The use of micellar systems in the extraction and pre-concentration of organic pollutants in environmental samples

Cloud point method applied to the extraction and preconcentration of thiabendazole pesticide from whole grape juice samples and amperometric detection by HPLC

A cloud point method was developed and applied for the first time to extract and preconcentrate thiabendazole (TBZ) from commercial whole grape juice samples, with determination by high performance liquid chromatography coupled to electrochemical detection (HPLC/EC), using a cathodically pretreated boron-doped diamond electrode (BDD). The best conditions for extraction and preconcentration of TBZ by cloud point extraction (CPE) were performed at pH 6.0, by adding 1 mL of the surfactant Tergitol TMN-6 at 10% (mass-to-mass ratio), without heating (at 27 °C) and ultrasonic stirring time of (20 kHz) for 60 min. The HPLC/EC determination was duly validated in a C8 column, in mobile phase with a 69 : 31 ratio (V/V) of phosphate buffer (pH 7.0):ACN, at a flow rate of 1.2 mL min-1 and electrochemical detection with BDD electrode by applying 1.40 V × Ag/AgCl (3.0 mol L-1). Under these conditions, the procedure showed a preconcentration factor (FC) of 21.7, and limits of detection (LOD) and quantification (LOQ) of 6.64 × 10-9 mol L-1 (or 1.33 μg L-1) and 1.66 × 10-8 mol L-1 (or 3.34 μg L-1), respectively. The method provided a percent recovery of 81% to 98%, with a coefficient of variation between 3% and 15%.

Exolaccase-boosted humification for agricultural applications

Globally, phenolic contaminants have posed a considerable threat to agro-ecosystems. Exolaccase-boosted humification may be an admirable strategy for phenolic detoxification by creating multifunctional humic-like products (H-LPs). Nonetheless, the potential applicability of the formed H-LPs in agricultural production is still overlooked. This review describes immobilized exolaccase-enabled humification in eliminating phenolic pollutants and producing artificial H-LPs. The similarities and differences between artificial H-LPs and natural humic substances (HSs) in chemical properties are compared. In particular, the agronomic effects of these reproducible artificial H-LPs are highlighted. On the basis of the above summary, the granulation process is employed to prepare granular humic-like organic fertilizers, which can be applied to field crops by mechanical side-deep fertilization. Finally, the challenges and perspectives of exolaccase-boosted humification for practical applications are also discussed. This review is a first step toward a more profound understanding of phenolic detoxification, soil improvement, and agricultural production by exolaccase-boosted humification.

•

Exolaccase-initiated humification is conductive to phenolic detoxification

•

Multiple humic-like products are created in exolaccase-boosted humification

•

Similarities and differences between artificial and natural humus are disclosed

•

Humic-like products can be used to sustain soil health and increase crop yield

Optimization of Pulsed Electric Field as Standalone "Green" Extraction Procedure for the Recovery of High Value-Added Compounds from Fresh Olive Leaves

Olive leaves (OLL) are reported as a source of valuable antioxidants and as an agricultural by-product/waste. Thus, a twofold objective with multi-level cost and environmental benefits arises for a "green" standalone extraction technology. This study evaluates the OLL waste valorization through maximizing OLL extracts polyphenol concentration utilizing an emerging "green" non-thermal technology, Pulsed Electric Field (PEF). It also provides further insight into the PEF assistance span for static solid-liquid extraction of OLL by choosing and fine-tuning important PEF parameters such as the extraction chamber geometry, electric field strength, pulse duration, pulse period (and frequency), and extraction duration. The produced extracts were evaluated via comparison amongst them and against extracts obtained without the application of PEF. The Folin-Ciocalteu method, high-performance liquid chromatography, and differential scanning calorimetry were used to determine the extraction efficiency. The optimal PEF contribution on the total polyphenols extractability (38% increase with a 117% increase for specific metabolites) was presented for rectangular extraction chamber, 25% v/v ethanol:water solvent, pulse duration (tpulse) 2 μs, electric field strength (E) 0.85 kV cm-1, 100 μs period (Τ), and 15 min extraction duration (textraction), ascertaining a significant dependence of PEF assisting extraction performance to the parameters chosen.

Pulsed Electric Field and Salvia officinalis L. Leaves: A Successful Combination for the Extraction of High Value Added Compounds

The present study aimed to evaluate the pulsed electric field (PEF)-assisted extraction of phytochemicals from Salvia officinalis L. leaves. The study parameters included a PEF pulse duration of 10 or 100 μs for 30 min, using different "green" extraction solvents: pure ethanol, pure water, and their mixtures at 25, 50, and 75% v/v concentrations. The resulting extracts were evaluated against reference extracts obtained without PEF. For estimation of the extraction efficiency, the content in total polyphenols, individual polyphenols, and volatile compounds, as well as the resistance to oxidation, were determined. The optimal PEF contribution on the total and individual polyphenols, rosmarinic acid, extractability (up to 73.2% and 403.1% increase, respectively) was obtained by 25% v/v aqueous ethanol solvent using a pulse duration of 100 μs. PEF was proven to also affect the final concentration and composition of volatile compounds of the extracts obtained.

Use of Pulsed Electric Field as a Low-Temperature and High-Performance “Green” Extraction Technique for the Recovery of High Added Value Compounds from Olive Leaves

Olive leaves (OLL), an agricultural waste by-product, are considered a significant bioresource of polyphenols, known as bioactive compounds. This study evaluates the pulsed electric field (PEF) technique for the extraction of polyphenols from OLL. The study parameters included a series of “green” solvents (ethanol, water as well as mixtures of them at a 25% step gradient) and different input values for the pulse duration of PEF. The phytochemical extraction degree was evaluated using total phenol concentration (Folin–Ciocalteu method) and high-performance liquid chromatography (HPLC) analyses, while the antioxidant activity was assessed using differential scanning calorimetry (DSC). The results obtained from the PEF extracts were compared with those of the extracts produced without the PEF application. The highest PEF effect was observed for aqueous ethanol, 25% v/v, using a pulse duration of 10 μs. The increase in the total polyphenols reached 31.85%, while the increase in the specific metabolites reached 265.67%. The recovery in polyphenols was found to depend on the solvent, the pulse duration of treatment and the structure of the metabolites extracted.

Quantitative Detection of Zinc Oxide Nanoparticle in Environmental Water by Cloud Point Extraction Combined ICP-MS

The increasing usage of zinc oxide nanoparticles (ZnONPs) inevitably leads to their release into the environment. To understand their fate and toxicity in water systems, a reliable method for the quantitative analysis of ZnONPs in environmental waters is urgently needed to be established. In this study, a quantitative analytical method of ZnONPs in environmental waters was developed by cloud point extraction (CPE) combined inductively coupled plasma mass spectrometry (ICP-MS). To obtain high recoveries of ZnONPs, the CPE parameters including pH, surfactant concentration, salt concentration, bath temperature, and time were optimized. The results demonstrated that the addition of β-mercaptoethylamine could significantly reduce the interference of Zn2+ on the extraction of ZnONPs, while the CPE approach was not affected significantly by the typical environmental inorganic ion and ENMs (such as Au, TiO2, and Al2O3). The extraction method of ZnONPs with different diameters was also assessed, and satisfactory extraction efficiency was obtained. The results of ZnONP concentration in collected environmental water were in the range of $0.2\pm 0.009$ - $8.2\pm 1.8$  μg/L. And the recoveries of ZnONPs in different environmental waters were $62.2\pm 2.0$ - $88.1\pm 9.6\%$ at low concentration spiked levels (12.57-54.68 μg/L), demonstrating that it is efficient to extract trace ZnONPs from real environmental waters. This established method offered a reliable method for the quantitative determination of ZnONPs in environmental waters, which could further promote the study of the environmental behavior, fate, and toxicity of ZnONPs in an aqueous environment.

Electrochemical determination of thiabendazole pesticide extracted and preconcentrated from tomato samples by cloud point extraction

A procedure for electroanalytical determination of the fungicide TBZ extracted and preconcentrated from tomatoes by the cloud-point extraction (CPE) technique was developed and validated in this work. The analytical technique used for this determination was HPLC coupled to an electrochemical detector (HPLC/EC), with a BDD electrode. The main variables of the CPE process were evaluated using a 24 full factorial design. The optimal condition of CPE was achieved by using Tergitol (19% v/v), NaCl (0.83 g), ultrasonic stirring time of 15 min and a temperature of 36 °C. Under these conditions, the preconcentration factor obtained was 5.7. The limits of detection (LOD) and quantification (LOQ) were 2.7 × 10-8 mol L-1 (or 5.4 μg L-1) and 5.5 × 10-8 mol L-1 (or 11 μg L-1), respectively. The average recovery values varied from 80.7% to 115.1% and the precision (average of 3 days) was less than 15%, indicating the good accuracy and precision of the method developed here. Upon applying the method to examine commercial tomatoes, TBZ was detected in one of the three analyzed samples.

Cloud Point Extraction in the Determination of Drugs in Biological Matrices

Cloud point extraction (CPE) is a simple, safe and environment-friendly technique used in the preparation of various samples. It was primarily developed for the assessment of environmental samples, especially analyzed for metals. Recently, this technique has been used in the extraction and determination of various chemical compounds (e.g., drugs, pesticides and vitamins), in various matrices (e.g., human plasma, human serum, milk and urine). In this review, we show that CPE is a reliable method of extraction and can be used in analytical laboratories in combination with other techniques that can be used in the determination of drugs and other chemicals in the human biological matrix. According to the literature, a combination of different methods provides good recovery and can be used in the simultaneous determination of many drugs in a single analysis. CPE can be optimized by changing its conditions (e.g., type of surfactant used, incubation temperature, pH and the addition of salts). In this review, we present the optimized CPE methods used in the determination of various pharmaceuticals and describe how the conditions affect the performance of extraction. This data might support future designing of the new CPE applications that are simple and more accurate. We compared CPE with other extraction methods and also showed the advantages and disadvantages of various extraction techniques along with a discussion on their environmental impact. According to the publications reviewed, it is obvious that CPE is an easy, safe, rapid and inexpensive method of extraction.

Supramolecular Solvent-Based Microextraction of Selected Anticonvulsant and Nonsteroidal Anti-Inflammatory Drugs from Sediment Samples

The increase in the production and consumption of pharmaceuticals increases their presence in the global environment, which may result in direct threats to living organisms. For this reason, there is a need for new methods to analyze drugs in environmental samples. Here, a new procedure for separating and determining selected drugs (diclofenac, ibuprofen, and carbamazepine) from bottom sediment and water samples was developed. Drugs were determined by ultra-high performance liquid chromatography coupled with an ultraviolet detector (UHPLC-UV). In this work, a universal and single-step sample treatment, based on supramolecular solvents (SUPRAS), was proposed to isolate selected anticonvulsants and nonsteroidal anti-inflammatory drugs (NSAIDs) from sediment samples. The following parameters were experimentally selected: composition of the supramolecular solvent (composition THF:H₂O (v/v), amount of decanoic acid), volume of extractant, sample mass, extraction time, centrifugation time, and centrifugation speed. Finally, the developed procedure was validated. A Speedisk procedure was also developed to extract selected drugs from water samples. The recovery of analytes using the SUPRAS procedure was in the range of 88.8-115%, while the recoveries of the Speedisk solid-phase extraction procedure ranged from 81.0-106%. The effectiveness of the sorption of the tested drugs by sediment was also examined.

Development of an online SPE-UHPLC-MS/MS method for the multiresidue analysis of the 17 compounds from the EU "Watch list"

During the last decades, the quality of aquatic ecosystems has been threatened by increasing levels of pollutions, caused by the discharge of man-made chemicals, both via accidental release of pollutants as well as a consequence of the constant outflow of inadequately treated wastewater effluents. For this reason, the European Union is updating its legislations with the aim of limiting the release of emerging contaminants. The Commission Implementing Decision (EU) 2015/495 published in March 2015 drafts a "Watch list" of compounds to be monitored Europe-wide. In this study, a methodology based on online solid-phase extraction (SPE) ultra-high-performance liquid chromatography coupled to a triple-quadrupole mass spectrometer (UHPLC-MS/MS) was developed for the simultaneous determination of the 17 compounds listed therein. The proposed method offers advantages over already available methods, such as versatility (all 17 compounds can be analyzed simultaneously), shorter time required for analysis, robustness, and sensitivity. The employment of online sample preparation minimized sample manipulation and reduced dramatically the sample volume needed and time required, dramatically the sample volume needed and time required, thus making the analysis fast and reliable. The method was successfully validated in surface water and influent and effluent wastewater. Limits of detection ranged from sub- to low-nanogram per liter levels, in compliance with the EU limits, with the only exception of EE2. Graphical abstract Schematic of the workflow for the analysis of the Watch list compounds.

Application of Micellar Extraction for Isolation of Famotidine from Aqueous Samples Prior to its Chromatographic Determination

Micellar extraction was applied to isolate famotidine from aqueous samples. This drug is an H₂ receptor antagonist used for the treatment of stomach diseases. The process was performed with a mixture of anionic sodium dodecylsulfate and nonionic Triton X-114 surfactants. The effect of different parameters on the efficiency of the micellar extraction such as electrolyte and surfactant concentration, pH of sample, temperature, shaking and centrifugation time was investigated. The influence of foreign substances on a studied process was tested. The elaborated procedure was applied for HPLC–UV determination of famotidine in natural water samples. The calibration graph was recorded in the range 1.35–37.12 μg mL⁻¹ of the studied compound. The repeatability of the method was equal to 7.4%. The limit of detection and quantification values for the determination of famotidine by using the proposed method amounted to 0.40 and 1.25 μg mL⁻¹, respectively.

Polyoxyethylene alkyl ether carboxylic acids: An overview of a neglected class of surfactants with multiresponsive properties

In this work, an overview on aqueous solutions of polyoxyethylene alkyl ether carboxylic acids is given. Unique properties arise from the combination of the nonionic, temperature-responsive polyoxyethylene block with the weakly ionic, pH-responsive carboxylic acid termination in a single surfactant headgroup. Accordingly, this class of surfactant finds broad application across very different sectors. Despite their large use on an industrial and a technical scale, the literature lacks a systematic and detailed characterization of their physico-chemical properties which is provided herein. In addition, a comprehensive overview is given of their self-assembly and interfacial behavior, of their use as colloidal building blocks and for large-scale applications.

Green analytical chemistry – the use of surfactants as a replacement of organic solvents in spectroscopy

This chapter gives an introduction to the many practical uses of surfactants in analytical chemistry in replacing organic solvents to achieve greener chemistry. Taking a holistic approach, it covers​ some background of surfactants as chemical solvents, their properties and as green chemicals, including their environmental effects. The achievements of green analytical chemistry with micellar systems are reviewed in all the major areas of analytical chemistry where these reagents have been found to be useful.

Investigation of cloud point extraction for the analysis of metallic nanoparticles in a soil matrix

The characterization of manufactured nanoparticles (MNPs) in environmental samples is necessary to assess their behavior, fate and potential toxicity. Several techniques are available, but the limit of detection (LOD) is often too high for environmentally relevant concentrations. Therefore, pre-concentration of MNPs is an important component in the sample preparation step, in order to apply analytical tools with a LOD higher than the ng kg^-1 level. The objective of this study was to explore cloud point extraction (CPE) as a viable method to pre-concentrate gold nanoparticles (AuNPs), as a model MNP, spiked into a soil extract matrix. To that end, different extraction conditions and surface coatings were evaluated in a simple matrix. The CPE method was then applied to soil extract samples spiked with AuNPs. Total gold, determined by inductively coupled plasma mass spectrometry (ICP-MS) following acid digestion, yielded a recovery greater than 90 %. The first known application of single particle ICP-MS and asymmetric flow field-flow fractionation to evaluate the preservation of the AuNP physical state following CPE extraction is demonstrated.

Determination of photoinitiator 4-methylbenzophenone in milk by cloud point extraction

An efficient and easy sample pretreatment methodology was proposed for the detection of photoinitiator 4-methylbenzophenone from milk before high-performance liquid chromatography. Appropriate conditions for demulsification were studied. The parameters affecting cloud point extraction, such as concentration of Tween-20, electrolyte salt, equilibration temperature, and time, have been investigated. When the spiked level was 200-1000 μg/kg, the average addition standard recovery was 99.14-105.98% with the optimum cloud point extraction conditions (concentration of Tween-20, 138 g/L; mass of anhydrous sodium sulfate, 0.75 g; equilibration temperature, 65°C; equilibration time, 30 min). To decrease the detection limits, further work about the organic solvent, shaking time, and ultrasonic parameters was carried. When the spiked level was 10-100 μg/kg, the average addition standard recovery was 70.40-106.91% with the optimum cloud point extraction and enrichment conditions (optimum cloud point extraction conditions; volume of cyclohexane, 30 mL; shaking time, 20 min; time of ultrasonic, 20 min; temperature of ultrasonic bath, 45°C).

Analysis of sulfonamides in soil, sediment, and sludge based on dynamic microwave-assisted micellar extraction

A green and high-throughput analytical method was described for the simultaneous determination of ten sulfonamides (SAs) from soil, sediment, and sludge in northeast China. None of potentially hazardous organic solvents was used in the whole sample preparation procedure, and the total preparation time of 15 samples was about 18 min. The limits of detection for the SAs were in the range of 0.42-0.68 ng g(-1). The intra-day and inter-day precisions, expressed by the relative standard deviation, were below 7 %. Under the optimum conditions, the recoveries of ten SAs were between 69.7 and 102.7 %. The proposed method was successfully applied to analyze the SAs residues in agricultural soils, river sediments, and sewage sludge. SAs were found at the levels of 1.40-2.31 ng g(-1) and 3.77-29.29 ng g(-1) in the sediments and sludge, respectively. The aging effect of spiked soil samples on the SAs recoveries was examined, and the results demonstrate that eight SAs could persist in five soils for 3 months. Compared with the traditional method, the proposed method could reduce the consumption of the organic solvent, shorten the sample preparation time, and increase the sample throughput.

Determination of polycyclic aromatic hydrocarbons using lab on valve dispersive liquid-liquid microextraction coupled to high performance chromatography

In this work, dispersive liquid-liquid microextraction (DLLME) method was applied for high performance liquid chromatography (HPLC) determination of 15 PAHs in aqueous matrices.The extraction procedure was automated using a system of multisyringe flow injection analysis coupled to HPLC instrument with fluorescence detector. Factors affecting the extraction process, such as type and volume of extraction and dispersive solvent, extraction time and centrifugation step were investigated thoroughly and optimized utilizing factorial design. The best recovery was achieved using 100 µL of trichloroethylene as the extraction solvent and 900 µL of acetonitrile as the dispersive solvent.The results showed that extraction time has no effect on the recovery of PAHs. The enrichment factors of PAHs were in the range of 86-95 with limits of detection of 0.02-0.6 µg L(-1). The linearity was 0.2-600 µg L(-1) for different PAHs. The relative standard deviation (RSD) for intra- and inter-day of extraction of PAHs were in the range of 1.6-4.7 and 2.1-5.3, respectively, for five measurements.The developed method was used to assess the occurrence of 15 PAHs in tap water, rain waters and river surface waters samples.

Development of a cloud point extraction and spectrophotometry-based microplate method for the determination of nitrite in human urine and blood

A novel and simple method for the sensitive determination of trace amounts of nitrite in human urine and blood has been developed by combination of cloud point extraction (CPE) and microplate assay. The method is based on the Griess reaction and the reaction product is extracted into nonionic surfactant Triton-X114 using CPE technique. In this study, decolorization treatment of urine and blood was applied to overcome the interference of matrix and enhance the sensitivity of nitrite detection. Multi-sample can be simultaneously detected thanks to a 96-well microplate technique. The effects of different operating parameters such as type of decolorizing agent, concentration of surfactant (Triton X-114), addition of (NH4)2SO4, extraction temperature and time, interfering elements were studied and optimum conditions were obtained. Under the optimum conditions, a linear calibration graph was obtained in the range of 10-400 ng mL(-1) of nitrite with limit of detection (LOD) of 2.5 ng mL(-1). The relative standard deviation (RSD) for determination of 100 ng mL(-1) of nitrite was 2.80%. The proposed method was successfully applied for the determination of nitrite in the urine and blood samples with recoveries of 92.6-101.2%.

Mixed micelles-mediated dephenolisation of table olive processing's wastewaters

Olive processing wastewaters account for highly pollutant agro-industrial effluents. Their phenolic compounds are responsible for their toxicity. Those natural compounds have to be degraded or recovered before any discharge into the environment. This investigation deals with the extraction and concentration of the phenolic compounds into an aqueous phase using a mixture of nonionic/anionic surfactants. A synergistic effect for the extraction of the natural phenolic compounds was observed when Genapol X-80 was combined with sodium dodecyl sulphate (SDS). For the tested Genapol X-80 concentration (1-5%), a minimum concentration of 2.5 mM SDS was demonstrated to be necessary to reach maximum extraction rates. The extraction efficiencies were only slightly affected by temperatures between 20 and 50 °C. However, the recovery rate of the phenolic compounds increased with the augmentation of the contact time. The pH has also been found to greatly influence the extraction of the phenolic compounds and the coacervate volume fraction. At optimal conditions, the coacervate phase was enriched up to four times whereas the maximum reduction of the phenolic content in the diluted phase reached more than 40% in one step extraction.

Cloud Point Extraction of Polycyclic Aromatic Hydrocarbons in Aqueous Solution with Nonionic Surfactants

A cloud point extraction (CPE) process using the two nonionic surfactants, Tergitol 15-S-9 and Tergitol 15-S-7, mixtures of secondary ethoxylated alcohols, to extract selected polycyclic aromatic hydrocarbons (PAHs) from aqueous solutions at 25°C was investigated. Cloud point temperatures (CPTs) of selected nonionic surfactants were studied against the effect of added electrolytes on their cloud points. Sodium iodide could increase the cloud points of selected nonionic surfactants, i.e., the salt-in effect, whereas sodium chloride, sodium phosphate and sodium sulfate could decrease the cloud point, i.e., the salt-out effect. Cloud point temperatures (CPTs) of these micellar solutions were regulated and reduced enough with addition of sodium phosphate and sodium sulfate, so that the cloud point extraction (CPE) process could be facilitated at 25°C. It was found that a higher preconcentration factor could be achieved in the micellar solution having a lower surfactant concentration. The average preconcentration factor was also discussed as a function of surfactant concentration used in the CPE process.

Antioxidant Activity and Thermal Stability of Oleuropein and Related Phenolic Compounds of Olive Leaf Extract after Separation and Concentration by Salting-Out-Assisted Cloud Point Extraction

A fast, clean, energy-saving, non-toxic method for the stabilization of the antioxidant activity and the improvement of the thermal stability of oleuropein and related phenolic compounds separated from olive leaf extract via salting-out-assisted cloud point extraction (CPE) was developed using Tween 80. The process was based on the decrease of the solubility of polyphenols and the lowering of the cloud point temperature of Tween 80 due to the presence of elevated amounts of sulfates (salting-out) and the separation from the bulk solution with centrifugation. The optimum conditions were chosen based on polyphenols recovery (%), phase volume ratio (V_s/V_w) and concentration factor (F_c). The maximum recovery of polyphenols was in total 95.9%; V_s/V_w was 0.075 and F_c was 15 at the following conditions: pH 2.6, ambient temperature (25 °C), 4% Tween 80 (w/v), 35% Na₂SO₄ (w/v) and a settling time of 5 min. The total recovery of oleuropein, hydroxytyrosol, luteolin-7-O-glucoside, verbascoside and apigenin-7-O-glucoside, at optimum conditions, was 99.8%, 93.0%, 87.6%, 99.3% and 100.0%, respectively. Polyphenolic compounds entrapped in the surfactant-rich phase (V_s) showed higher thermal stability (activation energy (Ea) 23.8 kJ/mol) compared to non-entrapped ones (Ea 76.5 kJ/mol). The antioxidant activity of separated polyphenols remained unaffected as determined by the 1,1-diphenyl-2-picrylhydrazyl method.

Analysis of Mogroside V in Siraitia grosvenorii with micelle-mediated cloud-point extraction

INTRODUCTION

Mogroside V is the main effective ingredient of Siraitia grosvenorii used as a natural sweet food as well as a traditional Chinese medicine. The sample pre-treatment prior to chromatographic analysis requires large amounts of toxic organic solvents and is time consuming.

OBJECTIVE

To develop an effective and simple method for extracting and determining mogroside V of Siraitia grosvenorii.

METHODS

Mogroside V was extracted and preconcentrated by micelle-mediated cloud-point extraction with nonionic surfactant isotridecyl poly (ethylene glycol) ether (Genapol® X-080). The obtained solutions containing mogroside V were analysed by high-performance liquid chromatography (HPLC) with ultraviolet (UV) detection. The chromatographic separation was performed on a C18 -column using gradient elution with acetonitrile and water at 203 nm.

RESULTS

The cloud-point extraction yield was 80.7% while the pre-concentration factor was about 10.8. The limit of detection was 0.75 µg/mL and the limit of quantification was 2 µg/mL. The relative standard deviations for intra- and interday precisions of mogroside V were less than 8.68% and 5.78%, respectively, and the recoveries were between 85.1% and 103.6%.

CONCLUSION

The HPLC-UV method based on micelle-mediated cloud-point extraction for determination mogroside V in Siraitia grosvenorii was environmentally friendly, simple and sensitive.

Evaluation of the suitability of low hazard surfactants for the separation of phenols and carotenoids from red-flesh orange juice and olive mill wastewater using cloud point extraction

Natural antioxidants derived from plant sources attract considerable scientific interest. While classic extraction methods consume high volumes of toxic organic solvents, cloud point extraction requires surfactant not exceeding 15% of the waste volume. In preliminary tests, the suitability of various low hazard surfactants (Span 20, PEG 400, Tween 80 and 20) was explored for separation of phenols and carotenoids from olive mill wastewater and red-flesh orange juice. Tween 80 showed the highest recovery and further applied to the next experiments. The most appropriate surfactant concentrations were 5% (for olive mill wastewater) and 7% (for orange juice) as indicated by recovery % and the rest cloud point extraction parameters (analyte concentration, concentration factor, and phase volume ratio). A double step CPE with 5% + 5% of Tween 80 recovered up to 94.4% of the total phenols from olive mill wastewater, while a 7% + 7% of Tween 80 recovered up to 72.4% of the total carotenoids from orange juice. Evaluation of the final effects and extraction efficiency of single and double step cloud point extraction shows that double step scheme seems to be preferable in both cases. Finally, phenols and carotenoids recovered by Tween 80 maintained high antiradical activity (DPPH test).