Development of an Automated Sample Preparation Module for Environmental Monitoring of Biowarfare Agents

Automation and Computerization of (Bio)sensing Systems

Sensing systems necessitate automation to reduce human effort, increase reproducibility, and enable remote sensing. In this perspective, we highlight different types of sensing systems with elements of automation, which are based on flow injection and sequential injection analysis, microfluidics, robotics, and other prototypes addressing specific real-world problems. Finally, we discuss the role of computer technology in sensing systems. Automated flow injection and sequential injection techniques offer precise and efficient sample handling and dependable outcomes. They enable continuous analysis of numerous samples, boosting throughput, and saving time and resources. They enhance safety by minimizing contact with hazardous chemicals. Microfluidic systems are enhanced by automation to enable precise control of parameters and increase of analysis speed. Robotic sampling and sample preparation platforms excel in precise execution of intricate, repetitive tasks such as sample handling, dilution, and transfer. These platforms enhance efficiency by multitasking, use minimal sample volumes, and they seamlessly integrate with analytical instruments. Other sensor prototypes utilize mechanical devices and computer technology to address real-world issues, offering efficient, accurate, and economical real-time solutions for analyte identification and quantification in remote areas. Computer technology is crucial in modern sensing systems, enabling data acquisition, signal processing, real-time analysis, and data storage. Machine learning and artificial intelligence enhance predictions from the sensor data, supporting the Internet of Things with efficient data management.

Multiplex Immunoassay Techniques for On-Site Detection of Security Sensitive Toxins

Biological toxins are a heterogeneous group of high molecular as well as low molecular weight toxins produced by living organisms. Due to their physical and logistical properties, biological toxins are very attractive to terrorists for use in acts of bioterrorism. Therefore, among the group of biological toxins, several are categorized as security relevant, e.g., botulinum neurotoxins, staphylococcal enterotoxins, abrin, ricin or saxitoxin. Additionally, several security sensitive toxins also play a major role in natural food poisoning outbreaks. For a prompt response to a potential bioterrorist attack using biological toxins, first responders need reliable, easy-to-use and highly sensitive methodologies for on-site detection of the causative agent. Therefore, the aim of this review is to present on-site immunoassay platforms for multiplex detection of biological toxins. Furthermore, we introduce several commercially available detection technologies specialized for mobile or on-site identification of security sensitive toxins.

Bioaerosol Sampling: Classical Approaches, Advances, and Perspectives

Bioaerosol sampling is an essential and integral part of any bioaerosol investigation. Since bioaerosols are very diverse in terms of their sizes, species, biological properties, and requirements for their detection and quantification, bioaerosol sampling is an active, yet challenging research area. This paper was inspired by the discussions during the 2018 International Aerosol Conference (IAC) (St. Louis, MO) regarding the need to summarize the current state of the art in bioaerosol research, including bioaerosol sampling, and the need to develop a more standardized set of guidelines for protocols used in bioaerosol research. The manuscript is a combination of literature review and perspectives: it discusses the main bioaerosol sampling techniques and then overviews the latest technical developments in each area; the overview is followed by the discussion of the emerging trends and developments in the field, including personal sampling, application of passive samplers, and advances toward improving bioaerosol detection limits as well as the emerging challenges such as collection of viruses and collection of unbiased samples for bioaerosol sequencing. The paper also discusses some of the practical aspects of bioaerosol sampling with particular focus on sampling aspects that could lead to bioaerosol determination bias. The manuscript concludes by suggesting several goals for bioaerosol sampling and development community to work towards and describes some of the grand bioaerosol challenges discussed at the IAC 2018.

Quantitative and sensitive RNA based detection of Bacillus spores

The fast and reliable detection of bacterial spores is of great importance and still remains a challenge. Here we describe a direct RNA-based diagnostic method for the specific detection of viable bacterial spores which does not depends on an enzymatic amplification step and therefore is directly appropriate for quantification. The procedure includes the following steps: (i) heat activation of spores, (ii) germination and enrichment cultivation, (iii) cell lysis, and (iv) analysis of 16S rRNA in crude cell lysates using a sandwich hybridization assay. The sensitivity of the method is dependent on the cultivation time and the detection limit; it is possible to detect 10 spores per ml when the RNA analysis is performed after 6 h of enrichment cultivation. At spore concentrations above 10(6) spores per ml the cultivation time can be shortened to 30 min. Total analysis times are in the range of 2-8 h depending on the spore concentration in samples. The developed procedure is optimized at the example of Bacillus subtilis spores but should be applicable to other organisms. The new method can easily be modified for other target RNAs and is suitable for specific detection of spores from known groups of organisms.

Detection of anthrax and other pathogens using a unique liquid array technology

A bead-based liquid hybridization assay, Luminex(®) 100™, was used to identify four pathogenic bacteria, Bacillus anthracis, Clostridium botulinum, Francisella tularensis subsp. tularensis, and Yersinia pestis, and several close relatives. Hybridization between PCR-amplified target sequences and probe sequences (located within the 23S ribosomal RNA gene rrl and the genes related to the toxicity of each bacterium) was detected in single-probe or multiple-probe assays, depending on the organism. The lower limits of detection (LLDs) for the probes ranged from 0.1 to 10 ng. Sensitivity was improved using lambda exonuclease to digest the noncomplementary target strand. All contributors in 33 binary, ternary, and quaternary mixtures in which all components were present in a 1:1 ratio were identified with an 80% success rate. Twenty-eight binary mixtures in which the two components were combined in various ratios were further studied. All target sequences were detected, even when the minor component was overshadowed by a tenfold excess of the major component.

Underwater application of quantitative PCR on an ocean mooring

The Environmental Sample Processor (ESP) is a device that allows for the underwater, autonomous application of DNA and protein probe array technologies as a means to remotely identify and quantify, in situ, marine microorganisms and substances they produce. Here, we added functionality to the ESP through the development and incorporation of a module capable of solid-phase nucleic acid extraction and quantitative PCR (qPCR). Samples collected by the instrument were homogenized in a chaotropic buffer compatible with direct detection of ribosomal RNA (rRNA) and nucleic acid purification. From a single sample, both an rRNA community profile and select gene abundances were ascertained. To illustrate this functionality, we focused on bacterioplankton commonly found along the central coast of California and that are known to vary in accordance with different oceanic conditions. DNA probe arrays targeting rRNA revealed the presence of 16S rRNA indicative of marine crenarchaea, SAR11 and marine cyanobacteria; in parallel, qPCR was used to detect 16S rRNA genes from the former two groups and the large subunit RuBisCo gene (rbcL) from Synecchococcus. The PCR-enabled ESP was deployed on a coastal mooring in Monterey Bay for 28 days during the spring-summer upwelling season. The distributions of the targeted bacterioplankon groups were as expected, with the exception of an increase in abundance of marine crenarchaea in anomalous nitrate-rich, low-salinity waters. The unexpected co-occurrence demonstrated the utility of the ESP in detecting novel events relative to previously described distributions of particular bacterioplankton groups. The ESP can easily be configured to detect and enumerate genes and gene products from a wide range of organisms. This study demonstrated for the first time that gene abundances could be assessed autonomously, underwater in near real-time and referenced against prevailing chemical, physical and bulk biological conditions.

Pathogen detection using a liquid array technology

Low concentrations of microbial pathogens in pure and mixed samples were detected using a bead-based, liquid array technology. A 20-bp sequence in the 23S rRNA gene, rrl, was amplified in four microorganisms: Bacillus cereus, Escherichia coli, Salmonella enterica and Staphylococcus aureus. PCR products were positively identified with the Luminex(®) 100™ system. The system could detect very low amounts of DNA and the instrument response was proportional to the input concentration. The lower limit of detection (LLD) was determined to be 0.5 ng for B. cereus and E. coli and 2 ng for S. enterica. The LLD for S. aureus was not determined as the instrument response was still above the threshold when quantities of DNA as low as 0.25 ng were used. The platform positively identified organisms present in mixed samples even when the minor component was overshadowed by a 10-fold excess of the major component.

A sample-in-answer-out instrument for the detection of multiple respiratory pathogens in unprepared nasopharyngeal swab samples

Multiplex RT-PCR suspension array assays provide a powerful tool for identifying the causative agent(s) of respiratory infections. These assays are time consuming and laborious on a time-per-sample basis if only a few samples require processing. To address this shortcoming and provide an automated solution for fast detection and identification of viral pathogens, we developed the first automated multiplex RT-PCR suspension array instrument capable of handling unprepared clinical samples. The instrument requires less than 3 minutes of hands-on time for a result generated in approximately 2.5 hours. In analytical studies, the instrument performed as well as manually performed assays. The performance of the instrument and loaded multiplex viral detection assay was then tested using unprepared nasopharyngeal samples. The instrument-performed assay detected 61 of 71 RSV positive samples, for a sensitivity of 85.9%. Adenovirus (n = 5) and influenza B (n = 3) were less prevalent in the sample set, but detected to similar levels, 80% and 75%, respectively. The same sample set was also tested using FDA approved immuno-assay rapid tests, and the instrument was found to be more sensitive than the rapid tests with the sole exception being influenza A (n = 16), which was poorly detected due to significant sequence mismatches between the influenza A primer/probe set included in the multiplex mixture and the circulating influenza A strains. Overall, these data demonstrate the developed prototype platform performs multiplex array assays as well as hand-performed assays, and that the instrument's sensitivity and specificity are dictated by the quality of the loaded multiplex assay.

Simultaneous detection of five biothreat agents in powder samples by a multiplexed suspension array

A suspension array-based multiplexed immunoassay was developed for rapid, sensitive, specific, and simultaneous detection of multiple biothreat-associated agents in powder samples. The 5-plexed immunoassays using sets of 9-plexed coupled fluorescent beads were employed to simultaneously detect five representative biothreat agents, including B. anthracis spore, Y. pestis, SARS-CoV, staphylococcal enterotoxin B (SEB) and ricin from a single powder sample and the feasibility for field samples was demonstrated by both blinded and standard laboratory trials. The detection sensitivity and dynamic range for the five biothreat agents from different powders might be varied depending on the nature of the powder and the feature of the contaminating agent. The limit of detection for Y. pestis, B. anthracis spores, SEB, ricin, SARS-CoV N protein in milk powder was 20 cfu, 111 cfu, 110pg, 5.4 ng and 2 ng per test respectively. Compared to conventional ELISA method, the suspension array has a higher sensitive ability, and can detect five biothreat agents simultaneously with high reproducibility.

Rapid multiplexed flow cytometric assay for botulinum neurotoxin detection using an automated fluidic microbead-trapping flow cell for enhanced sensitivity

A bead-based sandwich immunoassay for botulinum neurotoxin serotype A (BoNT/A) has been developed and demonstrated using a recombinant 50 kDa fragment (BoNT/A-HC-fragment) of the BoNT/A heavy chain (BoNT/A-HC) as a structurally valid simulant. Three different anti-BoNT/A antibodies were attached to three different fluorescent dye encoded flow cytometry beads for multiplexing. The assay was conducted in two formats: a manual microcentrifuge tube format and an automated fluidic system format. Flow cytometry detection was used for both formats. The fluidic system used a novel microbead-trapping flow cell to capture antibody-coupled beads with subsequent sequential perfusion of sample, wash, dye-labeled reporter antibody, and final wash solutions. After the reaction period, the beads were collected for analysis by flow cytometry. Sandwich assays performed on the fluidic system gave median fluorescence intensity signals on the flow cytometer that were 2-4 times higher than assays performed manually in the same amount of time. Limits of detection were estimated at 1 pM (approximately 50 pg/mL for BoNT/A-HC-fragment) for the 15 min fluidic assay in buffer.

Lateral flow (immuno)assay: its strengths, weaknesses, opportunities and threats. A literature survey

Lateral flow (immuno)assays are currently used for qualitative, semiquantitative and to some extent quantitative monitoring in resource-poor or non-laboratory environments. Applications include tests on pathogens, drugs, hormones and metabolites in biomedical, phytosanitary, veterinary, feed/food and environmental settings. We describe principles of current formats, applications, limitations and perspectives for quantitative monitoring. We illustrate the potentials and limitations of analysis with lateral flow (immuno)assays using a literature survey and a SWOT analysis (acronym for "strengths, weaknesses, opportunities, threats"). Articles referred to in this survey were searched for on MEDLINE, Scopus and in references of reviewed papers. Search terms included "immunochromatography", "sol particle immunoassay", "lateral flow immunoassay" and "dipstick assay".

An integrated portable hand-held analyser for real-time isothermal nucleic acid amplification

A compact hand-held heated fluorometric instrument for performing real-time isothermal nucleic acid amplification and detection is described. The optoelectronic instrument combines a Printed Circuit Board/Micro Electro Mechanical Systems (PCB/MEMS) reaction detection/chamber containing an integrated resistive heater with attached miniature LED light source and photo-detector and a disposable glass waveguide capillary to enable a mini-fluorometer. The fluorometer is fabricated and assembled in planar geometry, rolled into a tubular format and packaged with custom control electronics to form the hand-held reactor. Positive or negative results for each reaction are displayed to the user using an LED interface. Reaction data is stored in FLASH memory for retrieval via an in-built USB connection. Operating on one disposable 3 V lithium battery >12, 60 min reactions can be performed. Maximum dimensions of the system are 150 mm (h) x 48 mm (d) x 40 mm (w), the total instrument weight (with battery) is 140 g. The system produces comparable results to laboratory instrumentation when performing a real-time nucleic acid sequence-based amplification (NASBA) reaction, and also displayed comparable precision, accuracy and resolution to laboratory-based real-time nucleic acid amplification instrumentation. A good linear response (R2 = 0.948) to fluorescein gradients ranging from 0.5 to 10 microM was also obtained from the instrument indicating that it may be utilized for other fluorometric assays. This instrument enables an inexpensive, compact approach to in-field genetic screening, providing results comparable to laboratory equipment with rapid user feedback as to the status of the reaction.

Autonomous Microfluidic Sample Preparation System for Protein Profile-Based Detection of Aerosolized Bacterial Cells and Spores

For domestic and military security, an autonomous system capable of continuously monitoring for airborne biothreat agents is necessary. At present, no system meets the requirements for size, speed, sensitivity, and selectivity to warn against and lead to the prevention of infection in field settings. We present a fully automated system for the detection of aerosolized bacterial biothreat agents such as Bacillus subtilis (surrogate for Bacillus anthracis) based on protein profiling by chip gel electrophoresis coupled with a microfluidic sample preparation system. Protein profiling has previously been demonstrated to differentiate between bacterial organisms. With the goal of reducing response time, multiple microfluidic component modules, including aerosol collection via a commercially available collector, concentration, thermochemical lysis, size exclusion chromatography, fluorescent labeling, and chip gel electrophoresis were integrated together to create an autonomous collection/sample preparation/analysis system. The cycle time for sample preparation was approximately 5 min, while total cycle time, including chip gel electrophoresis, was approximately 10 min. Sensitivity of the coupled system for the detection of B. subtilis spores was 16 agent-containing particles per liter of air, based on samples that were prepared to simulate those collected by wetted cyclone aerosol collector of approximately 80% efficiency operating for 7 min.

Heightened sense for sensing: recent advances in pathogen immunoassay sensing platforms

Rapid and efficient sensors are essential for effective defense against the emerging threat of bioterrorism and biological warfare. This review article describes several recent immunosensing advances that are relevant to biothreat detection. These highly diverse examples are intended to demonstrate the breadth of these immunochemical sensing systems and platforms while highlighting those technologies that are suitable for pathogen detection.

Lab-on-Valve System Integrating a Chemiluminescent Entity and In Situ Generation of Nascent Bromine as Oxidant for Chemiluminescent Determination of Tetracycline

A novel configuration of a lab-on-valve (LOV) system was fabricated and applied for chemiluminescence (CL) detection by integrating a demountable Z-type flow cell onto the LOV unit. A bismuthate immobilized microcolumn was incorporated in one port of the LOV for in situ oxidation of KBr and generation of bromine as oxidant for the bromine-hydrogen peroxide-tetracycline (TC) chemiluminescent reaction. The nascent bromine reacts with hydrogen peroxide and produces a weak CL signal, the intensity of which was significantly enhanced in the presence of TC following an energy-transfer mechanism. A novel procedure for tetracycline quantification was therefore developed based on the present system. When compared with the reported flow injection-CL methods for TC, this procedure not only provided an improved detection limit of 2.0 microg L(-)(1) but also minimized sample and reagent consumption. A linear range of 6.0-10 000 microg L(-)(1) was derived along with RSD values of 5.9 (at the concentration level of quantification limit) and 2.2% (at 50 microg L(-)(1)), and a sampling frequency of 120 h(-)(1) was achieved. The system was validated with a National Standard Procedure (GB/T 18932.4-2002, HPLC with UV detection) by measuring TC contents in commercial milk samples.

Bacillus anthracis: toxicology, epidemiology and current rapid-detection methods

B. anthracis, the causative agent for anthrax, has been well studied for over 150 years. Due to the genetic similarities among various Bacillus species, as well as its existence in both a spore form and a vegetative state, the detection and specific identification of B. anthracis have been proven to require complex techniques and/or laborious methods. With the heightened interest in the organism as a potential biological threat agent, a large number of interesting detection technologies have recently been developed, including methods involving immunological and nucleic acid-based assay formats. The technologies range from culture-based methods to portable Total Analysis Systems based on real-time PCR. This review with 170 references provides a brief background on the toxicology and epidemiology of B. anthracis, discusses challenges associated with its detection related to genetic similarities to other species, and reviews immunological and, with greater emphasis, nucleic acid-based detection systems.

Current and developing technologies for monitoring agents of bioterrorism and biowarfare

Recent events have made public health officials acutely aware of the importance of rapidly and accurately detecting acts of bioterrorism. Because bioterrorism is difficult to predict or prevent, reliable platforms to rapidly detect and identify biothreat agents are important to minimize the spread of these agents and to protect the public health. These platforms must not only be sensitive and specific, but must also be able to accurately detect a variety of pathogens, including modified or previously uncharacterized agents, directly from complex sample matrices. Various commercial tests utilizing biochemical, immunological, nucleic acid, and bioluminescence procedures are currently available to identify biological threat agents. Newer tests have also been developed to identify such agents using aptamers, biochips, evanescent wave biosensors, cantilevers, living cells, and other innovative technologies. This review describes these current and developing technologies and considers challenges to rapid, accurate detection of biothreat agents. Although there is no ideal platform, many of these technologies have proved invaluable for the detection and identification of biothreat agents.

APDS: the autonomous pathogen detection system

We have developed and tested a fully autonomous pathogen detection system (APDS) capable of continuously monitoring the environment for airborne biological threat agents. The system was developed to provide early warning to civilians in the event of a bioterrorism incident and can be used at high profile events for short-term, intensive monitoring or in major public buildings or transportation nodes for long-term monitoring. The APDS is completely automated, offering continuous aerosol sampling, in-line sample preparation fluidics, multiplexed detection and identification immunoassays, and nucleic acid-based polymerase chain reaction (PCR) amplification and detection. Highly multiplexed antibody-based and duplex nucleic acid-based assays are combined to reduce false positives to a very low level, lower reagent costs, and significantly expand the detection capabilities of this biosensor. This article provides an overview of the current design and operation of the APDS. Certain sub-components of the ADPS are described in detail, including the aerosol collector, the automated sample preparation module that performs multiplexed immunoassays with confirmatory PCR, and the data monitoring and communications system. Data obtained from an APDS that operated continuously for 7 days in a major U.S. transportation hub is reported.

Multiplex diagnostic platforms for detection of biothreat agents

The availability of rapid, sensitive and cost-effective diagnostic methods is paramount to the success of a comprehensive national health security system in the USA. The national networks that were established to safeguard US infrastructures (e.g., public health, livestock, agriculture and water supply) have developed sufficient capability and capacity for monitoring. However, additional advanced methods will be required to maintain operational readiness. Currently available methods, although sensitive and specific, are generally costly and not amenable to high-throughput analyses. Critical to the success of biothreat surveillance is the ability to screen for and detect multiple agents rapidly in a single reaction and with minimal sample processing. This review will examine currently available diagnostic platforms (i.e., PCR-, immuno- and array-based) and biosensors that can detect multiple biothreat analytes in a single reaction (i.e., multiplex assays). The maturity, benefits and limitations of each platform will be described and a prospective view, from current to future state of the art, will be proposed.

Autonomous Detection of Aerosolized Biological Agents by Multiplexed Immunoassay with Polymerase Chain Reaction Confirmation

The autonomous pathogen detection system (APDS) is an automated, podium-sized instrument that continuously monitors the air for biological threat agents (bacteria, viruses, and toxins). The system has been developed to warn of a biological attack in critical or high-traffic facilities and at special events. The APDS performs continuous aerosol collection, sample preparation, and detection using multiplexed immunoassay followed by confirmatory PCR using real-time TaqMan assays. We have integrated completely reusable flow-through devices that perform DNA extraction and PCR amplification. The fully integrated system was challenged with aerosolized Bacillus anthracis, Yersinia pestis, Bacillus globigii, and botulinum toxoid. By coupling highly selective antibody- and DNA-based assays, the probability of an APDS reporting a false positive is extremely low.