Stable capillary coating with successive multiple ionic polymer layers

Sulfonic Functionalized Polydopamine Coatings with pH-Independent Surface Charge for Optimizing Capillary Electrophoretic Separations

Enhancing the pH-independence and controlling the magnitude of electroosmotic flow (EOF) are critical for highly efficient and reproducible capillary electrophoresis (CE) separations. Herein, we present a novel capillary modification method utilizing sulfonated periodate-induced polydopamine (SPD) coating to achieve pH-independent and highly reproducible cathodic EOF in CE. The SPD-coated capillaries were obtained through post-sulfonation treatment of periodate-induced PDA (PDA-SP) coatings adhered on the capillary inner surface. The successful immobilization of the SPD coating and the substantial grafting of sulfonic acid groups were confirmed by a series of characterization techniques. The excellent capability of PDA-SP@capillary in masking silanol groups and maintaining a highly robust EOF mobility was verified. Additionally, the parameters of sulfonation affecting the EOF mobilities were thoroughly examined. The obtained optimum SPD-coated column offered the anticipated highly pH-independent and high-strength cathodic EOF, which is essential for enhancing the CE separation performance and improving analysis efficiency. Consequently, the developed SPD-coated capillaries enabled successful high-efficiency separation of aromatic acids and nucleosides and rapid cyclodextrin-based chiral analysis of racemic drugs. Moreover, the SPD-coated columns exhibited a long lifetime and demonstrated good intra-day, inter-day, and column-to-column repeatability.

Capillary electrophoresis-mass spectrometry for protein analyses under native conditions: Current progress and perspectives

Native mass spectrometry is a rapidly emerging technique for fast and sensitive structural analysis of protein constructs, maintaining the protein higher order structure. The coupling with electromigration separation techniques under native conditions enables the characterization of proteoforms and highly complex protein mixtures. In this review, we present an overview of current native CE-MS technology. First, the status of native separation conditions is described for capillary zone electrophoresis (CZE), affinity capillary electrophoresis (ACE), and capillary isoelectric focusing (CIEF), as well as their chip-based formats, including essential parameters such as electrolyte composition and capillary coatings. Further, conditions required for native ESI-MS of (large) protein constructs, including instrumental parameters of QTOF and Orbitrap systems, as well as requirements for native CE-MS interfacing are presented. On this basis, methods and applications of the different modes of native CE-MS are summarized and discussed in the context of biological, medical, and biopharmaceutical questions. Finally, key achievements are highlighted and concluded, while remaining challenges are pointed out.

Chemical vapour deposition in narrow capillaries: Electro-osmotic flow control in capillary electrophoresis

BACKGROUND

In capillary electrophoresis (CE), the inner surface of fused-silica capillaries is commonly covalently modified with liquid silanes to control electroosmotic flow (EOF). This liquid phase deposition (LPD) approach is challenging for long and narrow-diameter capillaries (≥1 m, ≤25 μm ID) inhibiting commercial production. Here, we use chemical vapour deposition (CVD) to covalently modify capillaries with different silanes. Using a home-built CVD device, capillaries were modified with neutral (3-glycidyloxypropyl) trimethoxysilane (GPTMS), the weak base (3-aminopropyl) trimethoxysilane (APTMS), the weak acid 3-mercaptopropyltrimethoxysilane (MPTMS) and the neutral hydrophobic trichloro(1H,1H,2H,2H-perfluorooctyl) silane (PFOCTS). Gas-phase modification of GPTMS with acid and ammonia allowed further modification of the surface prior to molecular layer deposition (MLD) of poly(p-phenylene terephthalamide) (PPTA) using the self-limiting sequential reaction between terephthalaldehyde (TA) and p-phenylenediamine (PD) vapours.

RESULTS

Capillaries coated with GPTMS by CVD showed a greater reduction in EOF at all pH values than the conventional LPD. APTMS showed a reduction of the EOF at pH 9, with EOF reversal observed below pH 6. MPTMS provided a slightly lower EOF than an unmodified capillary at high pH, and a slightly higher EOF at lower pH. PFOCTS provided the most consistent EOF as a function of pH. The deposition of successive layers of PPTA resulted in increased surface coverage of the polymer and a greater reduction in EOF at pH higher than 5. The stability of a 10 μm ID GPTMS coated capillary was tested at pH 8.8 in a 200 mM CHES/Tris BGE for the separation of inorganic anions. Over 1.5 months of continuous operation (≈4130 runs), the reproducibility of the apparent mobilities for chloride, nitrite, nitrate and sulfate were 2.43%, 2.56%, 2.63% and 3.05%, respectively. The intra-day and inter-day column-to-column reproducibility and batch-to-batch reproducibility for all the coated capillaries ranged between 0.34% and 3.95%.

SIGNIFICANCE

The study demonstrates the superior performance of CVD coating for suppressing the EOF compared to LPD allowing the easy modification of long lengths of narrow capillary. The variation in silane, and the ability of MLD to modify and control the surface chemistry, provides a simple and facile method for surface modification. The stability of these coatings will allow long-term capillary electrophoresis monitoring of water chemistry, such as for monitoring fertiliser run-off in natural waters.

Polyelectrolyte Multilayers in Capillary Electrophoresis

Capillary electrophoresis (CE) has been proven to be a performant analytical method to analyze both small and macro molecules. Indeed, it is capable of separating compounds of the same nature according to differences in their charge to size ratios, particularly proteins, monoclonal antibodies and peptides. However, one of the major obstacles to reach high separation efficiency remains the adsorption of solutes on the capillary wall. Among the different coating approaches used to control and minimize solute adsorption, polyelectrolyte multilayers can be applied to CE as a versatile approach. These coatings are made up of alternating layers of polycations and polyanions, and may be used in acidic, neutral or basic conditions depending on the solutes to be analyzed. This Review provides an overview of Successive Multiple Ionic-polymer Layer (SMIL) coatings used in CE, looking at how different parameters induce variations on the electro-osmotic flow (EOF), separation efficiency and coating stability, as well as their promising applications in the biopharmaceutical field.

Chiral separation using cyclodextrins as mobile phase additives in open-tubular liquid chromatography with a pseudophase coating

The chiral separation of various analytes (dichlorprop, mecoprop, ibuprofen, and ketoprofen) was demonstrated with different cyclodextrins as mobile phase additives in open‐tubular liquid chromatography using a stationary pseudophase semipermanent coating. The stable coating was prepared by a successive multiple ionic layer approach using poly(diallyldimethylammonium chloride), polystyrene sulfonate, and didodecyldimethyl ammonium bromide. Increasing concentrations (0–0.2 mM) of various native and derivatized cyclodextrins in 25 mM sodium tetraborate (pH 9.2) were investigated. Chiral separation was achieved for the four test analytes using 0.05–0.1 mM β‐cyclodextrin (resolution between 1.11 and 1.34), γ‐cyclodextrin (resolution between 0.78 and 1.27), carboxymethyl‐β‐cyclodextrin (resolution between 1.64 and 2.59), and 2‐hydroxypropyl‐β‐cyclodextrin (resolution between 0.71 and 1.76) with the highest resolutions obtained with 0.1 mM carboxymethyl‐β‐cyclodextrin. %RSD values were <10%. This is the first demonstration of chiral open‐tubular liquid chromatography using achiral chromatographic coatings and cyclodextrins as mobile phase additives.

Successive Multiple Ionic-Polymer Layer Coatings for Intact Protein Analysis by Capillary Zone Electrophoresis-Mass Spectrometry: Application to Hemoglobin Analysis

Adsorption of analytes, e.g., proteins, often interfere with separation in CE, due to the relatively large surface of the narrow capillary. Coatings often are applied to prevent adsorption and to determine the electroosmotic flow (EOF), which is of major importance for the separation in CE. Successive multiple ionic-polymer layer (SMIL) coatings are frequently used for protein analysis in capillary electrophoresis resulting in high separation efficiency and repeatability. Here, the coating procedure of a five-layer SMIL coating is described using quaternized diethylaminoethyl dextran (DEAEDq) as polycation and poly(methacrylic acid) (PMA) as polyanion. Depending on the analyte, different polyions may be used to increase separation efficiency. However, the coating procedure remains the same.To demonstrate the applicability of SMIL coatings in CE-MS, human hemoglobin was measured in a BGE containing 2 M acetic acid. DEAEDq-PMA coating was found to be the most suitable for hemoglobin analysis due to relatively low reversed electroosmotic mobility leading to increased electrophoretic resolution of closely related proteoforms. Thereby, not only alpha and beta subunit of the hemoglobin could be separated, but also positional isoforms of glycated and carbamylated species were separated within 24 min.

Analysis of intact proteins with capillary zone electrophoresis coupled to mass spectromery using uncoated and coated capillaries

Although, in general, the application of coated capillaries is recommended for the separation of intact proteins, bare silica capillary is still the most often used capillary due to its simplicity and cheapness. In this work, the performance of bare fused silica capillary for intact protein analysis was compared to that of different (dynamically coated polybrene (PB) and permanently coated linear polyacrylamide (LPA)) coated capillaries using capillary zone electrophoresis - mass spectrometry (CZE-MS). In cases where low pH (pH=1.8) was used in bare silica capillaries, good precision (0.56-0.78 RSD% and 1.7-6.5 RSD% for migration times and peak areas, respectively), minimal adsorption and separation efficiency (N= 27 000/m - 322 000/m) similar to or even better than those obtained with the coated capillaries (created by an intricate multi-step process) was achieved. The PB and the LPA capillaries demonstrated their slightly better resolving power in terms of separating the different forms/variants of the same protein (e.g., hemoglobin subunits). Among the studied capillaries the one with LPA coating showed the most stable separations in the long term (n=25: 0.18-0.49 RSD% and 3.1-4.9 RSD% for migration times and peak areas, respectively). For the separation of a few proteins or even a larger number of proteins in biological samples (e.g., snake venom) the application of the simple and cheap bare fused silica capillary can be considered as an efficient choice.

Protein mapping of peanut extract with capillary electrophoresis

Protein separation can be achieved with different modes of capillary electrophoresis, such as with capillary gel electroporesis (CGE) or with capillary zone electrophoresis (CZE). CZE protein mapping of peanut extract was approached in four different ways, combining neutral-coated or multilayer-coated capillaries with pHs well over or under the isoelectric point range of the proteins of interest. At acidic pHs, the mobility ranges of the major peanut allergens Ara h1, Ara h2, Ara h3, and Ara h6 were identified. Although the pH is a major factor in CZE separation, buffers with different compositions but with the same pH and ionic strength showed significantly different resolutions. Different components of the electrolyte were studied in a multifactorial design of experiment. CE-SDS and CZE proved to be suitable for protein mapping and we were able to distinguish different batches of peanut extract and burned peanut extract.

HPLC Separation of Phenolic Acids on Silica Gels Layer-by-Layer Modified with 6,10-Ionene and Dextran Sulfate

Using phenolic acids as an example, we continue to study the nature of the previously obtained multilayer sorbents for HPLC—silica gels modified up to two times with 6,10-ionene and dextran sulfate (DS). The chromatographic behavior of this class of compounds on the obtained sorbents was studied. A six-component mixture of sorbic, vanillic, sinapic, $p$ -coumaric, caffeic, and ferulic acids was separated on the silica gel twice modified with 6,10-ionene and dextran sulfate in 15 min with a selectivity of up to 1.88 and a column efficiency of up to 26000 theoretical plates per meter. The possibility of separating the two classes of compounds—phenolic acids and basic nitrogen-containing pharmaceuticals—in a single mixture on silica gel, twice modified with 6,10-ionene and dextran sulfate, is shown.

A gold foil covered fused silica capillary tip as a sheathless interface for coupling capillary electrophoresis-mass spectrometry

A method for the preparation of an on-column ESI emitter used as the sheathless interface for coupling capillary electrophoresis (CE) with mass spectrometry (MS) was developed. The emitter was directly fabricated at the outlet end of the separation capillary which was etched with HF solution to a symmetrical tip. The tip was covered with a small piece of gold foil which was fixed by epoxy resin glue for electrical contact. Such a prepared ESI emitter can produce a stable ESI signal over the wide range of flow rate from 50 nL/min to 800 nL/min. The performance of the CE-MS with the sheathless interface was evaluated by using the separation of four alkaloids. It was found that the strong electroosmotic flow produced by the multiple polyelectrolyte coating on the capillary is necessary for maintaining a stable MS signal. Effect of the running buffer composition, concentration and the CE separation voltages on the ESI signal strength were investigated. The absolute detection limits for the alkaloids was determined as fmol level. Moreover, the CE-MS was applied for the analyses of trypsin digestion of cytochrome C and small molecular organic anions. The emitter performed very stable with a lifetime of at least 180 h.

Monitoring of transferrin isoforms in biological samples by capillary electrophoresis

Work dealing with the monitoring of transferrin isoforms in human serum and other body fluids by capillary electrophoresis is reviewed. It comprises capillary zone electrophoresis and capillary isoelectric focusing efforts that led to the exploration and use of assays for the determination of carbohydrate-deficient transferrin as a marker for excessive alcohol intake, genetic variants of transferrin, congenital disorders of glycosylation and β-2-transferrin, which is a marker for cerebrospinal fluid leakage. This paper provides insight into the development, specifications, strengths, weaknesses, and routine use of the currently known capillary electrophoresis based assays suitable to detect transferrin isoforms in body fluids. The achievements reached so far indicate that capillary zone electrophoresis is an attractive technology to monitor the molecular forms of transferrin in biological specimens as the assays do not require an elaborate sample pretreatment and thus can be fully automated for high-throughput analyses on multicapillary instruments. Assays based on capillary isoelectric focusing are less attractive. They require immunoextraction of transferrin from the biological matrix and mobilization after focusing if instrumentation with a whole-column imaging detector is not available. Interactions of the carrier ampholytes with the iron of transferrin may prevent iron saturation and thus provide more complicated isoform patterns.

Recent advances in protein analysis by capillary and microchip electrophoresis

This review article describes the significant recent advances in the analysis of proteins by capillary and microchip electrophoresis during the period from mid-2014 to early 2017. This review highlights the progressions, new methodologies, innovative instrumental modifications, and challenges for efficient protein analysis in human specimens, animal tissues, and plant samples. The protein analysis fields covered in this review include analysis of native, reduced, and denatured proteins in addition to Western blotting, protein therapeutics and proteomics.

Mapping molecular adhesion sites inside SMIL coated capillaries using atomic force microscopy recognition imaging

Capillary zone electrophoresis (CZE) is a powerful analytical technique for fast and efficient separation of different analytes ranging from small inorganic ions to large proteins. However electrophoretic resolution significantly depends on the coating of the inner capillary surface. High technical efforts like Successive Multiple Ionic Polymer Layer (SMIL) generation have been taken to develop stable coatings with switchable surface charges fulfilling the requirements needed for optimal separation. Although the performance can be easily proven in normalized test runs, characterization of the coating itself remains challenging. Atomic force microscopy (AFM) allows for topographical investigation of biological and analytical relevant surfaces with nanometer resolution and yields information about the surface roughness and homogeneity. Upgrading the scanning tip to a molecular biosensor by adhesive molecules (like partly inverted charged molecules) allows for performing topography and recognition imaging (TREC). As a result, simultaneously acquired sample topography and adhesion maps can be recorded. We optimized this technique for electrophoresis capillaries and investigated the charge distribution of differently composed and treated SMIL coatings. By using the positively charged protein avidin as a single molecule sensor, we compared these SMIL coatings with respect to negative charges, resulting in adhesion maps with nanometer resolution. The capability of TREC as a functional investigation technique at the nanoscale was successfully demonstrated.

Determination of pyruvate and lactate as potential biomarkers of embryo viability in assisted reproduction by capillary electrophoresis with contactless conductivity detection

Human-assisted reproduction is increasing in importance due to the constantly rising number of couples suffering from infertility issue. A key step in in vitro fertilization is the proper assessment of embryo viability in order to select the embryo with the highest likelihood of resulting in a pregnancy. This study proposes a method based on CE with contactless conductivity detection for the determination of pyruvate and lactate in spent culture media used in human-assisted reproduction. A fused-silica capillary of 64.0 cm total length and 50 μm inner diameter was used. The inner capillary wall was modified by the coating of successive layers of the ionic polymers polybrene and dextran sulfate to reverse EOF. The BGE was composed of 10 mM MES/lithium hydroxide, pH 6.50. The sample was injected by pressure 50 mbar for 18 s, separation voltage was set to -24 kV, and capillary temperature to 15°C. The presented method requires only 2 μL of the culture medium, with LODs for pyruvate and lactate of 0.03 and 0.02 μM, respectively. The results demonstrated the method's suitability for the analysis of spent culture media to support embryo viability assessment by light microscopy, providing information about key metabolites of the energy metabolism of a developing embryo.

Layer-by-Layer Assembly of Polysaccharides and 6,10-Ionene for Separation of Nitrogen-Containing Pharmaceuticals and Their Enantiorecognition by Capillary Electrophoresis

Two silica capillaries modified layer-by-layer with 6,10-ionene and N-(3-sulfo-3-carboxy)-propionylchitosan (SCPC) and with 6,10-ionene and dextran sulfate (DS) were prepared and investigated. Dynamic coating of the capillary efficiently reduces the adsorption of the background electrolyte, sample matrix components, and analytes on its inner wall. Such coatings effect good reproducibility and sensitivity of determination. We demonstrate that separation of betablockers, calcium channel blockers, alpha-adrenergic agonists, H1-blockers, and diuretics was the most efficient and rapid separation with a capillary modified with dextran sulfate. Tetrahydrozoline, carbinoxamine, and furacilin, which are commonly employed as treatments for allergic rhinitis, were identified in human urea. Their concentrations, independently verified by HPLC, were found to be5.3±0.8,6.6±0.5, and0.9±0.2 μg mL−1, withLOD=0.07, 0.03, 0.10 μg mL−1, andLOQ=1.0, 0.8, 0.6 μg mL−1, respectively.

Analysis of endogenous nucleotides by single cell capillary electrophoresis-mass spectrometry

Analytical technologies that enable investigations at the single cell level facilitate a range of studies; here a lab-fabricated capillary electrophoresis-electrospray ionization-mass spectrometry (CE-ESI-MS) platform was used to analyze anionic metabolites from individual Aplysia californica neurons. The system employs a customized coaxial sheath-flow nanospray interface connected to a separation capillary, with the sheath liquid and separation buffer optimized to ensure a stable spray. The method provided good repeatability of separation and reliable detection sensitivity for 16 mono-, di- and triphosphate nucleosides. For a range of anionic analytes, including cyclic adenosine monophosphate (cAMP), adenosine diphosphate (ADP) and adenosine triphosphate (ATP), the detection limits were in the low nanomolar range (<22 nM). A large Aplysia R2 neuron was used to demonstrate the ability of CE-ESI-MS to quantitatively characterize anionic metabolites within individual cells, with 15 nucleotides and derivatives detected. Following the method validation process, we probed smaller, 60 μm diameter Aplysia sensory neurons where sample stacking was used as a simple on-line analyte preconcentration approach. The calculated energy balance ([ATP] + 0.5 × [ADP])/([AMP] + [ADP] + [ATP]) of these cells was comparable with the value obtained from bulk samples.

Dynamic coating capillary electrophoresis for separation of humic acid using mixture solution of non-ionic polymers both as coating agent and separation medium

A simple, rapid, and precise dynamic coating capillary electrophoretic separation method for water-soluble humic substances is proposed. An aqueous solution containing hydroxyethyl cellulose (HEC), polyethylene glycol (PEG), and pH buffer component was employed for both the dynamic coating agent and the separation medium. The procedure for the coating of the capillary inner wall was simply filling the buffered polymer mixture solution into the capillary that had been treated with 1 M aqueous HCl solution. The solution for the capillary coating was directly used as the electrophoretic buffer solution for CE separation. Excellent performance for the separation of humic acid was obtained using the solution containing 0.5% (w/v) HEC, 1.0% (w/v) PEG 10000, and 0.1% (w/v) PEG 8000000. Excellent reproducibility and durability were obtained even at slightly alkaline conditions at pH levels above 8. The separation of 0.1 - 2 kbp of DNA ladder by the proposed method showed was also achieved.

Optimization of the enantioseparation of a diaryl-pyrazole sulfonamide derivative by capillary electrophoresis in a dual CD mode using experimental design

A CE method using dual cationic and neutral cyclodextrins (CD) was optimized for the enantiomeric separation of a compound presenting a diaryl sulfonamide group. Preliminary studies were made to select the optimal CDs and pH of the BGE. Two CDs (amino-β-CD and β-CD) were selected to separate the enantiomers in a 67 mM phosphate buffer at pH 7.4. However, the repeatability of the analyses obtained on bare-fused silica capillary was not acceptable owing to the adsorption of the amino-β-CD to the capillary. To prevent this, a dynamic coating of the capillary was used employing five layers of ionic-polymer (poly(diallyldimethylammonium) chloride (PDADMAC) and poly(sodium 4-styrenesulfonate). The efficiency of the coating was assessed by measuring the EOF stability. Repeatability of the injections was obtained when intermediate coating with PDADMAC was performed between each run. Secondly, this enantioseparation method was optimized using a central composite circumscribed design including three factors: amino-β-CD and β-CD concentrations and the percentage of methanol. Under the optimal conditions (i.e. 16.6 mM of amino-β-CD, 2.6 mM of β-CD, 0% MeOH in 67 mM phosphate buffer (pH 7.4) as BGE, cathodic injection 0.5 psi, 5 s, separation voltage 15 kV and a temperature of 15°C), complete enantioresolution of the analyte was obtained. It is worth mentioning that the design of experiments (DOE) protocol employed showed a significant interaction between CDs, highlighting the utility of DOE in method development. Finally, small variations in the ionic-polymer concentrations did not significantly influence the EOF, confirming the robustness of the coating method.

High-sensitivity analysis of anionic sulfonamides by capillary electrophoresis using a synergistic stacking approach

A synergistic stacking approach whereby field-enhanced sample injection and micelle-to-solvent stacking in capillary zone electrophoresis are combined has been developed and has been applied to the separation and quantification of anionic sulfonamides. Electrokinetic injection of the sample in a low conductivity alkaline diluent was performed for 90s at -15kV. Micelle-to-solvent stacking was then undertaken by hydrodynamic injection of micellar cetyltrimethylammonium bromide solution prior to the electrokinetic injection of sample that also contained 50% methanol. This combined stacking approach, when compared to a typical hydrostatic injection, provided improvements in peak height and corrected peak area in the range of 397-1024 and 758-1246, respectively. Limits of quantification in the range of 0.01-0.03μg/mL were obtained for sulfamerazine, sulfamethazine and sulfamethizole and were sufficient for the determination of these analytes in river water. The percentage recovery and accuracy values obtained for a fortified river water sample that had been subjected to sample preparation by evaporation and reconstitution with diluent were 74-135%. Intra-day and inter-day repeatabilities for migration time, peak height, and corrected peak area were in the range 0.5-5.0% (percentage relative standard deviation, n=8) and these relatively low values were attributed to the use of a stable capillary coating established by the successive multiple ionic-polymer layer technique.

Zero net-flow in capillary electrophoresis using acrylamide based hydrogel

Zero net-flow was observed when acrylamide based hydrogel was used in a vial at one end of a fused-silica capillary during electrophoresis with electroosmotic flow.

The coating of smart pH-responsive polyelectrolyte brushes in capillary and its application in CE

A novel pH-responsive coating technique was developed and applied to CE successfully in this paper. The coating was formed by bonding mixed opposite charge poly(acrylic acid) and poly(2-vinylpyridine) randomly onto the inner wall of a silica capillary. The coating processes were first characterized by ellipsometry and atomic force microscopy at macroscale and microscale, respectively. Measurements of EOF were implemented to confirm the coating. Direction and velocity of EOF became controllable from negative to positive, showing a perfect sigmoidal curve as the coating net charges alternated by the pH of BGE. The control of the EOF makes it possible to analyze different kinds of small molecules, peptides, and proteins successfully in the same capillary. Results showed that the stability and reproducibility for separations of fluoroquinolone standards were satisfactory for more than a hundred separations. A series of basic and acidic protein standards were separated with admirable efficiency and minimal adsorption using both polarities. The separation of tryptic BSA digest showed that the prepared capillary has immense potential in analyzing a single sample with both acidic and basic separations, which achieved the expectation in proteomics study by CE-MS.

Highly charged polyelectrolyte coatings to prevent adsorption during protein and peptide analysis in capillary electrophoresis

Capillary electrophoresis (CE) is an interesting technique for protein and peptide analysis. However, one of the major problems concerns sample adsorption on the internal capillary wall. The use of non-covalent coatings using highly charged polyelectrolytes is an efficient, simple, and fast approach to reduce peptide and protein adsorption phenomena. We have studied in a systematic manner the effect of coating conditions on the stability and efficiency of multilayer coatings using poly(diallyldimethylammonium) chloride (PDADMAC) as polycation and polystyrene sulfonate (PSS) as polyanion. When optimal conditions defined in the protocols are used, very stable coatings are obtained and adsorption phenomena are eliminated. The coatings are stable over a large range of pH buffer (2-10) and in the presence of organic solvent. Hundreds of analyses can be performed without coating regeneration. Coated capillaries can be easily stored and reused.

Electrophoretic separations in poly(dimethylsiloxane) microchips using mixtures of ionic, nonionic and zwitterionic surfactants

The use of surfactant mixtures to affect both EOF and separation selectivity in electrophoresis with PDMS substrates is reported, and capacitively coupled contactless conductivity detection is introduced for EOF measurement on PDMS microchips. First, the EOF was measured for two nonionic surfactants (Tween 20 and Triton X-100), mixed ionic/nonionic surfactant systems (SDS/Tween 20 and SDS/Triton X-100), and finally for the first time, mixed zwitterionic/nonionic surfactant systems (TDAPS/Tween 20 and TDAPS/Triton X-100). EOF for the nonionic surfactants decreased with increasing surfactant concentration. The addition of SDS or TDAPS to a nonionic surfactant increased EOF. After establishing the EOF behavior, the separation of model catecholamines was explored to show the impact on separations. Similar analyte resolution with greater peak heights was achieved with mixed surfactant systems containing Tween 20 and TDAPS relative to the single surfactant system. Finally, the detection of catecholamine release from PC12 cells by stimulation with 80 mM K(+) was performed to demonstrate the usefulness of mixed surfactant systems to provide resolution of biological compounds in complex samples.

Capillary zone electrophoresis as a tool to monitor the last stages of the degradation of water-sensitive polymers

In order to monitor the formation of the water-soluble by-products from chain-scission of degradable polymers used in the biomedical field, four capillary electrophoresis methods are discussed with the aim of giving the limits and performance for each. Three of them (electroosmotic flow reversal by dynamic adsorption of a polycation, multilayer polyelectrolyte coatings and physical binding of polyethylene oxide) are based on the use of dynamic coatings onto the inner surface of a fused silica capillary, a simple means to adapt performance to specific separations via modification and control of the electroosmotic flow of fused capillary. Using oligomers of lactic acid considered as standards the methods are compared. Other examples of ester-containing macromolecules (poly(hydroxybutyrate)), as well as degradable polyanions are described, namely N-acetylneuraminate polymer and poly(beta-malic acid).

Electrophoretic separations in poly(dimethylsiloxane) microchips using a mixture of ionic and zwitterionic surfactants

The use of mixtures of ionic and zwitterionic surfactants in poly(dimethylsiloxane) (PDMS) microchips is reported. The effect of surfactant concentration on electroosmotic flow (EOF) was studied for a single anionic surfactant (sodium dodecyl sulfate, SDS), a single zwitterionic surfactant (N-tetradecylammonium-N,N-dimethyl-3-ammonio-1-propanesulfonate, TDAPS), and a mixed SDS/TDAPS surfactant system. SDS increased the EOF as reported previously while TDAPS showed an initial increase in EOF followed by a reduction at higher concentrations. When TDAPS was added to a solution containing SDS, the EOF decreased in a concentration-dependent manner. The EOF for all three surfactant systems followed expected pH trends, with increasing EOF at higher pH. The mixed surfactant system allowed tuning of the EOF across a range of pH and concentration conditions. After establishing the EOF behavior, the adsorption/desorption kinetics were measured and showed a slower adsorption/desorption rate for TDAPS than SDS. Finally, the separation and electrochemical detection of model catecholamines in buffer and reduced glutathione in red blood cell lysate using the mixed surfactant system were explored. The mixed surfactant system provided shorter analysis times and/or improved resolution when compared to the single surfactant systems.

Simultaneous discrimination of jasmonic acid stereoisomers by CE-QTOF-MS employing the partial filling technique

Jasmonic acid (JA), an essential plant hormone controlling the plant defense signaling system and developmental processes, has stereospecific bioactivities that have not been well understood mainly due to the limitation in separation and detection methodologies. In this work, a fast CE-UV method based on short-end injection technique and a sensitive CE-QTOF-MS method based on partial filling technique were successfully developed for the enantioseparation of racemic JA. The successive coating technique was also involved by modifying the capillary with multiple ionic polymer layers of polybrene-dextran sulfate-polybrene. This was the first report on the direct resolution of both pairs of JA enantiomers, including two naturally occurring JA stereoisomers. Although no pure JA stereoisomers were commercially available, all the separated JA stereoisomers were identified indirectly by comparing the difference between the racemic standard and plant samples based on the presence and the ratio of each stereoisomer. Satisfactory results were obtained in terms of sensitivity (LOD, 24 ng/mL or 0.7 fmol for single JA stereoisomer) using 45 mmol/L ammonium acetate at pH 4.5 containing 70 mmol/L α-CD as the buffer system. This established CE-QTOF-MS method was later successfully applied for the study of the naturally occurring JA stereoisomers in wounded tobacco leaves.

Electrophoretic separation of neurotransmitters on a polystyrene nano-sphere∕polystyrene sulphonate coated poly(dimethylsiloxane) microchannel

In this paper, a poly(dimethylsiloxane) microchip with amperometric detector was developed for the electrophoretic separation and determination of neurotransmitters. For increasing the separation efficiency, the microchannel is modified by polystyrene sulphonate∕polystyrene nano-sphere self-assembly coating. A stable electro-osmotic flow (EOF) and higher separation efficiency are obtained in proposed modified microchannel. Under optimized conditions, dopamine, epinephrine, catechol, and serotonin are acceptably baseline separated in this 3.5 cm length separation channel with the theoretical plate number from 4.6 × 10(4) to 2.1 × 10(5) per meter and resolution from 1.29 to 12.5. The practicability of proposed microchip is validated by the recovery test with cerebrospinal fluid as real sample which resulted from 91.7% to 106.5%.