Platinized Aligned Carbon Nanotube-Sheathed Carbon Fiber Microelectrodes for In Vivo Amperometric Monitoring of Oxygen

Amperometric bio-sensing of lactate and oxygen concurrently with local field potentials during status epilepticus

Epilepsy is a prevalent neurological disorder with a complex pathogenesis and unpredictable nature, presenting limited treatment options in >30 % of affected individuals. Neurometabolic abnormalities have been observed in epilepsy patients, suggesting a disruption in the coupling between neural activity and energy metabolism in the brain. In this study, we employed amperometric biosensors based on a modified carbon fiber microelectrode platform to directly and continuously measure lactate and oxygen dynamics in the brain extracellular space. These biosensors demonstrated high sensitivity, selectivity, and rapid response time, enabling in vivo measurements with high temporal and spatial resolution. In vivo recordings in the cortex of anaesthetized rats revealed rapid and multiphasic fluctuations in extracellular lactate and oxygen levels following neuronal stimulation with high potassium. Furthermore, real-time measurement of lactate and oxygen concentration dynamics concurrently with network electrical activity during status epilepticus induced by 4-aminopyridine (4-AP) demonstrated phasic changes in lactate levels that correlated with bursts of electrical activity, while tonic levels of lactate remained stable during seizures. This study highlights the complex interplay between lactate dynamics, electrical activity, and oxygen utilization in epileptic seizures.

Challenges and strategies faced in the electrochemical biosensing analysis of neurochemicals in vivo: A review

Our brain is an intricate neuromodulatory network, and various neurochemicals, including neurotransmitters, neuromodulators, gases, ions, and energy metabolites, play important roles in regulating normal brain function. Abnormal release or imbalance of these substances will lead to various diseases such as Parkinson's and Alzheimer's diseases, therefore, in situ and real-time analysis of neurochemical interactions in pathophysiological conditions is beneficial to facilitate our understanding of brain function. Implantable electrochemical biosensors are capable of monitoring neurochemical signals in real time in extracellular fluid of specific brain regions because they can provide excellent temporal and spatial resolution. However, in vivo electrochemical biosensing analysis mainly faces the following challenges: First, foreign body reactions induced by microelectrode implantation, non-specific adsorption of proteins and redox products, and aggregation of glial cells, which will cause irreversible degradation of performance such as stability and sensitivity of the microsensor and eventually lead to signal loss; Second, various neurochemicals coexist in the complex brain environment, and electroactive substances with similar formal potentials interfere with each other. Therefore, it is a great challenge to design recognition molecules and tailor functional surfaces to develop in vivo electrochemical biosensors with high selectivity. Here, we take the above challenges as a starting point and detail the basic design principles for improving in vivo stability, selectivity and sensitivity of microsensors through some specific functionalized surface strategies as case studies. At the same time, we summarize surface modification strategies for in vivo electrochemical biosensing analysis of some important neurochemicals for researchers' reference. In addition, we also focus on the electrochemical detection of low basal concentrations of neurochemicals in vivo via amperometric waveform techniques, as well as the stability and biocompatibility of reference electrodes during long-term sensing, and provide an outlook on the future direction of in vivo electrochemical neurosensing.

Aptamer functionalized cell membrane for brain and nerve cell sensing with high sensitivity and stability

Accurate dopamine (DA) monitoring with high stability is essential for investigating the chemical basis of brain function and pathology. Electrochemical-based tissue-implantable carbon fiber electrodes (CFEs) show great potential in sensing the dynamics of neurochemicals at a sub-second timescale. However, their anti-fouling property, selectivity, and stability pose challenges. Here, we presented a novel strategy to enhance electrode biocompatibility and stability by modifying CFE with a chitosan (CS) film, brain cell membrane (M), and aptamer cholesterol amphiphiles (DNA-cho). We found that CFE was uniformly covered by a cicada-like membrane after being modified. Electrochemical characterizations indicated that DNA-cho-M-CS-CFE exhibited a wide linear range of DA concentration and showed high sensitivity, specificity, and stability. The electrode also presented excellent fouling resistance and biocompatibility. Moreover, the biosensor was used to detect DA in K⁺-induced brain slices and PC12 cells with a satisfactory stability and sensitivity and to prove that LPS treatment leads to the delayed and decreased release of DA. DNA-cho-M-CS-CFE showed excellent electrochemical performance and unique advantages for long-term in vivo sensing of living cells, thus providing a new feasible scheme for studying neurochemical kinetics and brain diseases.

Recent Development of Neural Microelectrodes with Dual-Mode Detection

Neurons communicate through complex chemical and electrophysiological signal patterns to develop a tight information network. A physiological or pathological event cannot be explained by signal communication mode. Therefore, dual-mode electrodes can simultaneously monitor the chemical and electrophysiological signals in the brain. They have been invented as an essential tool for brain science research and brain-computer interface (BCI) to obtain more important information and capture the characteristics of the neural network. Electrochemical sensors are the most popular methods for monitoring neurochemical levels in vivo. They are combined with neural microelectrodes to record neural electrical activity. They simultaneously detect the neurochemical and electrical activity of neurons in vivo using high spatial and temporal resolutions. This paper systematically reviews the latest development of neural microelectrodes depending on electrode materials for simultaneous in vivo electrochemical sensing and electrophysiological signal recording. This includes carbon-based microelectrodes, silicon-based microelectrode arrays (MEAs), and ceramic-based MEAs, focusing on the latest progress since 2018. In addition, the structure and interface design of various types of neural microelectrodes have been comprehensively described and compared. This could be the key to simultaneously detecting electrochemical and electrophysiological signals.

The Challenges of O2 Detection in Biological Fluids: Classical Methods and Translation to Clinical Applications

Dissolved oxygen (DO) is deeply involved in preserving the life of cellular tissues and human beings due to its key role in cellular metabolism: its alterations may reflect important pathophysiological conditions. DO levels are measured to identify pathological conditions, explain pathophysiological mechanisms, and monitor the efficacy of therapeutic approaches. This is particularly relevant when the measurements are performed in vivo but also in contexts where a variety of biological and synthetic media are used, such as ex vivo organ perfusion. A reliable measurement of medium oxygenation ensures a high-quality process. It is crucial to provide a high-accuracy, real-time method for DO quantification, which could be robust towards different medium compositions and temperatures. In fact, biological fluids and synthetic clinical fluids represent a challenging environment where DO interacts with various compounds and can change continuously and dynamically, and further precaution is needed to obtain reliable results. This study aims to present and discuss the main oxygen detection and quantification methods, focusing on the technical needs for their translation to clinical practice. Firstly, we resumed all the main methodologies and advancements concerning dissolved oxygen determination. After identifying the main groups of all the available techniques for DO sensing based on their mechanisms and applicability, we focused on transferring the most promising approaches to a clinical in vivo/ex vivo setting.

Conducting Interface for Efficient Growth of Vertically Aligned Carbon Nanotubes: Towards Nano-Engineered Carbon Composite

Vertically aligned carbon nanotubes (VACNT) are manufactured nanomaterials with excellent properties and great potential for numerous applications. Recently, research has intensified toward achieving VACNT synthesis on different planar and non-planar substrates of various natures, mainly dependent on the user-defined application. Indeed, VACNT growth has to be adjusted and optimized according to the substrate nature and shape to reach the requirements for the application envisaged. To date, different substrates have been decorated with VACNT, involving the use of diffusion barrier layers (DBLs) that are often insulating, such as SiO₂ or Al₂O₃. These commonly used DBLs limit the conducting and other vital physico-chemical properties of the final nanomaterial composite. One interesting route to improve the contact resistance of VACNT on a substrate surface and the deficient composite properties is the development of semi-/conducting interlayers. The present review summarizes different methods and techniques for the deposition of suitable conducting interfaces and controlled growth of VACNT on diverse flat and 3-D fibrous substrates. Apart from exhibiting a catalytic efficiency, the DBL can generate a conducting and adhesive interface involving performance enhancements in VACNT composites. The abilities of different conducting interlayers are compared for VACNT growth and subsequent composite properties. A conducting interface is also emphasized for the synthesis of VACNT on carbonaceous substrates in order to produce cost-effective and high-performance nano-engineered carbon composites.

Development and validation of a real-time microelectrochemical sensor for clinical monitoring of tissue oxygenation/perfusion

Oxygen is of critical importance to tissue viability and there is increasing demand for its reliable real-time clinical monitoring in order to prevent, diagnose, and treat several pathological disorders, including hypoxia, stroke and reperfusion injury. Herein we report the development and characterisation of a prototype clinical O2 sensor, and its validation in vivo, including proof-of-concept monitoring in patients undergoing surgery for carpal tunnel release. An integrated platinum-based microelectrochemical device was custom designed and controlled using a miniaturised telemetry-operated single channel clinical potentiostat. The in vitro performance of different sensor configurations is presented, with the best sensor design (S2) displaying appropriate linearity (R2 = 0.994) and sensitivity (0.569 ± 0.022 nA μM-1). Pre-clinical validation of S2 was performed in the hind limb muscle of anaesthetised rats; tourniquet application resulted in a significant rapid decrease in signal (90 ± 27%, [ΔO2] ca. 140 ± 18 μM), with a return to baseline within a period of ca. 3 min following tourniquet release. Similar trends were observed in the clinical study; an immediate decrease in signal (39 ± 3%, [ΔO2] ca. 30 ± 20 μM), with basal levels re-established within 2 min of tourniquet release. These results confirm that continuous real-time monitoring of dynamic changes in tissue O2 can serve as an indicator of reperfusion status in patients undergoing carpal tunnel surgery, and suggests the potential usefulness of the developed microelectrochemical sensor for other medical conditions where clinical monitoring of O2 and perfusion is important.

A cobalt corrole/carbon nanotube enables simultaneous electrochemical monitoring of oxygen and ascorbic acid in the rat brain

It is of interest to in vivo monitor the co-dynamics of different substances. However, the tracking of multiple species is still challenging. In this work, we demonstrate an in vivo electrochemical method by using multi-potential step amperometry to in vivo detect ascorbic acid (AA) and oxygen (O2) simultaneously. In order to achieve good selectivity and high sensitivity for both AA and O2, we design a cobalt corrole [Co(tpfc)(py)2] (tpfc = 5,10,15-tris(penta-fluorophenyl) corrole, py = pyridine, denoted as Co-TPFC) and carbon nanotube nanocomposite to modify a carbon fiber microelectrode (Co-TPFC/MWNT/CFE). This Co-TPFC/MWNT/CFE exhibits excellent electrocatalytic properties towards the reduction of O2 preceding a 4e process and facilitates the oxidation of AA at low potential in the physiological environment. Based on this, we realize simultaneous detection of AA and O2 using two-potential steps (one cathodic (-0.2 V) and the other anodic (+0.05 V)) with 1 second step time. Both in vitro and in vivo experiments proved the feasibility of this method. This demonstrated strategy is useful for us to understand various physiological and pathological processes associated with O2 and AA co-dynamics, and also provides an idea for detecting multiple substances simultaneously.

Recent Advances in Carbon-Based Metal-Free Electrocatalysts

Precious noble metals (such as Pt, Ir) and nonprecious transition metals (e.g., Fe, Co), including their compounds (e.g., oxides, nitrides), have been widely investigated as efficient catalysts for energy conversion, energy storage, important chemical productions, and many industrial processes. However, they often suffer from high cost, low selectivity, poor durability, and susceptibility to gas poisoning with adverse environmental issues. As a low-cost alternative, the first carbon-based metal-free catalyst (C-MFC based on N-doped carbon nanotubes) was discovered in 2009. Since then, various C-MFCs have been demonstrated to show similar or even better catalytic performance than their metal-based counterparts, attractive energy conversion and storage (e.g., fuel cells, metal-air batteries, water splitting), environmental remediation, and chemical production. Enormous progress has been achieved while the number of publications still rapidly increases every year. Herein, a critical overview of the very recent advances in this rapidly developing field during the last couple of years is presented.

Carbon Nanomaterials for Energy and Biorelated Catalysis: Recent Advances and Looking Forward

Along with the wide investigation activities in developing carbon-based, metal-free catalysts to replace precious metal (e.g., Pt) catalysts for various green energy devices, carbon nanomaterials have also shown great potential for biorelated applications. This article provides a focused, critical review on the recent advances in these emerging research areas. The structure-property relationship and mechanistic understanding of recently developed carbon-based, metal-free catalysts for chemical/biocatalytic reactions will be discussed along with the challenges and perspectives in this exciting field, providing a look forward for the rational design and fabrication of new carbon-based, metal-free catalysts with high activities, remarkable selectivity, and outstanding durability for various energy-related/biocatalytic processes.

Improvement of the Biocompatibility and Potential Stability of Chronically Implanted Electrodes Incorporating Coating Cell Membranes

The development of chronically implanted electrodes attracts much attention since these electrodes are much favorable for monitoring changes of neurotransmitters in brain science. The research in this field focused mainly on chemical modification to improve the potential stability and less on the biocompatibility. In this work, for the first time, we proposed the concept of cell-membrane electrodes based on a basic hypothesis using animal's self-cell membrane to reduce animal exclusiveness (hyperacute rejection and chronic rejection). As a proof of concept, we first studied cell-membrane reference electrodes for chronically implanted electrodes. Red cell membrane (RCM) was extracted from rat blood and coated on the chemically modified Ag/AgCl electrodes. It was found that ionic liquid (IL) 1-butyl-2,3-dimethylimidazolium hexafluorophosphate (BDMI) showed good performance rather than Nafion used as coating film for protection of silver chloride on Ag wire and support of the cell membrane. Electrochemical impedance spectra supported that charge-transfer resistance nearly kept constant before and after the electrodes were implanted into the rat's brain tissues for 28 days. Immunohistochemical analysis of the implant sites in the rat's brain tissues indicated that the extent of glial scarring arising from the Ag/AgCl/BDMI/RCM electrodes was smaller than that of both Ag/AgCl/Nafion and Ag/AgCl/Nafion/RCM electrodes after 28 days of implantation. The RCM-coated Ag/AgCl/IL electrodes showed a relatively potential stability compared to RCM-noncoated Ag/AgCl/IL electrodes after 28 days of implantation. Additionally, the current-voltage curve demonstrated that the RCM-coated electrodes can be used as polarized electrodes. This work demonstrated that the RCM, which was coated on the Ag/AgCl/IL electrodes, can significantly improve the biocompatibility and potential stability of the RCM-noncoated Ag/AgCl/IL electrodes implanted in the rat brain. The cell-membrane-coated electrodes will serve as a lighthouse in guiding the design of chronically implanted electrodes for in vivo electrochemical detection.

Wireless, battery-free optoelectronic systems as subdermal implants for local tissue oximetry

Monitoring regional tissue oxygenation in animal models and potentially in human subjects can yield insights into the underlying mechanisms of local O2-mediated physiological processes and provide diagnostic and therapeutic guidance for relevant disease states. Existing technologies for tissue oxygenation assessments involve some combination of disadvantages in requirements for physical tethers, anesthetics, and special apparatus, often with confounding effects on the natural behaviors of test subjects. This work introduces an entirely wireless and fully implantable platform incorporating (i) microscale optoelectronics for continuous sensing of local hemoglobin dynamics and (ii) advanced designs in continuous, wireless power delivery and data output for tether-free operation. These features support in vivo, highly localized tissue oximetry at sites of interest, including deep brain regions of mice, on untethered, awake animal models. The results create many opportunities for studying various O2-mediated processes in naturally behaving subjects, with implications in biomedical research and clinical practice.

O2 Plasma Etching and Antistatic Gun Surface Modifications for CNT Yarn Microelectrode Improve Sensitivity and Antifouling Properties

Carbon nanotube (CNT) based microelectrodes exhibit rapid and selective detection of neurotransmitters. While different fabrication strategies and geometries of CNT microelectrodes have been characterized, relatively little research has investigated ways to selectively enhance their electrochemical properties. In this work, we introduce two simple, reproducible, low-cost, and efficient surface modification methods for carbon nanotube yarn microelectrodes (CNTYMEs): O2 plasma etching and antistatic gun treatment. O2 plasma etching was performed by a microwave plasma system with oxygen gas flow and the optimized time for treatment was 1 min. The antistatic gun treatment flows ions by the electrode surface; two triggers of the antistatic gun was the optimized number on the CNTYME surface. Current for dopamine at CNTYMEs increased 3-fold after O2 plasma etching and 4-fold after antistatic gun treatment. When the two treatments were combined, the current increased 12-fold, showing the two effects are due to independent mechanisms that tune the surface properties. O2 plasma etching increased the sensitivity due to increased surface oxygen content but did not affect surface roughness while the antistatic gun treatment increased surface roughness but not oxygen content. The effect of tissue fouling on CNT yarns was studied for the first time, and the relatively hydrophilic surface after O2 plasma etching provided better resistance to fouling than unmodified or antistatic gun treated CNTYMEs. Overall, O2 plasma etching and antistatic gun treatment improve the sensitivity of CNTYMEs by different mechanisms, providing the possibility to tune the CNTYME surface and enhance sensitivity.

The Electrochemical Behavior of Carbon Fiber Microelectrodes Modified with Carbon Nanotubes Using a Two-Step Electroless Plating/Chemical Vapor Deposition Process

Carbon fiber microelectrode (CFME) has been extensively applied in the biosensor and chemical sensor domains. In order to improve the electrochemical activity and sensitivity of the CFME, a new CFME modified with carbon nanotubes (CNTs), denoted as CNTs/CFME, was fabricated and investigated. First, carbon fiber (CF) monofilaments grafted with CNTs (simplified as CNTs/CFs) were fabricated in two key steps: (i) nickel electroless plating, followed by (ii) chemical vapor deposition (CVD). Second, a single CNTs/CF monofilament was selected and encapsulated into a CNTs/CFME with a simple packaging method. The morphologies of as-prepared CNTs/CFs were characterized by scanning electron microscopy. The electrochemical properties of CNTs/CFMEs were measured in potassium ferrocyanide solution (K₄Fe(CN)₆), by using a cyclic voltammetry (CV) and a chronoamperometry method. Compared with a bare CFME, a CNTs/CFME showed better CV curves with a higher distinguishable redox peak and response current; the higher the CNT content was, the better the CV curves were. Because the as-grown CNTs significantly enhanced the effective electrode area of CNTs/CFME, the contact area between the electrode and reactant was enlarged, further increasing the electrocatalytic active site density. Furthermore, the modified microelectrode displayed almost the same electrochemical behavior after 104 days, exhibiting remarkable stability and outstanding reproducibility.

Label-Free Electrochemical Biosensor for Monitoring of Chloride Ion in an Animal Model of Alzhemier's Disease

The potential damage of Alzheimer's disease (AD) in brain function has attracted extensive attention. As the most common anion, Cl^- has been indicated to play significant roles in brain diseases, particularly in the pathological process of AD. In this work, a label-free selective and accurate electrochemical biosensor was first developed for real-time monitoring of Cl^- levels in a mouse brain model of AD and rat brain upon global cerebral ischemia. Silver nanoparticles (AgNPs) were designed and synthesized as selective recognition element for Cl^-, while 5'-MB-GGCGCGATTTT-SH-3' (SH-DNA-MB, MB = methylene blue) was selected as an inner reference molecule for a built-in correction to avoid the effects from the complicated brain. The electrochemical biosensor showed high accuracy and remarkable selectivity for determination of Cl^- over other anions, metal ions, amino acids, and other biomolecules. Furthermore, three-dimensional nanostructures composed of single-walled carbon nanotubes (SWNTs) and Au nanoleaves were assembled on the carbon fiber microelectrode (CFME) surface to enhance the response signal. Finally, the developed biosensor with high analytical performance, as well as the unique characteristic of CFME itself including inertness in live brain and good biocompatibility, was successfully applied to in vivo determination of Cl^- levels in three brain regions: striatum, hippocampus, and cortex of live mouse and rat brains. The comparison of average levels of Cl^- in normal striatum, hippocampus, and cortex of normal mouse brains and those in the mouse model brains of AD was reported. In addition, the results in rat brains followed by cerebral ischemia demonstrated that the concentrations of Cl^- decreased by 19.8 ± 0.5% (n = 5) in the striatum and 27.2 ± 0.3% (n = 5) in hippocampus after cerebral ischemia for 30 min, but that negligible change in Cl^- concentration was observed in cortex.

A simple functional carbon nanotube fiber for in vivo monitoring of NO in a rat brain following cerebral ischemia

A simple ratiometric electrochemical biosensor for NO monitoring in rat brain following cerebral ischemia was developed based on a carbon nanotube fiber modified with hemin.

In vivo Monitoring of Serotonin by Nanomaterial Functionalized Acupuncture Needle

Acupuncture treatment is amazing but controversial. Up to now, the mechanism of treating diseases by acupuncture and moxibustion is still unclear, especially the occurrence of the molecular events in local acupoints. Herein, we report an extremely stable microsensor by modifying carbon nanotube (CNT) to the tip surface of acupuncture needle and applying this CNT-modified acupuncture needle for real time monitoring of serotonin (5-HT) in vivo. To stabilize CNT modification on the needle tip surface, poly(3,4-ethylenedioxythiophene)(PEDOT) was employed as glue water to stick CNT on the needle. The detection limit of the CNT-modified needle was found to be approximately 50 nM and 78 nM in the PBS and the cell medium, respectively. In addition, the needle showed good selectivity to some inflammatory mediators and some electroactive molecules. For the first time, the CNT-modified needle could be directly probed into rat body for real time monitoring of 5-HT in vivo, showing a great potential for better understanding the mechanism of acupuncture treatment.

Laser Treated Carbon Nanotube Yarn Microelectrodes for Rapid and Sensitive Detection of Dopamine in Vivo

Carbon nanotube yarn microelectrodes (CNTYMEs) exhibit rapid and selective detection of dopamine with fast-scan cyclic voltammetry (FSCV); however, the sensitivity limits their application in vivo. In this study, we introduce laser treatment as a simple, reliable, and efficient approach to improve the sensitivity of CNTYMEs by three fold while maintaining high temporal resolution. The effect of laser treatment on the microelectrode surface was characterized by scanning electron microscopy, Raman spectroscopy, energy dispersion spectroscopy, and laser confocal microscopy. Laser treatment increases the surface area and oxygen containing functional groups on the surface, which provides more adsorption sites for dopamine than at unmodified CNTYMEs. Moreover, similar to unmodified CNTYMEs, the dopamine signal at laser treated CNTYMEs is not dependent on scan repetition frequency, unlike the current at carbon fiber microelectrodes (CFMEs) which decreases with increasing scan repetition frequency. This frequency independence is caused by the significantly larger surface roughness which would trap dopamine-o-quinone and amplify the dopamine signal. CNTYMEs were applied as an in vivo sensor with FSCV for the first time and laser treated CNTYMEs maintained high dopamine sensitivity compared to CFMEs with an increased scan repetition frequency of 50 Hz, which is five-fold faster than the conventional frequency. CNTYMEs with laser treatment are advantageous because of their easy fabrication, high reproducibility, fast electron transfer kinetics, high sensitivity, and rapid in vivo measurement of dopamine and could be a potential alternative to CFMEs in the future.

Tuning interionic interaction for highly selective in vivo analysis

The development of highly selective methodologies to enable in vivo recording of chemical signals is of great importance for studying brain functions and brain activity mapping. However, the complexity of cerebral systems presents a great challenge in the development of chem/(bio)sensors that are capable of directly and selectively recording bioactive molecules involved in brain functions. As one of the most important and popular interactions in nature, interionic interaction constitutes the chemical essence of high specificity in natural systems, which inspires us to develop highly selective chem/(bio)sensors for in vivo analysis by precisely engineering interionic interaction in the in vivo sensing system. In this tutorial review, we focus on the recent progress in the tuning of interionic interaction to improve the selectivity of biosensors for in vivo analysis. The type and property of the interionic interaction is first introduced and several strategies to improve the selectivity of the biosensors, including enzyme-based electrochemical biosensors, aptamer-based electrochemical biosensors, and the strategies to recruit recognition molecules are reviewed. We also present an overview of the potential applications of the biosensors for in vivo analysis and thereby for physiological investigations. Finally, we present the major challenges and opportunities regarding the high selectivity of in vivo analysis based on tuning interionic interaction. We believe that this tutorial review provides critical insights for highly selective in vivo analysis and offers new concepts and strategies to understand brain chemistry.

Construction of titanium dioxide nanorod/graphite microfiber hybrid electrodes for a high performance electrochemical glucose biosensor

The demand for a highly sensitive and selective glucose biosensor which can be used for implantable or on-time monitoring is constantly increasing. In this work, TiO2 nanorods were synthesized in situ on the surface of graphite microfibers to yield TiO2 nanorod/graphite microfiber hybrid electrodes. The TiO2 nanorods not only retain the high activity of the immobilized glucose molecule, but also promote the direct electron transfer process on the electrode surface. As a working electrode in an electrochemical glucose biosensor in a flowing system, the microfiber hybrid electrodes exhibit high sensitivity, selectivity and stability. Due to its simplicity, low cost, high stability, and unique morphology, the TiO2 nanorod/graphite microfiber hybrid electrode is expected to be an excellent candidate for an implantable biosensor or for in situ flow monitoring.

Recent development of carbon electrode materials and their bioanalytical and environmental applications

New synthetic approaches, materials, properties, electroanalytical applications and perspectives of carbon materials are presented.

Online electrochemical systems for continuous neurochemical measurements with low-potential mediator-based electrochemical biosensors as selective detectors

This study demonstrates a new strategy to develop online electrochemical systems (OECSs) for continuously monitoring neurochemicals by efficiently integrating in vivo microdialysis with an oxidase-based electrochemical biosensor with low-potential electron mediators to shuttle the electron transfer of the oxidases.

Ferricyanide-backfilled cylindrical carbon fiber microelectrodes for in vivo analysis with high stability and low polarized potential

A ferricyanide-backfilled cylindrical carbon fiber microelectrode of high stability and low polarized potential was fabricated and used for in vivo analysis.