Microextraction of drugs

One-pot preparation of magnetic composite containing boronic acid groups and aminated multwalled carbon nanotubes for the speciation of Se(IV) and Se(VI) in water and milk samples by combination with chromatographic quantification

Speciation of Se(IV) and Se(VI) is essential due to their significant differences in reactivity, toxicity and bioavailability. Efficient extraction is the pivotal step in the quantification of inorganic selenium species. In this work, a new magnetic nano-composite (MNC) containing boronic acid group and aminated multwalled carbon nanotubes was facilely fabricated by means of one-pot hydrothermal strategy. The prepared MNC contained abundant functional groups and satisfactory magnetic saturation value. Combining with magnetic solid phase extraction (MSPE) format, the MNC displayed satisfactory capture performance towards the complex formed by the coordination of Se(IV) and o-phenylenediamine (OPA). Adsorption isotherm and adsorption kinetics were studied in detail to investigate the adsorption procedure of Se(IV)/OPA complex on MNC. Under the optimal preparation conditions of MNC and extraction parameters, the MNC/MSPE was connected with HPLC equipped with a diode array detector (DAD) to quantify trace Se(IV) and Se(VI) species in water and milk samples. Se(VI) was reduced to Se(IV) and then the total inorganic Se was quantified by the developed method. Subtraction method was used to measure the concentration of Se(VI). The achieved limits of detection were in the ranges of 0.0082-0.013 μg/L and 0.041-0.13 μg/kg for water and milk samples, respectively. Recoveries in actual samples spiked with different amounts of analytes varied from 81.0 % and 117 %, and the RSDs for repeatability varied from 1.0 % to 10 %. In comparison with existing studies based on MSPE, the established method presents some merits such as greenness in the preparation of magnetic adsorbent, rapid extraction procedure, low cost and satisfactory sensitivity in the speciation of inorganic Se species.

Fabrication and evaluation of a molecular-imprinted-polymer functionalized electrode for selective electric field-assisted solid-phase microextraction of phytohormones

Specific extraction and separation plays a pivotal role in the accurate quantification of trace phytohormones (PHs). However, due to their high polarity, specific capture of PHs is challenging. In this study, under the assistance of electric field, a molecular-imprinted-polymer functionalized electrode (MIP@ED) was in-situ prepared using 3-indoleacetic acid (IAA) as template and employed as the adsorbent of electric field-assisted solid-phase microextraction (EA-SPME) for specific capture of PHs. Results showed that the implementation of electric field during the preparation of MIP@ED and EA-SPME procedures improved the extraction selectivity, the selective factors towards IAA and its structural analogues increased from 2.09 to 2.45 to 2.88-3.51. Under the optimum conditions, the proposed MIP@ED/EA-SPME was combined with HPLC technique to monitor trace PHs in water and agricultural products. The achieved limits of detection were in the ranges of 0.0053-0.011 μg/L and 0.048-0.12 μg/kg for water and agricultural product, respectively. The established approach was successfully applied to quantify trace PHs in real samples, and the spiked recoveries varied from 84.0 % to 118 % with good repeatability (RSDs blow 10 %). The obtained results provided clear evidence that the developed approach employing the MIP@ED/EA-SPME technique demonstrated high sensitivity, good selectivity, satisfactory reproducibility and environmental friendliness in the quantification of trace PHs in complex samples. In addition, the current study supplied a new strategy to enhance the specific recognition performance of MIP-based SPME.

A review of electro-Fenton and ultrasound processes: towards a novel integrated technology for wastewater treatment

Nowadays, the presence of persistent dissolved pollutants in water has received increasing attention due to their toxic effects on living organisms. Considering the limitations of conventional wastewater treatment processes for the degradation of these compounds, advanced oxidation processes such as electro-Fenton and sono-chemical process, as well as their combination, appear as potentially effective options for the treatment of wastewater contaminated with bio-recalcitrant pollutants. In view of the importance of the development of processes using real effluents, this review aims to provide a comprehensive perspective of sono-electro-Fenton-related processes applied for real wastewater treatment. In the first section, the fundamentals and effectiveness of both homogeneous and heterogeneous electro-Fenton approaches for the treatment of real wastewater are presented. While the second part of this work describes the fundamentals of ultrasound-based processes, the last section focuses on the coupling of the two methods for real wastewater treatment and on the effect of the main operational parameters of the process. On the basis of the information presented, it is suggested that sono-electro-Fenton processes substantially increase the efficiency of the treatment as well as the biodegradability of the treated wastewater. The combined effect results from mass transfer improvement, electrode cleaning and activation, water electrolysis, and the electro-Fenton-induced production of hydroxyl radicals. The information presented in this work is expected to be useful for closing the gap between laboratory-scale assays and the development of novel wastewater technologies.

Applications of mass spectrometry in cosmetic analysis: An overview

Mass spectrometry (MS) is a crucial tool in cosmetic analysis. It is widely used for ingredient screening, quality control, risk monitoring, authenticity verification, and efficacy evaluation. However, due to the diversity of cosmetic products and the rapid development of MS-based analytical methods, the relevant literature needs a more systematic collation of information on this subject to unravel the true potential of MS in cosmetic analysis. Herein, an overview of the role of MS in cosmetic analysis over the past two decades is presented. The currently used sample preparation methods, ionization techniques, and types of mass analyzers are demonstrated in detail. In addition, a brief perspective on the future development of MS for cosmetic analysis is provided.

A magnetic porous carbon material derived from an MIL-101(Fe) complex for efficient magnetic solid phase extraction of fluoroquinolone antibiotics

Extraction and determination of trace hazardous components from complex matrices continue to attract public attention. In this work, magnetic porous carbon (MPC) was prepared for efficient magnetic solid phase extraction (MSPE) of fluoroquinolone (FQ) antibiotics in food and water samples. To prepare the MPC, an Fe-based metal-organic framework (MIL-101(Fe)) was grown on a network of graphene oxide and multi-walled carbon nanotubes through a hydrothermal method, and then a carbonization process under a nitrogen atmosphere was carried out to obtain the MPC with high specific surface area and good magnetism. Four target FQs including ciprofloxacin (CIP), enrofloxacin (ENO), lomefloxacin (LOM) and ofloxacin (OFX) were enriched using the as-prepared MPC and determined by coupled high-performance liquid chromatography. Under the optimal conditions, the established MSPE-HPLC-UV detection method exhibited a linear range of 0.5-800 μg L-1 and detection limits of 0.11-0.18 μg L-1 with relative standard deviations (RSDs) of 0.5-4.8%. When applied in the determination of the above four FQs in real samples such as lake water, milk and pork, good recoveries between 85.2 and 103.7% were obtained, and the RSDs were less than 4.8%. This work indicates that the MPC material can be a good adsorption material and has good application prospects in antibiotics enrichment and/or removal from complex samples.

One-pot fabrication of magnetic adsorbent based on polymeric ionic liquid/aminated carbon nanotubes composite for efficient capture of synthetic auxins in complex samples prior to chromatographic analysis

Efficient enrichment is a challenging and indispensable step in the quantification of polar synthetic auxins in complex samples. In the current study, a new magnetic adsorbent based on polymeric ionic liquid/aminated carbon nanotube composite was fabricated with a one-pot precipitation copolymerization strategy and employed as the extraction phase of magnetic solid phase extraction of synthetic auxins. Various characterization techniques were utilized to inspect the morphology, structure, magnetic property, and functional groups of the prepared adsorbent. Under the optimal conditions, the obtained adsorbent displayed satisfactory capture performance towards studied auxins through multiple interactions. Adsorption studies evidenced that the adsorption procedure of the developed method towards analytes was fit for the Freundlich adsorption model and pseudo-second-order kinetics. Combining with high-performance liquid chromatography, sensitive and reliable method for the identification and quantification of trace synthetic auxins in environmental water and fruit juice samples was developed. The obtained limits of detection for water and fruit juice samples located in the ranges of 0.0059-0.013 and 0.018-0.031 μg/L, respectively. Recoveries in actual samples with different fortified contents varied from 82.2% to 117%, with satisfactory reproducibility. The results will evidence that the introduced extraction technique is a useful alternative for the entrapment of trace synthetic auxins from complex samples.

Molecularly imprinted monolith-based portable in-tip microextraction device for field specific extraction of triazine herbicides in aqueous samples followed by chromatographic quantification

Field selective extraction is crucial for accurate monitoring of triazine herbicides (TAHs) in aqueous samples. For this purpose, using atrazine as template and 3-acrylamido phenylboronic acid as functional monomer which was quickly screened with calculation simulation technology, a new molecularly imprinted monolith-based adsorbent (MBA) was fabricated and utilized as the extraction phase of laboratory-made multichannel in-tip microextraction device (MIMD). A series of techniques were adopted to characterize the physical and chemical properties of the synthesized MBA. Under the optimized preparation conditions, the recognition factor and capture capacity of MBA towards atrazine were as high as 2.9 and 23.4 mg/g, respectively, and the enrichment factors towards TAHs located in the range of 276-359. The study about adsorption isotherm evidenced the adsorption of MBA towards atrazine was fit for Freundlich adsorption model. Under the beneficial extraction parameters, the introduced MBA/MIMD was utilized to on-site extract TAHs in a variety of aqueous samples prior to HPLC determination. High sensitivity (limit of detection: 0.25-0.64 ng/L), good precision (relative standard deviation: 1.4-9.5%) and satisfying recovery (81.0-113%) were achieved. Accuracy and reliability of the introduced method were inspected through confirmation experiments. Owing to the good results and outstanding merits, the established MBA/MIMD technique is appropriate for field sample preparation of TAHs and the developed method can be utilized to monitor TAHs residuals in various aqueous samples.

Preparation of monolith-based adsorbent containing abundant functional groups for field entrapment of nitrogen and sulfur containing aromatic compounds in environmental aqueous samples with portable multichannel in-tip microextraction device

Field sample preparation is important and interesting for analysis of nitrogen and sulfur containing aromatic compounds (N,S-CACs) in environmental aqueous samples. In this connection, a new functional groups-rich adsorbent based on porous monolith (ABM) was fabricated by in-situ copolymerization of allylaminocarbonylphenyl boronic acid/styrene and ethylene glycol dimethacrylate. The prepared ABM was employed as the extraction medium of homemade portable multichannel in-tip microextraction device (PMMD) for on-site entrapment of N,S-CACs in various waters. Because of the abundant functional groups, the obtained ABM/PMMD exhibited satisfactory capture capability towards studied N,S-CACs, and the enrichment factors varied from 454 to 491. Under the optimized fabrication conditions, adsorption and desorption parameters, the developed ABM/PMMD was used to field capture investigated N,S-CACs and followed by quantification with high performance liquid chromatography. The limits of detection were in the ranges of 0.00030-0.0016 µg/L. Recoveries with low, medium and high spiked contents located in the range of 82.1-118% with good repeatability (RSDs<9%). In addition, traditional laboratory sample pretreatment approach was employed to verify the reliability of the established method. Results well evidenced that the practicability of introduced ABM/PMMD in the field sample preparation of N,S-CACs in environmental waters.

Analyte recovery in LC-MS/MS bioanalysis: An old issue revisited

There are several challenges associated with LC-MS/MS bioanalytical method development and validation. Low and variable recovery of some analytes, especially the more hydrophobic ones, is often challenging. Analytes can be lost to various extents throughout the process of sample collection, storage, before, during, and/or after sample preparation and analysis. The calculation of overall extraction recovery can detect problems of low recovery during sample preparation but does not identify the source(s) of analyte losses. Low overall analyte recovery is the net result of losses that can happen for multiple reasons at all steps of sample preparation and analysis. Therefore, identifying the source(s) of analyte loss during sample preparation can help guide the optimization the bioanalysis conditions to minimize these losses. In this article we propose a practical protocol to systematically identify and quantify the sources of low analyte recovery. This allows the proper choice of strategies to optimize the relevant bioanalytical conditions to minimize analyte losses and improve overall recovery.

Efficient entrapment of inorganic Se species in water and beer samples with functional groups-rich monolith-based adsorbent

An efficient multiple fibers solid phase microextraction method based on porous monolith was established for Se(IV) and Se(VI) analysis. Poly (4-vinylphenylboronic acid/styrene-co-ethylene dimethacrylate/divinylbenzene) monolith was fabricated and employed as the extraction phase for efficient entrapment of Se(IV) complexed with o-phenylenediamine, followed by elution with a methanol/FA (99/1.0, v/v) mixture and quantification by high performance liquid chromatography with diode array detector. The Se(VI) species was measured by the difference between total inorganic Se and Se(IV) after pre-reduction. Different characterization techniques were employed to inspect the structure and morphology of prepared adsorbent. A series of key extraction factors were optimized so as to achieve the expected extraction performance. Under the optimized separation and capture parameters, the linear range and limit of detection for Se(IV) in water sample were 0.050-200 μg/L and 0.013 μg/L, respectively. For beer sample, the corresponding values were 0.010-300 μg/L and 0.032 μg/L. The developed microextraction approach was successfully utilized to detect trace Se(IV) and Se(VI) in environmental water and beer samples with satisfactory fortified recovery and repeatability. Results well reveal the attractive merits of the established method in the analysis of Se species, including simple preparation of adsorbent, convenient extraction procedure, good sensitivity, high cost-effectiveness and eco-friendliness. This article is protected by copyright. All rights reserved.

Development of monolith/aminated carbon nanotubes composite-based solid-phase microextraction of phenoxycarboxylic acids herbicides in water and soil samples

In this study, a new adsorbent based on monolith/aminated carbon nanotubes composite was facilely prepared and employed as the extraction phase of multiple monolithic fibers solid-phase microextraction for the capture of phenoxycarboxylic acids herbicides. The adsorbent was fabricated by mingling aminated carbon nanotubes in the poly (allylthiourea-co-ethylene glycol dimethacrylate) monolith. Various techniques were employed to characterize the morphology, structure, and pore size of the prepared adsorbent. The proposed microextraction method displayed satisfactory capture performance towards studied analytes through multi-interactions such as hydrogen-bonding, hydrophobic and π-π interactions. Under the optimized conditions, a sensitive and reliable method to quantify trace analytes in water and soil samples was developed. The limits of detection were in the ranges of 0.13-0.25 μg/L and 0.20-0.61 μg/kg for water and soil samples, respectively. The practicality of the introduced method was demonstrated by applying it to monitor the contents of studied analytes in environmental water and soil samples. Satisfactory fortified recoveries (76.4-119%) and reproducibility were obtained. The achieved results well demonstrated that the suggested microextraction technique can efficiently extract phenoxycarboxylic acids and the developed method exhibits a promising potential for reliable and sensitive quantification of trace analytes in complex samples.

One-Pot Strategy as a Green and Rapid Method to Fabricate Magnetic Molecularly Imprinted Nanoparticles for Selective Capture of Sulfonylurea Herbicides

Magnetic solid-phase extraction (MSPE) based on molecularly imprinted nanoparticles (MINs) has attracted wide attention in sample pretreatment because it combines the merits of high selectivity and quick extraction procedures. However, laborious, time and solvent-consuming steps were involved in the synthesis of magnetic imprinted particles in existing approaches. To circumvent this dilemma, a green and rapid "one-pot" strategy was proposed to prepare MINs. Halosulfuron-methyl (HSM) was selected as a template molecule, and Gaussian 09 simulation software was employed to screen the 2,4,6-trivinylboroxin pyridine complex (TBP) as a functional monomer. Subsequently, the fabrication was simply conducted using a hydrothermal approach by mixing self-assembly solution of TBP-HSM, Fe³⁺, Fe²⁺, dimethyl sulfoxide, and azobisisobutyronitrile in one-pot with a total reaction time of 3.0 h. Various characterized results well evidenced the successful imprint of HSM and the resultant HSM-MINs presented satisfying superparamagnetism and saturation magnetism. Under the optimized parameters, the obtained HSM-MINs displayed good recognition capability and selectivity toward HSM (recognition coefficient was 2.60), as well as a satisfactory saturation adsorption capacity (1781 μg/g). The quantification of sulfonylurea herbicides at trace levels in environmental water and soil samples was selected as a paradigm to demonstrate the practicality and reliability of HSM-MINs/MSPE. The present study provides a convenient, reliable, and green approach for fabricating a magnetic molecular-imprinting adsorbent for MSPE.

Development of magnetism-assisted in-tube solid phase microextraction of phenolic acids in fruit juices prior to high-performance liquid chromatography quantification

Magnetism-assisted in-tube solid phase microextraction based on porous monolith mingled with Fe₃ O₄ nanoparticles was developed for capture of phenolic acids in fruit juices. First, poly (1-allyl-3-methylimidazolium bis [(trifluoro methyl) sulfonyl] imide-co-ethylene dimethacrylate) monolith embedded with Fe₃ O₄ nanoparticles was facile fabrication in a capillary and employed as microextraction column. Subsequently, a magnetic coil adopted to produce variable magnetic fields during extraction stage was twined on the microextraction column. The analytes contents in eluant were quantified by high performance liquid chromatogram with diode array detector. Various parameters affecting the extraction performance were inspected and optimized in detail. Results revealed that the exertion of magnetic fields in adsorption and desorption steps enhanced the extraction efficiencies of analytes from 44.9-64.0% to 78.6-87.1%. Under the optimal extraction factors, the limits of detection were between 0.012 and 0.061 μg/L, relative standard deviations for precision in terms of intra- and inter-day assay variability ranged from 1.9 to 9.8%. The introduced approach was successfully applied to simultaneously quantify the contents of five analytes in real fruit juices with satisfying fortified recoveries (80.1-116%). The obtained results well demonstrate the promising potential of the developed method in the highly sensitive quantification of trace phenolic acids in complex samples.

Monolith/aminated graphene oxide composite-based electric field-assisted solid phase microextraction for efficient capture of phenoxycarboxylic acids herbicides in environmental waters

Efficient capture of strongly polar, ionizable and trace phenoxycarboxylic acids herbicides (PCAHs) from aqueous samples is essential and challenging for environmental monitoring. In the present work, electric field-assisted solid-phase microextraction (EFA-SPME) based on monolith/aminated graphene oxide composite was developed for the first time to efficiently extract trace PCAHs prior to HPLC-tandem mass spectrometry (HPLC-MS/MS) quantification. First, poly (1-allyl-3-methylimidazole difluoromethanesulfonylamide salt-co-divinylbenzene/ethylene dimethacrylate) monolith/aminated graphene oxide composite (MAC) was prepared on the surface of stainless steel wire and employed as the extraction phase of SPME. After that, the MAC-based fiber and a stainless steel wire were connected to a DC power supply that allowed the implement of variable electric fields during adsorption and desorption processes. Various key factors influencing the extraction performance were inspected in detailed. Results well evidenced that the exertion of electric fields improved the enrichment performance, accelerated the trap and release procedures. The proposed MAC/EFA-SPME-HPLC-MS/MS method achieved wide linear ranges (0.005-50.0 μg/L), low limits of detection (0.54-1.3 ng/L) and good precision (2.7-7.0%) for the quantification of PCAHs. The related extraction mechanism was deduced. Additional, the current approach was successfully applied to monitor studied PCAHs at trace contents in environment waters, and the accuracy was confirmed by confirmatory experiments.

Solid-phase microextraction for assessment of plasma protein binding, a complement to rapid equilibrium dialysis

Aim: Determination of plasma protein binding (PPB) is considered vital for better understanding of pharmacokinetic and pharmacodynamic activities of drugs due to the role of free concentration in pharmacological response. Methodology & results: Solid-phase microextraction (SPME) was investigated for measurement of PPB from biological matrices and compared with a gold standard approach (rapid equilibrium dialysis [RED]). Discussion & conclusion: SPME-derived values of PPB correlated well with literature values, and those determined by RED. Respectively, average protein binding across three concentrations by RED and SPME was 33.1 and 31.7% for metoprolol, 89.0 and 86.6% for propranolol and 99.2 and 99.0% for diclofenac. This study generates some evidence for SPME as an alternative platform for the determination of PPB.

Easy fabrication of aminated graphene oxide functionalized magnetic nanocomposite for efficient preconcentration of phenolic acids prior to HPLC determination: Application in tea-derived wines

In this study, aminated graphene oxide functionalized magnetic nanocomposite (AGMN) was facilely synthesized by one-pot hydrothermal approach and acted as the extraction phase of magnetic solid phase extraction (MSPE) of phenolic acids (PAs). Characterization results revealed that the AGMN possessed satisfying saturation magnetism and abundant functional groups. Under the optimal extraction parameters, the proposed AGMN/MSPE presented high enrichment capability to PAs. Sensitive and dependable method for measurement of PAs in wine was proposed by the combination of AGMN/MSPE and HPLC/DAD. Limits of detection and limits of quantification were in the ranges of 0.031-0.23 μg/L and 0.10-0.78 μg/L, respectively, and the RSDs for approach precision varied from 1.8% to 8.9%. Recoveries at low, medium and high fortified levels varied from 84.6% to 116%. The suggested method was used to quantify investigated PAs in ten kinds of Tieguanyin tea-derived wines, and found the contents of PAs in wines were related to the quality of tea-leaves and alcohol content.

Metal organic framework-801 based magnetic solid-phase extraction and its application in analysis of preterm labor treatment drugs

A novel magnetic solid-phase extraction (MSPE) method based on metal organic framework-801 (MOF-801) modified magnetic nanoparticles (noted as PEI-MNPs@MOF-801) was successfully prepared for the extraction of preterm labor treatment drugs (including indometacin, acemetacin and sulindac) from human plasma sample. MOF-801, a new kind of porous coordination polymer composed of Zr⁴⁺ and fumaric acid, was modified on the surface of synthesized polyethyleneimine magnetic nanoparticles (PEI-MNPs) through amidation reaction. The obtained PEI-MNPs@MOF-801 was characterized with Fourier-transformed infrared spectroscopy, X-ray photoelectron spectroscopy, X-ray diffraction and transmission electron microscopy. A MSPE-HPLC-UV method was developed by coupling PEI-MNPs@MOF-801 with HPLC system. Several parameters that affect the extraction efficiency including acetonitrile content, NaCl content, extraction time and sample volume were investigated. Under optimum conditions, the proposed MSPE-HPLC-UV method showed high extraction efficiency (enrichment factors between 96-118), good linearity with R ≥ 0.9987, excellent reproducibility (RSD ≤ 4.30 %) and low limits of detection in the range of 0.03-0.05 ng/mL. This method was also successfully applied to the extraction of indometacin, acemetacin and sulindac in human plasma samples and good recoveries were obtained.

Assessment of commercial porous polyethylene frit for extraction of polycyclic aromatic hydrocarbons from water

Exploring commercial and inexpensive sorbents for extraction of organic pollutants is still an active area of research. Ultrahigh molecular weight polyethylene sieve plate (UMPESP) is a commercially available, low-cost, and porous frit, which has been widely used in solid-phase extraction cartridges to fix the filling materials. In this work, UMPESP was investigated for the extraction of polycyclic aromatic hydrocarbons (PAHs) from water samples. The desorption and sorption efficiencies of UMPESP were first evaluated and compared with two previously reported sorbents, low-density polyethylene plastic pellet (LDPEP) and silicone rod (SR). The comparative results showed that quantitative desorption of analytes from UMPESP, which could be easily achieved with 2 × 1.5 mL n-hexane, was more effective than that of LDPEP (>6 × 1.5 mL n-hexane) and comparable to that of SR. Additionally, shorter equilibrium time was rendered by UMPESP (shaking for 120 min) compared with SR (>480 min), due to the porous structure and larger surface area of the former. Different parameters that affect the extraction efficiency, including organic modifier, ionic strength, and pH value, were then studied. The optimized method coupled with gas chromatography-mass spectrometry afforded good linearity in a concentration range of 10-5000 ng L^-1 (except acenaphthene in the range of 25-5000 ng L^-1) with coefficients of determination ranging from 0.9957 to 0.9995 and relative standard deviations below 13.8%. The limits of detection and quantification were 0.04-3.35 ng L^-1 and 0.13-11.16 ng L^-1, respectively. Finally, the method was successfully applied to determine PAHs in real water samples, and the results showed no statistically significant difference with the concentrations derived from liquid-liquid extraction.

Development of an easy and rapid analytical method for the extraction and preconcentration of chloroquine phosphate from human biofluids prior to GC-MS analysis

A vortex assisted spraying based fine droplet formation liquid phase microextraction (VA-SFDF-LPME) method was developed to determine chloroquine phosphate at trace levels in human serum, urine and saliva samples by gas chromatography–mass spectrometry (GC–MS) with single quadrupole mass analyzer. In the first part, several liquid phase microextraction (LPME) and magnetic solid phase extraction (MSPE) methods were compared to each other in order to observe their extraction ability for the analyte. VA-SFDF-LPME method was selected as an efficient and easy extraction method due to its higher extraction efficiency. Optimization studies were carried out for the parameters such as extraction solvent type, sodium hydroxide volume/concentration, sample volume, spraying number and mixing type/period. Tukey's method based on post hoc test was applied to all experimental data for the selection of optimum values. Optimum extraction parameters were found to be 12 mL initial sample volume, two sprays of dichloromethane, 0.75 mL of 60 g/kg sodium hydroxide and 15 s vortex. Under the optimum conditions, limit of detection and quantification (LOD and LOQ) were calculated as 2.8 and 9.2 μg/kg, respectively. Detection power of the GC–MS system was increased by approximately 317 folds with the developed extraction/preconcentration method. The applicability and accuracy of the proposed method was evaluated by spiking experiments and percent recovery results for human urine, serum and saliva samples were found in the range of 90.9% and 114.0% with low standard deviation values (1.9–9.4).

Microextraction Techniques with Deep Eutectic Solvents

In this review, the ever-increasing use of deep eutectic solvents (DES) in microextraction techniques will be discussed, focusing on the reasons needed to replace conventional extraction techniques with greener approaches that follow the principles of green analytical chemistry. The properties of DES will be discussed, pinpointing their exceptional performance and analytical parameters, justifying their current extensive scientific interest. Finally, a variety of applications for commonly used microextraction techniques will be reported.

In-tube solid-phase microextraction: Current trends and future perspectives

In-tube solid-phase microextraction (IT-SPME) was developed about 24 years ago as an effective sample preparation technique using an open tubular capillary column as an extraction device. IT-SPME is useful for micro-concentration, automated sample cleanup, and rapid online analysis, and can be used to determine the analytes in complex matrices simple sample processing methods such as direct sample injection or filtration. IT-SPME is usually performed in combination with high-performance liquid chromatography using an online column switching technology, in which the entire process from sample preparation to separation to data analysis is automated using the autosampler. Furthermore, IT-SPME minimizes the use of harmful organic solvents and is simple and labor-saving, making it a sustainable and environmentally friendly green analytical technique. Various operating systems and new sorbent materials have been developed to improve its extraction efficiency by, for example, enhancing its sorption capacity and selectivity. In addition, IT-SPME methods have been widely applied in environmental analysis, food analysis and bioanalysis. This review describes the present state of IT-SPME technology and summarizes its current trends and future perspectives, including method development and strategies to improve extraction efficiency.

A green analytical method for the analysis of polycyclic aromatic hydrocarbons in oral fluids from crack smokers

Aim: Develop and validate a method of solid-phase microextraction (SPME) and liquid chromatography to investigate three major polycyclic aromatic hydrocarbons (PAHs) in oral fluid. Results/Methodology: The extraction phase was exposed to 1.5 ml of diluted oral fluid under stirring at 1000 rpm for 60 min, at 70°C. Then, it was immersed in 200 μl of acetonitrile for 10 min at 25°C for desorption of the analytes. Linearity, absolute recovery, and inter- and intra-assay relative standard deviations and relative errors were 50-300 ng.ml^-1, ≥24% and ≤15% for all analytes, respectively. A full factorial design was used to SPME optimization. Discussion/Conclusion: The method is suitable for the exploratory analysis of some PAHs in the oral fluid of crack smokers.

On-site sample preparation of trace aromatic amines in environmental waters with monolith-based multichannel in-tip microextraction apparatus followed by HPLC determination

A novel on-site preparation strategy for the determination of trace aromatic amines (AAs) in environmental waters was developed in the present study. To extract AAs effectively, 4-vinylbenzoic acid was copolymerized with ethylene dimethacrylate (ED)/divinylbenzene (DVB) in a pipette tip to obtain a new monolith-based adsorbent (MBA). The MBAs were employed as the extraction phases of home-made multichannel in-tip microextraction apparatus (ITMA) which was used to perform field sample preparation of AAs in different water samples followed by HPLC/DAD analysis. Due to the abundant functional groups, the prepared MBA displayed satisfying extraction performance for studied AAs. Under the optimized conditions, limits of detection varied from 2.1 to 26 ng/L with good coefficients of determination and precision. The recoveries for real water samples with different fortified concentrations were in the range of 78.1-119%, and the RSD values varied from 0.85 to 11%. In addition, the results achieved with the introduced method were well comparable to that obtained with conventional laboratory sample pretreatment process. Compared with existing approaches, the proposed method exhibits some merits such as s high throughput, good sensitivity and eco-friendliness. Most of important, the MBA/ITMA for on-site preparation avoids the storage and transportation of large volumes of waters, and guarantees the analytical accuracy of studied AAs.

Headspace Solid-Phase Microextraction: Validation of the Method and Determination of Allyl Isothiocyanate Persistence in Cowpea Beans

Essential oils are widely recognized as an efficient and safe alternative for controlling pests in foods. However, a few studies have determined the persistence of these compounds in stored grains. The present study optimized and validated a fast and effective method for extraction and quantification of allyl isothiocyanate (AITC-the main component of mustard essential oil) residue in cowpea beans. It also investigated the persistence of this substance in the grains. The proposed method employs headspace solid-phase microextraction (HS-SPME) and gas chromatography with a flame ionization detector (GC/FID). For optimizing it, a central composite design (CCD) was used, where the best conditions for the extraction of the AITC were achieved using 15 min fiber exposure at 30 °C. The performance of the method was assessed by studying selectivity, linearity, limits of detection (LOD) and quantification (LOQ), precision, and accuracy. The LOD and LOQ for AITC were 0.11 and 0.33 μg kg^-1, respectively. The determination coefficient (R ²) was above 0.99. The relative recovery rate ranged from 108.2 to 114.8%, with an interday coefficient of variation below 9%. After 36 h, no residue was detected in the samples, demonstrating that the AITC has low persistence and can be safely used as a bioinsecticide for grains.

Sol-gel fabrication and performance evaluation of graphene-based hydrophobic solid-phase microextraction fibers for multi-residue analysis of pesticides in water samples

Widespread use of organophosphorus pesticides poses serious environmental threats, and hence calls for effective analysis methods for these classes of compounds. In this study, a lab-made graphene-based solid-phase microextraction (SPME) fiber was fabricated by the sol-gel method and combined with a gas chromatography-flame photometry detector (GC-FPD) to realize the detection of trace OPPs in water samples. Compared to the commercial fiber coatings, the new sol-gel graphene fiber coatings showed advantages of good durability and solvent resistance, which were attributed to the hydrophobic and antibacterial properties of the functionalized graphene and 3-(trimethoxysilyl)propyldimethyloctadecylammonium chloride (QAS). A headspace SPME method in combination with a GC-FPD was established to evaluate the performance of the novel fibers. The proposed method showed a good linear relationship for the eight OPPs (R²≥ 0.9957) in the concentration range of 1 to 1000 μg L^-1, with limits of quantification of 0.11-3.37 μg L^-1 and limits of detection of 0.03-1.01 μg L^-1. Furthermore, the developed method also exhibited good recoveries for the analysis of OPPs both in rainwater and lake water, which demonstrates that this method is an alternative choice for multi-residue analysis of OPPs, and it has the potential for broader applications in the future.

Facile fabrication of functional groups-rich sorbent for the efficient enrichment of aromatic N- and S-containing compounds in environmental waters

Extraction strategy is designed for the pretreatment of low contents of aromatic N- and S-containing compounds (ANSCs) in environmental waters prior to chromatographic analysis. To enrich studied ANSCs effectively, poly (9-vinylanthracene/4-vinylphenylboronic acid-co-ethylene dimethacrylate/divinylbenzene) polymeric monolithic sorbent were facilely fabricated using the one-step free radical polymerization. Various technologies were employed to investigate the structure and morphology of the resultant monolith. Combining with solid-phase microextraction format, the sorbent exhibited satisfying concentrated performance for ANSCs through multiply interactions under the optimized conditions. After desorption with eluent, the retained analytes were analyzed by HPLC. Results showed that the extraction efficiencies ranged from 51.6 to 93.2%. The linear ranges and limits of detection were 0.01-150 μg/L and 0.63-2.64 ng/L, respectively. Furthermore, the precisions were all below 10%. The introduced approach was productively practiced on three real water samples for simultaneous quantification of studied ANSCs, and the fortified recoveries ranged from 81.5 to 118%. All the results well evidenced that prepared sorbent can enrich ANSCs effectively and the introduced method is reliable alternative for routine analysis of ANSCs in environmental waters.

Salt-effect enhanced hollow-fiber liquid-phase microextraction of glutathione in human saliva followed by miniaturized capillary electrophoresis with amperometric detection

A hollow-fiber liquid-phase microextraction (HF-LPME) method was established for purification and enrichment of glutathione (GSH) in human saliva followed by a miniaturized capillary electrophoresis with amperometric detection system (mini-CE-AD). Based on regulating isoelectric point and increasing salt effect to modify donor phase, HF-LPME could provide high enrichment efficiency for GSH up to 471 times, and the extract was directly injected for mini-CE-AD analysis. The salt-effect enhanced HF-LPME/mini-CE-AD method has been successfully applied to saliva analysis, and acceptable LOD (0.46 ng/mL, S/N = 3) and recoveries (92.7-101.3%) could be obtained in saliva matrix. The sample pretreatment of this developed method was simple and required no derivatization, providing a potential alternative for non-invasive fluid analysis using portable instrument.

Preparation of highly fluorinated and boron-rich adsorbent for magnetic solid-phase extraction of fluoroquinolones in water and milk samples

Effective extraction is an indispensable procedure for the sensitive analysis of fluoroquinolones (FQs) in complex samples. According to the molecular properties of FQs, a new highly fluorinated and boron-rich adsorbent (FBA) was synthesized and employed as the extraction phase of magnetic solid-phase extraction (MSPE). Results revealed that the prepared FBA displayed satisfactory extraction capability for FQs through fluorophilic and B-N coordination interactions. Besides, the synthesized FBA also exhibited strong magnetic responsiveness and good life-span. Under the most favorable conditions, the FBA/MSPE was combined with high-performance liquid chromatography with diode array detection (HPLC-DAD) to sensitively quantify trace levels of FQs in environmental water and milk samples. The developed approach showed good linearity within the studied concentration range, satisfactory precision and low limits of detection (0.0049-0.016 μg/L for water sample and 0.010-0.046 μg/kg for milk sample). In the analysis of target FQs in real samples, the recoveries of different fortified concentrations were in the ranges of 80.1-120% and 78.9-119% for water and milk samples, respectively. The relative standard deviations for reproducibility were all below 11%. The results well evidence that the introduced FBA/MSPE is a promising extraction technology for FQs, and the established FBA/MSPE-HPLC/DAD approach is suitable to measure low concentrations of FQs in water and milk samples.

Metal-organic framework-monolith composite-based in-tube solid phase microextraction on-line coupled to high-performance liquid chromatography-fluorescence detection for the highly sensitive monitoring of fluoroquinolones in water and food samples

In this study, a new metal-organic framework-monolith composite for in-tube solid phase microextraction phase (IT-SPME) of fluoroquinolones (FQs) was prepared. 4-Vinylbenzoic acid was copolymerized with ethylenedimethacrylate in a fused silica capillary to form porous monolith. After that, zeolitic imidazolate frameworks (ZIF-8) were synthesized in situ within the pores and the surface of the monolith by controlled layer-by-layer self-assembly of Zn²⁺ and imidazole. The introduction of ZIF-8 enhanced the surface area of monolith composite, and thus, improving the extraction performance of IT-SPME for FQs obviously. Under the optimized conditions, a highly sensitive method for the monitoring of FQs residue in water and honey samples was developed by the on-line combination of IT-SPME with high-performance liquid chromatography with fluorescence detection (HPLC-FLD). The limits of detection (S/N = 3) for the targeted FQs in water and honey samples were as low as 0.14-0.61 ng/L and 0.39-1.1 ng/L, respectively. The relative standard deviations (RSDs) for intra-day and inter-day assay variability were less than 10% in all samples. The established on-line IT-SPME-HPLC-FLD was successfully used to detect ultra-trace FQs in environmental water and honey samples. Recoveries at different spiked concentrations ranged from 80.1% to 119% and 80.2-117% for water and honey samples, respectively, with satisfactory reproducibility. Compared to up-to-date reported methods, the proposed approach exhibits some features such as high sensitivity, convenience, partial automation, low consumptions of sample and solvent.