Surface plasmon resonance study of protein-carbohydrate interactions using biotinylated sialosides

In-situ profiling of glycosylation on single cells with surface plasmon resonance imaging

Cellular glycosylation is crucial for cell recognition, signal transduction, and the development of various diseases, especially in tumor initiation, progression, and metastasis. Current glycosylation profiling methods normally involve laborious sample processing and labeling and lack in-situ quantitative analysis. Here, we present a direct optical method to investigate and quantify the glycan expression on single cells based on lectin-glycan kinetic quantification with plasmonic imaging. Three unlabeled lectins (WGA, SBA, ConA) are employed as probes to bind with specific glycans, and binding kinetics are assessed to determine glycosylation profiles. The result reveals cell-to-cell heterogeneity in glycosylation patterns. To demonstrate the capability of our method, the glycosylation profiling of four distinct cell lines is explored, showing obvious alterations in glycan expression related to tumor initiation, progression, and metastasis. This approach enables direct quantification of glycosylation and binding kinetics, providing insights into tumor cell glycosylation mechanisms and potential applications in disease diagnosis and treatment.

Impact of Lectin biotinylation for surface plasmon resonance and enzyme-linked Lectin assays for protein glycosylation

Lectins are widely employed for the assessment of protein glycosylation as their carbohydrate binding specificities have been well characterized. In glycosylation assays, lectins are often conjugated with biotin tags, which interact with streptavidin to functionalize biosensing surfaces or recruit signal generating molecules, depending on the assay configuration. We here demonstrate that a high degree of biotin conjugation can limit total capture to streptavidin functionalized SPR surfaces due to multipoint binding, and can additionally bias the reported kinetic evaluations when measuring the interaction between lectins and glycoproteins by SPR. For microplate assays using different configurations, high biotinylation ratios can effectively amplify the signal obtained when using Streptavidin conjugates for detection, in some cases significantly lowering the limit of detection. The cumulative results express the importance of customizing the ligand biotinylation ratios for different assay configurations, as commercially obtained pre-biotinylated lectins are not necessarily optimized for different assay configurations.

Single-molecule imaging reveals allosteric stimulation of SARS-CoV-2 spike receptor binding domain by host sialic acid

Conformational dynamics of the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) spike glycoprotein (S) mediate exposure of the binding site for the cellular receptor, angiotensin-converting enzyme 2 (ACE2). The N-terminal domain (NTD) of S binds terminal sialic acid (SA) moieties on the cell surface, but the functional role of this interaction in virus entry is unknown. Here, we report that NTD-SA interaction enhances both S-mediated virus attachment and ACE2 binding. Through single-molecule Förster resonance energy transfer imaging of individual S trimers, we demonstrate that SA binding to the NTD allosterically shifts the S conformational equilibrium, favoring enhanced exposure of the ACE2-binding site. Antibodies that target the NTD block SA binding, which contributes to their mechanism of neutralization. These findings inform on mechanisms of S activation at the cell surface.

An α-helical peptide-based plasmonic biosensor for highly specific detection of α-synuclein toxic oligomers

BACKGROUND

α-Synuclein (αS) aggregation is the main neurological hallmark of a group of neurodegenerative disorders, collectively referred to as synucleinopathies, of which Parkinson's disease (PD) is the most prevalent. αS oligomers are elevated in the cerebrospinal fluid (CSF) of PD patients, standing as a biomarker for disease diagnosis. However, methods for early PD detection are still lacking. We have recently identified the amphipathic 22-residue peptide PSMα3 as a high-affinity binder of αS toxic oligomers. PSMα3 displayed excellent selectivity and reproducibility, binding to αS toxic oligomers with affinities in the low nanomolar range and without detectable cross-reactivity with functional monomeric αS.

RESULTS

In this work, we leveraged these PSMα3 unique properties to design a plasmonic-based biosensor for the direct detection of toxic oligomers under label-free conditions.

SIGNIFICANCE AND NOVELTY

We describe the integration of the peptide in a lab-on-a-chip plasmonic platform suitable for point-of-care measurements of αS toxic oligomers in CSF samples in real-time and at an affordable cost, providing an innovative biosensor for PD early diagnosis in the clinic.

Chemoenzymatic synthesis of genetically-encoded multivalent liquid N-glycan arrays

Cellular glycosylation is characterized by chemical complexity and heterogeneity, which is challenging to reproduce synthetically. Here we show chemoenzymatic synthesis on phage to produce a genetically-encoded liquid glycan array (LiGA) of complex type N-glycans. Implementing the approach involved by ligating an azide-containing sialylglycosyl-asparagine to phage functionalized with 50-1000 copies of dibenzocyclooctyne. The resulting intermediate can be trimmed by glycosidases and extended by glycosyltransferases yielding a phage library with different N-glycans. Post-reaction analysis by MALDI-TOF MS allows rigorous characterization of N-glycan structure and mean density, which are both encoded in the phage DNA. Use of this LiGA with fifteen glycan-binding proteins, including CD22 or DC-SIGN on cells, reveals optimal structure/density combinations for recognition. Injection of the LiGA into mice identifies glycoconjugates with structures and avidity necessary for enrichment in specific organs. This work provides a quantitative evaluation of the interaction of complex N-glycans with GBPs in vitro and in vivo.

"Clickable" Organic Electrochemical Transistors

Interfacing the surface of an organic semiconductor with biological elements is a central quest when it comes to the development of efficient organic bioelectronic devices. Here, we present the first example of "clickable" organic electrochemical transistors (OECTs). The synthesis and characterization of an azide-derivatized EDOT monomer (azidomethyl-EDOT, EDOT-N₃) are reported, as well as its deposition on Au-interdigitated electrodes through electropolymerization to yield PEDOT-N₃-OECTs. The electropolymerization protocol allows for a straightforward and reliable tuning of the characteristics of the OECTs, yielding transistors with lower threshold voltages than PEDOT-based state-of-the-art devices and maximum transconductance voltage values close to 0 V, a key feature for the development of efficient organic bioelectronic devices. Subsequently, the azide moieties are employed to click alkyne-bearing molecules such as redox probes and biorecognition elements. The clicking of an alkyne-modified PEG₄-biotin allows for the use of the avidin-biotin interactions to efficiently generate bioconstructs with proteins and enzymes. In addition, a dibenzocyclooctyne-modified thrombin-specific HD22 aptamer is clicked on the PEDOT-N₃-OECTs, showing the application of the devices toward the development of organic transistors-based biosensors. Finally, the clicked OECTs preserve their electronic features after the different clicking procedures, demonstrating the stability and robustness of the fabricated transistors.

96-well plate format in conjunction with ultra-high-performance liquid chromatography coupled to orbitrap mass spectrometry for high-throughput screening protein binders from ginseng

Conventional strategies for screening of protein binders cannot be used for complicated samples such as ligand libraries created by combinatorial chemistry or from natural product extracts. In the current study, we developed a novel method in a competitive binding configuration for screening protein binders from complicated samples by a combination of streptavidin-coated 96-well plate format in conjunction with ultra-high-performance liquid chromatography coupled with Orbitrap mass spectrometry (UHPLC-Orbitrap-MS). The concanavalin A (Con A) modified 96-well plate and lysozyme modified 96-well plate (as control) were incubated with oligosaccharide standards respectively, and the compounds with the decreased peak areas in experimental group compared to those in the control group were detected as binders by UHPLC-ESI-MS. The factors such as incubation time, incubation temperature, and buffer, which might affect the binding affinity and reproducibility were optimized. The potential of the approach is examined using the extracts of Radix ginseng cruda and American ginseng. The relative binding degrees (RBDs) of the detected disaccharides were relatively high in the extracts of Radix ginseng cruda, and those of the trisaccharides were similar in the extracts of the two kinds of ginseng. To our knowledge, it's the first time to reveal the differences and analogies in lectin peanut agglutinin (PNA)-binding capabilities of oligosaccharides between the extracts of radix ginseng cruda and American ginseng, indicating the efficiency of the method for analysis of complicated samples.

The Synthesis and Evaluation of Multivalent Glycopeptoids as Inhibitors of the Adhesion of Candida albicans

Multivalency is a strategy commonly used by medicinal carbohydrate chemists to increase the affinity of carbohydrate-based small molecules for their protein targets. Although this approach has been very successful in enhancing binding to isolated carbohydrate-binding proteins, anticipating the multivalent presentations that will improve biological activity in cellular assays remains challenging. In this work we investigate linear molecular scaffolds for the synthesis of a low valency presentation of a divalent galactoside 1, previously identified by us as an inhibitor of the adhesion of opportunistic fungal pathogen Candida albicans to buccal epithelial cells (BECs). Adhesion inhibition assays revealed that multivalent glycoconjugate 3 is more effective at blocking C. albicans adherence to BECs upon initial exposure to epithelial cells. Interestingly, 3 did not seem to have any effect when it was pre-incubated with yeast cells, in contrast to the original lead compound 1, which caused a 25% reduction of adhesion. In competition assays, where yeast cells and BECs were co-incubated, multivalent glycoconjugate 3 inhibited up to 49% C. albicans adherence in a dose-dependent manner. The combined effect of compound 1 towards both yeast cells and BECs allowed it to achieve over 60% inhibition of the adhesion of C. albicans to BECs in competition assays.

The Role of Surface Chemistry in the Efficacy of Protein and DNA Microarrays for Label-Free Detection: An Overview

The importance of microarrays in diagnostics and medicine has drastically increased in the last few years. Nevertheless, the efficiency of a microarray-based assay intrinsically depends on the density and functionality of the biorecognition elements immobilized onto each sensor spot. Recently, researchers have put effort into developing new functionalization strategies and technologies which provide efficient immobilization and stability of any sort of molecule. Here, we present an overview of the most widely used methods of surface functionalization of microarray substrates, as well as the most recent advances in the field, and compare their performance in terms of optimal immobilization of the bioreceptor molecules. We focus on label-free microarrays and, in particular, we aim to describe the impact of surface chemistry on two types of microarray-based sensors: microarrays for single particle imaging and for label-free measurements of binding kinetics. Both protein and DNA microarrays are taken into consideration, and the effect of different polymeric coatings on the molecules' functionalities is critically analyzed.

Label-Free, Multiplex Glycan Microarray Biosensor for Influenza Virus Detection

Newly emerging influenza viruses adapted from animal species pose significant pandemic threats to public health. An understanding of hemagglutinin (HA) receptor-binding specificity to host receptors is key to studying the adaptation of influenza viruses in humans. This information may be particularly useful for predicting the emergence of a pandemic outbreak. Therefore, high-throughput sensing technologies able to profile HA receptor binding can facilitate studies of influenza virus evolution and adaptation in humans. As a step toward this goal, we have prepared glycan-based receptor analogue microarrays on the Arrayed Imaging Reflectometry (AIR) platform. These arrays demonstrate label-free, multiplex detection and discrimination between human and avian influenza viruses. Microarrays consisting of glycan probes with 2,6 and 2,3 linkages were prepared. After first confirming their ability to capture lectins (carbohydrate-binding proteins) with known specificities, we observed that the arrays were able to discriminate between and quantify human pandemic influenza A/California/07/2009 (H1N1pdm) and avian A/Netherlands/1/2000 (H13N8) influenza viruses, respectively. As the method may be expanded to large numbers of glycans (>100) and virus subtypes (H1-H18), we anticipate it can be applied to systematically evaluate influenza virus adaptation in humans. In turn, this will facilitate global influenza surveillance and serve as a new tool enabling health organizations, governments, research institutes, and laboratories to react quickly in the face of a pandemic outbreak.

Recent progress on developing of plasmon biosensing of tumor biomarkers: Efficient method towards early stage recognition of cancer

Cancer is the second most extended disease with an improved death rate over the past several time. Due to the restrictions of cancer analysis methods, the patient's real survival rate is unknown. Therefore, early stage diagnosis of cancer is crucial for its strong detection. Bio-analysis based on biomarkers may help to overcome the problem Biosensors with high sensitivity and specificity, low-cost, high analysis speed and minimum limit of detection are practical alternatives for laboratory tests. Surface plasmon resonance (SPR) is reaching a maturity level sufficient for their application in detection and determination cancer biomarkers in clinical samples. This review discusses main concepts and performance characteristics of SPR biosensor. Mainly, it focuses on newly emerged enhanced SPR biosensors towards high-throughput and ultrasensitive screening of cancer biomarkers such as PSA, α-fetoprotein, CEA, CA125, CA 15-3, HER2, ctDNA, ALCAM, hCG, VEGF, TNF, Interleukin, IFN-γ, CD24, CD44, Ferritin, COLIV using labeling processes with focusing on the future application in biomedical research and clinical diagnosis. This article reviews current status of the field, showcasing a series of early successes in the application of SPR for clinical bioanalysis of cancer related biomolecules and detailing a series of considerations regarding sensing schemes, exposing issues with analysis in biofluids, while providing an outlook of the challenges currently associated with plasmonic materials, bioreceptor selection, microfluidics, and validation of a clinical bioassay for applying SPR biosensors to clinical samples. Research opportunities are proposed to further advance the field and transition SPR biosensors from research proof-of-concept stage to actual clinical usage.

Efficient chemoenzymatic synthesis of fluorinated sialyl Thomsen-Friedenreich antigens and investigation of their characteristics

A set of fluorinated sialyl-T derivatives were efficiently synthesized using one-pot multi-enzyme (OPME) chemoenzymatic approach. The P. multocida α2-3-sialyltransferase (PmST1) involved in the synthesis showed extremely flexible donor and acceptor substrate specificities. These sialosides have been successfully investigated with stability towards Clostridium perfringens sialidase substrate specificity assay using ¹H NMR spectroscopy. Hydrolysis studies monitored by ¹H NMR clearly demonstrated that the fluorine substitution obviously reduced hydrolysis rate of Clostridium perfringens sialidase. To further investigate the fluorine influence, structure-dependent variation of sialoside-lectin binding was observed for MAL and different sialoside-immobilized surfaces. Subtle changes on the ligand of carbohydrate-binding protein were distinguished by SPR. These fluorinated sialyl-T derivatives obtained are valuable probes for further biological studies or antitumor drug design.

Lectin-carbohydrate complex evaluation by chemiluminescence

In order to characterize the affinity between specific carbohydrate-binding proteins such as lectins, a model is proposed to study these interactions using a polysaccharide membrane to simulate such adsorption. Here, lectin-carbohydrate interactions were chemiluminescently investigated using lectins conjugated to acridinium ester (AE) and polysaccharides composed of their respective specific carbohydrates. The lectin-AE conjugates were incubated with discs (0.0314-0.6358 cm²) of phytagel, chitosan and carrageenan. The complex formation chemiluminescently detected followed the Langmuir isotherm from which constants were estimated. The association constant (K_a) and maximum binding sites on the membranes were 2.4 × 10^-7 M^-1 ± 0.8 × 10^-7 M^-1 and 1.3 × 10^-3 mol. mg^-1 ± 0.3 × 10^-3 mol. mg^-1 (Con A); 0.9 × 10^-6 M^-1 ± 0.4 × 10^-6 M^-1 and 0.021 × 10^-3 mol. mg^-1 ± 0.003 × 10^-3 mol. mg^-1 (WGA) and 2.0 × 10^-6 M^-1 ± 0.9 × 10^-6 M^-1 and 0.069 × 10^-3 mol. mg^-1 ± 0.010 × 10^-3 mol. mg^-1 (PNA). The proposed model might be useful to study binding affinity and estimate the amount of binding not limited by the sugar content in the membrane.

Modulators of IgG penetration through the blood-brain barrier: Implications for Alzheimer's disease immunotherapy

This review serves to highlight approaches that may improve the access of antibody drugs to regions of the brain affected by Alzheimer's Disease. While previous antibody drugs have been unsuccessful in treating Alzheimer's disease, recent work demonstrates that Alzheimer's pathology can be modified if these drugs can penetrate the brain parenchyma with greater efficacy. Research in antibody blood-brain barrier drug delivery predominantly follows one of three distinct directions: (1) enhancing influx with reduced antibody size, addition of Trojan horse modules, or blood-brain barrier disruption; (2) modulating trancytotic equilibrium and/or kinetics of the neonatal Fc Receptor; and (3) manipulation of antibody glycan carbohydrate composition. In addition to these topics, recent studies are discussed that reveal a role of glycan sialic acid in suppressing antibody efflux from the brain.

Dissecting Multivalent Lectin-Carbohydrate Recognition Using Polyvalent Multifunctional Glycan-Quantum Dots

Multivalent protein-carbohydrate interactions initiate the first contacts between virus/bacteria and target cells, which ultimately lead to infection. Understanding the structures and binding modes involved is vital to the design of specific, potent multivalent inhibitors. However, the lack of structural information on such flexible, complex, and multimeric cell surface membrane proteins has often hampered such endeavors. Herein, we report that quantum dots (QDs) displayed with a dense array of mono-/disaccharides are powerful probes for multivalent protein-glycan interactions. Using a pair of closely related tetrameric lectins, DC-SIGN and DC-SIGNR, which bind to the HIV and Ebola virus glycoproteins (EBOV-GP) to augment viral entry and infect target cells, we show that such QDs efficiently dissect the different DC-SIGN/R-glycan binding modes (tetra-/di-/monovalent) through a combination of multimodal readouts: Förster resonance energy transfer (FRET), hydrodynamic size measurement, and transmission electron microscopy imaging. We also report a new QD-FRET method for quantifying QD-DC-SIGN/R binding affinity, revealing that DC-SIGN binds to the QD >100-fold tighter than does DC-SIGNR. This result is consistent with DC-SIGN's higher trans-infection efficiency of some HIV strains over DC-SIGNR. Finally, we show that the QDs potently inhibit DC-SIGN-mediated enhancement of EBOV-GP-driven transduction of target cells with IC50 values down to 0.7 nM, matching well to their DC-SIGN binding constant (apparent Kd = 0.6 nM) measured by FRET. These results suggest that the glycan-QDs are powerful multifunctional probes for dissecting multivalent protein-ligand recognition and predicting glyconanoparticle inhibition of virus infection at the cellular level.

Antibody blood-brain barrier efflux is modulated by glycan modification

BACKGROUND

Drug delivery to the brain is a major roadblock to treatment of Alzheimer's disease. Recent results of the PRIME study indicate that increasing brain penetration of antibody drugs improves Alzheimer's treatment outcomes. New approaches are needed to better accomplish this goal. Based on prior evidence, the hypothesis that glycan modification alters antibody blood-brain barrier permeability was tested here.

METHODS

The blood-brain barrier permeability coefficient Pe of different glycosylated states of anti-amyloid IgG was measured using in vitro models of brain microvascular endothelial cells. Monoclonal antibodies 4G8, with sialic acid, and 6E10, lacking sialic acid, were studied. The amount of sialic acid was determined using quantitative and semi-quantitative surface plasmon resonance methods.

RESULTS

Influx of IgG was not saturable and was largely insensitive to IgG species and glycosylation state. By contrast, efflux of 4G8 efflux was significantly lower than both albumin controls and 6E10. Removal of α2,6-linked sialic acid group present on 12% of 4G8 completely restored efflux to that of 6E10 but increasing the α2,6-sialylated fraction to 15% resulted in no change. Removal of the Fc glycan from 4G8 partially restored efflux. Alternate sialic acid groups with α2,3 and α2,8 linkages, nor on the Fc glycan, were not detected at significant levels on either 4G8 or 6E10.

CONCLUSIONS

These results support a model in which surface-sialylated 4G8 inhibits its own efflux and that of asialylated 4G8.

GENERAL SIGNIFICANCE

Glycan modification has the potential to increase antibody drug penetration into the brain through efflux inhibition.

Anti-aβ oligomer IgG and surface sialic acid in intravenous immunoglobulin: measurement and correlation with clinical outcomes in Alzheimer's disease treatment

The fraction of IgG antibodies with anti-oligomeric Aβ affinity and surface sialic acid was compared between Octagam and Gammagard intravenous immunoglobulin (IVIG) using two complementary surface plasmon resonance methods. These comparisons were performed to identify if an elevated fraction existed in Gammagard, which reported small putative benefits in a recent Phase III clinical trial for Alzheimer’s Disease. The fraction of anti-oligomeric Aβ IgG was found to be higher in Octagam, for which no cognitive benefits were reported. The fraction and location of surface-accessible sialic acid in the Fab domain was found to be similar between Gammagard and Octagam. These findings indicate that anti-oligomeric Aβ IgG and total surface sialic acid alone cannot account for reported clinical differences in the two IVIG products. A combined analysis of sialic acid in anti-oligomeric Aβ IgG did reveal a notable finding that this subgroup exhibited a high degree of surface sialic acid lacking the conventional α2,6 linkage. These results demonstrate that the IVIG antibodies used to engage oligomeric Aβ in both Gammagard and Octagam clinical trials did not possess α2,6-linked surface sialic acid at the time of administration. Anti-oligomeric Aβ IgG with α2,6 linkages remains untested as an AD treatment.

Electrochemical synthesis of nanostructured gold film for the study of carbohydrate-lectin interactions using localized surface plasmon resonance spectroscopy

Localized surface plasmon resonance (LSPR) spectroscopy is a label-free chemical and biological molecular sensing technique whose sensitivity depends upon development of nanostructured transducers. Herein, we report an electrodeposition method for fabricating nanostructured gold films (NGFs) that can be used as transducers in LSPR spectroscopy. The NGF was prepared by electrodepositing gold from potassium dicyanoaurate solution onto a flat gold surface using two sequential controlled potential steps. Imaging by scanning electron microscopy reveals a morphology consisting of randomly configured block-like nanostructures. The bulk refractive index sensitivity of the prepared NGF is 100±2 nmRIU(-1) and the initial peak in the reflectance spectrum is at 518±1 nm under N2(g). The figure of merit is 1.7. In addition, we have studied the interaction between carbohydrate (mannose) and lectin (Concanavalin A) on the NGF surface using LSPR spectroscopy by measuring the interaction of 8-mercaptooctyl-α-d-mannopyranoside (αMan-C8-SH) with Concanavalin A by first immobilizing αMan-C8-SH in mixed SAMs with 3,6-dioxa-8-mercaptooctanol (TEG-SH) on the NGF surface. The interaction of Con A with the mixed SAMs is confirmed using electrochemical impedance spectroscopy. Finally, the NGF surface was regenerated to its original sensitivity by removing the SAM and the bound biomolecules. The results from these experiments contribute toward the development of inexpensive LSPR based sensors that could be useful for studying glycan-protein interactions and other bioanalytical purposes.

Quantitative assessment of the multivalent protein-carbohydrate interactions on silicon

A key challenge in the development of glycan arrays is that the sensing interface be fabricated reliably so as to ensure the sensitive and accurate analysis of the protein-carbohydrate interaction of interest, reproducibly. These goals are complicated in the case of glycan arrays as surface sugar density can influence dramatically the strength and mode of interaction of the sugar ligand at any interface with lectin partners. In this Article, we describe the preparation of carboxydecyl-terminated crystalline silicon (111) surfaces onto which are grafted either mannosyl moieties or a mixture of mannose and spacer alcohol molecules to provide "diluted" surfaces. The fabrication of the silicon surfaces was achieved efficiently through a strategy implicating a "click" coupling step. The interactions of these newly fabricated glycan interfaces with the lectin, Lens culinaris, have been characterized using quantitative infrared (IR) spectroscopy in the attenuated total geometry (ATR). The density of mannose probes and lectin targets was precisely determined for the first time by the aid of special IR calibration experiments, thus allowing for the interpretation of the distribution of mannose and its multivalent binding with lectins. These experimental findings were accounted for by numerical simulations of lectin adsorption.

Exploration of sialic acid diversity and biology using sialoglycan microarrays

Sialic acids (Sias) are a group of α-keto acids with a nine-carbon backbone, which display many types of modifications in nature. The diversity of natural Sia presentations is magnified by a variety of glycosidic linkages to underlying glycans, the sequences and classes of such glycans, as well as the spatial organization of Sias with their surroundings. This diversity is closely linked to the numerous and varied biological functions of Sias. Relatively large libraries of natural and unnatural Sias have recently been chemically/chemoenzymatically synthesized and/or isolated from natural sources. The resulting sialoglycan microarrays have proved to be valuable tools for the exploration of diversity and biology of Sias. Here we provide an overview of Sia diversity in nature, the approaches used to generate sialoglycan microarrays, and the achievements and challenges arising.

BAD-lectins: boronic acid-decorated lectins with enhanced binding affinity for the selective enrichment of glycoproteins

The weak and variable binding affinities exhibited by lectin-carbohydrate interactions have often compromised the practical utility of lectin in capturing glycoproteins for glycoproteomic applications. We report here the development and applications of a new type of hybrid biomaterial, namely a boronic acid-decorated lectin (BAD-lectin), for efficient bifunctional glycoprotein labeling and enrichment. Our binding studies showed an enhanced affinity by BAD-lectin, likely to be mediated via the formation of boronate ester linkages between the lectin and glycan subsequent to the initial recognition process and thus preserving its glycan-specificity. Moreover, when attached to magnetic nanoparticles (BAD-lectin@MNPs), 2 to 60-fold improvement on detection sensitivity and enrichment efficiency for specific glycoproteins was observed over the independent use of either lectin or BA. Tested at the level of whole cell lysates for glycoproteomic applications, three different types of BAD-lectin@MNPs exhibited excellent specificities with only 6% overlapping among the 295 N-linked glycopeptides identified. As many as 236 N-linked glycopeptides (80%) were uniquely identified by one of the BAD-lectin@MNPs. These results indicated that the enhanced glycan-selective recognition and binding affinity of BAD-lectin@MNPs will facilitate a complementary identification of the under-explored glycoproteome.

Conformationally constrained functional peptide monolayers for the controlled display of bioactive carbohydrate ligands

In this study, we employed thiolated peptides of the conformationally constrained, strongly helicogenic α-aminoisobutyric acid (Aib) residue to prepare self-assembled monolayers (SAMs) on gold surfaces. Electrochemistry and infrared reflection absorption spectroscopy support the formation of very well packed Aib-peptide SAMs. The immobilized peptides retain their helical structure, and the resulting SAMs are stabilized by a network of intermolecular H bonds involving the NH groups adjacent to the Au surface. Binary SAMs containing a synthetically defined glycosylated mannose-functionalized Aib-peptide as the second component display similar features, thereby providing reproducible substrates suitable for the controlled display of bioactive carbohydrate ligands. The efficiency of such Aib-based SAMs as a biomolecular recognition platform was evidenced by examining the mannose-concanavalin A interaction via surface plasmon resonance biosensing.

Ultrasensitive and selective gold film-based detection of mercury (II) in tap water using a laser scanning confocal imaging-surface plasmon resonance system in real time

An ultrasensitive and selective detection of mercury (II) was investigated using a laser scanning confocal imaging-surface plasmon resonance system (LSCI-SPR). The detection limit was as low as 0.01ng/ml for Hg(2+) ions in ultrapure and tap water based on a T-rich, single-stranded DNA (ssDNA)-modified gold film, which can be individually manipulated using specific T-Hg(2+)-T complex formation. The quenching intensity of the fluorescence images for rhodamine-labeled ssDNA fitted well with the changes in SPR. The changes varied with the Hg(2+) ion concentration, which is unaffected by the presence of other metal ions. The coefficients obtained for ultrapure and tap water were 0.99902 and 0.99512, respectively, for the linear part over a range of 0.01-100ng/ml. The results show that the double-effect sensor has potential for practical applications with ultra sensitivity and selectivity, especially in online or real-time monitoring of Hg(2+) ions pollution in tap water with the further improvement of portable LSCI-SPR instrument.

Nanoengineered glycan sensors enabling native glycoprofiling for medicinal applications: towards profiling glycoproteins without labeling or liberation steps

Nanoengineered glycan sensors may help realize the long-held goal of accurate and rapid glycoprotein profiling without labeling or glycan liberation steps. Current methods of profiling oligosaccharides displayed on protein surfaces, such as liquid chromatography, mass spectrometry, capillary electrophoresis, and microarray methods, are limited by sample pretreatment and quantitative accuracy. Microarrayed platforms can be improved with methods that better estimate kinetic parameters rather than simply reporting relative binding information. These quantitative glycan sensors are enabled by an emerging class of nanoengineered materials that differ in their mode of signal transduction from traditional methods. Platforms that respond to mass changes include a quartz crystal microbalance and cantilever sensors. Electronic response can be detected from electrochemical, field effect transistor, and pore impedance sensors. Optical methods include fluorescent frontal affinity chromatography, surface plasmon resonance methods, and fluorescent carbon nanotubes. After a very brief primer on glycobiology and its connection to medicine, these emerging systems are critically reviewed for their potential use as core sensors in future glycoprofiling tools.

Comparison of photo- and Cu(I)-catalyzed "click" chemistries for the formation of carbohydrate SPR interfaces

Understanding interactions of glycans with proteins in key biological events has seen the development of various analytical methods such as microarray techniques. Label-free approaches, such as surface plasmon resonance (SPR) techniques are particularly attractive and we explore here the potential of a novel interface composed of lamellar Ti/Au/silicon dioxide derivatized with sugars to probe lectin-sugar interactions by SPR. Two parallel surface functionalization strategies have been developed: one in which azide-functionalized surfaces are linked via a Cu(I) "click" method to alkynyl-derivatized glycan partners and another wherein perfluorophenyl azide-functionalized surfaces are reacted through a C-H insertion photocoupling reaction with underivatized glycans. The effectiveness of the two interfaces is assessed for their lectin-recognition abilities in an SPR format.

Site-directed antibody immobilization using a protein A-gold binding domain fusion protein for enhanced SPR immunosensing

We have implemented a novel strategy for the oriented immobilization of antibodies onto a gold surface based on the use of a fusion protein, the protein A-gold binding domain (PAG). PAG consists of a gold binding peptide (GBP) coupled to the immunoglobulin-binding domains of staphylococcal protein A. This fusion protein provides an easy and fast oriented immobilization of antibodies preserving its native structure, while leaving the antigen binding sites (Fab) freely exposed. Using this immobilization strategy, we have demonstrated the performance of the immunosensing of the human Growth Hormone by SPR. A limit of detection of 90 ng mL(-1) was obtained with an inter-chip variability lower than 7%. The comparison of this method with other strategies for the direct immobilization of antibodies over gold surfaces has showed the enhanced sensitivity provided by the PAG approach.

Comparison of free-solution and surface-immobilized molecular interactions using a single platform

While it is generally accepted that surface immobilization affects the binding properties of proteins, it has been difficult to quantify these effects due to the lack of technology capable of making affinity measurements with species tethered and in free solution on a single platform. Further, quantifying the interaction of binding pairs with widely differing masses has also been challenging, particularly when it is desirable to tether the high molecular weight protein. Here we describe the use of backscattering interferometry (BSI) to quantify the binding affinity of mannose and glucose to concanavalin A (ConA), a 106 KDa homotetramer protein, in free solution using picomoles of the protein. Using the same platform, BSI, we then studied the effect on the binding constants of the ConA-carbohydrate interactions upon chemically immobilizing ConA on the sensor surface. By varying the distances (0, 7.17, and 20.35 nm) of the ConA tether and comparing these results to the free-solution measurements, it has been possible to quantify the effect that protein immobilization has on binding. Our results indicate that the apparent binding affinity of the sugar-lectin pair increases as the distance between ConA and the surface decreases. These observations could lend insight as to why the affinity values reported in the literature sometimes vary significantly from one measurement technique to another.

In vitro selection of sialic acid specific RNA aptamer and its application to the rapid sensing of sialic acid modified sugars

Sialic acids (SAs) are located on the terminal positions of glycan on a cell surface, which play important role in the spread and metastasis of cancer cells and infection of pathogen. For their detection and diagnosis, the finding of SA specific ligand is an essential prerequisite. Here, RNA aptamer for N-acetylneuraminic acid (Neu5Ac), a representative of SAs, with the high affinity of 1.35 nM and the selectivity was screened by in vitro selection method. The strong binding of the screened aptamer was enough to protect the hydrolysis of Neu5Ac by neuraminidase with the stoichiometry of 1:1 molar ratio. For the rapid detection of SAs, the RNA aptamer was further engineered to the aptazyme sensor by conjugating with a ribozyme following the characterization of selected aptamer by RNase footprinting assay. Without additional desialylation, modification, or/and purification processes, the aptazyme indicated high catalytic activities in the presence of Neu5Ac over 20 µM in several minutes. Also, we observed that the aptazyme sensor shows high sensitivities to Neu5Ac-conjugated sugars as well as Neu5Ac monomer, but not in non-Neu5Ac modified sugars. The aptamer for Neu5Ac can support valuable tools in a wide range of bioanalytical applications as well as biosensors.

Exploring the effect of sialic acid orientation on ligand-receptor interactions

Here, we present the synthesis of two sialo-micelles to validate the significance of sialic acid orientation during specific carbohydrate-protein and carbohydrate-carbohydrate interactions. Our data clearly suggest that orientation of carboxylic acid and glycerol side chains of sialic acid moieties exert fine tuning of ligand-receptor interactions.

Sialic acid metabolism and sialyltransferases: natural functions and applications

Sialic acids are a family of negatively charged monosaccharides which are commonly presented as the terminal residues in glycans of the glycoconjugates on eukaryotic cell surface or as components of capsular polysaccharides or lipooligosaccharides of some pathogenic bacteria. Due to their important biological and pathological functions, the biosynthesis, activation, transfer, breaking down, and recycle of sialic acids are attracting increasing attention. The understanding of the sialic acid metabolism in eukaryotes and bacteria leads to the development of metabolic engineering approaches for elucidating the important functions of sialic acid in mammalian systems and for large-scale production of sialosides using engineered bacterial cells. As the key enzymes in biosynthesis of sialylated structures, sialyltransferases have been continuously identified from various sources and characterized. Protein crystal structures of seven sialyltransferases have been reported. Wild-type sialyltransferases and their mutants have been applied with or without other sialoside biosynthetic enzymes for producing complex sialic acid-containing oligosaccharides and glycoconjugates. This mini-review focuses on current understanding and applications of sialic acid metabolism and sialyltransferases.

Surface plasmon resonance imaging analysis of protein binding to a sialoside-based carbohydrate microarray

Monitoring multiple biological interactions in a multiplexed array format has numerous advantages. However, converting well-developed surface chemistry for spectroscopic measurements to array-based, high-throughput screening is not a trivial process and often proves to be the bottleneck in method development. This chapter reports the fabrication and characterization of a new carbohydrate microarray with synthetic sialosides for surface plasmon resonance imaging analysis of lectin-carbohydrate interactions. Contact printing of functional sialosides on neutravidin-coated surfaces was carried out and the properties of the resulting elements were characterized by fluorescence microscopy. Sambucus nigra agglutinin (SNA) was used for testing on four different carbohydrate-functionalized surfaces and differential binding was analyzed. Multiplexed detection of SNA/biotinylated sialoside interactions on arrays up to 400 elements has been performed with good data correlation, demonstrating the effectiveness of the biotin-neutravidin-based biointerface to control probe orientation for reproducible and efficient protein binding to carbohydrates.

Photogenerated lectin sensors produced by thiol-ene/yne photo-click chemistry in aqueous solution

The photoinitiated radical reactions between thiols and alkenes/alkynes (thiol-ene and thiol-yne chemistry) have been applied to a functionalization methodology to produce carbohydrate-presenting surfaces for analyses of biomolecular interactions. Polymer-coated quartz surfaces were functionalized with alkenes or alkynes in a straightforward photochemical procedure utilizing perfluorophenylazide (PFPA) chemistry. The alkene/alkyne surfaces were subsequently allowed to react with carbohydrate thiols in water under UV-irradiation. The reaction can be carried out in a drop of water directly on the surface without photoinitiator, and any disulfide side products were easily washed away after the functionalization process. The resulting carbohydrate-presenting surfaces were evaluated in real-time studies of protein-carbohydrate interactions using a quartz crystal microbalance (QCM) flow-through system with recurring injections of selected lectins, with intermediate regeneration steps using low pH buffer. The resulting methodology proved fast, efficient and scalable to high-throughput analysis formats, and the produced surfaces showed significant protein binding with expected selectivities of the lectins used in the study.

General consideration on sialic acid chemistry

Sialic acids, also known as neuraminic acids, are a family of negatively charged α-keto acids with a nine-carbon backbone. These unique sugars have been found at the termini of many glycan chains of vertebrate cell surface, which play pivotal roles in mediating or modulating a variety of physiological and pathological processes. This brief review covers general approaches for synthesizing sialic acid containing structures. Recently developed synthetic methods along with structural diversities and biological functions of sialic acid are discussed.

Synthesis and molecular recognition studies of the HNK-1 trisaccharide and related oligosaccharides. The specificity of monoclonal anti-HNK-1 antibodies as assessed by surface plasmon resonance and STD NMR

The human natural killer cell carbohydrate, HNK-1, plays function-conducive roles in peripheral nerve regeneration and synaptic plasticity. It is also the target of autoantibodies in polyneuropathies. It is thus important to synthesize structurally related HNK-1 carbohydrates for optimizing its function-conducive roles, and for diagnosis and neutralization of autoantibodies in the fatal Guillain-Barré syndrome. As a first step toward these goals, we have synthesized several HNK-1 carbohydrate derivatives to assess the specificity of monoclonal HNK-1 antibodies from rodents: 2-aminoethyl glycosides of selectively O-sulfated trisaccharide corresponding to the HNK-1 antigen, its nonsulfated analogue, and modified structures containing 3-O-fucosyl or 6-O-sulfo substituents in the N-acetylglucosamine residues. These were converted, together with several related oligosaccharides, into biotin-tagged probes to analyze the precise carbohydrate specificity of two anti-HNK-1 antibodies by surface plasmon resonance that revealed a crucial role of the glucuronic acid in antibody binding. The contribution of the different oligosaccharide moieties in the interaction was shown by saturation transfer difference (STD) NMR of the complex consisting of the HNK-1 pentasaccharide and the HNK-1 412 antibody.

Fluorescent labeling agents change binding profiles of glycan-binding proteins

Interactions of glycan-binding proteins (GBPs) with glycans are essential in cell adhesion, bacterial/viral infection, and cellular signaling pathways. Experimental characterization of these interactions based on glycan microarrays typically involves (1) labeling GBPs directly with fluorescent reagents before incubation with the microarrays, or (2) labeling GBPs with biotin before the incubation and detecting the captured GBPs after the incubation using fluorescently labeled streptavidin, or (3) detecting the captured GBPs after the incubation using fluorescently labeled antibodies raised against the GBPs. The fluorescent signal is mostly measured ex situ after excess fluorescent materials are washed off. In this study, by using a label-free optical scanner for glycan microarray detection, we measured binding curves of 7 plant lectins to 24 glycans: four β1-4-linked galactosides, three β1-3-linked galactosides, one β-linked galactoside, one α-linked N-acetylgalactosaminide, eight α2-3-linked sialosides, and seven α2-6-linked sialosides. From association and dissociation constants deduced by global-fitting the binding curves, we found that (1) labeling lectins directly with fluorescent agents change binding profiles of lectins, in some cases by orders of magnitude; (2) those lectin-glycan binding reactions characterized with large dissociation rates, though biologically relevant, are easily missed or deemed insignificant in ex situ fluorescence-based assays as most captured lectins are washed off before detection. This study highlights the importance of label-free real-time detection of protein-ligand interactions and the potential pitfall in interpreting fluorescence-based assays for characterization of protein-glycan interactions.

Profiling of influenza viruses by high-throughput carbohydrate membrane array

BACKGROUND

Carbohydrate-protein interactions participate in many biological functions. To characterize the binding interactions represents a longstanding challenge.

METHOD

We developed a glycan membrane array to study the interactions of carbohydrates with lectins, proteins and viruses, including 17 lectins, four antibodies (that are specific to different Lewis antigens), one recombinant H5N1 hemagglutinin, and five influenza B clinical isolates.

RESULTS

The results were found to be comparable to previous reports, indicating the efficacy and reliability of our developed method.

CONCLUSION

This carbohydrate membrane array represents a convenient, reliable and low-cost method to examine the carbohydrate-binding features of various proteins, high-throughput drug screening and the glycan-binding surveillance of influenza viruses.

Jacalin interaction with human immunoglobulin A1 and bovine immunoglobulin G1: affinity constant determined by piezoelectric biosensoring

The affinity of the D-galactose-binding lectin from Artocarpus heterophyllus lectin, known as jacalin, with immonuglobulins (Igs) was determined by biofunctionalization of a piezoelectric transducer. This piezoelectric biofunctionalized transducer was used as a mass-sensitive analytical tool, allowing the real-time binding analysis of jacalin-human immunoglobulin A1 (IgA(1)) and jacalin-bovine IgG(1) interactions from which the apparent affinity constant was calculated. The strategy was centered in immobilizing jacalin on the gold electrode's surface of the piezoelectric crystal resonator using appropriate procedures based on self-assembling of 11-mercaptoundecanoic acid and 2-mercaptoethanol thiol's mixture, a particular immobilization strategy by which it was possible to avoid cross-interaction between the proteins over electrode's surface. The apparent affinity constants obtained between jacalin-human IgA(1) and jacalin-bovine IgG(1) differed by 1 order of magnitude [(8.0 ± 0.9) 10(5) vs (8.3 ± 0.1) 10(6) L mol(-1)]. On the other hand, the difference found between human IgA(1) and human IgA(2) interaction with jacalin, eight times higher for IgA(1), was attributed to the presence of O-linked glycans in the IgA(1) hinge region, which is absent in IgA(2). Specific interaction of jacalin with O-glycans, proved to be present in the human IgA(1) and hypothetically present in bovine IgG(1) structures, is discussed as responsible for the obtained affinity values.

Aptamer-functionalized in situ injectable hydrogel for controlled protein release

Various in situ injectable hydrogels have been developed for protein delivery in treating human diseases. However, most hydrogels are highly permeable, which can lead to the rapid release of loaded proteins. The purpose of this study is to apply nucleic acid aptamers to functionalize an in situ injectable hydrogel model to control the release of proteins. The aptamers were studied using secondary structural predictions and binding analyses. The results showed that the structural predictions were different from the experimental measurements in numerous cases. The affinity of the aptamer was significantly affected by the mutations of the essential nucleotides, whereas it was not significantly affected by the variations of the nonessential nucleotides. The mutated aptamers were then used to functionalize the injectable hydrogel model. The results showed that the aptamer-functionalized hydrogel could prolong protein release. Moreover, the release rates could be controlled by adjusting the affinity of the aptamer.

Photo-click immobilization on quartz crystal microbalance sensors for selective carbohydrate-protein interaction analyses

A photoclick method based on azide photoligation and Cu-catalyzed azide-alkyne cycloaddition has been evaluated for the immobilization of carbohydrates to polymeric materials. The biomolecular recognition properties of the materials have been investigated with regard to applicable polymeric substrates and selectivity of protein binding. The method was used to functionalize a range of polymeric surfaces (polystyrene, polyacrylamide, poly(ethylene glycol), poly(2-ethyl-2-oxazoline), and polypropene) with various carbohydrate structures (based on α-D-mannose, β-D-galactose, and N-acetyl-β-D-glucosamine). The functionalized surfaces were evaluated in real-time studies of protein-carbohydrate interactions using a quartz crystal microbalance flow-through system with a series of different carbohydrate-binding proteins (lectins). The method proved to be robust and versatile, resulting in a range of efficient sensors showing high and predictable protein selectivities.

New technologies for glycomic analysis: toward a systematic understanding of the glycome

Carbohydrates are the most difficult class of biological molecules to study by high-throughput methods owing to the chemical similarities between the constituent monosaccharide building blocks, template-less biosynthesis, and the lack of clearly identifiable consensus sequences for the glycan modification of cohorts of glycoproteins. These molecules are crucial for a wide variety of cellular processes ranging from cell-cell communication to immunity, and they are altered in disease states such as cancer and inflammation. Thus, there has been a dedicated effort to develop glycan analysis into a high-throughput analytical field termed glycomics. Herein we highlight major advances in applying separation, mass spectrometry, and microarray methods to the fields of glycomics and glycoproteomics. These new analytical techniques are rapidly advancing our understanding of the importance of glycosylation in biology and disease.

SPR-based single nucleotide mismatch biosensor

The detection and characterization of the hybridization event of 21-base, unlabeled DNA oligonucleotides with a monolayer of complementary DNA immobilized on a gold surface, by electrochemical impedance spectroscopy and surface plasmon resonance (SPR) is presented. A thiol modification on the probe DNA strand allowed for its attachment to the surface via self-assembly. For the hybridization of full match target DNA a detection limit of 20 pM was determined. RNA hybridization was also detectable with the same sensor, with a similar detection limit. The SPR signal generated upon hybridization of the full match was always distinguishable from the single mismatch target DNA oligonucleotides when the mismatch was in the middle or at the proximal end of the target DNA sequence. However, the response of the sensor was identical for the hybridization of the full match and the distal end mismatch. The SPR sensor described is reusable over at least 20 hybridization/regeneration cycles and is insensitive to flow rate (20-800 µL min-1) or temperature (20-60 °C). Based on the SPR response, the surface density of the probe was estimated to be at least 4.3 × 1012 molecules per cm2.