Enhanced sensitivity detection of protein immobilization by fluorescent interference on oxidized silicon

Strategy to discover full-length amyloid-beta peptide ligands using high-efficiency microarray technology

Although the formation of β-amyloid (Aβ) fibrils in neuronal tissues is a hallmark of Alzheimer disease (AD), small-sized Aβ oligomers rather than mature fibrils have been identified as the most neurotoxic species. Therefore, the design of new inhibitors, able to prevent the aggregation of Aβ, is believed to be a promising therapeutic approach to AD. Unfortunately, the short-lived intermediate structures that occur in a solution along the Aβ aggregation pathway escape conventional experimental investigations and there is urgent need of new tools aimed at the discovery of agents targeting monomeric Aβ and blocking the early steps of amyloid aggregation. Here, we show the combination of high-efficiency slides (HESs) with peptide microarrays as a promising tool for identifying small peptides that bind Aβ monomers. To this aim, HESs with two immobilized reference peptides, (i.e., KLVFF and Semax) with opposite behavior, were investigated for binding to fluorescently labeled Aβ peptide. Transmission electron microscopy was used to demonstrate Aβ fibrillar aggregates missing. The use of HESs was critical to ensure convenient output of the fluorescent microarrays. The resulting sensitivity, as well as the low sample consumption and the high potential for miniaturization, suggests that the proposed combination of peptide microarrays and highly efficient slides would be a very effective technology for molecule profiling in AD drug discovery.

DNA microarray-based solid-phase PCR on copoly (DMA-NAS-MAPS) silicon coated slides: An example of relevant clinical application

In a previous study we developed a highly sensitive DNA microarray for the detection of common KRAS oncogenic mutations, which has been proven to be highly specific in assigning the correct genotype without any enrichment strategy even in the presence of minority mutated alleles. However, in this approach, the need of a spotter for the deposition of the purified PCR products on the substrates and the purification step of the conventional PCR are serious drawbacks. To overcome these limitations we have introduced the solid-phase polymerase chain reaction (SP-PCR) to form the array of PCR products starting from the oligonucleotide primers. This work was possible thanks to the great thermal stability of the copoly (DMA-NAS-MAPS) coating which withstands PCR thermal cycling temperatures. As an example of the application of this platform we performed the analysis of six common mutations in the codon 12 of KRAS gene (G12A, G12C, G12D, G12R, G12S, and G12V). In conclusion solid-phase PCR, combined with dual-color hybridization, allows mutation analysis in a shorter time span and is more suitable for automation.

Application of photonic crystal enhanced fluorescence to detection of low serum concentrations of human IgE antibodies specific for a purified cat allergen (Fel D1)

We demonstrate the detection of low concentrations of allergen-specific Immunoglobulin E (IgE) in human sera using a Photonic Crystal Enhanced Fluorescence (PCEF) microarray platform. The Photonic Crystal (PC) surface, designed to provide optical resonances for the excitation wavelength and emission wavelength of Cy5, was used to amplify the fluorescence signal intensity measured from a multiplexed allergen microarray. Surface-based sandwich immunoassays were used to detect and quantify specific IgE antibodies against a highly purified cat allergen (Fel d1). A comparison of the lowest detectable concentration of IgE measured by the PC microarray system and a commercially available clinical analyzer demonstrated that the PCEF microarray system provides higher sensitivity. The PCEF system was able to detect low concentrations of specific IgE (~0.02 kU/L), which is 5-17-fold more sensitive than the commercially available FDA-approved analyzers. In preliminary experiments using multi-allergen arrays, we demonstrate selective simultaneous detection of IgE antibodies to multiple allergens.

Tissue distribution and excretion kinetics of orally administered silica nanoparticles in rats

Purpose

The effects of particle size on the tissue distribution and excretion kinetics of silica nanoparticles and their biological fates were investigated following a single oral administration to male and female rats.

Methods

Silica nanoparticles of two different sizes (20 nm and 100 nm) were orally administered to male and female rats, respectively. Tissue distribution kinetics, excretion profiles, and fates in tissues were analyzed using elemental analysis and transmission electron microscopy.

Results

The differently sized silica nanoparticles mainly distributed to kidneys and liver for 3 days post-administration and, to some extent, to lungs and spleen for 2 days post-administration, regardless of particle size or sex. Transmission electron microscopy and energy dispersive spectroscopy studies in tissues demonstrated almost intact particles in liver, but partially decomposed particles with an irregular morphology were found in kidneys, especially in rats that had been administered 20 nm nanoparticles. Size-dependent excretion kinetics were apparent and the smaller 20 nm particles were found to be more rapidly eliminated than the larger 100 nm particles. Elimination profiles showed 7%–8% of silica nanoparticles were excreted via urine, but most nanoparticles were excreted via feces, regardless of particle size or sex.

Conclusion

The kidneys, liver, lungs, and spleen were found to be the target organs of orally-administered silica nanoparticles in rats, and this organ distribution was not affected by particle size or animal sex. In vivo, silica nanoparticles were found to retain their particulate form, although more decomposition was observed in kidneys, especially for 20 nm particles. Urinary and fecal excretion pathways were determined to play roles in the elimination of silica nanoparticles, but 20 nm particles were secreted more rapidly, presumably because they are more easily decomposed. These findings will be of interest to those seeking to predict potential toxicological effects of silica nanoparticles on target organs.

Integrated imaging instrument for self-calibrated fluorescence protein microarrays

Protein microarrays, or multiplexed and high-throughput assays, monitor multiple protein binding events to facilitate the understanding of disease progression and cell physiology. Fluorescence imaging is a popular method to detect proteins captured by immobilized probes with high sensitivity and specificity. Reliability of fluorescence assays depends on achieving minimal inter- and intra-assay probe immobilization variation, an ongoing challenge for protein microarrays. Therefore, it is desirable to establish a label-free method to quantify the probe density prior to target incubation to calibrate the fluorescence readout. Previously, a silicon oxide on silicon chip design was introduced to enhance the fluorescence signal and enable interferometric imaging to self-calibrate the signal with the immobilized probe density. In this paper, an integrated interferometric reflectance imaging sensor and wide-field fluorescence instrument is introduced for sensitive and calibrated microarray measurements. This platform is able to analyze a 2.5 mm × 3.4 mm area, or 200 spots (100 μm diameter with 200 μm pitch), in a single field-of-view.

Fluorescent protein senses and reports mechanical damage in glass-fiber-reinforced polymer composites

Yellow fluorescent protein (YFP) is used as a mechanoresponsive layer at the fiber/resin interface in glass-fiber-reinforced composites. The protein loses its fluorescence when subjected to mechanical stress. Within the material, it reports interfacial shear debonding and barely visible impact damage by a transition from a fluorescent to a non-fluorescent state.

A new microarray substrate for ultra-sensitive genotyping of KRAS and BRAF gene variants in colorectal cancer

Molecular diagnostics of human cancers may increase accuracy in prognosis, facilitate the selection of the optimal therapeutic regimen, improve patient outcome, reduce costs of treatment and favour development of personalized approaches to patient care. Moreover sensitivity and specificity are fundamental characteristics of any diagnostic method. We developed a highly sensitive microarray for the detection of common KRAS and BRAF oncogenic mutations. In colorectal cancer, KRAS and BRAF mutations have been shown to identify a cluster of patients that does not respond to anti-EGFR therapies; the identification of these mutations is therefore clinically extremely important. To verify the technical characteristics of the microarray system for the correct identification of the KRAS mutational status at the two hotspot codons 12 and 13 and of the BRAF^V600E mutation in colorectal tumor, we selected 75 samples previously characterized by conventional and CO-amplification at Lower Denaturation temperature-PCR (COLD-PCR) followed by High Resolution Melting analysis and direct sequencing. Among these samples, 60 were collected during surgery and immediately steeped in RNAlater while the 15 remainders were formalin-fixed and paraffin-embedded (FFPE) tissues. The detection limit of the proposed method was different for the 7 KRAS mutations tested and for the V600E BRAF mutation. In particular, the microarray system has been able to detect a minimum of about 0.01% of mutated alleles in a background of wild-type DNA. A blind validation displayed complete concordance of results. The excellent agreement of the results showed that the new microarray substrate is highly specific in assigning the correct genotype without any enrichment strategy.

Interferometric silicon biochips for label and label-free DNA and protein microarrays

Protein and DNA microarrays hold the promise to revolutionize the field of molecular diagnostics. Traditional microarray applications employ labeled detection strategies based on the use of fluorescent and chemiluminescent secondary antibodies. However, the development of high throughput, sensitive, label-free detection techniques is attracting attention as they do not require labeled reactants and provide quantitative information on binding kinetics. In this article, we will provide an overview of the recent author's work in label and label-free sensing platforms employing silicon/silicon oxide (Si/SiO(2)) substrates for interferometric and/or fluorescence detection of microarrays. The review will focus on applications of Si/SiO(2) with controlled oxide layers to (i) enhance the fluorescence intensity by optical interferences, (ii) quantify with sub-nanometer accuracy the axial locations of fluorophore-labeled probes tethered to the surface, and (iii) detect protein-protein interactions label free. Different methods of biofunctionalization of the sensing surface will be discussed. In particular, organosilanization reactions for monodimensional coatings and polymeric coatings will be extensively reviewed. Finally, the importance of calibration of protein microarrays through the dual use of labeled and label-free detection schemes on the same chip will be illustrated.

Allergen microarrays on high-sensitivity silicon slides

We have recently introduced a silicon substrate for high-sensitivity microarrays, coated with a functional polymer named copoly(DMA-NAS-MAPS). The silicon dioxide thickness has been optimized to produce a fluorescence intensification due to the optical constructive interference between the incident and reflected lights of the fluorescent radiation. The polymeric coating efficiently suppresses aspecific interaction, making the low background a distinctive feature of these slides. Here, we used the new silicon microarray substrate for allergy diagnosis, in the detection of specific IgE in serum samples of subjects with sensitizations to inhalant allergens. We compared the performance of silicon versus glass substrates. Reproducibility data were measured. Moreover, receiver-operating characteristic (ROC) curves were plotted to discriminate between the allergy and no allergy status in 30 well-characterized serum samples. We found that reproducibility of the microarray on glass supports was not different from available data on allergen arrays, whereas the reproducibility on the silicon substrate was consistently better than on glass. Moreover, silicon significantly enhanced the performance of the allergen microarray as compared to glass in accurately identifying allergic patients spanning a wide range of specific IgE titers to the considered allergens.

Peptide microarrays on coated silicon slides for highly sensitive antibody detection

Peptides, with their well-established chemistry and fully automated synthesis, provide an invaluable tool for the screening of protein ligands, for epitope mapping, and for antibody diagnostics on the microarray format.The method described in this chapter shows that the sensitivity of a peptide-based microimmunoassay is greatly improved by using a new, specifically developed substrate made of silicon coated by an optimized layer of silicon oxide. A set of six peptides corresponding to the sequences of human and rat acetylcholine receptor subunits was immobilized on glass and silicon slides coated by a copolymer of N,N-dimethylacrylamide, N-acryloyloxysuccinimide, and 3-(trimethoxysilyl) propyl methacrylate, copoly(DMA-NAS-MAPS). The spotted probes were incubated with rabbit anti-sera and with purified antibodies raised against the corresponding peptides. The coated silicon slides, in comparison against the glass substrates, showed a five- to tenfold enhancement of the fluorescence signals, leading to the specific detection of the full set of antibodies down to a concentration of 0.5-1 ng/mL in serum. The sensitivity provided by the test allows its use for the diagnosis of antibodies in clinical samples.

High sensitivity protein assays on microarray silicon slides

In this work, we report on the improvement of microarray sensitivity provided by a crystalline silicon substrate coated with thermal silicon oxide functionalized by a polymeric coating. The improvement is intended for experimental procedures and instrumentations typically involved in microarray technology, such as fluorescence labeling and a confocal laser scanning apparatus. The optimized layer of thermally grown silicon oxide (SiO(2)) of a highly reproducible thickness, low roughness, and fluorescence background provides fluorescence intensification due to the constructive interference between the incident and reflected waves of the fluorescence radiation. The oxide surface is coated by a copolymer of N,N-dimethylacrylamide, N-acryloyloxysuccinimide, and 3-(trimethoxysilyl)propyl methacrylate, copoly(DMA-NAS-MAPS), which forms, by a simple and robust procedure, a functional nanometric film. The polymeric coating with a thickness that does not appreciably alter the optical properties of the silicon oxide confers to the slides optimal binding specificity leading to a high signal-to-noise ratio. The present work aims to demonstrate the great potential that exists by combining an optimized reflective substrate with a high performance surface chemistry. Moreover, the techniques chosen for both the substrate and surface chemistry are simple, inexpensive, and amenable to mass production. The present application highlights their potential use for diagnostic applications of real clinical relevance. The coated silicon slides, tested in protein and peptide microarrays for detection of specific antibodies, lead to a 5-10-fold enhancement of the fluorescence signals in comparison to glass slides.

Label-free biosensing of a gene mutation using a silicon nanowire field-effect transistor

We have developed a silicon nanowire field-effect transistor (NWFET) that allows deoxyribonucleic acid (DNA) biosensing. The nanowire (NW) was fabricated on a silicon-on-insulator wafer to provide effective ohmic contact. The NWFET sensor displayed n-channel depletion characteristics. To demonstrate the sensing capacity of the NWFET, we employed the BRAF(V599E) mutation gene, which correlates to the occurrence of cancers, as the target DNA sequence. The threshold voltage of the NWFET increased when the mutation gene was hybridized with the capture DNA strands on the nanowire, and decreased to the original level after de-hybridization of the gene. The shift in the drain current-gate voltage (I(D)-V(G)) curves revealed that the electrical signal had a logarithmic relationship with respect to the concentration of the mutation gene of up to six orders of magnitude, with the detection limit in the sub-femtomolar level. The detection results of mismatched DNA sequences, including one- and five-base-mismatched DNA strands, could be distinguished from complementary DNA gene by this sensor. The excellent electrical results obtained using this label-free NWFET sensor suggest that such devices might be potentially useful tools for biological research and oncogene screening.

Development of new substrates for high-sensitive genotyping of minority mutated alleles

An unsurpassed level of sensitivity was reached in the detection of minority mutated alleles. A low-density microarray was printed on a substrate specifically designed to provide an interference effect which amplifies the collection of the light emitted on the support and reinforces the intensity of excitation light. Optimal performance of the array was obtained by maximizing the probe density and the binding efficiency to the target through a polymeric coating made by the adsorption of a copolymer of N,N-dimethylacrylamide (97% of moles), N,N-acryloyloxysuccinimide (2%) and 3-(trimethoxysilyl)propyl methacrylate (1%) synthesized by free radical copolymerization. The new substrate was used in the identification of fetal mutations in the maternal plasma DNA. Amino-modified amplicons from genomic DNA corresponding to the locus of eight beta-thalassemia mutations were immobilized and interrogated with dual-color oligonucleotide targets. Compared with the conventional glass substrates, the new substrate showed a great enhancement of fluorescence signals thanks to the combination of the optics with the highly efficient polymeric coating, allowing specific detection of all mutations. The high sensitivity and selectivity obtained made it possible to develop assays for the identification of paternally inherited mutations on fetal DNA in the maternal plasma in couples at risk for beta-thalassemia.

Assembling and imaging of his-tag green fluorescent protein on mica surfaces studied by atomic force microscopy and fluorescence microscopy

The adsorption of his-tag green fluorescent protein (GFPH(6)) onto the mica surfaces has been studied by atomic force microscopy (AFM) and laser confocal fluorescence microscopy. By controlling the adsorption conditions, separated single GFPH(6) and GFPH(6) monolayer can be adsorbed and formed on mica surfaces. In present experiments, based on the AFM measurement, we found that the adsorbed GFPH(6) was bound on the mica surface with its beta-sheets. The formed GFPH(6) monolayer on mica surfaces was flat, uniform, and stable. Some applications of the formed monolayer have been demonstrated. The formed monolayer can be used as a substrate for DNA imaging and AFM mechanical lithography.

Optimization of fluorescence enhancement for silicon-based microarrays

An optical technique for the enhancement of fluorescence detection sensitivity on planar samples is presented. Such a technique is based on the simultaneous optimization of excitation and light collection by properly combining interference and reflectance from the sample holder. Comparative tests have been performed in microarray applications, by evaluating the proposed solution against commercial glass-based devices, using popular labeling dyes, such as Cy3 and Cy5. The proposed technique is implemented on a substrate built with standard silicon technology and is therefore well suited for integrated micro total analysis systems (microTAS) applications.

Label-free detection of DNA with interdigitated micro-electrodes in a fluidic cell

We investigate the analytical performance of an interdigitated electrode sensor for the label-free detection of DNA, by monitoring the complex impedance of 5 microm wide interdigitated Pt microelectrodes on a glass substrate. We detect the hybridization of unlabeled 38-mer target ssDNA with a complementary probe that is bound on the glass in between the electrodes by a disuccinimidyl terephtalate and aminosilane immobilization procedure. The sensor is mounted in a microfluidic flow cell, in which hybridization is monitored and in situ compared with a reference. After hybridization, the cell is perfused with deionised water and the dependence of the measured conductance due to the immobilized target DNA layer, to target DNA concentrations down to 1 nM is demonstrated. Subsequently, we apply our sensor to the detection of pathogen DNA from Salmonella choleraesuis in dairy food.

Monitoring biosensor capture efficiencies: development of a model using GFP-expressing Escherichia coli O157:H7

One of the known limitations for biosensor assays is the high limit of detection for target cells within complex samples (e.g., Escherichia coli at 10(4) to 10(5) CFU/mL) due to poor capture efficiencies. Currently, researchers can only estimate the cell capture efficiency necessary to produce a positive signal for any type of biosensor using either cumbersome techniques or regression modeling. To solve this problem, green fluorescent protein (GFP) transformed E. coli O157:H7 was used to develop a novel method for directly and easily measuring the cell capture efficiency of any given biosensor platform. For demonstration purposes, E. coli-GFP was assayed on both fiber optic and planar waveguide biosensor platforms. Cells were enumerated using an epifluorescent microscope and digital camera to determine the number of cells captured on the surfaces. Conversion algorithms were used with these digital images to determine the cell density of entire waveguide surface areas. For E. coli-GFP, the range of cell capture efficiency was between 0.4 and 1.2%. This indicates that although the developed model works for calculating cell capture, there is still need for significant improvements in capture methods themselves, to increase the capture efficiency and thereby lower detection limits. The use of GFP-transformed target cells and cell capture efficiency calculations can facilitate the development and optimization processes by allowing direct enumeration of new biosensor design configurations and sample processing strategies.

Chemical modifications of inert organic monolayers with oxygen plasma for biosensor applications

In this paper we present a study of using oxygen plasma for chemically modifying inert hydrocarbon self-assembled monolayers of octadecyltrichlorosilane (OTS-SAMs) and rendering active surfaces for protein immobilization. Detailed surface modification and protein immobilization were characterized by using ellipsometry, X-ray photoelectron spectroscopy (XPS), Fourier transform infrared-attenuated total reflectance spectroscopy, and fluorescence microscopy. Our XPS results showed that the surface reaction between OTS-SAMs and oxygen plasma can generate new surface functional groups such as alcohol (C-O), aldehyde (C=O), and carboxylic acid (O-C=O), and their compositions can be controlled by using different treatment times and powers. A short treatment time ( approximately 1 s) and high power (10 W) can lead to a higher density of aldehyde groups, which can serve as linker groups for protein immobilization through the formation of Schiff bases with the amine groups of proteins. By using the fluorescence immunostaining method, we confirmed that human immunoglobulin (IgG) can be immobilized on a glass slide, only if the surface was decorated with OTS-SAMs and if the OTS-SAMs were pretreated with oxygen plasma. The protein immobilized on the oxygen-plasma-treated surface can only be recognized by using a highly specific antibody, FITC-anti-IgG, but not FITC-anti-biotin.

DNA microarrays on silicon nanostructures: Optimization of the multilayer stack for fluorescence detection

To improve the sensitivity of fluorescence detection in DNA microarrays, the use of silicon nanostructures based on chemical vapor deposition (CVD) processes adopted for the growth of rough polycrystalline silicon was investigated. These substrates present advantages of two main properties which could lead to an enhancement of the fluorescence detection, i.e. (i) the increase of the available surface area in order to achieve a high loading capacity of biomolecules and (ii) the optimization of the stack of silicon nanostructures support. Indeed, the structures were elaborated on an initial thermal oxide layer and then covered with a silicon oxide layer, obtained by oxidation and allowing the functionalization for the subsequent grafting of DNA probes. Moreover, these oxide layers play a part in the fluorescence detection. The influence of the silicon oxide layer thickness above and below the silicon grains in close relation with the density of nanostructures on the emitted fluorescence was emphasized. This paper presents an experimental characterization of the fluorescence intensity and the optimization of the different layers that composed the substrate used for DNA microarrays. The performances of the microarrays were investigated by means of hybridization experiments using complementary fluorescent labeled-oligonucleotides targets. Our results indicate that an optimized substrate can be designed and that the use of oxidized silicon nanostructures for support of biochip could be a strategy for improving the sensitivity of fluorescence detection.

Preserved enzymatic activity of glucose oxidase immobilized on unmodified electrodes for glucose detection

Glucose sensing electrodes have been realized by immobilizing glucose oxidase (GOx) on unmodified edge plane of highly oriented pyrolytic graphite (epHOPG) and the native oxide of heavily doped silicon (SiO2/Si). Both kinds of electrode show direct interfacial electron transfer due to the redox process of the immobilized GOx. The measured formal potential of the redox process agrees with that of the native enzyme, suggesting that the immobilized GOx has retained its enzymatic activity. The electron transfer rates of the GOx immobilized electrode are 2s(-1) for GOx/epHOPG electrode and 7.9s(-1) for GOx/SiO2/Si electrode, which are greater than those for which GOx is immobilized on modified electrodes, probably due to the fact that the enzyme makes direct contact to electrode surface. The preservation of the enzymatic activity of the immobilized GOx has been confirmed by observing the response of the GOx/epHOPG and GOx/SiO2/Si electrodes to glucose with a detection limit of 0.050 mM. The response signals the catalyzed oxidation of glucose and, therefore, confirms that the immobilized GOx retained its enzymatic activity. The properties of the electrode as a glucose sensor are presented.

Detecting the chemoselective ligation of peptides to silicon with the use of cobalt-carbonyl labels

While fluorescent-based methods are generally used to detect the immobilization and the interactions of biomolecules to solid supports, recent studies have shown their limitations in the case of silicon surfaces. As an alternative, we investigated the synthesis of peptides labeled with a metal transition complex and their subsequent immobilization to the silicon surfaces. The feasibility of using such probes has been explored by Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS). By starting with hydrogen-terminated or oxidized silicon surfaces, we functionalized those surfaces with semicarbazide groups and showed the site-specific linkage of glyoxylyl peptides labeled with a Co2(CO)6 moiety.

Selective patterning and immobilization of biomolecules within precisely-defined micro-reservoirs

Herein, we present the fabrication of well-defined micro-reservoirs and a simple strategy to immobilize biomolecules selectively inside the reservoirs. The micro-reservoirs are fabricated using a photocurable prepolymer, which enables the formation of concrete structures with high-fidelity, so that the reservoirs are spatially-segregated from each other by rigid physical barriers. For the directed binding of the protein, two steps are involved. First, poly(ethylene glycol) (PEG) is contact-printed on those areas where the protein binding is not desired, and next, protein binding is promoted where desired via carbodiimide chemistry. Fluorescein-tagged albumin is successfully immobilized inside the micro-reservoirs and microchannel arrays with high sensitivity, regardless of the sizes of the reservoirs and channels. The proposed system can be used for constructing multi-functional biosensors by immobilizing individual bioorganisms specifically in each micro-reservoir or microchannel.

Immobilisation of oligo-peptidic probes for microarray implementation: Characterisation by FTIR, Atomic Force Microscopy and 2D fluorescence

Proteomic microarrays show a wide range of applications for the investigation of DNA-protein, enzyme-substrate as well as protein-protein interactions. Among many challenges to build a viable "protein microarray", the surface chemistry that will allow to immobilised various proteins to retain their biological activity is of paramount importance. Here we report a chemical functionalisation method allowing immobilisation of oligo-peptides onto silica surface (porous silica, glass, thermal silicon dioxide). Substrates were first derivatised with a monofunctional silane allowing the elaboration of dense and uniform monolayers in highly reproducible way. Prior to the oligo-peptides grafting, this organic layer was functionalised with an amino-polyethyleneglycol. The coupling step of oligo-peptides onto functionalised supports is achieved through activation of the C-terminal function of the oligo-peptides. Chemical surface modifications were followed by FTIR spectroscopy, AFM measurements and fluorescence scanning microscopy. A systematic study of the oligo-peptide grafting conditions (time, concentration, solvent) was carried out to optimise this step. The oligo-peptides grafting strategy implemented in this work ensure a covalent and oriented grafting of the oligo-peptides. This orientation is ensured through the use of fully protected peptide except the terminal primary amine. The immobilized peptides will be then deprotected before biological recognition. This strategy is crucial to retain the biological activity of thousands of oligo-probes assessed on a microarray.

Optimisation of a silicon/silicon dioxide substrate for a fluorescence DNA microarray

This paper presents a comprehensive theory and experimental characterisation of the modulation of the fluorescence intensity by the construction of optical interferences on oxidised silicon substrates used for DNA microarrays. The model predicts a 90-fold variation of the fluorescence signal depending on the oxide thickness. For a Cy3 dye, the signal is maximal for a 90 nm oxide thickness corresponding to a 7.5-fold enhancement with respect to a standard glass substrate. For experimental validation of the model, we have prepared Si/SiO2 substrates with different parallel steps of decreasing oxide thicknesses on the same sample using a buffered oxide etch (BOE) etching process after thermal oxidation. The SiO2 surface has been functionalized by a silane monolayer before in situ synthesis of L185 oligonucleotide probes. After hybridisation with complementary targets, the variations of the fluorescence intensity versus oxide thickness are in very good accordance with the theoretical model. The experimental comparison against a glass substrate shows a 10-fold enhancement of the detection sensitivity. Our results demonstrate that a Si/SiO2 substrate is an attractive alternative to standard glass slides for the realisation of fluorescence DNA microarrays whenever detection sensitivity is an important issue.

Interaction analysis of chimeric metal-binding green fluorescent protein and artificial solid-supported lipid membrane by quartz crystal microbalance and atomic force microscopy

Non-specific adsorption and specific interaction between a chimeric green fluorescent protein (GFP) carrying metal-binding region and the immobilized zinc ions on artificial solid-supported lipid membranes was investigated using the quartz crystal microbalance technique and the atomic force microscopy (AFM). Supported lipid bilayer, composed of octanethiol and 1,2-dipalmitoyl-sn-glycero-3-phosphocholine/1,2-dioleoyl-sn-glycero-3-[N-(5-amino-1-carboxypentyl iminodiacetic acid)succinyl] (NTA-DOGS)-Zn2+, was formed on the gold electrode of quartz resonator (5 MHz). Binding of the chimeric GFP to zinc ions resulted in a rapid decrease of resonance frequency. Reversibility of the process was demonstrated via the removal of metal ions by EDTA. Nanoscale structural orientation of the chimeric GFP on the membrane was imaged by AFM. Association constant of the specific binding to metal ions was 2- to 3-fold higher than that of the non-specific adsorption, which was caused by the fluidization effect of the metal-chelating lipid molecules as well as the steric hindrance effect. This infers a possibility for a further development of biofunctionalized membrane. However, maximization is needed in order to attain closer advancement to a membrane-based sensor device.