Electropolymerization of pyrrole on titanium substrates for the future development of new biocompatible surfaces

Vapor-Phase Synthesis of Molecularly Imprinted Polymers on Nanostructured Materials at Room-Temperature

Molecularly imprinted polymers (MIPs) have recently emerged as robust and versatile artificial receptors. MIP synthesis is carried out in liquid phase and optimized on planar surfaces. Application of MIPs to nanostructured materials is challenging due to diffusion-limited transport of monomers within the nanomaterial recesses, especially when the aspect ratio is >10. Here, the room temperature vapor-phase synthesis of MIPs in nanostructured materials is reported. The vapor phase synthesis leverages a >1000-fold increase in the diffusion coefficient of monomers in vapor phase, compared to liquid phase, to relax diffusion-limited transport and enable the controlled synthesis of MIPs also in nanostructures with high aspect ratio. As proof-of-concept application, pyrrole is used as the functional monomer thanks to its large exploitation in MIP preparation; nanostructured porous silicon oxide (PSiO2 ) is chosen to assess the vapor-phase deposition of PPy-based MIP in nanostructures with aspect ratio >100; human hemoglobin (HHb) is selected as the target molecule for the preparation of a MIP-based PSiO2 optical sensor. High sensitivity and selectivity, low detection limit, high stability and reusability are achieved in label-free optical detection of HHb, also in human plasma and artificial serum. The proposed vapor-phase synthesis of MIPs is immediately transferable to other nanomaterials, transducers, and proteins.

Highly conductive and tough polyacrylamide/sodium alginate hydrogel with uniformly distributed polypyrrole nanospheres for wearable strain sensors

Conductive hydrogels have attracted widespread attention because of their integrated characteristics of being stretchable, deformable, adhesive, self-healable, and conductive. Herein, we report a highly conductive and tough double-network hydrogel based on a double cross-linked polyacrylamide (PAAM) and sodium alginate (SA) network with conducting polypyrrole nanospheres (PPy NSs) uniformly distributed in the network (PAAM-SA-PPy NSs). SA was employed as a soft template for synthesis of PPy NSs and distribution of PPy NSs uniformly in the hydrogel matrix to construct SA-PPy conductive network. The PAAM-SA-PPy NS hydrogel exhibited both high electrical conductivity (6.44 S/m) and excellent mechanical properties (tensile strength of 560 kPa at 870 %), as along as high toughness, high biocompatibility, good self-healing and adhesion properties. The assembled strain sensors showed high sensitivity and a wide sensing range (a gauge factor of 1.89 for 0-400 % strain and 4.53 for 400-800 % strain, respectively), as well as fast responsiveness and reliable stability. When used as a wearable strain sensor, it was able to monitor a series of physical signals from human large-scale joint motions and subtle muscle movements. This work provides a new strategy for the development of electronic skins and flexible strain sensors.

Electrically Induced Underwater Superaerophilicity/Superaerophobicity Switching on Polypyrrole-Coated Mesh Films for Selective Bubble Permeation

Recently, materials with controllable superwettability have attracted much attention. However, almost all studies focused on controlling wetting of water and oil; research on underwater gas bubble wetting control is still rare. Herein, we report a mesh film prepared by coating polypyrrole (PPy) film on Ti mesh. Briefly, the film mesh is underwater superaerophilic when PPy is doped with perfluorooctanesulfonate ions (PFOS^- ), and becomes underwater superaerophobic as the PFOS^- are removed. The transition of the wettability can be triggered by electrical stimuli, which is attributed to the cooperative effect between the rough structure and chemical components variation. The controllable wettability allows adjustable bubble permeation. It can be envisioned that the film will provide potential applications in the future, such as underwater bubble capture/release and microfluidic devices.

Polyethylene Glycol Pulsed Electrodeposition for the Development of Antifouling Coatings on Titanium

Titanium dental implants are widely used for the replacement of damaged teeth. However, bacterial infections at the interface between soft tissues and the implant can impair the functionality of the device and lead to failure. In this work, the preparation of an antifouling coating of polyethylene glycol (PEG) on titanium by pulsed electrodeposition was investigated in order to reduce Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli) adhesion while maintaining human fibroblast adhesion. Different pulsed conditions were prepared and characterized by contact angle, Focused Ion Beam (FIB), Fourier Transformed Infrared Spectroscopy in the Attenuated Total Reflectance mode (ATR-FTIR), and X-ray photoelectron spectroscopy (XPS). XPS tested fibronectin adsorption. S. aureus, E. coli and human fibroblast adhesion was tested in vitro in both mono and co-culture settings. Physicochemical characterization proved useful for confirming the presence of PEG and evaluating the efficiency of the coating methods. Fibronectin adsorption decreased for all of the conditions, but an adsorption of 20% when compared to titanium was maintained, which supported fibroblast adhesion on the surfaces. In contrast, S. aureus and E. coli attachment on coated surfaces decreased up to 90% vs. control titanium. Co-culture studies with the two bacterial strains and human fibroblasts showed the efficacy of the coatings to allow for eukaryotic cell adhesion, even in the presence of pre-adhered bacteria.

Electrochemical Strategies for Titanium Implant Polymeric Coatings: The Why and How

Among the several strategies aimed at polymeric coatings deposition on titanium (Ti) and its alloys, metals commonly used in orthopaedic and orthodontic prosthesis, electrochemical approaches have gained growing interest, thanks to their high versatility. In this review, we will present two main electrochemical procedures to obtain stable, low cost and reliable polymeric coatings: electrochemical polymerization and electrophoretic deposition. Distinction should be made between bioinert films—having mainly the purpose of hindering corrosive processes of the underlying metal—and bioactive films—capable of improving biological compatibility, avoiding inflammation or implant-associated infection processes, and so forth. However, very often, these two objectives have been pursued and achieved contemporaneously. Indeed, the ideal coating is a system in which anti-corrosion, anti-infection and osseointegration can be obtained simultaneously. The ultimate goal of all these coatings is the better control of properties and processes occurring at the titanium interface, with a special emphasis on the cell-coating interactions. Finally, advantages and drawbacks of these electrochemical strategies have been highlighted in the concluding remarks.

Recent Advances on Polypyrrole Electroactuators

Featuring controllable electrochemomechanical deformation and excellent biocompatibility, polypyrrole electroactuators used as artificial muscles play a vital role in the design of biomimetic robots and biomedical devices. In the past decade, tremendous efforts have been devoted to their optimization on electroactivity, electrochemical stability, and actuation speed, thereby gradually filling the gaps between desired capabilities and practical performances. This review summarizes recent advances on polypyrrole electroactuators, with particular emphases on novel counterions and conformation-reinforcing skeletons. Progress and challenges are comparatively demonstrated and critically analyzed, to enlighten future developments of advanced electroactuators based on polypyrrole and other conducting polymers.

Tantalum-coated pedicle screws enhance implant integration

Because titanium alloy (Ti) has the natural advantage of a low elastic modulus, it has become the most commonly used material for the manufacturing of pedicle screws. However, its poor shear strength and osteogenic ability are undesirable properties. The superior osteoinductivity demonstrated by tantalum (Ta) in oral and maxillofacial surgery and joint surgery leads us to assume that the tantalum-coated pedicle screws may have better osteogenic properties and bone anchoring strength. To verify this hypothesis, MC3T3-E1 cells and human mesenchymal stem cells (hBMSCs) were seeded on the surface of Ta and Ti disks to compare the effects of two different metals on cell adhesion, proliferation, and differentiation. At the same time, we observed the inhibitory effect of Ta on osteoclasts. As an in vivo study, conventional Ti pedicle screws and Ta-coated screws were implanted in bilateral pedicles of Bama pigs. The results showed that compared to titanium, tantalum promoted greater cell adhesion and proliferation and improved the level of hBMSC mineralization, and Ta-coated screws exerted an inhibitory effect on osteoclasts. More importantly, we found that the effect of tantalum on osteogenic differentiation was mediated through the Wnt/β-catenin and TGF-β/smad signaling pathways. Ta-coated screws significantly promoted trabecular bone growth compared with Ti as evidenced by micro-CT, histology and biomechanical examination. Our study clearly indicated that tantalum was a superior promoter of osteogenesis and proved that tantalum coating is an effective improvement for titanium alloy implants.

On-chip metal/polypyrrole quasi-reference electrodes for robust ISFET operation

To operate an ion-sensitive field-effect transistor (ISFETs) it is necessary to set the electrolyte potential using a reference electrode. Conventional reference electrodes are bulky, fragile, and too big for applications where the electrolyte volume is small. Several researchers have proposed tackling this issue using a solid-state planar micro-reference electrode or a reference field-effect transistor. However, these approaches are limited by poor robustness, high cost, or complex integration with other microfabrication processes. Here we report a simple method to create robust on-chip quasi-reference electrodes by electrodepositing polypyrrole on micro-patterned metal leads. The electrodes were fabricated through the polymerization of pyrrole on patterned metals with a cyclic voltammetry process. Open circuit potential measurements were performed to characterize the polypyrrole electrode performance, demonstrating good stability (±1 mV), low drift (∼1 mV h(-1)), and reduced pH response (5 mV per pH). In addition, the polypyrrole deposition was repeated in microelectrodes made of different metals to test compatibility with standard complementary metal-oxide-semiconductor (CMOS) processes. Our results suggest that nickel, a metal commonly used in semiconductor foundries for silicide formation, is a good candidate to form the polypyrrole quasi-reference electrodes. Finally, the polypyrrole microelectrodes were used to operate foundry fabricated ISFETs. These experiments demonstrated that transistors biased with polypyrrole electrodes have pH sensitivity and resolution comparable to ones that are biased with standard reference electrodes. Therefore, the simple fabrication, high compatibility, and robust electrical performance make polypyrrole an ideal choice for the fabrication of outstanding microreference electrodes that enable robust and sensitive operation of multiple ISFET sensors on a chip.

Electrical stimulation of human mesenchymal stem cells on biomineralized conducting polymers enhances their differentiation towards osteogenic outcomes

Tissue scaffolds allowing the behaviour of the cells that reside on them to be controlled are of particular interest for tissue engineering.

Versatile method for the synthesis of porous nanostructured thin films of conducting polymers and their composites

Porous nanostructured FeCl₃ was used as template and oxidant simultaneously to synthesize nanostructured films of conducting polymers and their composites.

Amine-functionalized polypyrrole: Inherently cell adhesive conducting polymer

Electrically conducting polymers (CPs) have been recognized as novel biomaterials that can electrically communicate with biological systems. For their tissue engineering applications, CPs have been modified to promote cell adhesion for improved interactions between biomaterials and cells/tissues. Conventional approaches to improve cell adhesion involve the surface modification of CPs with biomolecules, such as physical adsorption of cell adhesive proteins and polycationic polymers, or their chemical immobilization; however, these approaches require additional multiple modification steps with expensive biomolecules. In this study, as a simple and effective alternative to such additional biomolecule treatment, we synthesized amine-functionalized polypyrrole (APPy) that inherently presents cell adhesion-supporting positive charges under physiological conditions. The synthesized APPy provides electrical activity in a moderate range and a hydrophilic surface compared to regular polypyrrole (PPy) homopolymers. Under both serum and serum-free conditions, APPy exhibited superior attachment of human dermal fibroblasts and Schwann cells compared to PPy homopolymer controls. Moreover, Schwann cell adhesion onto the APPy copolymer was at least similar to that on poly-l-lysine treated PPy controls. Our results indicate that amine-functionalized CP substrates will be useful to achieve good cell adhesion and potentially electrically stimulate various cells. In addition, amine functionality present on CPs can further serve as a novel and flexible platform to chemically tether various bioactive molecules, such as growth factors, antibodies, and chemical drugs.

Research and development of metals for medical devices based on clinical needs

The current research and development of metallic materials used for medicine and dentistry is reviewed. First, the general properties required of metals used in medical devices are summarized, followed by the needs for the development of α + β type Ti alloys with large elongation and β type Ti alloys with a low Young's modulus. In addition, nickel-free Ni-Ti alloys and austenitic stainless steels are described. As new topics, we review metals that are bioabsorbable and compatible with magnetic resonance imaging. Surface treatment and modification techniques to improve biofunctions and biocompatibility are categorized, and the related problems are presented at the end of this review. The metal surface may be biofunctionalized by various techniques, such as dry and wet processes. These techniques make it possible to apply metals to scaffolds in tissue engineering.

Adsorption behavior of human plasma fibronectin on hydrophobic and hydrophilic Ti6Al4V substrata and its influence on bacterial adhesion and detachment

Biomaterial implant-associated infections, a common cause of medical devices' failure, are initiated by bacterial adhesion to an adsorbed protein layer on the implant material surface. In this study, the influence of protein surface orientation on bacterial adhesion has been examined using three clinically relevant bacterial strains known to express specific binding sites for human plasma fibronectin (HFN). HFN was allowed to adsorb on hydrophobic Ti6Al4V and physically modified hydrophilic Ti6Al4V substrata. Ellipsometric data reveal that the characteristics of the adsorbed protein layers primary depend on solid surface tension and the initial protein concentration in solution. In particular, HFN molecules adopt a more extended conformation on hydrophobic than hydrophilic surfaces, an effect that is more pronounced at low than at high initial protein concentrations. Moreover, the extended conformation of the protein molecules on these surfaces likely facilitates the exposure of specific sites for adhesion, resulting in the higher bacterial-cell attachment observed regardless of the strain considered. Contact angle measurements and the analysis of the number of remaining adhering cells after being subjected to external forces further suggest that both specific and nonspecific (hydrophobic) interactions play an important role on bacterial attachment. This study is the first one to evaluate the influence of surface hydrophobicity on protein adsorption and its subsequent effect on bacterial adhesion using a material whose hydrophobicity was not modified using chemical treatments that potentially led to surface properties changes other than hydrophobicity.

Nerve growth factor-immobilized electrically conducting fibrous scaffolds for potential use in neural engineering applications

Engineered scaffolds simultaneously exhibiting multiple cues are highly desirable for neural tissue regeneration. To this end, we developed a neural tissue engineering scaffold that displays submicrometer-scale features, electrical conductivity, and neurotrophic activity. Specifically, electrospun poly(lactic acid-co-glycolic acid) (PLGA) nanofibers were layered with a nanometer thick coating of electrically conducting polypyrrole (PPy) presenting carboxylic groups. Then, nerve growth factor (NGF) was chemically immobilized onto the surface of the fibers. These NGF-immobilized PPy-coated PLGA (NGF-PPyPLGA) fibers supported PC12 neurite formation ( 28.0±3.0% of the cells) and neurite outgrowth (14.2 μm median length), which were comparable to that observed with NGF (50 ng/mL) in culture medium ( 29.0±1.3%, 14.4 μm). Electrical stimulation of PC12 cells on NGF-immobilized PPyPLGA fiber scaffolds was found to further improve neurite development and neurite length by 18% and 17%, respectively, compared to unstimulated cells on the NGF-immobilized fibers. Hence, submicrometer-scale fibrous scaffolds that incorporate neurotrophic and electroconducting activities may serve as promising neural tissue engineering scaffolds such as nerve guidance conduits.

A comprehensive review of techniques for biofunctionalization of titanium

A number of surface modification techniques using immobilization of biofunctional molecules of Titanium (Ti) for dental implants as well as surface properties of Ti and Ti alloys have been developed. The method using passive surface oxide film on titanium takes advantage of the fact that the surface film on Ti consists mainly of amorphous or low-crystalline and non-stoichiometric TiO(2). In another method, the reconstruction of passive films, calcium phosphate naturally forms on Ti and its alloys, which is characteristic of Ti. A third method uses the surface active hydroxyl group. The oxide surface immediately reacts with water molecules and hydroxyl groups are formed. The hydroxyl groups dissociate in aqueous solutions and show acidic and basic properties. Several additional methods are also possible, including surface modification techniques, immobilization of poly(ethylene glycol), and immobilization of biomolecules such as bone morphogenetic protein, peptide, collagen, hydrogel, and gelatin.

Ciprofloxacin-modified electrosynthesized hydrogel coatings to prevent titanium-implant-associated infections

New promising and versatile materials for the development of in situ sustained release systems consisting of thin films of either poly(2-hydroxyethyl methacrylate) or a copolymer based on poly(ethylene-glycol diacrylate) and acrylic acid were investigated. These polymers were electrosynthesized directly on titanium substrates and loaded with ciprofloxacin (CIP) either during or after the synthesis step. X-ray photoelectron spectroscopy was used to check the CIP entrapment efficiency as well as its surface availability in the hydrogel films, while high-performance liquid chromatography was employed to assess the release property of the films and to quantify the amount of CIP released by the coatings. These systems were then tested to evaluate the in vitro inhibition of methicillin-resistant Staphylococcus aureus (MRSA) growth. Moreover, a model equation is proposed which can easily correlate the diameter of the inhibition haloes with the amount of antibiotic released. Finally, MG63 human osteoblast-like cells were employed to assess the biocompatibility of CIP-modified hydrogel coatings.

Applications of conducting polymers and their issues in biomedical engineering

Conducting polymers (CPs) have attracted much interest as suitable matrices of biomolecules and have been used to enhance the stability, speed and sensitivity of various biomedical devices. Moreover, CPs are inexpensive, easy to synthesize and versatile because their properties can be readily modulated by (i) surface functionalization techniques and (ii) the use of a wide range of molecules that can be entrapped or used as dopants. This paper discusses the various surface modifications of the CP that can be employed in order to impart physico-chemical and biological guidance cues that promote cell adhesion/proliferation at the polymer-tissue interface. This ability of the CP to induce various cellular mechanisms widens its applications in medical fields and bioengineering.

Development and characterization of rhVEGF-loaded poly(HEMA-MOEP) coatings electrosynthesized on titanium to enhance bone mineralization and angiogenesis

Osteointegration of titanium implants could be significantly improved by coatings capable of promoting both mineralization and angiogenesis. In the present study, a copolymeric hydrogel coating, poly-2-hydroxyethyl methacrylate-2-methacryloyloxyethyl phosphate (P(HEMA-MOEP)), devised to enhance calcification in body fluids and to entrap and release growth factors, was electrosynthesized for the first time on titanium substrates and compared to poly-2-hydroxyethyl methacrylate (PHEMA), used as a blank reference. Polymers exhibiting negatively charged groups, such as P(HEMA-MOEP), help to enhance implant calcification. The electrosynthesized coatings were characterized by X-ray photoelectron spectroscopy and atomic force microscopy. MG-63 human osteoblast-like cell behaviour on the coated specimens was investigated by scanning electron microscopy, MTT viability test and osteocalcin mRNA detection. The ability of negatively charged phosphate groups to promote hydroxyapatite-like calcium phosphate deposition on the implants was explored by immersing them in simulated body fluid. Similar biological responses were observed in both coated specimens, while calcium-phosphorus globules were detected only on P(HEMA-MOEP) surfaces pretreated with alkaline solution. Testing of the ability of P(HEMA-MOEP) hydrogels to entrap and release human recombinant vascular endothelial growth factor, to tackle the problem of insufficient oxygen and nutrient delivery, suggested that P(HEMA-MOEP)-coated titanium prostheses could represent a multifunctional material suitable for bone restoration applications.

Polypyrrole-coated electrospun PLGA nanofibers for neural tissue applications

Electrospinning is a promising approach to create nanofiber structures that are capable of supporting adhesion and guiding extension of neurons for nerve regeneration. Concurrently, electrical stimulation of neurons in the absence of topographical features also has been shown to guide axonal extension. Therefore, the goal of this study was to form electrically conductive nanofiber structures and to examine the combined effect of nanofiber structures and electrical stimulation. Conductive meshes were produced by growing polypyrrole (PPy) on random and aligned electrospun poly(lactic-co-glycolic acid) (PLGA) nanofibers, as confirmed by scanning electron micrographs and X-ray photon spectroscopy. PPy-PLGA electrospun meshes supported the growth and differentiation of rat pheochromocytoma 12 (PC12) cells and hippocampal neurons comparable to non-coated PLGA control meshes, suggesting that PPy-PLGA may be suitable as conductive nanofibers for neuronal tissue scaffolds. Electrical stimulation studies showed that PC12 cells, stimulated with a potential of 10 mV/cm on PPy-PLGA scaffolds, exhibited 40-50% longer neurites and 40-90% more neurite formation compared to unstimulated cells on the same scaffolds. In addition, stimulation of the cells on aligned PPy-PLGA fibers resulted in longer neurites and more neurite-bearing cells than stimulation on random PPy-PLGA fibers, suggesting a combined effect of electrical stimulation and topographical guidance and the potential use of these scaffolds for neural tissue applications.

Electrosynthesis of hydrogel films on metal substrates for the development of coatings with tunable drug delivery performances

Novel polyacrylates-based hydrogel thin films were prepared by electrochemical polymerization, a new method to obtain hydrogels directly onto metal substrates. 2-Hydroxy-ethyl-methacrylate (HEMA), a macromer poly (ethylene-glycol diacrylate) (PEGDA) and PEGDA copolymerized with acrylic acid (AA) were used to obtain hydrogels. The electrosynthesized coatings were characterized by X-ray photoelectron spectroscopy, to assess their surface chemical composition, and by water content determination measurements, to characterize the swelling behavior. In particular, quartz crystal microbalance with dissipation monitoring was used to evaluate the pH-dependency of the swelling for AA-containing hydrogels. Moreover, a model protein (bovine serum albumin) and a model drug (caffeine) were entrapped within the hydrogel coatings during electrosynthesis, to examine the release performances and mechanisms of the electrosynthesized hydrogels. It was observed that all the examined polymers showed significant release properties and, in particular, AA-containing hydrogel films confirmed a strong pH-dependence as expected. These coatings seem to be promising in orthopedic field for in situ drug delivery applications.

Starch-assisted synthesis of polypyrrole nanowires by a simple electrochemical approach

Starch, one of the most commonly used polysaccharides, has been adopted for the first time as morphology-directing agent to the electrochemical synthesis of polypyrrole (PPy) nanowires on various electrodes.

A new titanium biofunctionalized interface based on poly(pyrrole-3-acetic acid) coating: proliferation of osteoblast-like cells and future perspectives

In recent years, many procedures based on surface modification have been suggested to improve the biocompatibility and biofunctionality of orthopedic titanium-based implants. In this contest, the development of a new titanium-based biomaterial that could be covalently modified with biologically active molecules (i.e., RGD-peptides, growth factors, etc.) able to improve osteoblasts response was investigated. The strategy followed was based on a preliminary coating of the implant material by an adherent thin polymer film to which bioactive molecules could be grafted exploiting the polymer surface chemical reactivity. In this work, we focused our attention on pyrrole-3-acetic acid (Py-3-acetic), a pyrrole with carboxylic acid substituent, whose electrosynthesis and characterization on titanium substrates were already accomplished and whose potentialities in the design of new biocompatible surfaces are well evident. As first step, the biocompatibility of the electrochemically grown PPy-3-acetic films was investigated performing in vitro tests (adhesion and proliferation) with mouse bone marrow cells. Successively, the availability and reactivity of surface carboxylic groups were tested through the grafting of an aminoacidic residue to PPy-3-acetic films.

Carboxylic acid-functionalized conductive polypyrrole as a bioactive platform for cell adhesion

Electroactive polymers such as polypyrrole (PPy) are highly attractive for a number of biomedical applications, including their use as coatings for electrodes or neural probes and as scaffolds to induce tissue regeneration. Surface modification of these materials with biological moieties is desired to enhance the biomaterial-tissue interface and to promote desired tissue responses. Here, we present the synthesis and physicochemical characterization of poly(1-(2-carboxyethyl)pyrrole) (PPyCOOH), a PPy derivative that contains a chemical group that can be easily modified with biological moieties at the N-position of the polymer backbone. FTIR, XPS, and fluorescence microscopy were used to demonstrate the successful incorporation of carboxylic acid (-COOH) functionality into PPy materials, and a four-point probe analysis was used to demonstrate electrical conductivity in the semiconductor range. Human umbilical vascular endothelial cells (HUVECs) cultured on PPyCOOH films surface-modified with the cell-adhesive Arg-Gly-Asp (RGD) motif demonstrated improved attachment and spreading. Thus, PPyCOOH could be useful in developing PPy composites that contain a variety of biological molecules as bioactive conducting platforms for specific biomedical purposes.

Fast In Vivo Microextraction: A New Tool for Clinical Analysis

Background: We sought to develop a technique with the potential to partly replace current methods of analysis based on blood draws. To achieve this goal, we developed an in vivo microextraction technique that is faster than conventional methods, interferes minimally with the investigated system, minimizes errors associated with sample preparation, and limits exposure to hazardous biological samples.

Methods: Solid-phase microextraction devices based on hydrophilic polypyrrole and polyethylene glycol coatings were used for direct extraction of drugs from the flowing blood of beagle dogs, over a period of 8 h. The drugs extracted on the probes were subsequently quantified by liquid chromatography coupled to tandem mass spectrometry. Two calibration strategies—external and standard on the fiber—were used to correlate the amount extracted with the in vivo concentration.

Results: Diazepam and its metabolites were successfully monitored over the course of a pharmacokinetic study, repeated 3 times on 3 beagles. The fast microextraction technique was validated by comparison with conventional plasma analysis, and a correlation factor of 0.99 was obtained. In addition to total concentrations, the method was useful for determining free drug concentrations.

Conclusions: The proposed technique has several advantages and is suitable for fast clinical analyses. This approach could be used not only for drugs, but for any other endogenous or exogenous compounds.

Organic thin-film transistors as transducers for (bio) analytical applications

The use of organic thin-film transistors (OTFTs) in sensorics is relatively new. Although electronic noses, electronic textiles and disposable biochemical sensors appear to be viable applications for this type of devices, the benefits of the technology still have to be proven. This paper aims to provide a review of the recent advances in the area of chemically sensitive field-effect devices based on organic thin-film transistors (OTFTs), with emphasis on bioanalytical applications. Detection principle, device configuration, materials and fabrication processes as well as sensor performances will be discussed, with emphasis on the potential for implementation in real applications and the important challenges ahead.