Production of lipospheres as carriers for bioactive compounds

Vitamin D loaded into lipid nanoparticles shows insulinotropic effect in INS-1E cells

Increasing evidence suggests a beneficial role of vitamin D (VitD) supplementation in addressing the widespread VitD deficiency, but currently used VitD3 formulations present low bioavailability and toxicity constrains. Hence, poly(L-lactide-co-glycolide) (PLGA) nanoparticles (NPs), solid-lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) were investigated to circumvent these issues. PLGA NPs prepared by emulsification or nanoprecipitation presented 74 or 200 nm, and association efficiency (AE) of 68 % and 17 %, respectively, and a rapid burst release of VitD3. Both SLN and NLCs presented higher polydispersity and larger NPs size, around 500 nm, which could be reduced to around 200 nm by use of hot high-pressure homogenization in the case of NLCs. VitD3 was efficiently loaded in both SLNs and NLCs with an AE of 82 and 99 %, respectively. While SLNs showed burst release, NLCs allowed a sustained release of VitD3 for nearly one month. Furthermore, NLCs showed high stability with maintenance of VitD3 loading for up to one month at 4 °C and no cytotoxic effects on INS-1E cells up to 72 h. A trending increase (around 30 %) on glucose-dependent insulin secretion was observed by INS-1E cells pre-treated with VitD3. This effect was consistently observed in the free form and after loading on NLCs. Overall, this work contributed to further elucidation on a suitable delivery system for VitD3 and on the effects of this metabolite on β cell function.

An Insight into Advances in Developing Nanotechnology Based Therapeutics, Drug Delivery, Diagnostics and Vaccines: Multidimensional Applications in Tuberculosis Disease Management

Tuberculosis (TB), one of the deadliest contagious diseases, is a major concern worldwide. Long-term treatment, a high pill burden, limited compliance, and strict administration schedules are all variables that contribute to the development of MDR and XDR tuberculosis patients. The rise of multidrug-resistant strains and a scarcity of anti-TB medications pose a threat to TB control in the future. As a result, a strong and effective system is required to overcome technological limitations and improve the efficacy of therapeutic medications, which is still a huge problem for pharmacological technology. Nanotechnology offers an interesting opportunity for accurate identification of mycobacterial strains and improved medication treatment possibilities for tuberculosis. Nano medicine in tuberculosis is an emerging research field that provides the possibility of efficient medication delivery using nanoparticles and a decrease in drug dosages and adverse effects to boost patient compliance with therapy and recovery. Due to their fascinating characteristics, this strategy is useful in overcoming the abnormalities associated with traditional therapy and leads to some optimization of the therapeutic impact. It also decreases the dosing frequency and eliminates the problem of low compliance. To develop modern diagnosis techniques, upgraded treatment, and possible prevention of tuberculosis, the nanoparticle-based tests have demonstrated considerable advances. The literature search was conducted using Scopus, PubMed, Google Scholar, and Elsevier databases only. This article examines the possibility of employing nanotechnology for TB diagnosis, nanotechnology-based medicine delivery systems, and prevention for the successful elimination of TB illnesses.

Cell Membrane Biomimetic Nanoparticles with Potential in Treatment of Alzheimer's Disease

Alzheimer's disease (AD) is to blame for about 60% of dementia cases worldwide. The blood-brain barrier (BBB) prevents many medications for AD from having clinical therapeutic effects that can be used to treat the affected area. Many researchers have turned their attention to cell membrane biomimetic nanoparticles (NPs) to solve this situation. Among them, NPs can extend the half-life of drugs in the body as the "core" of the wrapped drug, and the cell membrane acts as the "shell" of the wrapped NPs to functionalize the NPs, which can further improve the delivery efficiency of nano-drug delivery systems. Researchers are learning that cell membrane biomimetic NPs can circumvent the BBB's restriction, prevent harm to the body's immune system, extend the period that NPs spend in circulation, and have good biocompatibility and cytotoxicity, which increases efficacy of drug release. This review summarized the detailed production process and features of core NPs and further introduced the extraction methods of cell membrane and fusion methods of cell membrane biomimetic NPs. In addition, the targeting peptides for modifying biomimetic NPs to target the BBB to demonstrate the broad prospects of cell membrane biomimetic NPs drug delivery systems were summarized.

Solid Lipid Nanoparticles Based on Monosubstituted Pillar[5]arenes: Chemoselective Synthesis of Macrocycles and Their Supramolecular Self-Assembly

Novel monosubstituted pillar[5]arenes with one or two terminal carboxyl groups were synthesized by the reaction of succinic anhydride with pillar[5]arene derivative containing a diethylenetriamine function. The ability for non-covalent self-assembly in chloroform, dimethyl sulfoxide, as well as in tetrahydrofuran-water system was studied. The ability of the synthesized macrocycles to form different types of associates depending on the substituent nature was established. The formation of stable particles with average diameter of 192 nm in chloroform and of 439 nm in DMSO was shown for pillar[5]arene containing two carboxyl fragments. Solid lipid nanoparticles (SLN) based on monosubstituted pillar[5]arenes were synthesized by nanoprecipitation in THF-water system. Minor changes in the structure of the macrocycle substituent can dramatically influence the stability and shape of SLN (spherical and rod-like structures) accordingly to DLS and TEM. The presence of two carboxyl groups in the macrocycle substituent leads to the formation of stable spherical SLN with an average hydrodynamic diameter of 364-454 nm. Rod-like structures are formed by pillar[5]arene containing one carboxyl fragment, which diameter is about of 50-80 nm and length of 700-1000 nm. The synthesized stable SLN open up great prospects for their use as drug storage systems.

Leveraging the Exploratory and Predictive Capabilities of Design of Experiments in Development of Intraarticular Injection of Imatinib Mesylate Containing Lipospheres

An intraarticular, liposphere-based, formulation of Imatinib mesylate for weekly administration was developed. Lipospheres were prepared using double emulsion technique using dierucoyl phosphatidylcholine, 1,2-dipalmitoyl-sn-glycero-3-phospho-rac-(1-glycerol) sodium salt), cholesterol, and tricaprylin as lipid phase in dichloromethane in a four-step process. Primary emulsion, formed using a high-pressure homogenizer, was diluted using a secondary aqueous phase in an Inline mixer to form the liposomal dispersion. Nitrogen flushing was done to remove dichloromethane, and the dispersion was finally centrifuged and adjusted for potency. The amount of cholesterol and triglyceride was taken as formulation variables, and speed of homogenization was used as a process variable in the Box-Behnken design while particle size, % drug entrapment, and drug release at the end of 4 h and 5 days were taken as response variables. Multivariate data analysis grouped the variables in two latent variable sets, one based on the speed and the other on the composition of lipospheres. Multiple linear regression analysis was used to generate mathematical model for each response. Constraints were put on the values of responses, as per the requirements of the final product, and the "freedom to operate" design space was located using an overlay plot. The center point batch sufficed all the set criteria, and Monte Carlo simulations on the factor variables indicated a defect rate of 5%. The center point batch was characterized for viscosity, osmolality, pH, drug release, and lipocrit value. The dispersion was charged in a prefilled syringe and studied for stability. The product was found to be stable at 2-8°C over a period of 6 months.

Synchronizing In Silico, In Vitro, and In Vivo Studies for the Successful Nose to Brain Delivery of an Anticancer Molecule

Sesamol is a sesame seed constituent with reported activity against many types of cancer. In this work, two types of nanocarriers, solid lipid nanoparticles (SLNs) and polymeric nanoparticles (PNs), were exploited to improve sesamol efficiency against the glioma cancer cell line. The ability of the proposed systems for efficient brain targeting intranasally was also inspected. By the aid of two docking programs, the virtual loading pattern inside these nanocarriers was matched to the real experimental results. Interactions involved in sesamol-carrier binding were also assessed, followed by a discussion of how different scoring functions account for these interactions. The study is an extension of the computer-assisted drug formulation design series, which represents a promising initiative for an upcoming industrial innovation. The results proved the power of combined in silico tools in predicting members with the highest sesamol payload suitable for delivering a sufficient dose to the brain. Among nine carriers, glyceryl monostearate (GMS) and polycaprolactone (PCL) scored the highest sesamol payload practically and computationally. The EE % was 66.09 ± 0.92 and 61.73 ± 0.47 corresponding to a ΔG (binding energy) of -8.85 ± 0.16 and -5.04 ± 0.11, respectively. Dynamic light scattering evidenced the formation of 215.1 ± 7.2 nm and 414.25 ± 1.6 nm nanoparticles, respectively. Both formulations demonstrated an efficient cytotoxic effect and brain-targeting ability compared to the sesamol solution. This was evidenced by low IC₅₀ (38.50 ± 10.37 μM and 27.81 ± 2.76 μM) and high drug targeting efficiency (7.64 ± 1.89-fold and 13.72 ± 4.1-fold) and direct transport percentages (86.12 ± 3.89 and 92.198 ± 2.09) for GMS-SLNs and PCL-PNs, respectively. The results also showed how different formulations, having different compositions and characteristics, could affect the cytotoxic and targeting ability.

Formulation and assessment of hydroxyzine HCL solid lipid nanoparticles by dual emulsification technique for transdermal delivery

Hydroxyzine HCL (HHCL) is an antihistamine, used for the treatment of allergic skin conditions. The purpose of this study was to achieve a dual phase drug delivery rate across the intact skin, to enhance HHCL permeation through the stratum corneum, to assess the peripheral H₁-antihistaminic activity and the extent to which HHCL was systemically absorbed from transdermal gel loaded with solid lipid nanoparticles (SLNs), as well as to avoid its extreme bitterness. According to 2³ factorial design, eight formulations of HHCL-SLNs were prepared by the double emulsification method. Lipid type (X_A), surfactant concentration (X_B) and co-surfactant concentration (X_C) were the independent variables. All formulations were characterized for their surface morphology, particle size, entrapment efficiency and in-vitro drug release study. The optimized formula that provides greater desirability was then incorporated into the transdermal gel. In addition, the efficacy of the developed gel was tested in-vivo using 2,4-Dinitrochlorobenzene induced atopic dermatitis as lesion model in mice. F4 showed an average diameter 111 nm ± 0.03, zeta potential - 30 MV ± 2.4 and EE 75.2% ± 4.4. TEM images showed spherical, smooth morphology with uniform particles distribution. In-vivo study demonstrated potent antipruritic efficacy of transdermal gel in atopic dermatitis such as induced lesions compared to HHCL gel. Hence, HHCL solid lipid nanoparticles transdermal gel may be considered as potential for delivery of HHCL and alternatively to traditional oral use.

Solid Lipid Nanoparticles (SLNs): An Advanced Drug Delivery System Targeting Brain through BBB

The blood-brain barrier (BBB) plays a vital role in the protection and maintenance of homeostasis in the brain. In this way, it is an interesting target as an interface for various types of drug delivery, specifically in the context of the treatment of several neuropathological conditions where the therapeutic agents cannot cross the BBB. Drug toxicity and on-target specificity are among some of the limitations associated with current neurotherapeutics. In recent years, advances in nanodrug delivery have enabled the carrier system containing the active therapeutic drug to target the signaling pathways and pathophysiology that are closely linked to central nervous system (CNS) disorders such as Alzheimer's disease (AD), Parkinson's disease (PD), Huntington's disease (HD), multiple sclerosis (MS), brain tumor, epilepsy, ischemic stroke, and neurodegeneration. At present, among the nano formulations, solid lipid nanoparticles (SLNs) have emerged as a putative drug carrier system that can deliver the active therapeutics (drug-loaded SLNs) across the BBB at the target site of the brain, offering a novel approach with controlled drug delivery, longer circulation time, target specificity, and higher efficacy, and more importantly, reducing toxicity in a biomimetic way. This paper highlights the synthesis and application of SLNs as a novel nontoxic formulation strategy to carry CNS drugs across the BBB to improve the use of therapeutics agents in treating major neurological disorders in future clinics.

Recent advances in the design of microfluidic technologies for the manufacture of drug releasing particles

Drug releasing particles are valued for their ability to deliver therapeutics to targeted locations and for their controllable release patterns. The development of microfluidic technologies, which are designed specifically to manipulate small amounts of fluids, to manufacture particles for drug delivery applications reflects a recent trend due to the advantages they confer in terms of control over particle size and material composition. This review takes a comprehensive look at the different types of microfluidic devices used to fabricate such particles from different types of biomaterials, and at how the on-chip features enable the production of particles with different types of properties. The review concludes by suggesting avenues for future work that will enable these technologies to fulfill their potential and be used in industrial settings for the manufacture of drug releasing particles with unique capabilities.

Microparticle fabricated from a series of symmetrical lipids based on dihydroxyacetone form textured architectures

We report the synthesis of a series of symmetrical lipids composed of dihydroxyacetone and even‑carbon fatty acids (eight to sixteen carbons), both components of the human metabolome, and characterize their formulation into porous microparticles through spontaneous emulsification without the use of additional porogens. Lipid hydrolysis products were identified by ¹H NMR to validate lipid degradation into the parent metabolic synthons. Microparticle architecture, as determined by scanning electron microscopy, was lipid-length dependent, with shorter alkyl chains forming tight structures and longer alkyl chains forming larger pores with plate-like lipid architectures. In all cases, the lipids formed organized patterns, not irregular shapes. As a demonstration of the potential use of these solid lipid-based microparticles, the release kinetics of a model drug (piroxicam) was quantified showing that release was more greatly influenced by microparticle porosity, and hence surface area, than by hydrophobicity of the lipids.

Lipo-PEG nano-ocular formulation successfully encapsulates hydrophilic fluconazole and traverses corneal and non-corneal path to reach posterior eye segment

The present study describes a special lipid-polyethylene glycol matrix solid lipid nanoparticles (SLNs; 138 nm; -2.07 mV) for ocular delivery. Success of this matrix to encapsulate (entrapment efficiency - 62.09%) a hydrophilic drug, fluconazole (FCZ-SLNs), with no burst release (67% release in 24 h) usually observed with most water-soluble drugs, is described presently. The system showed 164.64% higher flux than the marketed drops (Zocon^®) through porcine cornea. Encapsulation within SLNs and slow release did not compromise efficacy of FCZ-SLNs. Latter showed in vitro and in vivo antifungal effects, including antibiofilm effects comparable to free FCZ solution. Developed system was safe and stable (even to sterilisation by autoclaving); and showed optimal viscosity, refractive index and osmotic pressure. These SLNs could reach up to retina following application as drops. The mechanism of transport via corneal and non-corneal transcellular pathways is described by fluorescent and TEM images of mice eye cross sections. Particles streamed through the vitreous, crossed inner limiting membrane and reached the outer retinal layers.

The vortex-driven dynamics of droplets within droplets

Understanding the fluid-structure interaction is crucial for an optimal design and manufacturing of soft mesoscale materials. Multi-core emulsions are a class of soft fluids assembled from cluster configurations of deformable oil-water double droplets (cores), often employed as building-blocks for the realisation of devices of interest in bio-technology, such as drug-delivery, tissue engineering and regenerative medicine. Here, we study the physics of multi-core emulsions flowing in microfluidic channels and report numerical evidence of a surprisingly rich variety of driven non-equilibrium states (NES), whose formation is caused by a dipolar fluid vortex triggered by the sheared structure of the flow carrier within the microchannel. The observed dynamic regimes range from long-lived NES at low core-area fraction, characterised by a planetary-like motion of the internal drops, to short-lived ones at high core-area fraction, in which a pre-chaotic motion results from multi-body collisions of inner drops, as combined with self-consistent hydrodynamic interactions. The onset of pre-chaotic behavior is marked by transitions of the cores from one vortex to another, a process that we interpret as manifestations of the system to maximize its entropy by filling voids, as they arise dynamically within the capsule.

Nanostructured Lipid Carriers (NLCs): Nose-to-Brain Delivery and Theranostic Application

BACKGROUND

Nanostructured lipid carriers (NLCs) are in high demand in the existing pharmaceutical domain due to its high versatility. It is the newer generation of lipid nanoparticulate systems having a solid matrix and greater stability at room temperature.

OBJECTIVE

To review the evidence related to the current state of the art of the NLCs system and its drug delivery perspectives to the brain.

METHODS

Scientific data search, review of the current state of the art and drug delivery perspectives to the brain for NLCs were undertaken to assess the applicability of NLCs in the management of neurological disorders through an intranasal route of drug administration.

RESULTS

NLCs are designed to fulfill all the industrial needs like simple technology, low cost, scalability, and quantifications. Biodegradable and biocompatible lipids and surfactants used for NLCs have rendered them acceptable from regulatory perspectives as well. Apart from these, NLCs have unique properties of high drug payload, modulation of drug release profile, minimum drug expulsion during storage, and incorporation in various dosage forms like gel, creams, granules, pellets, powders for reconstitution and colloidal dispersion. Ease of surface- modification of NLCs enhances targeting efficiency and reduces systemic toxicity by providing site-specific delivery to the brain through the intranasal route of drug administration.

CONCLUSION

The present review encompasses the in-depth discussion over the current state of the art of NLCs, nose-to-brain drug delivery perspectives, and its theranostic application as useful tools for better management of various neurological disorders. Further, pharmacokinetic consideration and toxicity concern is also discussed specifically for the NLCs system exploited in nose-to-brain delivery.

Preparation of Solid Lipid Nanoparticles and Nanostructured Lipid Carriers for Drug Delivery and the Effects of Preparation Parameters of Solvent Injection Method

Solid lipid nanoparticles (SLNs) and nanostructured lipid carriers (NLCs) have emerged as potential drug delivery systems for various applications that are produced from physiological, biodegradable, and biocompatible lipids. The methods used to produce SLNs and NLCs have been well investigated and reviewed, but solvent injection method provides an alternative means of preparing these drug carriers. The advantages of solvent injection method include a fast production process, easiness of handling, and applicability in many laboratories without requirement of complicated instruments. The effects of formulations and process parameters of this method on the characteristics of the produced SLNs and NLCs have been investigated in several studies. This review describes the methods currently used to prepare SLNs and NLCs with focus on solvent injection method. We summarize recent development in SLNs and NLCs production using this technique. In addition, the effects of solvent injection process parameters on SLNs and NLCs characteristics are discussed.

Spray congealed solid lipid microparticles as a sustained release delivery system for Gonadorelin [6-D-Phe]: Production, optimization and in vitro release behavior

Sustained release lipid microparticles for a potential veterinary application were produced by the means of spray congealing using saturated triglycerides with respective surfactants. The spray congealing process was optimized using unloaded and loaded microparticles, revealing the highest impact of the spray flow on material loss. Yield could be optimized by increasing the spray flow as well as a reduction of the melt temperature from 90 to 75 °C. For the delivery system developed in this study, a release of around 15 days was targeted. The release profile was in first hand determined with the use of model substances (aspartame and tryptophan), before incorporating the decapeptide Gonadorelin [6-D-Phe]. Release could be controlled between 2 and 28 d, which was dependent on stability of microparticles upon incubation, type and concentration of emulsifier, as well as the used triglyceride. Differential scanning calorimetry and X-ray powder diffraction confirmed the crystallization behavior of C14 and C16-triglycerides in combination with various emulsifiers in different modification without impact on release.

Formulation and Intracellular Trafficking of Lipid-Drug Conjugate Nanoparticles Containing a Hydrophilic Antitubercular Drug for Improved Intracellular Delivery to Human Macrophages

Isoniazid is an important first-line antitubercular drug used in the treatment of all major clinical manifestations of tuberculosis, including both pulmonary and cerebral diseases. However, it is associated with significant drawbacks due to its inherent hydrophilic nature, including poor gut permeability and an inability to cross the lipophilic blood-brain barrier, which, in turn, limit its clinical efficacy. We hypothesized that the addition of a hydrophobic moiety to this molecule would help overcome these limitations and improve its bioavailability in the bloodstream. Therefore, we designed a stable, covalently linked lipid-drug conjugate of isoniazid with a short lipid chain of stearoyl chloride. Further, lipid-drug conjugate nanoparticles were synthesized from the bulk lipid-drug conjugate by a cold high-pressure homogenization method enabled by the optimized use of aqueous surfactants. The nanoparticle formulation was characterized systematically using in vitro physicochemical analytical methods, including atomic force microscopy, transmission electron microscopy, differential scanning calorimetry, X-ray diffraction, attenuated total reflectance, particle size, ζ-potential, and drug release studies, and the mechanism of drug release kinetics. These investigations revealed that the lipid-drug conjugate nanoparticles were loaded with an appreciable amount of isoniazid conjugate (92.73 ± 6.31% w/w). The prepared lipid-drug conjugate nanoparticles displayed a uniform shape with a smooth surface having a particle size of 124.60 ± 5.56 nm. In vitro drug release studies showed sustained release up to 72 h in a phosphate-buffered solution at pH 7.4. The release profile fitted to various known models of release kinetics revealed that the Higuchi model of diffusion kinetics was the best-fitting model (R 2 = 0.9929). In addition, confocal studies showed efficient uptake of lipid-drug conjugate nanoparticles by THP-1 macrophages presumably because of increased lipophilicity and anionic surface charge. This was followed by progressive intracellular trafficking into endosomal and lysosomal vesicles and colocalization with intravesicular compartmental proteins associated with mycobacterium tuberculosis pathogenesis, including CD63, LAMP-2, EEA1, and Rab11. The developed lipid-drug conjugate nanoparticles, therefore, displayed significant ability to improve the intracellular delivery of a highly water-soluble drug such as isoniazid.

Antioxidants in Cancer Therapy: Recent Trends in Application of Nanotechnology for Enhanced Delivery

Recently, the occurrence of cancer has significantly increased; it represents the second-most frequent cause of death after cardiovascular diseases. Many dietary antioxidants have shown large impact as effective agents for cancer prevention by reducing oxidative stress, which has been a part in the development of many diseases, including cancer. One of the obstacles in the delivery of antioxidant therapies into the required domain lies in the inadequate delivery of these agents to their intended site of action. Using nanotechnology in delivery of antioxidants leads to increased therapeutic index and higher drug concentration in tumor tissues, thus enhancing anticancer treatment. In this review, we discuss the role of different antioxidants in cancer therapy and their improved therapeutic effect through their formulation using nanotechnology.

Spray congealing: a versatile technology for advanced drug-delivery systems

Spray congealing is a low cost, simple and versatile method to produce microparticles without the use of organic or aqueous solvent. This review provides a detailed picture of the pharmaceutical applications of this technology, with an overview of the spray-congealed-based drug-delivery systems. First, the basic principles and equipment of spray congealing technology are presented. Then, representative examples of the drug-delivery systems are examined and critically discussed. Emphasis is given on the role of formulation variables, together with practical considerations for formulation design. In addition, the current status of the industrial applications of this technology within the pharmaceutical field is examined. The final part points out benefits, limitations and future perspectives of this technology in drug delivery.

1-Laurin-3-Palmitin as a Novel Matrix of Solid Lipid Particles: Higher Loading Capacity of Thymol and Better Stability of Dispersions Than Those of Glyceryl Monostearate and Glyceryl Tripalmitate

To develop solid lipid nanoparticles (SLNs) with a new lipid matrix for delivery of hydrophobic bioactive molecules, high purity 1-laurin-3-palmitin (1,3-LP) was synthesized and the prepared 1,3-LP SLNs were compared with those of two common SLN matrices in glyceryl monostearate (GMS) and glyceryl tripalmitate (PPP). Conditions of preparing SLNs were first optimized by evaluating the particle size, polydispersity index (PDI), zeta-potential, and stability. Thereafter, the performance of SLN loading of a model compound in thymol was studied. The loading capacity of thymol in 1,3-LP SLNs was 16% of lipids and higher than 4% and 12% for GMS- and PPP-SLNs, respectively. The 1,3-LP SLNs also had the best efficiency to entrapment thymol during the prolonged storage. X-ray diffraction (XRD) analyses confirmed the excellent crystalline stability of 1,3-LP leading to the stable entrapment efficiency and better stability of thymol-loaded SLNs. Conversely, the polymorphic transformation of GMS and PPP resulted in the declined entrapment efficiency of thymol in the corresponding SLNs. This work indicated the 1,3-diacylglycerol (DAG) SLNs could be used as a promising delivery system for the encapsulation of hydrophobic bioactive molecules with high loading capacity and stability.

Recent progress in nanomaterials for gene delivery applications

Nanotechnology-based gene delivery is the division of nanomedicine concerned with the synthesis, characterization, and functionalization of nanomaterials to be used in targeted-gene delivery applications. Nanomaterial-based gene delivery systems hold great promise for curing fatal inherited and acquired diseases, including neurological disorders, cancer, cardiovascular diseases, and acquired immunodeficiency syndrome (AIDS). However, their use in clinical applications is still controversial. To date, the Food and Drug Administration (FDA) has not approved any gene delivery system because of the unknown long-term toxicity and the low gene transfection efficiency of nanomaterials in vivo. Compared to viral vectors, nonviral gene delivery vectors are characterized by a low preexisting immunogenicity, which is important for preventing a severe immune response. In addition, nonviral vectors provide higher loading capacity and ease of fabrication. For these reasons, this review article focuses on applications of nonviral gene delivery systems, including those based on lipids, polymers, graphene, and other inorganic nanoparticles, and discusses recent advances in nanomaterials for gene therapy. Methods of synthesizing these nanomaterials are briefly described from a materials science perspective. Also, challenges, critical issues, and concerns about the in vivo applications of nanomaterial-based gene delivery systems are discussed. It should be noted that this article is not a comprehensive review of the literature.

Production and Characterization of a Clotrimazole Liposphere Gel for Candidiasis Treatment

This study describes the design and characterization of a liposphere gel containing clotrimazole for the treatment of Candida albicans. Lipospheres were produced by the melt-dispersion technique, using a lipid phase constituted of stearic triglyceride in a mixture with caprylic/capric triglyceride or an alkyl lactate derivative. The latter component was added to improve the action of clotrimazole against candida. The liposphere morphology and dimensional distribution were evaluated by scanning electron microscopy. Clotrimazole release kinetics was investigated by an in vitro dialysis method. An anticandidal activity study was conducted on the lipospheres. To obtain formulations with suitable viscosity for vaginal application, the lipospheres were added to a xanthan gum gel. The rheological properties, spreadability, leakage, and adhesion of the liposphere gel were investigated. Clotrimazole encapsulation was always over 85% w/w. The anticandidal study demonstrated that the encapsulation of clotrimazole in lipospheres increased its activity against Candida albicans, especially in the presence of the alkyl lactate derivative in the liposphere matrix. A dialysis method demonstrated that clotrimazole was slowly released from the liposphere gel and that the alkyl lactate derivative further controlled clotrimazole release. Adhesion and leakage tests indicated a prolonged adhesion of the liposphere gel, suggesting its suitability for vaginal application.

Nanotherapeutics: An insight into healthcare and multi-dimensional applications in medical sector of the modern world

In recent years nanotechnology has revolutionized the healthcare strategies and envisioned to have a tremendous impact to offer better health facilities. In this context, medical nanotechnology involves design, fabrication, regulation, and application of therapeutic drugs and devices having a size in nano-range (1-100 nm). Owing to the revolutionary implications in drug delivery and gene therapy, nanotherapeutics has gained increasing research interest in the current medical sector of the modern world. The areas which anticipate benefits from nano-based drug delivery systems are cancer, diabetes, infectious diseases, neurodegenerative diseases, blood disorders and orthopedic problems. The development of nanotherapeutics with multi-functionalities has considerable potential to fill the lacunae existing in the present therapeutic domain. Nanomedicines in the field of cancer management have enhanced permeability and retention of drugs thereby effectively targeting the affected tissues. Polymeric conjugates of asparaginase, polymeric micelles of paclitaxel have been recmended for various types of cancer treatment .The advancement of nano therapeutics and diagnostics can provide the improved effectiveness of the drug with less or no toxicity concerns. Similarly, diagnostic imaging is having potential future applications with newer imaging elements at nano level. The newly emerging field of nanorobotics can provide new directions in the field of healthcare. In this article, an attempt has been made to highlight the novel nanotherapeutic potentialities of polymeric nanoparticles, nanoemulsion, solid lipid nanoparticle, nanostructured lipid carriers, dendrimers, nanocapsules and nanosponges based approaches. The useful applications of these nano-medicines in the field of cancer, nutrition, and health have been discussed in details. Regulatory and safety concerns along with the commercial status of nanosystems have also been presented. In summary, a successful translation of emerging nanotherapeutics into commercial products may lead to an expansion of biomedical science. Towards the end of the review, future perspectives of this important field have been introduced briefly.

Bio-shielding In Situ Forming Gels (BSIFG) Loaded With Lipospheres for Depot Injection of Quetiapine Fumarate: In Vitro and In Vivo Evaluation

Quetiapine fumarate (QF), an anti-schizophrenic drug, suffers from rapid elimination and poor bioavailability due to extensive first-pass effect. Intramuscularly (IM) injected lipospheres were designed to enhance the drug's bioavailability and extend its release. A central composite design was applied to optimize the liposphere preparation by a melt dispersion technique using Compritol® 888 ATO or glyceryl tristearate as lipid component and polyvinyl alcohol as surfactant. Lipospheres were evaluated for their particle size, entrapment efficiency, and in vitro release. The optimized QF lipospheres were prepared using a Compritol® 888 ATO fraction of 18.88% in the drug/lipid mixture under a stirring rate of 3979 rpm. The optimized lipospheres were loaded into a thermoresponsive in situ forming gel (TRIFG) and a liquid crystalline in situ forming gel (LCIFG) to prevent in vivo degradation by lipases. The loaded gels were re-evaluated for their in vitro release and injectability. Bioavailability of QF from liposphere suspension and bio-shielding in situ gels loaded with QF lipospheres were assessed in rabbits compared to drug suspension. Results revealed that the AUC_0-72 obtained from the liposphere-loaded TRIFG was ∼3-fold higher than that obtained from the aqueous drug suspension indicating the bio-shielding effect of Poloxamer® 407 gel to inhibit the biodegradation of the lipospheres prolonging the residence of the drug in the muscle for higher absorption. Our results propose that bio-shielding in situ Poloxamer® 407 gels loaded with lipospheres is promising for the development of IM depot injection of drugs having extensive first-pass metabolism and rapid elimination.

Vitamin D3-Loaded Nanostructured Lipid Carriers as a Potential Approach for Fortifying Food Beverages; in Vitro and in Vivo Evaluation

Purpose: Nanostructured lipid carriers (NLCs) composed of solid lipid and oil are a new generation of lipid nanoparticles which have exhibited some merits over traditional used lipid nanoparticles in fortifying food and beverages and nutraceuticals delivery systems such as liposomes and solid lipid nanoparticles.

Methods: In this study, Precirol and Compritol as solid lipids, Miglyol and Octyloctanoat as liquid lipids, Tween80, Tween20 and Poloxamer407 as surfactants were used to prepare vitamin D₃-loaded NLC dispersion using hot homogenization method. The particle size and size distribution for all formulations were evaluated by immediately after production and during a storage period of 60 days.

Results: The Precirol-based NLC showed superiority over Compritol-based NLC in the point of physical stability. Results clearly suggested that an optimum concentration of 3% of Poloxamer407 or 2% of Tween20 was sufficient to cover the surface of nanoparticles effectively and prevent agglomeration during the homogenization process. Octyloctanoat was introduced for the first time as a good substituent for Miglyol in the preparation of NLC formulations. The vitamin D₃ Intestinal absorption enhanced by the incorporating in NLCs.

Conclusion: It was concluded that NLC showed a promising approach for fortifying beverages by lipophilic nutraceuticals such as vitamin D.

Nanostructured lipid carriers (NLC) for the delivery of natural molecules with antimicrobial activity: production, characterisation and in vitro studies

This study describes the preparation, characterisation and in vitro activity of nanostructured lipid carriers (NLCs) encapsulating natural molecules with antimicrobial activity, such as plumbagin, hydroquinon, eugenol, alpha-asarone and alpha-tocopherol. NLCs were prepared by melt and ultrasonication method, characterised by Cryo-TEM for morphology and SdFFF for dimensional distribution and active encapsulation yields. In vitro tests were conducted on bacteria, fungi and human cell cultures. In vitro tests demonstrated that plumbagin is strongly toxic towards F. oxysporum especially when active molecules are loaded on NLC. Plumbagin was completely non toxic on cyanobacterial model strain up to a threshold over which cell viability was completely lost. NLC loaded with active molecules showed a lower toxicity as compared to their free form on human cultured cells. Although further studies need to be performed, these systems can be potentially proposed to control phytopathogenic organisms.

Advances in Hybrid Polymer-Based Materials for Sustained Drug Release

The use of biomaterials composed of organic pristine components has been successfully described in several purposes, such as tissue engineering and drug delivery. Drug delivery systems (DDS) have shown several advantages over traditional drug therapy, such as greater therapeutic efficacy, prolonged delivery profile, and reduced drug toxicity, as evidenced by in vitro and in vivo studies as well as clinical trials. Despite that, there is no perfect delivery carrier, and issues such as undesirable viscosity and physicochemical stability or inability to efficiently encapsulate hydrophilic/hydrophobic molecules still persist, limiting DDS applications. To overcome that, biohybrid systems, originating from the synergistic assembly of polymers and other organic materials such as proteins and lipids, have recently been described, yielding molecularly planned biohybrid systems that are able to optimize structures to easily interact with the targets. This work revised the biohybrid DDS clarifying their advantages, limitations, and future perspectives in an attempt to contribute to further research of innovative and safe biohybrid polymer-based system as biomaterials for the sustained release of active molecules.

Topical ketoprofen nanogel: artificial neural network optimization, clustered bootstrap validation, and in vivo activity evaluation based on longitudinal dose response modeling

OBJECTIVES

This work aimed at investigating the potential of solid lipid nanoparticles (SLN) as carriers for topical delivery of Ketoprofen (KP); evaluating a novel technique incorporating Artificial Neural Network (ANN) and clustered bootstrap for optimization of KP-loaded SLN (KP-SLN); and demonstrating a longitudinal dose response (LDR) modeling-based approach to compare the activity of topical non-steroidal anti-inflammatory drug formulations.

METHODS

KP-SLN was fabricated by a modified emulsion/solvent evaporation method. Box-Behnken design was implemented to study the influence of glycerylpalmitostearate-to-KP ratio, Tween 80, and lecithin concentrations on particle size, entrapment efficiency, and amount of drug permeated through rat skin in 24 hours. Following clustered bootstrap ANN optimization, the optimized KP-SLN was incorporated into an aqueous gel and evaluated for rheology, in vitro release, permeability, skin irritation and in vivo activity using carrageenan-induced rat paw edema model and LDR mathematical model to analyze the time course of anti-inflammatory effect at various application durations.

RESULTS

Lipid-to-drug ratio of 7.85 [bootstrap 95%CI: 7.63-8.51], Tween 80 of 1.27% [bootstrap 95%CI: 0.601-2.40%], and Lecithin of 0.263% [bootstrap 95%CI: 0.263-0.328%] were predicted to produce optimal characteristics. Compared with profenid® gel, the optimized KP-SLN gel exhibited slower release, faster permeability, better texture properties, greater efficacy, and similar potency.

CONCLUSIONS

SLNs are safe and effective permeation enhancers. ANN coupled with clustered bootstrap is a useful method for finding optimal solutions and estimating uncertainty associated with them. LDR models allow mechanistic understanding of comparative in vivo performances of different topical formulations, and help design efficient dermatological bioequivalence assessment methods.

Morphological and release characterization of nanoparticles formulated with poly (dl-lactide-co-glycolide) (PLGA) and lupeol: In vitro permeability and modulator effect on NF-κB in Caco-2 cell system stimulated with TNF-α

Lupeol exhibits anti-inflammatory effects; unfortunately it shows low water solubility. An alternative to overcome this is the development of nanomaterials. Several methods for nanomaterial production are available. One of them is emulsification/solvent-evaporation. The objective of the present work was to evaluate physical properties, transport and in vitro modulator effects on NF-κB of poly (lactide-co-glycolide) (PLGA) nanoparticles loaded with lupeol. Nanonutraceuticals were prepared with 16% (w/v) of lupeol. Size distribution and morphology were measured by particle size analyzer and TEM. In vitro release of lupeol was studied by three different models: Higuchi, Siepmann & Peppas, and Power law. Transport of nanonutraceutical was studied in a Caco-2 cell model and by GC-MS. Modulator effect on NK-κB was studied by western blot analysis. Nanonutraceuticals were 10% larger than the nanoparticles without lupeol (372 vs 337 nm) and presented a broader size distribution (0.28 vs 0.22). TEM results displayed spherical structures with a broader size distribution. Entrapment efficiency of lupeol was 64.54% and it in vitro release data fitted well to the Power law and Higuchi equation (R > 0.84-0.84). Strong regulation of NF-κB of nanonutraceutical was observed. It was not observed any transport across the Caco-2 cell model at the different experimental conditions.

The use of solid lipid nanoparticles for sustained drug release

Novel solid lipid drug delivery systems such as solid lipid nanoparticles (SLN) have attracted wide and increasing attention in recent years. It has been sought as an interesting alternative drug delivery carrier system for bioactives for a variety of delivery routes. They show major advantages such as sustained release, improved bioavailability, improved drug incorporation and very wide application. This paper presents a discussion on the production protocols of SLN, lyophilization of SLN and delivery of SLN across the blood–brain barrier. Special attention was also paid to entrapment and release of drugs from SLN and strategies to enhance drug entrapment in SLN for sustained release. Analytical methods for the characterization of SLN were also discussed. Various routes of administration of SLN were presented as well as a consideration of the ethical issues and future prospects in the production and use of SLN for sustained release of bioactives.

Solid lipid nanoparticles loaded with iron to overcome barriers for treatment of iron deficiency anemia

According to the World Health Organization, 46% of the world’s children suffer from anemia, which is usually treated with iron supplements such as ferrous sulfate. The aim of this study was to prepare iron as solid lipid nanoparticles, in order to find an innovative way for alleviating the disadvantages associated with commercially available tablets. These limitations include adverse effects on the digestive system resulting in constipation and blood in the stool. The second drawback is the high variability in the absorption of iron and thus in its bioavailability. Iron solid lipid nanoparticles (Fe-SLNs) were prepared by hot homogenization/ultrasonication. Solubility of ferrous sulfate in different solid lipids was measured, and effects of process variables such as the surfactant type and concentration, homogenization and ultrasonication times, and charge-inducing agent on the particle size, zeta potential, and encapsulation efficiency were determined. Furthermore, in vitro drug release and in vivo pharmacokinetics were studied in rabbits. Results indicated that Fe-SLNs consisted of 3% Compritol 888 ATO, 1% Lecithin, 3% Poloxamer 188, and 0.2% dicetylphosphate, with an average particle size of 25 nm with 92.3% entrapment efficiency. In vivo pharmacokinetic study revealed more than fourfold enhanced bioavailability. In conclusion, Fe-SLNs could be a promising carrier for iron with enhanced oral bioavailability.

Solid lipid nanoparticles (SLNs): delivery vehicles for food bioactives

Bioactives which are isolated from different sources like plants, animals, etc. are known to be ideal candidates to treat and prevent chronic health problems such as obesity, hypertension, cardiovascular diseases, cancer, etc.

A perspective overview on lipospheres as lipid carrier systems

Both hydrophilic and lipophilic therapeutics can be delivered successfully into deep and peripheral tissues such as cerebrospinal fluid and central nervous system by encapsulating them with crystalline lipids as lipospheres. The advent of lipospheres was meant to deliver both therapeutic moieties with enhanced efficacy and added stability to reach out intended tissue areas. Although extensive information is available on physicochemical, analytical and biopharmaceutical aspects of lipospheres, there was no specific order pertaining to critical composition and rationale of component selection available for academic and pilot scale processing of lipospheres. With the interest of compiling key points in a typical formulation of lipid lipospheres, this article was intrigued to discuss melt method, co-solvent, microemulsion, super critical fluid, spray drying and spray congealing techniques that were employed to scale up lipospheres. The selection criteria for both the drugs and lipids in liposphere formulations were demonstrated here. The quality assessment with variables like loading capacity and entrapment efficiency was explained. A note on preliminary screening factors to determine the liposphere formation such as liposphere dimensions with morphological scenario was detailed in this article. This article also includes the stability and storage issues with reference to photolysis. The marked differential in enhancing solubility and permeability characteristics of Class II and IV drug candidates by liposphere delivery systems with an evident of in vivo outcomes were emphasized.

Morphology and functions of astrocytes cultured on water-repellent fractal tripalmitin surfaces

In the brain, astrocytes play an essential role with their multiple functions and sophisticated structure, as surrounded by a fractal environment which has not been available in our traditional cell culture. Water-repellent fractal tripalmitin (PPP) surfaces can imitate the fractal environment in vivo, so the morphology and biochemical characterization of astrocytes on these surfaces are examined. Water-repellent fractal PPP surface can induce astrocytes to display sophisticated morphology with smaller size of cell area, longer and finer filopodium-like processes, and higher morphological complexity. The super water-repellent fractal PPP surface with water contact angle of 150°∼160° produces the maximal effects compared with other surfaces at lower water contact angles. The trends of characteristic protein expression, including that of nestin, vimentin, GFAP and glutamine synthetase, for astrocytes cultured on super water-repellent fractal PPP surfaces approximate more to in vivo pattern. The super water-repellent PPP surface also render astrocytes to perform more pronounced promotion of neurogenesis by increasing the release of nerve growth factor in a co-culture system. Altogether, our results suggest that the super water-repellent fractal PPP surface facilitates the astrocytes to mimic their in vivo performance, thus provides a closer-to-natural culture environment for experimental assessment of glial structure and functions.