Development of 3D Printed Biodegradable, Entirely X-ray Visible Stents for Rabbit Carotid Artery Implantation

Biodegradable stents are considered a promising strategy for the endovascular treatment of cerebrovascular diseases. The visualization of biodegradable stents is of significance during the implantation and long-term follow-up. Endowing biodegradable stents with X-ray radiopacity can overcome the weakness of intrinsic radioparency of polymers. Hence, this work focuses on the development of an entirely X-ray visible biodegradable stent (PCL-KIO3 ) composed of polycaprolactone (PCL) and potassium iodate via physical blending and 3D printing. The in vitro results show that the introduction of potassium iodate makes the 3D-printed PCL stents visualizable under X-ray. So far, there is inadequate study about polymeric stent visualization in vivo. Therefore, PCL-KIO3 stents are implanted into the rabbit carotid artery to evaluate the biosafety and visibility performance. During stent deployment, the visualization of the PCL-KIO3 stent effectively helps to understand the position and dilation status of stents. At 6-month follow-up, the PCL-KIO3 stent could still be observed under X-ray and maintains excellent vessel patency. To sum up, this study demonstrates that PCL-KIO3 stent may provide a robust strategy for biodegradable stent visualization.

Dual-mode security authentication of SrAl2 O4 :Eu,Dy phosphor encapsulated in electrospun cellulose acetate nanofibrous films

Photochromic inks have been an attractive authentication strategy to improve the anti-counterfeiting efficiency of commercial products. However, recent reports have shown significant disadvantages with photochromic inks, including poor durability and high cost. In this context, we developed novel photochromic nanofibres for advanced anti-counterfeiting applications. Lanthanide-doped strontium aluminate (LdSA) nanoparticles (NPs) were prepared and immobilized into electrospun cellulose acetate nanofibres (CANF). Authentication materials immobilized with inorganic photochromic agents can warranty durability and photostability. Therefore, the ultraviolet-stimulated photochromism of LdSA-encapsulated cellulose acetate nanofibres (LdSA@CANF) demonstrated high reversibility and photostability. A broad range of cellulose acetate nanofibres with unique emission characteristics was developed when applying different ratios of LdSA NPs. LdSA@CANF appeared colourless under visible daylight, whereas a green emission was monitored under ultraviolet-light illumination. The shape and chemical content of the photochromic fibrous films were examined using various analytical techniques. The mechanical characteristics of LdSA@CANF-coated paper were investigated. The emission wavelength was detected at 514 nm to designate green colour, whereas the excitation wavelength was detected at 369 nm to indicate transparency. The prepared cellulose acetate nanofibrous film can be described as an efficient strategy for the anti-counterfeiting of commercialized items.

Photoluminescent polymer-based smart window reinforced with electrospun glass nanofibers

Poly (vinyl chloride) (PVC) was reinforced with electrospun glass nanofibers (EGN) to develop photochromic and afterglow materials such as smart windows and anti-counterfeiting prints. Colorless electrospun glass nanofibers@poly (vinyl chloride) (EGN@PVC) sheet was prepared by physical integration of lanthanide-doped aluminate nanoparticles (LANP). The low concentrations of LANP in the photochromic and photoluminescent EGN@PVC hybrids displayed fluorescence emission with instant reversibility. EGN@PVC with the highest phosphor concentrations showed persistent phosphorescence emission with slow reversibility. Based on the results of CIE Lab and luminescence spectroscopy, the translucent EGN@PVC samples became green in the presence of ultraviolet illumination and greenish-yellow in the absence of light. According to scanning electron microscopy (SEM) and transmission electron microscopy (TEM) analyses, the morphological study of EGN and LANP showed diameters of 75-95 nm and 11-19 nm, respectively. The morphology of the EGN@PVC substrates was studied using SEM, X-ray fluorescence (XRF) and energy-dispersive X-ray spectroscopy (EDXA). The mechanical characteristics of PVC were enhanced by reinforcement with EGN as a roughening agent. When comparing the scratching resistance of LANP-free substrate to photoluminescent EGN@PVC substrates, it was observed that the latter was much superior. The photoluminescence spectra were reported to have an emission peak at 519 nm when excited at 365 nm. The findings demonstrated that the luminous transparent EGN@PVC composites had improved superhydrophobic and UV blocking characteristics.

Current Advancements and Strategies of Biomaterials for Tendon Repair: A Review

Tendon is a bundle of tissue comprising of a large number of collagen fibers that connects muscle to bone. However, overuse or trauma may cause degeneration and rupture of the tendon tissues, which imposes an enormous health burden on patients. In addition to autogenous and allogeneic transplantation, which is commonly used in the clinic, the current research on tendon repair is focused on developing an appropriate scaffold via biomaterials and fabrication technology. The development of a scaffold that matches the structure and mechanics of the natural tendon is the key to the success of the repair, so the synergistic optimization of the scaffold fabrication technology and biomaterials has always been a concern of researchers. A series of strategies include the preparation of scaffolds by electrospinning and 3D printing, as well as the application of injectable hydrogels and microspheres, which can be used individually or in combination with cells, growth factors for tendon repair. This review introduces the tendon tissue structure, the repair process, the application of scaffolds, and the current challenges facing biomaterials, and gives an outlook on future research directions. With biomaterials and technology continuing to be developed, we envision that the scaffolds could have an important impact on the application of tendon repair.

Synthesis of oxidized sodium alginate and its electrospun bio-hybrids with zinc oxide nanoparticles to promote wound healing

Electrospun fibers provide a promising platform for wound healing; however, they lack requisite characteristics for wound repair, including antibacterial and anti-inflammatory properties and angiogenic ability. Sodium alginate (SA) is being used for different types of applications. However, the poor spinnability of SA restricts its applications. The objectives of this study were three-fold: a) to synthesize oxidized sodium alginate (OSA) to improve its spinnability, b) to fabricate composite fibrous membranes by blending OSA along with zinc oxide nanoparticles (ZnO-NPs), and c) to decipher antibacterial and anti-inflammatory properties as well as biocompatibility of membranes in vitro and in vivo. OSA displaying different oxidation degrees (Dox (%)) was synthesized by varying the molar ratio of sodium periodate to SA. OSA (Dox, ∼48 %) afforded smooth and uniform fibers; 0.5 wt% of adipic dihydrazide (ADH) evolved into structurally stable and water-insoluble membranes. Composite fibrous membranes containing 2 wt% of ZnO-NPs displayed good biocompatibility and bactericidal effect against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) in vitro. In addition, composite membranes showed remarkable epithelialization, neovascularization, and anti-inflammatory response than that of the membranes devoid of ZnO-NPs. Conclusively, these composite fibrous membranes may have broad implications for wound healing applications.

A photocrosslinking antibacterial decellularized matrix hydrogel with nanofiber for cutaneous wound healing

ddECMMA is the methacrylating product of decellularized dermal extracellular matrix with biological signals and capable of photocrosslinking. Thiolated chitosan (TCS) is an effective antibacterial component. PCLPBA is a kind of plasma-treated polycaprolactone nanofiber dispersions (PCLP) that regulates macrophage polarization and promotes angiogenesis. In this study, we obtained ddECMMA via methacrylation reaction. TCS was prepared by reaction between chitosan and thioglycolic acid. PCLPBA was fabricated via reaction between PCLP and 3-buten-1-amine. TCS and PCLPBA were mixed in ddECMMA solution and photocrosslinked to form DTP4 hydrogel. The hydrogel showed rapid gelation, good mechanical strength, antibacterial and antioxidant properties. When it was cocultured with NIH 3T3 cells, the cells showed good morphology and proliferation rate. After applying it to the full-thickness cutaneous wound, wounds almost healed in 2 weeks via re-epithelialization and neovascularization with negligible scar tissue. The results indicate that DTP4 hydrogel is a promising candidate for clinic skin wound healing.

Synergistic effect of glucagon-like peptide-1 analogue liraglutide and ZnO on the antibacterial, hemostatic, and wound healing properties of nanofibrous dressings

Bacterial infections and poor vascularization delay wound healing, thus necessitating alternative strategies for functional wound dressings. Zinc oxide (ZnO) has been shown to exert a potent antibacterial effect against bacterial species. Similarly, Glucagon-like peptide-1 (GLP-1) analogue liraglutide (LG) has been shown to promote vascularization and improve wound healing. The objective of this research was to investigate the synergistic effect of ZnO nanoparticles (ZnO-NPs) and LG to simultaneously induce antibacterial, hemostatic, and vascularization effects for infected wound healing. Electrospun poly (l-lactide-co-glycolide)/gelatin (PLGA/Gel) membranes containing ZnO-NPs and LG displayed good biocompatibility and hemostatic ability. Both, ZnO-NPs and LG exhibited synergistic antibacterial effect against Staphylococcus aureus and Escherichia coli as well as improved the migration and tubule-like network formation of human umbilical vein endothelial cells (HUVECs) in vitro. Once evaluated in a bacterial-infected wound model in rats, the membranes loaded with ZnO-NPs and LG effectively promoted wound healing causing significant reduction in wound area and scar-like tissue formation. Therefore, ZnO-NPs/LG synergism may offer an invaluable solution for the treatment of poorly healing infected wounds.

Composite Superelastic Aerogel Scaffolds Containing Flexible SiO2 Nanofibers Promote Bone Regeneration

Repairing irregular-shaped bone defects poses enormous challenges. Scaffolds that can fully fit the defect site and simultaneously induce osteogenesis and angiogenesis hold great promise for bone defect healing. This study aimed to produce superelastic organic/inorganic composite aerogel scaffolds by blending silica nanofibers (SiO₂ ) and poly (lactic acid)/gelatin (PLA/gel) nanofibers; the content of SiO₂ nanofibers were varied from 0-60 wt% (e.g., PLA/gel, PLA/gel/SiO₂ -L, PLA/gel/SiO₂ -M, and PLA/gel/SiO₂ -H for 0%, 20%, 40%, and 60% of SiO₂ nanofibers, respectively) to produce a range of scaffolds. The PLA/gel/SiO₂ -M scaffold had excellent elasticity and good mechanical properties. In vitro experiments demonstrated that the silicon ions released from PLA/gel/SiO₂ -M scaffolds could promote the differentiation of rat bone marrow-derived mesenchymal stem cells (rBMSCs) into osteoblasts, thereby enhancing alkaline phosphatase activity and bone-related genes expressions. Meanwhile, the released silicon ions also promoted the proliferation of human umbilical vein endothelial cells (HUVECs) and the expression of vascular endothelial growth factors, thereby promoting angiogenesis. The assessment of these scaffolds in a calvarial defect model in rats showed good potential of PLA/gel/SiO₂ -M to induce bone regeneration as well as promote osteogenesis and angiogenesis. Overall, these superelastic scaffolds containing flexible SiO₂ nanofibers can simultaneously induce osteogenesis and angiogenesis, which may have broad applications for tissue engineering applications. This article is protected by copyright. All rights reserved.

Prodrug inspired bi-layered electrospun membrane with properties of enhanced tissue integration for guided tissue regeneration

Guided tissue regeneration (GTR) membranes play a vital role in periodontal surgery. Recently a series of composite electrospun membranes have been fabricated to improve the unexpected biodegradation of collagen-based GTR membranes. However, their tissue integrity needs to be studied in depth. In this study, a bi-layered electrospun membrane (BEM) inspired by "prodrug" was fabricated, which contained a dense-layer (BEM-DL) and a potential loose-layer (BEM-LL). The nanofibers of BEM-DL were composed of poly(l-lactic-co-glycolic acid) and tilapia skin collagen (TSC). Whereas the BEM-LL consisted of two types of nanofibers, one was the same as BEM-DL and the other was made from TSC. The morphology, degradation in vitro, cytocompatibility and biocompatibility in rats were investigated with a poly(lactic-co-glycolic acid) electrospun membrane (PLGA) as the negative control. The pore size of BEM-LL soaked for 7 days became larger than the original sample (164.8 ± 90.9 and 52.5 ± 21.0 μm² , respectively), which was significantly higher (p < .05) than that of BEM-DL and PLGA. The BEM-LL displayed a larger weight loss rate of 82.3 ± 3.6% than the BEM-DL of 46.0 ± 2.8% at day 7 because of the rapid degradation of TSC fibers. The cytocompatibility test demonstrated that L929 cells were only spread on the surface of the BEM-DL while MC3T3-E1 cells grew into the BEM-LL layer. The subcutaneous implantation test further proved that BEM-DL performed as a cellular barrier, whereas BEM-LL was conducive to cell infiltration as deep as 200 μm with reduced fibrous encapsulation. Herein, the BEM inspired by "prodrug" is a promising GTR membrane with a property of enhanced tissue integration.

Immobilization of lanthanide doped aluminate phosphor onto recycled polyester toward the development of long-persistent photoluminescence smart window

Smart window can be defined as switchable material whose light transmission is altered upon exposure to light, voltage, or heat. However, smart windows usually produced from expensive and breakable glass materials. Herein, transparent smart window with long-persistent phosphorescence, high optical transmittance, ultraviolet protection, rigid, high photostability and durability, and superhydrophobicity was developed from recycled polyester (PET). Recycled polyester waste (RBW) was simply immobilized with different ratios of lanthanide-doped aluminate nanoparticles (LdAN) to provide a long-persistent phosphorescent polyester smart window (LdAN@PET) with an ability to persist emitting light for extended time periods. The solid-state high temperature technique was used to prepare LdA micro-scale powder. Then, the top-down technique was applied to afford the corresponding LdA nanoparticles. Recycled shredded recycled polyester bottles were charged into a hot bath to provide a clear plastic shred bulk, which was then well-mixed with LdAN and drop-casted to provide long-persistent luminescent smart window. In order to improve the phosphor dispersion in the PET bulk, LdAN was synthesized in the nanoparticle form which was characterized utilizing transmission electron microscope (TEM). For better preparation of translucent smart window of long-persistent phosphorescent polyester, LdAN must be homogeneously dispersed in the PET matrix without agglomeration. The morphology and chemical composition were studied by infrared spectra (FT-IR), X-ray fluorescent (XRF) analysis, scanning electron microscopy (SEM), and energy-dispersion X-ray analyzer (EDS). In addition, spectral profiles of excitation and emission, and decay and lifetime were used to better understand the photoluminescence properties. The hardness properties were also investigated. The developed phosphorescent transparent polyester smart window demonstrated a color switch to intense green underneath UV irradiation and greenish-yellow under darkness as verified by CIE Lab color parameters. The afterglow polyester smart window showed an absorption wavelength at 365 nm and two phosphorescence intensities at 442 and 512 nm. An enhanced UV protection, photostability and hydrophobic activity were detected. The luminescent polyester substrates with lower LdAN ratios demonstrated rapid and reversible fluorescent photochromic activity beneath the UV light. The luminescent polyester substrates with higher LdAN contents displayed long-persistent phosphorescence afterglow. The current strategy can be simply applied for the production of smart windows, low thickness anticounterfeiting films and warning signs.

Converging 3D Printing and Electrospinning: Effect of Poly(l-lactide)/Gelatin Based Short Nanofibers Aerogels on Tracheal Regeneration

Recently, various tissue engineering based strategies have been pursued for the regeneration of tracheal tissues. However, previously developed tracheal scaffolds do not accurately mimic the microstructure and mechanical behavior of the native trachea, which restrict their clinical translation. Here, tracheal scaffolds are fabricated by using 3D printing and short nanofibers (SF) dispersion of poly(l-lactide)/gelatin (0.5-1.5 wt%) to afford tracheal constructs. The results display that the scaffolds containing 1.0 wt % of SF exhibit low density, good water absorption capacity, reasonable degradation rate, and stable mechanical properties, which were comparable to the native trachea. Moreover, the designed scaffolds possess good biocompatibility and promote the growth and infiltration of chondrocytes in vitro. The biocompatibility of tracheal scaffolds is further assessed after subcutaneous implantation in mice for up to 4 and 8 weeks. Histological assessment of tracheal constructs explanted at week 4 shows that scaffolds can maintain their structural integrity and support the formation of neo-vessels. Furthermore, cell-scaffold constructs gradually form cartilage-like tissues, which mature with time. Collectively, these engineered tracheal scaffolds not only possess appropriate mechanical properties to afford a stabilized structure but also a biomimetic extracellular matrix-like structure to accomplish tissue regeneration, which may have broad implications for tracheal regeneration.

Preparation of Multifunctional Plasma Cured Cellulose Fibers Coated with Photo-Induced Nanocomposite toward Self-Cleaning and Antibacterial Textiles

Multifunctional fibrous surfaces with ultraviolet protection, self-cleaning, or antibacterial activity have been highly attractive. Nanocomposites consisting of silver (AgNPs) and titanium dioxide (TiO₂ NPs) nanoparticles (Ag/TiO₂) were developed and coated onto the surface of viscose fibers employing a straightforward pad-dry-cure procedure. The morphologies and elemental compositions were evaluated by scan electron microscopy (SEM), infrared spectra (FTIR), and energy-dispersion X-ray spectra (EDS). The resultant multifunctional textile materials displayed antibacterial and photo-induced catalytic properties. The photocatalyzed self-cleaning properties were investigated employing the photochemical decay of methylthioninium chloride, whereas the antibacterial properties were studied versus E. coli. The viscose fibers coated with Ag/TiO₂ nanocomposite demonstrated improved efficiency compared with viscose fibers coated with pure anatase TiO₂ nano-scaled particles.

Preparation and Characterization of Nanofibrous Scaffolds of Ag/Vanadate Hydroxyapatite Encapsulated into Polycaprolactone: Morphology, Mechanical, and In Vitro Cells Adhesion

Series of nanofibrous composites of polycaprolactone (PCL) were fabricated in different compositions of modified hydroxyapatite (HAP). The encapsulated HAP was co-doped with Ag/vanadate ions at different Ag contributions. XRD and FTIR techniques confirmed the powder and fibrous phase formation. Further, the morphological and mechanical behaviors of the electrospun nanofibrous scaffolds containing hydroxyapatite were investigated. The nanofibrous phases were biologically evaluated via studying contact angle, antibacterial, cell viability, and in vitro growth of human fibroblasts cell line (HFB4). It is obvious that silver ions cause gradual deviation in powder grains from wafer-like to cloudy grains. The maximum height of the roughness (Rt) ranged from 902.0 to 956.9 nm, while the valley depth of the roughness (Rv) ranged from 308.3 to 442.8 nm, for the lowest and the highest additional Ag ions for powdered phases. Moreover, the highest contribution of silver through the nanofibrous phases leads to the formation of lowest filaments size ranged from 0.07 to 0.53 µm. Further, the fracture strength was increased exponentially from 2.51 ± 0.35 MPa at zero concentration of silver ions up to 4.23 ± 0.64 MPa at 0.6 Ag/V-HAP@PCL. The fibrous phases were biologically evaluated in terms of antibacterial, cell viability, and in vitro growth of human fibroblasts cell line (HFB4). The nanofibrous composition of 0.8 Ag/V-HAP@PCL reached the maximum potential against E. coli and S. aureus and recorded 20.3 ± 1.1 and 19.8 ± 1.2 mm, respectively. This significant performance of the antibacterial activity and cell viability of co-doped HAP distributed through PCL could recommend these compositions for more research in biological applications, including wound healing.

Fabrication of Sustained Release System of Electrospun Poly(acrylic acid)/Dextran Nanofibers Using Emulsion Electrospinning as Wound Dressing Applications

The burst release of drug is a problem associated with the use of common blending electrospinning. This problem can be avoided via fabrication of core-shell nanofibers where drug can be coated with polymer nanofibers as a shell. Moreover, there is a need to provide wound dressing with prolonged system of sustained release to accelerate the recovery of the wound. Currently, electrospun ciprofloxacin loaded poly(acrylic acid)/Dextran (Cipro@PAA/Dex) core-shell nanofibers can be prepared in green method using emulsion electrospinning. For comparison study, blend electrospun nanofibers (Cipro/PAA/Dex) was also prepared. The entrapment of drug into the polymeric material and the interaction between polymer blends were confirmed by FT-IR. Moreover, DSC was used to identify the type of interaction between polymeric chains. Field emission scanning electron microscope (FE-SEM) was used to study the nanofiber morphology and transmission electron microscope (TEM) and confocal laser scanning microscope (CLSM) were used to confirm the formation of core-shell structure. In vitro drug release profile was monitored by UV-Vis spectrophotometer and the results showed that Cipro@PAA/Dex exhibited controlled release behavior whereas Cipro/PAA/Dex showed burst release behavior. Moreover, the release mechanism is kinetically followed diffusion.

Solution Blowing Spinning Technology towards Green Development of Urea Sensor Nanofibers Immobilized with Hydrazone Probe

Cellulose has been one of the most widespread materials due to its renewability, excellent mechanical properties, biodegradability, high absorption ability, biocompatibility and cheapness. Novel, simple and green colorimetric fibrous film sensor was developed by immobilization of urease enzyme (U) and tricyanofuran hydrazone (TCFH) molecular probe onto cellulose nanofibers (CNF). Cellulose acetate nanofibers (CANF) were firstly prepared from cellulose acetate using the simple, green and low cost solution blowing spinning technology. The produced CANF was exposed to deacetylation to introduce CNF, which was then treated with a mixture of TCFH and urease enzyme to introduce CNF-TCFH-U nanofibrous biosensor. CNF were reinforced with tricyanofuran hyrazone molecular probe and urease enzyme was encapsulated into calcium alginate biopolymer to establish a biocomposite film. This CNF-TCFH-U naked-eye sensor can be applied as a disposable urea detector. CNF demonstrated a large surface area and was utilized as a carrier for TCFH, which is the spectroscopic probe and urease is a catalyst. The biochromic CNF-TCFH-U nanofibrous biosensor responds to an aqueous medium of urea via a visible color signal changing from off-white to dark pink. The morphology of the generated CNF and CNF-TCFH-U nanofibrous films were characterized by different analytical tools, including energy-dispersive X-ray patterns (EDX), polarizing optical microscope (POM), Fourier-transform infrared spectroscopy (FT-IR) and scanning electron microscope (SEM). SEM images of CNF-TCFH-U nanofibers demonstrated diameters between 800 nm and 2.5 μm forming a nonwoven fabric with a homogeneous distribution of TCFH/urease-containing calcium alginate nanoparticles on the surface of CNF. The morphology of the cross-linked calcium alginate nanoparticles was also explored using transmission electron microscopy (TEM) to indicate an average diameter of 56-66 nm. The photophysical performance of the prepared CNF-TCFH-U was also studied by CIE Lab coloration parameters. The nanofibrous film biosensor displayed a relatively rapid response time (5-10 min) and a limit of detection as low as 200 ppm and as high as 1400 ppm. Tricyanofuran hydrazone is a pH-responsive disperse dye comprising a hydrazone detection group. Determination of urea occurs through a proton transfer from the hydrazone group to the generated ammonia from the reaction of urea with urease.

Controlled Release of Phosphorus from Superabsorbent Phosphate-Bound Alginate-Graft-Polyacrylamide: Resistance to Soil Cations and Release Mechanism

Two controlled-released fertilizers of phosphorylated alginate grafted with polyacrylamide (P-Alg-g-PAM) were synthesized. Monoammonium phosphate (MAP) and diammonium phosphate (DAP) were reacted with a matrix of sodium alginate (Alg) and poly(vinyl alcohol) (PVA). The phosphorylated matrix was then grafted with acrylamide. The obtained fertilizer materials showed excellent water absorbance. The controlled-release behavior of phosphorylated alginate grafted with polyacrylamide (P-Alg-g-PAM) was investigated at normal pH and 25 °C. The fertilizer materials exhibited release of phosphorus up to 77% for the MAP sample and up to 57% for the DAP sample till the forty fifth day of the application at pH 7 and 25 °C. More importantly, when the release experiments were conducted in calcium chloride medium, the fertilizers were able to release phosphorus efficiently with slight decrease until the forty fifth day of the application, suggesting that the presence of Alg in the fertilizer formulation may help in extending the duration for which phosphorus is available to the plant.

Biocidal Polymers: Synthesis, Characterization and Antimicrobial Activity of Bis-Quaternary Onium Salts of Poly(aspartate-co-succinimide)

Microbial multidrug resistance presents a real problem to human health. Therefore, water-soluble polymers based on poly(aspartate-co-succinimide) were synthesized via reaction of poly(aspartate-co-succinimide) with bis-quaternary ammonium or quaternary salts. The resultant copolymers were characterized by various techniques such as FTIR, TGA, ¹HNMR, ¹³CNMR and elemental microanalysis. Antimicrobial activities of the new onium salts were investigated against Escherichia coli, Pseudomonas aeruginosa, Staphylococcus aureus, and Salmonella typhi, and the fungi; Candida albicans,Aspergillus niger, Cryptococcus neoformans and Aspergillus flavus by agar diffusion method. Antimicrobial activity was studied in terms of inhibition zone diameters, in addition to the estimation of minimal inhibitory concentration (MIC) of the prepared compounds. A. niger and E. coli were the most affected microorganisms among the tested microorganisms with an inhibition zone of 19-21 (mm) in case of biocides, (V) and (VII). The obtained results showed that the quaternary onium salts have higher activity compared to the aspartate copolymer with MIC concentrations of 25 mg/mL for (VII) and (V) and 50 mg/mL for (VI) and (IV).

Polyaspartate-Ionene/Na+-Montmorillonite Nanocomposites as Novel Adsorbent for Anionic Dye; Effect of Ionene Structure

Surface modification of sodium montmorillonite (Na+-Mt) was performed using antimicrobial agents to produce an ecofriendly nanocomposite. The adsorption performance of the nanocomposite has been evaluated for the removal of Acid Blue 25 dye (AB25) as a model organic pollutant from wastewater. Sodium montmorillonite (Na+-Mt) was modified with three different ionene compounds through ion exchange, and further modified through reaction with polyaspartate to provide three ecofriendly nanocomposites (denoted ICP-1-3). The nanocomposites were characterized using FTIR, PXRD, TEM, SEM, and BET surface area. The adsorption isotherm of AB25 onto ICP-1, ICP-2 and ICP-3 was analyzed using the Langmuir, Freundlich, and Dubinin-Radushkevich (D-R) models. The adsorption isotherm was found to be best fitted by a Freundlich model. The thermodynamic parameters were calculated. The kinetics of the adsorption data were analyzed and the adsorption behavior was found to obey pseudo-second-order kinetics, and the intraparticle diffusion model. The adsorption mechanism was studied by FTIR.

Impact of Chain Length on Release Behavior of Modified Polyethylene Glycol Intercalated-Montmorillonite Nanocomposite

A new drug delivery nanocomposite system was prepared from sodium montmorillonite (Na⁺Mt) intercalated with modified polyethylene glycol (PEG). PEGs of different molecular weights (400, 4000, and 8000) were modified with glycidyltrimethylammonium chloride (GTMAC) to provide terminal quaternary ammonium sites capable for attaching with Mt or other materials through ion exchange. The modified PEG-GTMAC derivatives were reacted in excess amount with Na⁺Mt through ion exchange. The remaining quaternary sites were used for the attachment of sodium diclofenac as a model drug. The structures of the prepared clay-modified PEG-diclofenac systems were characterized using Fourier transform infrared spectroscopy (FTIR), powder X-ray diffraction (PXRD), transmission electron microscopy (TEM), and scanning electron microscopy (SEM). The release behavior of diclofenac from the different nanocomposites was studied at different pH values. With regard to the PEG chain length, the drug release increased with increasing PEG molecular weight (GCDIII > GCD-III > GCDII > GCDI). The kinetics of the release models was discussed using Korsmeyer-Peppas, Higuchi, and zero- and first-order models. The results of the kinetics study revealed that modified samples with PEG 400 and PEG 4000 (GCD-I and GCDII) exhibited non-Fickian diffusion (anomalous transport) while modified samples with PEG 8000 (GCDIII) exhibited super case-II transport.

Fabrication of functionalized electrospun carbon nanofibers for enhancing lead-ion adsorption from aqueous solutions

Electrospinning technique is a simple and cheap method for fabrication of electrospun nanofibers (ENFs), which in turn can converted into electrospun carbon nanofibers (ECNFs) by carbonization process. The controlling of the ECNFs properties (e.g. surface area, porosity, diameters) during fabrication, make it superior over the other carbon nanomaterials. The aim of our study is to modify the surface of ECNFs to increase its hydrophilicity and in turn its efficiency in removing lead ions (Pb2+) from aqueous systems. The surface modification was carried out in two steps starting from oxidation of pristine ECNFs to produce oxidized ECNFs (o-ECNFs), followed by covalently bonded of melamine, and poly(m-phenylene diamine) for forming melamine-functionalized ECNFs (melam-ECNFs) and poly(m-phenylene diamine)-functionalized ECNFs (PmPDA-ECNFs), respectively. The as-prepared materials were characterized in routine way. The ability of the as-prepared materials towards adsorption of Pb2+ ions as heavy metal was investigated with the study of some factors such as pH solution, contact time, initial concentration and temperature. The adsorption process was analyzed isothermally, and kinetically. According to the values of the thermodynamic parameters, the adsorption of Pb2+ ions onto the functionalized ECNFs was endothermic and spontaneous, except with melam-ECNFs was exothermic.

Physico-Chemical and Biological Evaluation of PLCL/SF Nanofibers Loaded with Oregano Essential Oil

Essential oils are complex volatile compounds, extracted from specific plant species, with promising therapeutic potentials. However, their volatile nature presents a major hindrance in using them as therapeutic agents. In the current study, we successfully encapsulated oregano essential oil (OEO) into Poly (l-lactic acid-co-e-caprolactone) /Silk Fibroin (PLCL/SF) polymers through electrospinning. The nanofibrous membrane (NF) was fabricated and characterized for various physico-chemical and biological attributions. Homogenous and bead free morphology was confirmed by scanning electron microscopy (SEM). Attenuated total reflection Fourier transform infrared spectroscopy (ATR-FTIR) confirmed the successful loading of OEO and its physical interaction with the blend of PLCL/SF. Moreover, thermogravimetric analysis (TGA) also confirmed the successful loading and thermostability of the OEO. Although a significant change was noted in tensile strength due to the loading of OEO, the mechanical behaviour still falls into the acceptable ranges required for skin tissue engineering. Similarly, fabricated material was evaluated for its biological significance. Liquid chromatography-mass spectrometry (LC-MS) was employed to determine the release behaviour of OEO from electrospun membranes. LC-MS data, noted for 48 h, confirmed the biphasic release of OEO. Furthermore, NF membranes have shown strong antioxidant and anti-tumor activities. This material is promising and can be implanted to avoid the recurrence of the tumor after its surgical removal.

Controlled release of phosphorous fertilizer bound to carboxymethyl starch-g-polyacrylamide and maintaining a hydration level for the plant

A controlled release fertilizer system based on phosphate bound-carboxymethyl starch-graft-polyacrylamide (P-CMS-g-PAM) has been prepared in order to deliver the phosphate fertilizer to the plant at a constant rate thereby. This system aims to increase fertilizer phosphorus use efficiency (FPUE) and maintain a hydration level for the plant at the same time. Two types of starch phosphate monoesters were prepared using mono-ammonium (MAP) and di-ammonium phosphate (DAP). First, starch was converted to carboxymethyl starch and then was phosphorylated with mono-ammonium dihydrogen phosphate and di-ammonium dihydrogen phosphate. After phosphorylation, the samples were grafted with acrylamide in the presence of methylene bisacrylamide as a crosslinking agent. The prepared systems of P-CMS-g-PAM were differently characterized by Fourier transformer infrared (FT-IR), thermogravimetric analysis (TGA), scanning electron microscope (SEM) and phosphorous analysis. The swelling behavior was investigated. The kinetics of grafting reaction were also studied. The release behavior of phosphate bound was studied at pH 7 and 25 °C. The mechanism of the phosphate release from P-CMS-g-PAM was examined using the Korsmeyer-Peppas model.

Development of Dual Neurotrophins-Encapsulated Electrosupun Nanofibrous Scaffolds for Peripheral Nerve Regeneration

Nerve growth factor (NGF) is widely used for repairing peripheral nerve injury because of its capability in dominating the survival, migration, proliferation, and differentiation of nerve cells. Monosialoganglioside (GM1), as another kind of nerve growth factor, works for regulating NGF function. In this study, GM1 and NGF were incorporated into the Poly(l-lactic acid-co-ε-caprolactone)/silk fibroin (PLCL/SF) nanofibers by the coaxial electrospinning. The fibers morphology and core–shell structure were characterized by SEM and TEM. The scaffolds demonstrated high tensile stress with good flexibility. In vitro cell viability studies indicated that the scaffolds incorporating both GM1 and NGF played a synergistic effect to enhance Schwann cells (SCs) proliferation and Pheochromocytoma (PC12) cells differentiation, in comparison to the scaffolds only incorporating NGF. Subsequently, the nanofibrous conduit scaffolds (NCSs) were evaluated in vivo in a rabbit sciatic nerve defect model. The NGF/GM1 incorporated NCSs group performed better nerve function recovery than single incorporated group, in consideration of the compound muscle action potential (CMAP) and nerve conduction velocity (NCV) results. Furthermore, hematoxylin and eosin (H&E) staining, toluidine blue (TB) staining, and transmission electron microscope (TEM) analysis displayed better nerve regeneration of NGF/GM1 incorporated NCSs both quantitatively and qualitatively. Therefore, the results indicated the dual neurotrophins-incorporated NCSs had potentials for the application in peripheral nerve repairing.

Green Electrospining of Hydroxypropyl Cellulose Nanofibres for Drug Delivery Applications

Electrospun nanofibers mats are green synthesized using hydroxypropyl cellulose (HPC) individually or in conjugation with either poly(vinyl alcohol) (PVA) or Polyvinylpyrrolidone (PVP) to enhance the mechanical properties of the nanofibers mats. Desirable attributes of the as-obtained nanofibers mats are manifested via using SEM, FT-IR, TGA and conventional tools for mechanical and physical properties. The obtained data from SEM images demonstrated that the diclofenac sodium (DS) loaded nanofibers mats did not provide significant change of the morphological structure to the mats. In addition the thermal stability and the visual and mechanical properties of PVA or PVP was dramatically enhanced with the addition of HPC. The in vitro sustained release of DS drug was controlled when loaded into electrospun nanofibers of HPC with either PVA or PVP.

Fabrication and preliminary study of a biomimetic tri-layer tubular graft based on fibers and fiber yarns for vascular tissue engineering

Designing a biomimetic and functional tissue-engineered vascular graft has been urgently needed for repairing and regenerating defected vascular tissues. Utilizing a multi-layered vascular scaffold is commonly considered an effective way, because multi-layered scaffolds can easily simulate the structure and function of natural blood vessels. Herein, we developed a novel tri-layer tubular graft consisted of Poly(L-lactide-co-caprolactone)/collagen (PLCL/COL) fibers and Poly(lactide-co-glycolide)/silk fibroin (PLGA/SF) yarns via a three-step electrospinning method. The tri-layer vascular graft consisted of PLCL/COL aligned fibers in inner layer, PLGA/SF yarns in middle layer, and PLCL/COL random fibers in outer layer. Each layer possessed tensile mechanical strength and elongation, and the entire tubular structure provided tensile and compressive supports. Furthermore, the human umbilical vein endothelial cells (HUVECs) and smooth muscle cells (SMCs) proliferated well on the materials. Fluorescence staining images demonstrated that the axially aligned PLCL/COL fibers prearranged endothelium morphology in lumen and the circumferential oriented PLGA/SF yarns regulated SMCs organization along the single yarns. The outside PLCL/COL random fibers performed as the fixed layer to hold the entire tubular structure. The in vivo results showed that the tri-layer vascular graft supported cell infiltration, scaffold biodegradation and abundant collagen production after subcutaneous implantation for 10weeks, revealing the optimal biocompatibility and tissue regenerative capability of the tri-layer graft. Therefore, the specially designed tri-layer vascular graft will be beneficial to vascular reconstruction.

Development of Nanofiber Sponges-Containing Nerve Guidance Conduit for Peripheral Nerve Regeneration in Vivo

In the study of hollow nerve guidance conduit (NGC), the dispersion of regenerated axons always confused researchers. To address this problem, filler-containing NGC was prepared, which showed better effect in the application of nerve tissue engineering. In this study, nanofiber sponges with abundant macropores, high porosity, and superior compressive strength were fabricated by electrospinning and freeze-drying. Poly(l-lactic acid-co-ε-caprolactone)/silk fibroin (PLCL/SF) nanofiber sponges were used as filler to prepare three-dimensional nanofiber sponges-containing (NS-containing) NGC. In order to study the effect of fillers for nerve regeneration, hollow NGC was set as control. In vitro cell viability studies indicated that the NS-containing NGC could enhance the proliferation of Schwann cells (SCs) due to the macroporous structure. The results of hematoxylin-eosin (HE) and immunofluorescence staining confirmed that SCs infiltrated into the nanofiber sponges. Subsequently, the NS-containing NGC was implanted in a rat sciatic nerve defect model to evaluate the effect in vivo. NS-containing NGC group performed better in nerve function recovery than hollow NGC group. In consideration of the walking track and triceps weight analysis, NS-containing NGC was close to the autograft group. In addition, histological and morphological analyses with HE and toluidine blue (TB) staining, and transmission electron microscope (TEM) were conducted. Better nerve regeneration was observed on NS-containing NGC group both quantitatively and qualitatively. Furthermore, the results of three indexes' immuno-histochemistry and two indexes' immunofluorescence all indicated good nerve regeneration of NS-containing NGC as well, compared with hollow NGC. The results demonstrated NS-containing NGC had great potential in the application of peripheral nerve repair.

Application of a bilayer tubular scaffold based on electrospun poly(l-lactide-co-caprolactone)/collagen fibers and yarns for tracheal tissue engineering

An electrospun bilayer tubular scaffold based on collagen/P(LLA–CL) was prepared and preprocessing with autologous tracheal cells and vascularization was done for the purpose of tracheal tissue engineering.

Laminin-coated nerve guidance conduits based on poly(l-lactide-co-glycolide) fibers and yarns for promoting Schwann cells’ proliferation and migration

A laminin-coated and yarn-encapsulated PLGA nerve guidance conduit for Schwann cells’ proliferation and migration.

Polypyrrole-coated poly(l-lactic acid-co-ε-caprolactone)/silk fibroin nanofibrous membranes promoting neural cell proliferation and differentiation with electrical stimulation

Polypyrrole (Ppy), as a conductive polymer, is commonly used for nerve tissue engineering because of its good conductivity and non-cytotoxicity. To avoid the inconvenience of Ppy processing, it was coated on electrospun poly(l-lactic acid-co-ε-caprolactone)/silk fibroin (PLCL/SF) nanofibers via the in situ oxidative polymerization of pyrrole monomers in this study. Ppy-coated PLCL/SF membranes were characterized by scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and thermogravimetric (TG) analysis. The results confirmed the disposition of Ppy on the PLCL/SF nanofibers, and the nanofibers kept their nanofibrous morphology and thermal stability, in comparison to the untreated ones. The conductivities and water contact angles were evaluated as well, and indicated that the conductivity and hydrophilicity of Ppy-coated nanofibers were increased. Furthermore, this study showed that electrical stimulation (ES) promoted PC12 cell differentiation and axonal extension on Ppy-coated nanofibers. The MTT assay suggested that both Ppy and ES could promote Schwann cell (SC) proliferation. Immunofluorescence staining and real time-qPCR (RT-qPCR) testing demonstrated that ES could induce PC12 cell differentiation even without nerve growth factor (NGF) treatment, and moreover, Ppy coating increased the inducing effects on PC12 cell differentiation. The overall results indicated the promising potential of Ppy-coated PLCL/SF nanofibrous membranes for peripheral nerve repair and regeneration.

Superabsorbent 3D Scaffold Based on Electrospun Nanofibers for Cartilage Tissue Engineering

Electrospun nanofibers have been used for various biomedical applications. However, electrospinning commonly produces two-dimensional (2D) membranes, which limits the application of nanofibers for the 3D tissue engineering scaffold. In the present study, a porous 3D scaffold (3DS-1) based on electrospun gelatin/PLA nanofibers has been prepared for cartilage tissue regeneration. To further improve the repairing effect of cartilage, a modified scaffold (3DS-2) cross-linked with hyaluronic acid (HA) was also successfully fabricated. The nanofibrous structure, water absorption, and compressive mechanical properties of 3D scaffold were studied. Chondrocytes were cultured on 3D scaffold, and their viability and morphology were examined. 3D scaffolds were also subjected to an in vivo cartilage regeneration study on rabbits using an articular cartilage injury model. The results indicated that 3DS-1 and 3DS-2 exhibited superabsorbent property and excellent cytocompatibility. Both these scaffolds present elastic property in the wet state. An in vivo study showed that 3DS-2 could enhance the repair of cartilage. The present 3D nanofibrous scaffold (3DS-2) would be promising for cartilage tissue engineering application.

Heparin and Vascular Endothelial Growth Factor Loaded Poly(L-lactide-co-caprolactone) Nanofiber Covered Stent-Graft for Aneurysm Treatment

Restenosis caused by thrombopoiesis is one of the biggest hinders of endovascular stent-graft used in small-diameter vessels. Rapid endothelialization of the lumen of stent is a promising approach to prevent thrombosis. In this study, we aimed at loading heparin, a potent anticoagulants, and vascular endothelial growth factor (VEGF) into the core of poly(L-lactide-co-caprolactone) nanofiber via emulsion electrospinning. The nanofiber was covered on the stent and applied in the treatment of vascular diseases such as aneurysm. The morphologies of the emulsion electrospun nanofibers and core--shell structure were observed by scanning electron microscope and laser scanning confocal microscope. The release profiles of heparin and VEGF, degradation rate of nanofiber mats and cell proliferation in vitro were investigated. It was found that the release of both heparin and VEGF from the nanofiber lasted for more than 30 days without serious initial burst release. The degradation rate of nanofiber mats containing heparin and VEGF was faster than that of pure PLCL nanofiber mats. Moreover, the released VEGF could promote the proliferation of Pig iliac endothelial cells (PIECs) cultured on the nanofiber mat, which was of great benefit to stent endothelialization. The results of digital subtraction angiography (DSA) follow-up indicated the aneurysm was obliterated by separating the aneurysm dome from the blood circulation and the parent artery kept long-term patency. Results of the study demonstrated that the heparin and VEGF loaded nanofiber could provide an approach to fabricate covered stent-graft with properties of anticoagulation and induction of rapid endothelialization.

An in situ forming tissue adhesive based on poly(ethylene glycol)-dimethacrylate and thiolated chitosan through the Michael reaction

A novel tissue adhesive composed of CSS and PEGDMA based on the Michael addition reaction.

Fabrication of poly(ester-urethane)urea elastomer/gelatin electrospun nanofibrous membranes for potential applications in skin tissue engineering

In this study, PEUU was blended with gelatin for electrospun nanofiber and nanoyarn. PEUU/gelatin with a mass ratio of 75 : 25 showed better comprehensive property than nanofiber thus paving way for the further research in tissue engineering field.

Synthesis and antibacterial of carboxymethyl starch-grafted poly(vinyl imidazole) against some plant pathogens

Poly(N-vinyl imidazole) (PVI) has been grafted onto carboxymethyl starch (CMS) in aqueous solution using potassium persulfate (KPS) as initiator. Reaction parameters that affect grafting efficiency and percentage grafting such as monomer and initiator concentration, the reaction temperature and time were investigated. The grafted products were characterized by FTIR, thermal analysis, SEM photograph and elemental analysis. The antibacterial effects of the carboxymethyl starch-grafted-poly(N-vinylimidazole) (CMS-g-PVI) was examined against two plant pathogens Gram negative bacteria: Xanthomonas perforanss and Xanthomonas oryzae. Generally, upon application of the CMS-g-PVI to the bacterial cells; the mortality rate increased from 45.71 to 59.37% for Xanthomonas perforans and X. oryzae, respectively. While the MIC for most of both bacterial strains were recorded at concentration of 60 μg/mL. The results indicate that CMS-g-PVI has bactericidal properties and can be used for seed treatment to control xanthomonads associated with bacterial leaf spot (BLS).