Formulation of oil in oil emulsions: potential drug reservoirs for slow release

Bioactive Nanogels Mimicking the Antithrombogenic Nitric Oxide-Release Function of the Endothelium

Nitric oxide (NO) plays a significant role in controlling the physiology and pathophysiology of the body, including the endothelial antiplatelet function and therefore, antithrombogenic property of the blood vessels. This property of NO can be exploited to prevent thrombus formation on artificial surfaces like extracorporeal membrane oxygenators, which when come into contact with blood lead to protein adsorption and thereby platelet activation causing thrombus formation. However, NO is extremely reactive and has a very short biological half-life in blood, so only endogenous generation of NO from the blood contacting material can result into a stable and kinetically controllable local delivery of NO. In this regards, highly hydrophilic bioactive nanogels are presented which can endogenously generate NO in blood plasma from endogenous NO-donors thereby maintaining a physiological NO flux. It is shown that NO releasing nanogels could initiate cGMP-dependent protein kinase signaling followed by phosphorylation of vasodilator-stimulated phosphoprotein in platelets. This prevents platelet activation and aggregation even in presence of highly potent platelet activators like thrombin, adenosine 5'-diphosphate, and U46619 (thromboxane A2 mimetic).

Nonaqueous Emulsion Polycondensation Enabled by a Self‐Assembled Cage‐like Surfactant

Nonaqueous emulsions are crucial for a range of applications based on water‐sensitive systems such as controlled polymerizations requiring anhydrous reaction conditions and the stabilization of readily hydrolyzable reagents or pharmacologically active components. However, defined molecular surfactants to stabilize such nonaqueous emulsions are scarce. We introduce a self‐assembled coordination cage, decorated with cholesterol functionalities, to serve as a molecular surfactant for various oil‐in‐oil emulsions of immiscible organic solvents. While the positively charged cage forms the amphiphile's polar moiety, the non‐polar cholesterol appendices can bend in a common direction to stabilize the emulsion. Templated by the droplets, polycondensation reactions were carried out to produce microstructured polyurethane and polyurea materials of different particle sizes and morphologies. Further, the amphiphilic cage can encapsulate a guest molecule and the resulting host‐guest assembly was also examined as a surfactant. In addition, the aggregation behavior of the amphiphilic cage in an aqueous medium was examined.

Overcoming hydrolytic degradation challenges in topical delivery: non-aqueous nano-emulsions

INTRODUCTION

Non-aqueous nano-emulsions (NANEs) are colloidal lipid-based dispersions with nano-sized droplets formed by mixing two immiscible phases, none of which happens to be an aqueous phase. Their ability to incorporate water and oxygen sensitive drugs without any susceptibility to degradation makes them the optimum dosage form for such candidates. In NANEs, polar liquids or polyols replace the aqueous phase while surfactants remain same as used in conventional emulsions. They are a part of the nano-emulsion family albeit with substantial difference in composition and application.

AREAS COVERED

The present review provides a brief insight into the strategies of loading water-sensitive drugs into NANEs. Further advancement in these anhydrous systems with the use of solid particulate surfactants in the form of Pickering emulsions is also discussed.

EXPERT OPINION

NANEs offer a unique platform for delivering water-sensitive drugs by loading them in anhydrous formulation. The biggest advantage of NANEs vis-à-vis the other nano-cargos is that they can also be prepared without using equipment-intensive techniques. However, the use of NANEs in drug delivery is quite limited. Looking at the small number of studies available in this direction, a need for further research in this field is required to explore this delivery system further.

Self-Regulated Smectic Emulsion with Switchable Lasing Application

A structurally reversible smectic liquid crystal (LC) emulsion made of semifluorinated rod-type molecules in silicon oil, which is controlled by simple heating and cooling, is presented. Without adding any kind of additives, such as surfactants, polymers or emulsifiers, and without using any special tools, such as microfluidics or gas bubbling, the LC molecules spontaneously form monodisperse spherical and myelin-like structures upon cooling from the isotropic temperature. The LC emulsion can easily trap guest materials, providing a platform for repeatable and reliable switchable emulsification. For example, this interesting system enables the realization of an on-off lasing system by confining fluorescent dyes in the LC droplets.

Lipid nanocarriers for the loading of polyphenols - A comprehensive review

Polyphenols are secondary metabolites found in all vascular plants and constitute a large group of at least 10,000 unique compounds. Particular attention is currently being paid to polyphenols attributed to their beneficial effects in the protection and prevention of several diseases. While their use in food, pharmaceutical and cosmetic industries is largely documented, several environmental conditions (e.g. light, temperature or oxygen) may affect the physicochemical stability of polyphenols, compromising their bioactivity in vivo. To overcome these limitations, the loading of polyphenols into nanoparticles has been proposed aiming at both increasing their bioavailability and reducing eventual side effects. Lipid nanoparticles offer several advantages, namely their biodegradability and low toxicity, with the additional capacity to modify the release profile of loaded drugs. This paper is a review of the recent advances of lipid nanocarriers commonly used for the encapsulation of polyphenols, highlighting their added value to increase bioavailability and bioactivity of this group of compounds as well as their application in several diseases.

Particles adsorbed at various non-aqueous liquid-liquid interfaces

Particles adsorbed at liquid interfaces are commonly used to stabilise water-oil Pickering emulsions and water-air foams. The fundamental understanding of the physics of particles adsorbed at water-air and water-oil interfaces is improving significantly due to novel techniques that enable the measurement of the contact angle of individual particles at a given interface. The case of non-aqueous interfaces and emulsions is less studied in the literature. Non-aqueous liquid-liquid interfaces in which water is replaced by other polar solvents have properties similar to those of water-oil interfaces. Nanocomposites of non-aqueous immiscible polymer blends containing inorganic particles at the interface are of great interest industrially and consequently more work has been devoted to them. By contrast, the behaviour of particles adsorbed at oil-oil interfaces in which both oils are immiscible and of low dielectric constant (ε<3) is scarcely studied. Hydrophobic particles are required to stabilise these oil-oil emulsions due to their irreversible adsorption, high interfacial activity and elastic shell behaviour.

Oil-in-oil emulsions stabilised solely by solid particles

A brief review of the stabilisation of emulsions of two immiscible oils is given. We then describe the use of fumed silica particles coated with either hydrocarbon or fluorocarbon groups in acting as sole stabilisers of emulsions of various vegetable oils with linear silicone oils (PDMS) of different viscosity. Transitional phase inversion of emulsions, containing equal volumes of the two oils, from silicone-in-vegetable (S/V) to vegetable-in-silicone (V/S) occurs upon increasing the hydrophobicity of the particles. Close to inversion, emulsions are stable to coalescence and gravity-induced separation for at least one year. Increasing the viscosity of the silicone oil enables stable S/V emulsions to be prepared even with relatively hydrophilic particles. Predictions of emulsion type from calculated contact angles of a silica particle at the oil-oil interface are in agreement with experiment provided a small polar contribution to the surface energy of the oils is included. We also show that stable multiple emulsions of V/S/V can be prepared in a two-step procedure using two particle types of different hydrophobicity. At fixed particle concentration, catastrophic phase inversion of emulsions from V/S to S/V can be effected by increasing the volume fraction of vegetable oil. Finally, in the case of sunflower oil + 20 cS PDMS, the study is extended to particles other than silica which differ in chemical type, particle size and particle shape. Consistent with the above findings, we find that only sufficiently hydrophobic particles (clay, zinc oxide, silicone, calcium carbonate) can act as efficient V/S emulsion stabilisers.

Block copolymer stabilized nonaqueous biocompatible sub-micron emulsions for topical applications

Polyethylene glycol (PEG) 400/Miglyol 812 non-aqueous sub-micron emulsions were developed due to the fact that they are of interest for the design of drug-loaded biocompatible topical formulations. These types of emulsions were favourably stabilized by poly (2-vinylpyridine)-b-poly (butadiene) (P2VP-b-PBut) copolymer with DPBut>DP2VP, each of these sequences being well-adapted to the solubility parameters of PEG 400 and Miglyol 812, respectively. This type of block copolymers, which might limit the Ostwald ripening, appeared to be more efficient stabilizers than low molecular weight non-ionic surfactants. The emulsion characteristics, such as particle size, stability and viscosity at different shear rates were determined as a function of the phase ratio, the copolymer concentration and storage time. It was further shown that Acyclovir, as a model drug of low water solubility, could be incorporated into the PEG 400 dispersed phase, with no significant modification of the initial emulsion characteristics.

Novel anhydrous emulsions: Formulation as controlled release vehicles

Novel anhydrous emulsions, which may offer some advantages as depot or reservoir vehicles for lipophilic drugs in controlled delivery systems, were formulated using castor oil as the disperse phase and dimethicone or cyclopentasiloxane as the continuous phase. Among the emulsifiers studied only silicone surfactants (cyclomethicone/dimethicone copolyols) which were miscible in silicone oil stabilized the emulsions. Cyclomethicone/PEG/PPG-18/18 Dimethicone and Cyclopentasiloxane/PEG/PPG-18/18 Dimethicone were more effective in lowering the interfacial tension between castor oil and both dimethicone and cyclopentasiloxane. Emulsions formulated using either of these two surfactants were found to be stable against phase separation and exhibited least globule growth over 168 h. The average particle size was found to be 2-6 microm in these systems formed by probe sonication. Slow release patterns of 3H-dehydroepiandrosterone (DHEA) and 3H-dexamethasone solubilized in the disperse castor oil phase into an aqueous dialyzing medium were observed over 48 h.