Quantum Dot (QD)-Modified Carbon Tape Electrodes for Reproducible Electrochemiluminescence (ECL) Emission on a Paper-Based Platform

Electrochemiluminescence enhanced by isolating ACQphores in imine-linked covalent organic framework for organophosphorus pesticide assay

Most of covalent organic frameworks (COFs) are non or weakly emissive due to either the molecular thermal motion-mediated energy dissipation or the aggregation-caused quenching (ACQ) effect. Herein, we synthesize an imine-linked COF (TFPPy-TPh-COF) with high electrochemiluminescence (ECL) emission and the capability of eliminating the ACQ effect and further construct an ECL sensor for malathion detection. The imine-linked COF is obtained by the condensation reaction of (1,1':3',1″-terphenyl)-4,4″-diamine (TPh) and 1,3,6,8-tetrakis(p-formylphenyl)pyrene (TFPPy), and it has higher ECL efficiency than TFPPy aggregates due to the separation of ACQ luminophores (i.e., TFPPy) from each other by TPh and the restriction of intramolecular motions of TFPPy and TPh to reduce the nonradiative decay. The efficient quenching of ECL is achieved by electrochemiluminescence resonance energy transfer (ERET) from the excited state of the TFPPy-TPh-COF to zeolite imidazolate framework-8 (ZIF-8) and the steric hindrance of ZIF-8. Acetylcholinesterase (AChE) can enzymatically hydrolyze acetylcholine (ACh) to generate acetic acid. The resultant acetic acid can trigger the dissolution of ZIF-8 to produce an enhanced ECL signal. Malathion as an organophosphorus pesticide serves as an AChE inhibitor to prevent the production of acetic acid, inducing the decrease of ECL signal. This sensor displays a limit of detection (LOD) of 2.44 pg/mL and a wide dynamic detection range of 0.01-1000 ng/mL. Furthermore, it can be used to detect other organophosphates pesticides (e.g., methidathion, chlorpyrifos, and paraoxon) and measure malathion in real samples (i.e., pakchoi, lettuce, and apples).

Controlled Growth of MoS2 on Dendritic Ferric Oxide to Enhance Electrochemiluminescence of Nitrogen-Doped Carbon Quantum Dots for Sensitive Immunoassay

The essential expansion of electrochemiluminescence (ECL) technology into clinical detection relies on sensitive and stable signal and maintenance of the activity of the immune molecules during the analysis. This poses a critical challenge for an ECL biosensor as a luminophore in general requires high potential excitation resulting in a strong ECL signal; nevertheless, it has an irreversible effect on the activity of the antigen or antibody. Herein, a novel electrochemiluminescence (ECL) biosensor utilizing nitrogen-doped carbon quantum dots (N-CQDs) as emitters and molybdenum sulfide/ferric oxide (MoS₂@Fe₂O₃) nanocomposites as a coreaction accelerator was developed for detection of neuron-specific enolase (NSE), a biomarker of small cell lung cancer. The doping of nitrogen allows the CQDs to exhibit ECL signals with low excitation potential, with a more viable activity possible for immune molecules. MoS₂@Fe₂O₃ nanocomposites exhibit superior coreaction acceleration characteristics in hydrogen peroxide than any single component of them, and the highly branched dendrite microstructure provides a large number of binding sites for immune molecular, which is an inevitable factor for trace detection. In addition, ion beam sputtering gold particle technology is introduced into the sensor fabrication via an Au-N bond, which will provide sufficient density orientation for capturing the antibody load via the Au-N bonds. With excellent repeatability, stability, and specificity, the as-purposed sensing platform showed differentiated ECL responses of NSE range from 10.00 fg/mL to 500 ng/mL, and the limit of detection (LOD) was calculated of 6.30 fg/mL (S/N = 3). The proposed biosensor is prospective to provide a new avenue for the analysis of NSE or other biomarkers.

The air-gap PAD: a roll-to-roll-compatible fabrication method for paper microfluidics

Paper-based analytical devices (PADs) offer a low-cost, user-friendly platform for rapid point-of-use testing. Without scalable fabrication methods, however, few PADs make it out of the academic laboratory and into the hands of end users. Previously, wax printing was considered an ideal PAD fabrication method, but given that wax printers are no longer commercially available, alternatives are needed. Here, we present one such alternative: the air-gap PAD. Air-gap PADs consist of hydrophilic paper test zones, separated by "air gaps" and affixed to a hydrophobic backing with double-sided adhesive. The primary appeal of this design is its compatibility with roll-to-roll equipment for large-scale manufacturing. In this study, we examine design considerations for air-gap PADs, compare the performance of wax-printed and air-gap PADs, and report on a pilot-scale roll-to-roll production run of air-gap PADs in partnership with a commercial test-strip manufacturer. Air-gap devices performed comparably to their wax-printed counterparts in Washburn flow experiments, a paper-based titration, and a 12-lane pharmaceutical screening device. Using roll-to-roll manufacturing, we produced 2700 feet of air-gap PADs for as little as $0.03 per PAD.

Electrochemical paper-based microfluidic device for on-line isolation of proteins and direct detection of lead in urine

In this work, we developed a microfluidic paper-based analytical device (μPAD) for the on-line isolation of proteins and the electrochemical detection of lead ions (Pb(II)) in urine samples. The patterned filter paper was prepared through the direct printing of microchannel patterns on filter paper using an office laser printer. The paper was modified with protein precipitant and was then coupled with a detachable three-electrode system. Experimental parameters, namely, modification reagents, microchannel length and width, deposition potential, and deposition time, were optimized. Then, the maximum protein concentration under which the device can function was obtained as 300 mg L^-1. The linear range was 10-500 μg L^-1 with a detection limit of 9 μg L^-1. The effectiveness of this device was demonstrated through the quantification of Pb(II) in urine samples and the results agreed with those of atomic absorption spectrometry (AAS).

Paper-Based Microfluidic Sensors for Onsite Environmental Detection: A Critical Review

A newly developed research topic, fabricated paper-based microfluidic sensors, was discussed in the field of low-cost environmental detection. Distinguished with the traditional dipstick or lateral-flow setups, these paper-based microfluidic sensors can serve as a tool for onsite quantitative and semi-quantitative measurements, without risks to cause environmental pollution. They have attracted increasing interest since the first easy-fabricated paper-based setup reported by Whitesides group in 2007. Most of the publications utilized paper-based sensors in clinical detection. In recent years, some groups started to use these sensors in environmental measurement, leading to precise, easy operation, low-cost, and eco-friendly methods for onsite detection. In this review, paper-based microfluidic sensors were briefly introduced, followed by literatures review and discussion for future perspectives.

Recent Advances in Electrochemical and Optical Sensing of Dopamine

Nowadays, several neurological disorders and neurocrine tumours are associated with dopamine (DA) concentrations in various biological fluids. Highly accurate and ultrasensitive detection of DA levels in different biological samples in real-time can change and improve the quality of a patient's life in addition to reducing the treatment cost. Therefore, the design and development of diagnostic tool for in vivo and in vitro monitoring of DA is of considerable clinical and pharmacological importance. In recent decades, a large number of techniques have been established for DA detection, including chromatography coupled to mass spectrometry, spectroscopic approaches, and electrochemical (EC) methods. These methods are effective, but most of them still have some drawbacks such as consuming time, effort, and money. Added to that, sometimes they need complex procedures to obtain good sensitivity and suffer from low selectivity due to interference from other biological species such as uric acid (UA) and ascorbic acid (AA). Advanced materials can offer remarkable opportunities to overcome drawbacks in conventional DA sensors. This review aims to explain challenges related to DA detection using different techniques, and to summarize and highlight recent advancements in materials used and approaches applied for several sensor surface modification for the monitoring of DA. Also, it focuses on the analytical features of the EC and optical-based sensing techniques available.

A specific electrochemiluminescence sensor for selective and ultra-sensitive mercury(ii) detection based on dithiothreitol functionalized copper nanocluster/carbon nitride nanocomposites

A novel electrochemiluminescence sensor based on the combination of copper nanoclusters and carbon nitride nanosheets was fabricated for detecting Hg²⁺.

Paper-based biodetection using luminescent nanoparticles

Point-of-care and in-field technologies for rapid, sensitive and selective detection of molecular biomarkers have attracted much interest. Rugged bioassay technology capable of fast detection of markers for pathogens and genetic diseases would in particular impact the quality of health care in the developing world, but would also make possible more extensive screening in developed countries to tackle problems such as those associated with water and food quality, and tracking of infectious organisms in hospitals and clinics. Literature trends indicate an increasing interest in the use of nanomaterials, and in particular luminescent nanoparticles, for assay development. These materials may offer attributes for development of assays and sensors that could achieve improvements in analytical figures of merit, and provide practical advantages in sensitivity and stability. There is opportunity for cost-efficiency and technical simplicity by implementation of luminescent nanomaterials as the basis for transduction technology, when combined with the use of paper substrates, and the ubiquitous availability of cell phone cameras and associated infrastructure for optical detection and transmission of results. Luminescent nanoparticles have been described for a broad range of bioanalytical targets including small molecules, oligonucleotides, peptides, proteins, saccharides and whole cells (e.g., cancer diagnostics). The luminescent nanomaterials that are described herein for paper-based bioassays include metal nanoparticles, quantum dots and lanthanide-doped nanocrystals. These nanomaterials often have broad and strong absorption and narrow emission bands that improve opportunity for multiplexed analysis, and can be designed to provide emission at wavelengths that are efficiently processed by conventional digital cameras. Luminescent nanoparticles can be embedded in paper substrates that are designed to direct fluid flow, and the resulting combination of technologies can offer competitive analytical performance at relatively low cost.

Cathodic electrochemiluminescence behaviour of MoS2 quantum dots and its biosensing of microRNA-21

The cathodic electrochemiluminescence (ECL) behaviour of nontoxic MoS2 quantum dots (QDs) was studied for the first time using potassium peroxydisulfate as the co-reactant. Ag-PAMAM NCs, serving as difunctional tags for quenching and enhancing ECL of MoS2-reduced graphene oxide composites, were introduced into the ECL detection system for signal amplification. By modulating the interparticle distance between MoS2 QDs and Ag-PAMAM NCs, the ECL quenching from resonance energy transfer and the ECL enhancement from surface plasma resonance were realized. Coupling the good ECL performance of MoS2 QDs with the excellent ECL quenching and enhancement effects of Ag-PAMAM NCs, a novel MoS2 QDs-based ECL biosensing platform for sensitive detection of microRNA-21 was achieved with a detection limit of 0.20 fmol L-1 (S/N = 3). This method was successfully applied to the determination of microRNA-21 in human serum samples with recoveries of 90.0-110.0%, suggesting great potential for its applications in biological and chemical analysis.

Paper based diagnostics for personalized health care: Emerging technologies and commercial aspects

Personalized health care (PHC) is being appreciated globally to combat clinical complexities underlying various metabolic or infectious disorders including diabetes, cardiovascular, communicable diseases etc. Effective diagnoses majorly depend on initial identification of the causes which are nowadays being practiced in disease-oriented approach, where personal health profile is often overlooked. The adoption of PHC has shown significantly improved diagnoses in various conditions including emergency, ambulatory, and remote area. PHC includes personalized health monitoring (PHM), which is its integral part and may provide valuable information's on various clinical conditions. In PHC, bio-fluids are analyzed using various diagnostic devices including lab based equipment and biosensors. Among all types of biosensing systems, paper based biosensors are commercially attracted due to its portability, easy availability, cheaper manufacturing cost, and transportability. Not only these, various intrinsic properties of paper has facilitated the development of paper based miniaturized sensors, which has recently gained ASSURED (Affordable, Sensitive, Specific, User-friendly, Rapid and Robust, Equipment free, Deliverable to all end-users) status for point of care diagnosis in miniaturized settings. In this review, importance of paper based biosensors and their compatibility for affordable and low cost diagnostics has been elaborated with various examples. Limitations and strategies to overcome the challenges of paper biosensor have also been discussed. We have provided elaborated tables which describe the types, model specifications, sensing mechanisms, target biomarkers, and analytical performance of the paper biosensors with their respective applications in real sample matrices. Different commercial aspects of paper biosensor have also been explained using SWOT (Strength, Weakness, Opportunities, Threats) analysis.

A low-cost, ultraflexible cloth-based microfluidic device for wireless electrochemiluminescence application

The rising need for low-cost diagnostic devices has led to the search for inexpensive matrices that allow performing alternative analytical assays. Cloth is a viable material for the development of analytical devices due to its low material and manufacture costs, ability to wick assay fluids by capillary forces, and potential for patterning multiplexed channel geometries. In this paper, we describe the construction of low-cost, ultraflexible microfluidic cloth-based analytical devices (μCADs) for wireless electrochemiluminescence based on closed bipolar electrodes (C-WL-ECL), employing extremely cheap materials and a manufacturing process. The C-WL-ECL μCADs are built with wax-screen-printed cloth channels and carbon ink screen-printed electrodes, and the estimated cost per device is only $0.015. To demonstrate the performance of C-WL-ECL μCADs, the two most commonly used ECL systems - tris(2,2'-bipyridyl)ruthenium(ii)/tri-n-propylamine (Ru(bpy)3(2+)/TPA) and 3-aminophthalhydrazide/hydrogen peroxide (luminol/H2O2) - are applied. Under optimized conditions, the C-WL-ECL method has successfully fulfilled the quantitative determination of TPA with a detection limit of 0.085 mM. In addition, on the bent μCADs (bending angle (θ) = 180°), the luminol/H2O2-based ECL system can detect H2O2 as low as 0.024 mM. Based on such an ECL system, the bent μCADs are further used for determination of glucose in a phosphate buffer solution (PBS), with the detection limit of 0.195 mM. Finally, the applicability and validity, anti-interference ability, and storage stability of the C-WL-ECL μCADs are investigated. The results indicate that the proposed device has shown potential to extend the use of microfluidic analytical devices, due to its simplicity, low cost, ultraflexibility, and acceptable analytical performance.

Novel developments in mobile sensing based on the integration of microfluidic devices and smartphones

Portable electronic devices and wireless communication systems enable a broad range of applications such as environmental and food safety monitoring, personalized medicine and healthcare management. Particularly, hybrid smartphone and microfluidic devices provide an integrated solution for the new generation of mobile sensing applications. Such mobile sensing based on microfluidic devices (broadly defined) and smartphones (MS(2)) offers a mobile laboratory for performing a wide range of bio-chemical detection and analysis functions such as water and food quality analysis, routine health tests and disease diagnosis. MS(2) offers significant advantages over traditional platforms in terms of test speed and control, low cost, mobility, ease-of-operation and data management. These improvements put MS(2) in a promising position in the fields of interdisciplinary basic and applied research. In particular, MS(2) enables applications to remote in-field testing, homecare, and healthcare in low-resource areas. The marriage of smartphones and microfluidic devices offers a powerful on-chip operating platform to enable various bio-chemical tests, remote sensing, data analysis and management in a mobile fashion. The implications of such integration are beyond telecommunication and microfluidic-related research and technology development. In this review, we will first provide the general background of microfluidic-based sensing, smartphone-based sensing, and their integration. Then, we will focus on several key application areas of MS(2) by systematically reviewing the important literature in each area. We will conclude by discussing our perspectives on the opportunities, issues and future directions of this emerging novel field.

Easily Fabricated Microfluidic Devices Using Permanent Marker Inks for Enzyme Assays

In this communication, we describe microfluidic paper analytical devices (μPADs) easily fabricated from commercially available Sharpie ink permanent markers on chromatography paper to colorimetrically detect glucose using glucose oxidase (GOx). Here, solutions of horseradish peroxidase (HRP), GOx, and potassium iodide (KI)were directly spotted onto the center of the μPAD and flowed into samples of glucose that were separately spotted on the μPAD. Using an XY plotter (Roland DGA Corporation, Irvine, CA USA), several ink marks drawn in the paper act as the hydrophobic barriers, thereby, defining the hydrophilic fluid flow paths of the solutions. Two paper devices are described that act as independent assay zones. The glucose assay is based on the enzymatic oxidation of iodide to iodine whereby a color change from clear to brownish-yellow is associated with the presence of glucose. In these experiments, two designs are highlighted that consist of circular paper test regions fabricated for colorimetric and subsequent quantification detection of glucose. The use of permanent markers for paper patterning is inexpensive and rapid and does not require special laboratory equipment or technical skill.

Anodic electrogenerated chemiluminescence behavior and the choline biosensing application of blue emitting conjugated polymer dots

The anodic electrochemiluminescence (ECL) behavior of poly(9,9-dioctylfluorenyl-2,7-diyl) (PFO) dots was studied and applied in oxidoreductase-based ECL biosensing using Chox as the model enzyme.

Microfluidic-based photocatalytic microreactor for environmental application: a review of fabrication substrates and techniques, and operating parameters

This article gives an overview of photocatalytic microreactors with an application in environmental science, in particular, the degradation of different toxic dyes within microchannels.

Far infrared-assisted encapsulation of filter paper strips in poly(methyl methacrylate) for proteolysis

Filter paper strips were enclosed between two poly(methyl methacrylate) plates to fabricate paper-packed channel microchips under pressure in the presence of far infrared irradiation. After the enclosed paper strip was oxidized by periodate, trypsin was covalently immobilized in them to fabricate microfluidic proteolysis bioreactor. The feasibility and performance of the unique bioreactor were demonstrated by digesting BSA and lysozyme. The results were comparable to those of conventional in-solution proteolysis while the digestion time was significantly reduced to ∼18 s. The suitability of the microfluidic paper-based bioreactors to complex proteins was demonstrated by digesting human serum.

An electrochemiluminescent immunosensor based on CdS–Fe3O4nanocomposite electrodes for the detection of Ochratoxin A

A promising electrochemiluminescent immunosensor based on CdS–Fe₃O₄nanocomposites was developed for the detection of Ochratoxin A.

Point-of-Care Diagnostics

Rapid tests that are low-cost and portable are the first line of defence in healthcare systems. Dipstick and lateral-flow are the two universal assay formats as they are lightweight and compact, and provide qualitative results without external instrumentation. However, existing formats have limitations in the quantification of analyte concentrations. Hence, the demand for sample preparation, improved sensitivity and user-interface has challenged the commercial products. Recently, capabilities, sensors and readout devices were expanded to multiplexable assays platforms, which might transcend the capabilities of existing design format of diagnostic tests. This chapter outlines the evolution of diagnostic devices and current trends in the development of qualitative and quantitative sensing devices for applications in healthcare, veterinary medicine, environmental monitoring and food safety. The chapter also discusses design parameters for diagnostics, their functionalisation to increase the capabilities and the performance, emerging sensing platforms and readout technologies. The factors which limit the emerging rapid diagnostics to become commercial products are also discussed.

Paper-based electrochemiluminescence origami cyto-device for multiple cancer cells detection using porous AuPd alloy as catalytically promoted nanolabels

The detection of cancer cells is important and fundamental for cancer diagnosis and therapy, which has attracted considerable interest recently. Although traditional cyto-sensors have been widely explored due to their high sensitivity and selectivity, it is still a challenge to develop a low-cost, portable, disposable, fast, and easy-to-use cancer cell detection method for applying in the field of cancer diagnosis and therapy. Herein, to address these challenges, we developed a microfluidic paper-based electrochemiluminescence origami cyto-device (μ-PECLOC), in which aptamers modified 3D macroporous Au-paper electrodes were employed as the working electrodes and efficient platforms for the specific cancer cells capture. Owing to the effective disproportionation of hydrogen peroxide and specific recognition of mannose on cell surface, concanavalin-A conjugated porous AuPd alloy nanoparticles were introduced into this μ-PECLOC as the catalytically promoted nanolabels for peroxydisulfate ECL system. Under the optimal conditions, the proposed μ-PECLOC exhibited excellent analytical performance with good stability, reproducibility, and accuracy, towards the cyto-sensing of four types of cancer cells indicating the potential applications to facilitate effective and multiple early cancer diagnosis and clinical treatment.

Equipment-free quantitative measurement for microfluidic paper-based analytical devices fabricated using the principles of movable-type printing

Microfluidic paper-based analytical devices (μPADs) are a growing class of low-cost chemo/biosensing technologies designed for point-of-use applications. In this article, we describe MTWP (movable-type wax printing), a facile method for the fabrication of μPADs. MTWP is inspired by the Chinese movable-type printing and requires only a hot plate and homemade small iron movable components. It is able to pattern various wax microstructures in paper via a simple adjustment of the number, patterning forms or types of the metal movable components. This inexpensive and versatile method may thus hold great potential for producing wax-patterned μPADs by untrained operators at minimized cost in developing countries. In addition, two novel equipment-free assay methods are further developed to render μPAD measurements straightforward and quantitative. They use the flow-through time of a detection reagent in a three-dimensional paper device and the number of colored detection microzones in a 24-zone paper device as the detection motifs. The timing method is based on the selective wettability change of paper from hydrophilic to hydrophobic that is mediated by enzymatic reactions. The counting method is carried out on the basis of oxidation-reduction reactions of a colored substance, namely iodine. Their utility is demonstrated with quantitative detection of hydrogen peroxide as a model analyte. These methods require only a timer or a cell phone with a timing function and the abilities of seeing color and of counting for quantitative μPAD measurement, thus making them simple, cost-efficient, and useful sensor technologies for a great diversity of point-of-need applications especially in resource-poor settings.

Photoelectrochemical lab-on-paper device equipped with a porous Au-paper electrode and fluidic delay-switch for sensitive detection of DNA hybridization

The sequence-specific detection of DNA hybridization has attracted considerable interest in numerous fields. Although traditional DNA biosensors have been widely explored due to their high sensitivity, it is still challenging to develop a low-cost, portable, disposable, fast, and easy-to-use DNA detection method for public use at home or in the field. To address these challenges, herein, we report a novel microfluidic photoelectrochemical (PEC) paper-based analytical platform, integrated with an internal chemiluminescent light source, a novel paper supercapacitor (PS) amplifier, and a terminal digital multi-meter (DMM) detector, for sensitive DNA detection using a graphene-modified porous Au-paper electrode as the working electrode to obtain enhanced PEC responses. The quantification mechanism of this strategy is based on the charging of this PS, which was constructed on a paper-based analytical platform through a simple "drawing and soaking" method, by the generated photocurrent. After a fixed period, the PS was automatically shorted under the control of a novel built-in fluidic delay-switch to output an instantaneously amplified current, which could be sensitively detected by the DMM. At optimal conditions, this paper-based analytical platform can detect DNA at concentrations at femtomolar level. This approach also shows excellent specificity toward single nucleotide mismatches.