Kinetic adsorption of application of carbon nanotubes for Pb(II) removal from aqueous solution

Carbon nanomaterials for co-removal of antibiotics and heavy metals from water systems: An overview

Pollution resulting from the combination of antibiotics and heavy metals (HMs) poses a significant threat to human health and the natural environment. Adsorption is a promising technique for removing antibiotics and HMs owing to its low cost, simple procedures, and high adsorption capacity. In recent years, various novel carbon nanomaterials have been developed, demonstrating outstanding performance in simultaneously removing antibiotics and HMs. This work presents a comprehensive review of carbon nanomaterials (i.e., carbon nanotubes, graphene, resins, and other nanocomposites) for the co-removal of antibiotics and HMs in water systems. The mechanisms influencing the simultaneous removal of antibiotics and HMs include the bridging effect, electrostatic shielding, competition, and spatial site-blocking effects. These mechanisms can promote, inhibit, or have no impact on the adsorption capacity for antibiotics or HMs. Additionally, environmental factors such as pH, inorganic ions, natural organic matter, and microplastics affect the adsorption efficiency. This review also covers adsorbent regeneration and cost estimation. On the laboratory scale, the cost of the adsorption process primarily depends on the chemical and energy costs of adsorbent production. Our assessment highlights that the carbon-nanomaterial-mediated simultaneous removal of antibiotics and HMs warrants comprehensive consideration from both economic and environmental perspectives.

Oxygen atmosphere enhances ball milling remediation of petroleum-contaminated soil and reuse as adsorptive/catalytic materials for wastewater treatment

Ball milling is an environmentally friendly technology for the remediation of petroleum-contaminated soil (PCS), but the cleanup of organic pollutants requires a long time, and the post-remediation soil needs an economically viable disposal/reuse strategy due to its vast volume. The present paper develops a ball milling process under oxygen atmosphere to enhance PCS remediation and reuse the obtained carbonized soil (BCS-O) as wastewater treatment materials. The total petroleum hydrocarbon removal rates by ball milling under vacuum, air, and oxygen atmospheres are 39.83%, 55.21%, and 93.84%, respectively. The Langmuir and pseudo second-order models satisfactorily describe the adsorption capacity and behavior of BCS-O for transition metals. The Cu2+, Ni2+, and Mn2+ adsorbed onto BCS-O were mainly bound to metal carbonates and metal oxides. Furthermore, BCS-O can effectively activate persulfate (PDS) oxidation to degrade aniline, while BCS-O loaded with transition metal (BCS-O-Me) shows better activation efficiency and reusability. BCS-O and BCS-O-Me activated PDS oxidation systems are dominated by 1O2 oxidation and electron transfer. The main active sites are oxygen-containing functional groups, vacancy defects, and graphitized carbon. The oxygen-containing functional groups and vacancy defects primarily activate PDS to generate 1O2 and attack aniline. Graphitized carbon promotes aniline degradation by accelerating electron transfer. The paper develops an innovative strategy to simultaneously realize efficient remediation of PCS and sequential reuse of the post-remediation soil.

Recent Progress on the Adsorption of Heavy Metal Ions Pb(II) and Cu(II) from Wastewater

With the processes of industrialization and urbanization, heavy metal ion pollution has become a thorny problem in water systems. Among the various technologies developed for the removal of heavy metal ions, the adsorption method is widely studied by researchers and various nanomaterials with good adsorption performances have been prepared during the past decades. In this paper, a variety of novel nanomaterials with excellent adsorption performances for Pb(II) and Cu(II) reported in recent years are reviewed, such as carbon-based materials, clay mineral materials, zero-valent iron and their derivatives, MOFs, nanocomposites, etc. The novel nanomaterials with extremely high adsorption capacity, selectivity and particular nanostructures are summarized and introduced, along with their advantages and disadvantages. And, some future research priorities for the treatment of wastewater are also prospected.

Removal of lead ions from aqueous solution by modified nanocellulose

Heavy metals significantly impact the environment due to their non-biodegradable, toxic, and carcinogenic behaviors. Lead contaminants impose severe health impacts on humans and the water environment. Therefore, eco-friendly and efficient lead ion removal practices such as nanotechnology are an urgent requirement for the abatement of lead pollution. In the present study, nanocellulose was synthesized from the cotton straw residue using chemical methods and modified with titanium dioxide to form a nanocomposite. The nanocomposite synthesized was characterized by using FTIR, XRD, FESEM, and BET. FTIR results noticed peaks at 1648.43 and 1443.57 cm-1 for cellulose and Ti-O-Ti bonding at 505.02 cm-1. The nanocomposite was noticed to be disordered and irregular in shape. The nanocomposite has particle sizes of 83 nm. The nanocomposite crystalline particle had 65% anatase and 32% rutile phases observed from the XRD result. BET results show that the surface area of nanocellulose increases after surface modification from 25.692 to 42.510 m2/g. The adsorption capacity of the nanocomposite was 0.552 mg/g was noticed. The Elovich kinetic and Baudu isotherms are the best-fitted models for lead ion adsorption. Thermodynamic parameters resulted in Gibbs free energy decreasing with temperature. This study revealed that modified cellulosic adsorbents efficiently absorbed lead ions derived from cotton straws.

Nanoremediation strategies to address environmental problems

A rapid rise in population, extensive anthropogenic activities including agricultural practices, up-scaled industrialization, massive deforestation, etc. are the leading causes of environmental degradation. Such uncontrolled and unabated practices have affected the quality of environment (water, soil, and air) synergistically by accumulating huge quantities of organic and inorganic pollutants in it. Environmental contamination is posing a threat to the existing life on the Earth, therefore, demands the development of sustainable environmental remediation approaches. The conventional physiochemical remediation approaches are laborious, expensive, and time-consuming. In this regard, nanoremediation has emerged as an innovative, rapid, economical, sustainable, and reliable approach to remediate various environmental pollutants and minimize or attenuate the risks associated with them. Owing to their unique properties such as high surface area to volume ratio, enhanced reactivity, tunable physical parameters, versatility, etc. nanoscale objects have gained attention in environmental clean-up practices. The current review highlights the role of nanoscale objects in the remediation of environmental contaminants to minimize their impact on human, plant, and animal health; and air, water, and soil quality. The aim of the review is to provide information about the applications of nanoscale objects in dye degradation, wastewater management, heavy metal and crude oil remediation, and mitigation of gaseous pollutants including greenhouse gases.

Preparation and characterization of chemically cross-linked zwitterionic copolymer hydrogel for direct dye and toxic trace metal removal from aqueous medium

In this work, a zwitterionic copolymer hydrogel with adsorption affinity toward anionic dye and cationic trace metal was prepared by a free radical copolymerization of cationic ([3-(methacryloylamino)propyl] trimethylammonium chloride (MPTC)) and anionic (sodium 4-vinylbenzenesulfonate (SVBS)) monomers. Bis[2-(methacryloyloxy)ethyl] phosphate was used as a cross-linker and its effect on the adsorption properties of the prepared hydrogel was evaluated. The prepared materials were characterized by FTIR, XRD, SEM, EDX, and N₂ adsorption at 77 K analysis. FTIR and EDX analysis demonstrated the successful preparation of poly(MPTC-co-VBS). XRD and SEM analysis showed that the poly (MPTC-co-VBS) is amorphous and has quasi-honeycomb morphology with large pores. Increasing the amount of the cross-linker enhanced the adsorption of direct blue 71 dye (DB71) and Pb(II) ions. The highest removal of DB71 and Pb(II) was achieved after 2 h using 1.5 g/L of poly(MPTC-co-VBS); however, the optimum solution pH was 3 for DB71 and 5 for Pb(II). The kinetics and isotherm studies illustrated that the surface of poly(MPTC-co-VBS) is heterogenous with small-sized homogenous pitches and the DB71 and Pb(II) adsorption onto poly(MPTC-co-VBS) is favorable. Finally, poly(MPTC-co-VBS) is more efficient in removing DB71 and Pb(II) from aqueous solutions than many other reported adsorbents.

Elevated Adsorption of Lead and Arsenic over Silver Nanoparticles Deposited on Poly(amidoamine) Grafted Carbon Nanotubes

An efficient adsorbent, CNTs-PAMAM-Ag, was prepared by grafting fourth-generation aromatic poly(amidoamine) (PAMAM) to carbon nanotubes (CNTs) and successive deposition of Ag nanoparticles. The FT-IR, XRD, TEM and XPS results confirmed the successful grafting of PAMAM onto CNTs and deposition of Ag nanoparticles. The absorption efficiency of CNTs-PAMAM-Ag was evaluated by estimating the adsorption of two toxic contaminants in water, viz., Pb(II) and As(III). Using CNTs-PAMAM-Ag, about 99 and 76% of Pb(II) and As(III) adsorption, respectively, were attained within 15 min. The controlling mechanisms for Pb(II) and As(III) adsorption dynamics were revealed by applying pseudo-first and second-order kinetic models. The pseudo-second-order kinetic model followed the adsorption of Pb(II) and As(III). Therefore, the incidence of chemisorption through sharing or exchanging electrons between Pb(II) or As(III) ions and CNTs-PAMAM-Ag could be the rate-controlling step in the adsorption process. Further, the Weber-Morris intraparticle pore diffusion model was employed to find the reaction pathways and the rate-controlling step in the adsorption. It revealed that intraparticle diffusion was not a rate-controlling step in the adsorption of Pb(II) and As(III); instead, it was controlled by both intraparticle diffusion and the boundary layer effect. The adsorption equilibrium was evaluated using the Langmuir, Freundlich, and Temkin isotherm models. The kinetic data of Pb(II) and As(III) adsorption was adequately fitted to the Langmuir isotherm model compared to the Freundlich and Temkin models.

Bio-Inspired Synthesis of Carbon-Based Nanomaterials and Their Potential Environmental Applications: A State-of-the-Art Review

Providing safe drinking water and clean water is becoming a more challenging task all around the world. Although some critical issues and limits remain unsolved, implementing ecologically sustainable nanomaterials (NMs) with unique features, e.g., highly efficient and selective, earth-abundance, renewability, low-cost manufacturing procedures, and stability, has become a priority. Carbon nanoparticles (NPs) offer tremendous promise in the sectors of energy and the environment. However, a series of far more ecologically friendly synthesis techniques based on natural, renewable, and less expensive waste resources must be explored. This will reduce greenhouse gas emissions and harmful material extraction and assist the development of green technologies. The progress achieved in the previous 10 years in the fabrication of novel carbon-based NMs utilizing waste materials as well as natural precursors is reviewed in this article. Research on carbon-based NPs and their production using naturally occurring precursors and waste materials focuses on this review research. Water treatment and purification using carbon NMs, notably for industrial and pharmaceutical wastes, has shown significant potential. Research in this area focuses on enhanced carbonaceous NMs, methods, and novel nano-sorbents for wastewater, drinking water, groundwater treatment, as well as ionic metal removal from aqueous environments. Discussed are the latest developments and challenges in environmentally friendly carbon and graphene quantum dot NMs.

GO-SWCNT Buckypapers as an Enhanced Technology for Water Decontamination from Lead

Water decontamination is an important challenge resulting from the incorrect disposal of heavy metal waste into the environment. Among the different available techniques (e.g., filtration, coagulation, precipitation, and ion-exchange), adsorption is considered the cheapest and most effective procedure for the removal of water pollutants. In the last years, several materials have been tested for the removal of heavy metals from water, including metal-organic frameworks (MOFs), single-walled carbon nanotubes (SWCNTs), and graphene oxide (GO). Nevertheless, their powder consistency, which makes the recovery and reuse after adsorption difficult, is the main drawback for these materials. More recently, SWCNT buckypapers (SWCNT BPs) have been proposed as self-standing porous membranes for filtration and adsorption processes. In this paper, the adsorption capacity and selectivity of Pb²⁺ (both from neat solutions and in the presence of other interferents) by SWCNT BPs were evaluated as a function of the increasing amount of GO used in their preparation (GO-SWCNT buckypapers). The highest adsorption capacity, 479 ± 25 mg g⁻¹, achieved for GO-SWCNT buckypapers with 75 wt.% of graphene oxide confirmed the effective application of such materials for cheap and fast water decontamination from lead.

Adsorption properties and influencing factors of Cu(II) on polystyrene and polyethylene terephthalate microplastics in seawater

As an emerging contamination in the ocean, microplastics can act as effective vectors of pollutants, the ecological risks caused by the combined pollution of microplastics and other pollutants have attracted growing attention. In this work, Copper (Cu(II)) was chosen as the classic pollutant, polystyrene (PS) and polyethylene terephthalate (PET) pellets were used as the typical marine microplastics, the adsorption performance of Cu(II) on PS and PET beads was investigated by adsorption kinetics and isotherm experiments, and other influencing conditions, such as pH, salinity, coexisting heavy metals ions and aging treatment, were evaluated. The results indicated that the adsorption behavior of Cu(II) on PS and PET was spontaneous and endothermic in the simulated seawater environment, and the batch experimental data can be effectively described by pseudo-second-order model and Freundlich isothermal model. Besides, the adsorption capacity of microplastics for Cu(II) was the best at pH 7, the change of salinity had no obvious effect on the adsorption in the natural marine environment. Moreover, co-existence of lead (Pb(II)) exhibited evident impacts on Cu(II) sorption onto PS and PET, which confirmed the adsorption competition effect between them. Additionally, high temperature aging treatment of microplastics in different environments for different duration time could obviously affect the properties of microplastics. It was found that the microplastics after being exposed to high temperature environment in the air for 168 h showed relatively stronger adsorption amount for Cu(II). In summary, these findings suggested that electrostatic interaction and distributed diffusion mechanisms may be the main mechanisms of adsorption, while no new functional groups were generated after the adsorption, indicating that physisorption may dominate the adsorption performance of PS and PET pellets for Cu(II). This study provides supplementary insights into the role of microplastics as carriers of heavy metals in the marine environment.

A review on sources of heavy metals, their toxicity and removal technique using physico-chemical processes from wastewater

The world is facing environmental pollution and is in an alarming situation due to industrialization and urbanization. Especially, industrial wastewater discharge is causing serious pollution in the environment (water, soil, and air) and has become a challenge for researchers and scientists. Wastewater contains heavy metals like Cu, Ni, Cr, Pb, and Ar and causes toxicity in living beings and the environment. In this review, the sources of heavy metals and their toxicological effects on the environment have been reviewed. Various remediation techniques such as reverse osmosis, chemical precipitation, and ultrafiltration are being used for the treatment of wastewater, but still are limited in their efficiencies, residues, cost, and versatility. In this study, the most promising wastewater treatment technique, the physic-chemical technique, has been reviewed along with its working mechanism and efficiency. Further, the pros and cons of this technique and sub-techniques have also been reviewed to provide a basic understanding to beginners and a pathway to experts in the selection of better techniques.

Heavy metal removal by biomass-derived carbon nanotubes as a greener environmental remediation: A comprehensive review

The concentrations of heavy metal ions found in waterways near industrial zones are often exceed the prescribed limits, posing a continued danger to the environment and public health. Therefore, greater attention has been devoted into finding the efficient solutions for adsorbing heavy metal ions. This review paper focuses on the synthesis of carbon nanotubes (CNTs) from biomass and their application in the removal of heavy metals from aqueous solutions. Techniques to produce CNTs, benefits of modification with various functional groups to enhance sorption uptake, effects of operating parameters, and adsorption mechanisms are reviewed. Adsorption occurs via physical adsorption, electrostatic interaction, surface complexation, and interaction between functional groups and heavy metal ions. Moreover, factors such as pH level, CNTs dosage, duration, temperature, ionic strength, and surface property of adsorbents have been identified as the common factors influencing the adsorption of heavy metals. The oxygenated functional groups initially present on the surface of the modified CNTs are responsible towards the adsorption enhancement of commonly-encountered heavy metals such as Pb²⁺, Cu²⁺, Cd²⁺, Co²⁺, Zn²⁺, Ni²⁺, Hg²⁺, and Cr⁶⁺. Despite the recent advances in the application of CNTs in environmental clean-up and pollution treatment have been demonstrated, major obstacles of CNTs such as high synthesis cost, the agglomeration in the post-treated solutions and the secondary pollution from chemicals in the surface modification, should be critically addressed in the future studies for successful large-scale applications of CNTs.

Review on the Use of Heavy Metal Deposits from Water Treatment Waste towards Catalytic Chemical Syntheses

The toxicity and persistence of heavy metals has become a serious problem for humans. These heavy metals accumulate mainly in wastewater from various industries' discharged effluents. The recent trends in research are now focused not only on the removal efficiency of toxic metal particles, but also on their effective reuse as catalysts. This review discusses the types of heavy metals obtained from wastewater and their recovery through commonly practiced physico-chemical pathways. In addition, it covers the advantages of the new system for capturing heavy metals from wastewater, as compared to older conventional technologies. The discussion also includes the various structural aspects of trapping systems and their hypothesized mechanistic approaches to immobilization and further rejuvenation of catalysts. Finally, it concludes with the challenges and future prospects of this research to help protect the ecosystem.

The selective adsorption performance and mechanism of multiwall magnetic carbon nanotubes for heavy metals in wastewater

The safe treatment of heavy metals in wastewater is directly related to human health and social development. In this paper, a new type of recyclable adsorbent is synthesized through the oxidation of enhancer and modification with magnetic nanoparticles. The new adsorbent not only inherits the advantages of multiwall carbon nanotubes (6O-MWCNTs), but also exhibits a new magnetic property and further improved adsorption capacity, which is conducive to the magnetic separation and recovery of heavy metals. The adsorption results indicate that multiwall magnetic carbon nanotubes (6O-MWCNTs@Fe₃O₄) have a good performance for Pb(II) selective adsorption, with a maximum adsorption capacity of 215.05 mg/g, much higher than the existing adsorption capacity of the same type of adsorbents. Under the action of an external magnetic field, 6O-MWCNTs@Fe₃O₄ that adsorbed metal ions can quickly achieve good separation from the solution. The joint characterization results of FTIR and XPS show that under the action of both coordination and electrostatic attraction, the C=O bond in the -COOH group is induced to open by the metal ions and transforms into an ionic bond, and the metal ions are stably adsorbed on the surface of 6O-MWCNTs@Fe₃O₄. Pb(II) has a stronger attraction than Cu(II) and Cd(II) to the lone pair of electrons in oxygen atoms to form complexes, due to the covalent index of Pb (6.41) is more larger than that of Cu (2.98) and Cd (2.71).These data provide a new type of recyclable adsorbent for the efficient treatment of heavy metal ions in wastewater and enrich relevant theoretical knowledge.

Heavy Metals Removal from Aqueous Solutions by Multiwall Carbon Nanotubes: Effect of MWCNTs Dispersion

Carbon nanotubes (CNTs) are one of the most studied nanoparticles due to their physical, chemical and electronic properties. However, strong Van der Waals bonds, which promote CNTs aggregation are usually present, affecting their unique properties. Avoiding CNTs aggregation is one of the main difficulties when using these nanoparticles. Regarding the adsorption capacity of CNTs, the tendency of CNTs to aggregate decreases the surface area available to retain contaminants. One way to overcome this issue is by changing the surface energy of CNTs through chemical (covalent and noncovalent methods) or mechanical stabilization, but there is not yet a unique solution to solve this problem. In this work, a chemical noncovalent method (addition of surfactants) combined with mechanical energy (ultrasounds) was applied for CNTs stabilization, and the influence in heavy metal ions removal, Pb (II), Cu (II), Ni (II) and Zn (II), an area of high environmental relevance, was evaluated. It was proved that high amounts of metals could be removed from water during the first eighteen hours. Competitive adsorption between heavy metals, during adsorption tests with the simultaneous presence of all ions, was also studied and it was possible to prove that the electronegativity and atomic radius of cations influence their removal. Pb (II) and Cu (II) were the metals removed in higher percentages, and Ni (II) and Zn (II) were the metals less removed during competitive adsorption. Finally, the results obtained show that MWCNTs, if adequately dispersed, present a good solution for the treatment of water contaminated with highly toxic heavy metals, even when using very low concentrations of Multiwall Carbon Nanotubes (MWCNTs).

A key role of inner-cation-π interaction in adsorption of Pb(II) on carbon nanotubes: Experimental and DFT studies

Herein the adsorption and desorption of Pb²⁺ on oxidized (O-CNTs) and graphitized multi-walled carbon nanotubes (G-CNTs) were studied, and detailed adsorption mechanisms were discussed by experimental characterization and density functional theory (DFT) calculation. The adsorption of Pb²⁺ on CNTs was co-guided by complexation, ion exchange, electrostatic and cation-π interactions. According to the abnormally low release ratio of Pb²⁺ on both O-CNTs and G-CNTs (<9.03%), the O-containing groups on CNTs surface are not the only key factor affecting the adsorption behavior. The pore filling and complexation are the main mechanisms leading to irreversible adsorption, especially the important role of the inner-cation-π interaction in Pb²⁺ adsorption into the inner channel of CNTs at the high initial Pb²⁺ concentration, and DFT calculations further confirmed this result. The adsorption energy of the inner-cation-π interaction between Pb²⁺ and CNTs can be as high as - 77.851 kJ/mol, which is much higher than other interactions (≤-41.488 kJ/mol). Moreover, the stability of various adsorption mechanisms by HOMO-LUMO energy gap (E_gap), electronic chemical potential (µ) and global hardness (η) were quantitatively measured and further revealed the inner-cation-π interaction is more stable. This study provides a deeper understanding of the removal of heavy metals by porous carbon-based nanomaterials.

Modified Moringa oleifera Lam. Seed husks as low-cost biosorbent for atrazine removal

Atrazine is an herbicide which is widely applied in sugarcane and corn crops. Its frequent use has resulted in environmental impacts, and its traces have been verified in surface and groundwater. Thus, it is necessary to remove this pollutant, and an alternative is the adsorption due to its universal nature, low-cost and ease of operation. Therefore, the objective of the present work was to study the adsorption capacity of atrazine by modified Moringa oleifera Lam. seed husks, a low-cost adsorbent. The biosorbent was subjected to c hemical and thermal treatment and was characterised by structural, morphological and textural analysis, which showed porous and heterogeneous characteristics, with a specific surface area of 5.77 m² g^-1. The kinetic study demonstrated equilibrium at 1200 min, with an adsorption capacity of 1.90 mg g^-1 and the best fit was for the pseudo-second-order model. The isotherms were obtained at 298, 308 and 318 K. The Freundlich, Temkin and Langmuir models were applied to the experimental data, the latter being the best. The values of the thermodynamic parameters indicated that the biosorption was spontaneous, endothermic and reversible. The highest adsorption capacity obtained was 10.32 mg g^-1, which was higher than several values found in the literature. The biosorbent was regenerated over three cycles, indicating its potential of atrazine removal from surface water.

Carbon-based sustainable nanomaterials for water treatment: State-of-art and future perspectives

The supply of safe drinking and clean water is becoming increasingly challenging proposition throughout the world. The deployment of environmentally sustainable nanomaterials with unique advantages namely high efficiency and selectivity, earth-abundance, recyclability, low-cost of production processes, and stability, has been a priority although several important challenges and constraints still remained unresolved. Carbon nanomaterials namely activated carbon, multi-walled- and single-walled carbon nanotubes, have been developed and applied as adsorbents for wastewater treatment and purification; graphene and graphene oxide-based nanomaterials as well as carbon and graphene quantum dots-derived nanomaterials have shown significant promise for water and wastewater treatment and purification, especially, for industrial- and pharmaceutical-laden wastes. This review encompasses advanced carbonaceous nanomaterials and methodologies that are deployed for the elimination of contaminants and ionic metals in aqueous media, and as novel nanosorbents for wastewater, drinking and ground water treatment. Additionally, recent trends and challenges pertaining to the sustainable carbon and graphene quantum dots-derived nanomaterials and their appliances for treating and purifying wastewater are highlighted.

Adsorption of Reactive Black 5 Dye from Aqueous Solutions by Carbon Nanotubes and its Electrochemical Regeneration Process

: Removal of Reactive Black 5 (RB5) dye from aqueous solutions was investigated by adsorption onto Multi-walled Carbon Nanotubes (MWCNTs) and Single-walled Carbon Nanotubes (SWCNTs). A Taguchi orthogonal design including pH, initial RB5 concentration, contact time, and CNTs dose, was used in 16 experiments. The results showed that all four factors were statistically significant, and the optimum conditions for both adsorbents were as follows: pH of 3, adsorbent dose of 1000 mg/L, RB5 concentrations of 25 mg/L, and contact time of 60 min. An equilibrium study by Isotherm Fitting Tool (ISOFIT) software showed that Langmuir isotherm provided the best fit for RB5 adsorption by CNTs. The maximum predicted adsorption capacities for the dye were obtained as 231.84 and 829.20 mg/g by MWCNTs and SWCNTs, respectively. The results also indicated that the adsorption capacity of SWCNTs was about 1.21 folds higher than that of MWCNTs. Studies of electrochemical regeneration were conducted, and the results demonstrated that RB5-loaded MWCNTs and SWCNTs could be regenerated (86.5% and 77.3%, respectively) using the electrochemical process. Adsorbent regeneration was mostly due to the degradation of the dye by the attack of active species such as chlorate, H2O2, and, •OH, which were generated by the electrochemical oxidation process with Ti/RuO2-IrO2-TiO2 anodes. The results of Gas Chromatography-Mass Spectrometry (GC-MS) analysis showed that acetic acid, 3-chlorobenzenesulfonamide, and 1,2-benzenedicarboxylic acid were produced after adsorbent regeneration by the electrochemical process in the solution of regeneration. The adsorption and regeneration cycles showed that the electrochemical process with Ti/RuO2-IrO2-TiO2 and graphite is a good alternative method for the regeneration of CNTs and simultaneous degradation of the dye.

Adsorption of Uremic Toxins Using Ti3C2Tx MXene for Dialysate Regeneration

The COVID-19 pandemic has become a major worldwide crisis. Although respiratory symptoms are a key feature of the disease, many people who are hospitalized with COVID-19 also suffer acute kidney injury, a condition that exacerbates patient mortality and may have to be treated through renal replacement therapy. Much of the focus on hospital capacity during the pandemic has centered on the availability of ventilators. However, supplies for dialysis treatment, including dialysate, have also run dangerously low in hospitals at the epicenter of the pandemic. Therefore, there is an urgent need to develop materials that can efficiently and rapidly regenerate dialysate, removing toxins and restoring electrolyte concentrations so that this vital resource remains readily available. In this work, Ti3C2Tx, a two-dimensional transition-metal carbide (MXene) that is known to efficiently adsorb urea, was used to remove creatinine and uric acid from an aqueous solution and dialysate, with a maximum adsorption capacity of 45.7 and 17.0 mg/g, respectively. We systematically analyzed and modeled the adsorption kinetics, isotherms, and thermodynamics, thus determining the rate-limiting step and adsorption mechanism. A fixed-bed column loaded with Ti3C2Tx was designed to further evaluate the adsorption performance under continuous fluid-flow conditions, mirroring conditions of continuous renal replacement therapy modalities. The maximum capacity and 50% breakthrough volume were calculated to further approach the practical application of Ti3C2Tx for removal of uremic toxins. Our findings suggest that Ti3C2Tx has the potential to be used as an efficient sorbent for the regeneration of dialysate, allowing for accelerated dialysate regeneration by removing filtered toxins and leading to more portable dialysis devices.

Fabrication of functionalized electrospun carbon nanofibers for enhancing lead-ion adsorption from aqueous solutions

Electrospinning technique is a simple and cheap method for fabrication of electrospun nanofibers (ENFs), which in turn can converted into electrospun carbon nanofibers (ECNFs) by carbonization process. The controlling of the ECNFs properties (e.g. surface area, porosity, diameters) during fabrication, make it superior over the other carbon nanomaterials. The aim of our study is to modify the surface of ECNFs to increase its hydrophilicity and in turn its efficiency in removing lead ions (Pb2+) from aqueous systems. The surface modification was carried out in two steps starting from oxidation of pristine ECNFs to produce oxidized ECNFs (o-ECNFs), followed by covalently bonded of melamine, and poly(m-phenylene diamine) for forming melamine-functionalized ECNFs (melam-ECNFs) and poly(m-phenylene diamine)-functionalized ECNFs (PmPDA-ECNFs), respectively. The as-prepared materials were characterized in routine way. The ability of the as-prepared materials towards adsorption of Pb2+ ions as heavy metal was investigated with the study of some factors such as pH solution, contact time, initial concentration and temperature. The adsorption process was analyzed isothermally, and kinetically. According to the values of the thermodynamic parameters, the adsorption of Pb2+ ions onto the functionalized ECNFs was endothermic and spontaneous, except with melam-ECNFs was exothermic.

Synthesis of super hydrophilic cellulose-alpha zirconium phosphate ion exchange membrane via surface coating for the removal of heavy metals from wastewater

In this study, commercial cellulose membranes were surface coated with alpha‑zirconium phosphate nanoparticles (α-ZrP-n) to study their impact on the overall removal efficiency of heavy metals from synthetic metal mixture wastewater solution. A total of four homogeneous solutions (0.25, 0.50, 0.75, and 1.00 wt%) of α-ZrP-n were prepared by sonicating the nanoparticles in deionized water. These solutions were used to surface coat the commercial cellulose membranes. The Scanning Electron Microscopy (SEM) along with Energy Dispersive Spectroscopy (EDS) were used to confirm the attachment of α-ZrP-n on the cellulose membrane surface. Furthermore, the structural characteristics of the α-ZrP-n modified cellulose membranes were also studied. The water contact angle results showed that all coated membranes remained super-hydrophilic. The porosity of the membranes decreased to 48% with the addition of 1.00 wt% α-ZrP-n compared to 65% for the pristine membrane. The mechanical strength has improved from 3.4 MPa for the pristine membrane to about 4 MPa for the 1.00 wt% α-ZrP-n membrane. Similarly, the thermal stability was found to be slightly enhanced as evidenced by the increase in decomposition temperature to 280 and 285 °C in the 0.75 and 1.00 wt% α-ZrP-n membranes, respectively. Furthermore, a removal efficiency of 97.0 ± 0.6, 98.0 ± 0.5, 99.5 ± 0.2, and 91.5 ± 2.0% for Cu (II), Zn (II), Ni (II), and Pb (II), respectively, was observed with the 0.50 wt% α-ZrP-n membrane. This removal was achieved at a flux of 41.85 ± 0.87 × 10³ LMH. Increasing the α-ZrP-n concentration further did not show any improvement in the overall removal efficiency. However, it led to 46% flux reduction in the 1.00 wt% α-ZrP-n membrane. The mechanism of removal of the heavy metal ions was postulated to be a combination of ion exchange and electrostatic attraction of the strong negatively charged α-ZrP-n membranes and the free metal ions in the wastewater solution.

Assessment of heavy metal pollution from anthropogenic activities and remediation strategies: A review

Heavy metal pollution is a nefarious issue with implications for life. Heavy metals are natural occurring elements, having both natural and anthropogenic sources. The latter are however the most significant, releasing greater amounts of these pollutants in more toxic and mobile forms. Their chemistry and dynamics in the ecosystems are presented, and the relation to the pollution problematic thereof is discussed. The concentration of heavy metals in several sites, assessed in water, soil and sediment samples, affected by different pollution sources are reviewed. These evidence how human activities impact natural media and how the pollution spreads. The pollution in each media is assessed by the concentration relative to drinking and irrigation water guidelines, and by the geoaccumulation index of soils and sediments. It is found that ore extraction and processing and metallurgical industries stand atop the most polluting sources. Given the dynamics of heavy metal cations and that, most of these are released in liquid effluents, wastewater treatment techniques for the removal of heavy metals are also surveyed and critically discussed. Economic viability at a large municipal scale and the ability to comply with strict regulations are the determining factors in the selection of these techniques. A critical discussion on the viability of such techniques is made, reviewing some literature studies and commenting on their applicability on the previously found polluted media.

Study of Cu (II), Co (II), Ni (II) and Pb (II) removal from aqueous solutions using magnetic Prussian blue nano-sorbent

In this study magnetic Prussian blue (MPB) was synthesized and applied as sorbent for the efficient removal of heavy metals (Cu (II), Co (II), Ni (II) and Pb (II)) from aqueous solution. The average diameter of nanoparticles was found to be about 15 nm. The experimental results were fitted to Langmuir, Freundlich and Dubinin-Radushkevich models with high regression coefficients. The kinetics data were expressed by pseudo-first-order, pseudo-second-order and intraparticle diffusion models. The influence of initial concentration, sorbent dosage and time on the heavy metals sorption efficiency was studied using response surface methodology (RSM). Analysis of variance (ANOVA) was included to assess the adequacy of the model.

Nanomaterials for the Removal of Heavy Metals from Wastewater

Removal of contaminants in wastewater, such as heavy metals, has become a severe problem in the world. Numerous technologies have been developed to deal with this problem. As an emerging technology, nanotechnology has been gaining increasing interest and many nanomaterials have been developed to remove heavy metals from polluted water, due to their excellent features resulting from the nanometer effect. In this work, novel nanomaterials, including carbon-based nanomaterials, zero-valent metal, metal-oxide based nanomaterials, and nanocomposites, and their applications for the removal of heavy metal ions from wastewater were systematically reviewed. Their efficiency, limitations, and advantages were compared and discussed. Furthermore, the promising perspective of nanomaterials in environmental applications was also discussed and potential directions for future work were suggested.

Challenges and opportunities in functional carbon nanotubes for membrane-based water treatment and desalination

Environmental applications of carbon nanotubes (CNTs) have grabbed worldwide attentions due to their excellent adsorption capacities and promising physical, chemical and mechanical properties. The functionalization of CNTs, which involves chemical/physical modification of pristine CNTs with different types of functional groups, improves the capabilities of CNT for desalination and/or removals of waterborne contaminants. This paper intends to provide a comprehensive review of functional CNT materials (f-CNT) and their existing and potential applications in membrane-based water treatment and desalination processes, with focuses on critical evaluation of advances, knowledge gaps and future research directions. CNT nanocomposite membranes have been studied at bench scale to efficiently remove a variety of waterborne contaminants and salts, while future improvement is under way with development in CNT functionalization techniques. The CNT-based membrane applications are found to possess a variety of advantages, including improve water permeability, high selectivity and antifouling capability. However, their applications at full scale are still limited by their high cost. Finally, we highlight that f-CNT membranes with promising removal efficiencies for respective contaminants be considered for commercialization and to achieve holistic performance for the purpose of water treatment and desalination.

Efficient adsorption of multiple heavy metals with tailored silica aerogel-like materials

Recently developed tailored adsorbents for heavy metal uptake are studied in batch tests with Cu, Pb, Cd, Ni, Cr and Zn, in order to decontaminate polluted environments where these heavy metals are found in solution - water courses and groundwater. The adsorbents feature mercapto or amine-mercapto groups that are capable of complexating the cations. Through the use of equilibrium tests it is found that a remarkably high heavy metal uptake is obtained for all metals (ranging from 84 to 140 mg/g). These uptake values are quite impressive when compared to other adsorbents reported in the literature, which is also due to the double functionalization present in one of the adsorbents. For the best adsorbent, adsorption capacities followed the order Cu(II) > Pb(II) > Zn(II) > Cr(III) > Cd(II) > Ni(II). With these adsorbents, the removal process was fast with most of the metals being removed in less than 1 h. Competitive sorption tests were performed in tertiary mixtures that were based on real world polluted sites. It was found that although competitive sorption occurs, affecting the individual removal of each metal, all the cations in solution still interact with the adsorbent, achieving removal values that make this type of material very interesting for its proposed application.

A Comparison of Electrochemical Performance of Carbon Aerogels with Adsorption Metal Ions for Super Capacitors

Environmental problems caused by metal ions have caused widespread concern in recent years. In this work, carbon aerogels (CAs) adsorbing different metal ions were prepared. The adsorption performance and kinetics of metal ions (Cu(II), Cr(VI), and Fe(III)) on carbon aerogels were systematically investigated. The results indicated that the maximum adsorption capacity of Cu(II) was 424 mg·g⁻¹ in 600 mg·L⁻¹ copper solution. Adsorption performances of Cu(II), Cr(VI), and Fe(III) on CAs well fitted with a pseudo-second-order kinetic model. The structures and morphologies of metal-containing samples were characterized by scanning electron micrographs (SEM), Energy Dispersive Spectrometer (EDS), transmission electron microscope (TEM), and X-ray diffraction (XRD). The results demonstrated that the texture and electrochemical performance of CAs adsorbing metal ions exhibited a clear change. The specific surface area of CAs for adsorbing copper ions was 450 m²·g⁻¹ and they showed a small average pore diameter (7.16 nm). Furthermore, CAs adsorbing metals could be used for the super capacitor. The specific capacitance of CAs adsorbing copper ions could reach 255 F·g⁻¹ at a current density of 1.0 A·g⁻¹. The CA-Cu electrode materials exhibited excellent reversibility with a cycling efficiency of 97% after 5000 cycles.

Persimmon leaf bio-waste for adsorptive removal of heavy metals from aqueous solution

The aim of this study was to investigate heavy metal removal using waste biomass adsorbent, persimmon leaves, in an aqueous solution. Persimmon leaves, which are biomaterials, have a large number of hydroxyl groups and are highly suitable for removal of heavy metals. Therefore, in this study, we investigated the possibility of removal of Cu, Pb, and Cd in aqueous solution by using raw persimmon leaves (RPL) and dried persimmon leaves (DPL). Removal of heavy metals by RPL and DPL showed that DPL had a 10%-15% higher removal than RPL, and the order of removal efficiency was found to be Pb > Cu > Cd. The pseudo-second order model was a better fit to the heavy metal adsorption experiments using RPL and DPL than the pseudo-first order model. The adsorption of Cu, Pb, and Cd by DPL was more suitable with the Freundlich isothermal adsorption and showed an ion exchange reaction which occurred in the uneven adsorption surface layer. The maximum adsorption capacity of Cu, Pb, and Cd was determined to be 19.42 mg/g, 22.59 mg/g, and 18.26 mg/g, respectively. The result of the adsorption experiments showed that the n value was higher than 2 regardless of the dose, indicating that the heavy metal adsorption on DPL was easy. In the thermodynamic experiment, ΔG° was a negative value, and ΔH° and ΔS° were positive values. It can be seen that the heavy metal adsorption process using DPL was spontaneous in nature and was an endothermic process. Moreover, as the temperature increased, the adsorption increased, and the affinity of heavy metal adsorption to DPL was very good. This experiment, in which heavy metals are removed using the waste biomass of persimmon leaves is an eco-friendly new bioadsorbent method because it can remove heavy metals without using chemicals while utilizing waste recycling.

Nitrogen-containing amino compounds functionalized graphene oxide: Synthesis, characterization and application for the removal of pollutants from wastewater: A review

Nowadays, using graphene oxide (GO) as an adsorbent for removing pollutants from wastewater has attracted increasing attention due to its unique physic-chemical properties. Nitrogen-containing amino (NA) compounds have excellently complexing properties due to their abundant amino functional groups. In order to obtain an innovative adsorbent, functionalized GO (NAGO) has been developed by combining the properties of GO with the advantages of NA compounds. The obtained NAGO composites usually exhibit great improvement in adsorption properties and can be used as a promising adsorbent for decontamination of wastewater. This paper reviewed recent progress of synthetic technologies about fabricating various NAGOs, and their morphologies, structures and functional characteristics. Meanwhile, important applications of NAGOs for different kind of pollutants and theory of the adsorption phenomena are discussed based on the isothermal and kinetic adsorption models. Furthermore, the affecting factors, underlying mechanisms and comparison with other adsorbents for the removal of pollutants are reviewed. Conclusively, the perspectives and challenges involved in the application of NAGOs for decontamination of wastewater have also been proposed to promote sustainable development of this new exciting field.

The modelling of lead removal from water by deep eutectic solvents functionalized CNTs: artificial neural network (ANN) approach

The main challenge in the lead removal simulation is the behaviour of non-linearity relationships between the process parameters. The conventional modelling technique usually deals with this problem by a linear method. The substitute modelling technique is an artificial neural network (ANN) system, and it is selected to reflect the non-linearity in the interaction among the variables in the function. Herein, synthesized deep eutectic solvents were used as a functionalized agent with carbon nanotubes as adsorbents of Pb²⁺. Different parameters were used in the adsorption study including pH (2.7 to 7), adsorbent dosage (5 to 20 mg), contact time (3 to 900 min) and Pb²⁺ initial concentration (3 to 60 mg/l). The number of experimental trials to feed and train the system was 158 runs conveyed in laboratory scale. Two ANN types were designed in this work, the feed-forward back-propagation and layer recurrent; both methods are compared based on their predictive proficiency in terms of the mean square error (MSE), root mean square error, relative root mean square error, mean absolute percentage error and determination coefficient (R²) based on the testing dataset. The ANN model of lead removal was subjected to accuracy determination and the results showed R² of 0.9956 with MSE of 1.66 × 10^-4. The maximum relative error is 14.93% for the feed-forward back-propagation neural network model.

Optimization of sulfate removal from wastewater using magnetic multi-walled carbon nanotubes by response surface methodology

This paper reports a facile method for removal of sulfate from wastewater by magnetic multi-walled carbon nanotubes (MMWCNTs). Multi-walled carbon nanotubes and MMWCNTs were characterized by X-ray diffraction, Raman, transmission electron microscopy, Fourier transform infrared spectroscopy, and vibrating sample magnetometry. The results of the analysis indicated that MMWCNTs were synthesized successfully. The MMWCNTs can be easily manipulated in a magnetic field for the desired separation, leading to the removal of sulfate from wastewater. Response surface methodology (RSM) coupled with central composite design was applied to evaluate the effects of D/C (adsorbent dosage per initial concentration of pollutant (mg_adsorbent/(mg/l)_initial)) and pH on sulfate removal (%). Using RSM methodology, a quadratic polynomial equation was obtained, for removal of sulfate, by multiple regression analysis. The optimum combination for maximum sulfate removal of 93.28% was pH = 5.96 and D/C = 24.35. The experimental data were evaluated by the Langmuir and Freundlich adsorption models. The adsorption capacity of sulfate in the studied concentration range was 56.94 (mg/g). It was found out that the MMWCNTs could be considered as a promising adsorbent for the removal of sulfate from wastewater.

Adsorption of Cu (II), Pb (II) and Cr (VI) from aqueous solutions using black wattle tannin-immobilized nanocellulose

A novel nanocomposite based on black wattle (BW) tannin and nanocellulose was prepared and applied in heavy metal ions adsorptive removal from aqueous solutions. Firstly, nanocrystalline cellulose was oxidized by sodium periodate to get dialdehyde nanocellulose (DANC). BW tannin was then covalently immobilized onto DANC, which was used as both the matrix and crosslinker, to obtain tannin-nanocellulose (TNCC) composite. The resulting nanocomposite was characterized using FTIR, AFM, and TG. The successful immobilization was confirmed by the chromogenic reaction between FeCl₃ and TNCC and FT-IR analysis. AFM images revealed that TNCC was ellipsoidal particles with lengths ranging from 100-400nm. Zeta potential measurement showed that TNCC was negative charged at a pH range from 1-12. Compared to the original tannin, the thermal stability of TNCC was slightly increased by the addition of nanocellulose. TNCC demonstrated the maximum adsorption efficiency at pH2 for Cr(VI) and pH 6 for Cu(II) and Pb(II), respectively. The adsorption for these three metal ions followed pseudo second-order kinetics, indicating the chemisorption nature. The adsorption isotherms all fitted well with the Sips model, and the calculated maximum adsorption capacities were 51.846mgg^-1, 53.371mgg^-1 and 104.592mgg^-1 for Cu(II), Pb(II) and Cr (VI), respectively.

Design and function of biomimetic multilayer water purification membranes

Multilayer architectures in water purification membranes enable increased water throughput, high filter efficiency, and high molecular loading capacity. However, the preparation of membranes with well-organized multilayer structures, starting from the nanoscale to maximize filtration efficiency, remains a challenge. We report a complete strategy to fully realize a novel biomaterial-based multilayer nanoporous membrane via the integration of computational simulation and experimental fabrication. Our comparative computational simulations, based on coarse-grained models of protein nanofibrils and mineral plates, reveal that the multilayer structure can only form with weak interactions between nanofibrils and mineral plates. We demonstrate experimentally that silk nanofibril (SNF) and hydroxyapatite (HAP) can be used to fabricate highly ordered multilayer membranes with nanoporous features by combining protein self-assembly and in situ biomineralization. The production is optimized to be a simple and highly repeatable process that does not require sophisticated equipment and is suitable for scaled production of low-cost water purification membranes. These membranes not only show ultrafast water penetration but also exhibit broad utility and high efficiency of removal and even reuse (in some cases) of contaminants, including heavy metal ions, dyes, proteins, and other nanoparticles in water. Our biomimetic design and synthesis of these functional SNF/HAP materials have established a paradigm that could lead to the large-scale, low-cost production of multilayer materials with broad spectrum and efficiency for water purification, with applications in wastewater treatment, biomedicine, food industry, and the life sciences.