Biomaterials integrated with electronic elements: en route to bioelectronics

Pinaceae Pine Resins (Black Pine, Shore Pine, Rosin, and Baltic Amber) as Natural Dielectrics for Low Operating Voltage, Hysteresis-Free, Organic Field Effect Transistors

Four pinaceae pine resins analyzed in this study: black pine, shore pine, Baltic amber, and rosin demonstrate excellent dielectric properties, outstanding film forming, and ease of processability from ethyl alcohol solutions. Their trap-free nature allows fabrication of virtually hysteresis-free organic field effect transistors operating in a low voltage window with excellent stability under bias stress. Such green constituents represent an excellent choice of materials for applications targeting biocompatibility and biodegradability of electronics and sensors, within the overall effort of sustainable electronics development and environmental friendliness.

Stimuli-Responsive DNA-Based Hydrogels on Surfaces for Switchable Bioelectrocatalysis and Controlled Release of Loads

The assembly of enzyme [glucose oxidase (GOx)]-loaded stimuli-responsive DNA-based hydrogels on electrode surfaces, and the triggered control over the stiffness of the hydrogels, provides a means to switch the bioelectrocatalytic functions of the hydrogels. One system includes the assembly of GOx-loaded, pH-responsive, hydrogel matrices cross-linked by two cooperative nucleic acid motives comprising permanent duplex nucleic acids and "caged" i-motif pH-responsive duplexes. Bioelectrocatalyzed oxidation of glucose leads to the formation of gluconic acid that acidifies the hydrogel resulting in the separation of the i-motif constituents and lowering the hydrogel stiffness. Loading of the hydrogel matrices with insulin results in the potential-triggered, glucose concentration-controlled, switchable release of insulin from the hydrogel-modified electrodes. The switchable bioelectrocatalyzed release of insulin is demonstrated in the presence of ferrocenemethanol as a diffusional electron mediator or by applying an electrically wired integrated matrix that includes ferrocenyl-modified GOx embedded in the hydrogel. The second GOx-loaded, stimuli-responsive, DNA-based hydrogel matrix associated with the electrode includes a polyacrylamide hydrogel cooperatively cross-linked by duplex nucleic acids and "caged" G-quadruplex-responsive duplexes. The hydrogel matrix undergoes K+-ions/crown ether-triggered stiffness changes by the cyclic K+-ion-stimulated formation of G-quadruplexes (lower stiffness) and the crown ether-induced separation of the G-quadruplexes (higher stiffness). The hydrogel matrices demonstrate switchable bioelectrocatalytic functions guided by the stiffness properties of the hydrogels.

Review of Bacterial Nanocellulose-Based Electrochemical Biosensors: Functionalization, Challenges, and Future Perspectives

Electrochemical biosensing devices are known for their simple operational procedures, low fabrication cost, and suitable real-time detection. Despite these advantages, they have shown some limitations in the immobilization of biochemicals. The development of alternative materials to overcome these drawbacks has attracted significant attention. Nanocellulose-based materials have revealed valuable features due to their capacity for the immobilization of biomolecules, structural flexibility, and biocompatibility. Bacterial nanocellulose (BNC) has gained a promising role as an alternative to antifouling surfaces. To widen its applicability as a biosensing device, BNC may form part of the supports for the immobilization of specific materials. The possibilities of modification methods and in situ and ex situ functionalization enable new BNC properties. With the new insights into nanoscale studies, we expect that many biosensors currently based on plastic, glass, or paper platforms will rely on renewable platforms, especially BNC ones. Moreover, substrates based on BNC seem to have paved the way for the development of sensing platforms with minimally invasive approaches, such as wearable devices, due to their mechanical flexibility and biocompatibility.

Conductive Materials with Elaborate Micro/Nanostructures for Bioelectronics

Bioelectronics, an emerging field with the mutual penetration of biological systems and electronic sciences, allows the quantitative analysis of complicated biosignals together with the dynamic regulation of fateful biological functions. In this area, the development of conductive materials with elaborate micro/nanostructures has been of great significance to the improvement of high-performance bioelectronic devices. Thus, here, a comprehensive and up-to-date summary of relevant research studies on the fabrication and properties of conductive materials with micro/nanostructures and their promising applications and future opportunities in bioelectronic applications is presented. In addition, a critical analysis of the current opportunities and challenges regarding the future developments of conductive materials with elaborate micro/nanostructures for bioelectronic applications is also presented.

Recent progress in nanomaterial-based bioelectronic devices for biocomputing system

Bioelectronic devices have received the massive attention because of their huge potential to develop the core electronic components for biocomputing system. Up to now, numerous bioelectronic devices have been reported such as biomemory and biologic gate by employment of biomolecules including metalloproteins and nucleic acids. However, the intrinsic limitations of biomolecules such as instability and low signal production hinder the development of novel bioelectronic devices capable of performing various novel computing functions. As a way to overcome these limitations, nanomaterials have the great potential and wide applicability to grant and extend the electronic functions, and improve the inherent properties from biomolecules. Accordingly, lots of nanomaterials including the conductive metal, graphene, and transition metal dichalcogenide nanomaterials are being used to develop the remarkable functional bioelectronic devices like the multi-bit biomemory and resistive random-access biomemory. This review discusses the nanomaterial-based superb bioelectronic devices including the biomemory, biologic gates, and bioprocessors. In conclusion, this review will provide the interdisciplinary information about utilization of various novel nanomaterials applicable for biocomputing system.

A Light-Driven Integrated Bio-Capacitor with Single Nano-Channel Modulation

Bioelectronics, an emerging discipline formed by the biology and electronic information disciplines, has maintained a state of rapid development since its birth. Amongst the various functional bioelectronics materials, bacteriorhodopsin (bR), with its directional proton pump function and favorable structural stability properties, has drawn wide attention. The main contents of the paper are as follows: Inspired by the capacitive properties of natural protoplast cell membranes, a new bio-capacitor based on bR and artificial nanochannels was constructed. As a point of innovation, microfluidic chips were integrated into our device as an ion transport channel, which made the bio-capacitor more stable. Meanwhile, a single nanopore structure was integrated to improve the accuracy of the device structure. Experiments observed that the size of the nanopore affected the ion transmission rate. Consequently, by making the single nanopore’s size change, the photocurrent duration time (PDT) of bR was effectively regulated. By using this specific phenomenon, the original transient photocurrent was successfully transformed into a square-like wave.

Impedance Spectroscopy and ac Conductivity in Ba0.5Sr0.5TiO3-Ca10(PO4)6(OH)2 Ceramic Composites: An Electrical Approach to Unveil Biocomposites

We report bioceramic composites of varying concentrations of Ba_0.5Sr_0.5TiO₃ (BST) and Ca₁₀(PO₄)₆(OH)₂ (HAP) for the analysis of electrical properties. The motivation is to predict the suitability of the composites for bio-electrets or the practical possibility in designing electro-active scaffolds. X-ray diffraction (XRD) and field-emission scanning electron microscopy (FESEM) are used to analyze the microstructural evolution of the composites. A systematic variation in the grain and crystallite sizes is noticed from the FESEM and XRD, along with the presence of Sr₅(PO₄)₃(OH) (SAP). The temperature and frequency variations of the dielectric properties of the composites are studied. Modeling of the dielectric properties with the microstructural properties and at. % of the monolith BST is presented. Cole-Cole formalism is adopted to model the electrical behavior of the synthesized composites. Furthermore, the ac conductivity analysis reveals that Mott's variable range hopping (VRH) conduction is the most appropriate formalism that successfully describes the conduction process. The established Mott's VRH is also related to the polarization mechanisms active in the specimens. Our study projects a correlation between the electrical and biological properties by predicting the protein adsorption behavior from the perspective of impedance spectroscopy.

How stable are the collagen and ferritin proteins for application in bioelectronics?

One major obstacle in development of biomolecular electronics is the loss of function of biomolecules upon their surface-integration and storage. Although a number of reports on solid-state electron transport capacity of proteins have been made, no study on whether their functional integrity is preserved upon surface-confinement and storage over a long period of time (few months) has been reported. We have investigated two specific cases—collagen and ferritin proteins, since these proteins exhibit considerable potential as bioelectronic materials as we reported earlier. Since one of the major factors for protein degradation is the proteolytic action of protease, such studies were made under the action of protease, which was either added deliberately or perceived to have entered in the reaction vial from ambient environment. Since no significant change in the structural characteristics of these proteins took place, as observed in the circular dichroism and UV-visible spectrophotometry experiments, and the electron transport capacity was largely retained even upon direct protease exposure as revealed from the current sensing atomic force spectroscopy experiments, we propose that stable films can be formed using the collagen and ferritin proteins. The observed protease-resistance and robust nature of these two proteins support their potential application in bioelectronics.

Towards the development of flexible carbon nanotube–parafilm nanocomposites and their application as bioelectrodes

Soft, flexible and conductive interfaces, which can be used as electrode materials integrated with commercial electronic components and the human body for continuous monitoring of different analytes are in high demand in wearable electronics.

Recent Advances in Biomolecule-Nanomaterial Heterolayer-Based Charge Storage Devices for Bioelectronic Applications

With the acceleration of the Fourth Industrial Revolution, the development of information and communications technology requires innovative information storage devices and processing devices with low power and ultrahigh stability. Accordingly, bioelectronic devices have gained considerable attention as a promising alternative to silicon-based devices because of their various applications, including human-body-attached devices, biomaterial-based computation systems, and biomaterial-nanomaterial hybrid-based charge storage devices. Nanomaterial-based charge storage devices have witnessed considerable development owing to their similarity to conventional charge storage devices and their ease of applicability. The introduction of a biomaterial-to-nanomaterial-based system using a combination of biomolecules and nanostructures provides outstanding electrochemical, electrical, and optical properties that can be applied to the fabrication of charge storage devices. Here, we describe the recent advances in charge storage devices containing a biomolecule and nanoparticle heterolayer including (1) electrical resistive charge storage devices, (2) electrochemical biomemory devices, (3) field-effect transistors, and (4) biomemristors. Progress in biomolecule-nanomaterial heterolayer-based charge storage devices will lead to unprecedented opportunities for the integration of information and communications technology, biotechnology, and nanotechnology for the Fourth Industrial Revolution.

Switchable Graphene-Based Bioelectronics Interfaces

Integration of materials acts as a bridge between the electronic and biological worlds, which has revolutionized the development of bioelectronic devices. This review highlights the rapidly emerging field of switchable interface and its bioelectronics applications. This review article highlights the role and importance of two-dimensional (2D) materials, especially graphene, in the field of bioelectronics. Because of the excellent electrical, optical, and mechanical properties graphene have promising application in the field of bioelectronics. The easy integration, biocompatibility, mechanical flexibility, and conformity add impact in its use for the fabrication of bioelectronic devices. In addition, the switchable behavior of this material adds an impact on the study of natural biochemical processes. In general, the behavior of the interfacial materials can be tuned with modest changes in the bioelectronics interface systems. It is also believed that switchable behavior of materials responds to a major change at the nanoscale level by regulating the behavior of the stimuli-responsive interface architecture.

Carbon Nanotube/Conducting Polymer Hybrid Nanofibers as Novel Organic Bioelectronic Interfaces for Efficient Removal of Protein-Bound Uremic Toxins

Protein-bound uremic toxins (PBUTs) can cause noxious effects in patients suffering from renal failure as a result of inhibiting the transport of proteins and inducing their structural modification. They are difficult to remove through standard hemodialysis (HD) treatment. Herein, we report an organic bioelectronic HD device system for the effective removal of PBUTs through electrically triggered dissociation of protein-toxin complexes. To prepare this system, we employed electrospinning to fabricate electrically conductive quaternary composite nanofiber mats-comprising multiwalled carbon nanotubes (MWCNTs), poly(3,4-ethylenedioxythiophene):polystyrenesulfonate (PEDOT:PSS), poly(ethylene oxide) (PEO), and (3-glycidyloxypropyl)trimethoxysilane (GOPS)-on conventional polyethersulfone (PES) dialysis membranes. These composite nanofiber platforms exhibited (i) long-term water resistance (due to cross-linking among PSS, PEO, and GOPS), (ii) high adhesion strength on the PES membrane (due to GOPS functioning as an adhesion promoter), (iii) enhanced electrical properties [due to the MWCNTs and PEDOT:PSS promoting effective electrical stimulation (ES) operation in devices containing bioelectronic interfaces (BEI)], and (iv) good anticoagulant ability and negligible hemolysis of red blood cells. We employed this organic BEI electronic system as a novel single-membrane HD device to study the removal efficiency of four kinds of uremic toxins [p-cresol (PC), indoxyl sulfate, and hippuric acid as PBUTs; creatinine as a non-PBUT] as well as the effects of ES on lowering the protein binding ratio. Our organic BEI devices provided a high rate of removal of PC with low protein loss after 4 h of a simulated dialysis process. It also functioned with low complement activation, low contact activation levels, and lower amounts of platelet adsorption, suggesting great suitability for use in developing next-generation bioelectronic medicines for HD.

Development of Bioelectronic Devices Using Bionanohybrid Materials for Biocomputation System

Bioelectronic devices have been researched widely because of their potential applications, such as information storage devices, biosensors, diagnosis systems, organism-mimicking processing system cell chips, and neural-mimicking systems. Introducing biomolecules including proteins, DNA, and RNA on silicon-based substrates has shown the powerful potential for granting various functional properties to chips, including specific functional electronic properties. Until now, to extend and improve their properties and performance, organic and inorganic materials such as graphene and gold nanoparticles have been combined with biomolecules. In particular, bionanohybrid materials that are composed of biomolecules and other materials have been researched because they can perform core roles of information storage and signal processing in bioelectronic devices using the unique properties derived from biomolecules. This review discusses bioelectronic devices related to computation systems such as biomemory, biologic gates, and bioprocessors based on bionanohybrid materials with a selective overview of recent research. This review contains a new direction for the development of bioelectronic devices to develop biocomputation systems using biomolecules in the future.

A Review on Bacteriorhodopsin-Based Bioelectronic Devices

Bacteriorhodopsin protein extracted from Halobacterium salinarum is widely used in many biohybrid electronic devices and forms a research subject known as bioelectronics, which merges biology with electronic technique. The specific molecule structure and components of bR lead to its unique photocycle characteristic, which consists of several intermediates (bR, K, L, M, N, and O) and results in proton pump function. In this review, working principles and properties of bacteriorhodopsin are briefly introduced, as well as bR layer preparation method. After that, different bR-based devices divided into photochemical and photoelectric applications are shown. Finally, outlook and conclusions are drawn to inspire new design of high-performance bR-based biohybrid electronic devices.

Microbial nanowires - Electron transport and the role of synthetic analogues

Electron transfer is central to cellular life, from photosynthesis to respiration. In the case of anaerobic respiration, some microbes have extracellular appendages that can be utilised to transport electrons over great distances. Two model organisms heavily studied in this arena are Shewanella oneidensis and Geobacter sulfurreducens. There is some debate over how, in particular, the Geobacter sulfurreducens nanowires (formed from pilin nanofilaments) are capable of achieving the impressive feats of natural conductivity that they display. In this article, we outline the mechanisms of electron transfer through delocalised electron transport, quantum tunnelling, and hopping as they pertain to biomaterials. These are described along with existing examples of the different types of conductivity observed in natural systems such as DNA and proteins in order to provide context for understanding the complexities involved in studying the electron transport properties of these unique nanowires. We then introduce some synthetic analogues, made using peptides, which may assist in resolving this debate. Microbial nanowires and the synthetic analogues thereof are of particular interest, not just for biogeochemistry, but also for the exciting potential bioelectronic and clinical applications as covered in the final section of the review.

STATEMENT OF SIGNIFICANCE

Some microbes have extracellular appendages that transport electrons over vast distances in order to respire, such as the dissimilatory metal-reducing bacteria Geobacter sulfurreducens. There is significant debate over how G. sulfurreducens nanowires are capable of achieving the impressive feats of natural conductivity that they display: This mechanism is a fundamental scientific challenge, with important environmental and technological implications. Through outlining the techniques and outcomes of investigations into the mechanisms of such protein-based nanofibrils, we provide a platform for the general study of the electronic properties of biomaterials. The implications are broad-reaching, with fundamental investigations into electron transfer processes in natural and biomimetic materials underway. From these studies, applications in the medical, energy, and IT industries can be developed utilising bioelectronics.

Negative Differential Resistance Behavior of the Iron Storage Protein Ferritin

Realization of useful nanometer length scale devices in which metalloproteins are junction-confined in a distinct molecular arrangement for generating practical electronic signals (e.g., in bioelectronic switch configuration) is elusive till date. This is mostly due to difficulties in observing an electronically appropriate signal (i.e., reproducible and controllable), when studied under junction-assembled condition. A useful "ON"-"OFF" behavior, based on the negative differential resistance (NDR) peak characteristics in the current-voltage response curves, acquired using metal-insulator-metal (MIM) configuration, has been observed only in the case of a few proteins, namely, azurin, cytochrome c, bacteriorhodopsin, so far. The case of NDR in ferritin, an iron storage protein having a semiconducting iron core consisting of few thousands of iron atoms connected in an oxide network, has not been studied in the MIM configuration where single (or a few) molecule(s) are junction-trapped, for example, as in the case of local probe configuration of scanning probe microscopy. The present study by scanning tunneling microscopy (STM), using the naturally occurring iron-containing ferritin (human liver), as well as different iron-loaded ferritins, provides clear indication of the capability of ferritins to be NDR capable, at varying sweep conditions. As ferritin can be tailor-made in a structurally conserved manner, metal core-reconstituted ferritins, that is, Mn(III)-ferritin, Cu(II)-ferritin, and Ag-ferritin, were prepared. A correlation between the NDR peak signatures, as observed in the respective current-voltage response curves of these reconstituted ferritins, and the nature of the metal core is demonstrated. In support of our earlier proposition, here, we affirm that the ferritin protein behaves as a conductor-insulator (metal core-polypeptide shell) composite, where the overall electronic structure of the material can alter as a function of the nature of the conducting filler placed inside the insulated matrix.

Vibrational Changes Induced by Electron Transfer in Surface Bound Azurin Metalloprotein Studied by Tip-Enhanced Raman Spectroscopy and Scanning Tunneling Microscopy

The copper protein azurin, due to the peculiar coupling of its optical and vibronic properties with electron transfer (ET) and its biorecognition capabilities, is a very promising candidate for bioelectronic, bio-optoelectronic and biosensor applications. However, a complete understanding of the fundamental processes relating azurin ET and its optical and vibronic characteristics with the charge transport mechanisms occurring in proteins bound to a conductive surface, the typical scenario for a biosensor or bioelectronic component, is still lacking. We studied azurin proteins bound to a gold electrode surface by scanning tunneling microscopy combined with tip-enhanced Raman spectroscopy (STM-TERS). Robust TER spectra were obtained, and the protein's vibronic response under optical excitation in resonance with its ligand-to-metal charge transfer band was found to be affected by the tunneling parameters, indicating a direct involvement of the active site vibrations in the electron transport process.

An Integrated Redox Cycling for Electrochemical Enzymatic Signal Enhancement

Highly sensitive analytical methods for the detection of proteins are still an urgent demand in early medical diagnosis and the discovery of biomarkers with ultralow abundance. Here an integrated electrochemical-chemical-enzymatic redox cycling is designed for significant enhancement of electrochemical enzymatic signal in biorecognition. This strategy efficiently utilizes the high specificity of the outersphere to innersphere redox reaction to mediate the enzymatic redox cycling with the nonenzymatic redox cycling. The oxygenation activity of tyrosinase as a label of the biorecognition event ensures low background and generates outersphere-reaction-philic/innersphere-reaction-philic redox couples, which leads to 13 300× amplification of electrochemical signal. The mediation of nonenzymatic redox cycling in the integrated system produces a 14-fold improved ratio of signal to background. The practicality of the proposed approach with clinical samples demonstrates its potential in clinical diagnostic and therapeutic monitoring. This work opens a new avenue to design novel signal amplification strategies for ultrasensitive bioanalysis.

Site-Specific One-to-One Click Coupling of Single Proteins to Individual Carbon Nanotubes: A Single-Molecule Approach

We report the site-specific coupling of single proteins to individual carbon nanotubes (CNTs) in solution and with single-molecule control. Using an orthogonal Click reaction, Green Fluorescent Protein (GFP) was engineered to contain a genetically encoded azide group and then bound to CNT ends in different configurations: in close proximity or at longer distances from the GFP's functional center. Atomic force microscopy and fluorescence analysis in solution and on surfaces at the single-protein level confirmed the importance of bioengineering optimal protein attachment sites to achieve direct protein-nanotube communication and bridging.

Nanoscale On-Silico Electron Transport via Ferritins

Silicon is a solid-state semiconducting material that has long been recognized as a technologically useful one, especially in electronics industry. However, its application in the next-generation metalloprotein-based electronics approaches has been limited. In this work, the applicability of silicon as a solid support for anchoring the iron-storage protein ferritin, which has a semiconducting iron nanocore, and probing electron transport via the ferritin molecules trapped between silicon substrate and a conductive scanning probe has been investigated. Ferritin protein is an attractive bioelectronic material because its size (X-ray crystallographic diameter ∼12 nm) should allow it to fit well in the larger tunnel gaps (>5 nm), fabrication of which is relatively more established, than the smaller ones. The electron transport events occurring through the ferritin molecules that are covalently anchored onto the MPTMS-modified silicon surface could be detected at the molecular level by current-sensing atomic force spectroscopy (CSAFS). Importantly, the distinct electronic signatures of the metal types (i.e., Fe, Mn, Ni, and Au) within the ferritin nanocore could be distinguished from each other using the transport band gap analyses. The CSAFS measurements on holoferritin, apoferritin, and the metal core reconstituted ferritins reveal that some of these ferritins behave like n-type semiconductors, while the others behave as p-type semiconductors. The band gaps for the different ferritins are found to be within 0.8 to 2.6 eV, a range that is valid for the standard semiconductor technology (e.g., diodes based on p-n junction). The present work indicates effective on-silico integration of the ferritin protein, as it remains functionally viable after silicon binding and its electron transport activities can be detected. Potential use of the ferritin-silicon nanohybrids may therefore be envisaged in applications other than bioelectronics, too, as ferritin is a versatile nanocore-containing biomaterial (for storage/transport of metals and drugs) and silicon can be a versatile nanoscale solid support (for its biocompatible nature).

DNA-Directed Self-Assembly of Highly Ordered and Dense Single-Walled Carbon Nanotube Arrays

Single-walled carbon nanotubes (SWNT or CNT) have unique and well-known high-performance material properties that can enable revolutionary increases in the performance of electronic devices and architectures. However, fabrication of large-scale SWNT-based ICs is an enormously challenging, unsolved problem, and self-assembly is likely needed for critical steps. Over the past several years, methods have been introduced to created ordered carbon nanotube structures using DNA guided self-assembly. In this chapter, we briefly review the challenges involved in using DNA to assemble SWNT nanostructures, and then give detailed methods to assemble dense, aligned SWNT arrays. In particular, we discuss the preparation of DNA wrapped single-walled nanotubes (DNA-CNTs) using commercial carbon nanotube products that are suitable for electronics applications. Then, we discuss methods to characterize DNA-CNTs using fluid mode atomic force microscopy (AFM). Finally, we give detailed procedures for assembly of DNA-CNTs into dense parallel arrays via linker induced surface assembly (LISA).

Electro-molecular Assembly: Electrical Writing of Information into an Erasable Polysaccharide Medium

We report that information can be written into an erasable hydrogel medium by precisely imposing controlled electrical signals that trigger supramolecular self-assembly. We prepare the medium from a blend of two stimuli-responsive self-assembling polysaccharides agarose (thermally responsive) and chitosan (pH-responsive). Upon cooling the blend, agarose forms the hydrogel medium while the embedded chitosan chains can be induced to self-assemble in response to imposed pH cues. Importantly, these triggering pH-cues can be imposed electrically (by inserted electrodes) enabling complex messages (e.g., self-assembled multilayers) to be written within the hydrogel medium. The reversibility of these self-assembly mechanisms allow the written information, and the medium itself, to be erased. These physicochemical properties enable this dual responsive medium to encrypt information, while the responsiveness of this structural information and the biocompatibility of the medium suggest uses for accessing/reporting information in diverse life science applications, such as foods, cosmetics, medicine, and the environment.

Control of electrochemical signals from quantum dots conjugated to organic materials by using DNA structure in an analog logic gate

Various bio-logic gates have been studied intensively to overcome the rigidity of single-function silicon-based logic devices arising from combinations of various gates. Here, a simple control tool using electrochemical signals from quantum dots (QDs) was constructed using DNA and organic materials for multiple logic functions. The electrochemical redox current generated from QDs was controlled by the DNA structure. DNA structure, in turn, was dependent on the components (organic materials) and the input signal (pH). Independent electrochemical signals from two different logic units containing QDs were merged into a single analog-type logic gate, which was controlled by two inputs. We applied this electrochemical biodevice to a simple logic system and achieved various logic functions from the controlled pH input sets. This could be further improved by choosing QDs, ionic conditions, or DNA sequences. This research provides a feasible method for fabricating an artificial intelligence system.

A biomemory chip composed of a myoglobin/CNT heterolayer fabricated by the protein-adsorption-precipitation-crosslinking (PAPC) technique

In this study, a biomemory chip consisting of a myoglobin/carbon nanotube (CNT) heterolayer is fabricated via the protein-adsorption-precipitation-crosslinking (PAPC) technique for electrochemical signal enhancement, long-term stability, and improved memory function. The PAPC technique is used to fabricate a myoglobin/CNT heterolayer with a CNT core and a high-density myoglobin-shell structure to achieve efficient heterolayer formation and improved performance of the heterolayer. The fabricated myoglobin/CNT heterolayer is immobilized onto a Au substrate through a chemical linker. The surface morphology of the deposited heterolayer is investigated via transmission electron microscopy and atomic force microscopy. The redox properties of the myoglobin/CNT heterolayer are investigated by cyclic voltammetry, and the memory function of the heterolayer, including the "write step" and "erase step," is measured by chronoamperometry. Compared with the myoglobin monolayer without CNT, the myoglobin/CNT heterolayer fabricated by the PAPC technique exhibits greater electrochemical signal enhancement, long-term stability at room temperature, and improved memory function. The results suggest that the proposed myoglobin/CNT heterolayer produced via the PAPC technique can be applied as a platform for bioelectronic devices to achieve improved signal intensity and durability.

The Photosystem II D1-K238E mutation enhances electrical current production using cyanobacterial thylakoid membranes in a bio-photoelectrochemical cell

The conversion of solar energy (SEC) to storable chemical energy by photosynthesis has been performed by photosynthetic organisms, including oxygenic cyanobacteria for over 3 billion years. We have previously shown that crude thylakoid membranes from the cyanobacterium Synechocytis sp. PCC 6803 can reduce the electron transfer (ET) protein cytochrome c even in the presence of the PSII inhibitor DCMU. Mutation of lysine 238 of the Photosystem II D1 protein to glutamic acid increased the cytochrome reduction rates, indicating the possible position of this unknown ET pathway. In this contribution, we show that D1-K238E is rather unique, as other mutations to K238, or to other residues in the same vicinity, are not as successful in cytochrome c reduction. This observation indicates the sensitivity of ET reactions to minor changes. As the next step in obtaining useful SEC from biological material, we describe the use of crude Synechocystis membranes in a bio-photovoltaic cell containing an N-acetyl cysteine-modified gold electrode. We show the production of significant current for prolonged time durations, in the presence of DCMU. Surprisingly, the presence of cytochrome c was not found to be necessary for ET to the bio-voltaic cell.

Impaired coronary microvascular and left ventricular diastolic function in patients with inflammatory bowel disease

BACKGROUND AND AIM

Increased incidence of coronary vascular events in patients with inflammatory bowel disease (IBD) is known. However, the association between coronary microvascular function and IBD has not been fully defined. We aimed to investigate whether coronary flow reserve (CFR) and left ventricular diastolic function were impaired in IBD patients.

METHODS

Seventy-two patients with IBD (36 patients with ulcerative colitis [UC] and 36 Crohn's disease [CD]) were registered. Each subject was evaluated after a minimum 15-day attack-free period. For the control group, 36 age- and sex-matched healthy volunteers were included into the study. IBD clinical disease activity in UC was assessed by the Truelove-Witts Index (TWAS) and in CD by the Crohn's Disease Activity Index (CDAI). In each subject, CFR was measured through transthoracic Doppler echocardiography.

RESULTS

Compared to the controls, the CD group and UC group had significantly higher high-sensitivity C-reactive protein (hs-CRP) and erythrocyte sedimentation rate. Baseline diastolic peak flow velocity (DPFV) of the left anterior descending artery (LAD) was significantly higher in the IBD group (24.1±3.9 vs. 22. 4±2.9, p<0.05), and hyperemic DPFV (56.1±12.5 vs. 70.6±15.3, p<0.05) and CFR (2.34±0.44 vs. 3.14±0.54, p<0.05) were significantly lower in the IBD group than in the control group. In stepwise linear regression analysis, hs-CRP and lateral Em/Am ratio were independently correlated with CFR.

CONCLUSION

CFR, reflecting coronary microvascular function, is impaired in patients with IBD. CFR and left ventricular diastolic function parameters are well correlated with hs-CRP.

A comparison of polymer substrates for photolithographic processing of flexible bioelectronics

Flexible bioelectronics encompass a new generation of sensing devices, in which controlled interactions with tissue enhance understanding of biological processes in vivo. However, the fabrication of such thin film electronics with photolithographic processes remains a challenge for many biocompatible polymers. Recently, two shape memory polymer (SMP) systems, based on acrylate and thiol-ene/acrylate networks, were designed as substrates for softening neural interfaces with glass transitions above body temperature (37 °C) such that the materials are stiff for insertion into soft tissue and soften through low moisture absorption in physiological conditions. These two substrates, acrylate and thiol-ene/acrylate SMPs, are compared to polyethylene naphthalate, polycarbonate, polyimide, and polydimethylsiloxane, which have been widely used in flexible electronics research and industry. These six substrates are compared via dynamic mechanical analysis (DMA), thermogravimetric analysis (TGA), and swelling studies. The integrity of gold and chromium/gold thin films on SMP substrates are evaluated with optical profilometry and electrical measurements as a function of processing temperature above, below and through the glass transition temperature. The effects of crosslink density, adhesion and cure stress are shown to play a critical role in the stability of these thin film materials, and a guide for the future design of responsive polymeric materials suitable for neural interfaces is proposed. Finally, neural interfaces fabricated on thiol-ene/acrylate substrates demonstrate long-term fidelity through both in vitro impedance spectroscopy and the recording of driven local field potentials for 8 weeks in the auditory cortex of laboratory rats.

Hybrid integrated label-free chemical and biological sensors

Label-free sensors based on electrical, mechanical and optical transduction methods have potential applications in numerous areas of society, ranging from healthcare to environmental monitoring. Initial research in the field focused on the development and optimization of various sensor platforms fabricated from a single material system, such as fiber-based optical sensors and silicon nanowire-based electrical sensors. However, more recent research efforts have explored designing sensors fabricated from multiple materials. For example, synthetic materials and/or biomaterials can also be added to the sensor to improve its response toward analytes of interest. By leveraging the properties of the different material systems, these hybrid sensing devices can have significantly improved performance over their single-material counterparts (better sensitivity, specificity, signal to noise, and/or detection limits). This review will briefly discuss some of the methods for creating these multi-material sensor platforms and the advances enabled by this design approach.

On/Off-switchable zipper-like bioelectronics on a graphene interface

An on/off-switchable graphene-based zipper-like interface is architectured for efficient bioelectrocatalysis. The graphene interface transduces a temperature input signal into structural changes of the membrane, resulting in the amplification of electrochemical signals and their transformation into the gated transport of molecules through the membrane.

Biorecognition by DNA oligonucleotides after exposure to photoresists and resist removers

Combining biological molecules with integrated circuit technology is of considerable interest for next generation sensors and biomedical devices. Current lithographic microfabrication methods, however, were developed for compatibility with silicon technology rather than bioorganic molecules, and consequently it cannot be assumed that biomolecules will remain attached and intact during on-chip processing. Here, we evaluate the effects of three common photoresists (Microposit S1800 series, PMGI SF6, and Megaposit SPR 3012) and two photoresist removers (acetone and 1165 remover) on the ability of surface-immobilized DNA oligonucleotides to selectively recognize their reverse-complementary sequence. Two common DNA immobilization methods were compared: adsorption of 5'-thiolated sequences directly to gold nanowires and covalent attachment of 5'-thiolated sequences to surface amines on silica coated nanowires. We found that acetone had deleterious effects on selective hybridization as compared to 1165 remover, presumably due to incomplete resist removal. Use of the PMGI photoresist, which involves a high temperature bake step, was detrimental to the later performance of nanowire-bound DNA in hybridization assays, especially for DNA attached via thiol adsorption. The other three photoresists did not substantially degrade DNA binding capacity or selectivity for complementary DNA sequences. To determine whether the lithographic steps caused more subtle damage, we also tested oligonucleotides containing a single base mismatch. Finally, a two-step photolithographic process was developed and used in combination with dielectrophoretic nanowire assembly to produce an array of doubly contacted, electrically isolated individual nanowire components on a chip. Postfabrication fluorescence imaging indicated that nanowire-bound DNA was present and able to selectively bind complementary strands.

Small electron-transfer proteins as mediators in enzymatic electrochemical biosensors

Electrochemical mediators transfer redox equivalents between the active sites of enzymes and electrodes and, in this way, initiate bioelectrocatalytic redox processes. This has been very useful in the development of the so-called second-generation biosensors, in which they transduce a catalyzed reaction into an electrical signal. Among other pre-requisites, redox mediators must be readily oxidized and/or reduced at the electrode surface and readily interact with the biorecognition component. Small chemical compounds (e.g. ferrocene derivatives, ruthenium, or osmium complexes and viologens) are frequently used for this purpose but, lately, small redox proteins (e.g. horse heart cytochrome c) have also been used as redox partners in biosensing applications. In general, docking between two complementary proteins introduces a second level of selectivity to the biosensor and enlarges the list of compounds analyzed. Moreover, electrochemical interferences are frequently minimized owing to the small overpotentials achieved. This paper provides an overview of enzyme biosensors that are mediated by electron-transfer proteins. The paper begins with a brief discussion of mediated electrochemistry in biosensing systems and proceeds with a detailed description of relevant work on the cooperative use of redox enzymes and biological electron donors and/or acceptors.