is cold sensitive for growth and may be defective in a component of the Escherichia coli secretory apparatus. Included in the latter class are 47 mutants which are characterized in detail in this report. To facilitate DNA sequence analysis of these mutants, we devised a convenient method that relies on homologous recombination in vivo to transfer phoA mutations from the bacterial chromosome directly onto the genome of a single-stranded M13 phage vector. DNA sequence analysis revealed that our collection of mutants comprises six unique mutations, all of which reside in the phoA signal sequence coding region and lend further support to the notion that the length of the hydrophobic core of the signal sequence is crucial for its function in protein export. Kinetic studies showed that in these mutants, the small fraction of alkaline phosphatase which succeeds in reaching a periplasmic location, despite a defective signal sequence, is translocated across the membrane in a slow, posttranslational fashion.